130mm Insert Prism Gr. B Clamping Ø 20mm For Quick-Change Holder - TECWERK
Take advantage of precise radial clamping and straightforward compatibility in one compact component; the prism insert delivers steady engagement for round shank bars and integrates easily with interchangeable holders — order the part directly via Metav Werkzeuge or consult the team for application advice. TECWERK Prism Insert Size B — 20 mm clamping Ø, 130 mm length The Prism Insert Size B secures round shank bars in interchangeable holders, providing repeatable radial positioning for machining and assembly tasks. Prism insert Size B compact design Clamping Ø 20 mm for round shanks Length 130 mm for stable engagement For interchangeable holders with prism Secure, repeatable clamping for round shank bars A prism insert is designed to transform a conventional holder into a reliable radial clamping system. This insert uses a V-shaped contact geometry to centre and stabilise cylindrical shanks, producing consistent axial alignment and reduced runout. With a clamping diameter of 20 mm and a length of 130 mm, the component offers a balance of engagement depth and compact form, helping to maintain machining accuracy without excessive overhang. The design reduces setup variability and supports efficient changeovers in production environments where consistent part positioning is critical. Compatibility with interchangeable holders and easy integration Engineered for use with interchangeable holders, the insert fits into standard prism-equipped change holders and adapts those assemblies for round shank components. The item is sized as Size B, which indicates the dimensional family and ensures predictable fitment in matching holder systems. Installation requires straightforward insertion into the prism pocket of the holder; once located, the insert provides an immediate clamping interface for cylindrical tooling or workpieces. This approach minimises the need for bespoke fixtures and simplifies inventory of clamping elements across different machines. Practical benefits for workshop and production use Adopting a prism insert for routine clamping tasks delivers operational advantages: improved repeatability, reduced rework and less time spent on manual alignment. The moderate length confers stability under light to medium loads while keeping the overall assembly compact for confined setups. For operations handling multiple identical shafts or bars, the insert supports rapid, consistent seating that preserves tool life and contributes to predictable cycle times. The component is particularly suited to setups where radial precision matters more than heavy axial loading. What to consider during selection and use When selecting a prism insert, confirm the holder compatibility and verify the effective clamping range after installation — here the system provides a maximum clamping Ø of 20 mm for round shank bars once the insert is in place. Size family (B) should match the holder specification to avoid play. Although this insert delivers precise radial support, its suitability for a specific machining task depends on load direction and cutting forces; match the component to the intended application to ensure optimal performance. For tailored advice on integrating TECWERK prism inserts into existing toolholding systems, contact Metav Werkzeuge in Emmerich for application guidance and parts availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832142NW Manufacturer: TECWERK Product type: Prism insert (Einlegeprisma) Size designation: B Data Clamping diameter: 20 mm Length: 130 mm Packaging unit: 1 Special features For interchangeable holders with prism For round shank bars Clamping Ø = max possible clamping Ø after prism insertion FAQ How does the prism insert improve concentricity compared with plain clamping? The prism insert centres round shank bars by V-shaped contact surfaces, so the TECWERK prism insert Size B reduces radial runout and provides more consistent concentricity than unsecured seating. Which holder types accept this prism insert? The component is intended for interchangeable change holders equipped with a prism pocket; compatibility requires a Size B receptive pocket in the holder for correct seating. What is the maximum shank diameter that can be clamped with this insert? After the prism insert is fitted in the holder, the effective maximum clamping diameter is 20 mm for round shank bars. Is the prism insert suitable for heavy axial loads? The insert provides stable radial support and moderate axial stability; for heavy axial forces, verification against holder and application constraints is recommended before use. Can the insert be used for repeatable production indexing? Yes — the repeatable seating and centring behaviour of the prism insert supports consistent positioning across multiple workpieces in serial production. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Insert Prism Clamping Ø25 For Quick-Change Holder, For Round Shank - TECWERK
