Precision marking gauges for accurate layout work
A precision marking gauge is a hand tool used to transfer measurements and scribe parallel lines to an edge, providing consistent setup for cutting, drilling and fitting operations. These marking gauges serve metalworking, woodworking and model-making tasks by enabling repeatable, clean scribed lines on plates, profiles and timber to support drill patterns, joints and fine detail work. Built from robust materials with adjustable stops and fine-setting options, they improve repeatability and minimise rework by ensuring accurate layout, repeatable scribing and stable edge reference.
200mm Digital Scratch Caliper With 50×33mm Scriber Plate And 5mm HSS Scriber, 0.01mm Resolution - Metav IndustryLine
Combine digital measurement reliability, a hardened HSS scribe tip and a compact 200 mm measuring range for fast, repeatable layout work in the workshop; order directly via Metav Werkzeuge or consult our specialists for technical advice. Digital scribing caliper M240.151 — 200 mm range, HSS scribe tip (Metav IndustryLine) A Digital scribing caliper M240.151 engineered for precise marking and layout tasks in metalworking and workshop metrology. Digital display with mm/inch selection Hardened HSS scribe tip for durable marking 200 mm range for standard workshop tasks 50 x 33 mm scribing plate for stable support Accurate layout that speeds production The combination of a digital display with a standard 0.01 mm resolution and a hardened HSS scribe tip ensures clear, reproducible scribe lines on metal components. As a workshop-grade instrument in the Standard class (measuring range up to 100–300 mm), it strikes a balance between reach and rigidity: the 200 mm span covers the most common layout tasks while the compact slider remains stable against torsion. The digital readout removes interpretation errors from a vernier scale, supporting faster set-ups and fewer rejected parts in series work. Streamlined handling for everyday measuring An ergonomic layout and straightforward controls reduce cycle time at the marking bench. The display offers ON/OFF, zero and mm/inch functions together with an additional reference key for rapid re-zeroing, facilitating quick swaps between metric and imperial workflows. The integrated 50 x 33 mm scribing plate gives a stable reference surface for repeated marks, while the 5 mm HSS scribe needle maintains a fine point under routine use. At around 0.6 kg, the instrument is robust yet easy to manoeuvre for one-person operation. Built to withstand workshop conditions The scribe tip is manufactured from hardened HSS steel, chosen for abrasion resistance and long service life when marking metals. The caliper’s construction prioritises repeatability: hardened contact faces and a firm clamping action reduce measurement drift during layout tasks. This makes the instrument suitable for marking workpieces prior to machining as well as for quality checkpoints where clear, permanent scribe lines are required. The device is classified for standard workshop metrology and integrates into regular inspection routines without specialist training. Practical fit for machine shops and toolrooms Intended for machine shops, toolrooms and maintenance departments, the instrument covers the common needs of component marking and transfer measurements. It is appropriate for work on mild and alloy steels, aluminium and other machinable materials where a precise scribe improves downstream alignment and machining accuracy. The digital readout and compact plate save time when transferring dimensions from drawings to workpieces, supporting leaner processes and fewer setup iterations. For workshop-ready layout precision from Metav IndustryLine, contact Metav Werkzeuge to discuss suitability, request technical details or arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge is ready to advise on integration into existing workflows Technical data Article number: M240.151 GTIN: 4054469168975 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Scribe plate: 50 x 33 mm Scribe needle diameter: 5 mm Weight: 0.6 kg Display functions: ON/OFF, zero, mm/inch, reference key Special features Hardened HSS scribe tip Digital readout for reduced interpretation errors Standard class caliper (100–300 mm) Category: scribing tools (Anreisszeuge) FAQ How precise is the digital readout on this scribing caliper? The digital readout has a resolution of 0.01 mm (0.0005 in), providing the standard precision expected from workshop-class digital calipers and clear numeric feedback for layout tasks. Is the scribe needle suitable for marking steel surfaces? Yes, the HSS scribe tip and the 5 mm needle diameter are intended for durable marking on steel and other machinable metals without rapid wear. Can the instrument switch between metric and imperial units? The caliper includes an mm/inch selection on the display, enabling quick unit changes for mixed-dimension workflows. What measuring category does this caliper belong to? With a 200 mm range, the instrument is in the Standard class (measuring range up to 100–300 mm), offering a practical compromise of reach and stiffness for machine-shop use. Is the scribing plate suitable for repeated marking operations? The 50 x 33 mm plate provides a stable support for repeated scribing and simplifies alignment during serial marking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Scriber Caliper With 50×40mm Scriber Plate And Adjustable Scribing Pin, Stainless Steel, Data Output RB 5 - Metav IndustryLine
For consistent workshop marking and dependable measurements, benefit from the combination of a 200 mm measuring range, 0.01 mm resolution and an adjustable scribing needle for repeatable layout work; order the Digital scribing caliper M240.152 directly via Metav Werkzeuge or ask our consultants if needed. Digital scribing caliper M240.152 — 200 mm, adjustable scriber, Metav IndustryLine Digital scribing caliper M240.152 is a purpose-built marking and measuring tool for metalworking and general workshop use, combining a compact 200 mm measuring range with a robust scribing plate and moveable scriber for precise layout and repeatable scores. 200 mm digital marking caliper 0.01 mm resolution with four-button display Adjustable scribing needle for precise layout Stainless steel body with solid measuring rod Precise marking and dependable workshop reach The Digital scribing caliper M240.152 places a 200 mm measuring range in the proven Standard class for workshop hand tools, offering the best compromise between reach and stiffness for everyday machine‑shop tasks. The 0.01 mm display resolution provides clear numerical feedback for reliable measurements, while the included 50 x 40 mm scribing plate gives a stable reference surface for scoring. Thanks to the massive measuring rod, the instrument resists torsion during lateral marking, improving repeatability when transferring dimensions to components. Clear digital feedback and secure data handling A tidy, user‑oriented digital display with ON/OFF, ZERO, UNIT and HOLD keys simplifies routine checks and reduces setting errors at the bench; the inch readout is available at 0.0005 in for mixed‑unit workflows. For process documentation the caliper offers data output RB 5, enabling downstream capture of measured values where required. The light‑weight construction at 0.6 kg keeps handling straightforward without compromising the rigid feel needed for accurate layout. Robust design built for everyday use Constructed from stainless steel with a metal housing, the tool tolerates standard workshop strains and keeps wear to a minimum. The adjustable scribing needle (5 x 60 mm) slides for fine positioning and fixes securely for repeat marks, while the solid 15 x 6 mm measuring rod is supplied with the instrument to ensure dimensional stability from the first measurement. Overall, the caliper is engineered for routine marking, quick checks and integration into a busy production environment. For hands‑on advice or to place an order for the Metav IndustryLine digital scribing caliper, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on suitability and delivery options. Technical data SKU: M240.152 Manufacturer: Metav IndustryLine Category: Marking tools (Anreisszeuge) GTIN: 4054469178356 Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Plate dimensions: 50 x 40 mm Scriber needle: 5 x 60 mm Measuring rod: 15 x 6 mm Power supply: 3 V Special features Stainless steel with metal housing Adjustable scribing needle Digital display with ON/OFF, ZERO, UNIT, HOLD Solid measuring rod included Data output: RB 5 FAQ What measuring range does this marking caliper cover? The instrument covers a measuring range of 0–200 mm, classifying it as a Standard workshop caliper suitable for general machine‑shop and metalworking tasks. How accurate is the readout of the device? The digital readout delivers a resolution of 0.01 mm (0.0005 in), providing precise numerical feedback for layout and verification work. Is the scribing needle adjustable and replaceable? Yes — the scribing needle on the Digital scribing caliper M240.152 is adjustable for exact positioning and is secured for repeat markings. Which materials is the caliper suited to mark and measure? With a stainless steel body and robust scribing plate, the caliper is ideal for marking and measuring common workshop materials such as steel and aluminium during layout operations. Does the caliper provide a data interface for recording measurements? The Digital scribing caliper M240.152 includes a data output designated RB 5 for integration with data collection systems where needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scratch Gauge Flat Stainless Steel Hardened Scribing Edge With mm Scale - Metav IndustryLine
