Caliper with Touchscreen

Take advantage of a rugged, fully integrated data-collection solution that combines reliable wireless connectivity and broad export options with an all-day battery for uninterrupted shop-floor use. Order directly via Metav Werkzeuge or ask our consultants for configuration and accessories advice. MDS DataMet display unit IP67 — Portable Windows data-collector with touchscreen and sealed housing MDS DataMet display unit IP67 provides a mobile, industry-ready display and data logger for integration with precision measuring instruments, designed for use in production, inspection and laboratory environments. Windows 10 tablet with MDS PRO app IP67 protection for harsh workshop use 10" touchscreen, 1280×800 resolution Export to CSV, XLS and PDF formats Seamless data capture and integration that speeds up inspection cycles The MDS DataMet display unit IP67 acts as a ready-to-run data collection hub, pairing a Windows 10 platform with the MDS PRO app to gather measurements without an intermediate PC. Autoconnection and reading synchronizing reduce manual intervention, while support for multiple wireless links and USB dongles ensures simultaneous communication with many Microtech measuring instruments. The ability to resend to external apps and to export in CSV, XLS and PDF formats enables direct import into Excel, SAP or CAD systems, shortening the time from measurement to documentation and improving process throughput. Rugged portability that keeps quality control on the production floor Built for demanding surroundings, the display unit carries an IP67 rating that protects electronics from dust and temporary immersion, maintaining uptime in wet or dusty environments. The compact 10" touchscreen (1280×800) and a weight of approximately 1.15 kg make the device straightforward to carry between workstations; the internal 8000mAh rechargeable Li‑Pol battery supports extended shifts away from mains power. Physical interfaces such as RS‑232, RJ‑45 and HDMI, plus dual USB ports, ensure compatibility with legacy test rigs and modern networked systems — all packaged in a sealed housing that reduces the risk of environmental-induced failures. Versatile controls and visualisation options for clearer decisions The unit supports practical process-control functions such as Go/NoGo, mm/inch conversion, timer and resolution selection, which help to standardise measurement routines and reduce operator variation. Graphical capabilities — including a Graphical mode and 2D-Graphical mode with PNG export — make trend visualisation and quick pass/fail analysis immediate on the device, aiding rapid decision-making on the shop floor. Optional peripherals such as DataMet buttons, wired or wireless footswitches, and a user manager for role separation extend workflow flexibility and support traceable inspection records. Contact Metav Werkzeuge to configure the Microtech Metrology MDS DataMet display unit IP67 with the options your process requires and to arrange delivery from our Emmerich warehouse, where expert advice and reliable logistics keep production accurate and on schedule. Technical data Article number: 299999003 Touchscreen display: 10" (1280×800) Protection: IP67 Platform: Windows 10 / MDS 5.5 PRO Rechargeable built-in Li‑Pol battery: 8000mAh Dimensions: 280×184×26 mm Weight: 1.15 kg Facts USB‑dongles: 1 (max 2) Wireless: 8 (max 16) Wireless HID: 8 USB HID: 2 USB ports: 2 + 1 WI‑FI: Yes RS‑232: 1 Special features Autoconnection Reading synchronizing User manager Foot‑switch connection (option) Graphical mode; 2D graphical mode; save graph PNG Save data to CSV, XLS, PDF Multilanguage: 10 languages Go/NoGo functions; mm/inch conversion HDMI and RJ‑45 interfaces FAQ What connectivity does the display unit support? The MDS DataMet display unit supports Wi‑Fi, multiple wireless links, USB dongles, RS‑232 and RJ‑45 for flexible connection to instruments and networks. Can measurement files be exported to common office software? Yes — the device exports directly to CSV, XLS and PDF formats, allowing data from the MDS DataMet display unit to be imported into Excel, SAP or CAD systems. Is the unit suitable for harsh workshop environments? With an IP67 rating and a sealed housing, the display unit is designed to tolerate dust and temporary immersion, making it suitable for many workshop and production areas. Are there accessories for hands-free data capture? Optional wired and wireless footswitches and DataMet buttons are available to record measurements and set zero without touching the touchscreen. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of reliable data capture, seamless connectivity and wide export options to streamline quality control and traceability. Benefit from a compact, Windows-based display with touchscreen operation and integrated MDS PRO functionality — order directly via Metav Werkzeuge or consult our specialists for tailored configuration. MDS DataMet Desktop display unit DESKTOP — 11.6-inch touchscreen, Windows 10 data collector (Microtech Metrology) MDS DataMet Desktop display unit DESKTOP provides a ready-to-run, industrial data-collection interface for measurement instruments, ideal for lab benches and inspection stations. 11.6-inch Full HD touchscreen display Windows 10 platform with MDS PRO app Multi-protocol connectivity: USB, RS‑232, RJ‑45 Export to CSV, XLS and PDF plus graphical PNG Faster, more reliable data capture for inspection workflows The MDS DataMet display unit DESKTOP is designed as a dedicated data acquisition terminal for measurement instruments, offering immediate productivity gains through Autoconnection and Reading synchronizing. The device runs on Windows 10 with the MDS PRO app preinstalled, enabling automatic pairing with instruments and consistent capture of values, including zeroing and timestamping. This reduces manual transcription, shortens inspection cycles and improves reproducibility in routine quality checks. Flexible connectivity and open data exchange to fit existing IT A broad set of interfaces ensures smooth integration into existing production IT: USB ports and HID support, RJ‑45 Ethernet, multiple RS‑232 and RS‑485 channels, plus Wi‑Fi for wireless devices. Data may be exported in common formats (CSV, XLS, PDF) and saved as graphical PNG files from the built-in Graphical mode, allowing direct import into Excel, SAP or CAD/packages such as SolidWorks. Format settings (decimal separator, symbols) are adjustable to local standards, simplifying data transfer and traceability. Ergonomic desktop design and optional hands-free operation The unit is compact and lightweight, built for bench use where space is limited; it supports footswitches and optional wireless buttons for hands-free capture, while the onboard User manager, Go/NoGo outputs and mm/inch conversion aid fast decision-making on the shop floor. Multilanguage support and selectable display resolution make adoption straightforward across multilingual teams. These practical features speed up measurement routines and lower the risk of operator-induced variation. For precise, network-capable data collection with Microtech Metrology hardware, contact Metav Werkzeuge in Emmerich for technical advice or to order directly from our stock. Technical data Article number: 299999001 Manufacturer: Microtech Metrology Label: MDS DataMet display unit DESKTOP Platform: Windows 10 / MDS 5.5 PRO Facts Touchscreen: 11.6" (1920 x 1080) Dimensions, mm: 283 x 177 x 73 Weight: 1.25 kg USB port: 4 RJ‑45: Yes RS‑232: 3 RS‑485: 1 USB‑HID: 4 (max 64) Wireless: 8 (max 32) USB‑dongles: 1 (optional 8) Special features Data export: CSV, XLS, PDF Graphical mode and 2D graphical mode, save graph as PNG On-line export to external programmes (Excel, SAP, SolidWorks) Autoconnection and reading synchronizing MDS PRO app and USB dongle PRO included Foot‑switch connection and optional wireless footswitch User manager, Go/NoGo functions, timer and resolution selection mm/inch conversion, multilanguage (10 languages) Cardreader and HDMI output *.xls, *.csv, *.doc file editor and app installation support FAQ What instruments can connect to the display unit? The display unit interfaces with Microtech Metrology instruments and other devices supporting standard protocols; connections available include USB, RS‑232, RS‑485 and wireless HID for seamless data capture. Which file formats are available for export? Export formats supported are CSV, XLS and PDF; graphical outputs can be saved as PNG for reports and visual analysis from the unit. Can the unit transfer data directly into ERP or CAD systems? Yes. The unit supports online export to external programmes such as Excel, SAP and SolidWorks with adjustable data formatting for direct import. Is hands-free data capture possible? Hands-free capture is supported via the footswitch connection; optional wired or wireless footswitches and data‑collect buttons are available for integration. Does the display support multiple users and languages? The unit includes a User manager and offers multilanguage support (10 languages), making it suitable for shared workstations in international environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Benefit from the combination of a Swiss reading system with 0.0005 mm resolution and integrated E‑Force control (1–20 N) for reproducible measurements; order the DataMet eFORCE directly via Metav Werkzeuge or consult our specialists for application advice. DataMet eFORCE 1‑20N Precision Caliper — Swiss reading system, Wireless, USB & Modbus (Microtech Metrology) The DataMet eFORCE 1‑20N Precision Caliper is a workshop‑grade instrument combining micrometre‑class resolution with configurable force control and industrial data outputs for metrology tasks in production and quality assurance. Swiss 0.5 µm resolution selectable E‑Force 1–20 N controlled measuring force Wireless, USB and Modbus RTU outputs Calibration certificate included Consistent micrometre accuracy for routine quality control The caliper uses a Swiss reading system that delivers a selectable resolution down to 0.0005 mm (0.5 µm). This level of detail reduces measurement uncertainty on fine features and supports repeatable results across multiple operators. The built‑in E‑Force module controls contact pressure between 1–20 N, significantly lowering variability caused by differing hand pressure and ensuring measurements remain within the stated ±0.005 mm accuracy. For everyday shop measurement this translates into fewer reworks and a more reliable inspection record. Practical range and handling for workshop and lab use Classified as a Standard caliper (measuring range up to 150 mm), the instrument balances reach and stiffness for general metalworking, toolmaking and inspection. The compact jaw geometry (jaw lengths 40/16 mm) keeps the device rigid while allowing interior, exterior and step measurements with straightforward handling. The memory manager stores up to 2000 values in folders with statistical summaries, which streamlines batch checks and shortens the time between measurement and decision. Industry 4.0 connectivity and simple data integration Designed for digital workflows, the caliper supports four modes of data transfer: wireless connection to the MDS app (Windows, Android, iOS, macOS), wireless HID, USB HID and Modbus RTU for direct industrial integration via RS‑485 (4‑wire). Optional protocols such as Modbus ASCII or Modbus TCP/IP are available on request for PLC integration. These interfaces allow measured values to flow automatically into SPC systems, reducing transcription errors and accelerating production feedback loops. Robust toolkit delivery and measurement workflow features Delivered as a set with the measuring instrument, USB data/charging cable and a calibration protocol, the package is ready for immediate use. Functions such as Go/NoGo, Max/Min, formula mode, linear and temperature correction, and a 2.0” colour touchscreen make configuration and inspection straightforward; the Auto‑Force and force indication features help operators meet repeatable measuring conditions. The combination of onboard statistics and external data export supports traceable records without complex setups. For a technical demonstration of how the DataMet eFORCE integrates into production metrology, contact Metav Werkzeuge in Emmerich for consultancy or request a tailored specification from Metav Werkzeuge. Technical Data Article number: 141088015M Manufacturer: Microtech Metrology Measuring range: 0–150 mm Resolution: 0.0005 mm selectable Accuracy: ±0.005 mm Force range: 1–20 N Jaw length: 40/16 mm Delivery contents: Measuring tool, MDS app (free), USB cable, calibration protocol, ModBus RTU Facts Resolution options: 0.0005 / 0.001 / 0.01 / 0.1 mm Memory capacity: 2000 values Display: 2.0” colour touchscreen Interfaces: Wireless, USB HID, Modbus RTU (RS‑485) Measuring range category: Standard (up to 150 mm) Special features Swiss reading system for high resolution E‑Force control module with force selection and AUTO‑Force Functions: Go/NoGo, Max/Min, Formula, Timer, linear & temperature correction Memory manager with folders and statistics mode Wireless MDS app compatibility (Windows, Android, iOS, macOS) Modbus RTU industrial output; Modbus ASCII/TCP‑IP optional on request Calibration certificate included USB data/charging cable supplied FAQ What measurement resolution does the instrument provide? The caliper offers a selectable resolution down to 0.0005 mm (0.5 µm), delivered by a Swiss reading system that supports fine‑feature inspection. How does the E‑Force module improve repeatability? The E‑Force module regulates contact pressure between 1–20 N, including an Auto‑Force mode and colour force indication, which reduces operator‑dependent variation and increases reproducibility of measurements. Can measured values be exported to a PLC or SPC system? Yes. The device supports Modbus RTU via RS‑485 for industrial connections and also provides wireless and USB HID modes for direct transfer to the MDS app or host systems. Is a calibration certificate supplied with the instrument? A calibration certificate is included in the delivery set and the calibration protocol is supplied with the instrument. What applications suit this caliper best? This standard‑range caliper (0–150 mm) is ideal for machine shops, toolrooms and quality departments requiring high resolution, controlled measuring force and digital data capture. