100mm Stud Bolt M10 Heat Treated 10.9, DIN 6379 - AMF
Benefit from a combination of standard compliance, high tensile strength and precise dimensions for reliable mechanical joins. The AMF stud bolt delivers consistent performance in machinery and structural assemblies; order directly via Metav Werkzeuge or consult our advisors for specification matching. AMF stud bolt DIN 6379 — M10 x 100 mm, strength class 10.9 The AMF stud bolt DIN 6379 is a high-strength fastening element designed for secure machine and structural connections where standard conformity and consistent thread engagement are required. DIN 6379 standard compliance Heat-treated to strength class 10.9 Metric thread M10 for standard fittings Secure connections through standardised strength The stud is manufactured to meet DIN 6379, guaranteeing compatibility with common industrial fittings and replacement parts. Its 10.9 heat-treated specification provides a high tensile strength that reduces the risk of fastener failure under load, delivering measurable reliability for bolted joints. This specification translates into fewer unscheduled maintenance intervals and longer service life for assemblies, which supports predictable production planning and lowers lifecycle disruption. Precision dimensions for consistent assembly With a defined M10 thread and an overall length of 100 mm, the fastener ensures predictable thread engagement and clamping behaviour. The measured width across tool flats of 13 mm enables standard spanner use and repeatable torque application. Consistent dimensions simplify assembly processes and reduce variation in clamping forces, which is particularly beneficial in repetitive production environments and when interchangeability with DIN-compliant components is required. Durable performance and suitable applications Heat treatment to class 10.9 enhances both tensile and yield characteristics while preserving thread geometry for reliable torque transmission. The component is ideal for mechanical assemblies, fixtures and machine construction where a strong, corrosion-resistant coating is not specified in the data. When used in appropriately matched materials and joint designs, the bolt supports durable clamping and stable joint stiffness, contributing to overall system longevity without frequent replacement. For secure, standards-compliant fastenings, request the AMF stud bolt via Metav Werkzeuge — technical advice and order support are available from Metav Werkzeuge GmbH in Emmerich; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: 4000833253NW Brand: AMF Product type: Stud bolt Measurements Thread: M10 Overall length: 100 mm Width across flats / tool size: 13 mm Additional dimension: b: 75 Features Standard: DIN 6379 Strength class: 10.9 (heat-treated) Packaging unit: 1 FAQ What load capacity does the stud bolt offer? The AMF stud bolt specified to strength class 10.9 provides high tensile and yield values suitable for demanding mechanical joints; exact load ratings depend on joint design and mating materials. Is this fastener compatible with standard M10 nuts and fittings? Yes, the metric M10 thread and adherence to DIN 6379 ensure compatibility with standard M10 nuts and DIN-compliant components. Can the stud bolt be used in structural machine assemblies? The stud bolt is intended for machine and structural connections where 10.9 strength and standardised dimensions are required; verify joint calculations for the specific application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stud Bolt M12x100 Hardened 10.9, DIN 6379 - AMF
Take advantage of a standardised, high‑strength fastening solution with predictable dimensions and reliable clamping force; the combination of DIN 6379 compliance, M12 threading and property class 10.9 hardness supports secure assemblies and consistent installation. Order directly via Metav Werkzeuge or consult our specialists for application advice. AMF Stud Bolt DIN 6379 M12 x 100 mm, Grade 10.9 The AMF Stud Bolt DIN 6379 M12 x 100 mm is a hardened, threaded stud designed for standardised industrial and mechanical fastening where consistent geometry and elevated strength are required. DIN 6379 standardised geometry M12 x 100 mm threaded stud Hardened to property class 10.9 Precision-manufactured by AMF Consistent strength and standard conformity for dependable assemblies Compliance with DIN 6379 ensures a standardised stud geometry that simplifies component selection and guarantees interchangeability across fixtures and mating parts. The M12 thread and 100 mm overall length provide a common, versatile size for through-bolting and clamping arrangements, while the property class 10.9 rating indicates a tempered steel grade engineered for high tensile performance. This combination reduces uncertainty during procurement and supports repeatable torque and preload behaviour in production and maintenance settings. Streamlined installation and inventory advantages A threaded stud format reduces the need for multiple bolt variants and enables flexible assembly strategies such as using nuts and washers to adapt to different joint designs. The standard M12 thread profile simplifies matching with commonly stocked nuts and threaded components, improving process efficiency and minimising downtime caused by part mismatch. Precision manufacture ensures consistent thread fit and engagement, which in turn supports accurate torque application and predictable clamping results without unnecessary trial and error. Robust construction with practical handling benefits The stud is quenched and tempered to achieve the 10.9 property class, delivering enhanced yield and tensile strength compared with lower grades. This makes it suitable for demanding mechanical connections where higher clamping forces are required. As a component from AMF, the stud bolt is produced to industrial tolerances that favour long service life and reduced maintenance frequency. Its clear specification and uniform dimensions also aid quality control processes, allowing fast verification and fewer assembly errors. Secure robust, standard-compliant fastening with AMF’s Grade 10.9 stud — contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833260NW Label: Stiftschraube DIN6379 M12x100mm vergütet auf 10.9 AMF SKU: 4000833260NW Core dimensions Thread: M12 Overall length: 100 mm Width: 15 Packaging unit: 1 Materials & features Brand: AMF Standard: DIN 6379 Property class: 10.9 Finish: tempered (vergütet) Additional: Addition: b: 63 FAQ What does DIN 6379 mean for fit and interchangeability? DIN 6379 defines the stud geometry and thread form so the stud offers predictable fitment and interchangeability with compatible components adhering to the same standard. Is this stud suitable for high‑load applications? Yes, the stud is rated property class 10.9, which denotes a quenched and tempered steel grade designed for elevated tensile and yield strength compared with lower classes. What are the exact thread and length specifications? The stud features an M12 thread with an overall length of 100 mm, as specified on the article label and SKU 4000833260NW. How is the surface treated or finished? The product is supplied tempered to achieve the 10.9 classification; any further surface treatment details are not specified in the provided data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stud Screw DIN 6379 Heat Treated 10.9, M8 Thread - AMF
Combining high tensile strength with standard conformity and a compact M8×100 mm format ensures dependable fixation and reduced maintenance in serial production; order the component directly via Metav Werkzeuge or ask the consultants for application-specific advice. Stud screw DIN 6379 M8×100 mm — hardened property class 10.9 by AMF The Stud screw DIN 6379 M8×100 mm is a hardened industrial fastener manufactured to DIN 6379 for reliable axial locating and secure mechanical joints in machinery and assemblies. Hardened to property class 10.9 Conforms to DIN 6379 standard M8 thread, 100 mm overall length Industrial-grade axial fastening Proven strength for load-bearing fastenings The stud is supplied hardened to property class 10.9, delivering elevated tensile strength and improved yield for demanding applications. This higher material grade reduces the risk of elongation under preload and improves joint integrity in repetitive load cycles. By specifying a DIN 6379 component, the fastener meets defined geometric and mechanical tolerances, which simplifies quality control and inspection procedures on the shop floor. The combination of heat treatment and precise thread geometry supports predictable clamping behaviour and longer service intervals. Standard format for straightforward assembly and interchangeability Engineered with an M8 thread and an overall length of 100 mm, this fastener integrates into common assembly patterns and replacement stocks without additional adaptation. The standardized dimensions facilitate rapid selection from inventory and reduce setup time on production lines. Where traceability and conformity matter, the DIN reference provides clear criteria for procurement and incoming inspection. The fastener’s 11 mm width and the specified addition parameter help determine seating and engagement depths during installation, enabling consistent torque application and reliable preload. Practical supply and compatibility advantages for workshops Selection of a standardised, hardened stud from a recognised maker such as AMF minimises downtime through predictable performance and simplified maintenance planning. The product’s packaging unit supports single-piece usage and straightforward stock keeping for spare-part management. Choosing standardised components reduces the number of special parts in a facility, streamlines ordering and ensures compatibility across similar assemblies. The result is lower operational complexity and improved process reliability for production and service operations. Select AMF quality for critical joints — contact Metav Werkzeuge for direct supply and expert specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833248NW UID: 4000833248NW Standard: DIN 6379 Label: Stiftschraube DIN6379 M8x100mm vergütet auf 10.9 AMF Manufacturer: AMF Core technical data Thread: M8 Overall length: 100 mm Width: 11 mm Packaging unit: 1 Materials & special features Hardened to property class 10.9 Conforms to DIN 6379 standard Product type: stud screw Axite enrichment: Addition: b: 63 FAQ What mechanical class does this stud screw have? The stud screw is hardened to property class 10.9, providing enhanced tensile strength suitable for many industrial joints. Is the fastener compliant with recognised standards? Yes, the component is produced to DIN 6379, ensuring standard geometry and mechanical tolerances for interchangeability. Which thread and length are specified? The fastener uses an M8 thread and an overall length of 100 mm, a common format for industrial assemblies. Can this stud be used as a direct replacement in existing DIN-based assemblies? Where assemblies expect DIN 6379 geometry and a 10.9 strength class, this AMF stud screw is designed for direct compatibility. How is the product supplied for inventory control? The item is supplied with a packaging unit of 1, simplifying spare-part stocking and single-part usage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Threaded Stud M16 Heat-Treated 8.8, DIN 6379 - AMF