Take advantage of a stainless steel, flat-profile design with a hardened scribing edge and clear millimetre scale to speed up layout work and reduce rework; order the marking gauge directly via Metav Werkzeuge or consult our specialists for selection advice. M201.194 marking gauge — Flat INOX scribing rule, 200 mm, Metav IndustryLine M201.194 marking gauge is a flat stainless steel scribing rule with a hardened scribing edge and a matt-chromed millimetre scale, designed for precise layout and scribing tasks in metalworking and general workshop applications. Flat INOX body for low-profile scribing Hardened scribing edge for repeatable marks Millimetre scale, analogue precision Precision and material that reduce layout error The flat stainless construction combines a low-profile form with robust surface hardness to support repeatable layout operations. The matt-chromed millimetre scale provides a clear analogue reference while the hardened scribing edge resists wear, so marks remain consistent over many cycles. As a tool in the standard measuring range (max 100–300 mm), this 200 mm rule balances reach and stiffness — a pragmatic choice for everyday workshop layout that minimises alignment errors and reduces time spent on corrective work. Practical usability for workshop workflows Designed as an analogue marking instrument, the flat rule excels where firm, repeatable scribing is required on metal and other engineering materials. The low profile allows access close to edges and in shallow recesses, while the visible scale simplifies rapid transfer of measurements. In production and assembly contexts the tool supports efficient preparation of parts and fixtures by delivering a straightforward, durable method for transferring dimensions, avoiding the complexity of electronic systems when mechanical reliability is preferred. Built for durability and consistent performance Constructed from stainless steel with a matt-chromed scale and a heat-treated scribing edge, the flat rule is made to withstand workshop environments and regular use. The analogue design keeps maintenance simple and parts readily serviceable; the hardened edge reduces the need for frequent replacement, thereby lowering lifetime operating costs. As part of the Metav IndustryLine, this marking instrument reflects a focus on accessible precision for industrial and craft applications, bringing reliable layout accuracy to the bench or production line. Choose the Metav IndustryLine marking gauge for dependable scribing accuracy and contact Metav Werkzeuge for personalised advice or immediate dispatch from our Emmerich stock Technical Data SKU: M201.194 GTIN: 4054469101071 Tariff number: 90173000 ECLASS: 21170302 Label: Streichmaß 200mm, INOX flache Ausführung, Anreißkante gehärtet Facts Measuring range: 0–200 mm Scale: millimetre Analogue instrument: yes Special features Material: stainless steel (INOX) Scale finish: matt-chromed Scribing edge: hardened Execution: flat version Category: marking tool (Anreisszeuge) FAQ What materials can be scribed with this marking gauge? The M201.194 marking gauge is made of stainless steel with a hardened scribing edge and is suitable for scribing on typical workshop materials used in metalworking and general fabrication. Is the millimetre scale suitable for fine layout accuracy? Yes, the matt-chromed millimetre scale on this flat rule gives a clear analogue reference that supports precise layout work within the 0–200 mm measuring range. How does the hardened scribing edge benefit everyday use? A hardened scribing edge on the M201.194 reduces wear from repeated marking, ensuring consistent mark quality and longer service life compared with non-hardened edges. Is this tool appropriate for both bench and on‑machine layout tasks? The flat profile and robust construction make the instrument well suited to bench work and many on‑machine layout situations where a low-profile scribing reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scratch Gauge Hardened Scribing Edge With mm Scale - Metav IndustryLine
The combination of a hardened scribing edge, a clear mm scale and robust steel construction ensures precise layout and durable performance; order the marking gauge directly via Metav Werkzeuge or consult the team for application advice. Marking gauge M201.191 — 200 mm hardened scribing edge (Metav IndustryLine) The Marking gauge M201.191 is an analogue workshop layout tool designed for accurate scribing and transfer marking across a 200 mm range, ideal for general metal and woodworking tasks. Hardened scribing edge for lasting precision Matt chrome scale with mm graduation 200 mm measuring range for workshop tasks Robust mild steel construction Precision layout that reduces rework As a dedicated layout instrument, this gauge delivers repeatable line placement thanks to its hardened scribing edge, which resists wear and preserves edge geometry over prolonged use. The clear mm graduation on a matt chrome scale supports exact positioning, making the tool suitable for both coarse and fine layout tasks. By reducing uncertainty at the marking stage, the tool contributes directly to fewer correction cycles and faster parts throughput. Built for workshop endurance and simple handling Constructed from mild steel with a matt-chrome finished scale and a heat-treated scribing contact, the device is balanced for everyday use while offering resilience under shop conditions. The solid build provides tactile feedback during layout without excessive flex, and the analogue design keeps operation straightforward: set, lock and scribe. This simplicity supports efficient workflows in production and repair environments where robust, low-maintenance tools are preferred. Practical range and application focus With a measuring span of 200 mm, the gauge sits in the Standard category of layout tools, offering the optimal compromise between reach and rigidity for general machine- and metalworking applications. The configuration is well suited for marking edges, aligning drill positions and transferring reference lines on components and stock. The instrument’s specification favours repeatable manual processes rather than automated measurement, making it a pragmatic choice for workshops seeking reliable mechanical layout aids. Contact Metav Werkzeuge today to request a specification sheet or to reserve the Metav IndustryLine marking gauge M201.191 for your workshop: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M201.191 GTIN: 4054469101040 ECLASS: 21170302 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Instrument type: analogue marking gauge Scale: mm graduation Category: Anreisszeuge (layout tools) Special features Material: mild steel Scale finish: matt chrome-plated Scribing edge: hardened Brand: Metav IndustryLine FAQ What materials can be marked with this gauge? The marking gauge M201.191 is made from mild steel with a hardened scribing edge and is suitable for marking on metals and common workshop materials where a durable scribe is required. How accurate is the mm scale on the instrument? The mm graduation on the Metav IndustryLine marking gauge provides clear, analogue reference lines for layout work; it is intended for precise manual marking rather than dimensional inspection to micrometric tolerances. Is the scribing edge replaceable or serviceable? The hardened scribing edge is designed for longevity; normal maintenance consists of keeping the edge free from burrs and corrosion. For extended service life, the edge may be professionally reconditioned if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scratch Gauge With Marking Holes, 5–160mm Range, 1mm Pitch - Metav IndustryLine
Take advantage of a durable, low-weight design combined with precise, repeatable scribing: aluminium construction with a black anodised finish and a fine 1 mm pitch ensure accurate layout over the full 200 mm length. Order the marking gauge directly via Metav Werkzeuge or ask our consultants if needed. Marking Gauge M203.044 — aluminium scribing gauge, 200 mm, with scribing holes (Metav IndustryLine) The Marking Gauge M203.044 is an aluminium scribing gauge with an integrated stop and an array of scribing holes, designed for precise and repeatable layout work across metal and workshop applications. *Aluminium black anodised finish *200 mm overall length *Scribing holes 5–160 mm range *Fine 1 mm pitch for repeatable marks Precise scribing for reproducible layout work This scribing gauge delivers repeatable marks thanks to its fine 1 mm pitch adjustment and clear hole spacing from 5 to 160 mm. The engraved pitch allows for incremental, measurable steps when transferring dimensions, reducing reliance on manual estimation and minimising layout errors. As a result, time spent reworking parts is reduced and first-pass quality improves—an important efficiency gain in small-batch production and maintenance tasks. The robust indexing of the scale ensures consistent marks even under frequent use, supporting reliable production flows. Built to withstand the workshop environment Constructed from black anodised aluminium, the tool combines low weight (approx. 