Precision collets for repeatable, high-speed clamping
Precision collets and collet chucks provide concentric, damage-free clamping of cylindrical tools and bar stock, ensuring outstanding runout and vibration control for modern CNC milling and turning. Designed from spring steel, these collets use radial elasticity to deliver 360-degree gripping force, which prevents shaft marks and enables vibration‑reduced high‑speed machining while shortening setup times. As a fundamental component in metalworking, collets excel in both toolholding and workholding applications, offering flexibility across ER‑style systems and pull‑type work collets. Key benefits include excellent concentricity, robust holding power and suitability for high‑precision serial production.
3mm 5C Collet High Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of high-precision clamping with a 3 mm nominal diameter and 0.02 mm repeatability, combined with an 87 mm overall length that supports stable toolholding in serial production. Order the collet directly via Metav Werkzeuge or ask our consultants if needed. 5C-3 Collet — 3 mm diameter, 87 mm length (Vertex) The 5C-3 Collet is a precision clamping element for 5C toolholders, engineered for consistent tool retention in machining and grinding applications. 3 mm diameter, 0.02 mm accuracy 87 mm overall length, sturdy construction Standard 5C interface, easy integration Improved process reliability through measurable precision A compact clamping solution with 3 mm nominal capacity and 0.02 mm repeatability reduces machining variation and lowers the need for rework. The combination of tight tolerance and repeatable clamping ensures that the held tool maintains its cutting geometry over series runs, which directly benefits part quality and process stability. Emphasis on precision and accuracy supports predictable cycle times and reliable measurement feedback in quality control. Designed for seamless integration into 5C toolholding systems The standard 5C interface and an 87 mm overall length allow straightforward installation into existing collet chucks and adapters, helping maintain machine uptime. The nominal dimensions facilitate correct stick-out and balance, which preserves spindle dynamics and reduces unwanted vibration during operation. Compatibility with conventional toolholding equipment simplifies logistics and shortens changeover sequences, supporting efficient production workflows. Consistent clamping for steady machining performance A robust construction delivers consistent clamping force, which contributes to longer tool life and steadier surface finishes. The modest weight 0.21 kg helps maintain spindle balance while providing sufficient mass for secure retention. Where stability and repeatability matter, the component’s mechanical characteristics support repeatable set-ups and reduced inspection interventions, aiding throughput in small to medium production batches. Practical handling and upkeep for workshop routines Routine inspection is straightforward because the geometry is standardised and quick to measure; visual checks and a simple runout test verify ongoing serviceability. Basic cleaning and careful storage prevent contamination and help retain the specified 0.02 mm performance over time. For customers seeking confirmation on fitment or advised set-up parameters, technical guidance is available to ensure correct application and avoid unnecessary downtime. Contact Metav Werkzeuge for tailored advice on selecting the right Vertex 5C-3 collet for production toolholding and to discuss compatibility with existing chucks Technical Data SKU: 5C-3 GTIN: 4061905084591 Manufacturer: Vertex ECLASS: 21041712 Facts Diameter: 3 mm Repeatability / accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg Special features 5C standard interface Precision clamping element Suitable for integration into standard toolholding systems FAQ Is the 5C-3 Collet compatible with standard 5C chucks? Yes. The 5C-3 Collet uses the standard 5C interface and is designed for installation in conventional 5C collet chucks and adapters. What level of clamping accuracy can be expected? The component provides a 0.02 mm repeatability specification, ensuring consistent tool positioning for precision machining tasks. Which tool shank diameter is the collet intended for? The collet is specified for a 3 mm nominal tool shank and is optimised for repeatable clamping at this diameter. How does the collet affect spindle balance and vibration? With an overall length of 87 mm and a weight of 0.21 kg, the collet contributes minimal imbalance when used within normal toolholder parameters, supporting reduced vibration and stable cutting conditions. Can the Vertex 5C-3 Collet be inspected easily in a workshop? Yes. The collet’s standard geometry allows quick visual inspection and simple runout checks to confirm it continues to meet the stated 0.02 mm performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Set With MT-2 Taper And Collet Chuck, 10 Pieces - Vertex
Take advantage of the combination of precision clamping, broad MT-2 compatibility and a complete ER-16 collet set to reduce setup times and improve part quality on the shop floor. Order the equipment directly via Metav Werkzeuge or ask the consultants for tailored advice. Vertex Collet Set V-412 – ER-16 collets with MT-2 Morse taper The Vertex Collet Set V-412 is a compact clamping solution designed for accurate tool holding and reliable spindle interface on machines fitted with an MT-2 Morse taper. ER-16 collets for precise tool clamping MT-2 Morse taper shank for spindle compatibility Complete set covering common tool diameters Robust design for repeatable concentricity Precision clamping for consistent machining results The ER-16 collet system delivers high concentricity and consistent clamping force, which directly reduces run-out and vibration during cutting operations. That reliability translates into fewer rejects and longer tool life, improving throughput and lowering operating costs. Thanks to the standard design of the collet system, repeatable results are achieved without complex adjustment, making it straightforward to maintain machining tolerances in daily production. Broad machine compatibility to speed up setup Fitted to an MT-2 Morse taper, this clamping solution matches a wide range of bench drills and small milling spindles common in toolrooms and job shops. The taper interface provides axial positioning and stable transmission of cutting forces, simplifying mounting and changeover. The combination of