Robust fastening reliability with DIN 6379 compliance and heat-treated strength class 8.8, combined with the compact M16 × 100 mm format for straightforward integration into assembly workflows. Order the DIN 6379 threaded stud M16 x 100 mm from AMF directly via Metav Werkzeuge or ask our consultants if needed. AMF DIN 6379 threaded stud M16 x 100 mm, tempered to 8.8 AMF DIN 6379 threaded stud M16 x 100 mm is a high-strength fastening element designed for mechanical assemblies and maintenance tasks where standardised threads and predictable clamping behaviour are required. Heat-treated to strength class 8.8 DIN 6379 compliant stud design Thread size M16 × 100 mm Wrench size 19 mm for secure tightening Consistent clamping force for reliable joints This threaded stud follows DIN 6379, ensuring dimensional conformity and interchangeability in industrial settings. The M16 x 100 mm specification gives a clear, verifiable basis for component selection, while the tempering to 8.8 provides enhanced tensile and yield characteristics compared with non-hardened fasteners. For workshops and production environments this translates into fewer retentions and predictable joint integrity under standard operating loads. Practical benefits during installation and maintenance Designed for efficient assembly, the stud’s standard M16 thread mates with commonly available hardware, and the wrench size 19 mm allows secure torque application using standard tools. The stud format reduces installation time in repeat-fit operations and supports straightforward replacement procedures in maintenance cycles. Minimal handling and clear specifications contribute to faster throughput on the shop floor and reduced downtime between changeovers. Traceability, packaging and supply advantages Delivered in packaging unit 1 and listed under SKU 4000833273NW, the part supports inventory control and traceability for repair or production orders. The AMF branded component benefits from production controls that align with industrial expectations for repeatability and quality. Sourcing via Metav Werkzeuge further provides access to centralised procurement, detailed product listings and a dependable logistics hub for European deliveries. For dependable mechanical fastening with AMF’s DIN 6379 stud (M16 x 100 mm, strength class 8.8), contact Metav Werkzeuge to secure supply or request technical clarification at info@metav-werkzeuge.com Technical data Article number: 4000833273NW Product type: threaded stud Standard: DIN 6379 Manufacturer: AMF Facts Thread: M16 Overall length: 100 mm Wrench size: 19 mm Packaging unit: 1 Special features Tempered to strength class 8.8 DIN 6379 compliant Brand: AMF Addition: b: 63 FAQ What standard does this stud meet? The stud adheres to DIN 6379, ensuring dimensional conformity and interchangeability for the AMF DIN 6379 threaded stud M16 x 100 mm (SKU 4000833273NW). What does strength class 8.8 indicate for use? Strength class 8.8 denotes a heat-treated, higher-strength fastener suitable for applications that require improved clamping force and reliable joint performance compared with untreated screws. Is the M16 thread compatible with standard nuts and components? Yes, the M16 thread is a standard metric size and is compatible with commonly available M16 nuts and mating parts when using the AMF threaded stud. How is the stud supplied for inventory and traceability? The item is supplied in packaging unit 1 and listed under SKU 4000833273NW, supporting straightforward stock management and order tracking. Which applications commonly use this type of stud? This stud format is typically used in mechanical engineering, maintenance and assembly operations where standardised fasteners and dependable clamping behaviour are required, such as machine assembly and fixture construction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Bolt DIN 6379 Heat Treated Grade 8.8, M16 Thread - AMF
Take advantage of a standardised fastener with proven tensile performance: the DIN 6379 specification combined with tempering to property class 8.8 delivers dependable strength for mechanical joints, while the M16 thread and 125 mm overall length ensure straightforward integration in existing assemblies – order directly via Metav Werkzeuge or consult their specialists for configuration and supply. Stud bolt DIN 6379 M16x125 mm, tempered to property class 8.8 (AMF) A Stud bolt DIN 6379 M16x125 mm engineered for high-strength fastening in mechanical and structural applications DIN 6379 standardised stud bolt Tempered to property class 8.8 for strength M16 thread with 125 mm overall length Hex width 19 mm for common spanners Dependable strength designed for repeated loading The stud adheres to DIN 6379, providing a verified basis for specification in production and maintenance documentation. Tempering to property class 8.8 means a defined yield and tensile strength suitable for many bolted connections where a balance of ductility and load capacity is required. This combination reduces the risk of premature failure under cyclical loads and supports predictable torque behaviour during assembly, delivering measurable improvements in joint reliability. Clear, measurable dimensions for quick assembly Precise sizing reduces assembly time and fitment errors: the component features an M16 threaded section and an overall length of 125 mm, with an across-flats width of 19 mm for commonly used wrenches. An indicated unthreaded section of b: 75 mm provides a controlled shank length for locating or shear applications, supporting consistent clamp lengths and enabling repeatable preload in bolted joints. These objective values simplify part selection and inventory management for workshops and maintenance teams. Versatile application and streamlined procurement Manufactured by AMF, the part is suitable for a wide range of mechanical assemblies where a robust threaded stud is required, from fixture construction to machine repairs. The combination of standard compliance and documented mechanical class helps integrate the component into quality-management systems and parts lists. For purchasing efficiency and supply reliability, Metav Werkzeuge offers centralised access to this and related fasteners, reducing supplier complexity while maintaining traceability and batch control. For tailored advice on AMF stud bolts (SKU 4000833274NW) and to ensure the right specification for critical joints, contact Metav Werkzeuge in Emmerich or request a technical consultation by phone or e-mail. Technical data Article number: 4000833274NW Designation: Stud bolt DIN 6379 M16x125 mm, tempered to property class 8.8 (AMF) Label: Stiftschraube DIN6379 M16x125mm vergütet auf 8.8 AMF Dimensions & thread Thread: M16 Overall length: 125 mm Width (across flats): 19 mm Unthreaded section b: 75 mm Packaging unit: 1 Special features Standard: DIN 6379 Property class: 8.8 (tempered) Brand: AMF SKU: 4000833274NW FAQ What mechanical class does this stud bolt meet? The stud bolt meets property class 8.8, indicating defined yield and tensile strength suitable for many structural and mechanical fastening tasks. Which standard governs the design of this fastener? The component is manufactured to DIN 6379, ensuring compatibility with engineering specifications that reference this German industrial standard. What are the key dimensions to check before ordering? Check the M16 thread, the 125 mm overall length and the across-flats width of 19 mm to ensure correct fitment for intended assemblies. Is there an unthreaded shank and how long is it? Yes, the product data indicates an unthreaded section b: 75 mm, which is useful for locating or shear-plane applications. Who is the supplier and how can this item be ordered? The SKU 4000833274NW identifies the AMF stud bolt; procurement and further consultation are available through Metav Werkzeuge for ordering and supply logistics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Bolt DIN 6379 Metric Fine Threaded Tempered Grade 8.8 - AMF
Take advantage of a high‑tensile, DIN‑compliant fastener: the M20 stud bolt, heat‑treated to property class 8.8 with an overall length of 125 mm ensures dependable clamping force and long service life; order directly via Metav Werkzeuge or consult the technical team for application advice. Stud bolt DIN 6379 M20×125, property class 8.8 — AMF The stud bolt DIN 6379 M20×125 is a heat‑treated, metric threaded fastener designed for secure mechanical joins in industrial and maintenance settings. Conforms to DIN 6379 standard Metric thread M20 for common assemblies Heat‑treated to property class 8.8 Overall length 125 mm for versatile use Consistent clamping performance for machinery assemblies The stud bolt is designed to deliver reliable clamping force where repeatable connections are required. Compliance with DIN 6379 establishes predictable geometries and tolerances, which supports consistent torque‑to‑preload behaviour in bolted joints. The M20 thread and property class 8.8 rating indicate a balance between tensile strength and ductility, reducing the risk of sudden brittle failure while enabling secure fixation under dynamic load. For procurement planners and maintenance engineers, these characteristics translate into predictable assembly behaviour and reduced rework. Simplified installation thanks to standard dimensions Standardised dimensions reduce complexity at the workbench and accelerate assembly cycles. The stud’s 125 mm overall length and thread specification match common nuts and clamping elements, enabling straightforward replacement in existing equipment without custom adaptations. A nominal width value of 27 mm supports compatibility with typical spanners and torque tools, so maintenance intervals can be completed faster and with conventional tooling. This dimensional clarity supports lean workshop processes and lowers downtime during repairs. Material treatment for durability under load The fastener is quenched and tempered to 8.8, providing strength suitable for many mechanical and structural applications while maintaining sufficient toughness. Heat treatment improves resistance to plastic deformation during tightening and service loads, which extends component life and maintains joint integrity. The construction ensures that the fastener sustains repeated assembly cycles and mechanical stresses common in industrial environments, offering a cost‑effective alternative to more exotic materials where extreme corrosion resistance or ultra‑high hardness are not required. Procurement and quality traceability for operations Specifying a fastener that adheres to established standards simplifies quality assurance. With the DIN reference and brand identification, batch traceability and conformity checks become straightforward steps in incoming inspection. The supplied packaging unit of 1 facilitates controlled stocking of critical spares, and the clear article identifier (SKU) supports efficient reordering and inventory management. Choosing a standardised stud from a recognised supplier minimises specification variance and supports uninterrupted production throughput. Contact Metav Werkzeuge for supply and specification support on AMF stud bolts conforming to DIN 6379 — available from our Emmerich warehouse; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 4000833283NW Brand: AMF Product type: Stud bolt Label: Stiftschraube DIN6379 M20x125mm vergütet auf 8.8 AMF Facts Standard: DIN 6379 Thread: M20 Overall length: 125 mm Width: 27 mm Packaging unit: 1 Special features Property class: 8.8 (quenched and tempered) SKU: 4000833283NW Intended use: industrial fastening and maintenance FAQ What standard does this stud bolt comply with? The stud bolt complies with DIN 6379, ensuring standardised dimensions and tolerances suitable for industrial assemblies. What is the tensile class of the fastener? The fastener is heat‑treated to property class 8.8, giving balanced tensile strength and toughness for general mechanical applications. Which thread and length are specified for this article? Thread is M20 and the overall length is 125 mm, matching common metric nuts and assembly requirements. Is the stud suitable for repeated disassembly and reassembly? Yes. The quenched and tempered 8.8 treatment improves resistance to deformation during tightening and reuse, so it is suitable for maintenance cycles. How is the product supplied for inventory purposes? The item is supplied in a packaging unit of 1, with SKU 4000833283NW for easy reordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Screw DIN 6379 Heat Treated 10.9 M10 - AMF
