150mm Axial Tool Holder C2 DIN 69880 Left-Hand Outer Coolant Feed, H1 20mm - TECWERK
Take advantage of the combination of industrial compatibility, reliable coolant management and compact dimensions for smooth tool changeovers and consistent process results. Benefit from the left‑hand orientation and Form C2 interface when setting up for specialised turning tasks. Order the axial tool holder directly via Metav Werkzeuge or ask our consultants if needed. Axial tool holder C2 DIN 69880 VDI30 (left‑hand) by TECWERK — Form C2, external coolant supply A Axial tool holder C2 DIN 69880 VDI30 (left‑hand) by TECWERK engineered for precision turning and automated lathe setups, providing external coolant supply and a DIN‑standard interface for secure mounting. Form C2 compatibility with DIN 69880 Left‑hand orientation for reverse operations External coolant supply for improved cooling VDI30 taper for standardised tool mounting Stable interface and predictable machining results The VDI30 taper and adherence to DIN 69880 ensure a repeatable and secure connection between turret and holder, reducing run‑out and vibration during machining. With Form C2 geometry the holder provides a defined seating face and clamping surface, which simplifies changeover procedures and maintains concentricity at the tool tip. The combination of standardised taper and form means compatibility with a wide range of tool bodies and adapters used in industrial turning centres, supporting consistent surface finish and dimensional accuracy across production batches. Improved cooling flow for longer tool life and consistent finishes An external coolant supply (outer coolant feed) directs cutting fluid close to the cutting zone, supporting chip evacuation and heat control even at higher spindle speeds. This targeted coolant delivery improves edge stability and can reduce thermal expansion effects on the tool and workpiece, which in turn helps to preserve tool geometry and prolong service intervals. For operations where material removal rates and surface integrity matter, the coolant routing reduces thermal load and contributes to repeatable part quality. Compact dimensions that aid rigidity and repeatability Key measures such as d1: 30 mm, h1: 20 mm and l1: 70 mm define the holder’s compact profile and effective overhang, influencing stiffness and deflection under cutting forces. Additional dimensions (b4: 76 mm, h5: 28 mm, b5: 41 mm, b6: 23 mm, h6: 38 mm, l2: 10 mm) describe the mounting geometry that determines clearance, tool projection and turret compatibility. These specifications help planners and machinists assess whether the holder meets the required setup envelope and whether the chosen insert and tool body will retain the necessary rigidity for stable cuts. Integration into workshop workflows and practical advantages Designed for standard turret systems, the holder supports predictable setup times and repeatable alignment that benefit small series and industrial production alike. The left‑hand orientation caters to reverse‑hand tools or specific contouring tasks without the need for complex retooling. The standardised interface and coolant provision simplify integration, helping to reduce downtime during tool changes and making the holder a pragmatic choice for workshops seeking reliable, industrial‑grade tooling components. For precise left‑hand turning operations, ask Metav Werkzeuge for the TECWERK axial tool holder with Form C2 and external coolant supply — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss suitability and availability. Technical data SKU: 2000833655NW Label: Axialwerkzeughalter C2 DIN 69880 VDI30 li.TECWERK Manufacturer: TECWERK Product type: Axial tool holder Packaging unit: 1 Dimensions & key measures h1: 20 mm b4: 76 mm d1: 30 mm h5: 28 mm b5: 41 mm b6: 23 mm h6: 38 mm l2: 10 mm l1: 70 mm Special features Form C2 left‑hand orientation outer coolant feed (external coolant supply) DIN 69880 compliance VDI30 taper FAQ What standard interface does this holder use? The axial tool holder uses the DIN 69880 standard with a VDI30 taper for secure turret mounting. Is the coolant delivered internally or externally? Coolant is supplied externally; the holder features an outer coolant feed directed towards the cutting zone. For which hand orientation is the holder designed? This tool holder is manufactured as a left‑hand variant, suitable for reverse‑hand or specific turning tasks. Which dimensions determine its overhang and rigidity? Key measures such as d1: 30 mm, h1: 20 mm and l1: 70 mm characterise overhang and stiffness for setup and process planning. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Axial Tool Holder C4 Left Overhead External Coolant, DIN 69880 - TECWERK