0.2 kg) with good corrosion resistance and a tactile, non-reflective surface that eases reading in bright lighting. The integrated stop (100 x 30 mm) provides a stable reference face for straight scribing along edges or templates, improving angle control and alignment. The lightweight design keeps operator fatigue low during extended marking tasks while preserving sufficient stiffness for accurate lines on both metal and timber substrates. Flexible marking options for a range of components The array of scribing holes (spacing covering 5–160 mm) enables rapid transfer of repeat distances and the creation of parallel scribed lines without recalibrating the tool. Combined with the 200 mm overall reach, this gauge suits small to medium components where controlled offsets are required, such as flanges, brackets and templates. The clear, graduated pitch simplifies repositioning and lowers the cognitive load when performing repetitive layout operations, improving throughput on both workshop benches and assembly stations. Simple integration into quality-oriented workflows As a compact layout instrument, this gauge complements measurement and inspection equipment without the need for complex setup. The design supports quick hand-held operation and can be used alongside calipers, squares and templates to establish datum lines before machining or welding. Backing from Metav IndustryLine ensures availability and compatibility with common workshop routines, and the product specification (including SKU M203.044 and GTIN 4054469183329) enables straightforward inventory management and traceability for procurement records. For consistent and efficient marking results, consult Metav Werkzeuge’s product specialists in Emmerich for tailored advice and fast delivery options — Metav Werkzeuge supports specification and procurement for industrial workshops Technical Data Article number: M203.044 GTIN: 4054469183329 Material: Aluminium, black anodised Overall length: 200 mm Weight: 0.2 kg Pitch: 1 mm Stop dimension: 100 x 30 mm Scribing holes range: 5–160 mm Facts Length: 200 mm Weight: 0.2 kg Hole range: 5–160 mm Pitch increments: 1 mm GTIN: 4054469183329 Special features Integrated stop for edge reference Black anodised finish for wear resistance Lightweight aluminium construction Array of scribing holes for repeat distances FAQ What materials is this scribing gauge suitable for? The marking gauge M203.044 is made from aluminium with a black anodised finish and is suitable for layout work on metals and common workshop materials where a durable, low-weight gauge is required. How precise are the pitch increments on the tool? The gauge features a 1 mm pitch, enabling reproducible incremental marking and simple transfer of measured steps without guesswork. Can the tool produce parallel lines or repeat distances quickly? Yes, the integrated array of scribing holes (5–160 mm range) allows the user to transfer repeat distances and create parallel scribed lines efficiently. Is the product easy to store and identify in inventory? The item is identified by SKU M203.044 and GTIN 4054469183329, which supports straightforward ordering and stock control in workshop inventories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scriber Gauge Aluminium, 0.05mm Graduation, Hardened Scoring Edge, Black Anodised, Supplied in Case - Metav IndustryLine
Take advantage of a lightweight, anodised aluminium construction combined with a hardened marking edge and a fine 0.05 mm nominal tolerance for precise, repeatable layout work; order directly via Metav Werkzeuge or contact the consultants for application advice. Marking Gauge AL 200 mm (M201.191.AL) – Anodised aluminium, 0.05 mm tolerance A compact, metric marking gauge, the Marking Gauge AL 200 mm provides reliable scribing and layout capability for general workshop and metalworking tasks with a hardened scribing edge and millimetre scale Anodised aluminium body, hardened scribing edge Metric mm scale for precise layout 0.05 mm nominal tolerance Supplied in protective transport case Precision layout for everyday workshop tasks This marking gauge delivers a measured balance between reach and stiffness: the 0–200 mm range places it squarely in the standard measuring category favoured in machine and metal workshops. The device is specified with a 0.05 mm nominal tolerance, making it suitable for routine layout where clear, repeatable scribed lines are required. The integrated metric scale simplifies direct reading and alignment, reducing setup time on jigs and workpieces and supporting efficient process flow in small-series production. Robust materials that support repeatable scribing Constructed from anodised aluminium, the tool remains lightweight while resisting corrosion and abrasion; this aids manoeuvrability at the bench and reduces operator fatigue during repeated use. The hardened marking edge is specified to withstand repeated contact with scribing surfaces, ensuring consistent line definition over time. Supplied in a protective transport case, the instrument is protected in transit and storage, preserving calibration and edge integrity for reliable service life. Clear handling and workplace benefits The analogue mm-scale and straightforward clamping mechanism enable fast adjustments without electronics, ideal for harsh shop-floor environments or where simplicity and immediacy matter. As a non-digital layout instrument it requires no batteries and remains serviceable with minimal maintenance. The combination of low weight and solid profile yields repeatable results when marking out components, fixtures or assemblies, supporting quality assurance routines and reducing downstream fitting work. Contact Metav Werkzeuge today for tailored advice on using the Marking Gauge AL 200 mm and to arrange supply from our Emmerich facility. Technical data Article number / SKU: M201.191.AL GTIN: 4054469164533 Category: Marking tools (Anreisszeuge) Description: Marking gauge AL 200 mm, accuracy 0.05 mm, anodised black aluminium Facts Measuring range: 0–200 mm Nominal tolerance / accuracy: 0.05 mm Weight: 0.5 kg Tariff number: 90173000 Special features Material: aluminium alloy Finish: black anodised Marking edge: hardened Scale: mm-scale (metric) Operation: analogue Delivery: protective transport case FAQ What measuring range does this marking gauge cover? The marking gauge covers a measuring range of 0–200 mm; the Marking Gauge AL 200 mm from Metav IndustryLine is therefore classified in the standard workshop range. Is the scribing edge durable for repeated use on metal? Yes, the tool features a hardened marking edge which ensures the Marking Gauge AL 200 mm maintains clear scribed lines during repeated layout tasks. Does the product come with a protective case? The instrument is supplied in a protective transport case, so the Marking Gauge AL 200 mm is delivered ready for safe storage and transit. Who supplies this marking gauge and where can technical advice be obtained? This marking gauge is supplied by Metav IndustryLine; for technical advice and application guidance contact Metav Werkzeuge GmbH (see manufacturer details below) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Marking Gauge, Flat Stainless Steel Body, Hardened Scriber Edge, mm Scale - Metav IndustryLine
Take advantage of a stainless steel, flat construction and a hardened scribing edge for repeatable, industrial-grade layout work; the 250 mm measuring range provides the workshop reach needed for general metalworking tasks. Order the marking gauge directly via Metav Werkzeuge or consult our advisors for technical guidance. Marking gauge M201.195 — INOX stainless steel, 250 mm, hardened scribing edge (Metav IndustryLine) The Marking gauge M201.195 is a flat stainless steel layout tool designed for precise scribing and layout work in metal workshops and fabrication environments. Flat INOX stainless steel construction Hardened scribing edge for long life Clear matt‑chromed mm scale 250 mm measuring range for standard workshop use Precision layout that speeds production The M201.195 is engineered for consistent, repeatable marking, reducing setup time and rework across production runs. Its stainless steel body resists distortion and maintains straightness in daily workshop use, while the matt‑chromed mm scale remains readable under varied lighting. The hardened scribing edge holds its profile so that each layout line stays sharp even after prolonged use — a direct benefit for machining, welding preparation and part alignment where dimensional fidelity matters. This rational focus on durability and readability translates into measurable time savings at the layout bench. Built for workshop versatility and user confidence Classified as a standard workshop gauge (measuring range up to 300 mm), this instrument balances reach and rigidity for everyday tasks. The flat design allows the tool to lie flush against workpieces, improving stability when drawing scribe lines along edges or across faces. As an analogue instrument with an mm scale, it provides immediate, no‑power operation and simple verification routines that suit the pace of production floors and toolrooms. The combination of these features supports reliable, low‑maintenance operation and straightforward training for shop personnel. Durable finish and low-maintenance service life Surface treatments and construction were chosen to reduce lifecycle costs: INOX construction minimises corrosion; the matt‑chromed scale improves contrast and reduces glare during measurement; and the hardened scribing tip prolongs service intervals. Together these attributes