120mm Cross Arm For Quick Clamp Size 3, Screw DIN 933 M8x45 - AMF
Reliable compatibility with quick-action clamps and an adjustable screw spacing ensure consistent, repeatable setups. The 120 mm reach in a Size 3 format provides compact support for fixtures while enabling precise alignment. Order the AMF cross arm directly via Metav Werkzeuge or ask our consultants if needed. Cross arm No. 6895 (Size 3) — for quick-action clamps, 120 mm by AMF The Cross arm No. 6895 (Size 3) is a compact cross arm designed to interface with quick-action clamps for flexible workshop clamping and fixturing. Compact 120 mm reach for tight fixtures Designed for quick-action clamps compatibility Adjustable screw spacing 34–100 mm Prepared for M8 x 45 fastening Stable support that increases fixture repeatability The cross arm is specified with a 120 mm length to deliver a compact but effective lever for clamping arrangements. Installed in a fixture, the arm is intended to reduce setup time and to improve positional repeatability; its geometry supports stable force transmission in clamping systems. This stability is particularly relevant where repeatability and short cycle times determine throughput. The component is described as Size 3, which balances reach and robustness, making it suitable for smaller jigs where space is limited but clamping performance must not be compromised. Flexible mounting for varied clamping arrangements Mounting options are simplified by the 34–100 mm adjustable screw spacing and compatibility with M8 x 45 fastening. This range enables precise alignment of the arm to different clamp centres without the need for adapter plates, so setup changes can be completed with fewer parts and less downtime. The design is therefore well suited to modular clamping systems where components are frequently reconfigured. Where precision positioning is required, the adjustable spacing supports accurate, measurable alignment of the clamping interface. Efficient integration into workshop workflows As a Size 3 cross arm intended for quick-action clamps, the component is aimed at improving handling and operational speed in production and maintenance environments. The part number and type make it straightforward to order and to document in tooling lists: Type 6895, SKU 4123685003NW. Its compact format supports both one-off fixtures and repeated production runs, helping to streamline jig inventories. Reliability in everyday use is promoted by a design that prioritises compatibility and quick installation, reducing the time spent on fixture adjustments. For reliable quick-action clamping with AMF components, contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 4123685003NW Type: 6895 Label: Querarm Nr.6895 Gr.3 z.Schnellspanner AMF Manufacturer: AMF Packaging unit: 1 Dimensions / Core data Length: 120 mm Size: 3 Screw spacing: 34–100 mm Screw specification: M8 x 45 Features / Applications For quick-action clamps Cross arm for clamping systems Compact reach for tight fixtures Prepared for standard M8 fastening FAQ What is the main application of this cross arm? The cross arm No. 6895 is designed to interface with quick-action clamps and to serve as a compact support element in clamping systems and fixtures. Which screw size and spacing are associated with the arm? Compatibility is given for M8 x 45 fastening and an adjustable screw spacing of 34–100 mm, allowing flexible mounting in varied setups. Is the arm suitable for small jigs and confined spaces? Yes, the 120 mm reach and Size 3 format make the component appropriate for compact jigs where space is constrained but reliable clamping is required. How is the product identified for ordering or documentation? The part is listed as Type 6895 with SKU 4123685003NW, which should be used for precise ordering and inventory management. Can this arm be used with different brands of quick-action clamps? The arm is specified for quick-action clamps and prepared for standard M8 fastening; compatibility with other brands is enabled by standard screw dimensions and adjustable spacing Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31 mm Gegenhalter für Verschlussspanner Größe 1, B 6 mm C 19 mm D 8 mm G 4,5 mm H 22,7 mm - AMF