A robust combination of Form C4 geometry, left‑hand orientation and external coolant feed delivers repeatable clamping, efficient cooling and dependable performance for overhead machining; order the axial tool holder directly via Metav Werkzeuge or request specialist advice from their consultants. Axial Tool Holder C4 DIN 69880 VDI40 – left‑hand, overhead (TECWERK) The Axial Tool Holder C4 DIN 69880 VDI40, left‑hand overhead is a VDI40 toolholder designed for secure mounting in spindle systems, offering external coolant supply for improved chip control and machining stability Form C4 for compact axial positioning Left‑hand orientation for specific tooling External coolant feed for improved cooling DIN 69880 compliant for VDI40 spindles Stable, repeatable mounting for VDI40 spindles Engineered to the DIN 69880 specification and compatible with VDI40 interfaces, this toolholder provides a stable connection between spindle and cutting tool. The Form C4 geometry ensures axial positioning with minimal runout, which increases repeatability during serial production. Reduced radial movement translates into consistent component tolerances and less rework, making the holder suitable for demanding turning and milling operations where positioning accuracy is essential. Effective cooling and cleaner chip flow for longer tool life The overhead configuration with external coolant feed directs cutting fluid close to the cutting zone while preserving the holder’s clamping integrity. Supplying coolant externally supports efficient heat removal and improved chip evacuation in interrupted cuts or difficult materials. The result is extended tool life and a more consistent surface finish, particularly when machining alloys where thermal control prevents premature wear and built‑up edge formation. Compact dimensions for easy integration and fast setup With measured dimensions such as h1 25 mm, b4 90 mm, d1 40 mm and l1 85 mm, the holder fits standard VDI40 tool turrets and reduces installation time during tool changes. The overhead design and precise contours help maintain clearance in constrained setups while keeping the coolant channel accessible. Standardised mounting and the clear technical specification facilitate part interchangeability across machines and support efficient workshop logistics. Contact Metav Werkzeuge for tailored integration advice or request the Axial Tool Holder directly from Metav Werkzeuge for immediate supply and technical consultation Technical Data Article number: 2000833660NW Label: Axialwerkzeughalter C4 DIN 69880 VDI40 li.Überkopf TECWERK Product type: Axial tool holder Manufacturer: TECWERK Packaging unit: 1 UID: 2000833660NW Dimensions & measurable data h1: 25 mm b4: 90 mm d1: 40 mm h5: 48 mm b5: 47.5 mm b6: 25.5 mm h6: 42.5 mm l2: 12.5 mm l1: 85 mm Special features Form: C4 Left‑hand orientation Overhead configuration External coolant feed Standard: DIN 69880 Interface: VDI40 FAQ What spindle interface does this holder use? The axial tool holder is designed for the VDI40 interface and conforms to DIN 69880, ensuring compatibility with VDI40 turret systems. Is coolant supplied internally or externally with this holder? Coolant is provided via an external coolant feed; the holder is configured for overhead coolant routing to support effective heat control. Which dimensions are relevant for machine fitting? Key dimensions include h1 25 mm, d1 40 mm and l1 85 mm, which determine axial position and clearance in the turret. Can this holder handle right‑handed and left‑handed tooling? This variant is left‑hand oriented; right‑hand tooling requires the corresponding right‑hand version or alternative orientation. What is the SKU for ordering and reference? Reference SKU 2000833660NW for procurement and technical documentation when sourcing the TECWERK axial tool holder. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
70mm Axial Tool Holder C1 DIN 69880 External Coolant Right-Hand, H1 20mm - TECWERK
Take advantage of the combination of C1 form compatibility, external coolant feed and a VDI30 interface for consistent, high-throughput machining. Order the axial tool holder directly via Metav Werkzeuge or ask our consultants for application support. Axial Tool Holder C1, DIN 69880 VDI30 (right-hand) — TECWERK The Axial Tool Holder C1 DIN 69880 VDI30 (right-hand) is a precision spindle-mounted toolholder designed for axial tooling operations with external coolant supply and DIN 69880 flange compatibility. Right-hand C1 form, DIN 69880 compatible External coolant feed for tool lubrication VDI30 interface for secure spindle mounting Compact dimensions: h1 20 mm, l1 70 mm Consistent mounting for repeatable machining results The holder is engineered to meet the DIN 69880 specification and interfaces via VDI30, which together deliver a defined clamping geometry and precision alignment. This results in improved repeatability between tool changes and reduced setup variance on serial production runs. For production environments where cycle-time and part tolerance are critical, the standardised flange and interface reduce spindle wear and ensure predictable tool positioning