150mm Clamping Base Nr. 6500E Size 2 Universal, H Min. 39 H Max. 107 - AMF
Take advantage of a compact, universal clamping underlay set that offers a broad adjustable height range for flexible fixture setups; the combination of simple integration and reliable support helps keep clamping cycles consistent and reduces setup time. Order or request further application advice via Metav Werkzeuge for fast supply from Emmerich. AMF clamping underlay set No. 6500E – Size 2, adjustable 39–107 mm The AMF clamping underlay set No. 6500E – Size 2 is a universal support solution for workshop and industrial clamping tasks, designed to bridge jaw differences and secure varied workpieces with stability. Universal clamping underlay set from AMF Adjustable height range 39–107 mm Compact format A 35.5 × B 30 × C 66 Reliable support that shortens setup time The clamping underlay set provides a stable support surface that is intended to reduce repeated repositioning during setup. By offering a consistent bearing area beneath the clamped workpiece, the set helps to distribute clamping forces evenly, which can lower the likelihood of workpiece distortion and speed up the overall fixture process. Operators will find that fixtures require fewer intermediate adjustments when a dedicated support plate is used, making repetitive production runs more efficient while maintaining repeatability. Precision adjustment across a wide height range Designed with an adjustable height from 39–107 mm, the set allows compensation for differing jaw heights and workpiece thicknesses without additional shims. The specified dimensions A 35.5 mm, B 30 mm and C 66 mm describe the compact footprint and clearance values that make the underlay easy to position inside standard vises and clamping fixtures. These measurable parameters support planning and help integrate the component into existing clamping systems; installers can match the values to jaw geometry to ensure correct seating and safe force transfer. Universal compatibility for workshop and production use Built for versatility, the set is intended for broad application across toolrooms, maintenance workshops and light production environments where flexible fixturing is required. The universal design reduces the need for multiple bespoke supports, saving space and simplifying inventory. The low-profile format supports accessibility to the clamping area while protecting key contact surfaces; in practice, this can extend the lifetime of jaw faces and reduce maintenance intervals for clamping equipment. Contact Metav Werkzeuge for tailored advice on application scenarios and to secure supply of the AMF clamping underlay set directly from our Emmerich stock Technical Data Article number: 4000833091NW Type designation: Nr. 6500E - 2 Product name: Clamping underlay set No. 6500E Size 2 Brand: AMF Product category: Clamping underlay set Packaging unit: 1 UID: 4000833091NW Facts H min: 39 mm H max: 107 mm A: 35.5 mm B: 30 mm C: 66 mm Special features Universal application for varied clamping tasks Compact footprint for easy integration Intended to support consistent clamping force distribution Simple handling for faster setup FAQ What height range does the clamping underlay set cover? The AMF clamping underlay set No. 6500E – Size 2 covers an adjustable height range from 39 mm to 107 mm for compensating jaw and workpiece variations. Is the set suitable for integration in standard vises and fixtures? Yes, the compact dimensions (A 35.5 mm, B 30 mm, C 66 mm) are intended to facilitate integration with common vise and fixture geometries. Which applications are typical for this clamping underlay set? The set is suited to workshop fixturing, toolroom use and light production environments where a universal support is required to level or lift workpieces during clamping. Is the material specified for the underlay set? No specific material information is provided for the AMF clamping underlay set in the available data. How many sets are supplied per packaging unit? The product is listed with a packaging unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Clamping Pad Set Universal Size 3 H Min 71 H Max 208 - AMF
Combining an adjustable height range (71–208 mm) with universal applicability, this clamping shim set delivers reliable, repeatable support across varied clamping tasks; order the AMF unit directly via Metav Werkzeuge or consult our specialists for tailored advice. AMF Clamping shim set Nr. 6500E - 3 — Adjustable height 71–208 mm AMF Clamping shim set Nr. 6500E - 3 provides a versatile support solution for workshop and production clamping, offering a wide height range and compact size for standard fixture setups Adjustable height 71–208 mm Universal application for clamping Size 3 for standard setups Single-piece packaging for easy stocking Faster, more reliable set-ups through adjustable support The AMF clamping shim set Nr. 6500E - 3 reduces fixture fine-tuning by offering a clear adjustable height range from 71 to 208 mm, enabling fewer intermediate shims and quicker cycle starts. The controlled height increments cut down on set-up variance, increasing clamping accuracy and lowering scrap rates. For production environments, this translates into measurable time savings per job and improved throughput without compromising positional repeatability. Consistent support that suits