130mm Clamp Jaw No. 6313K for T-Slot 16+18mm, Clamping Height 0-55mm - AMF
Combining a compact total length of 130 mm with compatibility for T‑slot 16 + 18 mm, this clamping jaw delivers flexible fixturing and a wide clamping height range of 0–55 mm for varied workpieces. Order the component directly via Metav Werkzeuge or consult our specialists for integration support. Nr. 6313K clamping jaw — T‑slot 16 + 18 mm, clamping height 0–55 mm (AMF) A Nr. 6313K clamping jaw engineered for secure fixture in standard machine table T‑slots, offering adaptable height adjustment and straightforward integration with M16 clamping hardware. Fits T‑slot 16 + 18 mm Clamping height 0–55 mm Compatible with M16 clamping studs Total length 130 mm Versatile T‑slot compatibility for faster set‑ups The design targets rapid adaptation to common machine tables: the jaw accepts both 16 mm and 18 mm T‑slots, enabling fewer tool changes and condensed set‑up times. For workshop planners, this reduces the need for multiple specialised jaws and simplifies inventory. The geometry is optimised for standard clamping studs, so the component integrates smoothly into existing fixturing systems and supports repeatable positioning with minimal rework. Secure clamping across a wide height range Variable clamping is delivered through a broad clamping height range (0–55 mm) and defined axial offset (B2: 56 mm) that allow reliable contact with irregular or stepped workpieces. This range ensures firm contact pressure while maintaining accessibility for machining operations. The controlled height span improves stability during cutting or milling, helping to reduce vibration and improve surface finish in serial or single‑piece production. Compact form and straightforward installation With a total length of 130 mm and a nominal width of 18 mm, the jaw offers a compact footprint without sacrificing clamping surface area. The compact dimensions suit congested fixtures and make it simple to replace or rearrange elements on a machine table. Compatibility with M16 clamping hardware means existing studs and screws can be reused, lowering procurement effort and shortening downtime during changeovers. For precise, reliable fixturing with AMF components, contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603003NW Model: Nr. 6313K Label: Spannpratze Nr.6313K Gr.18 f.T‑Nut 16+18mm Spann‑H.0‑55mm AMF Facts T‑slot compatibility: 16 + 18 mm Width: 18 mm Total length: 130 mm Clamping height H1: 0–55 mm Secondary height H2: 42–84 mm Axial offset B2: 56 mm Suitable for: M16 Special features Product type: clamping jaw Brand: AMF Packaging unit: 1 SKU: 4000603003NW FAQ Is the jaw suitable for both 16 mm and 18 mm T‑slots? Yes. The clamping jaw is designed for T‑slot 16 + 18 mm, allowing it to be used on machine tables with either slot size. What clamping height can be achieved with this component? The jaw supports a clamping height range of 0–55 mm, providing flexibility for a variety of workpiece profiles. Can existing M16 studs be used with this jaw? Compatibility with M16 clamping studs is specified, so existing M16 hardware can generally be used for installation. What are the key installation dimensions to check before fitting? Refer to the total length 130 mm, width 18 mm, and the axial offset B2: 56 mm to ensure correct fit and clearance in the fixture layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Clamping Wedge For T-Slot 12+14mm, Clamping Height 0-35mm - AMF
Take advantage of precise T‑slot compatibility and adjustable clamping height to standardise fixture setups and reduce changeover time; order the Clamping prong No. 6313K directly via Metav Werkzeuge or consult our specialists for integration advice. Clamping prong No. 6313K — compact clamping element for T‑slot fixtures The Clamping prong No. 6313K is a purpose‑built clamping element for machine tables with 12 mm and 14 mm T‑slots, engineered to deliver repeatable clamping at low profile heights. T‑slot compatible 12 + 14 mm Adjustable clamping height 0–35 mm Width 13 mm for narrow fixtures Suitable for M12 clamping bolts Faster, more repeatable setups with T‑slot compatibility The design offers direct compatibility with standard T‑slot 12 + 14 mm machine tables, which simplifies fixture planning and reduces the need for adapters. By matching the slot geometry, the clamping element provides consistent repeatability and reduces lateral play during clamping cycles. The compact footprint supports denser fixturing layouts without compromising access to the workpiece, so set‑up times are shortened and throughput is improved in repetitive production tasks. Secure clamping across a practical