Digital torque wrench
A digital torque wrench from Metav IndustryLine delivers precise, electronic feedback for accurate fastening. These tools combine high-precision sensors, clear digital displays and easy data capture to improve repeatability and safety. Ideal for workshops and industry, the electronic torque wrench simplifies torque control and documentation.
0.9-30 N·m Digital Torque Wrench 1/4" Mini 230mm, Angle/Peak Modes, LED/Beep, 4 Units - Metav IndustryLine
Benefit from precise torque control, compact 230 mm reach and audible/visual set-point signalling for reliable assembly results; order directly via Metav Werkzeuge or ask our consultants for application advice. Digital torque wrench 1/4" MWK.9211-1400 — Mini, 0.9–30 Nm, 230 mm (Metav IndustryLine) The Digital torque wrench 1/4" MWK.9211-1400 is a compact, battery-powered torque wrench designed for precision fastening and maintenance work where space is limited and repeatability is required. Compact 230 mm length for tight access Torque range 0.9–30 Nm for versatile tasks Audible and LED signal on reaching set value DIN EN ISO 6789 compliant torque tool Precision control that reduces rework and increases throughput The mini digital wrench delivers a torque range of 0.9–30 Nm, combining fine resolution with practical reach in a 230 mm tool length. This span covers delicate assembly up to moderate fastening tasks common in maintenance, small machinery and light production. Accuracy is specified at ±2% clockwise and ±2.5% counter‑clockwise, which keeps bolting within narrow tolerances and reduces the risk of over- or under‑tightening. Conformity with DIN EN ISO 6789 provides a measurable quality statement for audit trails and in-house quality checks, enabling consistent results across repeated cycles. Immediate feedback and data retention for traceability Operators benefit from both peak mode and real-time mode, offering flexibility between capturing the maximum torque and monitoring live torque values during application. The wrench uses an LED and an audible signal tone to announce when the preset torque is reached, supporting reliable manual operation even in noisy environments. Measurement units are switchable across 4 units (ft‑lb, in‑lb, N·m, kgf‑cm), and the internal memory stores up to 99 data sets, simplifying process documentation and short‑term traceability without additional equipment. Practical design for everyday workshop use A lightweight, compact layout and reversible operation (right and left rotation) make the tool suitable for both tightening and controlled loosening tasks in confined assemblies. The drive accepts standard 1/4" accessories and runs on common AAA or AA batteries (not supplied), which eases field replacement and avoids special battery procurement. An automatic shut‑off after 5 minutes conserves battery life during intermittent use. These features combine to offer a pragmatic balance between precision metrology and workshop ruggedness. Suited to quality routines, service and small series production The instrument is well suited to final assembly checks, maintenance benches and quality control stations where documented torque application is mandatory. The combination of compact footprint, reliable signalling and stored results supports faster cycle times and lowers the incidence of corrective work. For organisations that require a torque tool with certified behaviour and convenient handling, this mini digital wrench represents a rational investment in process reliability and operator efficiency. Choose the Metav IndustryLine mini digital torque wrench for dependable, certified torque control and contact Metav Werkzeuge for tailored advice or order support directly from our Emmerich facility. Technical data Article number: MWK.9211-1400 Manufacturer: Metav IndustryLine Model: Digital torque wrench 1/4" 0.9–30 Nm Label: Digital torque wrench 1/4", 0.9–30 Nm, mini 230 mm Facts Torque range: 0.9–30 Nm Length: 230 mm Accuracy: clockwise ±2%, counterclockwise ±2.5% Memory capacity: 99 data sets Units: 4 (ft‑lb, in‑lb, N·m, kgf‑cm) Auto shut‑off: after 5 minutes Power: AAA or AA batteries (not included) Special features Compliance: DIN EN ISO 6789 Operation modes: peak mode and real‑time mode Alerts: signal tone and LED indicator Rotation: right and left rotation supported Compact design for tight access FAQ How accurate is the digital torque wrench? Accuracy is specified as ±2% clockwise and ±2.5% counterclockwise for the Digital torque wrench 1/4" MWK.9211-1400, meeting practical workshop tolerances for controlled assembly. Which torque units can be used with the tool? The wrench supports four units—ft‑lb, in‑lb, N·m and kgf‑cm—allowing direct use with different assembly specifications without manual conversion. Can the wrench store measurement results for documentation? Yes, the tool stores up to 99 data sets, enabling short‑term traceability of fastening operations directly on the device. Is a certificate or standard compliance supplied with the tool? The product conforms to DIN EN ISO 6789, which denotes compliance with recognised torque tool standards for consistent performance. What batteries does the device require and are they included? The device runs on AAA or AA batteries; batteries are not included in the delivery. Is the wrench suitable for both tightening and controlled loosening? Yes, the tool supports both right and left rotation, making it suitable for tightening and controlled loosening tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