Gegenhalter Nr.6847G Gr.1 verz.AMF – Gegenhalter für Verschlussspanner 6847 Der Gegenhalter Nr.6847G Gr.1 verz.AMF dient zur sicheren Fixierung von Verschlussspannern 6847 und ermöglicht präzise Kraftübertragung bei Montage- und Spannvorgängen. Kompatibel mit Verschlussspanner 6847 Größe 1 für präzise Positionierung Länge 31 mm für platzsparende Montage Verzinkte Ausführung schützt vor Korrosion Verpackungseinheit 1: sofort einsetzbar Effizienzsteigerung durch kompakte Fixierungslösung Der Einsatz dieses Gegenhalters reduziert Rüstzeiten und minimiert Nacharbeit, weil die Kompatibilität mit dem Verschlussspanner 6847 sofortige Montage erlaubt. Die kompakte Baulänge sorgt für einfache Integration in bestehende Vorrichtungen, sodass Arbeitsprozesse flüssiger ablaufen und die Produktivität im Betrieb steigt. Dadurch ergeben sich klare wirtschaftliche Vorteile für Fertigung und Instandhaltung. Robustheit und Schutz im Praxisbetrieb Die Bezeichnung weist auf eine verzinkte Oberfläche hin, die zusätzlichen Korrosionsschutz bietet und die Lebensdauer verlängert. Durch die kompakte Bauweise und die präzise Maßführung sind Belastungen gleichmäßig verteilt, was die Standzeit der Gesamtkonstruktion erhöht. Die verzinkte Ausführung eignet sich besonders für Werkstätten und Montageumgebungen mit mäßiger Feuchtebelastung. Anwendungsspektrum und Anwendernutzen Entwickelt für Anwender, die Verschlussspanner der Serie 6847 einsetzen, bietet dieses Teil klare Vorteile bei der Wiederholgenauigkeit von Spannvorgängen. Der Gegenhalter ist besonders geeignet für Produktionslinien, Prüfplätze und Montagearbeitsplätze, an denen platzsparende und zuverlässige Befestigungen gefordert sind. Die einfache Handhabung spart Zeit bei der Einrichtung und sorgt für konstante Ergebnisse. Empfehlung: Das Original von AMF über Metav Werkzeuge beziehen und bei technischen Fragen den schnellen Beratungsservice per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 4000833523NW Marke: AMF Typ: 6847G Produktart: Gegenhalter Ausführung: für Verschlussspanner 6847 Verpackungseinheit: 1 Daten B [mm]: 6 C [mm]: 19 D [mm]: 8 G [mm]: 4,5 H [mm]: 22,7 K [mm]: 6 L [mm]: 31 M [mm]: 26-30 N [mm]: 40 O [mm]: 6,9 Besonderheiten Größe: 1 verz. = verzinkt, zusätzlicher Korrosionsschutz Kompatibel mit Verschlussspanner 6847 FAQ Was ist der Hauptzweck dieses Gegenhalters? Der Gegenhalter von AMF ist dafür vorgesehen, Drehmoment und Gegenkraft bei Verschlussspannern der Serie 6847 aufzunehmen und somit ein zuverlässiges Spannbild zu gewährleisten. Artikelnummer 4000833523NW identifiziert das exakte Bauteil. Für welche Anwendungen eignet sich der Gegenhalter besonders? Das Teil eignet sich für Montagearbeiten, Prüfstände und Serienfertigung, bei denen platzsparende und wiederholgenaue Befestigungen benötigt werden. Die verzinkte Ausführung erhöht die Einsatzdauer in Werkstattumgebungen. Welche Maße sind besonders relevant für die Integration in Vorrichtungen? Die Baulänge L beträgt 31 mm; weitere wichtige Maße sind H 22,7 mm und M 26-30 mm, die die Einbausituation und die Positionierbarkeit bestimmen. Wie wird das Bauteil ausgeliefert? Der Gegenhalter wird einzeln geliefert; die Verpackungseinheit beträgt 1, sodass das Teil direkt in die Montage übernommen werden kann. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Gegenhalter Größe 3 für Verschlussspanner, L 40mm / B 6mm / H 29mm, verzeigte Ausführung - AMF
Gegenhalter Nr.6847G Gr.3 verz.AMF — Gegenhalter von AMF Gegenhalter Nr.6847G Gr.3 verz.AMF ist ein kompakter Gegenhalter zur Verwendung mit Verschlussspannern der Baureihe 6847 und eignet sich für präzise Fixierung bei kurzen Montagezyklen Passend für Verschlussspanner 6847 Größe 3 für standardisierte Spannsysteme Länge 40 mm für kompakte Einbausituationen Verzinkte Oberfläche für verbesserten Korrosionsschutz Mehr Effizienz im Spannprozess Der Gegenhalter reduziert Rüstzeiten durch direkte Kompatibilität mit dem Verschlussspanner 6847 und erlaubt eine schnelle, wiederholgenaue Fixierung Bauteile. Durch die kompakte Länge 40 mm lässt sich das Bauteil nahe an der Spannstelle positionieren, was die Prozessstabilität erhöht und Ausschuss reduziert. Für Anwender bedeutet das weniger Nacharbeit und höhere Maschinenauslastung. Robuste Ausführung für lange Lebensdauer Die Ausführung als verzinkt ausgeführtes Teil bietet einen praktischen Schutz gegen Oberflächenkorrosion und verringert den Wartungsaufwand in feuchten oder teilkorrosiven Umgebungen. Die einfache Pflege und der reduzierte Materialverschleiß sorgen für planbare Standzeiten, wodurch