offer a pragmatic advantage for workshops seeking tools that deliver steady performance without frequent replacement. For buyers seeking assurance of supply and pragmatic service, Metav IndustryLine pairs this product with a European distribution and stock operation that helps maintain uninterrupted workshop throughput. Contact Metav Werkzeuge for a technical consultation on the M201.195 marking gauge and arrange fast delivery from our Emmerich warehouse. Technical Data Article number: M201.195 GTIN: 4054469101088 ECLASS: 21170302 Category: Marking tools / Anreisszeuge Facts Measuring range: 0–250 mm Scale graduation: millimetre (mm) Tariff code: 90173000 Special features Material: INOX stainless steel Scale: matt‑chromed with mm graduation Scribing edge: hardened Design: flat construction for stable contact Operation: analogue, no power required FAQ What applications is this marking gauge suited to? The M201.195 marking gauge by Metav IndustryLine is designed for layout and scribing tasks in metalworking, fabrication and general workshop use where a 250 mm range and a stable, flat contact surface are required. Is the scribing edge durable enough for frequent workshop use? Yes — the scribing edge on the M201.195 is hardened to retain its profile during repeated marking tasks, ensuring sustained line quality and reduced need for re‑profiling. How is the scale finished and how does that help readability? The scale is matt‑chromed with millimetre graduation; this finish reduces reflections and improves contrast, making readings and scribing marks easier to see under typical workshop lighting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Scriber Hardened Scribing Edge, Matt Chrome Scale, 0.6kg - Metav IndustryLine
Precise layout is ensured by the hardened scribing edge together with a matt‑chrome scale, delivering repeatable, glare‑free marking over a 250 mm working range; robust mild steel construction adds long service life. Order the marking gauge directly via Metav Werkzeuge or ask our consultants if needed. Marking Gauge M201.192 — 250 mm with hardened scribing edge, matt‑chrome scale (Metav IndustryLine) The Marking Gauge M201.192 is a workshop marking gauge designed for accurate scribing and layout work on components, providing a durable scribing edge and a clear millimetre scale for standard metalworking and fabrication tasks. Hardened scribing edge for durable layout Matt‑chrome scale for glare‑free reading 250 mm working range for standard tasks Robust mild‑steel construction Consistent, precision marking for everyday workshop tasks The gauge is built around a hardened scribing edge, which keeps a sharp layout line under repetitive use and reduces rework caused by dull points. The matt‑chrome scale and millimetre graduation enable quick visual alignment and minimise parallax in well‑lit and brightly reflective environments. Designed for the common workshop spectrum, this tool sits in the standard workshop range (100–300 mm) and offers the best compromise between reach and handling for everyday layout on assemblies and parts. The result is clear, repeatable scribed lines that support downstream processes such as machining, welding and assembly. Practical handling and durable construction for reliable results A compact, straightforward design keeps the instrument easy to set and use on bench or layout tables, while the mild‑steel body provides structural stability that resists deformation during routine work. The analogue scale with millimetre reading simplifies quick checks and reduces setup time where digital readouts are unnecessary. Because the working length is 250 mm, the marking gauge is particularly suited to standard components and fixtures where a single‑handed, rigid instrument improves throughput and operator confidence. Maintenance is minimal: the robust edge and matt finish reduce the need for frequent adjustments or protective measures. Workshop supply with trusted distribution and service Delivered under the Metav IndustryLine, this marking gauge benefits from Metav’s quality‑filter approach in Emmerich, which ensures consistent batch checks and dependable availability across the European market. For procurement teams the combination of durability and simple functionality reduces inventory turnover while supporting predictable production flow. For workshop managers the reliable scale and hardened edge translate into fewer layout errors and cleaner handoffs to machining or finishing steps, supporting measurable gains in process efficiency. Contact Metav Werkzeuge for tailored advice on the Marking Gauge M201.192 and reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.192 GTIN: 4054469101057 Tariff number: 90173000 ECLASS: 21170302 Core measurements Measuring range: 0–250 mm Scale graduation: millimetre Working length: 250 mm Special features Material: mild steel Scale finish: matt chrome Scribing edge: hardened Analog instrument Category: marking gauge (Anreisszeuge) FAQ What is the measuring range of the gauge? The Marking Gauge M201.192 has a measuring range of 0–250 mm, suited to standard workshop layout tasks. Is the scribing edge hardened for long life? Yes, the marking gauge features a hardened scribing edge to maintain a sharp layout line through repeated use. What type of scale does the instrument use? The instrument is supplied with a millimetre scale in a matt‑chrome finish for glare‑free reading. Is this gauge suitable for metalworking layout? The design and materials make the Marking Gauge M201.192 appropriate for routine metalworking and fabrication marking tasks where a robust analogue gauge is preferred. Who supplies and guarantees the product? This item is supplied under the Metav IndustryLine; Metav Werkzeuge manages distribution and quality assurance for European customers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Scribing Gauge, 0.05mm Graduation, Hardened Scribing Edge, Black Anodised Aluminium, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise 0.05 mm graduations, a stiff 250 mm measuring range and robust aluminium construction for reliable workshop scribing; order the marking gauge directly via Metav Werkzeuge or consult our specialists for application advice. Marking Gauge AL 250 mm — Metav IndustryLine, 0.05 mm graduations, black anodised aluminium The Marking Gauge AL 250 mm is a purpose-built scribing instrument for accurate layout work in metalworking and general workshop use, combining a clear mm scale with a hardened scribing edge for repeatable marks. 250 mm measuring range 0.05 mm graduation Hardened scribing edge Black anodised aluminium body Precision where it matters: accurate scribing for workshop layouts The device delivers a 0.05 mm graduation on a clear mm scale, allowing fine incremental control when transferring dimensions or marking cut lines. The scribing edge is hardened, which preserves a crisp mark even after repeated use on tougher surfaces; this reduces rework and supports efficient downstream processes. Built from an aluminium alloy, the body keeps mass low while providing sufficient rigidity for consistent results across the full 250 mm measuring range, a length classified in the standard category for general machine and metalworking tasks. Ease of use and durability that support productivity A compact, analogue format with straightforward scale-reading minimises set-up time and avoids battery dependency, making the tool ideal for busy shop floors. The black anodised finish increases corrosion resistance and reduces visual glare on the scale, while the light weight supports single‑handed handling. The combination of durable materials and hardened contact ensures long service life and stable performance under regular workshop conditions, helping to keep layout cycles short and predictable. Practical benefits for everyday workshop scenarios Designed for marking operations, the scribing instrument creates clear reference lines for sawing, drilling and machining operations. The 250 mm measuring range covers most routine tasks in the workshop, offering a practical balance between reach and stiffness. Supplied for transport protection in a box, the gauge is ready for immediate use at the bench or on site, and its straightforward functionality integrates seamlessly into standard measurement and layout workflows. For tailored advice on suitability for specific materials or to arrange immediate supply, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for direct assistance and order information. Technical Data Article number: M201.192.AL SKU: M201.192.AL GTIN: 4054469164540 Category: Scribing instruments / Marking tools Facts Measuring range: 0–250 mm Maximum range classification: Standard (100–300 mm) Graduation / resolution: 0.05 mm Weight: 0.5 kg Format: Analog Special features Material: aluminium alloy Scribing edge: hardened Finish: black anodised Scale: mm scaling Delivery: supplied in a transport box FAQ What is the primary use of this marking gauge? The marking gauge is intended for accurate scribing and layout work in metalworking and general workshop tasks; the aluminium body and hardened edge make it suitable for repeated marking on common workshop materials. How precise are the graduations on the instrument? Graduations are 0.05 mm, enabling fine visual subdivision for precise layout; this resolution supports reliable transfer of dimensions to cutting or machining operations. Is the marking edge durable enough for steel surfaces? Yes, the hardened scribing edge is designed to withstand repeated contact with metal surfaces, retaining a sharp mark for consistent results. Does the gauge require calibration or special adjustment? The analogue gauge is ready for use out of the box; its mechanical design offers stable repeatability for layout tasks without electronic calibration requirements. How is the tool delivered and protected during transport? The instrument is supplied in a transport box to protect the gauge and the scribing edge during storage and shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Scratch Gauge With Digital Angle Indicator, Dual Display And Hold, Aluminium Base - Metav IndustryLine