many tasks The combination of dimensions A: 68 mm, B: 30 mm and C: 131 mm delivers a stable bearing surface that resists tilting under load. The unit’s universal application makes it suitable for a wide range of clamping tasks in the workshop, where consistent vertical support is required. Using defined dimensional data simplifies fixture planning and allows engineers to standardise processes, reducing the number of bespoke supports needed across different jobs. Practical handling and integration in workflows Designed as a compact clamping shim set, the product is supplied as a single packaged unit for straightforward inventory management. Its clear specification allows rapid assessment during job planning and makes it simple to include in standard operating procedures. The modular nature of height adjustment supports incremental optimisation of clamping forces, which helps maintain component integrity during machining and assembly operations. Durable performance that supports quality control With clearly stated geometry and a wide height span, the set supports reproducible clamping sequences and aids quality assurance measures. The defined heights enable easier measurement and documentation of fixturing parameters, improving inspection traceability. By standardising on components with documented dimensions, shops can reduce variability between shifts and operators, contributing to long-term process stability. For a reliable clamping standard from AMF, contact Metav Werkzeuge for expert guidance and procurement at Metav’s Emmerich location — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixturing requirements Technical data Article number: 4000833092NW Type: Nr. 6500E - 3 Label: Spannunterlage Nr.6500E Gr.3 universell einsetzbar AMF Manufacturer: AMF Product type: Clamping shim set Packaging unit: 1 UID: 4000833092NW Dimensions / Core data Height min: 71 mm Height max: 208 mm A: 68 mm B: 30 mm C: 131 mm Special features Universally applicable for clamping tasks Size: Gr.3 Single-piece packaging FAQ What height range does the clamping shim set cover? The AMF clamping shim set Nr. 6500E - 3 covers an adjustable height range of 71–208 mm, suitable for a variety of fixture heights. Is this product suitable for general workshop use? Yes, the unit’s universal application and defined dimensions make it appropriate for general workshop and production clamping tasks. How is the product supplied? The clamping shim set is supplied as a single packaged unit (packaging unit: 1), simplifying stock handling. Can the shim set improve set-up times? Using the defined height range and standardised dimensions reduces the need for custom shims and helps shorten fixture set-up times. What is the article number for ordering? Order reference: Article number 4000833092NW, Type Nr. 6500E - 3 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Clamping Shim Set 20pcs Universal H22-H208 - AMF
Take advantage of the combination of universal compatibility and a wide height range (H 22–208 mm) for faster, more accurate set-ups; order the AMF clamping shim set directly via Metav Werkzeuge or ask our consultants for technical advice. Clamping shim set No. 6500H – universal, adjustable heights, AMF The Clamping shim set No. 6500H is a universal accessory for fine height adjustment and dependable workholding in machining, fixture assembly and workshop set-ups. Universal clamping shim set, versatile for fixtures Height range H 22–208 mm for flexible stacking Compatible with standard clamping systems Repeatable alignment for production environments Precise height control reduces setup iterations The set is designed to provide precise incremental adjustments across a broad height range, enabling accurate alignment without time-consuming rework. With an effective H 22–208 mm span, the shims permit stepwise correction where minute height differences matter; this reduces the need for re-machining or improvised packing. In practice, the collection of stackable shims supports consistent repeatability in successive set-ups, which improves process reliability and reduces downstream quality checks. Flexible compatibility for various clamping arrangements Thanks to its universal concept, the collection works with common clamping elements and fixture plates typically used in production and toolroom environments. The multi-piece arrangement allows incremental adjustment instead of modifying workpieces or fixtures, so components can be centred and secured quickly. For procurement and planning, this means fewer bespoke parts and a versatile inventory item that adapts across jobs — a practical choice for workshops that handle diverse materials and workpiece geometries. Easier organisation, faster throughput Organising the shims as a ready set simplifies daily handling and shortens machine downtime during changeovers. The multi-piece set supports stepwise stacking for micrometric corrections and helps maintain consistent clamping geometry during repetitive runs. This benefit translates into reduced set-up time and lower scrap rates, delivering a measurable operational advantage in both single-shift and continuous production scenarios. For dependable, repeatable set-ups choose the AMF No. 6500H clamping shim set — contact Metav Werkzeuge for tailored advice and quick supply from Emmerich (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: 