MT taper and ER-16 collets allows quick switching between tooling sizes while maintaining a secure grip, enabling faster job changes and reduced machine downtime. Built for workshop durability and reliable repeatability Engineered as a complete collet set, this product supports flexible tooling choices and minimises the need for additional holding devices. The design focuses on repeatable performance under typical workshop conditions, delivering stable concentricity part after part. For teams aiming to streamline Fixturing and improve process reliability, the set offers a pragmatic trade-off between versatility and consistent clamping precision. Contact Metav Werkzeuge in Emmerich for personalised advice on the Vertex Collet Set V-412 and to arrange timely supply and technical guidance Technical data Article number: V-412 GTIN: 4061905083570 Manufacturer: Vertex Facts Weight: 1.05 kg Pieces per set: 10 eClass: 21022190 Special features ER-16 collet system MT-2 Morse taper shank Complete collet set (multiple diameters) Fast availability for workshop supply FAQ What machines are compatible with this collet set? The collet set fits spindles accepting an MT-2 Morse taper; the Vertex Collet Set V-412 is therefore suitable for many bench drills, small milling machines and similar workshop spindles. How does an ER-16 collet improve machining quality? The ER-16 system provides uniform radial clamping, reducing run-out and vibration. This results in better surface finish and longer tool life when using the Vertex collet system. Is the set suitable for frequent tool changes? Yes. The complete set is designed to allow quick swapping of tools while maintaining repeatable concentricity, which helps to keep changeover times to a minimum. Can the collets be used in other ER-16 chucks? ER-16 collets conform to the ER standard and can be used in compatible ER-16 chucks; compatibility with MT-2 spindles depends on the chuck or arbor used with the spindle. What should be checked during routine maintenance? Regular inspection of the clamping surfaces and the taper interface is recommended to preserve concentricity and gripping performance; cleaning debris from the taper and the collet bore helps maintain reliable clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16mm Rubber Flex Collet for VTA7 Threading Attachment, Suitable Ø2.5–Ø4.5mm - Vertex
Robust performance and reduced vibration result from the combination of the rubber-flex design, a 16 mm diameter and a compact 11 mm length, delivering secure gripping for threading operations. Order the matching FC-10 collets directly via Metav Werkzeuge or consult our advisors for specification support. Rubber-Flex collets FC for threading unit VTA7 — 16 mm diameter, Vertex A Rubber-Flex collet engineered for the VTA7 threading unit, providing secure, low-vibration clamping for small threaded parts in precision workshops. Compatible with VTA7 threading unit 16 mm diameter for stable grip 11 mm compact length for rapid setup Rubber-flex design reduces vibration Consistent clamping for reliable threading results The rubber-flex collet design combines elasticity with firm contact to maintain secure clamping even under intermittent loads. With a 16 mm diameter, the unit is dimensioned to stabilise small workpieces and reduce slippage during rotation, which improves thread quality and reduces rework. The elastic surface also offers vibration damping, lowering the risk of chatter and supporting steadier machining parameters, an advantage for shops aiming to maintain throughput without sacrificing finish. Rapid integration with existing threading equipment Engineered for straightforward installation in the VTA7 threading unit, the collet’s 11 mm length minimises overhang and helps preserve tool-to-work alignment during set-up. Compatibility with precision gauges (Ø2.5–Ø4.5 mm) assists in fast centring and verification of clamping performance. The compact form factor therefore contributes to reduced set-up time and predictable process behaviour, enabling technicians to keep cycle times tight while retaining control over concentricity and runout. Gentle handling for delicate and finished parts The elastomer contact surface protects component surfaces where metal-to-metal clamping would leave marks. This workpiece protection is particularly useful when handling soft or plated parts and when post-process inspection criteria are stringent. The collet’s flexible grip also accommodates minor diameter variations without the need for frequent retooling, adding practical versatility for small-batch and mixed-run production. Reliable sourcing and workshop support Produced under the Vertex name, these collets follow established precision standards and are supplied with clear identifiers for inventory and procurement. Metav Werkzeuge acts as a European quality filter and distribution partner, offering access to a broad range of precision products that reduce the need for multiple suppliers. The combination of manufacturer provenance and centralised supply supports consistent workshop availability and traceable procurement for maintenance planning. For availability of Vertex FC-10 rubber-flex collets for the VTA7 threading unit and expert advice on integration, contact Metav Werkzeuge in Emmerich for tailored supply and specification guidance Technical data Article number: FC-10 GTIN: 4061905084355 ECLASS: 21041712 Core measurements Diameter: 16 mm Length: 11 mm Suitable for precision gauges: Ø2.5–Ø4.5 mm Applications / Features Compatible with VTA7 threading unit Rubber-flex design for secure gripping Compact form for threading operations FAQ Which machines are these collets compatible with? The collets are specified for the VTA7 threading unit and suit installations where compact, low-vibration clamping is required. What clamping diameter and range apply? The main body is 16 mm in diameter; suitability for precision gauges is stated as Ø2.5–Ø4.5 mm. Are these collets suitable for delicate threads and finished surfaces? Yes. The rubber-flex contact surface provides workpiece protection and reduces marking on softer or plated components. How long is the collet and how does that affect setup? The collet length is 11 mm, a compact dimension that reduces overhang and helps preserve alignment during set-up. What identifiers should be used for ordering and inventory? Use SKU FC-10 and GTIN 4061905084355 for procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
220x110x6mm Plastic Holder For VMS-5 Collets, Lightweight 0.2kg - Vertex