350mm Digital Torque Wrench 1/4" 1.5–30 Nm, Audible/LED Alert, Data Memory - Metav IndustryLine
Benefit from precise torque control, a clear digital readout and compliance with recognised calibration standards for consistent assemblies; order directly via Metav Werkzeuge or contact our consultants for specification advice. Digital torque wrench 1/4" — 1.5–30 N·m, 350 mm (Metav IndustryLine) The Digital torque wrench 1/4" 1.5–30 N·m 350 mm is a precision setting tool for maintenance and assembly work where documented torque control and repeatability are essential. Digital display with peak and real-time modes Audible tone and LED torque confirmation Four torque units and 99 data sets storable 1/4" square drive, 1.5–30 N·m range Repeatable tightening through verified accuracy The digital setting mechanism delivers controlled torque across the specified 1.5–30 N·m range, helping to avoid under‑ or over‑tightening on structural and service fastenings. Calibrated to the recognised standard DIN EN ISO 6789, the tool provides measured reproducibility and auditability for production batches. Stated tolerances of ±2% clockwise and ±2.5% counterclockwise define the expected deviation band during normal operation, which supports quality protocols and reduces rework. For workshop managers and quality engineers, this level of control translates into fewer joint failures and more predictable assembly outcomes. Immediate feedback and data for process control A bright digital display shows set and achieved torque values; the integrated signal tone and LED offer immediate, unambiguous feedback when the preset torque is reached. The instrument stores 99 data sets, enabling batch traceability and quick verification during inspections. Four selectable units (ft‑lb, in‑lb, N·m, kgf‑cm) remove conversion guesswork and promote consistency across teams and documentation. Both peak and real‑time modes are available: peak mode captures the maximum applied torque for intermittent checks, while real‑time mode is suited to continuous monitoring during controlled tightening sequences. Robust ergonomics for everyday workshop use At an overall length of 350 mm with a 1/4" square drive, the device balances reach and manoeuvrability for typical maintenance tasks and smaller assembly jobs. Operation in both clockwise and counterclockwise directions is supported, widening the tool’s applicability in reverse‑thread or rework scenarios. Power is supplied by commonly available AAA or AA batteries, and an automatic shut‑off after five minutes preserves battery life between uses. The compact format and clear readout make the wrench suitable for handheld applications where rapid, documented torque actions are required without complex set‑ups. Proven partner for delivering measurable precision The Metav IndustryLine name stands for accessible accuracy and workshop reliability: a pragmatic product portfolio backed by central logistics in Emmerich and a long track record supplying industry and trade. Choosing this Metav‑branded torque tool aligns practical workshop needs—ease of use, traceability and recognised calibration—with a supplier experienced in serving production environments. The result is an instrument that supports both day‑to‑day maintenance and formal quality procedures without unnecessary complexity. For documented torque control and reliable traceability, request the Metav IndustryLine digital torque wrench from Metav Werkzeuge in Emmerich or consult our specialists for specification support Technical data Article number: MWK.9211-1401 Brand: Metav IndustryLine Product type: Digital torque wrench Facts Torque range: 1.5–30 N·m Drive size: 1/4" Length: 350 mm Memory: 99 data sets Accuracy: ±2% (clockwise), ±2.5% (counterclockwise) Units: ft‑lb, in‑lb, N·m, kgf‑cm Power: AAA or AA batteries (not included) Auto shut‑off: 5 minutes Special features Conforms to DIN EN ISO 6789 Peak value mode and real‑time mode Audible signal and LED on reaching preset torque Bi‑directional operation (right/left rotation) FAQ Is the torque wrench supplied calibrated? The Metav IndustryLine digital torque wrench is supplied with calibration traceable to the declared standard; the product is specified in accordance with DIN EN ISO 6789. Which torque units can be selected on the tool? The tool supports ft‑lb, in‑lb, N·m and kgf‑cm, allowing direct readings in the unit required for documentation and avoiding manual conversions. How many torque measurements can be stored? The wrench can store 99 data sets, enabling batch records and quick retrieval of recent measurement results for inspection. What power source does the wrench use and is it included? Power is from standard AAA or AA batteries; batteries are not included with the delivery of the MWK.9211-1401 unit. Can the wrench be used for both tightening and loosening operations? Yes, the device supports both clockwise and counterclockwise operation and provides separate accuracy specifications for each direction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3–60 Nm 420 mm Digital Torque Wrench 3/8" Adjustable, Data Memory, LED/Buzzer Alerts - Metav IndustryLine
