Precision grinding vises for uncompromising flat and profile grinding
Precision grinding vises, also known as toolmaker's vises, are high-accuracy clamping devices engineered for demanding flat and profile grinding as well as precision measuring and EDM processes, providing reliable part registration and thermal stability in metalworking. Manufactured from fully hardened, stress-relieved alloy steel and ground to thousandths of a millimetre, these vises enable flexible positioning on a magnetic chuck—flat, on the side or upright—without losing reference alignment, while an integrated downward draw mechanism presses the workpiece firmly and play-free to prevent lifting during clamping. For machining complex bevels and chamfers, sinus grinding vises used with standard parallel gauges allow exact angular setting, making them indispensable for achieving superior surface finish and dimensional accuracy in tool and mould making.
0-120mm Low-Profile Machine Vice, Precision 0.005mm Accuracy, 88x225x85mm - Vertex
Combining high precision, a 0–120 mm clamping range and a compact footprint, this low-profile vice supports repeatable clamping for measuring and light machining tasks. Benefit from a sturdy, manageable weight of 7 kg and precise control with 0.005 mm accuracy — order the vice directly via Metav Werkzeuge or ask our consultants if needed. VMV-35 – Low-profile vice by Vertex, 0–120 mm opening, high precision The VMV-35 is a low-height vice designed for precision clamping on benches and small-machine tables, suited to measurement tasks and light machining where space and repeatability matter. Compact footprint 88×225×85 mm 0–120 mm clamping range High precision: 0.005 mm accuracy Robust 7 kg construction Precise clamping for consistent measurement and machining The low-profile vice places emphasis on precision and repeatability: with a specified accuracy of 0.005 mm, the unit provides consistent positioning for tasks that require fine tolerances. The design reduces vertical profile while maintaining a full 0–120 mm clamping range, enabling accurate holding of workpieces during inspection or light machining. In practice, this means fewer repositioning errors and better conformity with measurement results, supporting efficient workflows in metrology-focused production and workshops. Space-saving design that improves bench efficiency With a compact footprint of 88 × 225 × 85 mm, the vice is designed to fit comfortably on crowded benches or small machine tables without compromising clamping range. Its comparatively light mass of 7 kg allows for straightforward relocation when rearranging workstations, yet the construction remains stable enough for precision tasks. The combination of modest size and generous opening helps integrate the vice into cells where space is scarce but precision cannot be sacrificed, optimising bench layout and easing handling during frequent inspection cycles. Built for dependable daily use in precision environments Intended for repetitive workshop use, the vice utilises a low-profile concept to provide dependable clamping with minimal interference during probing or machining operations. The clearly defined 0–120 mm opening and stated 0.005 mm accuracy support reproducible setups, reducing non-productive time spent on adjustments. Supplied under the Vertex name, the unit aligns with expectations for consistent quality and functional reliability in industrial metrology and light-production contexts, contributing to steady process outputs and reduced inspection variance. Contact Metav Werkzeuge in Emmerich for a technical consultation on the VMV-35 or to arrange procurement — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical overview Product: Low-profile vice Brand: Vertex SKU: VMV-35 GTIN: 4061905085086 Data Opening range: 0–120 mm Accuracy / repeatability: 0.005 mm Dimensions: 88×225×85 mm Weight: 7 kg eClass: 21020601 ETIM: EC002173 Special features Low-profile design Compact footprint for bench use Suitable for precision clamping and measurement tasks FAQ What clamping range does the vice offer? The vice provides a clamping range of 0–120 mm, making it suitable for a wide variety of small to medium workpieces that require secure holding. How precise is the positioning with this vice? The VMV-35 from Vertex is specified with an accuracy of 0.005 mm, supporting repeatable setups for inspection and light machining. What are the physical dimensions and weight? The vice measures 88×225×85 mm and weighs 7 kg, offering a compact footprint while remaining easy to reposition on a busy bench. Is this vice aimed at metrology or production tasks? The low-profile vice is intended for both measurement and light production applications where precision clamping and space-saving are priorities. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-121mm Precision Grinding Bench Vise With Threaded Spindle, SK2 Steel, 9.2kg - Vertex
High-precision clamping combined with robust SK2 construction and a smooth threaded spindle ensures consistent, repeatable results for precision machining. Benefit from the exacting 0.005 mm accuracy and the versatile 0–121 mm jaw opening for a reliable production flow. Order the VDV-35 directly via Metav Werkzeuge or ask our consultants if needed. VDV-35 Precision grinding vice — SK2 tool steel, threaded spindle, 0–121 mm opening (Vertex) The VDV-35 is a precision grinding vice with a threaded spindle, designed for secure clamping in milling and grinding applications within toolrooms and production workshops. High-precision accuracy 0.005 mm SK2 tool steel body for durability Jaw opening 0–121 mm for versatility Threaded spindle for smooth clamping Consistent precision for demanding machining The VDV-35 delivers a declared accuracy of 0.005 mm, providing the repeatability required for finishing and grinding operations. Such fine tolerance control reduces rework and supports adherence to tight component specifications. The declared accuracy refers to the vice’s ability to hold workpieces with minimal lateral and vertical deviation during clamping and machining, which makes it suitable for applications where dimensional consistency is essential. The vice's performance contributes directly to process reliability and improved first-pass yields. Robust construction that supports repeatable clamping Constructed from SK2 tool steel, the vice balances rigidity and wear resistance for long service life under regular use. The compact footprint (dimensions 88 x 250 x 73 mm) and a mass of 9.2 kg provide a stable base that resists vibration during machining. The jaw opening 0–121 mm accommodates a wide range of component sizes, enabling flexibility across small-series production and prototyping. These material and design choices minimise deformation under load and maintain clamping geometry over repeated cycles. Smooth threaded spindle for efficient operation A threaded spindle provides controlled, even pressure and fine adjustment during clamping, helping to protect delicate workpiece surfaces while ensuring adequate holding force for machining. The machine vice arrangement offers straightforward integration with standard machine tables, allowing for quick set-up and consistent alignment without complex fixtures. By combining reliable mechanical actuation with material robustness, the vice supports efficient workflows and reduces time lost to repositioning or inconsistent clamping. Contact Metav Werkzeuge to discuss the VDV-35 and define clamping needs; our specialists in Emmerich will advise on suitability, delivery options and technical specifications. Technical Data SKU: VDV-35 GTIN: 4061905085390 Brand: Vertex Facts Accuracy: 0.005 mm Weight: 9.2 kg Dimensions: 88 x 250 x 73 mm Jaw opening: 0–121 mm Special features Material: SK2 tool steel Product type: Precision grinding vice Spindle type: Threaded spindle eClass: 21020601 ETIM: EC002173 FAQ How accurate is the vice in daily operation? The VDV-35 achieves an accuracy of 0.005 mm, which ensures tight repeatability for finishing and grinding tasks where dimensional precision is critical. What workpiece sizes can be clamped? The jaw opening of 0–121 mm enables clamping of a broad range of small to medium components; the design is suitable for workshops requiring flexible part handling. What material is the vice made from and why does it matter? The vice is made from SK2 tool steel, offering wear resistance and stability that preserve clamping geometry and extend service life under regular machining loads. Is the VDV-35 suitable for use on grinding and milling machines? Yes. The VDV-35 is designed as a precision grinding vice and integrates readily with typical machine tables for both grinding and light milling operations. What are the physical dimensions and weight of the unit? The unit measures 88 x 250 x 73 mm and weighs 9.2 kg, providing a compact yet stable platform for precision clamping; Product SKU: VDV-35. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-125 mm Low-Profile Machine Vice, 0.005 mm Accuracy - Vertex
Take advantage of the combination of precise clamping, compact low-profile design and reliable repeatability to streamline machining setups and improve throughput; order the vice directly via Metav Werkzeuge or consult our specialists for application advice. VMV-40 Low-Profile Milling Vice – 0–125 mm jaw opening, 0.005 mm repeatability (Vertex) The VMV-40 is a low-profile milling vice designed for secure workpiece clamping on machine tables and milling heads, offering precise positioning for small to medium machining tasks. Precise clamping with 0–125 mm jaw opening Repeatable accuracy to 0.005 mm Solid 8.9 kg construction for stable setups Compact low-profile design for machine tables High-precision clamping that reduces rework The VMV-40 delivers repeatable accuracy down to 0.005 mm, ensuring consistent results across multiple setups. This level of precision reduces the need for re-measurement and rework, improving process efficiency and cutting tool life. The 0–125 mm jaw capacity covers a wide range of common workpieces, so fewer changeovers are required. For operators and shop managers, the technical benefit is clear: stable accuracy translates into predictable production quality and lower scrap rates. Compact form factor for interference-free machining A low-profile design keeps the clamping height minimised, preventing collisions with toolpaths and allowing closer approach of milling cutters and spindles. With a weight of 8.9 kg, the vice offers a balance between portability and stability, making it suitable for mobile fixtures as well as permanent machine-table mounting. The compact footprint simplifies fixturing on crowded tables, shortening setup time and enabling more efficient use of machine capacity. Robust integration and straightforward shop adoption Designed for workshop use and machine-tool environments, this clamping solution integrates with standard table fixtures and fixturing protocols. The model VMV-40 is identified by SKU VMV-40 and GTIN 4061905085277 for easy procurement and inventory tracking. Where precision and process reliability are priorities, the vice supports consistent part locating and repeatable clamping forces, which in turn stabilise machining forces and surface finish quality. Technical teams appreciate the clear specification set for quick inclusion into work instructions and quality documentation. For reliable, compact clamping put the Vertex VMV-40 on the short list — contact Metav Werkzeuge for application guidance or to request technical details via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: VMV-40 GTIN: 4061905085277 SKU: VMV-40 eClass: 21020601 ETIM: EC002173 Facts Jaw opening: 0–125 mm Accuracy: 0.005 mm Weight: 8.9 kg Dimensions: 98x23085mm Special features Low-profile vice design Designed for machine-tool clamping Brand: Vertex Suitable for precision workshop use FAQ What jaw capacity does the vice offer? The vice provides a 0–125 mm jaw opening, suitable for a wide range of small to medium workpieces. How precise is the clamping and positioning? The VMV-40 achieves repeatable positioning to 0.005 mm, supporting tight tolerances in serial or single-piece machining. Is the vice suitable for use on milling machines? Yes, the low-profile design is specifically intended for machine-table and milling applications where tool clearance is a concern. How heavy is the unit and what does that mean for stability? At 8.9 kg, the vice balances portability with sufficient mass to resist cutting forces and vibration during typical machining cycles. Can the VMV-40 be identified for ordering and inventory? The vice is listed under SKU VMV-40 and GTIN 4061905085277 for straightforward procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-157mm Low-Profile Machine Vice Precision 0.005mm Accuracy, 125x287x100mm - Vertex