Compact and lightweight storage with a focus on organisation and protection: the plastic construction and the compact dimensions 220 x 110 x 6 mm keep VMS-5 collet sleeves ready for use while saving bench space. Order the VMS-5 Plastic Holder directly via Metav Werkzeuge or ask our consultants if needed. VMS-5 Plastic Holder for Collet Sleeves – Compact 220 x 110 x 6 mm by Vertex The VMS-5 Plastic Holder is a compact storage solution for workshop and tooling environments, engineered to keep VMS-5 collet sleeves organised and protected within a small footprint. Durable plastic construction Compact 220 x 110 x 6 mm format Lightweight at just 0.2 kg Designed for VMS-5 collet sleeves Better organisation, less downtime A streamlined storage solution reduces searching and handling time, directly supporting workflow efficiency. The plastic tray is shaped for orderly placement of collet sleeves, enabling quick access and clear separation of tooling. With a compact footprint of 220 x 110 x 6 mm, the tray fits into standard tool cabinets and bench shelving, contributing to a tidier workstation and fewer misplaced parts. This organisation helps to maintain production rhythm and minimise interruptions. Robust protection without bulk Made from resilient plastic, the holder offers protection from knocks and contamination while remaining exceptionally lightweight at 0.2 kg. The low mass minimises stress on storage systems and makes handling effortless during tool changes. The material resists common workshop soiling and is easy to wipe clean, preserving the condition of stored components and reducing maintenance of both holder and tooling. Such protection supports consistent clamping performance and prolongs the service life of precision parts. Easy integration into existing setups The holder is designed specifically for VMS-5 collet sleeves and adapts well to established tool-storage arrangements. Its slim profile saves shelf depth and allows several units to be placed side by side, creating modular storage arrays for different sleeve sizes or types. The simple, functional design requires no additional fixtures and can be combined with bench organisers or drawer inserts to form a compact, efficient storage system that helps maintain order in busy shops. Secure organised clamping storage with the Vertex VMS-5 Plastic Holder — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply. Technical Data Article number: VMS-5 GTIN: 4061905084768 Manufacturer: Vertex Machinery Works Co., Ltd. Material: Plastic Dimensions: 220 x 110 x 6 mm Weight: 0.2 kg Facts Dimensions (L x W x H): 220 x 110 x 6 mm Weight: 0.2 kg ECLASS: 21022190 GTIN numeric: 4061905084768 Special features For collet sleeves: VMS-5 Brand: Vertex Compact, low-profile design Easy-to-clean plastic material FAQ How compatible is the holder with different collet sleeve types? The VMS-5 Plastic Holder is designed specifically for VMS-5 collet sleeves and provides correct seating and separation for that sleeve type, ensuring consistent organisation for compatible tooling. What material is the holder made from and how durable is it? The Vertex VMS-5 plastic holder is manufactured from a resilient plastic that resists workshop dirt and provides impact protection while remaining lightweight for easy handling. Can the holder be used in drawers or on open shelving? The slim 220 x 110 x 6 mm profile makes the holder suitable for both drawer storage and open bench shelving, allowing modular arrangement alongside other workshop organisers. Does the holder require special maintenance? Maintenance is minimal: the plastic surface can be wiped clean with a cloth; the design of the VMS-5 holder avoids crevices that trap debris, simplifying routine upkeep. Is the product identified for ordering by a catalogue number or GTIN? Yes, the holder is listed under article number VMS-5 and GTIN 4061905084768 for straightforward procurement and inventory management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER‑16 Collet Chuck For ER Collets With Morse Taper Shank - Vertex
Take advantage of precise clamping with standard ER collets and a compact Ø 28 mm form factor to streamline tooling operations. The combination of ER-16 compatibility, a Morse taper mounting and lightweight design supports fast spindle changes and space-saving setup. Order the component directly via Metav Werkzeuge or contact our consultants for compatibility guidance. V-401 collet chuck — Collet chuck for ER collets, ER-16, Ø 28 mm (Vertex) A V-401 collet chuck engineered for use with ER collets and a Morse taper mounting, providing compact clamping for machine spindles and toolholding operations ER-16 compatibility for standard ER collets Morse taper (MT) mounting for spindle integration Compact Ø 28 mm outside diameter Manufactured by Vertex Consistent clamping for repeatable machining results The compact design delivers precise clamping for short, repeatable toolholding cycles. Compatibility with ER collets and the specified ER-16 size ensures standardised grip across common tooling ranges, reducing setup variation. Explained simply: an ER collet is a segmented sleeve that contracts uniformly around a tool shank when tightened, so the holder transfers torque and axial forces evenly. This makes the system particularly suitable where consistency between multiple operations is required and where quick tool changes improve throughput. Easy integration into Morse taper spindles Designed for machines with a Morse taper mounting, the unit allows straightforward spindle integration without extensive adapters. The Morse taper interface is a long-established spindle standard that provides concentric seating and secure axial positioning; when combined with the ER clamping system it offers both mechanical stability and fast interchangeability. This pairing supports rational workshop workflows by simplifying the transition between different holders and minimising machine downtime. Space-saving, lightweight solution for versatile workshops With an outside diameter of Ø 28 mm and a low mass, the chuck occupies minimal axial and radial space in the spindle, enabling closer tool spacing and improved access in compact setups. The reduced mass contributes to lower inertia during acceleration and deceleration phases, which can be advantageous in high-volume or high-speed sequencing where every gram counts. The construction suits general workshop and industrial environments that value compact, industry-standard toolholding components. For secure and compatible clamping solutions from Vertex, consult Metav