Take advantage of reliable torque control and traceable results with a compact battery-powered tool that covers a versatile 3–60 Nm range and signals when preset values are reached; order through Metav Werkzeuge for dependable delivery and specialist advice. Digital torque wrench 3/8" MWK.9211-3810 — 3–60 Nm, 420 mm, Metav IndustryLine The Digital torque wrench 3/8" MWK.9211-3810 is a battery-operated precision tool for assembly and maintenance work, offering reversible operation and clear visual and audible signalling for controlled tightening. DIN EN ISO 6789 compliant Torque range 3–60 Nm LED and audible torque signal 99 datasets memory Consistent accuracy for repeatable assemblies The Metav IndustryLine digital wrench delivers controlled tightening with an accuracy of 2% clockwise and ±2.5% counterclockwise, meeting the expectations of workshop and service applications. Compliance with DIN EN ISO 6789 confirms suitability for quality-assured assembly tasks and audits. The instrument supports both peak mode and real-time mode, enabling selection between single-event capture and continuous monitoring; this reduces rework and provides repeatable results in production and maintenance environments while simplifying specification compliance. Traceable results and straightforward data handling Equipped to store 99 datasets and capable of displaying four units (ft-lb, in-lb, N·m, kgf-cm), the device supports on-the-spot documentation and straightforward unit conversion for mixed workflows. An LED indicator and audible tone alert when the preset torque is reached, helping to avoid over- or under-tightening. Power is supplied by AA/AAA batteries, which are widely available and quick to replace, while the automatic shut-off after five minutes preserves battery life for busy service routines. Designed for efficient workshop use The tool combines a 3/8" drive with a 420 mm overall length for a favourable balance between reach and control, making it well suited for constrained assembly spaces as well as routine workshop benches. Reversible right/left operation allows fast switching between tightening and loosening without tool changes, and the compact layout reduces handling time. Clear visual and acoustic feedback supports faster cycle times and reduces operator uncertainty during repetitive tightening tasks. Reliability and support that matter on the shop floor Constructed for everyday industrial use, this electronic torque wrench integrates practical functions such as dataset storage and multi-unit readouts to support traceability and process control. As an offering from Metav IndustryLine, the product benefits from a distribution network centred in Emmerich that emphasises consistent availability and pragmatic technical support — a reassurance for buyers seeking dependable delivery and quality-assured tools for production and maintenance. Choose the Metav IndustryLine digital torque wrench for assured torque management and contact Metav Werkzeuge in Emmerich for technical guidance or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MWK.9211-3810 Product: Digital torque wrench 3/8", 3–60 Nm, 420 mm Label: Drehmomentschlüssel Digital 3/8", 3 - 60 NM 420 mm Brand: Metav IndustryLine UID: MWK.9211-3810 Key specifications Torque range: 3–60 Nm Drive size: 3/8" Length: 420 mm Memory capacity: 99 datasets Units: ft-lb, in-lb, N-m, kgf-cm Accuracy: clockwise 2%, counterclockwise ±2.5% Battery type: AAA or AA Automatic shut-off: after 5 minutes Special features DIN EN ISO 6789 compliant Peak-value (spitzenwert) mode and real-time mode Signal tone and LED display on reaching preset torque Reversible right/left operation Four selectable measurement units 99 stored datasets for traceability FAQ How accurate is the torque measurement? The device achieves an accuracy of 2% clockwise and ±2.5% counterclockwise, suitable for most assembly and maintenance requirements where documented torque control is needed. Does the wrench meet any standards for torque tools? Yes, this tool is compliant with DIN EN ISO 6789, confirming its suitability for controlled torque applications and quality procedures. Which power source does the torque wrench use? The instrument runs on widely available AA or AAA batteries, enabling fast replacement in the workshop; batteries are not included. Can measurement units be changed on the device? Yes, the display can be switched between ft-lb, in-lb, N·m and kgf-cm, allowing use across different specifications and international contexts. How is the reached torque indicated? Reaching the preset torque is signalled by an audible tone and an LED indicator, providing immediate operator feedback and reducing the risk of incorrect torque application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