High-strength fastening for critical assemblies: tempered to grade 10.9 and manufactured to DIN 6379 for predictable mechanical behaviour in industrial use. Order this stud bolt directly via Metav Werkzeuge or consult our specialists for selection and availability. AMF stud bolt DIN 6379 M10 x 125 mm, Grade 10.9 The AMF stud bolt DIN 6379 M10 x 125 mm is a tempered threaded stud intended for high-strength mechanical and structural fastenings in workshops and production environments. Tempered to grade 10.9 Conforms to DIN 6379 standard Thread size M10 x 125 mm Width across flats 13 mm Reliable high-strength performance for safety-critical joints Manufactured to a recognised metric strength class, the stud provides repeatable mechanical properties under load. The grade 10.9 heat treatment denotes quenched and tempered steel with elevated yield and tensile strength, which reduces deformation and the risk of thread failure in dynamic or heavily stressed assemblies. For procurement and maintenance planning, the combination of a standardised specification and robust material treatment enables long-term predictability and lowers the frequency of unscheduled replacements while ensuring component safety in machinery and structural fixtures. Standardised dimensions for efficient assembly and inspection Compliance with DIN 6379 and the metric thread M10 x 125 mm ensures interchangeability with existing fasteners and compatibility with standard tooling. The 13 mm width across flats simplifies torque application with common spanners and sockets, supporting consistent assembly practice and accurate torque control. Standard dimensions support streamlined inventory management and permit straightforward verification during quality control; inspection routines can rely on familiar reference values rather than bespoke measurements, improving throughput in production and maintenance operations. Consistent workshop durability and traceable supply Tempering to grade 10.9 delivers consistent hardness and mechanical characteristics that are suitable for bolted joints exposed to high loads. The fastener’s specification reduces uncertainty during design and replacement work, while the clear labelling and traceability—including SKU 4000833254NW—support orderly stock management and documentation. Where project specifications mandate standard-compliant fasteners, this stud offers a cost-effective, reliable choice that aligns with industrial quality requirements and the expectations of professional workshops. For reliable high-strength fastenings select the AMF stud bolt and contact Metav Werkzeuge in Emmerich for availability and specialist advice: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000833254NW Description: Stud bolt, DIN 6379, tempered to 10.9 Manufacturer: AMF Packaging unit: 1 Dimensions & thread Thread: M10 Overall length: 125 mm Width across flats: 13 mm Materials & standards Strength class: 10.9 (quenched and tempered) Standard: DIN 6379 Identification: SKU 4000833254NW FAQ What does grade 10.9 mean for the stud’s performance? Grade 10.9 indicates a quenched and tempered steel fastener with elevated yield and tensile strength; the AMF stud bolt in grade 10.9 delivers higher load capacity and reduced risk of plastic deformation under heavy service loads. Is this fastener compatible with standard M10 nuts and tapped holes? Yes, the stud’s M10 x 125 mm thread matches standard metric M10 fastening elements and can be used with corresponding nuts and tapped holes specified for M10 threads. Can the stud be used in structural or machinery applications? The stud, produced to DIN 6379 and tempered to grade 10.9, is designed for mechanical and structural fastening where higher tensile strength and predictable behaviour are required. How is the stud identified in stock and documentation? The fastener is identified by SKU 4000833254NW and the designation Stud bolt, DIN 6379, M10 x 125 mm, tempered to 10.9, which assists in procurement and traceability. What tooling is recommended for installation? Assembly is facilitated by the 13 mm width across flats, permitting the use of standard sockets or spanners sized to that dimension for consistent torque application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Stud Screw M12x125 Hardened 10.9 DIN 6379 - AMF
Take advantage of DIN 6379 conformity and property class 10.9 strength for secure, long-term assemblies; the M12 thread and 125 mm overall length enable reliable integration in deep or multi-layer joints. Order directly via Metav Werkzeuge or request advice from our consultants for specification matching. AMF Stud Bolt DIN 6379 – M12 x 125 mm, Property Class 10.9 The AMF Stud Bolt DIN 6379 is a hardened threaded stud designed for high‑strength industrial fastening and assembly applications. High tensile strength grade 10.9 Thread size M12 for standard fittings Overall length 125 mm for deep assemblies Conforms to DIN 6379 standard Secure fastening with measurable strength The component is manufactured and tempered to property class 10.9, which delivers high tensile strength and predictable elastic behaviour under load. Compliance with DIN 6379 ensures that the geometry and thread form meet established industrial tolerances, simplifying integration with standard nuts and mating components. This technical consistency reduces assembly rework and supports reliable load-bearing joints in machine construction and structural fastening. Compatibility that speeds up assembly A standard M12 thread combined with an overall length of 125 mm offers straightforward interchangeability with common fasteners and fixtures. The stud’s dimensions favour installations where depth and clamping length matter, enabling designers and fitters to calculate clamping forces and thread engagement with confidence. Clear, standardised specifications mean fewer bespoke parts, faster procurement cycles and reduced planning overhead on the shop floor. Traceability and practical supply for production Marked identification and the supplied article reference make stock control and reordering efficient; the item is supplied per packaging unit 1, suitable for precision replacement or single‑part assembly work. The robust mechanical properties and standardised form reduce the risk of premature failure, supporting uptime and predictable maintenance intervals. For workshops and production lines that rely on repeatable quality, this stud is a practical component to keep on the shelf. Contact Metav Werkzeuge for tailored procurement advice, specification confirmation and to secure the correct stud bolt for the application; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 4000833261NW Standard: DIN 6379 Thread: M12 Overall length: 125 mm Width: 15 mm Facts Property class: 10.9 Packaging unit: 1 SKU: 4000833261NW Special features Tempered to property class 10.9 Conformity with DIN 6379 Addition: b: 75 Manufacturer: AMF FAQ What material strength does the stud provide? The stud is specified as tempered to property class 10.9, providing high tensile strength and reliable performance in load-bearing applications. Is the thread compatible with standard nuts and fittings? Yes, the M12 thread matches standard metric M12 nuts and components, allowing straightforward integration into common assemblies. What standard certifies the stud’s dimensions and tolerances? The stud conforms to DIN 6379, which governs the dimensions and thread form relevant to this type of threaded stud. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt DIN 6379 Hardened Grade 8.8, M20 Thread - AMF
Take advantage of the combination of DIN 6379 standard conformity, M20 thread size and Class 8.8 heat treatment for durable, reliable fastening. The stud bolt’s robust 160 mm overall length and 27 mm spanner width ensure secure assembly and straightforward installation—order direct via Metav Werkzeuge or consult our specialists for application advice. Stiftschraube DIN6379 M20x160mm, tempered to 8.8 — AMF stud bolt A stud bolt DIN 6379 M20x160mm engineered for high-strength joining in mechanical and structural assemblies, particularly where standardised dimensions and reproducible performance are required High tensile class 8.8 Standard DIN 6379 compliance Thread size M20 for common fittings Spanner width 27 mm for secure tightening Reliable strength and repeatable performance for industrial assemblies The combination of DIN 6379 geometry and a Class 8.8 heat treatment delivers a predictable yield and tensile behaviour that supports safe connections under cyclical and static loads. Specified as a stud bolt with a metric M20 thread and 160 mm overall length, this component provides a consistent fit in standard nuts and tapped holes. The material is tempered to achieve the stated strength grade, which reduces the risk of elongation or failure in service and simplifies engineering calculations for joint design. For production environments that prioritise uptime, the standard compliance reduces inspection overhead and supports interchangeability across suppliers. Practical benefits during installation and inspection A defined spanner width of 27 mm and an overall design to DIN 6379 make handling, torqueing and visual inspection straightforward. The uniform thread profile ensures predictable torque–tension relationships, easing the selection of tightening procedures and torque settings in assembly instructions. The fastener’s geometry supports use with standard fastening tools and common nuts, enabling efficient assembly lines and clean maintenance protocols. Traceability is simplified when components adhere to established standards, which helps quality control teams document batches and perform acceptance checks with confidence. Application suitability and lifecycle considerations Designed for applications requiring medium-high strength, the stud is suitable for machinery frames, fixture assemblies and structural joints where M20 metric fasteners are standard. The Class 8.8 rating indicates good resistance to standard mechanical stresses encountered in industrial and workshop settings while remaining compatible with commonly used steels and fittings. For environments with special corrosion or temperature demands, material and coating requirements should be verified separately; this fastener’s documented standard and grade provide a clear baseline for such assessments and for specifying any additional surface treatments or specialised grades if needed. For AMF high-strength fastening solutions, choose this DIN 6379 stud bolt and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833284NW Description: Stiftschraube DIN6379 M20x160mm, tempered to 8.8 AMF Manufacturer: AMF Facts Thread: M20 Overall length: 160 mm Spanner width: 27 mm Packaging unit: 1 Special features Standard: DIN 6379 Tensile class: 8.8 (tempered) Additional info: Addition: b: 100 Product type: Stud bolt FAQ Is this stud bolt suitable for structural bolting applications? The stud bolt specified to DIN 6379 and tempered to Class 8.8 is suitable for many structural and mechanical joining tasks where medium-high strength is required; check the joint design and loading conditions to confirm suitability. What are the key dimensions to check before ordering? Verify the M20 thread size, the overall length of 160 mm, and the spanner width of 27 mm to ensure compatibility with mating nuts and clearance in the assembly. Can the fastener be used with standard metric nuts? Yes — the M20 metric thread is compatible with standard M20 nuts specified for the corresponding strength class, provided the nut grade and fit match the application requirements. How is the strength grade indicated and what does Class 8.8 mean? Class 8.8 denotes a quenched and tempered steel with a defined yield and tensile strength range; the designation indicates medium-high tensile performance suitable for many industrial applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt Heat-Treated 8.8 DIN 6379, M16 Thread - AMF