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of laboratory-grade resolution, active force control and seamless data transfer to reduce rework and speed inspection cycles. Benefit from an ISO 17025 calibration certificate and full data logging to support traceability. Order the caliper directly via Metav Werkzeuge or ask their consultants for application advice. DataMet eFORCE 1–20N Precision Caliper — Ceramic jaws, Wireless + USB | Microtech Metrology The DataMet eFORCE 1–20N is a Swiss‑precision laboratory caliper offering force‑controlled measurements and Industry 4.0 connectivity for workshop and metrology applications Industry 4.0 E‑Force with 2.0" touchscreen Swiss reading system with 0.2 µm resolution Ceramic, non‑magnetic wear‑resistant jaws Force control 1–20 N with AUTO‑Force Wireless MDS app, HID and USB HID connectivity Consistent, reproducible high‑precision measurement for quality control The DataMet eFORCE 1–20N combines a Swiss reading system with selectable resolution (0.0002 / 0.001 / 0.01 / 0.1 mm) to deliver laboratory‑grade repeatability. The integrated E‑Force module with Force control and a 1–20 N range removes variability caused by manual pressure; AUTO‑Force provides a quick, reproducible setting for routine inspections. These characteristics reduce measurement scatter and support reliable pass/fail decisions during production and incoming inspection. Fast digital workflows and clear, retraceable data handling A large 2.0” colour touchscreen and a comprehensive memory manager (storage for 2000 values with folder and statistics modes) turn each measurement into immediately usable data. Multiple transfer modes are supported: Wireless transfer to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID, ensuring simple integration with QC stations or networked data collection. The result is fewer transcription errors and faster reporting for QA processes. Durable construction and workshop suitability for everyday use External ceramic tipped jaws are non‑magnetic, non‑conductive and wear‑resistant, keeping contact geometry stable over long inspection runs. The caliper’s measured range places it in the Standard (100–300 mm) class, making it suitable as a universal workshop instrument for machining, toolrooms and assembly checks. Delivery includes the measuring tool, free versions of the MDS app, a USB data/charging cable and a calibration protocol; an ISO 17025 calibration certificate (Ilac MRA) is supplied for traceability. For a demo of how force‑controlled measurement can reduce scrap and speed inspections, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 141088015AK Label: 150mm DataMet eFORCE 1-20N Precision Caliper (Swiss precision system) Delivery set: measuring tool, Free MDS app versions, USB data/charging cable, calibration protocol Core specifications Measuring range: 0–150 mm Resolution options: 0.0002 / 0.001 / 0.01 / 0.1 mm Minimum resolution: 0.0002 mm (0.2 µm) Accuracy: 0.004 mm Force range: 1–20 N Memory capacity: 2000 values Features & materials External ceramic tipped jaws — non‑magnetic, non‑conductive, wear‑resistant E‑Force force control module with AUTO‑Force and force indication Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature correction Data transfer: Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID Swiss reading system with selectable resolution Calibration certificate ISO 17025 (Ilac MRA) included FAQ What resolution and accuracy can be expected from this caliper? The DataMet eFORCE 1–20N features a Swiss reading system with selectable resolution down to 0.0002 mm (0.2 µm) and a stated accuracy of 0.004 mm, ideal for demanding workshop and laboratory checks. Is the instrument supplied calibrated and traceable? Yes — the caliper is supplied with a calibration protocol and an ISO 17025 calibration certificate (Ilac MRA), ensuring documented traceability for quality systems. How does the E‑Force module improve measurement reproducibility? E‑Force provides controlled contact pressure between 1–20 N with visual force indication and AUTO‑Force modes; this removes user‑dependent variability and makes results consistent from one operator to the next. Which data transfer options are available for integrating into inspection workflows? DataMet eFORCE supports Wireless transfer to the MDS app (Windows, Android, iOS, macOS), Wireless HID, Wireless HID+MAC and USB HID, enabling direct data capture into QC software or spreadsheets. For which applications is this caliper most suitable? The 0–150 mm measuring range places it in the Standard caliper category, making it suitable for general workshop metrology, machining checks, toolroom use and incoming inspection where high resolution and force control add measurable value. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of high‑resolution measurement, controlled measuring force and seamless data transfer for reproducible results and efficient quality control; order directly via Metav Werkzeuge or consult our specialists for integration advice. DataMet eFORCE 0–150 mm Precision Caliper — E‑Force 1–20 N, 0.5 µm resolution, Wireless & USB (Microtech Metrology) The DataMet eFORCE is a Swiss‑engineered precision caliper designed for Industry 4.0 metrology, combining ultra‑fine resolution with electronic force control for workshop and laboratory measurement tasks 0.5 µm high‑resolution reading system E‑Force force control 1–20 N Wireless and USB HID data transfer High‑resolution readings for decisive measurement results The caliper delivers a 0.5 µm resolution (selectable to 0.001 / 0.01 / 0.1 mm) from a Swiss reading system, allowing fine discrimination of dimensional changes that standard instruments miss. With a certified performance of ±0.005 mm accuracy on external jaws and conformity for internal and depth measurements to ISO 13385‑1, the instrument closes the gap between workshop gauges and metrology lab equipment. The included ISO 17025 calibration certificate (Ilac MRA) demonstrates traceability and removes uncertainty for incoming inspection and acceptance protocols. Consistent measurement through controlled contact force Measurement variability caused by human pressure is reduced by the integrated E‑Force force control module. Force can be selected from 1–20 N, with AUTO‑Force and colour indication to confirm correct application; this yields reproducible results on delicate parts and hard‑to‑handle components. A regulated measuring force is particularly valuable for thin‑walled parts and small series production, where repeatability is as important as single‑value accuracy. Seamless data capture and Industry 4.0 readiness A built‑in memory manager stores up to 2,000 values with folder organisation and basic statistics, while wireless transfer to the MDS app (Windows, Android, iOS, macOS) or Wireless/USB HID (keyboard emulation, including macOS variants) enables direct input to inspection software, spreadsheets or ERP systems. The USB‑C port provides both data and charging via a rechargeable Li‑Pol cell (500 mAh), reducing downtime and eliminating frequent battery swaps. Robust construction for everyday industrial use Manufactured in stainless steel with hand‑finished measuring surfaces (Ra < 0.32 µm), the instrument is built for recurring shop‑floor handling and precise contact geometry. The jaw configuration (40/16 mm) supports a wide range of part sizes while maintaining rigidity. Classified as a Standard measuring range device (max. range 150 mm), it offers the optimal compromise between reach, stiffness and single‑hand operation for general engineering, toolroom and quality control applications. Contact Metav Werkzeuge for tailored advice on integrating the DataMet eFORCE into inspection routines and to secure supply from Emmerich. Technical data Article number: 141088015A SKU: 141088015A Brand: Microtech Metrology Label: MICRON DataMet E‑Force Caliper Delivery contents: Messwerkzeug; Free versions of MDS App; USB data/charging cable; Calibration protocol Facts Measuring range: 0–150 mm Resolution: 0.0005 mm (0.5 µm) selectable Accuracy: ±0.005 mm (on external jaws) Measuring force: 1–20 N (E‑Force) Memory: 2,000 values Battery: Li‑Pol 500 mAh, USB‑C charging Jaw lengths: 40/16 mm Special features Swiss reading system, hi‑res 2.0" colour touchscreen Functions: Analog scale, Preset, Graphic, Go/NoGo, Max/Min, Formula, Timer, Linear and temperature correction E‑Force control module with AUTO‑Force and colour force indication Wireless data transfer to MDS app; Wireless HID and USB HID (macOS compatible) Stainless steel construction; measuring surfaces Ra < 0.32 µm Calibration certificate included (ISO 17025, Ilac MRA) Conformity for internal and depth measurements to ISO 13385‑1 FAQ What makes this caliper suitable for both workshop and lab environments? The DataMet eFORCE combines a 0.5 µm resolution Swiss reading system with a robust stainless steel build and ISO 17025 calibration, giving laboratory‑grade traceability while remaining durable enough for routine workshop use. How does the E‑Force module improve measurement reliability? E‑Force provides selectable 1–20 N force control and AUTO‑Force operation; the module prevents variations from manual pressure, ensuring reproducible readings with the DataMet eFORCE caliper. Can measurement data be transferred directly into inspection software? Yes. The caliper supports Wireless transfer to the MDS app and Wireless/USB HID keyboard emulation for direct entry into spreadsheets, inspection software or ERP systems. Is a calibration certificate supplied with the instrument? A calibration protocol is included; the DataMet eFORCE is delivered with an ISO 17025 calibration certificate (Ilac MRA) for documented traceability. What measurement functions are available on the device? The instrument offers analog scale display, preset, graphic view, Go/NoGo checks, max/min, formulas, timer and linear and temperature correction modes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

The provided product data contains contradictory specifications that prevent creation of a reliable product description. The item is described alternately as a mobile, IP67-rated button and as a desktop two‑button panel with an IP40 protection rating; these descriptions are mutually exclusive. Because of this inconsistency it is not possible to produce a compliant, accurate product text, as core functional and environmental details remain unclear. Please clarify which variant is intended (mobile or desktop), and confirm the correct ingress protection rating, battery specification, and principal connectivity features. Additionally, verify the device dimensions, weight and whether data output or synchronisation to the MICROTECH MDS app and instrument memory are required as primary functions. Once these key specifications are resolved and supplied consistently, a full British‑English product description meeting all structural and editorial requirements can be generated promptly.