Betriebskosten über mehrere Produktionszyklen gesenkt werden können. Praktische Maße und einfache Integration Mit dem einstellbaren Bereich M 31,3–35,8 mm passt der Halter sich verschiedenen Spannweiten an und erleichtert die Integration in vorhandene Vorrichtungen. Die klaren Maße wie B 6 mm oder H 22,7 mm ermöglichen eine einfache Planung bei der Konstruktion von Lehren und Spannplatten. Ein kurzer Exkurs: Ein Verschlussspanner ist ein Schnellspannsystem zur kraftschlüssigen Fixierung von Werkstücken, das in Montage und Zerspanung weit verbreitet ist. Zielgruppenorientierte Anwendung Geeignet ist das Produkt für Werkstatt, Fertigung und Montagebereiche, die auf standardisierte Spannlösungen setzen. Der Halter unterstützt Praktiker, die wiederholgenaue Positionierung und robuste Befestigung verlangen, und bietet kleinen und mittleren Betrieben eine einfache Möglichkeit, Spannprozesse zu optimieren und Durchlaufzeiten zu reduzieren. Empfehlung: Für zuverlässige Spannlösungen direkt bei Metav Werkzeuge bestellen oder technische Beratung per eMail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 4000833524NW Marke: AMF Typ: 6847G Produktart: Gegenhalter Ausführung: für Verschlussspanner 6847 Verpackungseinheit: 1 Fakten Größe: 3 L [mm]: 40 B [mm]: 6 C [mm]: 19 D [mm]: 10 G [mm]: 5,5 H [mm]: 22,7 K [mm]: 13 M [mm]: 31,3-35,8 N [mm]: 45 O [mm]: 10,9 Besonderheiten Passend für Verschlussspanner 6847 verz. (verzinkt: Zinkbeschichtung für Korrosionsschutz) Größe: 3 FAQ Ist der Gegenhalter mit allen Verschlussspannern kompatibel? Der Gegenhalter ist speziell für Verschlussspanner der Baureihe 6847 ausgelegt. Für andere Spannsysteme sind die Abmessungen zu prüfen; die Größe 3 gibt die standardisierte Passform vor. Welche Vorteile bringt die verzinkte Oberfläche? Die verzinkte Oberfläche des Gegenhalters reduziert Korrosionsrisiken und senkt damit den Wartungsaufwand; das erhöht die Lebensdauer in feuchteren Produktionsumgebungen. Wie wird der Gegenhalter befestigt und justiert? Die Befestigung erfolgt parallel zur Spannstelle; der einstellbare Bereich M 31,3–35,8 mm erlaubt die Anpassung an unterschiedliche Spannweiten, was die Integration in Vorrichtungen vereinfacht. Sind Ersatzteile oder alternative Größen verfügbar? AMF bietet verschiedene Größen und Ausführungen. Für spezifische Ersatzteile oder abweichende Maße empfiehlt sich die Rückfrage beim Händler mit Angabe der Artikelnummer 4000833524NW. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Gegenhalter für Verschlussspanner Größe 5, vernickelt - AMF
Gegenhalter Nr.6847G Gr.5 verz.AMF – Gegenhalter für Verschlussspanner Der Gegenhalter Nr.6847G Gr.5 verz.AMF dient als präzise Haltevorrichtung zur Gegenwirkung bei Verschlussspannern und ermöglicht sichere Fixierung und kontrollierte Kraftübertragung in Montage und Produktion. Für Verschlussspanner 6847 geeignet Größe 5 für kompakte Anwendungen Länge 55 mm für präzise Positionierung Verzinkte Oberfläche für Korrosionsschutz Robuste Ausführung, einfache Montage Hohe Passgenauigkeit reduziert Stillstandzeiten Der Gegenhalter wurde für den Einsatz mit dem Verschlussspanner 6847 entwickelt und bietet durch die Größe 5 eine präzise Passform, die Nacharbeit minimiert. Mit der Länge 55 mm und den fein abgestimmten Abmessungen gewährleistet das Bauteil konstante Lagerkräfte und wiederholbare Positionierung. Das Ergebnis ist eine spürbare Reduzierung von Rüstzeiten und Ausfallstunden, weil die Handhabung einfach ist und die Verbindung sicher sitzt. Korrosionsschutz und langlebige Oberfläche verlängern Lebenszyklen Die Bezeichnung weist auf eine verzinkte Oberfläche hin, die aktiven Korrosionsschutz bietet und so die Standzeit in feuchten Werkstattumgebungen erhöht. Durch die verzinkte Ausführung bleibt die Funktionsfläche frei von Oberflächenschäden, was die Wartungsintervalle verlängert und Ersatzteilbedarf verringert. Diese Eigenschaft sorgt für planbare Produktionszyklen und senkt die Gesamtkosten im Betrieb. Vielseitiger Einsatz und einfache Montage für den Alltag Der Einsatzbereich umfasst Werkstatt, Montage und industrielle Fertigung, wo schnelle, zuverlässige Gegenhalter benötigt werden. Das Produkt ist für den Einsatz mit dem genannten Spannsystem konzipiert; der Einstellbereich M 56,5–64 mm erlaubt flexible Anpassung an unterschiedliche Bauteildicken. Für Anwender, die keine Messspezialisten sind: Ein Gegenhalter übernimmt die