Combine DIN 6379 standard conformity with an M16 × 160 mm form factor and property class 8.8 tempering for dependable, repeatable fastening. Order the stud bolt directly via Metav Werkzeuge or consult the team for application-specific advice. AMF stud bolt DIN 6379 – M16 × 160 mm, property class 8.8 A AMF stud bolt engineered to meet DIN 6379 requirements, providing a metric M16 thread and 160 mm overall length for robust mechanical and workshop fastening tasks. DIN 6379 compliant geometry M16 metric thread for robust connections Property class 8.8 for high tensile strength Consistent geometry for secure assemblies Compliance with DIN 6379 guarantees a standardised thread and shank geometry that supports predictable clamping behaviour and interchangeability across production batches. The standardised form reduces assembly errors and simplifies inventory management, since replacement parts match original specifications. This regularity benefits quality-controlled environments where traceability and repeatability are decisive for production reliability. High tensile performance explained Tempering to property class 8.8 indicates a high-strength finishing process that increases tensile and yield values compared with lower classes. A fastener treated to this class offers improved resistance against shear and loosening under dynamic loads, making it suitable where elevated mechanical stress occurs. The term property class 8.8 summarises strength data in a way that is widely recognised in engineering specifications and procurement documents. Practical compatibility and handling in workshops The metric M16 thread combined with an overall length of 160 mm provides a versatile solution for through-bolted joints and applications requiring extended engagement. The specified 19 mm width across flats facilitates standard spanner use and speeds up assembly operations on workbenches and production lines. Supplied in single-unit packaging, the component suits both one-off repairs and controlled-fit assemblies without overstocking. Standards and supplier assurance to lower procurement risk Using standard-compliant fasteners reduces rejection rates during inspection and supports compliance with documented assembly procedures. The combination of norm conformity, clear dimensional data and defined strength class aids engineers in making rational selection decisions. For further technical clarification or compatibility checks, the Metav contact channels are available: info@metav-werkzeuge.com and +49 2822 7131930. Contact Metav Werkzeuge today to confirm suitability of the AMF stud bolt tempered to property class 8.8 for specific assembly requirements and to request procurement support. Technical data Article number: 4000833275NW Standard: DIN 6379 Brand: AMF Facts Thread: M16 Overall length: 160 mm Width across flats: 19 mm Packaging unit: 1 Special features Property class: 8.8 (tempered) Conforms to DIN 6379 Product type: stud bolt Addition: b: 100 FAQ What does DIN 6379 mean for the stud bolt? DIN 6379 defines the geometry and tolerances that the stud bolt must meet, ensuring consistent fit and interchangeability with mating components. Is this fastener suitable for high-load connections? The AMF stud bolt, tempered to property class 8.8, is designed for elevated tensile demands and is appropriate where higher strength fasteners are required. Which tools are compatible with the 19 mm width? Standard 19 mm spanners and sockets match the width across flats specified for this stud bolt, enabling efficient tightening and removal in workshop environments. How to verify the correct part for procurement? Check the Article number 4000833275NW, the DIN 6379 standard, thread size M16 and overall length 160 mm against engineering drawings or BOM lists to confirm correctness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M12 Hardened 10.9, DIN 6379 - AMF
Robust fastening for demanding assemblies: the stud bolt combines DIN 6379 compliance with an M12 thread and 160 mm overall length, tempered to property class 10.9 for high tensile strength; order directly via Metav Werkzeuge or consult our specialists for specification advice. AMF Stud Bolt DIN 6379 M12 x 160 mm, Class 10.9 The AMF stud bolt DIN 6379 M12 x 160 mm is a high-strength threaded fastener designed for secure mechanical connections in industrial and workshop assemblies. Stud bolt with DIN 6379 specification High-strength Class 10.9 heat-treated steel M12 thread for standard metric assemblies 160 mm overall length for deep fixings Secure connections for heavy-duty assemblies Manufactured to the DIN 6379 standard and tempered to Class 10.9, this stud bolt provides a reliable solution where tensile strength and fatigue resistance are essential. The heat treatment increases yield strength and reduces the risk of fastener failure in dynamic or high-load environments. Specifying a component with recognised standard compliance reduces procurement risk and simplifies quality control, as the characteristic mechanical properties are verifiable against established norms. Compatibility and installation benefits With an M12 metric thread and a 160 mm overall length, the stud is suited to common industrial applications such as flanged joints, long-through fixings and assembled components requiring a double-ended threaded solution. The metric thread ensures compatibility with standard nuts and tapped holes, while the extended length allows secure engagement through thicker assemblies. Using a threaded stud instead of a single-piece bolt can ease alignment and maintenance in repeated assembly processes. Practical advantages for workshop and production use The combination of standard specification and high property class delivers practical benefits: reduced downtime through fewer fastener failures, and predictable performance under load. The robust geometry supports stable clamping forces, and the heat treatment minimises elongation under heavy preload. Where traceability is required, this product’s conformity to a recognised DIN standard aids documentation and audit processes within manufacturing or maintenance workflows. Ordering, supply and specification support Packaging is supplied per unit and traceable via the SKU 4000833262NW. Clear labelling and a straightforward product specification simplify stock management for procurement teams. If additional technical clarification is required for material compatibility or assembly recommendations, technical consultants are available to assist with selection and integration into existing processes. Contact Metav Werkzeuge for project-specific advice and reliable supply of AMF stud bolts from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 4000833262NW Standard: DIN 6379 Thread: M12 Overall length: 160 mm Label: Stiftschraube DIN6379 M12x160mm vergütet auf 10.9 AMF Packaging unit: 1 Facts Width: 15 mm Thread size: M12 Length: 160 mm Property class: 10.9 Special features Tempered to property class 10.9 Product type: Stud bolt Brand: AMF axite enrichment: Addition: b: 100 FAQ What standard does this stud bolt comply with? The stud bolt conforms to DIN 6379, ensuring standardised mechanical properties and traceable specification for industrial use. What is the material strength of the AMF stud bolt? The AMF stud bolt is heat-treated to property class 10.9, providing elevated tensile strength and improved fatigue resistance for demanding applications. Which thread and length are provided with this fastener? This threaded stud features an M12 metric thread and an overall length of 160 mm, suitable for standard M12 assemblies and deeper fixings. How is the product delivered and identified? The item is supplied per unit and identifiable via SKU 4000833262NW; the product label matches the DIN 6379 specification and Class 10.9 designation. Is this stud bolt suitable for repetitive assembly and maintenance tasks? Yes; the stud’s standard specification and high property class make it suitable for repetitive assemblies where secure clamping and predictable performance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M14x160 Tempered 8.8, DIN 6379 - AMF
Benefit from a robust DIN 6379 design and property class 8.8 strength combined with standard M14 compatibility for dependable mechanical joints; precise dimensions and traceable stock-keeping make procurement straightforward. Order the AMF stud bolt directly via Metav Werkzeuge or ask our consultants if needed. AMF Stud Bolt DIN 6379 – M14 x 160 mm, quenched to property class 8.8 A durable AMF stud bolt DIN 6379 designed for standard industrial fastening tasks where reliable clamping force and metric compatibility are required. DIN 6379 compliant stud bolt Quenched and tempered to property class 8.8 M14 thread for metric compatibility 160 mm overall length, 17 mm wrench size Secure clamping with industrial-grade strength The stud bolt is manufactured to DIN 6379 and quenched and tempered to property class 8.8, providing a high-strength fastening solution for assemblies that demand consistent preload and fatigue resistance. This heat-treatment designation indicates elevated mechanical performance compared with lower property classes, which translates into reduced risk of joint loosening under dynamic loads. The adherence to an established DIN standard ensures interchangeability with other DIN-compliant fasteners and supports predictable behaviour in bolted connections. Straightforward integration with metric systems Equipped with an M14 thread and an overall length of 160 mm, the component fits common metric tapping and nut configurations, simplifying parts selection for maintenance and new builds. The listed width of 17 mm indicates the appropriate spanner or socket dimension for installation, enabling fast torque application with standard tooling. Clear dimensional data allows planning for correct thread engagement and clamp length, helping to avoid under- or over-torquing and ensuring a secure, long-lasting joint. Traceability, stock clarity and workshop confidence The article is supplied as a single item per packaging unit and carries an identifiable SKU for inventory control, supporting traceability in production and maintenance workflows. Procurement via Metav Werkzeuge benefits from their quality filter in Emmerich, which combines broad product range and dependable order handling for industrial customers. For technical clarifications or compatibility checks, the Metav team can provide targeted advice so that the chosen stud bolt meets operational needs and assembly standards. Contact Metav Werkzeuge for tailored advice and procurement from Emmerich — their consultants will confirm compatibility and ensure reliable supply of AMF stud bolts. Technical data Article number: 4000833268NW SKU/UID: 4000833268NW Brand: AMF Article designation: Stud bolt DIN 6379 M14 x 160 mm, quenched to property class 8.8 Facts Thread: M14 Overall length: 160 mm Width (wrench size): 17 mm Packaging unit: 1 Enrichment note: Addition: b: 100 Special features DIN 6379 standard conformity Heat-treated to property class 8.8 Metric thread for standard assemblies Single-item packaging for direct use FAQ Is this stud bolt suitable for standard metric nuts and tapped holes? The stud bolt features an M14 thread and is intended for use with standard M14 nuts and tapped holes complying with metric standards; compatibility should be verified against the mating part thread class. What does property class 8.8 mean for performance? Property class 8.8 denotes a quenched and tempered fastener with elevated tensile and yield strength characteristics; the AMF stud bolt manufactured to this class provides improved resistance to static and dynamic loads compared with lower classes. Which wrench size is recommended for installation? A 17 mm wrench or socket corresponds to the width indicated for the item and is recommended to achieve correct torque application during assembly. How is the item identified for inventory and ordering? The product is listed under article number 4000833268NW and supplied as a single unit per packaging; use this SKU when ordering or checking stock levels. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M24x160 Hardened 8.8 DIN 6379 - AMF