Werkzeuge in Emmerich for tailored advice and to confirm spindle compatibility — contact via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Article number: V-401 GTIN: 4061905083877 Model: Collet chuck (V-401) Facts Outside diameter: 28 mm Weight: 0.2 kg EClass: 21020405 Special features Compatible with ER collets (ER-16) Morse taper mounting for spindle integration Manufacturer: Vertex FAQ Which collet size does this holder accept? The holder accepts ER-16 collets; confirm the required clamping range against the ER-16 specification when selecting tooling. Is the chuck suitable for standard Morse taper spindles? Yes, the unit is specified for a Morse taper mounting intended for direct spindle seating and integration. What is the outside diameter of the toolholder? The outside diameter is Ø 28 mm, making it suitable for compact spindle arrangements. How heavy is the V-401 collet chuck? The V-401 weighs approximately 0.2 kg, facilitating lower rotational inertia in short overhang setups. Who manufactures the component and where is it produced? The component is manufactured by Vertex, listed under the model V-401 and distributed through Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck With Steep Taper, Quick-Change – Vertex
Take advantage of the combination of reliable precision clamping and a compact 28 mm footprint for consistently high concentricity in small toolholders. Order directly via Metav Werkzeuge or ask the consultants for compatibility and integration advice. Collet chuck V-741 — ER‑16 steep taper, compact 28 mm diameter, Vertex A collet chuck V-741 designed for secure clamping with ER‑16 collets, suited to precision machining centres and compact toolholders. Steep taper for ER-16 collets Compact 28 mm diameter Robust construction, 1.5 kg weight Precision clamping for concentricity Reliable clamping for repeatable results A compact clamping solution that focuses on precision and repeatability. The steep taper interface and compatibility with ER‑16 collets reduce axial and radial movement, improving concentricity on short tool overhangs. For operations where part tolerances are tight, this type of collet chuck minimises rework by securing tools with consistent grip force; the result is fewer rejects and more predictable cycle times. Technical stability is achieved without complex adjustment, which supports steady production in small-batch and medium-volume environments. Compact footprint with enhanced rigidity The small 28 mm diameter makes the chuck easy to integrate into compact spindles and multi‑tool heads while maintaining mechanical rigidity. The modest mass of 1.5 kg contributes to low rotating inertia, which can help preserve spindle response and balance. The steep taper design increases contact area between the chuck and the collet, converting clamping force into higher stiffness at the cutting edge. This configuration benefits high‑precision finishing and light machining tasks where both space and stiffness are at a premium. Time saving through reduced setup and maintenance Designed for workshop efficiency, the chuck supports fast collet changes and straightforward cleaning, reducing downtime between operations. Improved run‑out stability lowers the need for frequent tool re‑setting and inspection, while the simple mechanical design keeps routine maintenance minimal. For fleet managers and production planners, the predictable behaviour of this toolholder aids scheduling and reduces the total time spent on setup and troubleshooting over the life of the tool. Practical applications and safe handling in everyday use Ideal for small milling, drilling and turning tasks, the chuck suits jobs that demand accurate tool holding in tight spaces. ER collets are versatile: a single collet system accommodates a range of tool shank sizes while maintaining clamping accuracy. The steep taper helps translate axial tightening into uniform radial pressure around the tool shank, which is especially useful when machining short cutters or reamers. For safe operation, ensure collets and tools are clean and undamaged before assembly to retain the declared performance characteristics. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing toolholders and to arrange supply of the Vertex V‑741; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: V-741 GTIN: 4061905084218 Brand: Vertex Data Diameter: 28 mm Weight: 1.5 kg ECLASS: 21020405 Taper: ER-16 Special features Steep taper for ER‑16 collets Compatible with ER collet system Compact design for small toolholders FAQ Which collet series fits this chuck? The chuck is designed for the ER‑16 collet series; Vertex V‑741 accepts ER‑16 collets for a range of tool shank diameters. Is the V‑741 suitable for high‑speed spindles? The V‑741 provides a compact, low‑inertia interface; suitability for high speeds depends on specific spindle limits and balancing of the complete tool assembly. How does the steep taper affect clamping performance? A steep taper improves contact pressure transmission and rigidity, so the Vertex V‑741 delivers consistent clamping force and reduced run‑out in short overhang applications. Can the chuck be used in milling and turning machines? Yes, this collet chuck is appropriate for milling, drilling and light turning in setups where ER‑16 collets and a compact 28 mm holder are required. What should be checked before assembly? Inspect collets and tool shanks for cleanliness and damage; the Vertex V‑741 performs best when components are free of chips and burrs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
50mm ER-32 Collet Chuck, High-Precision Clamping - Vertex