Benefit from consistent 0.005 mm accuracy, a 0–157 mm clamping range and a compact footprint that saves machine table space; these characteristics combine to improve throughput and reduce rework. Order the vice via Metav Werkzeuge or contact our consultants for specification support. VMV-50 Low-profile machine vice — high accuracy 0.005 mm | 0–157 mm opening — Vertex A VMV-50 low-profile machine vice engineered for precise clamping on milling and machining centres, offering a compact design and reliable repeatability for demanding production environments. Precision repeatability 0.005 mm Clamping range 0–157 mm Solid 15.5 kg construction for stability Consistent precision that reduces rework The vice delivers accuracy 0.005 mm, giving a reliable baseline for repeat machining operations and reducing the need for costly rework. High repeatability supports tighter tolerances and steadier quality output, which translates into fewer inspection rejects and less downstream adjustment. For workshops aiming to improve first-pass yield, the combination of measured accuracy and stable clamping performance provides a clear efficiency gain. Space-saving design for modern machine tools With an external size of 125 x 287 x 100 mm, the unit occupies a compact footprint while still offering a wide effective clamping span. The low-profile form is suited to multi-axis machines and crowded tables where vertical clearance is restricted. This geometry enables closer stacking of workpieces and easier toolpath planning, increasing usable machine time without sacrificing accessibility or setup flexibility. Mass and build that improve surface finish and tool life A mass of 15.5 kg contributes to inherent damping and improved resistance to vibration during cutting operations. The resulting steadier workpiece support helps preserve tool life and enhances surface finish quality, particularly under intermittent cutting loads. Combined with the vice’s wide 0–157 mm clamping range, this stability is beneficial for both roughing and finishing passes where consistent clamping force and minimal movement are essential. For technical advice or to arrange supply of the Vertex VMV-50 low-profile machine vice, contact Metav Werkzeuge for product guidance and European delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMV-50 GTIN: 4061905085338 ECLASS: 21020601 ETIM: EC002173 Core specifications Opening: 0–157 mm Accuracy: 0.005 mm Dimensions: 125 x 287 x 100 mm Weight: 15.5 kg Features and standards Product type: Low-profile machine vice Manufacturer: Vertex Category: Vertex SKU: VMV-50 FAQ What level of precision can be expected from this machine vice? The Vertex VMV-50 low-profile machine vice is specified with an accuracy of 0.005 mm, providing the precision required for close-tolerance machining and repeatable set-ups. What clamping range does the vice provide and how does that affect part variety? The VMV-50 offers a 0–157 mm opening, enabling secure clamping of a broad range of workpiece sizes while maintaining a compact overall size suitable for varied batch production. Will the vice fit on standard milling machine tables? The vice’s dimensions (125 x 287 x 100 mm) and low profile are designed for compatibility with many standard milling and machining centre tables; the VMV-50’s compact form supports efficient fixturing and tool access. How does the weight of the vice influence machining stability? At 15.5 kg, the vice provides beneficial mass that helps damp vibration and stabilise the clamped workpiece, improving surface finish and reducing the risk of chatter during machining. Is the VMV-50 suitable for precision fixture setups in small shops and production cells? Yes, the VMV-50 low-profile machine vice by Vertex is particularly suited to environments where space is limited but precision and repeatability are required, offering a balance of accuracy and compactness. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-200 mm Low-Profile Precision Milling Vice 150x330x100mm, 0.005mm Accuracy - Vertex
Take advantage of the combination of a low-profile design, a 0–200 mm jaw opening and high repeatability ±0.005 mm to maintain efficient, precise clamping even in confined workspaces; order the vice directly via Metav Werkzeuge or ask our consultants if needed. VMV-60 low-profile vice — 0–200 mm jaw opening, repeatability ±0.005 mm The VMV-60 is a low-profile vice designed for accurate, space-saving clamping in workshop and industrial setups, suitable for bench mounting and fixtures. Low-profile design for tight setups 0–200 mm jaw opening High repeatability ±0.005 mm Precision that keeps production consistent The VMV-60 delivers precision where repeatable clamping matters. With a documented repeatability of ±0.005 mm, the vice stabilises workpieces for machining, inspection or assembly tasks that demand tight tolerances. This level of accuracy minimises set-up variation and reduces downstream rework, which improves throughput and lowers overall process costs. The technical specification for repeatability refers to the consistency of jaw positioning under repeated clamping cycles, ensuring parts are secured in the same location time after time without complex adjustments. Compact footprint for constrained workstations A low-profile form factor and compact external dimensions contribute to a small installed footprint, enabling clamping in crowded fixtures or on machines with limited vertical clearance. The 0–200 mm jaw opening provides flexibility for a wide range of component sizes without sacrificing stability, so larger batches or mixed-part workflows can be handled with the same clamping station. Reduced interference between toolpaths and the vise body also supports safer, more efficient machining operations in small cells. Robust handling and practical operation Heavy construction and a considered centre of mass support secure clamping under cutting forces. The vice’s mass contributes to stability during heavy-duty operations while remaining manageable for reconfiguration or fixture changes. Clear, maintenance-friendly surfaces and straightforward actuation reduce downtime and simplify integration into existing workstations. Where accuracy and uptime are priorities, the combination of stable mounting and precise jaw travel helps maintain part quality over long production runs. Contact Metav Werkzeuge in Emmerich for application advice, stock availability and tailored clamping solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMV-60 GTIN: 4061905095443 Manufacturer: Vertex Facts Dimensions: 150x330x100 mm Weight: 21.4 kg Jaw opening: 0–200 mm Accuracy / repeatability: 0.005 mm eClass: 21020601 ETIM: EC002173 Special features Low-profile vice design Suitable for bench mounting and fixture integration Robust mechanical construction FAQ What is the maximum jaw opening of the VMV-60 low-profile vice? The VMV-60 offers a jaw opening range of 0–200 mm, which accommodates a wide variety of component sizes for bench or fixture work. How precise is the clamping position with this vice? The vice achieves repeatability of ±0.005 mm, providing consistent positioning for precision machining and inspection tasks. Is the VMV-60 suitable for tight vertical clearances? Yes, the low-profile design of the VMV-60 makes it well suited to applications with limited vertical space while still delivering stable clamping. Can the vice be mounted to a machine table or fixture plate? The VMV-60 is designed for bench mounting and integration into fixture setups; ensure mounting provisions and clearances are compatible with the intended machine or table. Where can replacement parts or technical documentation be obtained? Technical documentation and spare parts information are available through Metav Werkzeuge; contact their technical team for details and supply options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-20mm Low-Profile Clamp Vice, Precision 25x65x30mm, 0.005mm Accuracy - Vertex
Compact low-profile vice with a 0–20 mm opening and 0.005 mm accuracy for repeatable clamping of small workpieces. Its 25×65×30 mm footprint and 0.3 kg weight support fast setup and simple fixture integration. Order the VMV-10 directly via Metav Werkzeuge or ask our consultants if needed. VMV-10 Low-profile machine vice by Vertex — 0–20 mm opening, 25×65×30 mm The VMV-10 is a compact low-profile machine vice designed for precise clamping of small components in machine tools and assembly jigs. Compact machine vice for small parts Opening range 0–20 mm Accuracy 0.005 mm for repeatable clamping Lightweight at 0.3 kg for fixture integration Precision clamping that reduces rework and scrap A low-profile vice designed for consistent results, the device delivers high precision thanks to an indicated accuracy of 0.005 mm. In practice, this level of precision means workpieces are held with minimal variation between operations, which reduces rework and maintains part tolerances across short production runs. The clamping principle is straightforward, making the vice suitable for users who require reliable repeatability without complex setup procedures. Small footprint for efficient production cells With external dimensions of 25×65×30 mm the vice takes very little space on a machine table or in a fixture. The compact design shortens setup times and frees capacity on milling or drilling stations, which contributes to faster cycle times in batch production. The 0–20 mm opening accommodates a variety of small parts while keeping the gripping height low, helping to maintain tool clearance and minimise interference during machining. Built to integrate into fixtures and jigs Weighing only 0.3 kg, this vice is easy to position within custom jigs or lightweight fixtures where mass and inertia must be kept down. The construction supports repeated clamping cycles with stable performance, promoting consistent part quality across batches. For operations that require quick changeovers, the vice’s compactness and repeatable clamping behaviour simplify tooling design and reduce the effort involved in fixture layout. Practical benefits for workshop and production use The VMV-10 combines compact design and measurable accuracy into a tool that supports both bench work and light machine-tool applications. For engineers and buyers, the key advantages are reliability in repeat clamping, ease of integration into existing setups, and a small footprint that optimises available workspace. Where reproducible positioning and straightforward handling are priorities, this vice provides an economical and technically sound solution. Contact Metav Werkzeuge for a technical specification or tailored recommendation for the VMV-10 low-profile machine vice — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant from our Emmerich quality team Technical data Article number: VMV-10 GTIN: 4061905085055 Manufacturer: Vertex Core specifications Opening range: 0–20 mm Accuracy: 0.005 mm Dimensions: 25×65×30 mm Weight: 0.3 kg Features and classifications Designation: Low-profile machine vice ECLASS: 21020601 ETIM: EC002173 FAQ What are the external dimensions of the vice? The vice measures 25×65×30 mm overall and is designed for compact fixture use with limited table space. What clamping range does the vice offer? The unit provides an opening range of 0–20 mm, suitable for small parts and precise positioning tasks. How precise is the clamping? The indicated accuracy for the vice is 0.005 mm, which supports repeatable clamping and consistent part tolerances. Is the vice suitable for integration into custom jigs? Yes, the VMV-10’s compact footprint and 0.3 kg weight make it well suited for integration into lightweight fixtures and jigs. Who manufactures this vice? The vice is manufactured by Vertex; the product is listed under SKU VMV-10 and GTIN 4061905085055. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-40 mm Low-Profile Machine Vice Precision 0.005mm Backlash, 36x100x40mm - Vertex