height range With an adjustable clamping height of 0–35 mm (H1), this clamping prong adapts to different workpiece thicknesses while maintaining a low profile. The additional dimension references (H2: 30–55 mm, B2: 38) indicate compatibility with common fixture stacks and spacer arrangements used in professional clamping systems. The part is engineered for use with M12 clamping bolts, ensuring secure axial force transmission and straightforward integration into existing clamps and tensioning elements. Robust, space‑saving form for workshop efficiency Constructed to operate reliably in demanding shop environments, the clamping element’s 13 mm width and overall compact length of 88 mm permit installation where space is limited. The narrow section and defined contact faces reduce interference with tool paths and fixturing accessories. Supplied as individual units (packaging unit 1), the component suits both one‑off jigs and serial fixture builds, enabling modular expansion of clamping systems without extensive redesign. Practical integration and application notes The clamp prong is a dedicated clamping aid for curvature‑free, mechanical clamping in metalworking and general workshop applications. It mates with standard clamping hardware; no special fasteners are required beyond the specified M12 bolts. For multi‑station fixtures, the compact design supports closer spacing of clamps, increasing usable table area and enhancing workpiece stability during machining operations. For tailored advice on integrating the AMF clamping prong into existing fixtures or to order delivery from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge provides expert support and reliable supply from Emmerich to your workshop Technical Data Article number: 4000603000NW Type: Nr. 6313K Product: Clamping prong Brand: AMF Dimensions & measurable data Width: 13 mm Overall length: 88 mm T‑slot compatibility: 12 + 14 mm Clamping height H1: 0–35 mm Additional dimension H2: 30–55 mm B2 value: 38 Suitable for: M12 Packaging unit: 1 UID: 4000603000NW Materials & features Product type: clamping element for T‑slot fixtures Supply format: single unit Intended use: mechanical clamping in workshop fixtures FAQ What T‑slot sizes does this clamping prong fit? The clamping prong is compatible with 12 mm and 14 mm T‑slots, designed to match standard table profiles for secure seating and repeatable positioning. Which clamping height range is usable with this item? The primary clamping height range is 0–35 mm (H1); further dimension references (H2: 30–55 mm, B2: 38) describe additional stack options for fixture assemblies. Which bolt size is recommended for fastening? The component is designed for use with M12 clamping bolts to provide correct axial force and integration with common clamping hardware. Is the prong suitable for dense fixture layouts? Yes, with a 13 mm width and 88 mm overall length, the element is suitable for compact fixturing where space conservation is critical. Can the prong be used in serial production fixtures? Supplied as single units, the prong is intended for modular use and can be deployed in both single‑jig and serial fixture environments to improve process stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Clamping Jaw For T-Slot 20+22mm H0-65mm - AMF
Taking advantage of the combination of T-slot compatibility, an adjustable clamping height and a compact footprint ensures reliable, repeatable fixturing in mixed tooling setups; fast integration keeps cycle times low. Order the AMF component directly via Metav Werkzeuge or ask our consultants for configuration advice. Clamping wedge No. 6313K (Gr.22) — for T-slot 20 + 22 mm, clamping height 0–65 mm | AMF Clamping wedge No. 6313K is a compact clamping element designed for secure fixturing in machine tables with 20 mm and 22 mm T-slots, suited to M20 bolting and adaptable setups where space and repeatability matter T-slot compatibility for 20 and 22 mm channels Adjustable clamping height 0–65 mm 22 mm width for compact fixture layouts Suitable for M20 bolting, 140 mm overall length Secure, measurable clamping for T-slot fixtures The clamping wedge offers direct, mechanical locking into standard T-slot channels (20 + 22 mm), delivering a predictable contact surface and consistent clamp force. Compatibility with an M20 thread allows the use of common fasteners, simplifying procurement and maintenance. This predictability reduces setup variation and supports process control initiatives in small-batch and production environments, making the component suitable for workshops and production cells that require stable workholding. Flexible height range to match diverse