Take advantage of a combination of standard conformity, robust strength and metric precision for dependable heavy‑duty fastening; order the part directly via Metav Werkzeuge or enquire with their specialists for application guidance. AMF Stud bolt DIN 6379 M24 × 160 mm, heat‑treated to class 8.8 The AMF Stud bolt DIN 6379 M24 × 160 mm is a metric stud engineered for secure fastening in heavy‑duty assemblies and industrial fixtures. Stud bolt to DIN 6379 standard Metric thread M24 for interchangeability 160 mm overall length for deep engagement Heat‑treated to class 8.8 for enhanced strength Built for robust, repeatable fastening performance The fastener meets DIN 6379, granting a clear benchmark for compatibility and interchangeability across industrial components. With a M24 metric thread and 160 mm overall length, the stud is suited to applications requiring deep thread engagement and a secure clamping path. The heat treatment to class 8.8 increases yield and tensile limits, which translates into predictable load capacity and fewer rework cycles. Such specification‑led construction reduces downtime and supports efficient assembly processes on production lines. Precision thread form and assembly reliability A consistent metric thread profile ensures proper fit with standard nuts and tapped holes, simplifying procurement and reducing inventory complexity. The controlled dimensions and tolerance adherence implied by the DIN standard improve torque behaviour and minimise the risk of cross‑threading during installation. Where thread engagement length is critical, the defined 160 mm overall length facilitates correct clamp thickness calculations and predictable preload, supporting structural integrity in welded frames, gearboxes, and heavy machinery junctions. Durability, maintenance benefits and supply assurance The component’s heat‑treated condition delivers enhanced tensile strength and fatigue resistance, extending service intervals and lowering lifecycle maintenance. In environments where mechanical reliability is essential, such mechanical conditioning helps prevent loosening and fatigue failures under cyclic loading. Combined with consistent manufacturing standards, this fastener contributes to long service life and fewer unscheduled interventions, supporting cost‑efficient operation in workshops and production facilities alike. For specification support or to procure this AMF stud bolt via Metav Werkzeuge, contact Metav’s technical team for tailored advice and reliable supply from Emmerich. Technical data SKU: 4000833296NW Label: Stud bolt DIN 6379 M24x160mm heat‑treated to 8.8 AMF Standard: DIN 6379 Product type: Stud bolt Packaging unit: 1 Core specifications Thread: M24 Overall length: 160 mm Width: 35 mm Addition: b: 100 Special features Heat‑treated to class 8.8 Conforms to DIN 6379 Brand: AMF Packaging unit: 1 FAQ What standard does this stud bolt comply with? This stud bolt complies with DIN 6379, which defines dimensions and requirements for metric studs used in industrial assemblies. What are the key dimensions of the fastener? The fastener features an M24 metric thread and an overall length of 160 mm; the SKU is 4000833296NW for reference. Is the stud suitable for heavy‑duty applications? Yes, the AMF stud bolt is heat‑treated to class 8.8, providing enhanced tensile strength and suitability for heavy‑duty fastening. How does the heat treatment affect performance? Heat treatment to class 8.8 increases yield and tensile properties, improving fatigue resistance and reducing the likelihood of mechanical failure in cyclic loads. Can this stud be used with standard M24 nuts? The M24 thread conforms to metric standards, allowing interchangeability with conventional M24 nuts and tapped holes that match DIN thread specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Stud Bolt M8 Heat-Treated 8.8, DIN 6379 - AMF
Take advantage of the combination of standard-compliant dimensions, grade 8.8 tempering and simple selection for reliable mechanical fastening — order the parts directly via Metav Werkzeuge or consult our specialists for precise specification advice. AMF stud bolt — DIN 6379, M8 x 160 mm, tempered to grade 8.8 AMF stud bolt M8 x 160 mm for secure mechanical joins and industrial assemblies, engineered to DIN 6379 dimensional standards DIN 6379 compliance Tempered to grade 8.8 Thread M8 × 160 mm Predictable strength where it matters The fastener conforms to DIN 6379, ensuring consistent dimensions and fit across metric assemblies. Tempering to grade 8.8 provides a defined tensile and yield performance profile, which translates into predictable clamping behaviour under load. This reliability reduces rework and inspection effort in production environments and supports consistent torqueing and joint integrity on the shop floor. Straightforward compatibility with metric systems A clear metric designation of M8 × 160 mm streamlines selection and stocking for maintenance and assembly operations. The M8 thread size matches standard metric nuts and threaded holes, simplifying procurement and reducing the need for bespoke components. The overall length of 160 mm offers reach for through‑bolt or stud applications, improving assembly efficiency in machines and structural fixings. Durable finish and workshop-ready supply The tempering process increases fatigue resistance and strength without requiring special mounting procedures; the result is a robust fastener suitable for repeated assembly cycles. Supplied as individual units, the component is ready for immediate use or integration into larger kits. For buyers seeking consistency across multiple workstations, this familiar industrial specification supports streamlined quality control and straightforward inventory management. Request a specification check or delivery option from Metav Werkzeuge — our Emmerich team can confirm suitability for the intended application and arrange prompt supply via phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833250NW Label: Stiftschraube DIN6379 M8x160mm vergütet auf 8.8 AMF Brand: AMF Data Thread: M8 Overall length: 160 mm Width: 11 mm Packaging unit: 1 Special features Standard: DIN 6379 Tempered to grade 8.8 Axite enrichment: Addition: b: 100 Product type: Stud bolt FAQ What does DIN 6379 indicate for this fastener? DIN 6379 specifies the dimensional and tolerance requirements for this style of stud, so the part labelled to DIN 6379 fits predictably in standard metric assemblies. What is the significance of grade 8.8 tempering? Grade 8.8 denotes a quenched and tempered steel fastener with a defined tensile and yield strength range, providing improved load capacity and fatigue performance compared with lower strength classes. Is the M8 thread compatible with common nuts and tapped holes? Yes. The M8 designation matches standard metric M8 nuts and tapped holes, allowing straightforward replacement and compatibility in metric systems. Does the 160 mm measure refer to overall length or thread length? The 160 mm figure denotes the overall length of the stud; please confirm required thread engagement for specific assemblies prior to fitting. How is the item supplied and in what unit? The product is supplied in a packaging unit of 1, as indicated on the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dowel Screw M12x200 Hardened Grade 10.9 DIN 6379 - AMF
Take advantage of a high-strength fastening solution that combines DIN 6379 conformity, an M12 threaded connection and a heat-treated property class 10.9 for reliable performance in industrial assemblies; order the stud bolt directly via Metav Werkzeuge or consult our specialists for specification support. AMF stud bolt DIN 6379 M12 x 200 mm, heat-treated to 10.9 A AMF stud bolt DIN 6379 M12 x 200 mm engineered for secure, high-load fastening in machine construction, fixtures and maintenance applications. *Stud bolt to DIN 6379 specification *Heat-treated to property class 10.9 *M12 threaded connection, robust fit *Overall length 200 mm, thread length 122 mm Consistent high tensile performance for demanding assemblies The stud provides high tensile strength through targeted heat treatment to property class 10.9, which significantly increases load-bearing capacity compared with lower classes. This results in reduced risk of fastener failure under cyclical or shear loads and contributes to longer service intervals. The combination of standard conformity and enhanced strength supports safe assembly designs and helps maintain production continuity where component integrity is critical. Defined dimensions and standard conformity that simplify planning Conformity to DIN 6379 ensures interchangeability and predictable fitment in standardised components. With an M12 thread and an overall length of 200 mm, the fastener suits applications requiring extended engagement length. The specified thread length b: 122 mm gives clarity for design calculations and enables correct selection of mating nuts and washers. These measurable values simplify ordering, inventory management and engineering documentation. Practical advantages in procurement and workshop workflows Supplied in single-unit packaging and identified by SKU 4000833263NW, the fastener supports targeted stocking for repair and assembly tasks. The clear specification reduces query time during procurement and the robust mechanical properties minimise rework due to inadequate hardware. Where reliability and traceability are priorities, the fastener represents a practical option for production workshops and maintenance teams that value predictable performance and easy replacement. For secure, high-strength fastening solutions and procurement assistance for AMF stud bolts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: 4000833263NW Brand: AMF Product type: Stud bolt Standard: DIN 6379 Facts Thread: M12 Overall length: 200 mm Width across flats: 15 mm Thread length (b): 122 mm Special features Heat-treated to property class 10.9 Single unit packaging Industrial fastening for machine construction and fixtures FAQ What strength class does this stud bolt have? The stud bolt is heat-treated to property class 10.9, providing high tensile capacity suitable for demanding fastening tasks. Is the fastener compliant with recognised standards? Yes, the fastener conforms to DIN 6379, ensuring standardised dimensions and interchangeability in industrial assemblies. What are the critical dimensions for design integration? Key dimensions are M12 thread, overall length 200 mm and a thread length b: 122 mm, which should be used when specifying mating components. Can this stud bolt be used with common M12 nuts and washers? Compatibility with standard M12 nuts and washers is expected when matched to the stud’s thread specification and property class. How is the product identified for ordering or stock? The item is listed under SKU 4000833263NW, facilitating clear ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt DIN 6379 M16 Heat Treated 8.8 - AMF