across shifts. External coolant feed to extend tool life and improve finishes The integrated external coolant feed supplies cutting fluid directly to the tool shank, supporting effective cooling and improved chip evacuation. Better cooling reduces thermal growth in the cutting zone, which helps maintain dimensional stability and prolong tool life. For aluminium, steels or mixed-material batches, the directed coolant feed supports cleaner cuts and more consistent surface finish, reducing downstream rework and increasing first-time-right yields. Compact footprint and clear dimensional compatibility With a compact footprint and defined dimensions such as h1: 20 mm and l1: 70 mm, the toolholder fits efficiently in standard VDI turrets and spindle adapters. The C1 form designation ensures compatibility with machines expecting this geometry, while the VDI30 interface provides a familiar mounting for many lathes and machining centres. The compact design aids in reduced overhang, which in turn lowers bending moments and improves stability during axial cutting operations. Practical handling, installation and production benefits The combination of standardised flange geometry and precise measured dimensions simplifies installation and inspection. The clear dimensional data allow engineering teams to verify run-out tolerances and adapt process parameters without lengthy trial runs. While the holder is designed for industrial use, maintenance remains straightforward thanks to the accessible coolant channel and robust construction, supporting consistent uptime in high-mix or continuous production environments. For tailored advice on integrating TECWERK axial tool holders into existing VDI30 systems or for supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by email or phone to discuss specifications and delivery options. Technical data Article number: 2000833653NW Product: Axial tool holder C1 DIN 69880 VDI30 right-hand Brand: TECWERK Core dimensions h1: 20 mm h5: 28 mm h6: 38 mm b1: 70 mm b2: 35 mm b3: 17 mm d1: 30 mm l1: 70 mm l2: 10 mm Features Form: C1 Orientation: right-hand Coolant: external coolant feed Standard: DIN 69880 Interface: VDI30 Packaging unit: 1 FAQ What machines is this toolholder compatible with? The axial tool holder C1 DIN 69880 VDI30 (right-hand) is compatible with spindles and turret systems that accept the DIN 69880 flange and VDI30 interface, making it suitable for many lathes and machining centres that follow these standards. Does the holder support coolant-through tooling? Yes. The holder features an external coolant feed, which supplies coolant to the tool shank externally and aids cooling and chip control during axial cutting operations. Which dimensions are most relevant for integration checks? Key dimensions for integration are h1: 20 mm and l1: 70 mm, alongside the flange geometry defined by C1 form and the VDI30 interface to ensure correct mounting and minimal overhang. Is the product suitable for high-volume production? Designed for consistent repeatability and a standardised flange interface, the TECWERK axial tool holder is well suited to high-volume production where reliable tool mounting and coolant management improve uptime and part quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
70mm Axial Tool Holder C3 DIN 69880 Right-Hand Overhead External Coolant - TECWERK
Benefit from the combination of Form C3, DIN 69880 / VDI30 compliance and an external coolant feed for consistent, repeatable axial clamping in CNC production; order the holder via Metav Werkzeuge or consult our specialists for integration advice. Axial tool holder C3 (DIN 69880, VDI30) — right‑handed, overhead, external coolant — TECWERK The Axial tool holder C3 (VDI30, DIN 69880) is a right‑handed, overhead orientation holder designed for axial clamping with an external coolant feed, suitable for standardised CNC toolholding systems. Form C3 right‑handed design External coolant supply Complies with DIN 69880 VDI30 h1 20 mm axial length Precision and standardised compatibility for reliable production This axial tool holder delivers repeatable clamping through its Form C3 geometry and adherence to DIN 69880 and VDI30 specifications, ensuring compatibility with machines and turrets that rely on standard tool interfaces. The standard conformity reduces setup times and prevents mismatch errors during tool changes. By using a holder built to established norms, workshops gain predictable runout behaviour and easier integration into existing tool‑management routines, supporting tight tolerances and stable process control. Enhanced cooling and longer tool life through external coolant The external coolant feed directs coolant efficiently along the tool shank and cutting zone, improving heat dissipation and chip evacuation under heavy axial loads. This results in reduced thermal deformation and extended insert life for many milling and turning operations. The design supports