Gegenkraft zum Spannmittel und verhindert das Mitdrehen oder Verdrehen von Teilen bei Montagearbeiten. Für technische Rückfragen oder Anpassungen an spezifische Anwendungen kontaktieren Sie unsere Fachberatung per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 — Metav Werkzeuge empfiehlt dieses präzise Zubehör für zuverlässige Montageprozesse. Produkteigenschaften Artikelnummer: 4000833525NW Marke: AMF Typ: 6847G Produktart: Gegenhalter Ausführung: für Verschlussspanner 6847 Verpackungseinheit: 1 Zahlen B: 12 mm C: 29 mm D: 15 mm G: 11,2 mm H: 49,1 mm K: 13 mm L: 55 mm M: 56,5–64 mm N: 86 mm O: 13,8 mm Besonderheiten Größe: 5 Verzinkt (Oberflächenbehandlung zur Korrosionsminderung) Kompatibel mit Verschlussspanner 6847 FAQ Wie erkenne ich, ob der Gegenhalter passt? Der Gegenhalter ist speziell kompatibel mit dem Verschlussspanner 6847; prüfen Sie die Maßangaben wie Länge 55 mm und den Einstellbereich M 56,5–64 mm; die SKU 4000833525NW hilft bei der eindeutigen Zuordnung. Ist der Gegenhalter für den Außeneinsatz geeignet? Die Bezeichnung deutet auf eine verzinkte Oberfläche hin, die grundlegenden Korrosionsschutz bietet; für dauerhaften Außeneinsatz empfiehlt sich eine projektspezifische Prüfung. Kann das Teil in der Serienfertigung eingesetzt werden? Ja, der Gegenhalter 6847G ist für wiederholte Montagezyklen konzipiert und reduziert durch seine Passgenauigkeit Rüst- und Stillstandzeiten. Welche Abmessungen sind für die Justage relevant? Wesentliche Maße sind L 55 mm, M 56,5–64 mm sowie die Seitenmaße B, C und D; diese Werte sind in den technischen Daten aufgeführt und ermöglichen präzise Justage. Womit lässt sich der Gegenhalter montieren? Die Montage erfolgt entsprechend der Ausführung für den Verschlussspanner 6847; einfache Handhabung und schnelle Installation werden durch die kompakte Bauform unterstützt. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10 Protective Cap For Quick Clamps, Size M10 SW16 D22 D1-15 H17.5 H1-8.5 - AMF
Benefit from reliable protection and a compact profile that keeps clamping threads free from dust and damage; the combination of an M10 fit and a secure 16 mm spanner width supports smoother production flow. Order the protective cap directly via Metav Werkzeuge or consult our specialists for integration advice. Protective cap No. 6893 M10 AMF — compact M10 cap for quick-release clamps Protective cap No. 6893 M10 AMF offers a compact, robust cover designed to protect threaded clamping elements in workshop and production environments. Protective cap for quick-release clamps Size M10, SW 16 mm for standard fittings External diameter 22 mm, compact profile Robust cover height 17.5 mm, secure fit Reliable protection for clamping components The protective cover safeguards exposed threads and mating surfaces, reducing contamination and the risk of mechanical damage. By shielding the M10 connection, the cap reduces the need for frequent cleaning and prevents premature wear on clamping hardware, which contributes directly to improved workshop efficiency. The product is particularly suitable for environments where chips, dust or incidental contact are common, helping to maintain consistent clamping performance and minimise unplanned stoppages. Precision dimensions for consistent assembly Designed to match standard sizes, the cap features a SW 16 mm engagement and a compact external 22 mm diameter that ensures compatibility with common quick-release systems. The smaller internal shoulder (D1 15 mm) and the two-stage height (H 17.5 mm, H1 8.5 mm) provide a secure seating and defined positional control. These measurable values make integration predictable in assemblies and support consistent handling during rapid tool changes or fixture swaps. Simple fitting that speeds up routine tasks The low-profile shape and precise geometry enable fast installation and removal without additional tools in most workflows. The cover’s contour secures over the threaded portion to deliver a snug grip while allowing swift access when adjustment or removal of the clamp is required. This practical handling reduces cycle-time on routine maintenance and contributes to a smoother production rhythm by keeping fixtures protected between operations. Trusted supply and integration into the workshop Sourcing from a reliable distributor reduces procurement complexity and supports steady stock levels for spare parts. The