tooling requirements With an adjustable clamping height of 0–65 mm (height variants noted: H1: 0–65 mm; H2: 50–100 mm), the element adapts to different stock thicknesses without complex adapters. The limited vertical adjustment enables quick reconfiguration between jobs and lowers fixture inventory by covering multiple applications with one component. Such adaptability shortens changeover time and improves throughput while maintaining secure contact and repeatable positioning during machining or assembly operations. Compact form factor that supports efficient layouts A 22 mm width and 140 mm overall length result in a compact footprint that integrates into dense fixture arrangements while preserving clearance for neighbouring clamps and tooling. Supplied as a single unit, the clamping wedge is intended for direct installation into existing fixturing systems where space optimisation and reliable clamping are priorities. The simple geometry eases inspection and replacement, supporting long-term uptime and predictable maintenance cycles. For tailored advice on integrating the AMF clamping wedge into existing fixtures or for ordering options, contact Metav Werkzeuge for consultancy and procurement support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 4000603006NW Type: Nr. 6313K Description: Clamping wedge Gr.22 for T-slot 20 + 22 mm, AMF Dimensions & compatibility Width: 22 mm Overall length: 140 mm T-slot compatibility: 20 + 22 mm Clamping height: 0–65 mm (H1) Suitable for: M20 Features & notes Product type: Clamping wedge Brand: AMF Packaging unit: 1 Axite enrichment: Addition: B2: 66; H1: 0-65; H2: 50-100 FAQ Is the clamping wedge suitable for both 20 mm and 22 mm T-slots? Yes. The component fits T-slot channels of 20 mm and 22 mm, designed for direct mounting in both sizes. What clamping height can be achieved with this wedge? The clamping height range is 0–65 mm for the H1 configuration; an additional H2 variant covers 50–100 mm as specified in the product enrichment. Can standard M20 fastenings be used with this clamping element? Standard M20 bolts and screws are compatible with the clamping wedge, enabling straightforward integration with common fixturing hardware. What is the product reference for ordering or spare part checks? Order or reference the item as No. 6313K, SKU 4000603006NW, when enquiring about availability or replacements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T-Nut Clamp Jaw 14mm Clamping Height 0-50mm M12x14x125 - AMF
Benefit from a robust clamping solution that combines a compact footprint, compatibility with standard 14 mm T‑slots and an adjustable clamping height range of 0–50 mm; order the clamping jaw directly via Metav Werkzeuge or ask the consultants for technical clarification. Clamping jaw Nr. 6321 – 14 mm T‑slot compatibility, 0–50 mm clamping height (AMF) The Clamping jaw Nr. 6321 is a compact fixture component engineered for reliable workholding in machines with 14 mm T‑slots, offering a variable clamp height from 0 to 50 mm for flexible set‑ups. For 14 mm T‑slots, precise fit Adjustable clamping height 0–50 mm Total length 140 mm for stable support Includes M12 x 14 x 125 clamping screw Precision clamping for standard T‑slot fixtures The clamping element is designed primarily for machines and fixtures that use a 14 mm T‑slot, delivering repeatable engagement and alignment. The adjustable 0–50 mm clamping height allows adaptation to different workpiece thicknesses without changing major components, which shortens set‑up times and reduces tool changes. This technical flexibility supports faster machine cycles and contributes to higher process efficiency in routine or batch production. Stable support through compact dimensions With an overall length of 140 mm and a profile width of 17 mm, the component provides a secure bearing surface that minimises movement under load. The geometry favours even distribution of clamping force and helps maintain position stability during machining operations. For fixture designers and workshop technicians, these dimensions mean easier integration into existing modular clamping systems and predictable behaviour under tightening torque. Supplied fastening for quick assembly The delivery includes a ready‑to‑fit fastening element M12 x 14 x 125, enabling immediate mounting in standard setups and avoiding extra procurement steps. The pre‑specified screw dimension simplifies procurement and ensures compatibility with the clamping jaw's threaded interface, which reduces downtime during retrofit or replacement operations. Clear, standardised fastening supports consistent torquing and repeatable clamping performance. Practical