Take advantage of precision clamping and a compact, lightweight design to improve setup consistency and spindle efficiency; the ER-32 taper and 50 mm form factor make this collet chuck a reliable choice for standard toolholding tasks. Order the unit directly via Metav Werkzeuge or contact the team for application advice. V-101 collet chuck — ER-32, 50 mm diameter, precision clamping The V-101 is a precision collet chuck designed for secure toolholding in milling and turning setups, featuring an ER-32 taper for broad compatibility with standard collets Precision ER-32 taper for secure clamping 50 mm outer diameter for compact toolholding Lightweight design, approx. 0.7 kg Rapid dispatch from Metav Werkzeuge stock Consistent clamping that reduces rework and downtime The ER-32 taper and robust collet interface deliver a repeatable clamping solution that supports accurate machining cycles. By relying on a collet chuck with a standard ER-32 taper, shops benefit from wide compatibility with available collet sizes and accessories, which simplifies tool inventory and changeover. The proven geometry of this toolholder minimises axial and radial play during operation, helping to maintain surface finish quality and reduce the frequency of corrective rework. This focus on repeatability translates directly to higher first-pass yield and predictable production throughput. Compact format and low mass for flexible integration With a nominal diameter of 50 mm and a weight of approximately 0.7 kg, the toolholder offers a compact footprint that suits constrained spindle noses and stacked tooling assemblies. The reduced mass lowers inertial load on the spindle during rapid acceleration and deceleration, which can improve dynamic response in high-feed operations. The compact dimensions also facilitate closer proximity of adjacent tools in multi-tool setups, enhancing overall machine utilisation. The lightweight construction supports faster, safer tool changes while maintaining the rigidity expected from a professional clamping system. Engineered for workshop reliability and supply chain confidence Manufactured by Vertex, the chuck is intended for everyday industrial use and straightforward integration into existing ER-32 toolholding ecosystems. Availability from Metav Werkzeuge and the company’s established logistics in Emmerich ensures predictable procurement for production planning; Metav’s position as a precision partner is backed by decades of experience and a broad product range. The combination of a recognised manufacturer and a dependable distributor reduces procurement risk and supports continuous operation, particularly important for institutions that require consistent replacement parts and tooling standards. Contact Metav Werkzeuge in Emmerich for tailored application advice or to confirm compatibility with existing ER-32 collets — email info@metav-werkzeuge.com or call +49 2822 7131930 for a prompt response Technical data Article number / SKU: V-101 GTIN: 4061905084362 Manufacturer: Vertex Numbers / Core technical data Diameter: 50 mm Weight: 0.7 kg Taper: ER-32 eClass: 21020405 Designs / Special features Collet chuck design ER-32 taper compatibility Compact 50 mm form factor Produced by Vertex FAQ What taper standard does this collet chuck use? The V-101 collet chuck uses an ER-32 taper, making it compatible with standard ER-32 collets and accessories from Vertex and other manufacturers. Is the V-101 suitable for compact spindle noses? Yes, the 50 mm diameter and lightweight build of the collet chuck support integration in compact spindle configurations where space is limited. How heavy is the unit and what impact does that have? The toolholder weighs approximately 0.7 kg; the lower mass helps reduce spindle inertia and can improve dynamic response during high-speed tool changes. Can this chuck be used with existing ER-32 collets? Compatibility with standard ER-32 collets is a core feature of the product; the chuck is intended for use with commonly available ER-32 collet ranges. Who manufactures the V-101 and where can it be sourced? The chuck is manufactured by Vertex and is available through Metav Werkzeuge for rapid dispatch from Emmerich stock. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Chuck R8 Shank Quick-Change, ER-16 Collet Holder - Vertex
Benefit from the combination of ER-16 clamping, an R8 shank and a compact 0.5 kg design for secure, repeatable toolholding in small spindle applications; order the Vertex V-301 via Metav Werkzeuge or consult the technical team for tailored application advice. V-301 Collet Chuck (ER-16, R8 shank) — Vertex The V-301 collet chuck provides precise clamping for small-diameter tooling in R8-spindle milling and drilling applications. ER-16 clamping for high positional accuracy R8 shank for common milling spindle compatibility Compact, lightweight design 0.5 kg Suitable for small-diameter tooling Consistent concentricity for reliable machining The ER-16 configuration delivers precise clamping with a focus on minimising lateral runout, which improves surface finish and tool life. By using an ER-16 system, the chuck secures collets evenly around the tool shank, reducing vibration and enhancing repeatability. This results in fewer rework cycles and a steadier production rhythm, particularly when working with small cutters or drills where concentricity is critical. The engineering supports predictable outcomes in repetitive tasks and short-run production. Straightforward compatibility with R8 spindles Designed with an R8 shank, the chuck is compatible with a broad range of standard milling and drilling spindles used in many workshops. The R8 interface simplifies installation and replacement, enabling rapid changeovers between holders without special adapters in typical R8 setups. Compatibility with established spindle standards helps maintain machine uptime and reduces the need for multiple specialised holders, supporting efficient tool management across varied tasks. Compact construction that eases workshop handling The compact, lightweight construction (approx. 0.5 kg) reduces inertia on smaller spindles, improving responsiveness during rapid feeds and tool changes. A lighter holder also makes manual handling and setup easier, lowering the risk of accidental damage during mounting. Coupled with the ER-16 system, the design supports secure clamping for small-diameter tools while keeping overall mass to a minimum, which benefits both manual and CNC environments that demand agile, precise tooling. Choose the Vertex V-301 for compact, accurate clamping and contact Metav Werkzeuge in Emmerich for expert advice or webshop ordering assistance via info@metav-werkzeuge.com Technical data Article number: V-301 GTIN: 4061905084508 Manufacturer: Vertex Net weight: 0.5 kg Cone: ER-16 Shank: R8 Facts Weight (kg): 0.5 EClass: 21020405 Special features R8 shank ER-16 collet system Compact construction Suitable for small-diameter tooling FAQ Which collet series fits this chuck? The V-301 uses the ER-16 collet series; ER-16 collets are the correct choice for clamping with this Vertex collet chuck. Can this holder be used in standard R8 spindles? Yes, the R8 shank on the V-301 is designed for direct use in standard R8 milling and drilling spindles. How does the chuck affect runout and tool life? The ER-16 clamping geometry on the Vertex V-301 is intended to reduce lateral runout, which helps improve surface finish and extend tool life under normal operating conditions. Is the V-301 suitable for small workshops and mobile setups? The compact and lightweight design (0.5 kg) makes the V-301 well suited to small workshops and environments where easy handling and fast tool changes are beneficial. Where to find more detailed specifications or part numbers for collets? Further technical details and compatible collet part numbers are listed on the product page for the V-301 in the Metav Werkzeuge webshop Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L Collet Chuck With ER-16 Collets Set, 10 Pieces - Vertex