consistent cutting conditions during extended cycles, which translates into fewer tool interventions and higher effective machining uptime—advantages that are particularly relevant for batch production and mixed‑model schedules. Clear mounting dimensions for straightforward machine integration Key measures such as h1: 20 mm, d1: 30 mm and l1: 70 mm provide a concise reference for machine compatibility checks and fixture planning. These numerical values allow technicians to verify turret clearance, axial reach and the required envelope before commissioning. The holder’s form reduces ambiguity during procurement and ensures that replacement items meet the original machine interface—minimising downtime and simplifying stock management for toolrooms and production planners. Operational benefits and why this TECWERK option is suitable for workshops Selecting this TECWERK holder delivers pragmatic advantages: dependable mechanical interface, standardised fitment and improved coolant management. For purchasing and maintenance teams, the combination of standard compliance and measured dimensions simplifies spare‑parts strategies and supports predictable maintenance intervals. Metav Werkzeuge acts as a reliable distribution partner with an extensive product range and local stock in Emmerich, enabling rapid replenishment and technical clarification when required. For application advice, availability and order placement of the TECWERK axial tool holder (SKU 2000833657NW), contact Metav Werkzeuge — specialists for precision toolholding and workshop supply, ready to assist with selection and compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000833657NW Label: Axialwerkzeughalter C3 DIN 69880 VDI30 re.Überkopf TECWERK Brand: TECWERK Product type: Axial tool holder Dimensions & measurable data h1: 20 mm b2: 35 mm d1: 30 mm h5: 38 mm b3: 17 mm h6: 35 mm l2: 10 mm l1: 70 mm b1: 70 mm Features & standards Form: C3 Orientation: right‑handed, overhead Coolant: external coolant supply Standard: DIN 69880, VDI30 Package unit: 1 FAQ What standards does the holder meet? The holder conforms to DIN 69880 and VDI30, ensuring standardised interface and interchangeability; the Axial tool holder C3 is manufactured to these norms. Is the holder suitable for overhead mounting and right‑hand applications? Yes, the design is right‑handed with an overhead orientation, which is specified for the Axial tool holder C3 and supports appropriate turret or spindle configurations. How does the external coolant feed affect machining performance? The external coolant feed improves heat removal and chip evacuation at the cutting edge, which helps maintain cutting conditions and supports longer tool life when using the axial holder. Which dimensions are most important for machine compatibility checks? Critical measures include h1: 20 mm, d1: 30 mm and l1: 70 mm; these dimensions are used to confirm turret clearance and axial reach for the Axial tool holder C3. What is the SKU and packaging unit for ordering? The SKU is 2000833657NW and the item is supplied as package unit 1 for the TECWERK axial tool holder. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
70mm Axial Tool Holder C4 Left Overhead External Coolant DIN 69880 - TECWERK
Take advantage of the combination of precise DIN 69880 interface, left-hand overhead orientation and external coolant feed for consistent machining results; order the axial tool holder directly via Metav Werkzeuge or ask our consultants if needed. Axial tool holder C4, DIN 69880 VDI30 (left-hand, overhead) – TECWERK The Axial tool holder C4 VDI30 (left-hand, overhead) is a precision clamping solution for CNC turning and milling applications that require a left-hand orientation and external coolant feed for improved chip evacuation. *Form C4 for compact axial positioning *Left-hand orientation for reverse operations *External coolant supply for enhanced cooling *Compliant with DIN 69880 VDI30 interface Reliability from the standardised interface The DIN 69880 connection with VDI30 interface ensures repeatable axial alignment and secure clamping in tool turrets and heads. Standardisation reduces set-up time and the risk of misfits when swapping holders, which keeps machining tolerances consistent across production batches. The specification Form C4 describes the axial geometry and seating that deliver stable support during radial loads; this results in fewer reworks and predictable tool life, a clear advantage for precision-oriented workshops and subcontract manufacturers. Designed for left-hand, overhead machining with active cooling A left-hand, overhead configuration provides reliable clearance and orientation for operations where reverse rotation or specific tool geometry is required. The integrated external coolant supply channels coolant towards the cutting zone for improved temperature control and chip flushing, which helps maintain tool performance under prolonged