Robust fastenings meet consistent quality: the stud bolt combines DIN 6379 compliance with heat treatment to property class 8.8, and a standard M16 thread at 200 mm overall length to deliver reliable tensile performance and repeatable assembly results. Order the item directly via Metav Werkzeuge or consult Metav's advisers for supply and batch planning. AMF stud bolt DIN 6379 — M16 x 200 mm, quenched and tempered to 8.8 A AMF stud bolt DIN 6379 M16 x 200 mm, designed for secure mechanical assemblies where standardised dimensions and elevated strength are required. DIN 6379 standardised design Heat-treated to property class 8.8 M16 thread for standard assemblies 200 mm overall length Consistent mechanical performance for standard assemblies The stud bolt is made to the DIN 6379 specification and offers a predictable geometry for flange and coupling connections. The combination of a standard M16 thread and 200 mm overall length enables straightforward integration into established fastening concepts, reducing set-up time and ensuring interchangeability. The component's repeatable dimensions support process stability in production and maintenance tasks, providing measurable benefits for mechanical consistency and assembly efficiency. Heat treatment and what property class 8.8 delivers Heat treatment described as quenched and tempered results in the declared property class 8.8, which balances tensile strength with ductility for dependable load-bearing behaviour. This treatment increases resistance to static and dynamic stresses compared with untreated fasteners while maintaining machinability for final adjustments. The result is a robust fastener suitable for applications demanding elevated mechanical reliability without resorting to specialised high-alloy solutions. Practical handling and installation advantages in the workshop With a nominal width 19 mm and a standard metric thread, the stud allows use with common wrenches, nuts and washers, simplifying tooling and inventory requirements. The product's standardisation reduces the need for special components and supports efficient replenishment cycles from central stock. Where traceability is required, the item can be referenced by its article number for quality records and procurement planning, contributing to streamlined workshop logistics and reduced downtime. Discuss batch supply and technical options for the AMF stud bolt with Metav Werkzeuge’s specialists in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833276NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Label: Stiftschraube DIN6379 M16x200mm vergütet auf 8.8 AMF Core measurements Thread: M16 Overall length: 200 mm Width: 19 mm Packaging unit: 1 Special features Heat treatment: quenched and tempered to property class 8.8 Standard compliance: DIN 6379 Axite enrichment: Addition: b: 122 FAQ What standard does this stud bolt conform to? The item conforms to DIN 6379, ensuring standardised dimensions and fit for typical mechanical and structural connections. Which thread and length are specified for the fastener? The fastener is supplied as an M16 thread with a 200 mm overall length, matching conventional metric assembly requirements. What does property class 8.8 indicate for this fastener? Property class 8.8 denotes that the stud bolt has undergone heat treatment (quenched and tempered) to provide enhanced tensile performance and reliable load-bearing characteristics. Is the stud suitable for standard workshop tooling? Yes; the nominal width 19 mm and metric thread make the component compatible with commonly available wrenches, nuts and washers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt M20x200 Quenched Grade 8.8, DIN 6379 - AMF
Take advantage of a high‑strength stud bolt that meets DIN 6379, with an M20 thread and an overall length of 200 mm, for dependable mechanical fastening; order the part directly via Metav Werkzeuge or consult the technical team for application advice. AMF Stiftschraube DIN 6379 – Stud bolt M20 x 200 mm, property class 8.8 The AMF Stiftschraube DIN6379 M20x200mm is a heat‑treated stud bolt designed for secure fastening in industrial and workshop assemblies. DIN 6379 conforming stud bolt Heat-treated to property class 8.8 Thread M20 for standard fittings Overall length 200 mm Reliable fastening for demanding assemblies A stud bolt manufactured to an established metric standard delivers consistent clamping and repeatable performance. The compliance with DIN 6379 ensures dimensional accuracy and interchangeability with standard nuts and threaded components, reducing assembly time and the risk of mismatched parts. Specifying a stud with defined mechanical properties supports predictable joint behaviour under load, which in turn helps to minimise unscheduled downtime and keeps production flows steady. Clear specification for confident selection Key specification data such as M20 thread and 200 mm overall length make selection straightforward when matching to flanges, housings or repair parts in mechanical systems. The marking of property class 8.8 indicates that the fastener has been heat‑treated to provide elevated strength compared with standard grade fasteners; this attribute is important when higher clamping forces or fatigue resistance are required. Where necessary, refer to the relevant engineering tables or DIN documentation for pitch and torque guidance to ensure secure installation. Practical fit and installation guidance for workshop use For routine workshop and industrial use, this stud bolt works well in assemblies that demand a robust metric connection and consistent geometry. When installing, ensure correct thread engagement and use appropriate locking measures to maintain joint integrity over time. The product’s standardised dimensions facilitate inventory management and simplify maintenance planning, enabling rapid replacement during service operations and supporting efficient workshop workflows. For specification confirmation or application support for the AMF stud bolt, contact Metav Werkzeuge’s technical advisors in Emmerich at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 4000833285NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Facts Thread: M20 Overall length: 200 mm Width: 27 mm Special features Heat-treated to property class 8.8 Packaging unit: 1 Label: Stiftschraube DIN6379 M20x200mm vergütet auf 8.8 AMF Axite enrichment: Addition: b: 122 FAQ What standard does this stud bolt conform to? The stud bolt is manufactured to DIN 6379, as stated on the product label for reliable dimensional and thread conformity. What do the markings ‘M20’ and ‘200 mm’ mean for selection? They denote a metric M20 thread and an overall length of 200 mm, which define compatibility with standard nuts and mounting depths for mechanical assemblies. What does property class 8.8 indicate about strength? Property class 8.8 describes the heat‑treated condition and mechanical strength level of the fastener, signifying higher tensile and yield performance compared with lower classes. How is the item identified for ordering? Order using the SKU 4000833285NW and refer to the product label description to ensure the correct AMF stud bolt is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Stud Bolt M24x200 Heat-Treated Grade 8.8, DIN 6379 - AMF
Take advantage of a standardised fastener that combines DIN 6379 conformity, a robust M24 thread and quenched and tempered 8.8 material properties for secure, repeatable assembly performance. Order the AMF stud bolt directly via Metav Werkzeuge or ask our consultants if additional data is required. AMF stud bolt DIN 6379, M24 x 200 mm, property class 8.8 A AMF stud bolt DIN 6379 M24 x 200 mm designed for reliable mechanical fastening in industrial assembly, maintenance and plant construction applications. DIN 6379 compliant Thread dimension M24 Overall length 200 mm Tempered to property class 8.8 Consistent clamping and industrial interchangeability The stud bolt is manufactured to DIN 6379, ensuring consistent dimensional accuracy and interchangeability in production and repair environments. Compliance with this standard simplifies procurement and assembly planning by aligning with widely accepted metric fastening specifications. The component’s quenched and tempered 8.8 designation indicates a medium-high strength class, delivering dependable clamp load for structural joints while maintaining good toughness for general industrial use. Precise thread and length for deep-installation tasks Equipped with a coarse M24 thread and an overall length of 200 mm, the fastener suits deeper thread engagements and multi-layer joints. The supplied data also indicates a thread length b: 122 mm, which supports extended engagement where longer threaded overlap is required. Accurate thread form and size mean predictable torque-to-tension behaviour and easier selection of appropriate nuts and washers, reducing rework and improving assembly efficiency. Application scope, handling and quality assurance This stud bolt is aimed at plant builders, maintenance technicians and mechanical assemblers who require a standardised, heat-treated fastener for robust connections. Supplied as a single unit, the part is ready for immediate installation and is appropriate for structural and equipment fastening where an 8.8 property class is specified. For any uncertainty about fitment or compatibility with a specific machine or construction detail, Metav Werkzeuge’s technical advisers can provide comparative data and guidance to ensure the correct choice for each application. For supply and technical advice on AMF stud bolts, contact Metav Werkzeuge in Emmerich — request application guidance or delivery information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833297NW SKU: 4000833297NW Product type: Stud bolt (Stiftschraube) Standard: DIN 6379 Label: Stiftschraube DIN6379 M24x200mm vergütet auf 8.8 AMF Facts Thread: M24 Overall length: 200 mm Width: 35 mm Thread length b: 122 mm Packaging unit: 1 Special features Quenched and tempered to property class 8.8 Metric coarse thread for mechanical assemblies Suitable for standard industrial fastening tasks FAQ What standard does this stud bolt comply with? The stud bolt is manufactured to DIN 6379, which defines the dimensional and thread characteristics for this type of metric stud. What are the key dimensions of the fastener? Key dimensions include M24 thread, 200 mm overall length and a thread length b: 122 mm, as specified for this item. What does property class 8.8 mean for application? Property class 8.8 indicates a quenched and tempered fastener with medium-high tensile strength, suitable for many structural and machinery connections where a reliable clamp force is required. Is the stud bolt supplied individually or in bulk? This item is supplied in a packaging unit of 1, ready for immediate installation. Can this fastener be used in structural steel assemblies? Yes, the combination of DIN 6379 conformity and 8.8 heat treatment makes the fastener appropriate for standard structural and equipment fastening, subject to project-specific specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Stud Bolt M16 Heat Treated 8.8 DIN 6379 - AMF