Take advantage of the compact footprint, 0–40 mm jaw opening and 0.005 mm parallelism to secure small parts precisely and maintain steady production. Order the vice directly via Metav Werkzeuge or consult the Metav team for tailored advice from their Emmerich base. VMV-15 Low-profile bench vice — compact precision clamping by Vertex The VMV-15 is a compact low-profile bench vice designed for precision clamping of small components in tight fixtures, inspection benches and light workshop tasks. Compact low-profile design for tight clamping spaces Jaw opening 0–40 mm for small workpieces High parallelism: 0.005 mm accuracy Lightweight 0.9 kg for quick positioning Precise alignment for repeatable results The compact vice offers 0.005 mm parallelism, which ensures repeatable contact between jaws and workpiece. For small-part machining and measuring tasks, this level of precision reduces setup variance and minimises rework by keeping the clamped surface consistently aligned. The combination of a narrow jaw opening and fine parallelism makes the device particularly suited to inspection fixtures and small assembly operations where reproducible clamping is essential. Fits into confined setups and portable workflows With external dimensions of 36x100x40 mm and a weight of 0.9 kg, the unit is optimised for workplaces where space is limited. The compact form factor enables integration into multi-station fixtures or portable test rigs without significantly increasing footprint. Lightweight handling supports rapid repositioning and short changeovers, helping to maintain throughput in small-batch environments while preserving setup accuracy. Practical design that supports workshop routines Designed as a low-profile clamping solution, the vice provides stable holding for delicate components and samples used in measurement and light machining. The simple geometry and small size facilitate easy incorporation into height-restricted setups and ensure that the clamped part remains accessible for inspection instruments and finishing operations. Built for everyday workshop use, the unit contributes to efficient process flows and dependable handling of small workpieces. Contact Metav Werkzeuge in Emmerich for personalised advice on Vertex VMV-15 low-profile bench vice and to discuss delivery and integration options for precise clamping tasks Technical data Article number: VMV-15 GTIN: 4061905085833 Brand: Vertex Facts Dimensions: 36x100x40 mm Jaw opening: 0–40 mm Accuracy (parallelism): 0.005 mm Weight: 0.9 kg Special features Type: Low-profile bench vice Classification: eClass 21020601 ETIM: EC002173 FAQ What size of workpiece can be clamped with this vice? The vice accommodates workpieces within a 0–40 mm jaw opening, suitable for small components and samples. Is the vice suitable for inspection and measuring tasks? Yes, the high parallelism of 0.005 mm makes the VMV-15 appropriate for inspection benches and precise measuring setups. How portable is the unit for mobile test rigs? At 0.9 kg and compact dimensions, the vice is lightweight enough for portable rigs and easy repositioning in multi-station workflows. Which product class and identifiers apply to this vice? The vice is listed under eClass 21020601 and ETIM EC002173; the SKU is VMV-15 and GTIN 4061905085833. Who is the manufacturer of this vice? The vice is produced by Vertex and supplied under the VMV-15 designation for precision clamping of small parts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-55mm Precision Grinding Vice With Lead Screw, SK2 Body, 47x154x54mm - Vertex
Take advantage of the combination of 0.005 mm precision, a 0–55 mm clamping range, and compact, robust construction for reliable grinding results; order the vice via Metav Werkzeuge or consult the specialists for application advice. VDV-20 Precision Grinding Vice with Threaded Spindle by Vertex — 0.005 mm accuracy, 0–55 mm opening The VDV-20 is a precision grinding vice with a threaded spindle, designed for secure workpiece clamping during surface and profile grinding operations. High precision 0.005 mm accuracy Opening 0–55 mm for versatile clamping Robust SK2 tool steel construction Compact dimensions 47×154×54 mm Reduced rework through measurable precision The vice delivers 0.005 mm accuracy, meaning positional variance is tightly controlled during grinding tasks. This degree of repeatability reduces the need for subsequent adjustments or corrective machining and helps maintain consistent surface quality across batches. The specified tolerance is a measurable technical attribute that supports process planning and quality assurance in precision workshops and toolrooms. Secure clamping with a threaded spindle for steady machining The integrated threaded spindle provides gradual, controllable jaw movement and steady clamping force, which is essential when working on grinding machines where vibration control matters. The 0–55 mm opening covers a broad range of small to medium workpieces, enabling firm fixation without resorting to additional fixturing. The mechanical simplicity of the spindle system also facilitates predictable operation and straightforward maintenance. Compact footprint and durable tool-steel construction for shop floors With compact dimensions of 47×154×54 mm and a weight of 2.5 kg, the vice occupies little bench space while remaining stable under load. Constructed from SK2 tool steel, the device combines hardness and wear resistance appropriate for routine grinding use; the material choice supports service life under abrasive conditions typical of surface finishing. The compact form factor suits crowded benches and minimises the need to rearrange existing setups. Seamless integration into precision workflows and procurement The vice is designed for straightforward integration into existing grinding stations and jigs, providing a consistent clamping solution across repeat jobs. Traceable technical data and a clear SKU simplify procurement and inventory management. For operations seeking dependable components, the measured tolerances and standardised dimensions support both quality control procedures and efficient replacement planning. Contact Metav Werkzeuge in Emmerich for application-specific guidance or to request procurement support via info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s specialists assist with selection and logistics from their European quality filter centre Technical data Article number: VDV-20 GTIN: 4061905084553 Manufacturer: Vertex Eclass: 21020601 ETIM: EC002173 Facts Dimensions: 47×154×54 mm Weight: 2.5 kg Opening: 0–55 mm Accuracy: 0.005 mm Special features Material: SK2 Threaded spindle Precision grinding vice SKU: VDV-20 FAQ What level of positioning accuracy does the vice offer? The VDV-20 precision grinding vice provides an accuracy of 0.005 mm, enabling tight positional control for repeat grinding operations. Which clamping range is covered by the vice? The vice features an opening of 0–55 mm, suitable for a wide range of small to medium-sized workpieces on grinding machines. What material is the vice made from and what does that mean for durability? Constructed from SK2 tool steel, the Vice is designed for wear resistance under abrasive grinding conditions, supporting long service intervals and stable clamping. Is the VDV-20 suitable for bench-top grinding machines? Yes, the compact dimensions and robust build of the VDV-20 make it well suited to bench-top and production grinding stations where space and repeatability are priorities. How is the clamping action achieved on the vice? Clamping is effected via a threaded spindle, providing controlled jaw travel and consistent clamping force appropriate for precision finishing tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-71mm Precision Grinding Vise With Lead Screw, High Precision 0.005mm - Vertex
Take advantage of 0.005 mm repeatability, a 0–71 mm adjustable jaw opening and a robust SK2 tool steel construction for reliable results in fine grinding operations; order the vice directly via Metav Werkzeuge or consult the Metav team for specification advice. VDV-30 Precision grinding vice with threaded spindle by Vertex VDV-30 is a precision grinding vice designed for secure clamping in fine finishing and grinding applications, combining a compact footprint with a threaded spindle for consistent, vibration-resistant workholding 0.005 mm precision for fine grinding 0–71 mm adjustable jaw opening Robust SK2 tool steel construction Threaded spindle for secure clamping High-precision results for finishing operations The vice delivers a verified accuracy of 0.005 mm, enabling repeatable positioning during fine grinding and finishing tasks. Such precision reduces rework and supports tight tolerances when producing optical fits, mould components or precision mechanical parts. The compact design concentrates mass where it matters so the clamping force is steady; this yields improved surface finishes and more predictable cycle times for workshop processes. Stable clamping and material suitability Constructed from SK2 tool steel, the unit offers a hard-wearing contact surface suitable for frequent clamping cycles without excessive wear. The threaded spindle provides controlled, backlash-minimised movement for repeatable jaw travel across the 0–71 mm range, while the vice mass of 5.7 kg contributes to stability on the machine table. For users unfamiliar with SK2, it denotes a high-carbon tool steel commonly used where rigidity and wear resistance are required in clamping tools. Compact form for efficient workshop integration With external dimensions of 72 x 180 x 70 mm, the vice occupies little table space yet provides a robust platform for precision grinding. The compact footprint simplifies fixture planning on surface grinders and toolroom machines, and the measured mass helps damp vibration during finishing passes. For procurement and long-term supply needs, Metav’s quality-filtered logistics ensure steady availability and traceability for production environments. Contact Metav Werkzeuge in Emmerich for detailed technical consultation on the Vertex VDV-30 or to discuss suitability for specific grinding tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VDV-30 GTIN: 4061905085871 Manufacturer: Vertex Dimensions: 72 x 180 x 70 mm Weight: 5.7 kg Material: SK2 Core specifications Accuracy: 0.005 mm Jaw opening: 0–71 mm ETIM: EC002173 eCl@ss: 21020601 Special features Threaded spindle Precision grinding vice design Compact footprint for surface grinders FAQ What tolerance can be expected from the vice in regular use? The vice is specified with an accuracy of 0.005 mm; the Vertex VDV-30 maintains repeatability under normal grinding conditions when properly mounted and used. Which materials can be clamped reliably with this vice? The construction in SK2 tool steel supports secure clamping of typical machined metals and workpieces used in finishing tasks; soft jaws or pads may be used for delicate surfaces. How large is the jaw opening and how does that affect part size? The jaw opening ranges from 0 to 71 mm, allowing the VDV-30 to accommodate a wide span of small to medium components commonly encountered in toolroom and precision grinding. Is the threaded spindle suitable for repeatable positioning? Yes — the threaded spindle delivers controlled travel and reduced backlash, contributing to repeatable positioning and consistent clamping pressure on successive parts. Can the vice be mounted directly to a grinder table? The compact dimensions and mass of the vice make it suitable for direct mounting on many surface grinders and toolroom tables; ensure correct fixturing for optimal stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-74 mm Low-Profile Machine Vice, 47x150x57mm Opening, 0.005mm Accuracy - Vertex