Take advantage of the combination of precision clamping, proven SK taper compatibility and a complete ER collet set for reliable toolholding in batch production. Order the Vertex unit directly via Metav Werkzeuge or ask the consultants for further technical details. Collet chuck V-751 — ER-16 collet set, SK-40-70L taper (Vertex) The Collet chuck V-751 is a precision toolholder designed for secure clamping in milling and drilling operations, compatible with standard SK-40-70L spindles and supplied as a complete ER-16 collet set ER-16 collets included for versatile clamping SK-40-70L taper for standard spindle connection Balanced construction for stable high-speed running Robust 2.3 kg body for workshop durability Maximum precision for consistent component quality The V-751 delivers high concentricity and consistent clamping force thanks to the ER collet principle, which grips the tool shank uniformly around its circumference. This improves surface finish and tool life by reducing deflection and vibration during machining. By combining a stable mass with a precision-designed chuck interface, the unit supports repeatable results across routine production runs, helping to reduce scrap rates and rework. The ER collet system used here is a standard solution in toolholding, providing reliable axial and radial stability for a variety of shank geometries. Fast set-up and compatibility with common spindle interfaces With the SK-40-70L taper, the chuck integrates with many conventional machine spindles, allowing straightforward retrofit or replacement without special adaptors. The supply as a full ER-16 collet set simplifies the changeover between different tool diameters and reduces downtime at the machine. ER collets compress to accommodate a range of shank sizes within their standard tolerance, which means fewer specialised holders are required. For maintenance, collet replacement and cleaning are simple procedures that keep clamping accuracy consistent over extended service intervals. Robust construction for workshop reliability and low maintenance A solid build, reflected in a compact mass of 2.3 kg, gives the chuck the inertial stability needed for demanding cuts and higher spindle speeds. The design focuses on durability and straightforward upkeep, with parts that can be inspected and replaced without complex procedures. Being a Vertex-manufactured tool, it benefits from established quality controls and workshop-proven geometry. Metav Werkzeuge complements this with a European distribution and quality-filtering process from Emmerich, offering dependable supply and documentation for quality-conscious buyers. For tailored advice from Metav Werkzeuge in Emmerich, contact the team via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and lead times Technical data Article number: V-751 SKU: V-751 GTIN: 4061905083617 Manufacturer: Vertex Taper: SK-40-70L Collet type: ER-16 Set: Yes Weight: 2.3 kg Facts Weight: 2.3 kg GTIN: 4061905083617 Pieces per set: 10 eClass: 21020405 Special features ER-16 collets supplied as a set Compatible with SK-40-70L spindles Balanced construction for reduced vibration Vertex manufacturing FAQ What spindle taper does this chuck fit? The chuck fits machines with an SK-40-70L taper; the Vertex V-751 is specified for that standard spindle interface. Are collets included with the chuck? Yes, the supply is a complete ER-16 collet set delivered with the Vertex V-751 collet chuck. Is the V-751 suitable for high-speed machining? The balanced construction and robust mass support stable running at elevated spindle speeds, making the V-751 suitable for many high-speed applications. How heavy is the chuck and what does that mean in practice? The chuck weighs 2.3 kg, which contributes to inertial stability and helps reduce vibration during demanding cuts. Can the chuck be used for both milling and drilling operations? The ER-16 system and the secure clamping principle make the chuck suitable for a range of machining tasks, including milling and drilling, where standard ER collets are appropriate. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Set 18 Pc With NT-30 Taper, SK-Style Collet Chuck - Vertex
High-precision clamping combined with wide compatibility and a complete set of ER‑32 collets ensures reliable toolholding and shorter setup times in production. Order the kit directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Vertex V-201 Collet Set — ER‑32 collets with NT‑30 SK taper A collet set designed for precision clamping in milling and CNC toolholding, supplied with an SK taper for easy spindle mounting ER‑32 collets for wide tool range NT‑30 SK taper shank Set of 18 precision collets Robust design, 4.2 kg kit weight Consistent clamping for repeatable machining quality The kit delivers consistent clamping through the ER‑32 collet system, which is widely used for secure tool retention in machining processes. The consistent radial grip reduces tool movement and helps to maintain dimensional accuracy across batches. Explaining the term: ER‑32 refers to the collet size and clamping range standard, offering a balance between versatility and accuracy. This stability supports efficient cycle times and reduces the need for rework, contributing to predictable production outcomes. Designed to fit NT‑30 spindles and streamline changeovers Compatibility with the NT‑30 SK taper ensures straightforward mounting in compatible spindles, enabling fast tool changes and minimal downtime. The SK taper provides a rigid connection between spindle and toolholder, translating torque reliably into the cut. The kit suits common workshop setups where quick, repeatable clamping is required, helping to standardise tooling across machines. Clear labelling and a methodical organisation of components support rapid retrieval and minimise setup errors. Durable construction for everyday workshop use and simple maintenance The toolholding kit is engineered for workshop conditions, focusing on functional robustness and easy handling. Components are organised as a complete set for operational convenience and to simplify inventory management. Routine maintenance is limited to keeping clamping surfaces clean and inspecting collets for wear; this straightforward care preserves clamping precision and extends service life. For bespoke applications or unusual spindle interfaces, technical consultation is recommended to ensure the correct configuration is selected. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex V-201 collet set into existing machine setups or to request stock availability from our European warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: V-201 GTIN: 4061905083082 Brand: Vertex eClass: 21022190 Facts Weight: 4.2 kg Collet type: ER‑32 Taper: NT‑30 Pieces per set: 18 Special features SK taper shank for spindle mounting Complete collet set for toolholding Organised kit for workshop use FAQ What spindle taper is required for this kit? The kit is supplied for an NT‑30 SK taper and is designed to mount on spindles accepting that taper; the Vertex V-201 specification confirms NT‑30 compatibility. Which collet standard is included and what does it mean? The set uses the ER‑32 collet system; ER‑32 denotes a standardised clamping collar size that provides a practical balance between clamping range and rigidity for various tool diameters. Is the set suitable for CNC milling applications? Yes, the Vertex V-201 collet set is intended for precision toolholding in milling and CNC environments where reliable clamping and fast tool changes are needed. What is included in the delivery of the V-201 kit? The V-201 delivery comprises a complete set of ER‑32 collets and the matching SK taper interface as listed in the product data. How should the collets be maintained to preserve accuracy? Regular cleaning of clamping surfaces and inspection for wear will maintain the clamping precision of the collets; simple preventive care extends component life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT2 Taper Adapter Arbor, Morse Taper Shank, Precision Tool Holder - Vertex
Take advantage of a secure MT2 taper interface and compact 0.6 kg mass for stable toolholding and reduced spindle downtime; with fast dispatch from Metav Werkzeuge, the VI-102 provides a reliable, readily available solution—order directly via Metav Werkzeuge or consult the technical advisors for application guidance. VI-102 Morse taper holder (MT2) by Vertex — compact 0.6 kg VI-102 Morse taper holder designed to provide a secure taper connection for machine-tool toolholding in general metalworking applications. MT2 taper for common spindles Compact weight at 0.6 kg Fast dispatch from stock Precision seating that keeps production moving The MT2 taper interface offers a precision fit that transfers torque and radial load through a tight taper contact rather than fasteners, helping to maintain spindle concentricity and reduce vibration. For workshops that demand consistent repeatability, this form of connection minimises runout and supports predictable cycle times. The VI-102 is engineered for straightforward integration with standard spindles accepting the MT2 taper, providing a dependable mechanical interface for drilling, reaming and other rotary tool operations. Compact mass and handling benefits for daily use At 0.6 kg, the holder is lightweight enough for convenient handling during tool changeovers while retaining sufficient mass for stable seating in the spindle. The modest weight reduces the effort required for manual installation and removal, and the balanced geometry contributes to faster, more secure seating. The result is fewer interruptions for maintenance and faster tooling cycles, which supports efficient shop-floor throughput without compromising stability. Readily available supply and shop-floor confidence Stock availability and prompt dispatch from Metav Werkzeuge shorten lead times and reduce the risk of production delays. The clear identification with SKU VI-102 and GTIN tracking ensures traceability across procurement and inventory systems. Where machine compatibility needs verification, the taper type and product identifiers simplify specification checks and spare-parts management. This combination of accessibility and documented specification supports robust planning for maintenance and tooling procurement. Contact Metav Werkzeuge for fast supply from the Emmerich stock and specification advice on the Vertex VI-102 Morse taper holder via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VI-102 GTIN: 4061905083969 Brand: Vertex Facts Weight: 0.6 kg eClass: 21029015 Special features Shank type: MT2 SKU: VI-102 Fast dispatch noted in product description Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b3/2f/97/63/63972fb3c806fb82109e33ce/vi-102-main.jpg FAQ Which spindle interfaces is the holder compatible with? The VI-102 Morse taper holder is compatible with machine spindles and adapters that accept an MT2 taper; compatibility should be confirmed against the machine spindle specification. What is the unit weight and how does that affect handling? The product weight is 0.6 kg for the Vertex VI-102, which supports easy manual handling while maintaining sufficient mass for secure seating. Is the taper suitable for precision drilling and reaming tasks? Yes, the MT2 taper of the VI-102 provides a precision seating that is suitable for standard drilling and reaming operations where taper toolholding is specified. How is the product identified for inventory and procurement? The holder is listed under SKU VI-102 and GTIN 4061905083969, which facilitates inventory tracking and procurement processes. What preparatory steps ensure correct seating of the taper? Ensure both the spindle and taper are clean and free of debris, verify correct alignment, and use an appropriate seating method (e.g. axial insertion with a light seating impact) to achieve proper frictional contact for the VI-102 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø0.5-5.0mm Collet Set, 9 Pieces — Vertex
High-precision clamping over a Ø0.5–5.0 mm range combined with a complete 9-piece configuration provides repeatable concentricity and streamlined small-diameter machining. Order the collet set directly via Metav Werkzeuge or consult our specialists if further data is required. Vertex Collet Set V08000 – Precision collets Ø0.5–5.0 mm, 9-piece set A Vertex collet set V08000 designed for accurate toolholding and consistent concentricity across small-diameter cutting and drilling tasks Precision collets Ø0.5–5.0 mm Complete 9-piece industrial set Rapid dispatch from European stock Repeatable concentricity for fine machining Improved accuracy for small-diameter machining High-precision clamping is essential when working with small tools. The collet set provides uniform radial support across the 0.5–5.0 mm range, which helps reduce runout and improves surface finish on delicate components. By ensuring axial alignment and consistent gripping force, the kit contributes to longer tool life and reduced scrap rates. For operations where tolerance and finish matter, reliable clamping translates directly into measurable productivity gains. Faster setup and predictable workflow A complete 9-piece configuration eliminates repeated searches for single collets and shortens changeover times. The organised set covers the most commonly used diameters, allowing efficient sequence planning for batches of small parts. Consistent clamping behaviour across the set reduces the need for repeated inspection and adjustment, so cycle times can be optimised without compromising precision. The result is a more predictable workflow and better utilisation of machine time. Built for repeatability and industrial use Manufactured under the Vertex name, the set is intended for workshop environments that demand repeatable concentricity and dependable performance. The straightforward design focuses on function: secure gripping, consistent centring and uncomplicated maintenance. Where traceable, repeatable results are required — for prototyping, repair or serial production — the assembly of matched collets supports consistent outcomes and simplifies quality control procedures. For precision small-diameter toolholding, place an order with Metav Werkzeuge for the Vertex V08000 collet set or contact our consultants at Metav for tailored advice and availability from our Emmerich warehouse. Technical Data Article number: V08000 GTIN: 4061905083549 Brand: Vertex Facts Diameter range: Ø0.5–5.0 mm Pieces per set: 9 ECLASS: 21022190 Special features Set: yes Description: Rapid dispatch available, purchasable online SKU: V08000 FAQ What diameter range does the set cover? The Vertex collet set covers a Ø0.5–5.0 mm diameter range suitable for small-diameter tooling. How many collets are included in the set? The kit contains 9 pieces, providing a compact selection of common small diameters for workshop use. Is the set suitable for precision finishing work? Yes, the matched collets in the Vertex set are designed to support repeatable concentricity, aiding precision finishing and reducing rework. Where can the Vertex V08000 be ordered from? The Vertex V08000 collet set is available through Metav Werkzeuge and shown with rapid dispatch in the online catalogue Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Precise, repeatable clamping for high-speed machining
Collets provide radial, 360-degree clamping that secures cylindrical tools and rod-shaped workpieces with outstanding concentricity and holding force. Designed from high-grade spring steel, these split clamping elements combine excellent runout accuracy with the grip required for vibration-reduced high-speed cutting (HSC) on modern CNC mills and turning centres.
How collets work and where they add value
The clamping principle relies on the radial elasticity of the split collet: when the collet is pushed into a tapered seat—either by tightening a nut in a collet chuck or by a pull stud and drawbar action—the slots constrict uniformly and the bore closes concentrically around the tool or workpiece. This uniform, full-circumference contact prevents pressure marks that occur with side clamping and ensures superior balance for demanding machining tasks. Typical applications include toolholding for end mills and twist drills, and direct spindle mounting for series turning using workholding collets such as 5C.
Practical benefits that improve shop performance
- Improved concentricity and runout for higher surface quality and longer tool life
- Uniform 360-degree force transmission, preventing shaft damage and reducing vibration
- Fast changeover and wide gripping ranges, reducing setup time and improving throughput
- Compatible with standard systems such as ER standard collets and 5C workholding solutions
- Suitable for high-speed cutting and applications requiring high dynamic balance
Metav: workshop precision made accessible
Metav combines decades of measurement and tooling expertise with a comprehensive range that simplifies procurement. Based in Emmerich, Metav operates as a quality filter for the European market and supports more than 48,000 customers. With over 250,000 products available, Metav supplies collets, collet chucks and complementary tooling from a single source—reducing supplier complexity and ensuring reliable delivery straight to the shop floor.
Technical data at a glance
- material: high-grade spring steel
- clamping principle: radial elasticity, split collet design
- force distribution: 360-degree force transmission
- compatibility: ER standard collets; steep taper and Morse taper chuck interfaces
- workholding types: toolholding collets, 5C workpiece collets, pull-stud/drawbar systems
- typical set content: collet range, collet chuck with taper, tightening wrench, protective storage case
- application: high-speed cutting (HSC), CNC milling, CNC turning, series bar turning
- advantages: reduced vibration, high dynamic balance, material-friendly clamping
FAQ
What are the main differences between ER collets and 5C collets?
ER collets are typically used for toolholding in collet chucks and offer a broad gripping range for taper-mounted chucks, while 5C collets are common as workpiece-holding collets for direct spindle mounting in lathes and fixture systems.
Can collets handle high-speed machining?
Yes. Collets made from high-grade spring steel, offering uniform clamping and excellent dynamic balance, are well suited to high-speed cutting (HSC) applications on modern CNC centres.
How does the 360-degree clamping benefit surface finish and tool life?
The full-circumference contact distributes clamping forces evenly, preventing localised deformation and vibration; this improves surface finish and extends tool life thanks to reduced runout and better balance.
Why choose Metav for collets and tooling?
Metav combines hands-on industry expertise with a broad product range and a strict quality filter in Emmerich, making it a dependable partner for procuring collets, collet chucks and associated tooling for professional workshops.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com