advantages for workshops and production lines As a fixture component from AMF, the clamping jaw is suited to industrial and trade workshops where fast, reliable workholding is required. The combination of standard T‑slot compatibility and a broad clamping height range supports varied part sizes and fixtures, improving operational throughput. For procurement managers and shop floor planners, the product offers a technical basis for reducing fixture complexity and consolidating spare parts across machines. For reliable integration into 14 mm T‑slot fixtures and procurement support, contact Metav Werkzeuge for product availability and expert advice on application planning. Technical data SKU: 4000833066NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Packaging unit: 1 UID: 4000833066NW Dimensions & core data T‑slot size: 14 mm Clamping height range: 0–50 mm Total length: 140 mm Width: 17 mm Included components & features Supplied fastening: M12 x 14 x 125 clamping screw Label: Spannpratze Nr.6321 f.T‑Nut 14mm Spann‑H.0‑50mm M12x14x125mm AMF Type designation: Nr. 6321 FAQ Is this clamping element compatible with 14 mm T‑slots? Yes. The Clamping jaw Nr. 6321 is specifically designed for 14 mm T‑slot fixtures and the SKU 4000833066NW identifies this configuration. What clamping height does the unit provide? The clamping height range for the AMF clamping jaw is 0–50 mm, allowing flexible adaptation to varying workpiece thicknesses. Is a fastening screw included with the clamping jaw? Yes. The delivery includes an M12 x 14 x 125 clamping screw for immediate mounting. What are the main dimensions to consider for fixture integration? Key dimensions are total length 140 mm and width 17 mm, providing the reference sizes for fixture layout and adjacent components. Which workshop applications suit this clamping jaw? The component is suitable for general fixturing and workholding on milling machines and modular tables where 14 mm T‑slots are used and a 0–50 mm clamping range is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T-Slot Clamping Wedge 12mm T-Nut, Height 0–50mm with M12x12x125 Clamp Screw - AMF
Take advantage of precise, adjustable clamping combined with straightforward integration into standard T-slot fixturing; the included M12 x 12 x 125 clamping screw reduces procurement steps while the 0–50 mm clamping range supports a wide variety of workpiece heights. Order or request advice via Metav Werkzeuge for reliable supply and technical guidance. Clamping wedge Nr. 6321 (AMF) — for 12 mm T-slot, 0–50 mm clamp height Clamping wedge Nr. 6321 is a compact clamping element engineered for secure workholding in 12 mm T-slots, offering an adjustable clamping height from 0 to 50 mm and supplied with an M12 x 12 x 125 clamping screw. Secure clamping from 0 to 50 mm Compatible with 12 mm T-slots Includes M12 x 12 x 125 clamping screw 17 mm width; 140 mm overall length Reliable adjustable clamping for T-slot fixtures The clamping wedge provides repeatable and precise workholding for machining and assembly tasks that use standard T-slot fixtures. Designed for compatibility with a 12 mm T-slot, the device enables straightforward positioning and a secure grip across the specified 0–50 mm clamping height. The integrated geometry ensures downward force is converted into stable lateral support, which reduces movement during cutting or assembly operations. The delivery includes an M12 x 12 x 125 clamping screw, eliminating the need for an additional fastener purchase and simplifying initial setup. For engineers and workshop managers this means less downtime and faster fixture changes while maintaining consistent clamping performance. Designed measurements that support stability and accessibility Compact dimensions contribute to efficient use of table space without compromising strength: the component presents a 17 mm width and 140 mm overall length, dimensions that allow multiple wedges to be arrayed along the T-slot for distributed clamping or stepwise support of elongated workpieces. The relatively slim profile minimises interference with tool paths while providing sufficient contact area to resist torsional and lateral loads. Using clearly defined metrics assists planning for fixture layouts and ensures the wedge integrates well with existing vices, stops and modular clamp components. The result is a dependable holding solution that supports both repeat production runs and one-off machining tasks. Streamlined integration and dependable supply chain benefits Including the matching clamping screw in the package reduces procurement complexity and speeds assembly of the clamping system; this combination of