Take advantage of the combination of controlled measuring force, submicron resolution and seamless data transfer for reliable quality control and reproducible results; order the caliper directly via Metav Werkzeuge or ask our consultants if needed. DataMet eFORCE 1-20N Wireless Caliper, 200 mm – Swiss precision (Microtech Metrology) The DataMet eFORCE 1-20N is a 200 mm laboratory precision caliper with ceramic‑tipped jaws and an Industry 4.0 E‑Force system for controlled measuring force and digital data integration E‑Force force control 1–20 N Swiss reading system 0.0002 mm resolution ISO 17025 calibration certificate included Wireless, USB and MODBUS data transfer Consistent contact pressure for repeatable measurements The integrated E‑Force module provides selectable force from 1–20 N with visual force indication and an AUTO‑Force mode. By controlling measuring pressure the device reduces user‑dependent variance and improves repeatability in serial inspection and component verification. This force regulation is particularly valuable when comparing soft and hard components or when small contact differences would otherwise skew the result, turning manual handling into a reproducible procedure. Lab-grade resolution and data handling for traceable quality control Equipped with a Swiss reading system and a selectable 0.0002 mm resolution, the instrument delivers exceptionally fine measurement steps while remaining usable for routine shop‑floor checks. The caliper stores up to 2,000 values with a folder system and statistics mode, enabling batch evaluation without immediate PC connection. With an accuracy specification of 0.006 and resolution options for coarser tasks, the device balances extreme precision with practical flexibility for inspection tasks across production and assembly. Modern connectivity and hard‑wearing contact geometry for industrial workflows Data export is supported via wireless pairing to the MDS app, wireless HID modes and USB HID, plus MODBUS compatibility for integration into automation systems. External ceramic‑tipped jaws are non‑magnetic, non‑conductive and wear‑resistant, reducing probe noise and extending service life in abrasive environments. A calibration protocol is supplied with the caliper and the delivery set includes the measuring tool, free versions of the MDS app and a USB data/charging cable to simplify setup and documentation. For precision measurement needs where force control and high resolution matter, contact Metav Werkzeuge to arrange supply and technical advice on Microtech Metrology’s DataMet eFORCE caliper. Technical Data Article number: 141088020AK Brand: Microtech Metrology Delivery set: Messwerkzeug; Free versions of MDS App; USB Data/Charging Cable; Calibration Protocoll Facts Measuring range: 0–200 mm Resolution selectable: 0.0002 / 0.001 / 0.01 / 0.1 mm Accuracy: 0.006 Measuring force: 1–20 N Memory capacity: 2,000 values Special features Industry 4.0 E‑Force caliper with computerized MICS 2.0” colour touchscreen Swiss made reading system External ceramic‑tipped jaws, non‑magnetic, non‑conductive, wear‑resistant Functions: Go/NoGo; Max/Min; Formula; Timer; Linear correction; Temperature correction; Resolution select; Connection indication Memory manager with folders and statistics mode Data transfer modes: Wireless to MDS app; Wireless HID; Wireless HID+MAC; USB HID; MODBUS compatible Calibration certificate included (ISO 17025, Ilac MRA) FAQ Is the measuring force adjustable and documented? Yes. The measuring force is adjustable between 1 and 20 N via the E‑Force module, with force indication and AUTO‑Force modes documented in the measurement logs of the DataMet eFORCE caliper. What resolution and accuracy can be expected for fine inspections? The instrument offers a selectable resolution down to 0.0002 mm and an accuracy value of 0.006, making it suitable for high‑precision laboratory checks and demanding workshop controls. How is measurement data exported to inspection software or a PLC? DataMet eFORCE supports wireless transfer to the MDS app (Windows, Android, iOS, macOS), wireless HID modes, USB HID and MODBUS, enabling direct integration with inspection software and PLC systems. Does the delivery include calibration documentation? A calibration protocol is supplied with the caliper; the delivery set lists the measuring tool, free MDS app versions and a USB data/charging cable, and the package notes an ISO 17025 calibration certificate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Benefit from industrial-grade connectivity, force-controlled repeatability and sub-micron reading precision for reliable quality control; order directly via Metav Werkzeuge or consult our advisors for specification matching. DataMet eFORCE 1–20N Caliper 0–200 mm — Wireless, USB & MODBUS (Microtech Metrology) the DataMet eFORCE 1–20N Caliper is a precision digital caliper for workshop and production use, combining force-controlled measurement, a Swiss reading system and multiple industry-ready data interfaces 0.5 µm Swiss reading system resolution E‑Force force control 1–20 N with AUTO mode Wireless, USB HID and MODBUS RTU connectivity ISO 17025 calibration certificate included Sub-micron certainty for quality control The core strength of this caliper is its 0.5 µm resolution, achieved by a Swiss-made reading system that permits selectable display steps (0.0005 / 0.001 / 0.01 / 0.1 mm). This level of resolution reduces uncertainty when inspecting small features and supports tighter tolerance regimes in component inspection. The specified general accuracy of 0.008 mm provides a reliable performance benchmark for routine dimensional checks, and the selectable resolutions help to balance visibility and statistical handling when compiling measurement data for process control. Stable contact force for repeatable results An integrated E‑Force control module with selectable 1–20 N force settings addresses the most common human factor in caliper measurement: variable closing pressure. AUTO‑Force and a clear colour indication guide operators to the correct contact regime, which reduces scatter between measurements and improves reproducibility during batch inspections. For applications where consistent contact is critical — such as precision assemblies or comparative gauging — force control converts operator variability into a measurable, adjustable parameter. Direct data flow into production systems Designed for Industry 4.0 workflows, the instrument offers multiple transfer modes: Wireless connection to the MDS app (Windows, Android, iOS, MacOS), USB HID, wireless HID variants and a factory-ready MODBUS RTU (RS‑485) output for PLC integration. Memory management stores up to 2000 values in a folder structure with basic statistics, enabling offline logging and bulk transfer. Optional MODBUS ASCII and MODBUS TCP/IP are available on request for tighter network integration. These features streamline data capture and reduce manual transcription errors in quality documentation. Workshop-ready specification and calibrated delivery With a measuring range of 0–200 mm, the instrument falls into the Standard category for machine‑shop use — the practical balance of reach, stiffness and single‑hand operation required for everyday metrology tasks. The package includes a 2.0" colour touchscreen for straightforward operation, USB data/charging cable, free versions of the MDS app and a calibration protocol; delivery is completed with an ISO 17025 (Ilac MRA) calibration certificate. This documented calibration ensures traceability for internal quality systems and external audits without additional preparation. Contact Metav Werkzeuge for a technical consultation and to arrange delivery of a calibrated DataMet eFORCE from Emmerich — tailored advice for integration and spare parts is available from the specialists at Metav Werkzeuge Technical Data Article number: 141088020M UID: 141088020M Brand: Microtech Metrology Model: DataMet eFORCE 1–20N Measuring range: 0–200 mm Resolution: 0.0005 mm (0.5 µm) Accuracy: 0.008 mm Facts Force range: 1–20 N Memory capacity: 2000 values Display: 2.0" colour touchscreen Resolution options: 0.0005 / 0.001 / 0.01 / 0.1 mm Data transfer modes: Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID Special features Industry 4.0 adopted E‑Force caliper with computerised MDS system SWISS made reading system with selectable resolutions Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction Memory manager with folders and statistics mode E‑Force control module with Force selection and AUTO‑Force mode 4 modes of data transfer; MODBUS RTU (RS‑485) for industrial connections MODBUS ASCII and MODBUS TCP/IP available on request Calibration certificate included (ISO 17025, Ilac MRA) Delivery set: measuring tool, MDS app free versions, USB cable, calibration protocol, ModBus RTU FAQ What level of resolution and accuracy does the instrument offer? The caliper provides a 0.5 µm (0.0005 mm) reading capability with selectable display steps and a stated accuracy of 0.008 mm, suitable for demanding workshop and inspection tasks. Is the caliper delivered calibrated for traceability? Yes — the instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), and a calibration protocol is included in the delivery set for audit and quality‑system needs. Which interfaces support automated data collection? DataMet eFORCE supports wireless transfer to the MDS app, USB HID, wireless HID variants and MODBUS RTU (RS‑485); MODBUS ASCII and MODBUS TCP/IP can be provided on request for PLC and factory network integration. How does the E‑Force system improve measurement repeatability? The E‑Force module enables selectable contact forces between 1 and 20 N and an AUTO mode, which reduces operator‑dependent variation by enforcing consistent closing pressure and signalling correct measurement force during acquisition. Is the 0–200 mm range suitable for general workshop use? Yes — a 0–200 mm measuring range places the caliper in the Standard category, offering a practical compromise of reach and stiffness for everyday metalworking, fixture inspection and component checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of submicron resolution, programmable E‑Force contact control and seamless data transfer to speed up inspection routines and reduce rework. Benefit from a fully traceable delivery including an ISO 17025 calibration certificate and order the DataMet eFORCE digital caliper directly via Metav Werkzeuge or ask our consultants if needed. DataMet eFORCE Digital Caliper — 0.0005 mm resolution, E‑Force 1–20 N, Wireless & USB (Microtech Metrology) The DataMet eFORCE is a precision digital caliper designed for workshop and laboratory use, combining submicron readout with programmable contact force and flexible data connectivity for quality control and Industry 4.0 workflows. 0.0005 mm (0.5 µm) resolution E‑Force 1–20 N force control with AUTO‑Force Wireless and USB HID transfer, MDS app compatible Measure with confidence: submicron accuracy and controlled probe force The caliper delivers a selectable 0.0005 mm readout option, supported by a Swiss-made reading system that provides true submicron resolution for fine measurement tasks. Integrated E‑Force control lets operators select a defined contact force between 1–20 N, with AUTO‑Force and force indication to eliminate variability caused by hand pressure. Together these features reduce measurement uncertainty and make the instrument suitable for demanding inspection work where repeatability matters. Streamlined data handling to speed inspection and reporting On-board memory and connectivity simplify data capture: a 2000 values memory manager with folders and statistics mode stores readings for later review, while wireless transfer to the MDS app and USB HID emulate keyboard input for direct entry into common software. The caliper supports multiple resolution settings and linear/temperature correction, enabling a plug-and-play transfer of validated measurement data into digital workflows and statistical process control. Built for daily use: robust surfaces and ergonomic handling Constructed from stainless steel with hand-finished measuring faces (surface roughness Ra <0.32 µm), the instrument balances durability with smooth operation. Jaw geometry and feel suit both external and internal work; the rechargeable Li‑Pol cell with USB‑C charging supports extended on‑bench use while minimising downtime. The combination of tactile design and rugged materials ensures reliable performance in production and inspection environments. Delivered calibrated and traceable for quality management This caliper is supplied complete with a calibration protocol issued under ISO 17025 (ILAC‑MRA), providing documented traceability for internal quality systems. Compliance references for jaws and depth measurements follow recognised standards, so the instrument integrates readily into calibration schedules and audit procedures, removing uncertainty about measurement validity from the outset. Contact Metav Werkzeuge for specification matching and logistics for the Microtech Metrology DataMet eFORCE—our Emmerich team will advise on configuration and delivery to your workshop. Technical Data SKU: 141088020A Label: MICRON DataMet E‑Force Caliper 200mm Manufacturer: Microtech Metrology Delivery set: Measuring tool; Free versions of MDS App; USB data/charging cable; Calibration protocol Facts Resolution: 0.0005 mm (0.5 µm) selectable (also 0.001 / 0.01 / 0.1 mm) Measuring range: 0–200 mm Accuracy: 0.008 mm Force range: 1–20 N Battery: 500 mAh Li‑Pol Memory: 2000 values Jaw lengths: 50 / 17 mm Surface roughness: Ra <0.32 µm Special features SWISS made reading system E‑Force control module with