The combination of DIN 6379 conformity, an M16 thread and a 250 mm overall length ensures reliable mechanical fastening and straightforward parts interchangeability; tempered to strength class 8.8, the fastener delivers consistent clamping performance for industrial assemblies. Order the stud bolt directly via Metav Werkzeuge or ask our consultants if needed. Stud bolt DIN 6379 M16 x 250 mm, tempered to 8.8 — AMF A Stud bolt DIN 6379 M16 x 250 mm tempered to 8.8 (AMF) for secure, standardised mechanical joins in workshop and industrial applications Conforms to DIN 6379 standard M16 thread for robust connections Tempered to strength class 8.8 Hex drive width 19 mm for controlled torque Consistent performance for structural fastenings Conformity with DIN 6379 guarantees that this stud bolt fits established machine and assembly standards, which simplifies spare-part management and reduces downtime. The M16 thread paired with the 250 mm overall length provides a long engagement depth that is suitable for bolting through thick assemblies, while the tempered treatment to class 8.8 increases tensile strength and yield characteristics. This combination is designed for repeatable clamping force, which helps maintain joint integrity under cyclic loads and routine maintenance. Precision features that aid efficient installation The external thread form and the hex 19 mm drive interface enable reliable torque transmission during tightening, so the joint can be tensioned predictably. These characteristics, when used with calibrated torque tools, reduce the risk of over- or under-tightening and contribute to consistent assembly quality. The item’s adherence to an established norm allows planners to specify the fastener in CAD and parts lists with confidence, facilitating procurement and ensuring compatibility across production batches. Clear specification and supply details for purchasing Technical transparency is provided through the clear labelling of standard, thread size and strength class, which streamlines material approvals and quality checks. The product is supplied as a single unit, labelled for traceability and inventory control. The SKU 4000833277NW and the visible marking of 8.8 tempering support documentation for quality records, and purchasing teams benefit from immediate identification when ordering replacements or matching components. For application advice or to secure stock of AMF stud bolts, contact Metav Werkzeuge’s technical team and order through their procurement channel for prompt, reliable supply Technical data Article number: 4000833277NW Product: Stud bolt Brand: AMF Standard: DIN 6379 Facts Thread: M16 Overall length: 250 mm Hex width: 19 mm Strength class: 8.8 Packaging unit: 1 Special features Tempered to strength class 8.8 Conforms to DIN 6379 Single-piece supply Marked SKU for traceability FAQ What does strength class 8.8 mean for load capacity? Strength class 8.8 indicates a quenched and tempered bolt with enhanced tensile and yield properties compared with lower classes; the AMF stud bolt graded 8.8 is intended for demanding mechanical joints where reliable clamping is required. Is this stud bolt compatible with metric nuts and standard components? Yes, the Stud bolt DIN 6379 M16 x 250 mm tempered to 8.8 (AMF) is made to the DIN 6379 specification and is compatible with standard M16 nuts and mating parts manufactured to the same norm. How should the bolt be tightened to achieve correct clamping? Use a calibrated torque or tensioning tool and apply the manufacturer-recommended torque for M16 threads and strength class 8.8; controlled torque ensures the AMF stud bolt achieves the intended preload without overstressing the assembly. What is delivered in one packaging unit? Packaging unit 1 contains one AMF stud bolt, clearly labelled with SKU 4000833277NW for inventory and quality-traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Stud Bolt M20 Hardened Grade 8.8 DIN 6379, Threaded Length 160mm - AMF
Take advantage of a robust, DIN‑compliant fastening solution: the combination of DIN 6379 standardisation and property class 8.8 heat treatment ensures dependable clamp strength and consistent assembly performance; order directly via Metav Werkzeuge or consult our specialists for precise application advice. AMF Stud Bolt DIN 6379, M20 x 250 mm, Class 8.8 A AMF stud bolt (DIN 6379) designed for heavy‑duty fastening in mechanical assemblies, flanged joints and structural connections. Heat‑treated to property class 8.8 Conforms to DIN 6379 standard M20 metric thread for robust connections 250 mm overall length for deep assemblies Reliable connections for demanding assemblies The AMF stud bolt delivers a focused solution where repeatable, high‑strength joints are required. Conformance to DIN 6379 guarantees dimensional compatibility with matching nuts and components, reducing assembly errors and rework. The metric M20 thread, combined with the specified overall length of 250 mm, allows for secure engagement in flanged unions or layered assemblies. For production planners and maintenance engineers, this translates into shorter fitting times and predictable torque behaviour during tightening. Strength and material treatment explained Specified as property class 8.8, the fastener benefits from heat treatment that raises tensile strength and yield characteristics compared with untreated bolts. In practice, this means the stud is suitable for structural and mechanical applications that demand medium‑high strength without resorting to alloy or special‑grade fasteners. Compliance with DIN 6379 ensures that the fastener’s mechanical attributes and thread form meet established industrial tolerances, facilitating interchangeability across suppliers and simplifying procurement specifications. Application notes and installation benefit The stud’s length and thread size make it suitable for deep or multi‑layer assemblies where standard bolts would not provide sufficient engagement. A width value of 27 mm supports the use of standard spanners or sockets for installation, enabling consistent torque application and easier on‑site handling. Where downtime or alignment sensitivity is a concern, adopting a DIN‑based stud reduces the risk of incorrect part selection and contributes to stable joint life cycles, lowering maintenance frequency and supporting predictable production throughput. For assured supply and expert guidance on integrating AMF fasteners into industrial assemblies, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and availability Technical data Article number: 4000833286NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Packaging unit: 1 Core measurements Thread: M20 Overall length: 250 mm Width: 27 mm Addition: b: 160 Special features Heat‑treated to property class 8.8 Conforms to DIN 6379 Suitable for use in bolted and flanged connections FAQ What applications suit this stud bolt best? The stud bolt is intended for mechanical assemblies, flanged joints and structural connections where a DIN 6379‑compliant, heat‑treated fastener is required; the SKU 4000833286NW identifies this specific AMF item. How does property class 8.8 influence performance? Property class 8.8 indicates a heat‑treated medium‑high strength fastener; in practice, the AMF stud bolt provides reliable tensile and yield behaviour for many industrial fastening jobs without requiring specialised alloy grades. Is the thread form compatible with standard nuts and tools? Yes — the M20 metric thread follows standard thread specifications and pairs with standard M20 nuts and common spanner or socket sizes for secure tightening. Can this fastener be used in multi‑layer or deep assemblies? With an overall length of 250 mm, the stud is well suited to deeper stacks and multi‑layer joints, allowing sufficient thread engagement for robust clamping. What does DIN 6379 guarantee for procurement teams? DIN 6379 conformity ensures dimensional interchangeability and adherence to established industrial tolerances, simplifying supplier selection and quality assurance when specifying the AMF stud bolt (SKU 4000833286NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Stud Bolt DIN 6379 Quenched and Tempered Grade 8.8, M16 - AMF
Combine robust DIN 6379 conformity with a M16 thread and a 315 mm overall length to ensure dependable clamping in deep assemblies; the stud bolt’s quenched and tempered finish to property class 8.8 adds fatigue resistance for industrial use. Order the component directly via Metav Werkzeuge or contact our consultants for application advice. Stiftschraube DIN6379 M16x315mm – Stud bolt, property class 8.8 by AMF Stiftschraube DIN6379 M16x315mm – a high-strength stud bolt designed for secure fastening in workshop and industrial assemblies, compliant with DIN 6379 High tensile strength property class 8.8 DIN 6379 standardised geometry M16 thread for reliable fastening 315 mm overall length for deep assemblies Dependable strength for critical fastenings The stud bolt delivers a clear technical advantage through its property class 8.8 heat treatment and quenched and tempered condition, which together provide a high tensile strength and improved fatigue performance. Compliance with DIN 6379 ensures the fastener’s geometry is standardised, enabling predictable torque behaviour and consistent clamping force in series production. Such mechanical reliability reduces rework and supports uninterrupted assembly lines while maintaining safe load-bearing characteristics. Consistent dimensions that simplify installation Measured dimensions—M16 thread and an overall length of 315 mm, with a width of 19 mm—allow planners and fitters to design fixtures and blind-hole assemblies with confidence. The clear specification of thread size and length supports accurate component selection for through-bolting or stud-mounted fittings, reducing measuring effort on the shop floor. Precise sizing also helps match nuts, washers and threaded holes without trial fits, improving assembly throughput and reducing downtime. Robust finish and practical workshop use The fastener’s quenched and tempered finish to 8.8 provides a balance between strength and ductility, making it suitable for many standard industrial applications where reliable clamping is required. As a factory-standard fastening, this stud bolt by AMF fits routine maintenance and production tasks, offering longevity under cyclic loads. For procurement and supply chain assurance, relying on standardised parts simplifies stocking and avoids bespoke lead times. Contact Metav Werkzeuge for tailored application advice and to secure the AMF stud bolt 4000603361NW for dependable fastening solutions Technical data Article number: 4000603361NW Description: Stiftschraube DIN6379 M16x315mm, quenched to 8.8, AMF Manufacturer: AMF Product type: Stud bolt Packaging unit: 1 Facts Thread: M16 Overall length: 315 mm Width: 19 mm UID: 4000603361NW Additional dimension b: 180 mm Special features Quenched and tempered to property class 8.8 Complies with DIN 6379 FAQ What material condition does this stud bolt have? The AMF stud bolt is quenched and tempered to property class 8.8, giving it enhanced tensile and fatigue characteristics suited to industrial fastening. Which standard governs the geometry of this fastener? Geometry and dimensional tolerances follow DIN 6379, ensuring interchangeability and predictable performance in assemblies. What thread and length are specified for this item? This fastener features an M16 thread with an overall length of 315 mm, indicated on the article 4000603361NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Stud Bolt M20 Hardened 8.8, DIN 6379 - AMF