4000833088NW Type: Nr. 6500H Name: Clamping shim set No. 6500H, universal AMF Manufacturer: AMF Packaging unit: 1 UID: 4000833088NW Data H min.: 22 mm H max.: 208 mm Special features Clamping shim set (universal) Multi-piece set: 20 pieces Brand: AMF FAQ What is the adjustable height range of the set? The AMF clamping shim set No. 6500H provides a height range from H 22 mm to H 208 mm, allowing fine incremental adjustments for accurate workpiece positioning (SKU 4000833088NW). Can the shims be used with standard clamping systems? Yes, the set is designed as a universal collection compatible with typical clamping elements and fixture plates used in machining and assembly. How does the multi-piece design benefit set-up work? The multi-piece arrangement enables incremental stacking for micrometric height correction, so fixtures can be adjusted without permanent modification — improving throughput and reducing rework. Is the set suitable for precision fixture work? The No. 6500H collection supports precise alignment and repeatable clamping geometry, making it appropriate for precision fixture building and maintenance tasks in production environments. How many pieces are included in the set? The AMF No. 6500H set consists of 20 pieces as indicated in the product description (SKU 4000833088NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23–51mm Clamping Support Pad Set Universal, Size 1 - AMF
Take advantage of the combination of adjustable height range (23–51 mm) and compact Gr.1 sizing to achieve consistent, repeatable clamping without lengthy setup. Order the set directly via Metav Werkzeuge or request technical guidance for integration into existing clamping systems. Clamping shim set No. 6500E – Gr.1, adjustable 23–51 mm (AMF) The Clamping shim set No. 6500E Gr.1 from AMF provides a compact, universally applicable solution for fine height adjustment in clamping setups. Variable height range 23–51 mm Universal application for clamping tasks Compact Gr.1 for confined workspaces Repeatable positioning and quick stacking Reliable height compensation that reduces setup time A clamping shim set such as the No. 6500E Gr.1 is designed to provide precise height compensation between clamping elements and workpieces. With a height range of 23–51 mm, the set removes the need for improvised shimming and repeated adjustments, enabling faster fixture set-up and shorter machine idle time. The numerical values H min: 23 mm and H max: 51 mm indicate the minimum and maximum achievable stack height; the clear range supports predictable results in jigs and vice fixtures. For production environments, this translates into measurable time savings and fewer reworks caused by misalignment. Defined contact dimensions for stable clamping and predictable force distribution The shim geometry is specified by A: 19 mm, B: 30 mm and C: 33 mm, which describe the relevant contact widths and effective seating dimensions. These nominal measures ensure a consistent interface with commonly used clamping components and enable correct load distribution across the contact surfaces. Using defined contact dimensions improves clamping stability and reduces the risk of localised deformation under clamping loads. In practical terms, such predictability supports repeatable precision and simplifies quality assurance procedures. Universality and workflow benefits for workshops and production lines Thanks to its universal application, this shim set suits a wide variety of clamping scenarios in both maintenance and production. The compact Gr.1 format is especially useful where space is restricted or when fine stacking is required to reach exact heights. By adopting standardised shims, procurement and stockkeeping become simpler, and changeovers are quicker because the same set can address multiple fixturing tasks. The result is a pragmatic combination of efficiency and adaptability that aligns with modern lean workflows. For reliable integration into existing jigs and fixtures, contact Metav Werkzeuge for availability and technical assistance at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will advise on matching the No. 6500E Gr.1 to specific clamping systems. Technical Data Article number: 4000833090NW Typ: Nr. 6500E - 1 Label: Spannunterlage Nr.6500E Gr.1 universell einsetzbar AMF Dimensions / Core Data H min: 23 mm H max: 51 mm A: 19 mm B: 30 mm C: 33 mm Special features / Versions Product type: Clamping shim set Brand: AMF Universal application: yes Packaging unit: 1 FAQ What height range does the shim set cover? The set covers a height range from 23 mm to 51 mm, enabling precise height compensation for a variety of clamping setups. Which contact dimensions define the shim geometry? The key contact dimensions are A: 19 mm, B: 30 mm and C: 33 mm, which determine seating and load distribution characteristics. Is this set suitable for tight or restricted workspaces? Yes. The Gr.1 format is compact and intended for use where space is limited or when fine stacking is required to reach exact clamping heights. Can the No. 6500E be used across different clamping systems? The No. 6500E Gr.1 is described as universally applicable and is compatible with a range of standard clamping arrangements; verification against specific fixture interfaces is recommended. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com