Take advantage of a compact, low-profile clamping solution that pairs a 0–74 mm clamping range with 0.005 mm accuracy for reliable, repeatable setups; order via Metav Werkzeuge or consult our specialists for application advice. VMV-20 low-profile machine vice — 0–74 mm clamping, 0.005 mm precision (Vertex) A VMV-20 low-profile machine vice engineered to secure small workpieces with high repeatability in confined machining and inspection setups. Compact footprint 47×150×57 mm Clamping range 0–74 mm High repeatability with 0.005 mm accuracy Lightweight, robust 2 kg construction Space-saving clamping that improves workflow The low-profile design delivers a compact footprint that reduces interference with spindle travel and peripheral fixtures. With external dimensions of 47×150×57 mm, the vice fits tight machine tables and measuring stations while providing a useful clamping range of 0–74 mm, so smaller components can be gripped without needing larger, more obstructive devices. This compactness shortens set-up time and allows more flexibility in fixture design, supporting efficient sequencing on milling, drilling or inspection operations. Consistent precision for repeatable results Accuracy and repeatability are central to consistent part quality: the vice offers 0.005 mm accuracy, which stabilises reference points during machining and minimises rework caused by positional variance. The controlled clamping action ensures repeatable jaw positions and reliable part datum retention, enabling reproducible toolpaths and predictable inspection outcomes. For process planners and quality engineers, this level of precision reduces adjustment cycles and supports tighter tolerances in serial production. The VMV-20 is purpose-built to keep repeatability within narrow limits for precise workflows. Integrates easily into production and inspection workflows A compact, sturdy construction at 2 kg provides stability without excessive mass, easing handling and rotation of fixtures between stations. The low-profile geometry prevents collision with tall tool holders and simplifies access for probes and cutters, improving machining safety and cycle reliability. Built for clamping small parts, the vice adapts to a variety of fixtures and can be incorporated into jigs or dedicated inspection rigs, supporting a smoother handover between manufacturing and metrology processes. Supplied by Vertex, the device complements a workshop’s toolkit where space, accuracy and repeatability matter. Contact Metav Werkzeuge for tailored advice on how the Vertex VMV-20 low-profile machine vice can be integrated into current setups; request detailed drawings or delivery from our Emmerich quality hub via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMV-20 GTIN: 4061905086731 Brand: Vertex eClass: 21020601 ETIM: EC002173 Facts Dimensions: 47×150×57 mm Opening range: 0–74 mm Accuracy: 0.005 mm Weight: 2 kg Special features Low-profile design Compact footprint for tight setups High repeatability for precision tasks Robust construction for stable clamping FAQ What is the clamping range of the vice? The VMV-20 low-profile machine vice offers a clamping range of 0–74 mm. What level of accuracy does the vice provide? The vice delivers an accuracy of 0.005 mm, suitable for repeatable precision work. What are the external dimensions and how does that help? External dimensions are 47×150×57 mm, giving a compact footprint that reduces interference on machine tables. Is the vice suitable for integration into inspection fixtures? Yes; the low-profile design and precise clamping make the VMV-20 well suited to inspection and metrology fixtures. What is the weight and construction like? The VMV-20 weighs 2 kg and features a robust build for stable, vibration-resistant clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-75mm Precision Grinding Vise With Threaded Lead Screw, 0.005mm Accuracy - Vertex
Take advantage of precise clamping, robust SK2 construction and a finely threaded lead screw for reliable grinding results; order directly through Metav Werkzeuge or consult our specialists for application advice. VDV-25 Precision grinding vice — 0–75 mm opening, SK2 steel, lead screw The VDV-25 is a compact precision grinding vice designed for workshop and toolroom use, delivering stable clamping and repeatable positioning for finish-critical operations. Compact dimensions for bench or machine mounting High repeatability with 0.005 mm accuracy SK2 forged steel body for vibration damping Fine-thread lead screw for controlled clamping Consistent accuracy for finish-critical components The vice offers a measured accuracy of 0.005 mm, which supports repeatable part runs and reduces the need for rework. Thanks to the 0–75 mm jaw opening, the unit covers a broad range of small to mid-sized components commonly encountered in toolrooms and precision shops. The defined tolerance figure is useful when planning process capability: it allows integration into quality control routines and provides a transparent basis for fixture design. The combination of compact form and verified precision helps ensure consistent surface finishes when used on grinding or light machining equipment. Robust SK2 construction reduces vibration and improves surface finish Manufactured from SK2 tool steel, the vice body offers a balance of rigidity and damping that contributes to stable clamping during abrasive operations. With a mass of 3.9 kg, the assembly resists movement under cutting or dressing forces, which in turn reduces chatter and enhances final geometry. The lead screw spindle provides progressive engagement and fine control over clamping force; this mechanical advantage minimises the risk of part distortion while delivering secure hold-down for thin or delicate workpieces. The result is a measurable improvement in cycle consistency and surface integrity. Compact layout and easy alignment for repeatable setups The vice's dimensions (62 × 175 × 60 mm) make it straightforward to position on machine tables or inspection benches without occupying excessive space. A clearly defined jaw travel and the fine-thread spindle enable accurate incremental adjustments, simplifying alignment with datum faces or centrelines. For workshops seeking to streamline fixturing, the unit's predictable behaviour shortens setup time and supports lean production practices. Technical simplicity also means lower maintenance requirements and straightforward integration into standard clamping nests. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VDV-25 precision grinding vice into specific processes and to arrange prompt supply from local stock. Technical Data Article number: VDV-25 GTIN: 4061905085864 Manufacturer: Vertex Facts Dimensions: 62 × 175 × 60 mm Weight: 3.9 kg Accuracy: 0.005 mm Opening: 0–75 mm Material: SK2 Special features Lead screw spindle for precise clamping Designed for precision grinding applications ECLASS: 21020601 ETIM: EC002173 FAQ What is the maximum jaw opening of the vice? The vice provides a jaw opening of 0–75 mm, suitable for a wide range of small to medium parts. What material is used for the vice body and why is it important? The body is made from SK2 tool steel; this material offers rigidity and damping that help reduce vibration and improve surface finish during grinding. How precise is the VDV-25 in clamping repeatability? The VDV-25 achieves a verified accuracy of 0.005 mm, supporting repeatable setups and consistent part quality. Is the spindle a fine-thread lead screw and what benefit does that bring? Yes, the vice uses a lead screw spindle which allows controlled clamping force and fine positional adjustment to protect delicate components. Can the vice be integrated directly into a machine table or fixturing system? The compact dimensions and predictable clamping behaviour make the vice suitable for mounting on machine tables and within modular fixturing systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-80 mm Low-Profile Machine Vice, Quick-Action Low-Draw Design, 48x155x93.5mm - Vertex
Take advantage of the low-profile design and 0–80 mm opening to secure components in confined workspaces while keeping the bench area organised; the compact footprint and manageable weight ensure stable clamping and straightforward handling. Order the vice directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Vertex SVB-20 Low-Profile Vice — 0–80 mm opening, compact footprint A SVB-20 low-profile vice engineered for secure clamping of small to medium components where headroom is limited, suitable for precision workshop and general bench duties. Low-profile design for limited headroom Opening range 0–80 mm Compact 48 × 155 × 93.5 mm footprint Stable mass 4.4 kg for firm clamping Space-saving design that increases usable bench area The low-profile design reduces vertical obstruction around the workpiece, allowing operations under limited headroom without compromising access from above. With external dimensions of 48 × 155 × 93.5 mm, the unit occupies minimal bench space while providing sufficient jaw travel for many routine assembly and machining tasks. The compact format makes it straightforward to position multiple clamping points along a workbench, supporting efficient component handling and minimising set-up time in tight production cells. Versatile clamping range for diverse workshop tasks A jaw opening of 0–80 mm provides a practical clamping range for gripping small parts, fixtures and workpieces used in light machining, soldering or inspection tasks. The stated opening indicates the maximum clear gap between the jaws; for everyday applications this offers flexibility to hold a variety of cross-sections and shapes without frequent tool swaps. For teams working on small-series production or repeat maintenance, the measurable opening supports quick selection of the correct vice for each job, reducing downtime and supporting consistent results. Weight that balances portability with stability At 4.4 kg, the tool offers a compromise between ease of repositioning and the mass needed to resist movement under light to moderate clamping loads. The weight contributes to a steady clamping platform when mounted or secured to a bench, while remaining light enough for reorganisation of the workshop layout when workflows change. This balance is particularly useful in training environments or service areas where fixtures are moved frequently yet reliable clamping is still required. Practical integration into professional workflows Designed for straightforward inclusion in workshop setups, the vice pairs well with common bench arrangements and modular fixture systems thanks to its small footprint and measurable specifications. Clear dimensional data and the defined 0–80 mm opening make it simple to plan jigs and fixtures around the clamping envelope. For buyers seeking predictable performance and easy procurement, the documented measures and SKU support streamlined stock management and compatibility checks within production tool lists. Contact Metav Werkzeuge in Emmerich for specialist advice on the SVB-20 low-profile vice and precise delivery options from our European quality hub Technical data Article number: SVB-20 GTIN: 4061905084539 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Dimensions: 48 × 155 × 93.5 mm Jaw opening: 0–80 mm Weight: 4.4 kg EClass: 21020601 ETIM: EC002173 Special features Category: Vertex SKU: SVB-20 Compact bench vice type Designed for limited headroom applications FAQ What is the maximum jaw opening of the vice? The maximum jaw opening is 0–80 mm, which defines the clear gap available to grip workpieces with the SVB-20 low-profile vice. How large is the vice and how much bench space does it need? External dimensions are 48 × 155 × 93.5 mm, giving a compact footprint that is suitable for dense bench layouts and multiple clamping stations. Is the weight suitable for stable clamping on a workbench? With a mass of 4.4 kg, the vice provides a balance between portability and stability for routine bench clamping tasks. Which applications is this vice suited to in a professional workshop? The SVB-20 is intended for general bench clamping of small to medium components where limited headroom and precise positioning are priorities Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-89mm Low-Profile Machine Vice Precision Jaw Opening 62x170x62mm, 0.005mm Accuracy - Vertex