component and fastener is intended to lower installation time and inventory variety. The wedge’s straightforward function and familiar fastening standard make it easy to adopt within existing clamping setups, supporting quicker machine changeovers and predictable set-up times. Backing this hardware, Metav Werkzeuge provides accessible product information and logistics from its Emmerich hub, helping workshops maintain continuity of supply and make informed decisions based on measured component data rather than assumptions. For tailored advice on integrating the AMF clamping wedge Nr. 6321 into existing fixturing systems and to arrange purchase through Metav Werkzeuge, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833065NW Type: Nr. 6321 Brand: AMF Product type: Clamping wedge Packaging unit: 1 Facts Width: 17 mm Overall length: 140 mm Clamping height: 0–50 mm T-slot compatibility: 12 mm Special features Includes clamping screw M12 x 12 x 125 Label: Spannpratze Nr.6321 f. T-Nut 12mm axite enrichment: Addition: Spannschraube: M12 x 12 x 125; B2: 50 SKU / UID: 4000833065NW FAQ What T-slot size is this clamping element designed for? The clamping wedge Nr. 6321 is designed for a 12 mm T-slot and aligns with standard 12 mm table grooves. What clamping height range does the wedge support? The device offers a 0–50 mm clamping height, enabling secure gripping of workpieces within that vertical range. Is a clamping screw included with the product? Yes, the delivery for the clamping wedge Nr. 6321 includes an M12 x 12 x 125 clamping screw to simplify setup. What are the physical dimensions relevant for fixture planning? Key dimensions are 17 mm width and 140 mm overall length, which help determine spacing and interference with tooling. Can this wedge be used for distributed clamping along a workpiece? Yes, the geometry and length allow multiple wedges to be positioned along the T-slot for distributed support and improved stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T‑Slot Clamp Bar 18mm T‑Slot Height 0‑75mm M16×18×160 Clamp Bolt - AMF
Take advantage of the combination of precise T‑slot compatibility, a wide adjustable clamping range and the included M16 clamping screw for reliable fixturing; order directly via Metav Werkzeuge or ask the consultants for application advice. Clamping Claw No. 6321 — T‑slot 18 mm, clamping height 0–75 mm (AMF) A Clamping Claw No. 6321 designed for secure fixturing in 18 mm T‑slots, offering an adjustable clamping height from 0 to 75 mm for versatile workholding in machining and assembly setups. T‑slot 18 mm compatibility Adjustable clamp height 0–75 mm Includes M16 clamping screw Overall length 140 mm Secure, adjustable fixturing for T‑slot tables The clamping element delivers a practical solution for fast and repeatable workholding on machine and assembly tables with a T‑slot 18 mm standard. The adjustable clamping height 0–75 mm enables accommodation of varying workpiece profiles without additional shims, reducing setup time and minimising machine downtime. Where precise positioning is required, the device’s compact geometry supports consistent clamping pressure and alignment, making it suitable for small-batch production and flexible fixture concepts. Fast installation and reliable mechanical connection Designed to accept the supplied M16 clamping screw (M16 x 18 x 160), the unit simplifies installation by combining the clamping element with a compatible fastener ready for immediate use. The overall length 140 mm and width 17 mm provide a compact footprint that fits into common fixture patterns while maintaining the lever arm required for a secure hold. The integrated screw dimensioning gives a straightforward torque-to-clamp translation, enabling a controlled clamp force for stable machining or assembly operations. Streamline workshop inventory and production workflows As a purpose-built fixturing accessory from AMF, this clamp head is intended to integrate easily into existing tooling sets and modular fixturing systems. The compact form and standardised interface reduce the number of specialised parts on the shelf, while the unit’s adaptability supports multiple clamping tasks across different jobs. Metav’s role as a precision partner means access to a broad supply chain, fast replenishment and the reassurance of established quality standards backed by long-term customer trust. For reliable, versatile T‑slot clamping from AMF, contact Metav Werkzeuge to discuss suitability for specific fixtures or to place an order; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833068NW SKU: 4000833068NW Type: No. 6321 Brand: AMF Product type: clamping claw Specifications