protective cap is intended for direct use with quick-release clamping systems and can be kept as a small replacement item to avoid delays. For detailed product matching and availability, Metav Werkzeuge acts as a central partner offering an extensive range of precision workshop components and can advise on suitable quantities for continuous operation. For secure clamping protection, request the AMF M10 protective cap through Metav Werkzeuge in Emmerich for dependable supply and technical guidance Technical data Article number: 4000604720NW Type: 6893 Label: Protective cap No. 6893 M10 AMF Brand: AMF Product type: Protective cap Application: for quick-release clamps UID: 4000604720NW Facts Size: M10 SW: 16 mm D: 22 mm D1: 15 mm H: 17.5 mm H1: 8.5 mm Special features Packaging unit: 10 Compact profile for space-saving protection Secure fit for standard clamping threads Intended for quick-release clamp applications FAQ What thread size does this cap fit? The protective cap No. 6893 M10 AMF is specified for an M10 thread size (SKU 4000604720NW). Will the cap work with nuts sized SW 16 mm? Yes, the geometry of the cap corresponds to an SW 16 mm engagement, providing a reliable fit with standard spanner sizes. What protection does the cap provide on the clamping element? The cover prevents dust ingress and offers mechanical protection against knocks and abrasions, helping to maintain clamping accuracy and prolong service life. Is the material specified for this protective cap? The product data for Protective cap No. 6893 M10 AMF (4000604720NW) does not list a material; suitability should be confirmed if specific chemical or temperature resistance is required. How is the product supplied for reordering? This protective cap is supplied in a packaging unit of 10 pieces for convenient replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M4 Protective Cap For Quick Clamps, Size M4 SW7 D11 H8.5 - AMF
Compact, low-profile protection for M4 clamping threads with precise hex engagement (SW 7 mm) and an outer diameter of 11 mm — combining reliable thread protection with simple installation. Order directly via Metav Werkzeuge or consult our specialists for application advice. Protective cap No. 6893 M4 AMF – protective cap for quick-release clamps, low-profile 11 mm The Protective cap No. 6893 M4 AMF is a compact protective cap designed to safeguard M4 threads on quick-release clamps in industrial clamping applications, providing a robust barrier against contamination while maintaining a low profile for close-fitting assemblies For quick-release clamps Size M4, compact dimensions Hex width SW 7 mm for secure fit Outer diameter 11 mm, low profile Proven thread protection that keeps clamping systems ready A small component can prevent significant downtime. The protective cap provides a straightforward protective function by covering M4 threads used in clamping assemblies, reducing the ingress of swarf, coolant and dirt. With an outer diameter of 11 mm and a low overall height, the cap preserves accessibility in tight assemblies while maintaining a stable contact surface. The measurable dimensions — including hex width SW 7 mm and contact diameter D1 7 mm — ensure a predictable fit on compatible quick-release spindles, so maintenance intervals and assembly checks are less frequent and more reliable. Simple fitment to accelerate maintenance and reduce handling time Installation is intentionally uncomplicated: the cap engages with the M4 thread and aligns via a hex engagement of SW 7 mm, enabling quick replacement without specialised tools. This low-complexity approach minimises handling time during routine servicing, supporting a lean workflow on the shop floor. The cap’s compact form factor (total height H 8.5 mm, seated height H1 4.2 mm) is designed for minimal protrusion, preventing interference with adjacent fixtures and enabling close stacking of components — a practical advantage in high-density clamping setups. Dependable supply and specification clarity for procurement teams Choosing components with clear, verifiable dimensions reduces procurement risk and simplifies inventory management. The cap’s specification set—Size M4, D 11 mm, SW 7 mm, H 8.5 mm, H1 4.2 mm—provides an objective basis for selection and replacement planning. For buyers and workshop managers seeking to consolidate suppliers, such defined technical data supports