The combination of a compact low-profile design, precise 0.005 mm positional accuracy and a wide 0–89 mm jaw opening supports stable, repeatable clamping for small-series machining. Order the VMV-25 low-profile vice directly via Metav Werkzeuge or ask the consultants for specific application advice. VMV-25 Low-profile machine vice by Vertex — 0–89 mm jaw opening, 0.005 mm accuracy VMV-25 Low-profile machine vice is a compact clamping solution for machine tables, developed for precise milling and drilling tasks in constrained setups. Compact low-profile design for machine tables Jaw opening 0–89 mm for diverse workpieces Positional precision 0.005 mm for fine tolerances Robust 3.3 kg construction for steady clamping Precision clamping that reduces rework and inspection time The vice offers positional accuracy of 0.005 mm, a level of precision that supports tight tolerance work and reduces the need for lengthy re-inspection. High repeatability is beneficial when producing short production runs or setting up jigs where consistent part orientation is critical. The specified accuracy ensures that workpieces remain within machining tolerances without frequent readjustment, which translates into higher throughput and fewer scrap parts. Technical operators and quality engineers can therefore rely on reproducible results from setup to setup. Space-saving layout for versatile machine applications Designed with a low-profile silhouette and compact external dimensions (62 x 170 x 62 mm), the clamping tool integrates into machines where table clearance is limited. The jaw opening 0–89 mm covers a broad range of part sizes while keeping the overall footprint small. This combination of compactness and reach reduces interference with milling heads and allows closer placement of fixtures, supporting more efficient use of the machine table. The modest mass (3.3 kg) contributes to stability during cutting, helping to dampen vibration and maintain cut quality on small and medium machining centres. Built for repeatability and straightforward workshop integration Constructed to provide steady clamping force and consistent alignment, the vice supports frequent changeovers and short-run production without excessive maintenance. The weight and geometry deliver stable clamping that minimises micro-movement under load, which helps maintain surface finish and dimensional integrity. For workshop managers, the vice represents an investment in reliability: fewer interruptions for adjustment, predictable setup times and lower overall process variability. Advice and application guidance are available from Metav Werkzeuge for integration into existing toolholding and fixturing strategies. Select Vertex's VMV-25 for dependable, space-efficient clamping — contact Metav Werkzeuge in Emmerich for tailored application advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VMV-25 GTIN: 4061905087660 Manufacturer: Vertex ECLASS: 21020601 ETIM: EC002173 Facts Jaw opening: 0–89 mm Accuracy: 0.005 mm Weight: 3.3 kg Dimensions: 62 x 170 x 62 mm Special features Low-profile vice for machine tables Suitable for milling and drilling setups Robust construction for steady clamping FAQ What size of workpieces can be clamped with this vice? The VMV-25 offers a jaw opening of 0–89 mm, allowing clamping of a wide range of small to medium workpieces within that span. How precise is the alignment when clamping repeat parts? Positional accuracy is specified as 0.005 mm for the vice, supporting repeatable alignment across multiple setups. Can the vice be used on compact machining centres with limited head clearance? Yes, the low-profile design and overall dimensions (62 x 170 x 62 mm) make the vice suitable for installations where vertical and lateral clearance are restricted. Is the vice heavy enough to provide stable clamping during milling? With a mass of 3.3 kg, the vice provides a stable platform that helps reduce vibration and movement during typical milling operations. Who manufactures the product and where can more information be obtained? The vice is manufactured by Vertex; further product information and purchasing guidance can be obtained via Metav Werkzeuge. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-90mm Low-Profile Bench Vise Parallel Jaws, 6.9kg - Vertex
Take advantage of a compact, steady clamping solution with a wide 0–90 mm jaw opening and a compact footprint that fits tight workspaces; order the unit directly via Metav Werkzeuge or consult our advisors for application-specific guidance. SVB-30 Low-profile Bench Vice by Vertex — 0–90 mm jaw opening, 6.9 kg mass A practical low-profile vice, the SVB-30, designed for reliable clamping in constrained workshop and maintenance settings Compact 73×180×103.8 mm footprint Jaw opening 0–90 mm Stable 6.9 kg mass for steady clamping Engineered for steady clamping in tight spaces The SVB-30 is a low-profile bench vice engineered to deliver reliable clamping where space is limited. Its modest external dimensions and compact footprint allow the unit to be mounted on crowded benches or mobile trolleys without obstructing access to the workpiece. The 0–90 mm jaw opening covers a broad range of common clamping tasks, from small fabrication jobs to light assembly work, while the unit’s mass contributes to stable holding during cutting, filing or inspection. This combination reduces repositioning time and helps keep production steps efficient. Design that improves workflow and accessibility Low-profile construction reduces interference above the jaws and provides better tool access at shallow angles, which benefits finishing and precision tasks. The simple geometry of the vice supports quick alignment of parts and unobstructed use of hand tools around the clamped piece. By emphasising straightforward functionality rather than complex extra features, the design supports dependable, repeatable results and a predictable workflow—qualities that matter in both small-scale shops and maintenance departments. Clear technical baseline for specification and procurement Technical identifiers such as the SKU and GTIN simplify ordering and inventory control, and the unit’s measured values give a verifiable basis for fitting and planning. The compact dimensions (73×180×103.8 mm) and 6.9 kg weight are useful when assessing bench load and mounting options. Classification codes (ETIM and eCl@ss) assist procurement teams in systems that require standardised product identification. These objective data points enable straightforward comparison with alternative items and support rational purchasing decisions. Contact Metav Werkzeuge for delivery and application advice on the Vertex SVB-30 low-profile bench vice from our Emmerich warehouse Technical data Article number: SVB-30 GTIN: 4061905086540 Manufacturer: Vertex Facts Dimensions: 73×180×103.8 mm Weight: 6.9 kg Jaw opening: 0–90 mm eCl@ss: 21020601 ETIM: EC002173 Special features Low-profile bench vice design Compact footprint for tight workspaces Stable mass for reduced vibration Image file: svb-20-main.jpg UID: SVB-30 FAQ What range of clamping does the SVB-30 cover? The SVB-30 offers a jaw opening from 0–90 mm, suitable for a wide range of small to medium clamping tasks. Is the unit suitable for tight bench spaces? Yes, the low-profile design and compact dimensions (73×180×103.8 mm) make it well suited to confined benches and mobile workstations. How does the vice support accurate workholding? The unit’s stable mass (6.9 kg) and straightforward jaw geometry provide consistent holding force and reduced movement during manual operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-90mm Low-Profile Machine Vice, 63x175x102.5mm Opening, 6kg - Vertex
Compact, low-profile clamping combined with a wide 0–90 mm opening and a stable 6 kg mass makes this vice an efficient choice for constrained setups. Order the SVB-25 directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertex SVB-25 low-profile milling vice — 0–90 mm opening, compact footprint The SVB-25 is a low-profile milling vice engineered for reliable workpiece clamping in limited-space machine setups, offering a combination of compact dimensions and robust hold for precision operations. Compact footprint 63 x 175 x 102.5 mm Wide 0–90 mm clamping range Stable 6 kg mass for vibration resistance Low-profile design for tight set-ups Space-saving design for precise production The low-profile construction offers a compact footprint of 63 x 175 x 102.5 mm, enabling integration on crowded machine tables and fixtures without sacrificing accessibility. This geometry reduces interference with tool paths and accessories, which supports uninterrupted machining cycles and increases usable spindle clearance. By combining small external dimensions with a substantial clamping span, the vice helps maintain workflow efficiency in milling and machining centres where vertical space is limited. Consistent clamping for repeatable accuracy A 0–90 mm opening delivers a practical working range for small to medium workpieces, supporting repeatable set-ups and straightforward part loading. The vice’s 6 kg mass contributes to stability and dampens vibration, which is beneficial when machining with tight tolerances; stable clamping reduces micro-movement and improves surface finish. The mechanical simplicity of the design focuses on reliable force transmission, so clamping behaviour remains predictable across repeated cycles — a key factor for batch production and quality control. Workshop integration and supplier confidence Designed as a purpose-built clamping solution, this low-profile vice fits standard machine tables and fixture layouts without the need for extensive adaptation. The combination of compactness and a versatile opening range reduces the number of different vices required in a workshop, simplifying logistics and setup. Metav’s role as a precision partner adds practical value: established supply processes from Emmerich, a broad product range and a long-standing customer base support dependable procurement and ongoing availability for production environments. Contact Metav Werkzeuge in Emmerich for tailored application advice on the Vertex SVB-25 low-profile milling vice or to request technical drawings and compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SVB-25 GTIN: 4061905085420 Manufacturer: Vertex Core technical data Dimensions: 63 x 175 x 102.5 mm Weight: 6 kg Opening range: 0–90 mm Special features Product type: low-profile milling vice EClass: 21020601 ETIM: EC002173 FAQ What clamping range does the vice offer? The clamping range is 0–90 mm, suitable for small to medium workpieces when using the SVB-25 low-profile milling vice. Is the SVB-25 suitable for use on milling machine tables? Yes, the Vertex SVB-25 is designed for fixture and table mounting on milling machines, with a compact form that minimises interference with tool paths. What are the external dimensions of the vice? External dimensions are 63 x 175 x 102.5 mm, which enables installation in constrained setups while preserving access to the clamped part. How much does the vice weigh and why does that matter? The vice weighs 6 kg; this mass enhances stability during cutting operations and helps damp vibration for improved machining consistency. Who manufactures the SVB-25 and what is the SKU? The vice is manufactured by Vertex and sold under the SKU SVB-25 (GTIN: 4061905085420). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-99 mm Low-Profile Machine Vice, 72x190x66mm, 0.005mm Accuracy - Vertex