The compact design combines clamping Ø 25 mm capacity with a length of 160 mm for stable gripping of round shanks, making it a pragmatic choice for modular toolholders; order the prism insert via Metav Werkzeuge or consult the team for compatibility advice. TECWERK Insert prism Gr. C – Clamping Ø 25 mm, L 160 mm The TECWERK insert prism Gr. C is a precision clamping element for interchangeable holders, designed to secure round shanks with a maximum clamping diameter of 25 mm in modular toolholding systems. Size C insert prism For interchangeable holders with prism Clamping Ø 25 mm maximum Length 160 mm Consistent grip and process reliability The prism insert delivers a reproducible clamping geometry that reduces slippage and runout when securing round shanks. By converting a circular shaft to a defined three-point contact, the component increases axial and radial stability during machining or inspection setups. The clear specification of clamping Ø 25 mm and the modular format help engineers plan tool chains with predictable tolerances and minimised rework, improving throughput in small-batch and series production alike. Faster set-up through modular compatibility Designed for use with interchangeable holders, the prism insertion shortens changeover time and simplifies tool management on the shop floor. The length 160 mm provides adequate reach while maintaining rigidity in the holder, so fixtures and jigs remain stable under cutting or measuring forces. The modular approach supports lean workflows: standardised inserts reduce the number of bespoke fixtures, making maintenance and stock control more efficient across workshops and production cells. Selection guidance for accurate integration Choose the Size C prism insert when the application requires a dedicated clamping solution for round shanks up to 25 mm. The specification emphasises compatibility rather than material assumptions; confirmation of holder interface and shank geometry prevents misfits and downtime. For procurement and planning, treat the prism insert as a component of a modular clamping system: matching the insert size to the toolholder and documenting the length 160 mm in the fixture list ensures reproducible assembly and predictable quality outcomes. Contact Metav Werkzeuge for personalised technical advice on TECWERK prism inserts and to confirm holder compatibility before ordering. Technical data Article number: 2000832143NW Name: Insert prism Gr. C (Einlegeprisma) Brand: TECWERK Facts Length: 160 mm Clamping Ø: 25 mm Pack unit: 1 Special features For interchangeable holders with prism For round shanks Size C insert prism Compatible with changeable prism holders FAQ What maximum shank diameter is supported by this prism insert? The TECWERK insert prism Gr. C supports a maximum clamping diameter of 25 mm for round shanks. Is this prism intended for modular holders or fixed fixtures? This prism insert is designed specifically for interchangeable holders with a prism interface, enabling modular toolholder systems. What is the functional length of the component? The component has a length of 160 mm, a dimension to consider when checking holder reach and fixture clearance. How does a prism insert improve clamping compared with a plain collet? A prism insert converts circular shanks into defined contact points, improving axial and radial stability and reducing slip and runout during machining or measuring operations. Which product code identifies this item for ordering? Order using article number 2000832143NW, listed as the TECWERK insert prism Gr. C Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Insert Prism Gr. C Clamping Ø 32mm For Toolholder With Prism - TECWERK
Take advantage of a Type C prism insert that provides secure clamping for round shanks and steady engagement with its 160 mm length; order directly via Metav Werkzeuge or ask the consultants for specification support. TECWERK Prism insert Type C — Prism insert for interchangeable holders, Ø 32 mm, L 160 mm Prism insert Type C for interchangeable holders, engineered to clamp round shanks with a maximum achievable clamping diameter of 32 mm and a length of 160 mm for deeper tool engagement. Prism insert Type C compatibility Secure clamping for round shanks Ø 32 mm Length 160 mm for deep engagement Designed for interchangeable prism holders Consistent clamping for repeatable machining A dedicated prism insert delivers a stable contact surface that converts round shanks into a reliably clamped interface. The clamping diameter 32 mm indicates the maximum achievable clamp after the insert is seated in the interchangeable holder; this value is decisive when matching tool shank sizes to the clamping system. By providing a defined contact geometry, the component supports repeatability in series production and reduces time spent on trial-and-error alignment. Faster tool changes with holder compatibility Designed specifically for use with interchangeable holders, the insert simplifies changeovers between operations. The prism seating ensures that round shanks locate consistently, which shortens set-up loops and helps maintain process flow. Where quick tool rotation between fixtures is required, the use of a purpose-made prism reduces the need for additional fixtures and enables a smoother workflow in mixed-production environments. Geometry and length that improve stability A length of 160 mm delivers deeper axial engagement within the holder, improving rigidity when working with longer shank lengths. Deeper insertion reduces bending moments transmitted to the clamping interface, which contributes to steadier cuts and prolonged tool life. The combination of the insert’s profile and its engagement length is particularly beneficial in operations that demand dimensional conformity across multiple workpieces. Practical selection and workshop integration Selection is straightforward: choose the Type C prism insert where the toolholder system accepts prism inserts and the intended shank diameter does not exceed Ø 32 mm. The component is intended for clamping round shanks and is fitted into a compatible interchangeable prism holder to achieve the specified maximum clamping diameter. For workshops seeking to streamline fixtures and reduce the variety of bespoke chucks, the prism approach offers a compact, specification-led solution with clear mechanical benefits. For supply and technical advice on this TECWERK prism insert, contact Metav Werkzeuge in Emmerich for fast order processing and specification assistance via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number/SKU: 2000832144NW Brand: TECWERK Product: Prism insert (Type C) Facts