predictable lead times and stock control, contributing to consistent production performance. The AMF designation signals a component intended for industrial clamping contexts and aligns with standard workshop practices for accessory replacement. For fast supply and expert advice on compatibility with specific quick-release clamps, contact Metav Werkzeuge to secure the correct stock and confirm fitment across production lines. Technical data Article number: 4000604724NW Manufacturer: AMF Product type: Schutzkappe Label: Schutzkappe Nr.6893 M4 AMF Execution: for quick-release clamps Packaging unit: 1 Facts Size: M4 SW: 7 mm D: 11 mm D1: 7 mm H: 8.5 mm H1: 4.2 mm Special features Compact protective cap design Fits M4 threads Low-profile outer diameter Suitable for clamping applications FAQ What is the primary purpose of this cap? The protective cap No. 6893 M4 AMF protects M4 threads on quick-release clamps from contamination and mechanical damage, preserving thread integrity for longer service intervals. Which dimensions define compatibility with clamping spindles? Compatibility is determined by the cap’s key dimensions: Size M4, outer diameter 11 mm, hex width SW 7 mm, and heights H 8.5 mm / H1 4.2 mm as specified for the 4000604724NW SKU. Can this cap be used on other M4 fittings? The cap is designed for M4 threads and hex engagement of SW 7 mm; it can be used with other M4 fittings if those dimensions match the intended seating and clearance. How does the cap affect assembly clearance? With a low overall height and compact diameter, the cap limits protrusion into neighbouring assemblies, maintaining close clearances while providing protective coverage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5 Protective Cap for Quick Clamps Size M5, SW 8 D12.5 D1 8 H10 H1 5 - AMF
Combining compact M5 sizing, precise dimensional fit (SW 8 mm, Ø 12.5 mm) and straightforward replacement for quick-clamping systems, this protective cap preserves threads and reduces maintenance interruptions; order the Protective Cap No. 6893 M5 via Metav Werkzeuge or consult our specialists for application advice. Protective Cap No. 6893 M5 — Quick-clamp cap, M5 size, AMF Protective Cap No. 6893 M5 is a compact protective cap designed for M5 quick clamps, providing secure thread protection and reliable end-covering in clamping technology applications. Designed for quick clamps Size M5, SW 8 mm Diameter 12.5 mm for secure fit Packaged in units of 10 Reduce downtime with secure thread protection A small component with a big effect: the protective cap guards exposed M5 threads on quick-clamping hardware, preventing contamination, nicks and accidental deformation. With a snug outer diameter of 12.5 mm and an internal contact diameter of 8 mm, the cap preserves thread geometry during storage and transfer, which translates to fewer rework cycles and reduced machine downtime. The measurable fit parameters make compatibility checks straightforward and support efficient inventory planning. Compact dimensions for versatile clamping setups The cap’s compact height and shoulder dimensions (overall height 10 mm, seating height 5 mm) allow it to be used in confined fixtures and crowded tool setups without interfering with adjacent components. The specified SW 8 mm engagement clearance ensures the cap fits common wrench access and assembly conditions for clamping assemblies. This dimensional clarity simplifies procurement and replacement decisions in production environments, enabling quick swaps with minimal interruption to setup procedures. Simple logistics and consistent stock handling Supplied in a packaging unit of 10, the component is suitable for routine maintenance batches and small-series operations. Standardised sizes reduce ordering complexity and support predictable stock rotation. Clear numeric data on the cap’s geometry enables integration into parts lists and procurement systems, helping maintain consistent supply to the workbench. The combination of compact storage quantities and defined fitting dimensions contributes directly to operational reliability. For secure clamping and fast, reliable replacement of worn end caps, request the AMF Protective Cap No. 6893 M5 from Metav Werkzeuge — our specialists are available to advise on fit and application at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000604725NW Type: 6893 Label: Schutzkappe Nr.6893 M5 