cutting. Key dimensions such as h1: 20 mm and l1: 70 mm inform the effective reach and axial positioning, supporting correct tool projection and minimising chatter in hard-to-access set-ups. Compact dimensions for fast changeovers and stable mounting Compact measurements and defined seating keep changeovers efficient. Critical dimensions such as b4: 76 mm, d1: 30 mm and l2: 10 mm indicate the envelope and mounting interfaces, enabling planners to verify clearance and turret compatibility quickly. The overhead orientation and measured profile help to balance rigidity with accessibility, reducing fixture conflicts and enabling quicker manual interventions when required. Delivered as a single unit per packaging, the holder is suited for workshops aiming to streamline tooling inventories without sacrificing machine uptime. Contact Metav Werkzeuge today to confirm compatibility with existing VDI30 systems or to request procurement of the TECWERK axial tool holder with DIN 69880 interface Technical data Article number: 2000833659NW Label: Axial tool holder C4 DIN 69880 VDI30 left-hand overhead TECWERK Product type: Axial tool holder Manufacturer: TECWERK Packaging unit: 1 Dimensions & measurable data h1: 20 mm b4: 76 mm d1: 30 mm h5: 38 mm b5: 41 mm b6: 23 mm h6: 35 mm l2: 10 mm l1: 70 mm Features & standards Form: C4 Orientation: left-hand Mounting: overhead Coolant: external coolant supply (outer feed) Standard: DIN 69880 Interface: VDI30 FAQ Is this holder compatible with standard VDI30 turrets? The axial tool holder C4 complies with the DIN 69880 specification and the VDI30 interface, so it is suitable for standard VDI30 turrets when the turret accepts left-hand overhead holders. Can the holder be used where external coolant is required? Yes, the TECWERK axial holder features an external coolant supply designed to direct coolant towards the cutting zone for improved chip removal and cooling. What does Form C4 mean for mounting and rigidity? Form C4 describes the axial seating geometry and axial positioning of the holder; the design promotes stable clamping and predictable axial support during machining. Are the listed dimensions sufficient to check fitment in a turret or tool head? The provided dimensions such as h1, l1 and b4 enable planning for clearance and tool projection to confirm fitment in a turret or tool head. Is the holder suitable for reverse or left-handed operations? Yes, the left-hand orientation of the holder is intended for reverse or left-handed tool arrangements where such orientation is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Axial Tool Holder C1 DIN 69880 Right-Hand External Coolant 25mm H1 - TECWERK
Take advantage of the combination of DIN 69880 compatibility, a VDI40 shank and external coolant routing for reliable tool clamping and extended tool life; order the axial tool holder directly via Metav Werkzeuge or consult the technical team for fitment advice. Axial tool holder C1 DIN 69880 VDI40, right-hand — TECWERK The Axial tool holder C1 DIN 69880 VDI40 (right-hand) is a precision clamping component for VDI40 turret systems, designed to provide secure axial mounting and an external coolant supply for improved machining stability DIN 69880 standard interface VDI40 shank for secure mounting External coolant supply for cooling Form C1 right-hand configuration Precision and compatibility for modern turret systems The axial holder is engineered to the DIN 69880 interface, which ensures repeatable seating and secure clamping in turret heads and tool posts. Built for the VDI40 standard, this holder delivers a consistent connection between the spindle and the cutting tool, reducing runout and improving repeatability. The mechanical fit is critical in batch production and automated turning cells, where stable positioning directly translates into fewer rejects and less setup time. Coolant routing that protects tools and processes An external coolant supply provides targeted cooling along the spindle axis, helping to evacuate chips and reduce thermal load at the cutting edge. This routing contributes to longer tool life and steadier surface finishes, particularly in materials prone to work hardening. By controlling temperature and chip flow, the holder supports higher productivity and fewer tool changes, which benefits throughput and overall machining economy. Compact dimensions and installation advantages for workshop use With compact geometrical data and a Form C1 right-hand profile, the holder merges space-saving design with ease of integration. The clearly defined dimensions support straightforward verification against turret geometry and tool overhang limits, aiding planning for fixture arrangement and collision checks. For customers seeking dependable repeatability, the combination of a standardised interface and compact form factor simplifies retrofitting and spare-part management. Contact Metav Werkzeuge in Emmerich for tailored technical