Reliable clamping in confined machining spaces comes from the combination of a low‑profile design, a wide 0–99 mm opening and 0.005 mm repeatability; these properties support stable operation and consistent part tolerances. Order the VMV‑30 via Metav Werkzeuge or request targeted technical advice from our consultants. VMV-30 Low-profile machine vice by Vertex — 0–99 mm opening, 0.005 mm accuracy The VMV-30 is a compact low‑profile machine vice engineered for secure, high‑precision clamping on small milling and CNC machines where clearance is limited. Low-profile design for tight setups Wide 0–99 mm clamping range High repeatability to 0.005 mm Stable 4.5 kg construction Secure clamping where space is limited The vice’s low‑profile silhouette and compact footprint reduce interference with tool paths and fixtures, making it well suited for confined setups. With a nominal dimension of 72 x 190 x 66 mm, the component occupies little vertical space while still providing a broad clamping range. This layout shortens machine set-up time and minimises the need for supplementary fixturing, benefiting batch processes where fixture changeover and spindle clearance are critical. Consistent tolerances for reliable production Manufactured to an accuracy of 0.005 mm, the vice delivers measurable repeatability that supports tight tolerance work and reduces scrap rates. Such precision permits predictable positioning across repeated operations, enabling downstream processes — for example drilling or finishing passes — to proceed without frequent readjustment. The result is improved throughput and fewer inspection interventions, which is particularly valuable for small‑batch production and precision components. Stability and ergonomic handling for everyday workshop use With a mass of 4.5 kg and a balanced layout, the vice offers intrinsic stability during machining, reducing micro‑movement that can degrade surface finish. The wide 0–99 mm opening covers a variety of stock sizes while keeping handling straightforward; operators benefit from a compact, manageable clamping tool that fits many standard machine tables. The vice’s compact weight also simplifies transport between workstations and storage on crowded benches. Supply compatibility and procurement clarity Designed and supplied by Vertex, the vice carries clear identifiers to simplify ordering and inventory management: SKU VMV-30 and GTIN 4061905088025. Classification codes such as ECLASS 21020601 and ETIM EC002173 support digital procurement and ERP integration, reducing administrative friction. Sourcing through an experienced distributor ensures consistent quality control and fast replacement when needed, supporting uninterrupted production. Contact Metav Werkzeuge in Emmerich for tailored technical advice, procurement assistance and detailed drawings — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Article number: VMV-30 GTIN: 4061905088025 ECLASS: 21020601 ETIM: EC002173 Facts Dimensions: 72 x 190 x 66 mm Weight: 4.5 kg Opening range: 0–99 mm Accuracy: 0.005 mm Special features Product type: Low-profile machine vice Brand: Vertex Model: VMV-30 Intended application: clamping in confined machining spaces FAQ What clamping range does the vice offer? The vice provides a clamping range of 0–99 mm, suitable for a wide span of workpiece sizes while maintaining a compact envelope. How precise is the vice for repeatable machining? With an accuracy of 0.005 mm, the VMV‑30 from Vertex is suited to tasks that require consistent positioning and tight tolerances. Is the vice heavy enough to remain stable during machining? At 4.5 kg, the vice offers a stable mass for many small to medium machining operations without imposing excessive weight for handling or mounting. Which identifiers should be used for procurement and inventory? Use SKU VMV-30, GTIN 4061905088025, ECLASS 21020601 and ETIM EC002173 for clear ordering and ERP entry. Which machines is this vice best suited for? The low vertical profile and compact footprint make it ideal for small milling machines, compact CNC machines and setups where spindle clearance is restricted. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10x330mm Air Belt Sander Rapid Speed, 16,000 rpm - Vertex
Take advantage of a lightweight, high‑speed air tool that keeps production moving: the compact design and 10×330 mm belt deliver rapid stock removal while the 16,000 r.p.m. spindle speed shortens cycle times. Order the tool directly via Metav Werkzeuge or ask our consultants for application advice. VAG-310 — Pneumatic belt sander by Vertex, 10×330 mm belt, 16,000 r.p.m. VAG-310 is a compact air‑powered belt sander designed for fast surface preparation on both curved and flat components, suitable for workshop and industrial environments Compact pneumatic belt sander, 10x330 mm belt High speed 16,000 r.p.m. for fast material removal Lightweight construction approx. 0.8 kg Ideal for curved and flat surface sanding Accelerated material removal for efficient workflow The air‑powered design delivers a consistent power-to-weight ratio that improves throughput without adding operator fatigue. With a 16,000 r.p.m. operating speed and a 10×330 mm belt, the tool achieves a high material removal rate on common substrates while maintaining surface quality. This performance reduces time spent on roughing and significantly shortens preparation phases in assembly or repair tasks. The combination of speed and belt format makes it well suited to tasks where both reach and consistent abrasion are required. Precise handling for shaped and flat surfaces An ergonomic layout and low mass ensure the sander tracks naturally along contours, supporting repeatable results on complex profiles. At roughly 0.8 kg, the unit is easy to manoeuvre for extended periods, enabling steady control during finishing passes. The configuration favours operators who need to work on radii, edges and planar areas without swapping multiple tools, helping to streamline process steps and reduce setup complexity. Robust design and straightforward maintenance Built for workshop use, the construction focuses on reliable operation under continuous conditions. The air‑driven motor avoids electrical hazards in sensitive production areas and simplifies maintenance routines. Routine checks and standard belt changes keep the tool in service with minimal downtime. Designed with durability in mind, the sander supports consistent performance across job cycles, contributing to a dependable production flow and lower total operating effort. Choose the Vertex VAG-310 for fast, precise sanding and contact Metav Werkzeuge in Emmerich for tailored advice or order assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VAG-310 GTIN: 4061905083099 Designation: Pneumatic belt sander Facts Belt size: 10×330 mm Speed: 16,000 r.p.m. Weight: 0.8 kg Special features Suitable for sanding curved and flat surfaces Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/5b/31/97/63/6397315be7a68eb025b2a0f1/vag-310-main.jpg FAQ What belt size does this sander use? The VAG-310 accepts a 10×330 mm sanding belt for general surface preparation. What operating speed is specified? The unit runs at 16,000 r.p.m., delivering rapid abrasive action. Is the tool suitable for curved surfaces? Yes, the VAG-310 is designed specifically for sanding both curved and flat surfaces. How heavy is the tool? The sander weighs approximately 0.8 kg, making it easy to handle for extended tasks. What power source does the sander require? This is a pneumatic, air‑powered belt sander; compressed air supply is required for operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Air Straight Grinder High Speed 70,000 r.p.m., 3 mm Collet - Vertex
Benefit from the combination of 70,000 r.p.m. high-speed performance, a compact 150 mm length and strong yet quiet operation to accelerate finishing tasks and reduce cycle times; order the VAG-701 directly via Metav Werkzeuge or contact our consultants for tailored advice VAG-701 Pneumatic Straight Grinder — strong and quiet, 70,000 r.p.m. The VAG-701 Pneumatic Straight Grinder is a compact air-powered tool designed for high-speed finishing and deburring in workshop and light industrial environments High-speed 70,000 r.p.m. for rapid material removal Compact 150 mm length for tight access Lightweight 0.62 kg reduces operator fatigue 3 mm collet compatible with small shank burrs and cutters Faster finishing through measurable high-speed performance The principal advantage of this air straight grinder is its high rotational speed, rated at 70,000 r.p.m., which translates directly into faster material removal and shorter cycle times for finishing and deburring tasks. High speed increases effective cutting engagement with fine abrasives and small rotary burrs, enabling consistent results on small radii and narrow seams. Measurable performance like this supports predictable throughput planning and makes the tool a rational choice where efficiency and repeatability are priorities. Compact, ergonomic build to lower fatigue and improve access With a length of 150 mm and a mass of 0.62 kg, the tool is optimised for access to confined areas and extended use. The reduced bulk allows operators to work in narrow fixtures and inside assemblies without awkward repositioning, while the low weight lessens muscle strain during repeated operations. Combined with the model’s “strong and quiet” character, the design supports a calmer workshop environment and helps maintain productivity over longer shifts. Versatile compatibility for precise finishing tasks Equipped with a 3 mm collet, this grinder accepts a wide range of small shank rotary burs, mounted cutters and miniature abrasive points commonly used for precision deburring, chamfering and surface blending. The collet size makes integration with existing miniature tool sets straightforward and limits the need for special adapters. The tool’s configuration therefore provides practical versatility for jobshops and maintenance departments handling detailed finishing or repair work. Built for reliable day-to-day workshop use Engineered for steady performance under frequent use, the grinder combines high speed and compactness without excessive vibration. Its balanced specification supports reliable operation in repetitive workflows and contributes to consistent finish quality. Backed by the Vertex name, the unit aligns with expectations for industrial-grade handheld air tools and suits teams seeking a durable, easy-to-handle solution for precision surface work Contact Metav Werkzeuge for advice on integrating the Vertex VAG-701 into the workshop and to arrange supply from our Emmerich warehouse — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: VAG-701 GTIN: 4061905087080 ECLASS: 21060101 Category: Vertex Core figures Rotation speed: 70,000 r.p.m. Length: 150 mm Collet diameter: 3 mm Weight: 0.62 kg Special features Type description: Strong and quiet Tool category: Pneumatic straight grinder Suitable for: Precision finishing and deburring applications FAQ What rotational speed does this grinder achieve? The VAG-701 operates at a rated speed of 70,000 r.p.m., enabling rapid material removal with fine rotary burrs. Which shank diameter accessories fit the collet? The tool uses a 3 mm collet and accepts 3 mm shank rotary burrs, mounted points and similar small accessories. Is the grinder suitable for work in confined spaces? Its compact 150 mm length and lightweight 0.62 kg construction make the VAG-701 well suited to restricted access and intricate finishing tasks. How does the tool balance power and noise? Designed as “strong and quiet”, the grinder delivers high-speed performance while maintaining reduced operational noise compared with larger air tools in its class. Which tasks is this model primarily intended for? The VAG-701 is intended for precision deburring, chamfering and fine finishing where access is limited and consistent surface quality is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20x520mm Air Belt Sander For Curved And Flat Surfaces 16,000 rpm, 1.1 kg - Vertex
