The combination of HSS construction, a 118° point geometry and a secure cylindrical shank provides precise contour drilling and reliable tool life; benefit from a compact 90 mm overall length and standard 8 mm shank for straightforward integration into common toolholders. Order or request technical advice directly via Metav Werkzeuge for procurement and application guidance. Universal milling drill D8 mm HSS — 118° tip, cylindrical shank (PTG) The Universal milling drill D8 mm HSS is a compact cutting tool for combined drilling and contour milling across a range of workshop materials. HSS material for reliable cutting performance 118° tip for precise centre and contour work Cylindrical shank Ø8 mm for secure tool holding Right-hand cutting for standard machine setups Precision where productivity counts The solid HSS construction delivers consistent cutting behaviour and wear resistance under typical workshop conditions. With a 118° tip angle, the cutter centres cleanly and keeps entry burrs to a minimum, which enhances finish quality when drilling and milling contours. The 8 mm nominal diameter and slim profile support tight-radius work without compromising rigidity, making the tool suitable for tasks that demand repeatable precision rather than heavy stock removal. The tool is supplied uncoated, allowing predictable cutting characteristics and straightforward regrinding cycles. One tool for multiple materials and tasks Designed as a universal cutter, the tool is optimised for use in steel, non-ferrous metals, wood and plastic, enabling fewer tool changes in mixed-material production runs. The combination of sharp geometry and right-hand cutting direction provides clean chip formation when contouring profiles or producing small bores, reducing secondary finishing. For operations that switch frequently between task types, this versatility translates into improved throughput and simpler tool logistics, while maintaining surface quality across different substrates. Compatibility and secure clamping for fast setup A cylindrical shank of 8 mm diameter and a total length of 90 mm permit reliable clamping in standard collets and drill chucks, ensuring concentricity and minimised runout during rotation. The straightforward shank form reduces set-up time and supports automated change systems in compact machining centres. As a compact universal cutter, it minimises inventory complexity: a single tool covers centre-drilling, contour milling and finishing steps in small- to medium-batch production, helping to keep workflows efficient and predictable. For procurement, technical matching or to discuss suitability for specific applications, contact Metav Werkzeuge — Metav’s specialists can assist with ordering and provide application advice; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: 4000861901NW Product: Universal milling drill Material: HSS Nominal diameter: 8 mm Dimensions & core data Total length: 90 mm Shank diameter: 8 mm Tip angle: 118° Cutting direction: Right-hand Shaft type: Cylindrical shank Packaging unit: 1 Applications & features For drilling and contour milling in steel, non-ferrous metals, wood and plastic Uncoated Suitable for standard collet and chuck clamping FAQ Which materials can be machined with this cutter? The Universal milling drill D8 mm HSS is designed for steel, non-ferrous metals, wood and plastic; it handles contour milling and small bore drilling across these substrates. Is the tool coated for enhanced wear resistance? This cutter is supplied uncoated, offering consistent cutting behaviour and straightforward regrinding when required. What are the shank and overall dimensions? Shank diameter is 8 mm with a total length of 90 mm, suitable for standard collet and chuck systems. What tip geometry does the tool use and why? A 118° point ensures accurate centring and reduced entry burrs, improving finish quality during combined drilling and contouring tasks. Can the cutter be used in automated tool-change systems? The cylindrical shank and standard 8 mm diameter support secure clamping and are compatible with common automated and manual tool-holding equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust HSS construction and a 118° tip angle for dependable contour drilling and light milling across a wide range of materials; order directly via Metav Werkzeuge or contact their advisers for application guidance. Universal milling drill Ø 6 mm HSS — cylindrical shank, 118° tip for contour drilling The Universal milling drill Ø 6 mm HSS is a right-hand cutting tool intended for drilling and contour milling in steel, non-ferrous metals, wood and plastics, supplied with a cylindrical shank for straightforward clamping in standard tool holders. HSS cutting material for long life 118° tip for precise centre drilling Cylindrical shank Ø 6 mm for secure clamping Efficient machining performance for everyday workshop tasks The HSS construction delivers a reliable balance of toughness and wear resistance for general-purpose cutting. With a 118° tip angle, the tool produces a well-centred start and reduced burr formation, which shortens follow-up finishing work. Because the geometry combines drilling and light milling capabilities, one tool can reduce tool changes and increase throughput in mixed-material jobs, making production runs smoother and set-up times shorter. Practical shank design and handling for secure set-up A cylindrical shank with a diameter of 6 mm ensures stable clamping in collets and drill chucks commonly used in workshops. The overall length of 90 mm provides sufficient reach for contour work while keeping tool overhang low to preserve rigidity. Right-hand cutting direction suits conventional rotary equipment; the uncoated finish keeps the tool versatile for a range of speeds and feeds without specialised coating compatibility. Clear material compatibility and machining results Designed for use in steel, non-ferrous metals, wood and plastics, the drill is a practical option when a single, generalist tool is preferred. For steel applications, HSS permits moderate cutting speeds with good edge retention; when applied to aluminium or brass, the geometry helps prevent built-up edge and ensures cleaner holes and contours. For softer substrates such as wood and plastics, the same tool reduces inventory complexity without sacrificing finish quality. Simple specification that supports reliable procurement Key technical values are straightforward and verifiable: Ø 6 mm nominal diameter, 90 mm overall length, 118° tip and a cylindrical 6 mm shank. These measurable parameters make it easy to compare the tool with existing tooling, plan clamping fixtures and calculate maximum allowable overhang for given spindle speeds. The uncoated HSS grade permits resharpening where required, extending usable life and supporting sustainable workshop practice. Contact Metav Werkzeuge for tailored application advice or to arrange delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000861900NW Product name: Universal milling drill Ø 6 mm HSS Material: HSS Overall length: 90 mm Nominal diameter: 6 mm Facts Tip angle: 118° Cutting direction: Right-hand Shank type: Cylindrical shank Shank diameter: 6 mm Coating: uncoated Packaging unit: 1 Applications and features For drilling and contour milling in steel Suitable for non-ferrous metals, wood and plastics Uncoated HSS for general-purpose cutting Right-hand cutting for conventional machining FAQ What materials can this tool machine effectively? The Universal milling drill Ø 6 mm HSS (SKU 4000861900NW) is suitable for steel, non-ferrous metals, wood and plastics, offering a versatile option for mixed-material production tasks. Why is the 118° tip angle important? A 118° tip gives improved centring and reduced burrs on entry, which helps to improve hole quality and minimise the need for secondary finishing when using the Universal milling drill. Is the cutting tool coated? The tool is supplied uncoated, which makes it suitable for a wide range of speeds and allows straightforward resharpening where required. What shank and clamping dimensions are specified? The tool has a cylindrical shank with a diameter of 6 mm and an overall length of 90 mm, enabling secure clamping in standard collets and chucks. Can the tool be resharpened? Yes. The uncoated HSS material is commonly resharpened in workshops, allowing extension of the tool’s service life and supporting cost-effective use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com