Take advantage of the combination of fast, repeatable layout and precise angular setting delivered by the aluminium construction and digital readout; order the Digital marking gauge with digital protractor M240.154 directly via Metav Werkzeuge or ask the consultants for application-specific advice. Digital marking gauge with digital protractor M240.154 — 300 mm beam, aluminium base (Metav IndustryLine) The Digital marking gauge with digital protractor M240.154 is a workshop-grade marking tool that combines a 300 mm beam and aluminium base plate for accurate scribing and angular layout in metalwork and woodworking applications. 300 mm beam with aluminium base Dual digital display with HOLD function Resolution 0.01 mm (0.0005 in) Compact 0.6 kg workshop instrument Faster, more reliable layout with clear digital feedback The M240.154 places clear digital measurement at the centre of layout work, turning manual marking tasks into reproducible operations. With a resolution of 0.01 mm (0.0005 in) and a dedicated angle resolution of 0.05°, the instrument reduces interpretation errors that commonly arise from analogue scales. The dual digital display and HOLD function allow readings to be taken in constrained positions and then viewed comfortably, which shortens setup time and minimises rework. For standard workshop tasks the device brings measurable efficiency gains, particularly where repeated parallel scribing or precise angular transfers are required. Robust, light construction designed for workshop use Built around an aluminium beam and base plate, this marking instrument balances stiffness and portability. The 300 mm measuring range classifies it within the standard workshop category, offering the typical reach used across machine shops and fabrication benches while preserving rigidity for repeatable scribing. At approximately 0.6 kg, the unit is easy to handle and manoeuvre on jigs or workpieces without sacrificing contact stability. The light alloy construction also means reduced susceptibility to corrosion compared with untreated ferrous parts, increasing service life in a busy workshop environment. Practical benefits that reduce scrap and speed production The digital readout improves decision-making on the shop floor: faster verification of layout dimensions, straightforward angle transfers and a reduced number of manual measurements. The combination of digital accuracy and a stable base supports consistent results when marking plates, bars or housings for secondary operations. For production-oriented environments, the device helps to cut the time spent on manual re-measurement and to reduce material waste, delivering a clear cost‑efficiency argument for toolroom and maintenance teams. Technical staff and fitters gain a dependable layout instrument that integrates readily into existing measurement routines. For precision layout and angle marking with the Metav IndustryLine M240.154, contact Metav Werkzeuge in Emmerich to request product information or application guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M240.154 GTIN: 4054469164304 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm (0.0005 in) Angle resolution: 0.05° Weight: 0.6 kg eClass: 21170302 Tariff number: 90173000 Special features Material: aluminium beam and base plate Digital display: dual display with HOLD function Label: Digital-Streichmaß mit Digital-Gradmesser, 300 mm Schiene und Grundplatte aus Aluminium FAQ What measuring range does this instrument cover? The M240.154 covers a measuring range of 0–300 mm, which places it in the standard workshop category for general machine‑shop layout tasks. How accurate is the instrument for fine marking? Measured values are shown at a resolution of 0.01 mm (0.0005 in) and angular adjustments to 0.05°, making the device suitable for precise scribing and angle transfers. Can the display be read when working in tight positions? Yes, the dual digital display and HOLD function on the M240.154 allow readings to be captured in confined spaces and reviewed afterwards for convenience. Is the instrument robust enough for everyday workshop use? The beam and base plate are made from aluminium, offering a good balance of stiffness, corrosion resistance and lightness for regular shop handling. Which trades and tasks is this marking gauge intended for? The device is aimed at machinists, toolmakers and maintenance teams for tasks such as panel layout, angular transfers and repeat scribing on metal and wood components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Scriber Caliper With 50x40mm Scribing Plate And Adjustable Scriber Needle, 0.01mm Resolution - Metav IndustryLine
Take advantage of a digital display with 0.01 mm resolution, a robust scribing plate 50 x 40 mm and a corrosion‑resistant stainless steel body for dependable layout work and repeatable marking; order directly via Metav Werkzeuge or consult our technical advisors for integration into existing workshop procedures. Digital scribing caliper 300 mm (scribing plate 50 x 40 mm) — Metav IndustryLine The Digital scribing caliper 300 mm is a precision layout tool for workshop marking and fast dimensional checks, optimised for metalworking and general fabrication tasks. Digital display with ON/OFF, ZERO, UNIT, HOLD Scribing plate 50 x 40 mm for repeatable scribing Adjustable scribing pin 5 x 60 mm Stainless steel body with metal housing Precise, measurable results for everyday workshop use The caliper combines a digital display with a standard 0.01 mm resolution and a measuring span of 0–300 mm, classifying it as a standard‑range instrument ideal for machine shops and metal fabrication. The electronic readout simplifies transfer between metric and imperial units, while clearly marked controls (ON/OFF, ZERO, UNIT, HOLD) reduce setting errors. These measurable specifications support quality control routines and make the device suitable for repetitive layout tasks where reproducibility and clear numeric feedback are essential. Faster scribing and repeatable marking on components A substantial scribing plate 50 x 40 mm and an adjustable scribing pin 5 x 60 mm turn dimensional readings into immediate layout marks without additional tools. The plate provides a stable datum for edge contact, helping to produce consistent scribed lines across batches, while the movable pin allows fine alignment for different workpiece geometries. This combination reduces setup time and minimises handling steps during fixture preparation or pre‑machining checks, improving throughput with minimal compromise to accuracy. Robust build for workshop conditions and simple handling Constructed from stainless steel with a metal housing, the instrument tolerates the rigours of a busy workshop environment and resists corrosion from cutting fluids and general use. A measuring rod 15 x 6 mm is included to aid rigidity in longer reaches, and the overall unit weight of 0.6 kg offers a balance between solidity and ease of single‑hand operation. Power is supplied by a 3 V source and the caliper provides an RB 5 data output for optional integration into data logging systems or digital inspection workflows. How this tool fits into quality processes By delivering direct numeric results and a stable scribing interface, the device supports traceable layout practices and efficient setup verification. The clear readout and straightforward controls help reduce human error during transfer measurements, while the solid construction ensures repeatability over time. For workshops standardising measurement tasks, the caliper acts as a reliable intermediary between layout and machining stages, improving conformity checks without adding complexity. Contact Metav Werkzeuge for specific technical advice or to arrange a tailored quotation for the Metav IndustryLine digital scribing caliper M240.153 and its integration into existing measurement routines. Technical data Article number: M240.153 GTIN: 4054469178363 Material: stainless steel with metal housing Weight: 0.6 kg Data output: RB 5 Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Scribing plate size: 50 x 40 mm Scribing pin: 5 x 60 mm Measuring rod: 15 x 6 mm Power: 3 V Tariff number: 90173000 Special features Digital display with ON/OFF, ZERO, UNIT, HOLD Adjustable scribing pin Included measuring rod 15 x 6 mm Corrosion‑resistant stainless steel construction RB 5 data output for digital integration FAQ What is the measuring range and resolution of this caliper? The metrology span is 0–300 mm with a display resolution of 0.01 mm (0.0005 in) on the Digital scribing caliper 300 mm. Can the scribing pin be adjusted for different workpiece geometries? Yes, the adjustable scribing pin (5 x 60 mm) can be positioned to suit various edge conditions and marking orientations. Is the caliper suitable for routine workshop marking and layout? The stainless steel construction and robust scribing plate make the instrument well suited to workshop layout, fixture set‑up and repeatable marking tasks. Does the caliper provide a data output for documentation? The tool features an RB 5 data output, enabling connection to data loggers or inspection systems for digital documentation. Which accessories are included with delivery? Delivery includes a solid measuring rod (15 x 6 mm) and the integrated scribing plate 50 x 40 mm as standard with the unit M240.153. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Marking Gauge Flat Stainless Steel, Hardened Scriber Edge, mm Scale, 0.7 kg - Metav IndustryLine