590mm 17-340 N·m Digital Torque Wrench, 1/2" Drive, Data Memory, LED/Beep Alerts - Metav IndustryLine
Take advantage of precise, traceable torque control from 17–340 Nm combined with bidirectional accuracy and onboard memory for reliable assembly processes; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital torque adjustable wrench 1/2" — 17–340 Nm, 590 mm (Metav IndustryLine) The Digital torque adjustable wrench 1/2" — 17–340 Nm, 590 mm is a workshop-grade, bidirectional torque tool designed for controlled tightening and quality-assured assembly in industrial and maintenance environments. DIN EN ISO 6789 compliant 17–340 Nm torque range 99 dataset onboard memory Audible and LED torque signalling Consistent accuracy for critical assemblies The instrument delivers high repeatability across its working range of 17–340 Nm, with specified accuracy of 2% clockwise and ±2.5% counterclockwise, ensuring reproducible joint preload. Compliance with DIN EN ISO 6789 confirms the manufacturing and calibration standards applied to the tool, making it suitable for production lines and maintenance tasks where documented accuracy matters. The 1/2" drive and 590 mm overall length provide the mechanical advantage needed for medium‑to‑heavy fasteners while maintaining ergonomic handling. Built‑in documentation and intuitive feedback Equipped with peak-value and real-time modes, the wrench supports both impulse‑style and continuous monitoring of torque. Immediate feedback is provided via an audible tone and LED indication once a preset torque is reached, reducing the risk of over‑ or under‑tightening. The device stores 99 datasets and offers four selectable units (ft‑lb, in‑lb, N·m, kgf‑cm), which streamlines traceability for quality control and simplifies handover to production records. Automatic shut‑off after five minutes and battery flexibility (AAA or AA) make field use practical and cost‑effective. Robust workshop performance and integration Designed for workshop environments, the tool supports bidirectional operation for assemblies that require verified torque in both tightening and loosening directions. The 590 mm length balances reach and stiffness to avoid measurement artefacts from bending. Memory and unit flexibility facilitate integration into existing test routines or digital procedures, while the clear visual and acoustic signals help operators maintain pace without sacrificing accuracy. Metav IndustryLine’s quality filter in Emmerich ensures that the product is backed by a distribution and service network geared to industrial customers. For documented torque control and traceable results, request application support from Metav Werkzeuge — supplied from Emmerich with expert technical advice and fast dispatch. Technical Data Article number: MWK.9211-1230 Label: Drehmomentschlüssel Digital 1/2", 17 - 340 NM 590 mm Manufacturer: Metav IndustryLine UID: MWK.9211-1230 Key figures Torque range: 17–340 Nm Drive: 1/2" Length: 590 mm Accuracy clockwise: 2% Accuracy counterclockwise: ±2.5% Memory: 99 datasets Units: ft-lb, in-lb, N-m, kgf-cm Auto shut-off: 5 minutes Battery: AAA or AA Special features DIN EN ISO 6789 compliance Bidirectional (clockwise and counterclockwise) operation Peak-value mode and real-time mode Audible tone and LED indication at preset torque Four selectable torque units Onboard storage of 99 measurement sets FAQ What torque range does the tool cover? The digital torque adjustable wrench covers a torque range of 17–340 Nm, suitable for medium to heavy assembly tasks. Is the wrench suitable for clockwise and counterclockwise measurements? Yes — the tool supports bidirectional operation, with accuracy specified as 2% clockwise and ±2.5% counterclockwise. How is torque feedback provided to the operator? Feedback is given via an audible tone and an LED indicator when the preset torque value is reached; both peak and real‑time modes are available. Can measurement results be stored for traceability? The wrench stores up to 99 datasets onboard and allows measurements in four units (ft‑lb, in‑lb, N·m, kgf‑cm), enabling straightforward documentation. What power source does the device use? The device operates on AAA or AA batteries (not included) and features automatic shut‑off after five minutes to preserve battery life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Why a Digital Torque Wrench Matters for Accurate Assembly
A Digital Torque Wrench is a specialised Tool that applies a defined Torque to fasteners such as Screws and Nuts, ensuring reliable joint integrity. This Text explains how a Digital Torque Wrench works, where it is used, and why professionals choose electronic models over conventional mechanical alternatives. The focus is on precise, reproducible results in Workshop and Maintenance contexts.