Length: 160 mm Clamping diameter (max): 32 mm Packaging unit: 1 Compatibility & features For interchangeable holders with prism For round shanks Clamping Ø = maximum achievable clamping diameter after inserting the prism into the holder Type: C FAQ What diameter of shank can be clamped with this prism insert? The maximum achievable clamping diameter when the prism insert is used in an interchangeable holder is 32 mm; match the shank accordingly. Which holder systems is this insert compatible with? The prism insert is designed for use with interchangeable prism holders (Type C); compatibility depends on the holder accepting a Type C prism seating. How does the 160 mm length affect performance? A 160 mm engagement provides deeper axial support in the holder, improving rigidity and helping to maintain dimensional stability during machining. Is the prism insert suitable for non-round tool shanks? The component is intended for round shanks; non-round geometries will require a different clamping solution. Can the SKU 2000832144NW be quoted for replacement parts? Yes, SKU 2000832144NW identifies this specific prism insert for orders and enquiries. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Insert Prism Clamping Ø14mm For Toolholder With Prism - TECWERK
Take advantage of a compact clamping solution that combines reliable repeatability with straightforward integration into prism-equipped quick-change systems; the precision 14 mm clamping Ø and 85 mm length ensure stable holding of round shanks in confined setups. Order the insert prism directly via Metav Werkzeuge or ask our consultants if needed. Insert Prism Gr. A – 14 mm clamping Ø, 85 mm length (TECWERK) The Insert Prism Gr. A is a precision clamping insert for round shanks, designed for use in quick-change holders fitted with a prism and intended for reliable, repeatable tool anchoring in production and maintenance environments Compatible with prism quick-change holders Max clamping Ø 14 mm 85 mm insertion length Precision clamping for round shanks Consistent, repeatable clamping for series work The prism insert delivers stable, repeatable clamping by locating round tool shanks in a defined groove that minimises radial play. With a max clamping Ø of 14 mm and an 85 mm insertion length, the component supports consistent concentricity during turning or light milling operations, reducing inspection rework and setup variability. The geometry is optimised for lateral stability, which helps maintain process quality across repeated tool changes. Seamless fit in prism-equipped quick-change holders Designed specifically for use with quick-change holders that incorporate a prism, the insert simplifies integration into modular tooling systems. The feature set from the product data emphasises compatibility with round shanks and prism-type holders, enabling rapid swaps while retaining alignment. This reduces machine downtime caused by lengthy re-clamping and supports fast tool replacement in multi-shift environments. Minimised setup time and improved throughput By combining defined locating with straightforward insertion depth, the component supports faster fixture setup and predictable run-out characteristics. The short, deterministic installation procedure helps technical teams keep cycle times steady, promoting smoother production flow. Where fixture repeatability is a priority, the insert contributes to lower scrap rates and more predictable part tolerances through reliable clamping behaviour. Simple handling and installation logic The clamping insert is supplied as a single unit and is intended for direct placement into the corresponding quick-change holder. The compact 85 mm length provides sufficient engagement for secure holding while remaining space-efficient in tight tool assemblies. The concise specification and single-piece supply make inventory management and replacement planning straightforward for workshop stores. Suitable users and typical applications This insert is aimed at industrial workshops, toolrooms and service departments that operate modular toolholding systems and require stable clamping of round shanks. Typical uses include general turning fixtures, light milling in modular holders, and rapid changeovers where improved concentricity and repeatability have a direct effect on part quality. The component supports manufacturers and maintenance teams seeking a compact, prism-based clamping solution. Contact Metav Werkzeuge for a direct order or technical consultation on prism compatibility — Metav’s specialists in Emmerich will advise on matching the TECWERK insert to existing quick-change holders and tooling systems, phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical data Article number: 2000832141NW Manufacturer: TECWERK Product type: Insert prism Gr. A For quick-change holders with prism Dimensions & clamping Length: 85 mm Max clamping Ø: 14 mm Packing unit: 1 Applications & features For round shanks Fits quick-change holders with prism insertion Precision clamping insert FAQ What clamping diameter does the insert support? The insert supports a maximum clamping diameter of 14 mm as specified for the Insert Prism Gr. A (TECWERK, SKU 2000832141NW). Which holders is this component compatible with? Compatibility is stated for quick-change holders fitted with a prism; the prism geometry secures round shanks when the insert is mounted. Is the insert suitable for round tool shanks only? Yes, the product data indicates suitability for round shanks; the prism profile is intended to locate cylindrical tool shanks securely. What is the supplied length and how does that affect installation? The insertion length is 85 mm, giving defined engagement depth for stable clamping while remaining compact for confined tool assemblies. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com