Take advantage of a corrosion‑resistant INOX construction, a hardened scriber edge and a clear mm scale (0–300 mm) for dependable, repeatable marking; order directly via Metav Werkzeuge or consult our specialists for application advice. Marking Gauge M201.196 — 300 mm INOX flat design, hardened scriber edge (Metav IndustryLine) A Marking Gauge M201.196 designed for workshop layout and precision marking, featuring a flat stainless profile and an easy‑to‑read millimetre scale for routine metalworking and fabrication tasks Stainless steel flat design, corrosion-resistant Hardened scriber edge for durable marking Metric mm scale up to 300 mm for precise layouts Compact, workshop-ready marking gauge Precision and durability for routine marking The M201.196 marking gauge delivers consistent layout control across the standard workshop range by combining a 300 mm measuring span with a clearly engraved mm scale. The hardened scriber edge maintains a sharp contact point, reducing chatter and allowing clean scribed lines on workpieces; this increases first‑pass accuracy and shortens setup time. The analogue design avoids electronic failure modes and supports rapid, repeatable marking operations in production or prototyping environments, making it a practical tool for repeatable workflows. Flat stainless profile that supports accurate alignment A flat profile in stainless steel provides a rigid reference plane that resists torsion during scribing, so transfer lines stay true over the full measuring length. The scale is matt‑chrome finished to cut glare and improve contrast under workshop lighting, which aids quick visual alignment and reduces inspection time. Constructed from INOX, the layout tool resists corrosion in everyday shop conditions, preserving the datum surface and the integrity of the marking edge for longer service intervals. Practical advantages that speed up workshop processes Simple mechanical operation and clear graduations enable faster marking sequences compared with improvised gauges or worn templates. The hardened scriber edge reduces dressing frequency and maintains a reliable contact point, while the flat form factor helps with stable, single‑handed handling during repetitive tasks. This combination of durability and ease of use supports throughput improvements on layout benches and aids quality control by producing reproducible scribe lines for cutting, drilling and assembly operations. Low maintenance and a long service life Maintenance is straightforward: keep the datum surfaces clean and protect the hardened scriber edge from heavy impact to preserve its performance. The stainless construction requires minimal corrosion protection, which reduces upkeep costs and downtime. Metav’s approach to precision tools emphasises dependable value and accessible quality, so this marking gauge integrates into standard workshop fleets without adding complexity to inventory or training. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine marking gauge M201.196 can improve workshop layout accuracy and to request tailored technical guidance Technical data SKU: M201.196 GTIN: 4054469101095 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Key dimensions & performance Measuring range: 0–300 mm Scale type: metric (mm) Instrument type: analogue marking gauge Features & materials Material: stainless steel (INOX) Scale finish: matt chrome‑plated Hardened scriber edge for wear resistance Flat profile for stable reference plane Category: marking tools (layout/marking gauge) FAQ What measuring range does the tool cover? The marking gauge covers a measuring range of 0–300 mm, specified for layout and scribing tasks. What material is used for the body and scale? The body is made from stainless steel (INOX) and the scale is matt chrome‑plated; the scriber edge is hardened for durability. Is the scriber edge suitable for repeated workshop use? Yes, the hardened scriber edge is designed to withstand repeated marking and maintain a consistent contact point. Which applications is this tool intended for? The gauge is intended for marking out and layout work in metalworking and general workshop environments where reliable scribed lines are required. Is the scale metric only? The instrument features a metric mm scale, marked for millimetre reading up to 300 mm. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Marking Gauge Hardened Scribing Edge, Matt Chrome Scale - Metav IndustryLine
Take advantage of a simple, robust layout tool that combines a hardened scribing edge, a clear millimetre scale and a practical 300 mm measuring range for consistent workshop marking. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and application advice. Metav IndustryLine Marking Gauge M201.193 — 300 mm with hardened scribing edge A durable marking gauge designed for precise scribing and layout work on standard metalworking and workshop tasks. Hardened scribing edge for repeatable marks Millimetre scale for accurate layout control Robust normal-steel construction Engineered for workshop and metalworking use Precision where layout matters The marking gauge delivers a straightforward but reliable tool for transferring dimensions and scribing lines across parts. The hardened scribing edge ensures long-term durability and repeatable crisp marks, reducing the need for rework and saving time in production setups. With a visible millimetre scale, measurements are clear and directly comparable to drawing data, which supports faster, more reproducible layout processes and improves downstream machining accuracy. Practical design for everyday workshop use Built from normal steel with a matt chrome-plated scale, the construction balances stiffness and handling for routine shop tasks. The 0–300 mm measuring range places this gauge in the standard class, offering the best compromise between reach and rigidity for general machine‑shop and metal‑fabrication work. Its mechanical design keeps operation intuitive: set the marking distance, lock it, and run the hardened edge along the component for a clean scribe line that guides cutting, drilling or assembly. Fewer adjustments, more reliable results A simple, robust layout tool reduces set-up time and human error. The clear scale and hardened edge minimise visual ambiguity and wear, meaning fewer interim checks and consistent quality across repetitive operations. For teams focused on throughput, this instrument supports efficient workflows by ensuring that each mark is uniform and durable enough to survive handling before machining, inspection or finishing. Contact Metav Werkzeuge for tailored recommendations on integrating the Metav IndustryLine marking gauge into production workflows or to request associated accessories and replacement parts through our consultants at Metav Werkzeuge. Technical Data Article number: M201.193 GTIN: 4054469101064 Category: Marking tools (Anreisszeuge) Facts Measuring range: 0–300 mm Tariff number: 90173000 Analogue tool Special features Material: normal steel Scale: matt chrome-plated millimetre scale Hardened scribing/marking edge Brand: Metav IndustryLine Mechanical layout tool for scribing and marking FAQ What is the measuring range of this marking gauge? The Metav IndustryLine marking gauge M201.193 provides a measuring range of 0–300 mm, classifying it in the standard range suitable for most workshop tasks. Is the scribing edge hardened for longevity? Yes, the marking gauge features a hardened scribing edge, which gives repeatable, sharp marks and improved wear resistance for routine workshop use. What material is the gauge made from? The tool is manufactured from normal steel with a matt chrome-plated millimetre scale, combining durability with clear scale readability. Is the scale metric? The marking gauge is equipped with a millimetre scale for direct metric layout and straightforward comparison with technical drawings. Which applications suit this marking gauge best? This mechanical marking gauge is intended for general metalworking and workshop layout tasks, where a robust, repeatable scribe and a 300 mm reach are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Marking Gauge With Hardened Scriber Edge, 0.05mm Graduation, Anodised Black Aluminium, Supplied In Case - Metav IndustryLine