How the Tool Works and Where It Excels
Electronic models use high-precision Sensors and an Electronic Display to show current Torque values in real time. Compared to mechanical wrenches, the Digital Torque Wrench provides Real-time Feedback and optional Data Logging, enabling traceable results for Quality Control. Typical Applications include automotive assembly, industrial maintenance, and any situation where correct tightening prevents component failure. Because the Tool measures and alerts at the target Torque, Over-Tightening and Under-Tightening risks are significantly reduced.
Practical Benefits and Why You Need One
Professionals select a Digital Torque Wrench for repeatable Accuracy, documented proof of assembly, and faster workflow. The rational advantage is clear: consistent Torque reduces rework and warranty claims, improving operational Efficiency. In addition, modern Devices offer user-friendly menus and multiple units (Nm, ft‑lb) for international use, which increases Compatibility across projects. For teams concerned with compliance and traceability, the capability to export logged Data is decisive.
Main Features That Make a Difference
- Accuracy: High-precision Sensors for repeatable results
- Torque Range: Flexible span to cover light to heavy-duty applications
- Data Logging: Store and export Torque readings for Documentation
- Calibration: Maintain Reliability with straightforward Calibration procedures
- Build Quality: Robust Construction for workshop durability
Why Metav IndustryLine Leads the Field
Metav IndustryLine is presented as an outstanding Manufacturer in this category. Their Systems combine reliable Sensors, clear Electronic Display interfaces, and durable housings designed for professional daily use. The Manufacturer’s focus on Calibration support and Service adds long-term value for Workshops that demand consistent Performance.
Clear Summary and Final Recommendation
In one sentence: a Digital Torque Wrench delivers precise, documentable Torque control for safer, more efficient assemblies.
To conclude, the most important point is that choosing a Digital Torque Wrench ensures repeatable Precision, improves Quality Assurance, and supports traceable workflows for professional applications. If you require guidance on matching a Tool to your Torque Range or Calibration needs, our Support is ready to assist.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com
FAQ
What is a Digital Torque Wrench and how does the Digital Torque Wrench from Metav IndustryLine differ from a standard torque wrench?
A digital torque wrench is an advanced precision tool that applies a specific torque to a fastener such as a bolt or nut and provides electronic real-time feedback via a display. The Digital Torque Wrench from Metav IndustryLine offers higher accuracy through precise sensors and digital control technology, easier operation with instant readouts, and improved data capture compared with conventional mechanical torque wrenches.
How accurate are electronic torque wrenches like the Metav IndustryLine Digital Torque Wrench and can they record measurements?
Electronic torque wrenches generally measure torque more precisely than mechanical models. The Metav IndustryLine Digital Torque Wrench uses high-precision sensors and digital electronics to deliver accurate torque readings. Many digital models also support data logging or connectivity for recording measurements, improving traceability and quality control.
Do I need special maintenance for a digital torque wrench?
Routine care is recommended: keep the wrench clean, avoid impacts, store it in its case, and periodically have it calibrated according to the manufacturer’s guidelines to ensure continued accuracy.
Can the Digital Torque Wrench be used in industrial environments and what safety considerations should I follow?
Yes, electronic torque wrenches are suitable for industrial use due to their precision and repeatability. Follow standard safety precautions: wear appropriate PPE, ensure the tool is suitable for the torque range required, and never use the wrench as a hammer or pry bar.