Clamping height: 0–75 mm T‑slot compatibility: 18 mm Overall length: 140 mm Width: 17 mm Included clamping screw: M16 x 18 x 160 Materials & features Packaging unit: 1 Ready for immediate installation with supplied clamping screw Compact design for modular fixturing Axite enrichment: Spannschraube M16 x 18 x 160; B2: 50 FAQ What T‑slot does this clamping element fit? The clamping component is designed specifically for an 18 mm T‑slot, ensuring compatibility with standard T‑slot tables and fixture plates. What is the adjustable clamping range? The device provides a clamping height of 0–75 mm, enabling secure holding of workpieces with varying thicknesses without additional spacers. Is a clamping screw supplied with the unit? Yes — the product includes an M16 clamping screw (M16 x 18 x 160) to facilitate immediate installation and consistent clamping performance. What are the physical dimensions relevant to fixture design? Key dimensions are overall length 140 mm and width 17 mm, useful for planning fixture layouts and ensuring adequate clearance. Can this clamp be used across different fixture systems? The standardised interface and compact form factor make the item suitable for integration into modular fixture systems where an 18 mm T‑slot is used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Clamping Wedge Nr. 6321 0-75mm Height, M16x16x160 Clamp Screw Included - AMF
Take advantage of a compact clamping solution that fits standard 16 mm T-slots while offering a 0–75 mm clamping range and an included M16 x 16 x 160 clamping screw for immediate use; order via Metav Werkzeuge or consult our technical team for application advice. AMF Clamping Jaw Nr. 6321 — clamping prong for 16 mm T-slots, 0–75 mm clamping height The AMF Clamping Jaw Nr. 6321 is designed for secure workholding on tables with a 16 mm T-slot, offering a compact footprint and a simple mounting concept suitable for a broad range of workshop and industrial fixtures. For 16 mm T-slots Clamp height 0–75 mm Includes M16 x 16 x 160 screw Compact 140 mm length, 17 mm width Precise clamping where standardisation matters The clamping prong is built to match the industry-standard 16 mm T-slot, ensuring compatibility with common machine tables and modular fixtures. The clear specification of the T-slot interface removes ambiguity in procurement and reduces downtime caused by mismatched components. As a result, the component supports consistent part positioning and repeatable clamping force in batch production, contributing directly to throughput reliability and assembly-line stability. Adjustable range reduces set-up iterations With a 0–75 mm clamping range, the device offers measurable flexibility for different workpiece heights without additional adapters. This adjustability translates into fewer tool changes and faster clamping cycles, which benefits small-series manufacturing and custom setups. The straightforward height range also simplifies operator instructions and reduces the need for complex fixtures, improving operational efficiency on the shop floor. Ready to install — fewer parts to manage The package includes a M16 x 16 x 160 clamping screw, enabling immediate installation and use. The inclusion of the screw eliminates an extra procurement step and shortens the time from receipt to first clamping operation. The compact overall dimensions — 140 mm length and 17 mm width — ensure the component fits in constrained work zones and integrates easily into existing clamping arrays without obstructing neighbouring elements. Built for workshop practicality and consistent results The design focuses on a no-frills, robust approach that supports daily use in mechanical workshops and production cells. Clear mechanical specifications and a standardised T-slot interface enable planners to integrate the jaw into modular clamping schemes with confidence. For questions on specific applications or to confirm compatibility with existing fixtures, Metav Werkzeuge’s technical advisors are available to provide clarifications and installation guidance. Order the AMF clamping jaw through Metav Werkzeuge for dependable, standard-compatible clamping — contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical data Article number: 4000833067NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Dimensions & core data Clamping height: 0–75 mm T-slot width: 16 mm Width: 17 mm Overall length: 140 mm Packaging unit: 1 Features & additions Includes clamping screw M16 x 16 x 160 Label: Spannpratze Nr.6321 f. T-Nut 16mm Spann-H.0-75mm UID: 4000833067NW Compact footprint for modular fixtures FAQ Which T-slot size is this clamping jaw made for? The clamping