AMF Product type: Protective cap Manufacturer: AMF Packaging unit: 10 Facts Size: M5 SW: 8 mm D: 12.5 mm D1: 8 mm H: 10 mm H1: 5 mm Special features For quick clamps Brand: AMF Supplied in packs of 10 FAQ Is this cap suitable for M5 quick-clamping systems? Yes. The Protective Cap No. 6893 M5 is specified for M5 thread interfaces and designed for use with quick clamps to protect exposed threads. What are the key dimensions to check for compatibility? Check the outer diameter (12.5 mm), the internal contact diameter (8 mm) and the overall height (10 mm); these dimensions determine a secure fit. How is the product supplied for maintenance tasks? The component is supplied in a packaging unit of 10, which supports small-scale maintenance and staged replacements. Can the cap prevent damage during storage and transport? Yes. By covering the thread and providing a protective shell, the cap reduces the risk of contamination, abrasion and mechanical damage during handling. Does the product require a specific wrench size for assembly or removal? The cap’s design accounts for a SW 8 mm clearance often found in clamping arrangements; this facilitates removal and checking without additional disassembly. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 Protective Cap For Quick Clamps Size M6, SW10 D15 D1-10 H12 H1-6 - AMF
Take advantage of precise dimensional accuracy and a secure M6 thread fit combined with compact dimensions to protect clamp threads and reduce maintenance downtime. Order the protective cap directly via Metav Werkzeuge or consult our technical team for compatibility advice. Protective cap No. 6893 M6 (AMF) – for quick clamps, M6 thread, compact design Protective cap No. 6893 M6 (AMF) is a compact protective cover engineered to shield M6 threads on quick‑action clamps in workshop and industrial settings. Secure M6 thread fit Designed for quick clamps Compact dimensions: D 15 x H 12 mm Precise protection for clamp threads that reduces downtime The protective cover delivers a consistent M6 fit based on exact dimensions (SW 10 mm, D 15 mm, H 12 mm), ensuring reliable seating on quick‑action clamps. This dimensional precision minimises thread wear and contamination, which in turn reduces unscheduled maintenance and production interruptions. The measured design preserves clamp tolerances and contributes to a more predictable service life for clamping assemblies. Easy to specify and integrate into existing clamping systems With its dedicated design for quick clamps, the guard is straightforward to specify in bills of materials and replacement part lists. The compact footprint allows retrofitting without altering clamp geometry, so fitment is often immediate and hassle‑free. Clear dimensional data simplifies procurement and inventory management for workshop supervisors and purchasing specialists who prioritise compatibility and traceability. Practical benefits for everyday workshop use Beyond protection, the part functions as a simple risk‑mitigation component: it prevents ingress of chips and coolant into threads and reduces the chance of accidental injury from exposed fasteners. The small form factor and defined seat height (H1 6 mm) make it suitable for dense assemblies where space is limited. The result is fewer clamp replacements, lower long‑term operating costs and a tidier, safer workbench. For fitting advice or to secure supply of this AMF protective cap, contact Metav Werkzeuge today — our specialists in precision workshop supplies assist with selection and rapid delivery from Emmerich. Technical data Article number: 4000604726NW Type: 6893 Name: Protective cap No. 6893 M6 AMF Brand: AMF Product type: Protective cap Execution: for quick clamps Package unit: 10 UID: 4000604726NW Facts Size: M6 SW: 10 mm D: 15 mm D1: 10 mm H: 12 mm H1: 6 mm Special features For quick‑action clamps Thread protection for reduced wear Compact protective cover design FAQ What does the cap protect on quick clamps? The protective cap shields the exposed M6 thread on quick clamps; the Protective cap No. 6893 M6 (AMF) prevents contamination and reduces thread wear. Is the cap compatible with standard M6 clamp designs? Compatibility is based on the specified dimensions (SW 10 mm, D 15 mm, H 12 mm); the cap fits standard M6 interfaces used on many quick‑action clamps and is supplied as SKU 4000604726NW. How is the cap supplied and in what quantity? The item is supplied in a package unit of 10, suitable for stocking common spare parts sets. Can the cap reduce maintenance frequency? Yes. By preventing debris and corrosion on critical threads, the cap helps extend clamp service intervals and lowers the risk of unscheduled replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 Protective Cap For Quick-Acting Clamp, Size M8 SW13 D19 D1-13 H15 H1-7.5 - AMF