Reliable layout lines and long service life result from the combination of a 0.05 mm vernier, a hardened scribing edge and a black anodised aluminium body; order the marking gauge directly via Metav Werkzeuge or consult our advisors for technical guidance. Marking Gauge AL 300 mm – analogue vernier with 0.05 mm graduation by Metav IndustryLine The Marking Gauge AL 300 mm is a workshop-grade layout tool for precise scribing and repeatable edge marking across sheet and component work. 300 mm measuring range 0.05 mm vernier graduation Hardened scribing edge for longevity Black anodised aluminium finish Precision where it matters: accurate layout and readable vernier A mechanical vernier that reads to 0.05 mm delivers an industry-standard level of precision for routine layout tasks. In practice this means clearer, more reliable scribe lines on metal and wood, reducing downstream rework. The tool’s measuring span of 300 mm places it in the standard class of calipers and marking gauges used across machine and metal workshops, offering the best balance of reach and rigidity for everyday tasks. The vernier system keeps readouts simple and maintenance minimal, while the mm scale ensures compatibility with metric workflows. Built to withstand workshop demands Constructed from aluminium alloy with a black anodised surface, the gauge pairs light weight with robust corrosion resistance. The integrated hardened scribing edge is made for repeat use and preserves a sharp contact line even under frequent handling. Despite a compact profile the device remains substantial in the hand at 0.7 kg, offering stable contact when tracing long layout lines. These material choices reduce wear and help maintain consistent marking quality over time. Practical handling and secure transport for daily use Designed with workshop logistics in mind, this analogue marking gauge ships in a protective case suitable for transport, safeguarding the scribing edge and the scale from knocks. The simple mechanical lock and clear mm scale make it straightforward to set and transfer dimensions, so layout operations proceed without unnecessary adjustments. As an analogue instrument with a 0.05 mm graduation, it aligns with standard measuring practice and is ideal for machinists, toolroom staff and maintenance teams who require a durable marking solution rather than an electronic instrument. For reliable workshop marking from the Metav IndustryLine range choose the Marking Gauge AL 300 mm; contact Metav Werkzeuge in Emmerich for specification support and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M201.193.AL GTIN: 4054469163253 Measuring range: 0–300 mm Weight: 0.7 kg Tariff number: 90173000 Facts Resolution / graduation: 0.05 mm Type: analogue vernier Finish: black anodised Material: aluminium alloy Special features Hardened scribing edge mm scale included Delivered in protective case for transport Suitable for general machine and metal workshop layout FAQ Is this gauge suitable for everyday workshop layout? The Marking Gauge AL 300 mm from Metav IndustryLine (SKU M201.193.AL) is designed for routine workshop marking and offers the reach and rigidity expected in machine and metal shops. How precise is the reading on the vernier? The analogue vernier provides a 0.05 mm graduation; the Marking Gauge AL 300 mm (Metav IndustryLine, M201.193.AL) therefore meets common industrial precision requirements for layout work. What materials and finish does the tool have? The body is an aluminium alloy with a black anodised finish and a hardened scribing edge; these characteristics are specified for the Marking Gauge AL 300 mm (M201.193.AL) to enhance durability. Does the gauge come with a protective case? Yes. The Marking Gauge AL 300 mm (Metav IndustryLine, SKU M201.193.AL) is delivered in a protective case suitable for transport to keep the scribing edge and scale secure. For which applications is this marking gauge intended? The gauge is intended for precise scribing and layout in workshops, toolrooms and general metalworking applications; the Marking Gauge AL 300 mm (M201.193.AL) is optimised for routine production and maintenance marking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Punch Caliper With 50x40mm Scriber Plate And Adjustable Scriber, 0.01mm Resolution, Stainless Steel - Metav IndustryLine
Take advantage of the combination of 0.01 mm digital resolution, a 500 mm measuring range and a robust stainless steel frame for dependable, repeatable marking and measurement on medium-format components; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Digital marking caliper 500 mm, scribing plate 50 x 40 mm — Metav IndustryLine digital scriber with adjustable scribing needle Digital marking caliper 500 mm, scribing plate 50 x 40 mm designed for precise scribing and dimension checking in machine shops and jig production 500 mm measurement range 0.01 mm digital resolution Adjustable scribing needle Robust 15 x 6 mm measuring bar included Precision and repeatability for medium‑format work The caliper is classified as a medium‑range caliper (300–500 mm), which balances reach and rigidity for tasks such as fixture set‑up, housing inspection and medium‑sized assemblies. The 0.01 mm resolution on the digital readout delivers clear numeric feedback suitable for routine quality control, while the stainless construction minimises flex and ensures stable zeroing across the full travel. This combination reduces rework by improving first‑pass accuracy and speeds up routine marking operations by making measurements immediately readable. Clear marking and durable construction for daily workshop use Built with a stainless steel frame and a metal display housing, the scriber is engineered for workshop conditions where robustness matters. The integrated scribing plate (50 x 40 mm) and the movable scribing needle (5 x 60 mm) allow consistent, repeatable score lines on parts; the adjustable needle means different needle positions can be used without swapping tools. The instrument arrives with a solid 15 x 6 mm measuring bar and is supplied in a protective case for secure transport and storage, supporting safe handling between job sites or workstations. Efficient data handling and straightforward operation The digital readout is equipped with ON/OFF, ZERO, UNIT and HOLD functions to simplify measurement routines and reduce transcription errors. The device runs on a 3 V supply and includes an RB 5 data output for connection to compatible data loggers or CNC interfaces where traceable electronic capture is required. These features streamline inspection workflows and make the tool a practical choice for production environments that value speed and traceability over purely analogue methods. Contact Metav Werkzeuge for a bespoke quotation or technical clarification on the Metav IndustryLine marking caliper and to confirm delivery options from our Emmerich site Technical Data Article number: M240.153.1 GTIN: 4054469178387 Weight: 0.6 kg Material: stainless steel with metal housing Measurement range: 0–500 mm Resolution: 0.01 mm (0.0005 in) Power: 3 V Included accessory: solid measuring bar 15 x 6 mm Scribing plate: 50 x 40 mm Scribing needle: 5 x 60 mm Facts Measurement range: 0–500 mm Display resolution: 0.01 mm Weight: 0.6 kg Scribing needle dimensions: 5 x 60 mm Scribing plate dimensions: 50 x 40 mm Special features Digital display with ON/OFF, ZERO, UNIT, HOLD Adjustable/movable scribing needle RB 5 data output Supplied in transport case (plastic or wooden) Category: marking tools (Anreisszeuge) FAQ What makes this marking caliper suitable for workshop measurement tasks? The marking caliper combines a 500 mm measuring range with a 0.01 mm digital readout and a stiff stainless frame, providing reach and repeatability that suits fixture work, medium components and assembly checks; these attributes make the tool well matched to everyday workshop measurement tasks. Is the scribing needle adjustable and replaceable? Yes, the instrument features an adjustable scribing needle (5 x 60 mm) that can be positioned as required for different marking depths and geometries, and the needle can be serviced or replaced without changing the whole caliper. Can measurement data be exported from the caliper? Data export is available via the RB 5 output, allowing measured values to be recorded electronically when connected to compatible data acquisition systems or inspection software. Does the caliper include any accessories for handling or transport? The caliper is delivered with a solid 15 x 6 mm measuring bar and is supplied in a protective transport case to safeguard the tool during storage and movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ø 5x20 mm Scriber Needle High-Speed Steel - Metav IndustryLine