AUTO‑Force and force indication Wireless data transfer to MDS app; Wireless HID; USB HID USB‑C data/charging socket Functions: Analog scale, Preset, Graphic, Go/No‑Go, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution select, Connection indication Memory manager with folders and statistics; memory data transfer Stainless steel construction with hand‑finished measuring surfaces Calibration certificate included (ISO 17025, ILAC‑MRA) Internal jaws and depth per ISO 13385‑1 FAQ What resolution options are available on this caliper? The DataMet eFORCE digital caliper offers selectable readouts down to 0.0005 mm (0.5 µm), with additional settings at 0.001, 0.01 and 0.1 mm for flexibility in different tasks. How does the E‑Force contact control improve measurement results? E‑Force lets users set a defined contact force between 1–20 N; the module records and indicates force to prevent variation from manual pressure, improving repeatability for series measurements with the DataMet eFORCE. Can measurement data be transferred to standard inspection software? Yes — the instrument supports wireless transfer to the MDS app and USB HID (keyboard emulation), enabling direct data entry into spreadsheets and inspection systems without additional drivers. Is the caliper delivered calibrated and ready for traceable inspection? A calibration protocol issued under ISO 17025 (ILAC‑MRA) is included with the caliper, providing measurement traceability for quality assurance and audit requirements. Which materials and environments is the caliper suited for? The stainless steel construction and hand-finished faces (Ra <0.32 µm) make the tool appropriate for general workshop and laboratory use, where stable surfaces and controlled contact force are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of a reliable 2 m MicroUSB lead that combines uninterrupted charging with HID‑mode data transfer, ensuring instruments remain powered while sending measurements directly to customer apps; order via Metav Werkzeuge or consult our specialists for matching accessories. USB DATA+CHARGING cable for Data Met instruments — 2 m MicroUSB (Microtech Metrology) The USB DATA+CHARGING cable for Data Met instruments is a 2 m MicroUSB lead designed to charge Microtech instruments and transfer measurement data in HID mode directly to a receiving application for seamless integration. 2 m cable length for flexible reach MicroUSB connector for Data Met instruments Charging plus HID data transfer functionality Supplied ready for use Continuous power and dependable data flow for metrology tools The cable provides simultaneous charging and data transfer, combining two essential functions in one connection so instruments remain operational during data capture. The use of HID mode (keyboard emulation) permits straightforward data entry into most apps and spreadsheets without additional drivers, speeding up data handling in quality control processes. With its 2 m reach, the lead supports bench and machine‑side setups, reducing the need to reposition instruments and enabling a steadier workflow. Faster routines through simple integration and plug‑and‑play operation Integration with Data Met instruments is kept intentionally simple: the lead acts as both power supply and a direct data channel, reducing cycle times and administrative overhead. The plug‑and‑play characteristic of the HID interface ensures immediate recognition by host systems, which lowers setup time and minimises interruptions on the production line. This practicality translates into measurable efficiency gains for inspection routines and documentation tasks. Practical supply and suitability for metrology environments Delivered as a single ready‑to‑use cable, the product functions as a reliable spare or replacement lead for instrument fleets. Compatibility with MicroUSB‑equipped Data Met devices makes it suitable for many workshop and laboratory applications, from routine checks to batch documentation. The combination of charging and data transfer removes the need for separate power adaptors or converters, streamlining equipment management and reducing clutter at the workstation. For expert advice on matching this Microtech Metrology cable to existing equipment or to source additional Data Met accessories, contact Metav Werkzeuge for prompt support and delivery from Emmerich. Technical Data Article number: 141077012 UID: 141077012 Label: USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB Core data Length: 2 m Connector: MicroUSB Function: Charging and HID data transfer Special features Compatible with Data Met MICROTECH instruments Supplied contents: Cable USB data cable for Data Met instruments (charging + transfer) FAQ What devices is this cable compatible with? The cable is compatible with Microtech Metrology Data Met instruments that use a MicroUSB connection; it supports both charging and HID‑mode data transfer for those devices. Can the cable transfer measurement data directly into an application? Yes — the cable transmits data in HID mode, allowing measurements from the instrument to be entered directly into many apps and spreadsheet programmes without driver installation. Is the length sufficient for bench and machine use? The 2 m length provides flexible reach for bench‑top and machine‑side operations, reducing the need to move instruments during measurement and documentation. Does the delivery include any additional accessories? The item is supplied ready for use as a single cable; no additional accessories are included in the delivery. What is the article number for ordering and reference? The article number / SKU for this Microtech Metrology data and charging cable is 141077012. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of a single-cable solution that combines charging and HID-mode data transfer, together with a practical 2 m reach for comfortable instrument handling. Benefit from straightforward compatibility with Microtech Data Met measurement devices and request further advice or stock information via Metav Werkzeuge. USB DATA+CHARGING cable for Data Met instruments 2m USB-C by Microtech Metrology The USB DATA+CHARGING cable for Data Met instruments 2m USB-C is a charging and data-transfer lead designed for Microtech Data Met measuring instruments, offering a reliable connection for measurement workflows and mobile app integration 2 m cable length for flexible use USB-C connector for modern instrument interfaces Charging and data transfer in HID mode Compatible with Microtech Data Met instruments Reduce handling time with combined charging and data transfer The cable merges charging and data transfer functions into one lead, cutting the number of cables required at the bench and simplifying daily routines. Thanks to the HID mode (keyboard emulation), measurement values can be sent directly into many data collection apps without special drivers, which reduces setup time and avoids driver‑related interruptions. The 2 m length provides freedom of movement around workpieces while keeping the connection secure and visible. Seamless app integration for measurement workflows Designed for use with Microtech Data Met instruments, this USB‑C lead supports direct keyboard-style input into spreadsheets and bespoke inspection software, enabling quick logging and traceable records. The USB-C interface ensures a consistent electrical and data path for contemporary metrology devices, helping to maintain data integrity during transfer and supporting efficient digital workflows in the workshop or on the shop floor. Practical form factor for everyday metrology tasks A single-purpose cable that pairs a standard connector with a workflow-focused function brings pragmatic benefits: fewer connection errors, simpler inventory, and faster transfer of readings into quality-control processes. The cable’s length and interface reduce the need to reposition instruments, which helps maintain repeatability in routine checks. Clear labelling and direct compatibility also aid procurement and stocking decisions for supply managers. Contact Metav Werkzeuge for stock availability, compatibility checks and further details on the Microtech USB DATA+CHARGING cable—quick supply from Emmerich and expert advice for integration into existing measurement setups Technical data Article number: 141077022 Product name: USB DATA+CHARGING cable for Data Met instruments 2m USB-C Brand: Microtech Metrology Function: Charging and data transfer in HID mode Contents: Cable Facts Length: 2 m SKU: 141077022 Special features Connector: USB-C HID keyboard mode for direct app input Dual function: charging and data transfer Compatible with Microtech Data Met instruments FAQ What does HID mode mean for data transfer? HID mode emulates a keyboard so measurement values from the USB DATA+CHARGING cable for Data Met instruments are entered directly into compatible apps and spreadsheets without the need for additional drivers. Is this cable suitable for all Microtech instruments? The cable is intended for Microtech Data Met instruments with a USB‑C interface; check specific instrument ports and software requirements before purchase. Can the cable charge the instrument while sending data? Yes, the USB DATA+CHARGING cable for Data Met instruments supports simultaneous charging and data transfer in HID mode. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of a ready-to-run data-collection solution that combines reliable Windows software with a compact hardware interface and seamless instrument synchronisation; the set supports zero setting and autoconnection for efficient workshop workflows. Order the accessory set directly via Metav Werkzeuge or contact our consultants for tailored integration advice. MDS Standard accessory set — Windows data-collection kit for Microtech metrology The MDS Standard accessory set is a compact data-collection kit designed to integrate Microtech metrology instruments into Windows-based measurement routines across workshop and quality-control environments. Ready-to-run MDS data collection set Includes Windows MDS 5.5 application Single USB dongle for secure connection Connects up to three Microtech instruments Faster, more reliable measurement logging for everyday workshop use The accessory set brings a ready-to-run approach to data capture: the included MDS 5.5 application for Windows and the USB interface reduce setup time and lower the administrative burden of manual entry. Autoconnection and synchronisation of data reading reduce transcription errors and improve traceability for production and inspection tasks. For routine quality-control cycles, this means fewer interruptions and a more consistent data stream from handheld and bench metrology devices. Stable connectivity and simple expansion for mixed workloads Equipped with a single USB dongle and designed for multiple connection modes, the kit allows the simultaneous integration of up to three instruments, supporting parallel measurement of components or multiple operators at workstations. The autoconnection feature ensures instruments are recognised automatically after sleep or reconnection, while the optional footswitch and DataMet buttons enable hands-free data capture and straightforward zero setting, which speeds up repetitive measurement sequences and reduces operator fatigue. Clear, verifiable data flow that simplifies reporting and traceability The system focuses on delivering a clean data path from instrument to PC: readings are synchronised and recorded directly via the Windows app, enabling immediate export or incorporation into existing inspection workflows. For workshops aiming to tighten process control, this accessory kit supports consistent data logging without complex network configuration. The compact kit is especially useful where fast deployment and minimal training time are priorities, as installation and initial pairing are engineered for immediate operation. Contact Metav Werkzeuge for assistance with system selection and integration of the MDS Standard accessory set — Metav Werkzeuge provides fast delivery from Emmerich and expert advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 299110504 GTIN: 4061905452109 Manufacturer: Microtech Metrology Label: Standard MDS data set for Windows Core data Software: MDS 5.5 (Windows) USB dongle: 1 Maximum connections: 3 Special features Ready data collecting solution from box Data reading synchronisation and connection modes Autoconnection for Microtech instruments Zero setting via software and optional footswitch Optional DataMet buttons and footswitch for hands-free capture FAQ What instruments can be connected with the accessory set? The accessory set supports connection of Microtech metrology instruments and can handle up to three devices simultaneously via the included USB dongle. Is special software required to record measurements? Yes, the set includes the MDS 5.5 application for Windows, which handles data capture, synchronisation and export. Can measurements be taken hands-free? Yes, the kit is compatible with optional DataMet buttons and a footswitch for hands-free data capture and for performing zero setting. How does autoconnection improve daily operation? Autoconnection lets instruments reconnect automatically after disconnection or sleep, ensuring continuous data logging and reducing setup interruptions during production runs. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of high-resolution measurement, controlled contact force and seamless data transfer for reliable shop‑floor quality control. Order the DataMet eFORCE caliper directly via Metav Werkzeuge or ask our consultants if needed. DataMet eFORCE 1‑20N Caliper — 0–300 mm, 0.0005 mm resolution by Microtech Metrology DataMet eFORCE 1‑20N is a precision caliper designed for Industry 4.0-capable dimensional measurement, combining submicron resolution with controlled measuring force for repeatable results across machining and inspection tasks SWISS reading system, 0.5 μm resolution E-Force force control, 1–20 N selection Wireless and USB HID data transfer ISO17025 calibration certificate included Dependable submicron measurement for consistent quality control The DataMet eFORCE 1‑20N uses a Swiss-made reading system delivering 0.5 μm resolution, which translates into reliable detail detection where small deviations matter. With a stated accuracy of ±0.005 mm, the instrument is engineered for repeatable dimensional checks in component inspection and production sampling. The high-resolution display modes (0.0005 / 0.001 / 0.01 / 0.1 mm selectable) and a clear colour touchscreen simplify interpretation of fine measurements, so measurement chains become demonstrably tighter and traceable. Controlled contact force for reproducible results Integrated E-Force technology provides selectable measuring force from 1–20 N, including an AUTO-Force mode and clear colour feedback for the applied pressure. Controlled force reduces variability caused by operator technique and ensures that readings on internal jaws, external jaws and depth gauges are comparable over repeated cycles. For process control this feature reduces rework and improves first-pass yield by turning a manual caliper into a consistently repeatable measuring tool. Seamless data flow into inspection workflows Connectivity is built for modern data capture: wireless transmission to the MDS app (Windows, Android, iOS, macOS) and USB HID modes emulate keyboard input for instant logging into any software. The on-board memory manager stores 2000 values with folder organisation and basic statistics, enabling offline batch capture and later transfer via USB‑C. These options support quick documentation, SPC entry and Industry 4.0 integration without complex interfaces. Robust construction and ready-to-use calibration A robust stainless steel frame with hand-finished measuring faces (Ra < 0.32 μm) stands up to daily workshop use while preserving measuring integrity. The caliper uses a rechargeable Li‑Pol battery (500 mAh) with USB‑C charging and data transfer, and the delivery set includes cable and a calibration protocol. The instrument is supplied with an ISO 17025 calibration certificate, providing accredited traceability for laboratory and production quality records. For Industry 4.0-ready precision and controlled measuring force, contact Metav Werkzeuge in Emmerich for tailored advice and procurement support — Metav Werkzeuge can advise on integration and delivery options Technical Data Article number: 141088030A Brand: Microtech Metrology Measuring range: 0–300 mm Resolution: 0.0005 mm (0.5 μm) Accuracy: ±0.005 mm Facts Memory: 2000 values Force range: 1–20 N Battery capacity: 500 mAh Jaw length: 40/16 mm Measuring surfaces: Ra < 0.32 μm Special features SWISS reading system E-Force force control module Wireless HID and USB HID transfer USB‑C data/charging socket ISO 17025 calibration certificate Delivery set: caliper, free MDS app versions, USB cable, calibration protocol FAQ How accurate is the DataMet eFORCE caliper? The DataMet eFORCE 1‑20N caliper (Microtech Metrology, SKU 141088030A) offers an accuracy of ±0.005 mm with selectable display resolutions down to 0.0005 mm (0.5 μm), suitable for tight production tolerances and laboratory checks. Can the measuring force be adjusted for delicate parts? Yes, the E‑Force control allows selection between 1 and 20 N, plus an AUTO‑Force mode and colour feedback so sensitive or thin-walled components can be measured without distortion. Which data transfer options are available for documentation? Wireless transfer to the MDS app (Windows, Android, iOS, macOS), wireless HID, and USB HID modes are supported; USB‑C provides wired data and charging. On-board memory for 2000 values enables batch capture. Is the instrument delivered calibrated and traceable? The caliper is supplied with a calibration protocol and an ISO 17025 calibration certificate, providing accredited traceability for quality records. For which applications is this caliper best suited? With a 0–300 mm range and submicron resolution, the instrument is ideal for machine building, workshop quality control and precision assembly tasks where reproducibility and digital data capture are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of high-resolution measurement, controlled measuring force and Industry 4.0 connectivity to ensure repeatable results on the shop floor. The built-in E‑Force 1–20 N control and the ISO 17025 calibration certificate provide traceability and reduced rework. Order the caliper directly via Metav Werkzeuge or ask the consultants for integration advice. DataMet eFORCE 1–20N Caliper 0–300 mm — 0.0005 mm resolution, Wireless & MODBUS (Microtech Metrology) DataMet eFORCE 1–20N is an Industry 4.0-ready digital caliper designed for high-precision shop-floor measurement and automated data collection in production environments. Swiss reading system 0.0005 mm resolution E‑Force 1–20 N with force control Wireless, USB and MODBUS data transfer Precise readout and dependable measurement consistency The instrument combines a Swiss reading system with a selectable 0.0005 mm display step, allowing display granularity down to sub-micron levels while preserving a practical selection of 0.001 / 0.01 / 0.1 mm steps for different workflows. This distinction between display resolution and overall measurement uncertainty is essential: fine resolution helps detect small changes, while the specified accuracy (data: 0.008 mm) defines the limit for reproducible results. As a result, the caliper is suited for tasks that demand meticulous control over dimensional tolerances without sacrificing everyday usability in quality control and workshop measurement. Seamless data flow to quality systems and SPC Equipped with the MICS 2.0” colour touchscreen and multiple transfer modes, the device supports modern data handling: Wireless transfer to the MDS app, Wireless HID, USB HID and industrial MODBUS RTU (RS‑485) for machine-level integration. Optional MODBUS ASCII or MODBUS TCP/IP are available on request. These connectivity options enable direct logging to SPC and MES systems, reduce manual transcription errors and streamline batch traceability. The caliper therefore functions as a practical sensor in digital workflows, simplifying reporting and statistical evaluation. Built-in force management to cut operator variability The integrated E‑Force control module lets operators set measuring force between 1–20 N, use an AUTO‑Force mode, and view force indication via the display. Consistent contact pressure removes a common source of measurement scatter, improving repeatability across different users and shifts. The unit also includes a memory manager with capacity for 2,000 values, a folder system and a statistics mode, making it straightforward to record sample sets and retrieve measurement series for immediate analysis without dependence on external logging devices. Workshop-oriented design with certified calibration Classified as a Standard caliper (measuring range up to 300 mm), the instrument balances reach and stiffness for routine machine‑shop and metalworking tasks; the jaw geometry (data: 60/20 mm) supports interior and exterior measures while remaining simple to handle. Delivery includes the measuring tool, free versions of the MDS app, USB data/charging cable, a calibration protocol and ModBus RTU support. A formal ISO 17025 calibration certificate (Ilac MRA) is supplied, giving documented traceability for inspection routines and audit requirements—an advantage for regulated production and contract measurement. Discuss integration options for the Microtech Metrology DataMet eFORCE — contact Metav Werkzeuge in Emmerich for technical consultation and prompt supply coordination. Technical data Article number: 141088030M Manufacturer: Microtech Metrology Delivery set: Messwerkzeug; Free versions of MDS App; USB data/charging cable; Calibration protocol; ModBus RTU Core specifications Measuring range: 0–300 mm Resolution options: 0.0005 / 0.001 / 0.01 / 0.1 mm Accuracy: 0.008 mm Force range: 1–20 N Memory capacity: 2000 values Jaw length: 60/20 mm Features and interfaces Industry 4.0 adopted E‑Force caliper with MICS system and 2.0" colour touchscreen Swiss made reading system resolution 0.0005 micron (selectable) Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution select, Connection indication E‑Force module with force selection, AUTO‑Force mode and force indication Memory manager with folders and statistics mode; memory data transfer Wireless to MDS app (Windows, Android, iOS, macOS) Wireless HID, Wireless HID+MAC, USB HID MODBUS RTU data output (RS‑485, 4‑wire); MODBUS ASCII / MODBUS TCP/IP option on request Calibration certificate included (ISO 17025, Ilac MRA) FAQ What level of resolution and accuracy does this caliper offer? The DataMet eFORCE delivers a display resolution down to 0.0005 mm with selectable steps; the specified measurement accuracy in the data is 0.008 mm, which defines its reproducible tolerance for standard workshop use. Can the caliper be integrated into an existing SPC or MES system? Yes. The DataMet eFORCE supports Wireless transfer to the MDS app, USB HID and MODBUS RTU (RS‑485); MODBUS ASCII and MODBUS TCP/IP are available on request for direct MES or PLC integration. How does the E‑Force module improve measurement repeatability? E‑Force provides controlled measuring pressure from 1–20 N, an AUTO‑Force mode and on‑screen force indication; these functions reduce variability caused by differing operator pressure and yield more consistent results when using the caliper. Is a traceable calibration certificate supplied with the instrument? A calibration protocol is included with the delivery set and the instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), providing traceability suitable for audits and quality management. What types of measurements are supported and is the range suitable for workshop use? The caliper covers 0–300 mm and is classified as a Standard measuring range, making it appropriate for common machine‑shop, metalworking and quality‑control tasks where a balance of reach and stiffness is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Combine ultra-fine resolution, controlled measuring force and wireless data handling to streamline inspection routines; benefit from ISO 17025 calibration and a compact 300 mm range for standard workshop tasks. Order the DataMet eFORCE caliper directly via Metav Werkzeuge or ask our consultants for application advice. DataMet eFORCE 1‑20N — Wireless LAB caliper with ceramic-tipped jaws (Microtech Metrology) The DataMet eFORCE 1‑20N is a laboratory-grade digital caliper with ceramic-tipped jaws, selectable sub-micron resolution and integrated Force-control for repeatable measurements in quality control and Industry 4.0 environments Industry 4.0 E‑Force control, 1–20 N Swiss reading system, 0.2 µm resolution option Wireless and USB HID data transfer Precision where repeatability matters The caliper delivers a selectable resolution down to 0.2 µm, driven by a Swiss-made reading system designed for laboratory use. This level of fineness reduces measurement scatter and supports reliable decision-making in incoming inspection and final quality checks. With its documented accuracy and compact 300 mm measuring range, the instrument suits the universal workshop class Standard (100–300 mm) — offering the best balance of reach, stiffness and one-handed operation for machine‑tool and metalworking tasks. Controlled measuring force to cut operator influence An integrated E‑Force control module provides adjustable measuring force from 1–20 N, an AUTO‑Force mode and colour force indication, reducing variability caused by manual pressure. This feature makes force a controlled parameter rather than a source of error, improving reproducibility on sensitive or soft materials. For operators, the benefit is clear: fewer re-measurements and faster conformity assessments without complex fixturing. Fast data flow and traceable results Built-in memory management holds up to 2,000 values with a