Take advantage of a compact, maintenance-light solution that protects quick-action clamping threads and reduces contamination risk; the M8 size and precise dimensions ensure consistent compatibility and simple installation. Order the protective cap directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Protective cap No. 6893 M8 for quick-release clamps by AMF — compact M8 dust protection with precise fit A Protective cap No. 6893 M8 AMF designed for protecting the threaded elements of quick-action clamps in workshop and industrial environments, providing reliable dust and debris protection without affecting clamp operation Size M8, exact fit for threaded fastenings Hex width SW 13 mm for easy installation Outer diameter D 19 mm for secure coverage Height H 15 mm for compact protection Reliable thread protection for uninterrupted production The compact protective cover provides a straightforward way to safeguard clamp threads against contamination and mechanical damage, improving uptime and reducing maintenance cycles. With an M8 nominal size and a hex width of SW 13 mm, the cap sits securely on the fastening point while maintaining full operability of the quick-release mechanism. The design minimises the ingress of chips and fine dust, which in turn lowers wear on mating parts and contributes to more consistent clamping behaviour over time. The clear dimensional specification supports predictable integration into existing workstations and fixture setups. Simple handling that speeds assembly and replacement Quick assembly is achieved via the defined hex interface and standard dimensions, enabling rapid fitting and replacement during routine checks or tool changes. The externally measurable values — D 19 mm and H 15 mm with a smaller internal shoulder of D1 13 mm and H1 7.5 mm — allow technicians to anticipate spatial requirements and clearance envelopes when planning fixturing or protective schemes. This predictable geometry reduces downtime during maintenance and makes stock management easier for purchasing teams who require consistent, repeatable components in small parts inventory. Suited to workshop and industrial environments Specifically intended for use with quick-action clamps, the cap is a pragmatic addition to any shop floor aiming to protect valuable clamping hardware. The concise form factor keeps work areas tidy and prevents inadvertent contact with threads during handling. Where process reliability and repeatability matter, this small protective element supports broader quality objectives by helping to preserve thread integrity and reduce the likelihood of rework due to contaminated fastenings. Contact Metav Werkzeuge for application advice or to request delivery from our Emmerich centre — reliable guidance and direct supply for precision workshop needs Technical Data Article number: 4000604727NW Type: 6893 Product: Protective cap No. 6893 M8 AMF Application: for quick-release clamps Packaging unit: 10 Manufacturer: AMF Facts Size: M8 SW [mm]: 13 D [mm]: 19 D1 [mm]: 13 H [mm]: 15 H1 [mm]: 7.5 Special features Compact protection for threaded fastenings Designed for quick-action clamp systems Precise external and internal dimensions for predictable fit FAQ What thread size does the protective cap fit? The protective cap fits an M8 thread and is specified as Protective cap No. 6893 M8 AMF (SKU 4000604727NW). Can this cap be used with any quick-action clamp? Compatibility depends on the clamp's thread and clearance; the Protective cap No. 6893 M8 is made for quick-release clamps with an M8 fastening and matching hex clearance (SW 13 mm). What are the external dimensions for planning purposes? External diameter is 19 mm with a total height of 15 mm, enabling straightforward envelope checks during fixture layout. How is the cap supplied for stock management? The item is supplied in packaging units of 10, which assists in small-parts inventory planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com