Compact, wear-resistant marking performance from a hardened tip and a slim shank ensures repeatable results in routine workshop marking; the HSS construction and ø 5 x 20 mm profile combine durability with easy mounting. Order the replacement part directly via Metav Werkzeuge or contact the consultants for application advice. Scribing Needle M240.151.A1 – HSS, ø 5 x 20 mm (Metav IndustryLine) A scribing needle M240.151.A1 designed as a hardened high-speed steel marking tip for reliable metal scribing and simple integration into compatible holders. Durable HSS marking tip Precise ø 5 x 20 mm shank For 240.151-compatible holders Marking accuracy that stays consistent The hardened HSS tip delivers a reliable edge geometry that maintains sharpness under frequent use, reducing the need for early replacement. This means clearer centre lines and reference marks on metal components, which supports reproducible setup and faster downstream processing. The compact ø 5 x 20 mm format keeps the mass low and the centre of gravity close to the holder, improving handling and minimising unintentional deflection during scribing. Robust design for everyday workshop use A solid shank diameter of 5 mm with a 20 mm engagement length provides a stable clamping zone and simple fitment into standard holders. The high-speed steel composition balances toughness and hardness for marking a range of ferrous materials while resisting chipping in normal shop conditions. The compact construction makes replacement straightforward, so production downtime is reduced and toolroom logistics remain efficient. Easy identification and traceability for parts management Small weight and clear identifiers simplify inventory handling: the article is listed under SKU M240.151.A1 and GTIN is available for procurement systems. The modest form factor keeps stores tidy and allows quick swaps on marking fixtures, supporting lean workshop routines. Documentation and image resources are provided for rapid verification before installation, helping to maintain process consistency. For reliable, workshop-grade marking choose Metav IndustryLine’s hardened HSS scribing needle and contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.151.A1 GTIN: 4061905053672 Label: Reißnadel für 240.151 Ø 5 x 20 mm, HSS Facts Diameter: 5 mm Length: 20 mm Weight: 0.01 kg Special features Material: HSS (high-speed steel) Brand: Metav IndustryLine Intended for holder 240.151 Image available FAQ What material is the marking tip made from? The tip is made from HSS (high-speed steel), giving the scribing needle good wear resistance and toughness for routine shop marking. Which holder is compatible with this needle? The needle is intended for use with holders compatible with the 240.151 series; the part is sold under SKU M240.151.A1. How does the ø 5 x 20 mm size affect handling? The ø 5 x 20 mm shank provides a compact, stiff clamping section that improves stability and reduces deflection during marking. Is product identification available for procurement systems? Yes, the item has a GTIN (4061905053672) and the catalog article number M240.151.A1 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø5x60 Scriber Needle for Digital Marking Gauge, 5 mm x 60 mm - Metav IndustryLine
Take advantage of the Ø 5 x 60 mm tip and model compatibility to ensure reliable, repeatable layout marks in daily workshop routines; the lightweight design minimises handling fatigue and keeps marking precise. Order this replacement scribing needle directly via Metav Werkzeuge or contact their consultants for technical clarification. Scribing needle M240.152.A1 — replacement tip, Ø 5 x 60 mm (Metav IndustryLine) Scribing needle M240.152.A1 is a precision replacement tip designed for use with compatible layout tools, providing a compact marking solution for workshop and metalworking tasks. Ø 5 x 60 mm tip size Compatible with models 240.152 and 240.153 Lightweight: approx. 10 g Consistent, measurable layout marks for shop-floor accuracy The compact Ø 5 x 60 mm geometry delivers a defined contact point that helps create consistent scribe lines on metal and other typical layout surfaces. Because the tip provides a narrow, stable contact radius, routine marking becomes more repeatable, reducing the need for corrective work and improving throughput. This measurable precision benefits quality control processes where clear, reproducible lines support efficient downstream operations and machining set-up. Low weight and straightforward replacement for efficient workflows Weighing approximately 10 g, the replacement tip contributes negligible additional mass to the marking instrument, which reduces operator fatigue during prolonged layout sessions. The design focuses on quick exchangeability with the specified layouts, enabling fast maintenance cycles and minimal downtime. The combination of small mass and straightforward fitment supports higher process reliability in busy workshops and on production benches. Suited to workshop and metalworking applications where control matters This replacement scribing needle is intended for standard layout and scribing tasks in metalworking, toolmaking and general workshop use. The compact form factor makes it suitable for tight access points and for marking detailed features on components prior to machining. Craftspeople and industrial operators benefit from the combination of compatibility and small form factor when preparing precise datum lines or transferring measurements to workpieces. Contact Metav Werkzeuge for a technical match to existing layout tools or to order this Metav IndustryLine replacement scribing needle via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.152.A1 GTIN: 4054469178370 Weight: 0.01 kg Dimensions: Ø 5 x 60 mm Customs tariff number: 90173000 Facts Diameter: 5 mm Length: 60 mm Weight: 0.01 kg Special features Compatible with models 240.152 and 240.153 Category: marking tools / scribing accessory SKU: M240.152.A1 FAQ Which models is this replacement tip compatible with? The replacement scribing needle is compatible with layout tools designated as models 240.152 and 240.153 and is supplied under SKU M240.152.A1. What are the exact dimensions and weight of the tip? Dimensions are Ø 5 x 60 mm and the mass is approximately 0.01 kg for the replacement scribing needle. For which tasks is this scribing needle most suitable? The tip is suitable for precise layout marking in metalworking, toolmaking and general workshop applications where narrow, repeatable scribe lines are required. Is this a permanent tool or a replaceable consumable? The component is designed as a replaceable scribing tip for the compatible layout instruments, enabling simple replacement when wear affects marking quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Achieve exact scribed lines and repeatable setups
A marking gauge is a precision scribing tool for transferring measurements and laying out parallel lines to an edge on workpieces. Available as robust wooden or metal variants, marking gauges, scribers and layout gauges are essential for accurate dimension transfer in both wood and metalworking. Metav supplies a selection of high-quality marking gauges designed for repeatable, workshop-ready performance.
Where a marking gauge pays off in the workshop
Marking gauges transfer measurements reliably by running a stock or fence against the workpiece edge while a steel pin or cutter scores a line at the set distance. This simple kinematic principle makes them invaluable across trades: metal fabrication for scribing on sheets and profiles before sawing or drilling; machine construction for repeatable hole patterns and fitment marks; joinery for accurately scribing mortises, tenons and dovetails; and model making for fine detail work on wood or plastics. Many modern marking gauges incorporate a nonius/scale or micrometer fine adjustment for precise setting and a play‑free guiding beam to ensure consistent results.
Cut set-up time and reduce rework
Integrating a marking gauge into standard processes improves throughput and reduces errors. Key practical advantages include:
- repeatability through play‑free guidance and secure locking screws, reducing measurement drift during series work.
- improved accuracy via fine adjustment options such as a micrometer or clear nonius/scale.
- durability from robust construction: metal bodies for maximal stability, wooden stocks for ergonomic handling.
- better ergonomics with grippy clamping screws and legible scales that speed set‑up and minimise eye strain.
- versatile application across metalwork, machine shop tasks, joinery and model making, where parallel scribe lines are required.
Metav: dependable precision, stocked for industry
Metav stands for democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With decades of specialist experience and over 48,000 customers, Metav combines expert sourcing with a broad range of workshop supplies. The Metav assortment includes marking gauges and related layout tools from reputable manufacturers, supported by the company’s large catalogue of over 250,000 products — a practical choice when reducing supplier complexity and securing reliable supply for industrial and craft use.
Summary: make precise marking accessible
A marking gauge (also referred to as a scriber or layout gauge) brings measurable improvements in accuracy and repeatability across metal and wood applications. Metav’s curated selection helps workshops adopt precise layout techniques with tools suited to the task.
FAQ
What is the best marking gauge for metalwork?
For metalwork, choose a marking gauge with a metal stock and a hardened scribing pin or cutter; the metal construction provides stability and the hardened tip gives a clear, lasting scribe on sheet and profile surfaces. Metav lists options with micrometer fine adjustment for precise settings.
How do I set up a marking gauge for repeatable scribing?
Secure the stock flat against the workpiece edge, set the beam using the nonius/scale or micrometer adjustment, then lock the clamping screw firmly. A trial scribe on a scrap piece verifies the setting before series work; Metav’s product notes recommend this check to ensure consistency.
When should I choose a wooden marking gauge versus a metal one?
Select a wooden marking gauge for comfortable handling and traditional joinery; opt for a metal marking gauge when you require maximum rigidity and long‑term dimensional stability in workshop or production environments.
How do fine adjustments affect marking accuracy?
Fine adjustments such as a micrometer spindle or a precise nonius scale allow smaller incremental settings and reduce operator variability, improving repeatability for multiple workpieces. Marking gauges with play‑free guidance translate these settings into consistent scribed lines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com