jaw is designed for a 16 mm T-slot, matching standard table profiles used in many fixtures. What is the adjustable clamping height range? The device provides a 0–75 mm clamping range, allowing adaptation to varying workpiece heights. Is a clamping screw supplied with the item? Yes — the delivery includes a M16 x 16 x 160 clamping screw for immediate installation. What are the overall dimensions to check for fit? The component has an overall length of 140 mm and a width of 17 mm, suitable for compact arrangements. Can the clamping jaw be used immediately in a modular clamping system? The AMF clamping jaw is made to integrate with standard 16 mm T-slot systems and includes the required screw for straightforward mounting. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175mm Clamping Wedge for T‑Slot 20mm Height 0-85mm M20x20x200 - AMF
Reliable clamping for 20 mm T‑slots and an adjustable clamping height of 0–85 mm deliver secure workholding; the supplied M20 x 20 x 200 clamping screw simplifies setup and reduces changeover time. Order the component directly via Metav Werkzeuge or consult our advisers for specification support. Clamping bar Nr. 6321 — for 20 mm T‑slot, clamping height 0–85 mm (AMF) The Clamping bar Nr. 6321 is a robust clamp bar designed to secure fixtures and workpieces in 20 mm T‑slots, providing an adjustable clamping height from 0 to 85 mm for flexible machining setups. For 20 mm T‑slot Clamping height 0–85 mm Includes M20 x 20 x 200 clamping screw Length 175 mm, width 21 mm Faster, more reliable workholding for machining operations The combination of an adjustable clamping height 0–85 mm and compatibility with a 20 mm T‑slot translates directly into reduced setup times and steadier machining. The bar’s geometry and the supplied M20 x 20 x 200 clamping screw allow a single, repeatable clamping procedure that secures components evenly across the contact surface. For production environments where cycle time and repeatability matter, this design supports consistent results and fewer re-clamps during batch runs. Simple integration and versatile application across fixtures Designed for straightforward installation into standard machine tables and fixture plates, the bar fits the common 20 mm T‑slot and matches existing clamping arrays. The compact footprint—175 mm overall length and 21 mm width—permits close packing of multiple bars for complex fixturing, while the adjustable range gives flexibility for variable workpiece heights. This reduces the need for special adapting parts and streamlines tool planning in general workshop and industrial contexts. Durable build for dependable industrial performance Manufactured for repetitive use, the component supports stable clamping without excessive maintenance. The measured design minimises flex under load, helping to preserve machining accuracy over time. Where precision and safety are required, the robust construction contributes to fewer stoppages and consistent part quality, aligning with common shop-floor expectations for long-term reliability. For purchasing guidance on the AMF clamping solution and fast fulfilment from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000833069NW Type: Nr. 6321 Product type: Clamping bar Manufacturer: AMF Packaging unit: 1 Dimensions / Core specifications Width: 21 mm Overall length: 175 mm Clamping height: 0–85 mm T‑slot compatibility: 20 mm Features / Accessories Included clamping screw: M20 x 20 x 200; B2: 60 Suitable for standard machine tables and fixture plates Compact design for dense fixturing FAQ What T‑slot size does this clamping bar fit? The clamping bar fits a 20 mm T‑slot; compatibility is specified for standard 20 mm table slots. What is the adjustable clamping height range? The clamping height ranges from 0 to 85 mm, enabling a wide variety of workpiece thicknesses to be secured. Is the clamping screw included with the unit? Yes, the delivery includes an M20 x 20 x 200 clamping screw as stated in the product details for the AMF clamping bar (SKU 4000833069NW). Can multiple bars be used together on a table? The compact 21 mm width and 175 mm length allow several bars to be mounted closely for multi-point fixturing and complex workholding arrangements. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Spannpratze SPE f.T-Nut 12mm M10x50mm RÖHM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 14mm M12x55mm RÖHM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 16mm M12x60mm RÖHM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 18mm M16x60mm RÖHM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 22mm M16x65mm RÖHM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com