Reliable fixings for demanding assemblies: the combination of DIN 6379 compliance, M20 thread geometry and 315 mm overall length delivers consistent, high‑load connections; benefit from quenched and tempered steel in property class 8.8 and order the stud bolt directly via Metav Werkzeuge or consult our advisors. AMF stud bolt DIN 6379 — M20 x 315 mm, property class 8.8 The stud bolt DIN 6379 M20 x 315 mm is a precision fastener designed for secure, repeatable mechanical connections in industrial and workshop assemblies. DIN 6379 standardised thread geometry M20 thread for robust connections 315 mm overall length for deep assemblies Quenched and tempered, property class 8.8 Consistent fit and repeatable installation for production use Compliance with DIN 6379 ensures a predictable thread form and tight tolerances, which translates into consistent fit across batches. This reliability reduces assembly time and minimises the need for rework in repetitive production environments. The M20 thread dimension combined with the 315 mm length supports applications where extended engagement is required, such as coupling flanged components or securing long‑reach fittings. Specified tolerance adherence means fewer rejects and a smoother production flow. Strength and material treatment that cut maintenance intervals The component is quenched and tempered to property class 8.8, which indicates a high‑tensile performance level suitable for most structural and mechanical joints. In practice, this heat treatment raises yield and tensile strengths compared with untreated steel, so assemblies retain clamp force longer under cyclical loads. For engineers and maintenance planners, this equates to longer service intervals and lower lifecycle expenditure through reduced fastener replacement and downtime. Easy integration into existing assemblies and tooling Designed as a standard threaded stud, the threaded stud integrates with widely available nuts and washers without bespoke tooling. The nominal wrench dimension of 27 mm supports straightforward installation with common spanners or sockets, while the standardised thread profile promotes compatibility with existing mating parts. Clear specification allows planners to validate designs quickly and procurement to order with confidence, streamlining purchasing and saving specification time. For applications that prioritise standard compliance and tensile strength, contact Metav Werkzeuge to discuss the AMF stud bolt SKU 4000833287NW and obtain tailored fastener recommendations. Technical data Article number: 4000833287NW UID: 4000833287NW Brand: AMF Product type: stud bolt Dimensions & thread Thread: M20 Overall length: 315 mm Nominal width (wrench): 27 mm Addition: b = 200 Materials & features Standard: DIN 6379 Heat treatment: quenched and tempered to property class 8.8 Packaging unit: 1 FAQ What standard does this stud bolt conform to? The stud bolt conforms to DIN 6379, ensuring standardised thread geometry and predictable tolerances for industrial use. What are the key dimensions and how are they specified? The fastener is specified with an M20 thread and an overall length of 315 mm (SKU 4000833287NW), making it suitable for assemblies requiring extended engagement. What does property class 8.8 mean for performance? Property class 8.8 indicates the stud bolt has been quenched and tempered to provide elevated tensile and yield strength compared with untreated steel, suitable for demanding mechanical joints. Is the stud bolt compatible with standard nuts and washers? Yes, the thread is a standard M20 form per DIN 6379, which pairs with commercially available nuts and washers designed for that thread size. Who manufactures this stud bolt? This stud bolt is supplied under the AMF brand; for procurement and technical enquiries reference SKU 4000833287NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Stud Bolt M24 Heat Treated 8.8, DIN 6379 - AMF
Benefit from a combination of standard compliance, dependable tensile performance and precise metric threading for secure, long-lasting assemblies; order directly via Metav Werkzeuge or consult the advisors for specification support. Stiftschraube DIN6379 M24x315mm — Stud bolt, heat-treated to property class 8.8 (AMF) Stiftschraube DIN6379 M24x315mm is a metric stud bolt designed for reliable threaded connections in machinery and structural applications. Stud bolt DIN 6379, metric thread M24 Length 315 mm for deep threaded assemblies Heat-treated to property class 8.8 High-strength fastening for secure joints The stud bolt is specified to DIN 6379, providing dimensional compatibility with standard metric counterparts. Heat treatment to property class 8.8 gives the part elevated strength and improved fatigue resistance compared with untreated fasteners, which translates into safer clamping forces and longer service life in cyclical or load-bearing applications. The metric M24 thread and full 315 mm length ensure suitability for deep-engagement connections where full thread engagement and high clamping loads are required. Clear specification reduces installation risk With a defined thread size and standard compliance, the component simplifies procurement and assembly planning: an M24 thread fits matched nuts and tapped holes to common metric tolerances, and the declared overall length of 315 mm plus a threaded section of 200 mm helps determine required engagement and torque ranges. This clarity reduces the risk of incorrect part selection and minimises downtime from rework. The robust geometry supports consistent torque transfer and predictable joint behaviour in production environments. Practical benefits on the shop floor Choosing a standardised, heat-treated stud bolt means fewer surprises during assembly: improved clamping retention reduces the need for frequent retightening and supports maintenance intervals. The combination of standard conformity (DIN 6379) and a proven strength class makes the part particularly suited to mechanical assemblies, flanged connections and situations where vibration or alternating loads are present. Explanations of technical terms are straightforward: property class 8.8 denotes a quenched and tempered product with elevated tensile capability compared with basic grades, and DIN standards ensure interchangeability. Specification support and supply reliability Procurement and engineering teams benefit from transparent data and dependable supply. Metav’s distribution from Emmerich acts as a quality filter for the European market, pairing a wide product range with technical advice and reliable fulfilment. For projects where component traceability and consistent mechanical behaviour matter, the documented standard and material treatment reduce acceptance time and support conformity checks during inspection. For reliable high-strength fastenings, contact Metav Werkzeuge to discuss AMF stud bolts (SKU 4000833299NW) and arrange supply or technical clarification — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833299NW Product type: Stud bolt (Stiftschraube) Standard: DIN 6379 Dimensions & core data Overall length: 315 mm Thread: M24 Thread length (b): 200 mm Width (across flats / reference): 35 mm Materials & special features Heat-treated to property class 8.8 Packaging unit: 1 Label: Stiftschraube M24x315mm, tempered to 8.8, AMF FAQ What standard does this stud bolt conform to? The stud bolt conforms to DIN 6379, ensuring dimensional compatibility with metric mating parts and standard thread profiles. What does property class 8.8 mean for performance? Property class 8.8 indicates a heat-treated fastener with elevated tensile strength and improved fatigue resistance compared with non-heat-treated grades, making the stud bolt suitable for load-bearing assemblies. Is the thread specification compatible with common M24 nuts? Yes — the M24 thread is a standard metric size and will fit nuts and tapped holes manufactured to the corresponding metric tolerances. How long is the threaded section and why is that relevant? The threaded section is 200 mm (thread length b), which informs engagement calculations and helps determine required clamping length for secure joints. Can this stud bolt be used in vibrating environments? Due to its heat treatment and strength class, the stud bolt is well suited to applications with dynamic loads or vibration, where reliable clamping and fatigue resistance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Dowel Screw M24x400 Heat Treated 8.8, DIN 6379 - AMF
Take advantage of a standardised, high-strength fastening solution that combines conformity with DIN 6379, robust M24 threading and heat treatment to property class 8.8 for reliable joint integrity; order via Metav Werkzeuge or consult their technical advisers for specification support. AMF stud bolt DIN 6379 — M24 × 400 mm, property class 8.8 A AMF stud bolt DIN 6379 M24 x 400 mm, heat-treated to property class 8.8, designed for secure bolted connections in mechanical and structural assemblies Stud bolt to DIN 6379 standard Heat-treated to property class 8.8 M24 metric thread for high-strength fastening 400 mm overall length for deep assemblies Engineered for dependable, high-strength joints The stud is manufactured to the DIN 6379 specification, ensuring repeatable geometry and compatibility with standard M24 components. Heat treatment to property class 8.8 provides defined mechanical properties and improved fatigue resistance compared with untreated fasteners. These characteristics translate into consistent clamp force and reduced risk of connection loosening in demanding applications, supporting predictable maintenance intervals and reliable operational uptime. Dimensions and thread form that speed up assembly With an M24 metric thread and an overall length of 400 mm, the stud is suitable for deep fittings where standard-length fasteners are insufficient. The long engagement length enables secure thread engagement without extensions, while compatibility with standard M24 nuts and washers simplifies procurement and reduces the number of bespoke parts required. The result is a leaner assembly process with fewer handling steps and less downtime during installation. Proven quality and supply continuity for workshops Produced by a recognised industrial supplier and offered through Metav’s distribution, the fastener is intended for industrial and workshop environments where traceability and consistent quality matter. Sourcing via a supplier with a quality filter in Emmerich supports steady availability and batch consistency. The component’s specification and conformity to standards help maintain safety margins in structural and mechanical joints, offering long-term confidence in both new builds and retrofit projects. Contact Metav Werkzeuge for specialist advice on AMF stud bolts and to secure supply from the Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and availability Technical data Article number: 4000603368NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Designation: M24 x 400 mm, property class 8.8 Measurements Thread: M24 Overall length: 400 mm Width: 35 mm Materials & features Heat-treated to property class 8.8 Pack unit: 1 Additional note: Addition: b: 250 FAQ What does property class 8.8 mean for the stud bolt? Property class 8.8 indicates a heat-treated steel fastener with elevated mechanical properties; the AMF stud bolt in property class 8.8 is designed for higher tensile and yield strength than non-heat-treated equivalents, suitable for structural and mechanical load-bearing joints. Is this stud bolt compatible with standard M24 nuts and washers? Yes, the stud has an M24 metric thread and is designed to mate with standard M24 nuts and washers for conventional fastening arrangements. For which applications is the 400 mm overall length intended? The 400 mm overall length suits deep assemblies and situations where extended thread engagement is required, such as long flanges, stacked components or retrofits that exceed standard fastener lengths. Does the product conform to any recognised standard? The fastener complies with DIN 6379, providing standardised dimensions and tolerances for use in industrial and workshop applications. What information does the SKU 4000603368NW provide? SKU 4000603368NW uniquely identifies this AMF stud bolt variant (M24 x 400 mm, property class 8.8) for ordering and inventory tracking purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com