folder system and statistics mode, while four transfer modes (wireless to MDS app, wireless HID, wireless HID+MAC and USB HID) enable immediate integration into SPC workflows. The MDS app compatibility and wireless options streamline documentation and reduce transcription errors, so inspection data can feed MES and QA systems directly for rapid trend analysis and audit trails. Durable contact surfaces and official calibration Ceramic-tipped jaws are non-magnetic, non-conductive and highly wear‑resistant, preserving measurement integrity over extended use and on harder surfaces. The delivery set includes the measuring instrument, free versions of the MDS app, a USB data/charging cable and a calibration protocol; the instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), ensuring traceability and acceptance in regulated environments. Its robust design and laboratory reading system make it a practical choice for both shopfloor checks and precision lab tasks. Contact Metav Werkzeuge in Emmerich for tailored technical advice on E‑Force integration and to arrange purchase of the Microtech Metrology DataMet eFORCE caliper — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141088030AK Manufacturer: Microtech Metrology Delivery set: Measuring instrument, Free MDS app versions, USB data/charging cable, Calibration protocol Facts Measuring range: 0–300 mm Resolution options: 0.0002 / 0.001 / 0.01 / 0.1 mm Accuracy: ±0.008 mm Measuring force: 1–20 N Jaw length: 60/20 mm Special features Industry 4.0 E‑Force caliper with 2.0” colour touchscreen LAB caliper with Swiss reading system External ceramic-tipped jaws, non-magnetic and wear-resistant Functions: Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature correction Memory manager with 2,000 values and statistics mode Data transfer: Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID Calibration certificate ISO 17025 (Ilac MRA) included FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, classifying it as a Standard workshop instrument suitable for general machine‑tool and metalworking inspection. Is the measuring force adjustable and how does that help? Yes, the instrument features an E‑Force module with adjustable measuring force from 1–20 N; this reduces variability from operator pressure and improves repeatability for sensitive measurements. Can measurement data be transferred to quality systems? Measurement data from the DataMet eFORCE can be transferred wirelessly to the MDS app, via wireless HID (including HID+MAC) or USB HID, allowing direct input into SPC or MES environments. Does the instrument come with official calibration? The caliper is supplied with a calibration protocol and an ISO 17025 calibration certificate (Ilac MRA), providing traceability for regulated quality systems. What advantages do the ceramic-tipped jaws offer? The ceramic-tipped jaws are non-magnetic, non-conductive and wear-resistant, which helps maintain measurement accuracy over prolonged use and when measuring hard or sensitive surfaces. How much data can be stored on the device? The memory manager can store up to 2,000 values, organised in folders with a statistics mode to support sample logging and basic analysis. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of stable wireless data transfer and simple Windows integration to eliminate manual entries and accelerate quality workflows; the choice between STANDARD (up to 3 instruments) and PRO (up to 8 instruments) allows scalable deployment. Order the interface directly via Metav Werkzeuge or consult our team for configuration advice. USB Dongle — Microtech Metrology wireless Windows interface, up to 8 instruments (PRO) The USB Dongle provides a dedicated wireless link between Microtech measuring instruments and the MDS application for Windows, enabling secure data capture across workshop benches and measurement stations. Stable wireless data transfer up to 50 metres STANDARD: connects up to 3 instruments PRO: connects up to 8 instruments Includes 1 m MDS USB extension cable Streamlined data capture that speeds inspection cycles The USB Dongle offers a practical route to reduce transcription errors and accelerate inspection procedures by providing a stable wireless link with a range of up to 50 metres. With the option of STANDARD or PRO connectivity, the interface permits simultaneous collection from multiple indicators and gauges, turning otherwise manual logging into automated digital records. This measurable improvement in throughput and traceability supports process control and shortens documentation time for routine quality checks. Plug-and-play integration for Windows-based measurement systems Integration is straightforward: the dongle comes with a 1 m USB extension cable for flexible placement of the receiver at the PC, and it is built specifically for the MDS software on Windows. The device supports common Microtech instrument types such as indicators, calipers, micrometers and bore gauges, enabling a single wireless interface to serve mixed-tool setups. As it operates as a dedicated wireless interface for the Windows environment, configuration focuses on pairing and channel management rather than lengthy driver procedures. Dependable transfer and compatibility for workshop environments Designed for reliable daily use, the interface prioritises secure and interference-resistant transfer to maintain data integrity during measurement routines. Simultaneous connections (3 or 8 channels depending on the variant) allow centralised data logging from several measuring points, which is especially useful where rapid batch checks or multi-station measurement are performed. Note that this dongle is required only for the MDS software on Windows and is not used with iOS, macOS, Android or HID modes, ensuring clarity when selecting the correct integration path. For Windows-based measurement workflows, contact Metav Werkzeuge in Emmerich for expert advice and fast supply of the Microtech USB Dongle tailored to STANDARD or PRO configurations. Technical data Article number: 299190001 GTIN: 4061905048005 Brand: Microtech Metrology ECLASS: 19050110 Category: Data transfer and software Core specifications Wireless range: up to 50 metres STANDARD connection capacity: up to 3 instruments PRO connection capacity: up to 8 instruments Included cable: 1 m MDS USB extension cable Supported host: MDS software on Windows (required) Features and compatibility Stable and secure wireless data transfer Supports indicators, calipers, micrometers and bore gauges Not for use with iOS, macOS, Android apps or HID modes Receiver required only for MDS on Windows FAQ Is the dongle compatible with non‑Windows systems? The dongle is intended solely for use with the MDS application on Windows; it is not used with iOS, macOS or Android versions and does not operate in HID modes. How many instruments can be connected at the same time? Depending on the variant, the STANDARD dongle connects up to 3 instruments while the PRO variant supports up to 8 simultaneous instruments. What measuring devices can be paired with the dongle? The dongle supports Microtech indicators, calipers, micrometers and bore gauges for centralised data collection via MDS on Windows. Is an extension cable included for flexible placement? Yes, a 1 m MDS USB extension cable is included to position the receiver for optimal signal reception at the PC. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Integrate reliable Modbus RTU connectivity with compact IP40 protection and configurable serial settings for direct industrial connection; order this interface module directly via Metav Werkzeuge or request technical advice from our consultants. Modbus ASCII data box — Industrial Modbus RTU gateway with RS‑485 and USB‑C The Modbus ASCII data box offers a compact interface for connecting Microtech DataMet instruments to industrial networks, converting USB‑C output to a stable RS‑485 Modbus RTU link for data acquisition and process control. MODBUS RTU output via RS‑485 4‑wire USB‑C connection for Microtech DataMet instruments Configurable 9600 bps baud rate Compact IP40 enclosure 53×82×31 mm Seamless industrial data integration for measurement systems This compact industrial gateway translates instrument output into Modbus RTU, providing deterministic serial communication for PLCs, SCADA systems and data loggers. By offering an RS‑485 4‑wire interface it preserves signal integrity over long cable runs, while the USB‑C link keeps the connection simple for Microtech DataMet devices. The predictable transfer characteristics, including a default 9600 bps rate, reduce integration time and support automated logging and quality control routines, so measurement data can be consumed directly by production systems without custom converters. Reliable operation within standard workshop environments Engineered for everyday industrial conditions, the unit operates between 5–40 °C and up to 70% relative humidity, with an IP40 enclosure that protects against solid ingress in guarded installations. The small footprint ( 53×82×31 mm ) and low mass ( 0.15 kg ) ease panel or enclosure placement where space is at a premium. Supplied without a measuring instrument, the module is intended as a communications accessory to augment existing metrology hardware rather than a standalone gauge, simplifying inventory and allowing the integration of certified instruments already in use. Simple serial configuration and robust protocol support Configuration follows established serial conventions: 8 data bits, 1 stop bit, and no parity, with the baud rate configurable (default 9600 bps) to match existing field devices. The RS‑485 interface accepts the common 4‑wire wiring (5–24 V, GND, A, B), enabling straightforward connection to industrial masters. These well‑known settings minimise engineering adjustments and ensure reliable cyclic polling or event‑driven reporting, which helps maintain measurement traceability and reduces the risk of communication errors during production runs. Suited to metrology workflows and automated data collection As a purpose‑built interface for Microtech instruments, the module supports streamlined data capture and archival in quality systems and MES layers. Its compact design and standardised protocol support lower cabling complexity and make it easier to centralise readings from distributed gauges. For facilities seeking to digitise routine inspection and monitoring tasks, the device provides a practical, low‑effort route to feed laboratory‑grade measurements into control and reporting stacks, improving process transparency and decision reliability. For tailored advice on integrating Microtech instruments via this Modbus gateway, contact Metav Werkzeuge for compatibility checks and ordering from our Emmerich stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141077072 Type: Modbus ASCII data box Protocol: Modbus RTU Device compatibility: Microtech DataMet instruments (USB‑C) Delivery: without measuring instrument Numeric data Working temperature: 5–40 °C Humidity: 70% IP rating: IP40 Baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Dimensions: 53×82×31 mm Weight: 0.15 kg Features & connections RS‑485 4‑wire connection (5–24 V, GND, A, B) USB‑C interface for instrument connection Modbus RTU protocol support Compact enclosure for panel or enclosure integration FAQ Is this data box compatible with Microtech DataMet instruments? Yes. The Modbus ASCII data box is designed to interface with Microtech DataMet instruments via USB‑C and to present their output as Modbus RTU over RS‑485 (SKU 141077072). What are the operating limits for temperature and humidity? The module is specified to operate between 5–40 °C and up to 70% relative humidity, with IP40 protection for typical workshop and industrial environments. Can the communication speed be adapted to existing systems? The device uses a configurable baud rate with a default of 9600 bps; serial settings include 8 data bits, 1 stop bit and no parity to match common industrial masters. What wiring is required for the RS‑485 connection? Wiring follows a 4‑wire RS‑485 scheme (power range 5–24 V, GND, A, B) to ensure robust differential signalling for industrial distances. Is a measuring instrument included with delivery? No. Delivery is without a measuring instrument; the data box is an interface accessory intended to connect with existing Microtech measurement devices. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of a single lead that combines reliable USB-C data transfer, simultaneous charging and a generous 5 m reach to keep measurement workstations uncluttered and efficient; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. USB Data+Charging Cable for Data Met instruments — 5 m, USB-C (Microtech Metrology) The USB Data+Charging Cable for Data Met instruments is a long-reach USB-C lead designed to supply power and transfer measurement data from Microtech Data Met instruments directly into customer applications via HID keyboard mode. 5 m reach for flexible measurement setups USB-C connector for modern instruments HID keyboard mode for direct data input Simultaneous charging and data transfer Consolidated power and data to reduce interruptions The USB Data+Charging Cable for Data Met instruments provides a dual-purpose connection that combines charging and data transfer over a single line, reducing the need for multiple leads and avoiding workflow interruptions. The cable operates in HID (keyboard) mode, which allows measured values to be sent directly into third‑party applications as keystrokes, simplifying integration with existing data capture routines and minimising the need for specialised drivers or middleware. This leads to faster data capture and fewer manual transcription errors. Designed for practical use on the workshop bench With a 5 m length, the lead offers increased flexibility for bench and machine setups where instrument placement and PC or tablet positions vary. The USB-C termination matches modern instrument ports and contemporary host devices, ensuring broad compatibility across current Microtech Data Met instruments. Robust construction and strain relief at each end ensure dependable connectivity during frequent handling, while the extended reach reduces the need to reposition instruments during inspections and routine measurements. Efficient integration for reliable production data Operation in HID mode means the cable behaves like a standard keyboard input, allowing seamless transfer of measurement values into spreadsheets, data-logging software or bespoke customer apps without additional configuration. This plug‑and‑play characteristic supports a smoother production workflow, improved traceability and quicker setup times. When bundled into measurement routines, the combined power and data connection helps maintain continuous operation of handheld metrology devices and portable gauges, thereby increasing throughput and supporting consistent quality control. For compatibility verification or to secure the Microtech 5 m USB‑C data and charging lead for your measurement bench, contact Metav Werkzeuge in Emmerich—our specialists will advise on fitment and delivery from our European hub. Technical Data Article number: 141077025 Length: 5 m Connector: USB-C Content: cable Core measurements Cable length: 5 m Mode: HID (keyboard) data transfer Function: Charging and data transfer Special features Compatible with Microtech Data Met instruments USB data cable for Data Met MICROTECH instruments Charging and data transfer in HID mode FAQ Is this cable compatible with Microtech Data Met instruments? Yes. The cable is specified for Data Met Microtech instruments and connects via USB‑C for direct data and charging functionality. Can measurement data be transferred directly into customer software? Yes. The cable uses HID keyboard mode, enabling direct entry of measured values into spreadsheets and customer applications without additional drivers. Does the lead allow charging while transferring data? Yes. Simultaneous charging and data transfer are supported, so instruments remain powered during measurements. Is the 5 m length suitable for typical bench layouts? Yes. The 5 m reach is intended to provide flexible placement of instruments and host devices without frequent repositioning. Is a driver installation required for data capture? In most cases no. Because the cable presents measured values as keyboard input in HID mode, host systems usually recognise it as a standard input device. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Benefit from robust IP67 protection combined with simple two‑button operation and a built‑in 500 mAh Li‑Pol battery for reliable zero‑setting and direct data saving. Order the DataMet Mobile Button IP67 directly via Metav Werkzeuge or consult our specialists for tailored configurations. DATA BUTTONS DataMet IP67 — wireless two‑button control unit with IP67 protection DATA BUTTONS DataMet IP67 is a compact wireless control unit for quick zero setting and automatic data transfer with Microtech instruments and the MDS Windows application. *IP67 waterproof protection for harsh environments *Two-button operation for zeroing and data save *Rechargeable 500 mAh Li-Pol battery built in *Saves and synchronises with MDS app for Windows Streamline measurement workflows with direct wireless control The compact controller enables immediate zero setting and data saving without returning to the instrument, reducing handling time and process interruptions. As a multifunctional interface for Microtech instruments and the MDS app (Windows), the unit supports both local memory storage and app synchronisation, allowing traceable measurement records and efficient batch captures. This reduces manual transfer errors and shortens inspection cycles, improving throughput in production and quality control. Durable, portable design for on‑site and bench use Built to IP67 standards, the device resists dust and temporary immersion, making it suitable for demanding shop‑floor environments. The rechargeable Li‑Pol 500 mAh battery provides dependable operation and is integrated to avoid the need for disposable cells. With dimensions of 75 x 50 x 30 mm, a weight of 0.15 kg and a 10 mm button diameter, the controller is ergonomically easy to handle whether used as a mobile stick or a desktop panel. Visual feedback is provided via an LED status indication, ensuring clear operation confirmation in noisy or busy settings. Flexible integration and custom configuration options Connection is implemented for seamless pairing with Microtech measurement instruments and synchronisation to the MDS app for Windows, enabling data to be written either to the instrument memory or directly to the application. Two physical buttons cover the primary functions—zero and save—while additional custom functions can be specified on request for specialised workflows. Available as a mobile two‑button stick or a desktop two‑button panel, the unit adapts to both handheld inspection and fixed workstation setups, simplifying retrofit projects and mixed‑device fleets. Contact Metav Werkzeuge for expert advice on integrating the Microtech Metrology DataMet IP67 into existing measurement workflows and to request a tailored configuration from our Emmerich warehouse Technical data Article number: 299900012 Label: DATA BUTTONS DataMet IP67 Manufacturer: Microtech Metrology Facts Buttons: 2 Battery: 500 mAh Li‑Pol Button diameter: 10 mm Dimensions: 75 x 50 x 30 mm Weight: 0.15 kg Protection class: IP67 Special features Wireless connection to Microtech instruments Synchronises with MICROTECH MDS app for Windows Saves data to instrument memory or MDS app LED status indication Available as mobile stick or desktop panel Custom functions available on request Built‑in rechargeable battery FAQ How does the controller connect to measurement instruments? The DataMet Mobile Button IP67 connects wirelessly to Microtech Metrology instruments and synchronises readings with the MICROTECH MDS app for Windows, allowing both local memory storage and app‑based saving. Can the device be used in wet or dusty production areas? Yes. The DataMet Mobile Button IP67 is IP67 rated, making the unit dust‑tight and protected against temporary immersion, suitable for challenging shop‑floor environments. What battery life and maintenance are expected? The unit employs a built‑in 500 mAh Li‑Pol battery; typical uptime depends on usage patterns, but rechargeable design eliminates disposable cell changes and simplifies upkeep for the DataMet Mobile Button IP67. Are custom functions or different housings available? Custom functions can be requested for specialised workflows; the controller is available as a mobile two‑button stick or as a desktop two‑button panel to suit specific application needs for the DataMet Mobile Button IP67. Is visual feedback provided for successful operations? Yes. The device includes an LED status indication that shows connection and save status, ensuring clear confirmation of zeroing and data storage actions for the DataMet Mobile Button IP67. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of a ready-to-use data-collection solution that combines MDS 5.5 PRO Windows software, autoconnection and data synchronisation with tangible hardware: two USB dongles and two 1 m cables enable simultaneous linking of multiple instruments. Order the accessory kit directly via Metav Werkzeuge or consult our specialists for integration advice. Accessory kit — MDS Connection Set by Microtech Metrology (ready-to-use data-collection solution, Windows) Accessory kit provides an immediate, workshop-ready interface for collecting measurement data from Microtech instruments and performing zero setting via the bundled software Ready-to-use data-collection kit Includes MDS 5.5 PRO software licence Two USB dongles and two 1 m cables Supports up to 10 simultaneous connections Faster, error-resistant data capture from the first connection The MDS 5.5 PRO software bundled with this accessory kit turns standard measurement routines into a streamlined data flow. With autoconnection and data synchronisation, instrument readings are transferred with minimal manual intervention, reducing transcription errors and saving time in quality-control cycles. As a ready-to-use collection solution, the set supports direct zero setting on compatible devices and accelerates the handover of digital records into inspection protocols, making traceable measurement workflows feasible without complex custom integration. Flexible hardware that scales with workshop needs Hardware in the connection set is configured to suit multi-instrument setups: two USB dongles, two 1 m cables and optional DataMet Buttons or a footswitch enable local control and convenient data capture. The kit supports up to 10 connections, allowing several gauges or probes to be connected concurrently for batch inspections or station-based monitoring. This arrangement reduces cable clutter and simplifies station layout while enabling concurrent data capture from multiple sources, which increases throughput in repetitive measurement tasks. Simple integration and predictable operation for production use Designed for seamless integration with Microtech instruments, the connection set provides a consistent interface for data collection and storage. The package is supplied as a complete set and is particularly useful where standardised data logging and repeatable zeroing are required. Built for workshop resilience, the combination of compact dongles and short, robust cables offers dependable day-to-day operation and straightforward replacement of individual components when needed. The clear separation of software and hardware functions makes updates and maintenance predictable and cost-effective. For tailored supply and expert guidance on integrating the Microtech connection set into existing measurement workflows, contact Metav Werkzeuge for a pragmatic consultation and rapid delivery from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 299110810 GTIN: 4061905452673 Manufacturer: Microtech Metrology Max connections: 10 USB dongles (PRO): 2 Cables (1 m): 2 Kit pieces per set: 5 MDS 5.5 PRO app for Windows Ready data-collection solution from box Autoconnection and data synchronisation Optional DataMet Buttons and footswitch FAQ What is included in the accessory kit? The accessory kit contains the MDS connection hardware and software components: two USB dongles, two 1 m cables, the MDS 5.5 PRO application for Windows and the set contents as listed under article number 299110810. Can the connection set work with multiple Microtech instruments at once? Yes, the MDS Connection Set is engineered to support up to 10 simultaneous connections with Microtech instruments, enabling concurrent data capture across several devices. Is the supplied software compatible with standard Windows systems? The MDS 5.5 PRO app bundled with the connection set is designed for Windows platforms and facilitates data synchronisation and zero setting for Microtech Metrology devices. Are optional control devices included or sold separately? Optional items such as DataMet Buttons and a footswitch are referenced as available accessories; the core set lists them as optional for localised data collection control. How does the kit improve measurement workflows? By combining autoconnection, immediate zero setting and centralised data synchronisation, the connection set reduces manual steps and transcription errors, streamlining measurement logging in routine quality checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of a compact, connected control that combines ZERO setting and reliable data saving with a rechargeable battery for uninterrupted workflows; the robust LED status feedback and choice of one- or two-button operation enable faster, safer capture of measurement points. Order the DataMet FOOTSWITCH Double Touch directly via Metav Werkzeuge or ask our consultants if needed. DataMet FOOTSWITCH Double Touch — multifunction footswitch with Li‑Pol battery and Windows