Take advantage of the combination of high rotational speed, a narrow 20 x 520 mm sanding belt and a lightweight 1.1 kg body for fast, precise surface finishing — order the VAG-320 directly via Metav Werkzeuge or ask our consultants if needed VAG-320 – Vertex pneumatic belt sander with 20 x 520 mm belt and 16,000 r.p.m. The VAG-320 is a compact pneumatic belt sander designed for controlled material removal on both curved and flat components in workshop and production environments 20 x 520 mm belt for narrow surfaces 16,000 r.p.m. for fast material removal Lightweight 1.1 kg body for easy handling Suitable for curved and flat surfaces Fast, consistent finishing for precision parts The pneumatic drive delivers a steady performance that supports repeatable surface results, while the narrow 20 x 520 mm belt enables focused abrasion in confined areas. At 16,000 r.p.m., the tool provides efficient stock removal without excessive vibration, which helps to maintain precision on profiles and edges. This combination reduces rework and supports a smoother workflow when preparing components for subsequent processes such as bonding, painting or fitting. Ergonomic design that eases operator workload With an overall length of 360 mm and a weight of just 1.1 kg, the sanding tool is designed for prolonged use with reduced operator fatigue. The slim form factor improves access to tight spaces and long reaches, while the compact mass makes handling more controlled during fine finishing operations. Ergonomic benefits translate directly into higher throughput and fewer process interruptions in busy workshops. Adaptable for curved and flat surfaces The belt geometry and compact head suit both curved and flat surfaces, permitting uniform contact and consistent finishing across diverse geometries. For components with complex contours, the narrow belt follows the profile more easily than wide abrasives, helping to preserve dimensional tolerances while delivering the required surface texture. The tool is therefore well suited to tasks ranging from edge blending to contour refinement. Integration into workshop systems and everyday use As an air-powered tool, the sander integrates readily into standard compressed air setups typical in industrial and artisan workshops. The simple pneumatic concept supports robust operation with straightforward maintenance routines, keeping downtime to a minimum. Combined with the unit’s compact dimensions and focused sanding capability, this makes the tool a practical choice for production lines and repair benches where reliable finishing is essential. For workshops seeking a compact, high-speed pneumatic belt sander, contact Metav Werkzeuge — our specialists at the Emmerich quality centre will advise on suitability and delivery Technical data SKU: VAG-320 GTIN: 4061905085536 eClass: 21060102 Speed: 16,000 r.p.m. Belt size: 20 x 520 mm Weight: 1.1 kg Length: 360 mm Facts Compact length 360 mm Low weight 1.1 kg High speed 16,000 r.p.m. Narrow belt 20 x 520 mm Special features Pneumatic drive Suitable for sanding curved and flat surfaces Compact, ergonomic design FAQ What applications is this belt sander suitable for? The VAG-320 pneumatic belt sander from Vertex is intended for finish sanding and material removal on both curved and flat components, suitable for contour work and edge finishing. What belt dimensions does the tool use? The tool accepts a 20 x 520 mm belt, which is ideal for narrow and detailed sanding tasks. What rotational speed does the sander provide? The VAG-320 operates at 16,000 r.p.m., enabling efficient and consistent material removal. Is the sander easy to handle during long tasks? Yes — at 1.1 kg and 360 mm length the tool is lightweight and compact, supporting extended operation with reduced operator fatigue. What are the product identifiers for ordering or stock control? SKU: VAG-320; GTIN: 4061905085536 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3 mm/6 mm Air Straight Grinder Double Collet, 35,000 rpm, 175 mm Length - Vertex
Compact, high-speed finishing with a double collet (3 mm and 6 mm) and a 35,000 rpm pneumatic drive delivers consistent performance in confined spaces; order the tool directly via Metav Werkzeuge or ask our consultants if needed. VAG-609 Pneumatic Straight Grinder – double collet 3 mm / 6 mm, 35,000 rpm (Vertex) A VAG-609 pneumatic straight grinder designed for precise finishing and deburring in professional workshops. Double collet: 3 mm and 6 mm High speed: 35,000 rpm operation Lightweight design at 0.53 kg Compact length: 175 mm for reach Faster finishing with industrial consistency The straight grinder offers a measurable productivity advantage thanks to its 35,000 rpm pneumatic motor, which keeps cutting and finishing tools operating at stable speeds under load. The double collet system for 3 mm and 6 mm shanks reduces tool change time and broadens accessory compatibility, enabling quicker switching between grinding, deburring and light polishing tasks. The pneumatic drive ensures continuous torque for repetitive operations, supporting steady cycle times on production benches. Less fatigue, better access for complex components At just 0.53 kg and with a 175 mm overall length, the unit is balanced for extended use and access into narrow cavities. Reduced mass lowers operator strain during repetitive tasks, while the slim profile improves visibility of the working point and control of fine movements. These ergonomic advantages translate into fewer stoppages for breaks and a more predictable quality of finish on delicate parts. Workshop versatility with reliable supply options The tool is configured as a straight pneumatic grinder suitable for a range of finishing roles in general workshop environments, from fine deburring to edge chamfering. The pneumatic operation and common shank sizes make it compatible with standard rotary accessories. Supplied under the Vertex name, the design focuses on straightforward integration into workshop workflows and dependable availability via Metav Werkzeuge, which supports procurement and supply continuity for industrial users. For high-speed workshop finishing with Vertex reliability, contact Metav Werkzeuge in Emmerich for tailored advice and procurement information Technical data SKU: VAG-609 GTIN: 4061905085819 Manufacturer: Vertex Core specifications Speed: 35,000 rpm Collet sizes: 3 mm, 6 mm Weight: 0.53 kg Length: 175 mm Features Pneumatic straight grinder Double collet for 3 mm and 6 mm shanks High-speed operation for finishing Compact, balanced housing FAQ What collet sizes does this tool accept? The VAG-609 accepts 3 mm and 6 mm shanks via its double collet arrangement, enabling the use of common rotary tool accessories. Is the grinder suitable for precise deburring work? Yes. With a 35,000 rpm pneumatic drive and a compact housing, the VAG-609 provides the speed and control needed for fine deburring and careful edge finishing. How heavy is the unit and how does that affect handling? The tool weighs 0.53 kg, which helps reduce operator fatigue during prolonged use and improves manoeuvrability in confined areas. What power source is required for operation? The device is pneumatically driven and requires a compressed air supply appropriate for pneumatic straight grinders; standard workshop air systems are typically used. Can it accommodate standard grinding and polishing accessories? Compatibility with 3 mm and 6 mm shank accessories makes the VAG-609 suitable for a broad range of grinding, deburring and light polishing attachments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45° Pneumatic Angle Grinder 30mm Arbor 23,000 rpm, 160mm Length - Vertex
Compact 45° head and high rotational speed combine to deliver fast, precise material removal in restricted areas, while the lightweight 0.3 kg construction reduces operator fatigue. Order the unit directly via Metav Werkzeuge or consult our specialists for application-specific advice. VAG-8241 Pneumatic Angle Grinder — 45° head, 23,000 rpm (Vertex) The VAG-8241 is a compact pneumatic angle grinder with a 45° head designed for precision work in confined workshop spaces Compact 45° head for tight access High-speed rotation at 23,000 rpm Small 30 mm wheel for precision work Lightweight 0.3 kg for reduced fatigue Precision performance in confined spaces The combination of a 45° head and a small 30 mm wheel diameter makes this air-powered tool particularly well suited to jobs where access is limited and accuracy matters. High rotational speed at 23,000 rpm enables efficient cutting back of material and rapid surface refinement, while the compact overall length of 160 mm allows entry into narrow assemblies. Operators benefit from reduced effort thanks to the 0.3 kg mass, which lowers fatigue during repetitive finishing tasks and improves consistency in manual operations. Stable pneumatic power for continuous operation A pneumatic drive provides a favourable power-to-weight ratio and steady performance under load. The design reduces the need for electrical components in the tool head, which simplifies maintenance and keeps downtime low in a production environment. Consistent speed under varying load conditions supports repeatable results during grinding and light material removal, making this grinder a practical choice for frequent workshop use and inline finishing processes. Simple handling, fast integration into workflows Ergonomics and compact geometry enable comfortable one-handed use and faster cycle times on assembly or repair tasks. The grinder’s configuration supports close-up work on assemblies where a larger tool would be impractical, helping to improve throughput without sacrificing control. For procurement and workshop managers the unit offers an easy fit into existing compressed-air tool fleets; Metav Werkzeuge supplies the product from its European stock and can advise on selection and logistics to ensure rapid availability. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VAG-8241 into production or maintenance operations from our Emmerich stock Technical Data Article number: VAG-8241 GTIN: 4061905084126 Brand: Vertex Core technical data Speed: 23,000 rpm Wheel / disc diameter: 30 mm Weight: 0.3 kg Overall length: 160 mm Head angle: 45° Special features Pneumatic / air-powered operation Compact 45° head for tight access Designed for precision grinding and finishing Lightweight design for reduced operator fatigue FAQ What is the primary use of this tool? The VAG-8241 pneumatic angle grinder is intended for precision grinding and finishing in confined areas where access and control are critical. What disc size does the grinder accept? The tool is specified for a 30 mm wheel or disc diameter, suitable for detailed surface work. What rotational speed does the unit achieve? The grinder runs at up to 23,000 rpm, providing high-speed material removal for efficient finishing. How heavy is the grinder? The Vertex VAG-8241 weighs approximately 0.3 kg, which helps reduce operator fatigue during repetitive tasks. Is this tool suitable for workshop integration? The compact format and pneumatic drive of the VAG-8241 allow straightforward integration into existing compressed-air tool fleets and production workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6 mm Air Straight Grinder 22,000 rpm, Lightweight 0.6 kg - Vertex
Take advantage of the combination of high rotational speed, compact design, and lightweight handling for faster job cycles and reduced operator fatigue. Order the tool directly via Metav Werkzeuge or consult our specialists for tailored advice and availability. Vertex VAG-604 Pneumatic straight grinder — 22,000 r.p.m., lightweight 0.6 kg The Vertex VAG-604 pneumatic straight grinder is a compact, high-speed tool designed for precision surface finishing and deburring tasks in busy workshops and production cells High speed: 22,000 r.p.m. for efficient grinding Lightweight design at 0.6 kg for reduced operator fatigue Compact length 175 mm fits tight workspaces Faster finishing through high-speed pneumatic drive The pneumatic drive coupled with a top rotational speed of 22,000 r.p.m. delivers consistent material removal rates that shorten cycle times and increase throughput. As a cost-effective straight grinder, it is aimed at workshops and production environments where reliable, repeatable performance counts. The free-running speed is particularly beneficial for tasks such as light surface preparation, deburring and smoothing of welded seams, where the high rpm reduces the number of passes required and therefore the overall processing time. Ergonomic form that eases daily use With a weight of only 0.6 kg and a total length of 175 mm, the grinder offers a compact envelope that improves access in confined areas and reduces operator strain during prolonged use. The reduced mass assists in steady handling and better control when working on small components or intricate surfaces. This ergonomic balance supports smoother work sequences, helping teams to maintain consistent quality over longer shifts without sacrificing comfort or control. Robust workshop fit and straightforward integration The tool’s pneumatic design ensures straightforward integration into established compressed-air tool fleets and offers proven resilience under continuous operation. The 6 mm collet capacity provides compatibility with a wide range of small-diameter grinding and sanding accessories commonly used for finishing tasks. As a reliable Vertex product, the VAG-604 represents a practical option where affordability and dependable performance are required, making it suitable for metalworking shops, maintenance departments and production lines seeking a compact straight grinder. Choose the Vertex VAG-604 for efficient, ergonomic finishing—contact Metav Werkzeuge in Emmerich for availability and expert guidance. Technical data Article number: VAG-604 GTIN: 4061905085079 Brand: Vertex Product type: Pneumatic straight grinder ECLASS: 21060101 Facts Speed: 22,000 r.p.m. Weight: 0.6 kg Length: 175 mm Collet capacity: 6 mm Special features Pneumatic operation Cost-effective model Compact design for confined spaces Suitable for finishing and deburring tasks FAQ What is the maximum speed of the tool? The Vertex VAG-604 pneumatic straight grinder runs at 22,000 r.p.m., offering high-speed operation for efficient finishing. What collet diameter does it accept? The VAG-604 features a 6 mm collet capacity suitable for small grinding and sanding accessories. How heavy and how long is the grinder? The Vertex VAG-604 weighs 0.6 kg and has a length of 175 mm, designed for comfortable handling and access in tight areas. What type of drive does this tool use? This model is pneumatically driven, making it compatible with standard compressed-air tool setups. Which product identifiers are relevant for ordering? Refer to the SKU VAG-604 and GTIN 4061905085079 when enquiring about the Vertex pneumatic straight grinder Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6 mm Pneumatic File 3,700 Cycle/min, 175 mm Length - Vertex
Take advantage of the combination of fast finishing, compact handling and wide material compatibility for efficient workshop results; order the VAG-318 directly via Metav Werkzeuge or ask our consultants for application advice. VAG-318 Pneumatic file with 6 mm collet and 3,700 strokes/min — Vertex The VAG-318 is a compact pneumatic file designed for precision shaping and finishing in metalworking, woodworking, shoemaking and mould maintenance. 6 mm collet for standard file bits 3,700 strokes per minute performance Lightweight 1.25 kg housing for ease of handling Compact 175 mm length for tight spaces Fast material removal that keeps production moving With a rated 3,700 strokes per minute, this air-powered finishing tool accelerates stock removal and produces a consistent surface texture across different substrates. The high stroke rate translates directly into shorter processing times for deburring and profiling tasks on metal and wood, while the steady reciprocating action supports controlled finishing on shoe components and moulds. For workshops focused on throughput, the measurable increase in cycle speed offers a clear efficiency gain without complex setup. Precision access in confined or detailed workpieces The short 175 mm overall length and balanced mass make the tool particularly suitable where space is limited or fine control is required. The 6 mm collet accepts standard file bits, enabling straightforward replacement and compatibility with widely used consumables. At 1.25 kg, the unit reduces operator fatigue during extended use, improving repeatability when shaping edges or working on delicate contours. These physical attributes provide practical benefits in everyday workshop tasks where accuracy matters. Simple integration and consumable compatibility Designed as a pneumatic tool, the VAG-318 integrates with standard compressed-air systems commonly found in industrial and small-scale workshops, allowing quick adoption without electrical modifications. The standard collet size means common file inserts are compatible, simplifying inventory and reducing downtime for part changes. This compatibility supports a smoother workflow and helps maintain consistent quality across varied jobs, from prototype finishing to repeat production runs. Reliability, ergonomics and workshop productivity As a tool from Vertex, the product combines focused design for finishing tasks with handling features that support continuous operation. The compact form factor and measured stroke rate reduce the need for multiple specialised tools, streamlining the toolset required at the bench. Alongside tangible productivity improvements, users gain confidence from consistent performance and adaptable use across metal, wood, shoe and mould applications, contributing to a dependable everyday workflow. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VAG-318 into the workshop or to request detailed application guidance from our consultants Technical data Article number: VAG-318 GTIN: 4061905083464 Manufacturer: Vertex Facts Stroke rate: 3,700 strokes per minute Collet / shank: 6 mm Weight: 1.25 kg Length: 175 mm Applications & features Tool type: pneumatic file Suitable for: metal, wood, shoes, moulds FAQ What file bit shank size does the tool accept? The VAG-318 uses a 6 mm collet and accepts standard 6 mm shank file bits for straightforward replacement. Which materials can be processed with this pneumatic file? The tool is suitable for metal, wood, shoe materials and moulds, providing versatile finishing across workshop applications. How fast does the tool operate in typical use? Rated at 3,700 strokes per minute, the VAG-318 delivers high-frequency reciprocating motion for efficient material removal and consistent surface finish. Is the tool suitable for tight or confined spaces? Yes. With a compact 175 mm length and a lightweight design, the file is intended for precise work in restricted areas. What is the model and manufacturer information for replacement parts? Replacement parts and consumables can be specified using the SKU VAG-318 and Manufacturer Vertex; use these references when enquiring about compatible file bits. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Druckluft-Bandschleifer
Technische Daten: Bezeichnung: Druckluft-Bandschleifer Vollhartmetall Abmessung: 10x330mm (Gurt) bis 20x520mm (Gurt) Geeignet für: das Schmiergeln von gebogenen und flachen Oberflächen Gewicht: 0,8 kg bis 1,1 kg Länge: 290 mm bis 360 mm Geschwindigkeit: 16000r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Secure precise, repeatable setups on the grinding machine
Precision grinding vices, also referred to as grinding vices, precision grinding clamps or toolmaker's vices, are high-precision clamping devices engineered for the most demanding flat and profile grinding, high-precision measuring and EDM processes. They provide rigid, referenceable support so that components retain their geometric orientation even when the vice is rotated, tilted or mounted on a magnetic chuck.
How they deliver accuracy where it matters
These vices are manufactured from high-quality, through-hardened and stress-relieved alloy steel, with all outer faces, support surfaces and guideways ground to tolerances in the thousandth of a millimetre. The all-round right-angled and plan-parallel machining of the base body allows the vice and the clamped workpiece to be positioned flexibly on the machine without losing the original reference alignment. A built-in low-pull mechanism draws the movable jaw slightly down when the thread is closed, pressing the workpiece firmly and without play onto the support face and preventing any lifting during clamping. For precise angled work, sinuous setups using a sinus grinding vice on support studs with standard parallels enable mathematically exact setting of any incline.
Practical advantages that improve shop-floor productivity
- Reduced set-up time through perfectly plan-parallel reference surfaces and flexible positioning on magnetic chucks
- Increased machining accuracy thanks to thousandth-of-a-millimetre tolerances on guideways and support faces
- Reliable workholding with the low-pull mechanism, avoiding part lift and ensuring repeatable contact pressure
- Versatile angle machining when combined with sinus grinding vices and standard parallels
- Durable performance from through-hardened alloy steel, minimising wear and maintaining geometry over time
Technical essentials at a glance
- material: through-hardened, stress-relieved alloy steel
- surface tolerance: ground to thousandth-of-a-millimetre accuracy on all bearing and guide faces
- clamping principle: integrated low-pull mechanism for downward jaw engagement
- angular machining: compatible with sinus grinding vices, support studs and standard parallels
- typical applications: flat grinding, profile grinding, high-precision measuring, EDM (electrical discharge machining)
Why choose Metav as your precision partner
Metav stands for the democratisation of precision. Based in Emmerich, Metav acts as a quality filter for the European market and combines decades of technical know-how with a comprehensive range for industry, trade and specialist retailers. With more than 48,000 trusted customers and over 250,000 products, Metav provides reliable supply from Emmerich to your workshop bench. The Metav assortment is positioned as a smart, dependable choice for buyers seeking consistent quality and broad selection when specifying precision grinding vices and related tooling.
Trusted precision, ready for production
Precision grinding vices deliver the rigid reference surfaces, repeatable clamping and angular flexibility that are essential for achieving highest surface finishes and dimensional accuracy in tool and mould making. As part of a well-chosen setup, these vices form the technical foundation for consistent production quality.
FAQ
What makes a precision grinding vice different from a standard vice?
A precision grinding vice is designed and ground all around to extremely tight tolerances and is usually made from through-hardened alloy steel; the result is fully plan-parallel reference surfaces and features such as a low-pull mechanism that prevent workpiece lift during clamping.
Can I use a grinding vice on a magnetic chuck and tilt it without losing accuracy?
Yes. The base body of a precision grinding vice is processed to be right-angled and plan-parallel on all faces, allowing secure placement and rotation on a magnetic chuck without losing the original reference alignment.
How does the low-pull mechanism improve clamping reliability?
The integrated low-pull mechanism draws the movable jaw slightly down when the thread is closed, pressing the part onto the support face with high contact pressure and eliminating any minimal lifting that can otherwise occur during clamping.
Are sinus grinding vices required for angled work?
Sinus grinding vices or equivalent setups are recommended for precise angled grinding; they rest on support studs and use standard parallels to set any desired inclination mathematically and reproducibly.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com