advice and secure procurement of the TECWERK axial tool holder; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000833654NW Label: Axial tool holder C1 DIN 69880 VDI40 right-hand Product type: Axial tool holder Manufacturer: TECWERK Data h1: 25 mm b2: 42.5 mm d1: 40 mm h5: 32.5 mm b3: 21 mm h6: 48 mm l2: 12.5 mm l1: 85 mm b1: 85 mm Special features Form C1 right-hand configuration external coolant supply Norm: DIN 69880 VDI40 interface FAQ What interface does this holder use? The axial holder uses the DIN 69880 interface and a VDI40 shank to ensure standardised mounting and repeatable clamping. Is the coolant routed internally or externally? This model provides an external coolant supply, which directs cooling along the holder axis to support chip evacuation and tool life. Can the holder be used on automated turret systems? Yes, the holder is suitable for turret-mounted tool stations that accept a VDI40 interface and require axial clamping. Which dimensions are relevant for installation checks? Key installation dimensions include l1: 85 mm, d1: 40 mm and the various h/b values listed in the technical data, which help verify clearance and overhang limits. What should be checked before retrofit? Confirm turret compatibility with VDI40 seating and the DIN 69880 standard; verify the right-hand Form C1 orientation matches the intended tool geometry and coolant routing. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Axial Tool Holder C2 DIN 69880 Left Side Coolant Supply, Form C2 25mm H1 40mm D1 - TECWERK
Take advantage of the VDI40 interface, robust Form C2 construction and precise dimensional fit to maintain process stability and minimise setup time; order the axial tool holder directly via Metav Werkzeuge or ask our consultants if needed Axial tool holder C2 DIN 69880 VDI40 (left-hand) – TECWERK, outer coolant feed The axial tool holder C2 DIN 69880 VDI40 li. is a left-hand, standardised holder for machines with a VDI40 interface, designed for reliable axial tool clamping and coolant-guided machining Left-hand orientation, Form C2 Outer coolant supply for directed cooling Conforms to DIN 69880 standard VDI40 interface for repeatable seating Reliable fit and repeatability for VDI40 systems The Axial tool holder C2 DIN 69880 VDI40 li. is engineered to meet the DIN 69880 specification, providing a consistent VDI40 interface that reduces assembly variation and limits runout. The Form C2 geometry and precise diameters mean machines and driven toolposts achieve predictable concentricity; this translates into stable cutting conditions and reduced rework rates. When matched to suitable spindles, the holder’s defined contact surfaces ensure repeatable positioning across tool changes, improving cycle-to-cycle consistency in production. Improved cooling control to extend tool life With an outer coolant supply, coolant is directed externally to the cutting zone rather than through the tool body, supporting efficient chip evacuation and surface cooling without altering the internal holder routing. This configuration aids thermal management during demanding cuts and contributes to longer tool life and steadier surface finish. The combination of coolant routing and the holder’s structural design helps maintain dimensional accuracy over prolonged runs, which is particularly beneficial in serial production where downtime and tool consumption must be controlled. Clear selection criteria and straightforward integration Key dimensions such as h1: 25 mm, d1: 40 mm and l1: 85 mm provide measurable parameters for compatibility checks when specifying holders for machine tool setups. The left-hand orientation and Form C2 designation should be matched with the machine’s driven-tool requirements and the intended tool geometry to ensure proper seating and clearance. Maintenance routines remain uncomplicated due to the external coolant approach; regular inspection of contact faces and coolant passages supports consistent performance. Procurement and workshop planners gain assurance from the holder’s adherence to recognised standards, easing qualification and inventory management. For workshops seeking a robust VDI40 axial solution, contact Metav Werkzeuge to specify the TECWERK axial tool holder C2 with outer coolant feed and confirm fitment for the intended machine — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 2000833656NW Label: Axial tool holder C2 DIN 69880 VDI40 li. TECWERK Manufacturer: TECWERK Product type: Axial tool holder Facts h1: 25 mm b4: 90 mm d1: 40 mm h5: 32.5 mm b5: 47.5 mm b6: 25.5 mm h6: 48 mm l2: 12.5 mm l1: 85 mm Special features Form: C2 Orientation: left-hand Coolant: outer coolant supply Standard: DIN 69880 Interface: VDI40 FAQ What machines are compatible with this holder? Machines using a VDI40 interface and compliant with DIN 69880 are compatible with the TECWERK axial tool holder C2; match the specified dimensions to the machine tool’s driven tool mounting. Does the holder provide internal coolant-through capability? This variant features an outer coolant supply, which directs coolant externally rather than through the holder’s internal bore. How does the left-hand orientation affect tool selection? Left-hand orientation determines the direction of axial positioning and must be paired with toolholders and tools designed for left-handed operation; check h1, d1 and l1 against the tool geometry. Which measurements are most important when verifying fit? Critical dimensions include d1: 40 mm for seating diameter, h1: 25 mm for contact height and l1: 85 mm for overhang; these ensure correct clearance and concentricity. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Axial Tool Holder C3 DIN 69880 VDI40 Right Overhead External Coolant - TECWERK
Take advantage of the secure, standardised VDI40 mounting and the external coolant supply for consistent cycle times and longer tool life; order the Axial tool holder C3 DIN 69880 VDI40 (right‑hand, overhead) directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Axial tool holder C3 — VDI40, DIN 69880, external coolant The Axial tool holder C3 DIN 69880 VDI40 (right‑hand, overhead) is a VDI40 axial holder for precision tool mounting in milling spindles, designed for overhead orientation and outer coolant feed VDI40 shank, compliant with DIN 69880 Form C3, right‑hand, overhead orientation External coolant supply for improved cooling Compact dimensions for tight spindle spaces Consistent, standardised mounting for reliable production The VDI40 interface and conformity to DIN 69880 ensure repeatable positioning and rapid changeover across compatible spindles. This standardised approach reduces setup variance and supports predictable machining cycles, which is essential for batch production. The axial configuration suits operations that require axial alignment and consistent clamping behaviour, helping to maintain tolerances and reduce rework. Improved cooling and tool life through external coolant Built with an external coolant supply, the holder channels coolant close to the cutting edge to reduce temperatures and improve chip evacuation. For high‑duty milling, optimised coolant delivery can translate directly into extended insert life and steadier cutting conditions. The Form C3 orientation combined with external coolant is particularly advantageous where chip control and thermal stability determine machining quality. Space‑efficient design for compact spindles and fixtures With compact dimensions such as l1 85 mm and h1 25 mm, the axial holder is suitable for machines and fixtures where space is at a premium. The restrained footprint enables integration into dense tool layouts without compromising the tool overhang or accessibility. This compact design supports tighter tool zoning and can help to simplify fixture design while maintaining secure clamping and alignment. Compatibility and practical integration in workshops The holder is engineered for straightforward integration with VDI40 tool systems and follows the DIN standard to aid compatibility checks. Dimensional references provided (for example h1 25 mm, b1 85 mm) assist in verifying fitment against spindle and turret dimensions. For procurement and planning, the standardised form factor streamlines stocking decisions and supports predictable tool management within production workflows. Contact Metav Werkzeuge for expert advice on integrating the TECWERK axial tool holder into existing VDI40 setups and to confirm compatibility with specific spindle layouts Technical Data Article number: 2000833658NW SKU: 2000833658NW Product type: Axial tool holder Label: Axialwerkzeughalter C3 DIN 69880 VDI40 re.Überkopf TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000833658NW Facts h1: 25 mm b2: 42.5 mm d1: 40 mm h5: 48 mm b3: 21 mm h6: 42.5 mm l2: 12.5 mm l1: 85 mm b1: 85 mm Special features Form C3 Right‑hand, overhead orientation Outer coolant feed / external coolant supply Norm: DIN 69880 VDI40 shank FAQ What spindle interface does this holder use? The holder uses a VDI40 shank in accordance with DIN 69880, ensuring compatibility with standard VDI40 spindles. Is coolant supplied through the holder? Yes, the design includes an external coolant supply, which directs coolant close to the cutting area to aid cooling and chip evacuation. Which orientation and form does the holder have? The tool holder is Form C3, right‑hand and configured for overhead use, suitable for axial mounting arrangements. What are the key dimensions to check for installation? Critical references include l1 85 mm and h1 25 mm; consult the Facts section to verify fitment against spindle and turret geometry. Can this holder be used for tight tool layouts? The compact dimensions and standardised VDI40 interface make the holder appropriate for confined spindle spaces while maintaining secure clamping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com