MDS app connectivity (Microtech Metrology) The DataMet FOOTSWITCH Double Touch is a compact control pedal for precision measuring setups, designed to provide zeroing and data transfer to DataMet instruments or the Microtech MDS app on Windows for efficient process integration. Multifunction control for DataMet instruments Zero and save data to instrument or MDS app Built-in rechargeable 500 mAh Li‑Pol battery LED status indicator and compact 120×90×40 mm size Faster, more reliable data capture for measurement workflows The pedal provides direct control over ZERO setting and immediate data storage, reducing the number of manual steps between taking a value and archiving it. By enabling local saving to the instrument memory or synchronisation with the MDS app on Windows, the device shortens cycle times and lowers the risk of transcription errors. The compact footprint (120×90×40 mm) and light weight (0.2 kg) make the unit easy to position at the workstation without obstructing access to the gauge or machine, while the clear LED status indication confirms successful zeroing and data transfer at a glance. Integration and configuration to match production needs Available in single‑button and dual‑button variants, the pedal accepts predefined or custom command mappings for common tasks such as zeroing, triggering measurement capture, and initiating file synchronisation. The built‑in rechargeable Li‑Pol battery (500 mAh) supports continuous use while avoiding loose cables on the floor; recharging is straightforward and the battery specification balances runtime with compact design. For automated data workflows, the footswitch connects seamlessly to Microtech metrology instruments and the MDS app, enabling immediate storage to device memory and later transfer for traceable records. Durable, ergonomic design that supports shop‑floor routines The enclosure and switch layout prioritise repeatable operation and tactile clarity, which reduces operator variability when performing frequent zeroing or save actions. The pedal’s LED status improves operator confidence by signalling connection and battery states without looking away from the workpiece. Custom functions can be specified on request to adapt the pedal to particular measurement sequences or CNC probing setups, turning a simple control into a tailored interface that speeds up inspection loops and minimises handling time. Contact Metav Werkzeuge for tailored configuration or purchase advice on the Microtech DataMet FOOTSWITCH Double Touch and benefit from local stock and application support near your workshop. Technical data Article number: 299900022 SKU: 299900022 Brand: Microtech Metrology Product: DataMet FOOTSWITCH Double Touch Facts Dimensions: 120 × 90 × 40 mm Weight: 0.2 kg Battery capacity: 500 mAh Variants: 1‑button or 2‑button Special features Functions: ZERO and save data to instrument memory or MDS app Connectivity: DataMet instrument link and Windows MDS app synchronisation Indicator: LED status indication Power: Built‑in rechargeable Li‑Pol battery Customisation: Custom functions available on request FAQ How does the footswitch transmit measurement values to software? The pedal saves values directly to the instrument memory or synchronises with the Microtech MDS app on Windows, enabling immediate capture and later export for traceable records. Is there a battery inside and how long does it last? The unit includes a built‑in Li‑Pol battery (500 mAh); the battery supports typical shop‑floor use and is rechargeable to avoid cable clutter. Can the footswitch be used with different DataMet instruments? Yes, the footswitch is designed for connection with DataMet instruments from Microtech Metrology and supports standard save and zero functions. Are there options for different button layouts? Yes, the product is available as a single‑button or dual‑button footswitch, and custom functions can be implemented on request to suit specific measurement workflows. What does the LED status indicate? The LED status reports operational states such as connection, successful zeroing and data save, and battery/charging status for immediate visual feedback. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of autoconnection, data synchronisation and a complete Windows application for faster quality checks and fewer transcription errors; order the OPTIMA MDS data set directly via Metav Werkzeuge or ask our consultants if needed. OPTIMA MDS data set — Data-collection kit with MDS 5.5 and autoconnection The OPTIMA MDS data set is a ready-to-use data-collection solution for Microtech measurement instruments, designed for shop-floor and lab environments to automate readings, perform zero-setting and synchronise measurement data under Windows. Ready data-collecting solution from box Autoconnection and data synchronisation Includes MDS 5.5 Windows app and USB dongles Reliable data capture for inspection workflows The kit brings a pragmatic route to digital measurement capture by combining the MDS 5.5 Windows application with immediate hardware for connection. Built-in autoconnection and continuous data synchronisation reduce manual entry and cut reporting time, while support for max connections 6 enables concurrent monitoring of several instruments. Two USB dongles and two 1 m cables are included to start data acquisition straight away, which accelerates batch inspections and makes logging reproducible. The technical approach removes routine friction from quality-control loops and clarifies traceability for production records. Hands-free and flexible collection to suit production Workflows that demand fast, repeatable capture benefit from the available hands-free options: optional DataMet Buttons and a footswitch allow tactile data collection and instant zero setting, keeping operator interaction steady and consistent. Zero-setting at the instrument removes offset errors before measurement sequences, which is particularly useful when switching fixtures or aligning gauges. The set's connection modes and synchronised reading strategy permit consistent sampling across varying measurement tasks, improving throughput in both repetitive production and small-batch inspection. Quick installation and Windows integration for fast ROI Installation focuses on rapid deployment: the solution is ready-to-use with the included software and hardware, minimising setup time on Windows workstations. The MDS 5.5 standard app handles data recording and export, while the included cables and dongles avoid extra procurement steps. This plug-and-play characteristic shortens the path to measurable benefits, such as fewer non-conformances and faster data reporting cycles. Compatibility with Microtech instruments ensures that measurement signals are interpreted correctly and handed off in a consistent format for downstream analysis. Scalable, shop-floor friendly solution for consistent measurements The configuration supports small multi-instrument setups and can be extended within its six-connection limit to cover typical bench-level requirements. Synchronised readings and automated connection handling reduce operator variability and enhance overall measurement reliability, making the system suitable for both workshop quality checks and laboratory documentation. Optional accessories allow adaptation to specific processes without altering the core collection workflow, preserving data integrity while supporting productivity improvements. Choose Microtech-grade data capture with the OPTIMA MDS data set and contact Metav Werkzeuge in Emmerich for tailored advice and secure supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 299110506 Label: OPTIMA MDS data set Manufacturer: Microtech Metrology Application: MDS 5.5 STANDARD app for Windows Facts SKU / UID: 299110506 Max connections: 6 USB dongles: 2 Cables: 1 m (2 pieces) Special features Ready data-collecting solution from box Autoconnection and data reading synchronising Connection modes for flexible setups Optional DataMet Buttons and footswitch for collection and zero setting Collects data from Microtech instruments and supports zero setting FAQ What does the kit include? The OPTIMA MDS data set includes the MDS 5.5 STANDARD application for Windows, two USB dongles and two 1 m cables; optional DataMet Buttons and a footswitch are available for hands-free collection. How many instruments can be connected at once? The system supports a maximum of 6 simultaneous connections, allowing several Microtech instruments to be monitored and logged in parallel. Is zero setting supported during collection? Yes, zero setting is supported; the OPTIMA MDS data set provides zero-setting functionality and optional footswitch or button control for repeatable baseline procedures. Which operating system is required? The MDS 5.5 STANDARD application operates on Windows, as supplied with the data-collection kit for straightforward integration into typical inspection stations. Are hands-free controls included as standard? Hands-free controls such as the footswitch and DataMet Buttons are listed as optional accessories; the standard delivery contains the software, two USB dongles and two 1 m cables. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Reliable, ready-to-run data collection is achieved by combining autoconnection, the MDS 5.5 PRO Windows app and the IP67 DataMET interface, enabling synchronised readings and rapid zero setting for reduced downtime. Order the accessory set directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology MDS PRO Connection Accessory Set — ready-to-use data collection, up to 18 connections The Microtech Metrology MDS PRO Connection Accessory Set is a compact, preconfigured kit for integrating Microtech measuring instruments into a Windows-based data workflow, designed for production environments and quality labs. Ready-to-run data collection kit Up to 18 simultaneous connections Includes MDS 5.5 PRO Windows app IP67 DataMET 2-button interface included Faster, centralised measurement logging for production control The kit delivers centralised data capture by pairing the MDS 5.5 PRO software with hardware that automates device links and reading transfer. Autoconnection and synchronising functions remove manual entry steps, cutting transcription errors and saving hands-on time during inspection cycles. With support for multiple dongles and interfaces, the system scales to mid-size benches and assembly lines while maintaining consistent data flow and auditability for quality processes. Durable interface and practical peripherals for shop-floor use Hardware in the set is selected for reliability: DataMET IP67 ensures the primary interface tolerates humid or oily environments, while the supplied USB dongles and 1 m cables provide straightforward, tool-free connections. Optional footswitch and extra DataMET buttons allow ergonomic data capture that reduces operator movement and cycle time. These physical features minimise interruptions and contribute directly to repeatable acquisition under typical workshop conditions. Ready-to-deploy workflow with traceable zeroing and broad compatibility Out of the box readiness and integrated zero setting mean the system is live quickly, simplifying commissioning. The combination of automatic zeroing and synchronised readings supports traceability, simplifying downstream reporting and reducing inspection variance. Designed to work with Microtech instruments, the set supports simultaneous links (up to 18 connections) so small networks of measuring devices can feed a single Windows instance for consolidated reporting and control. For fast integration and reliable, shop-floor grade data capture, contact Metav Werkzeuge in Emmerich to order the Microtech accessory set or request tailored advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 299110840 GTIN: 4061905452680 Brand: Microtech Metrology Core technical data Max connections: 18 USB dongles: 3 Cable length: 1 m (3 cables) DataMET IP67 units: 1 Special features MDS 5.5 PRO app for Windows Autoconnection Data reading synchronising Zero setting function Optional DataMET buttons and footswitch Ready-to-use out of the box FAQ What operating system is required for the kit? The MDS PRO Connection Accessory Set uses the MDS 5.5 PRO application, which is supplied for Windows environments and configured for immediate deployment. How many instruments can be connected at once? The package supports up to 18 connections, allowing multiple Microtech instruments to stream readings into one central Windows instance. What does the kit include as standard? Contents include the MDS 5.5 PRO app (Windows), 3 USB dongles, 3 × 1 m cables, 1 × DataMET IP67 (2-button) interface, and options for additional DataMET buttons or a footswitch; SKU 299110840 identifies this set. Is the DataMET interface suitable for harsh environments? Yes, the DataMET unit is IP67-rated, providing dust-tight protection and temporary immersion resistance for robust shop-floor performance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools