10-92mm Clamping Wedge For T-Slot 12+14mm, M12 Thread - AMF
Take advantage of precise T-slot compatibility and a wide clamping range to streamline fixture setup: the combination of compatibility with 12 and 14 mm T-nuts and an adjustable clamping height of 10–92 mm enables faster, more repeatable clamping. Order the component directly via Metav Werkzeuge or consult Metav's technical team for application advice. Clamping Iron No. 6314V — T-slot clamp for 12/14 mm T-nuts, 10–92 mm clamping height (AMF) The Clamping Iron No. 6314V is a dedicated T-slot clamping element designed for secure fixturing in machine tables and modular workholding systems; suited to setups using 12 mm and 14 mm T-nuts with an adjustable clamping height range of 10 to 92 mm. T-slot compatible with 12 and 14 mm Adjustable clamping height 10–92 mm Suited for M12 and M14 fastening Precision and compatibility for reliable fixturing The clamping iron is engineered to integrate with standard T-slot tables that use 12 mm or 14 mm T-nuts, providing a dependable interface for a wide range of fixtures. The large clamping height (10–92 mm) allows variation in workpiece thickness without swapping parts, which reduces changeover time. For users unfamiliar with the term, clamping height describes the vertical range that the clamp can accommodate between its lowest and highest position; a broader range means fewer intermediate components are required. This characteristic supports consistent clamping pressure and repeatable setups in daily workshop and production environments. Quick assembly and standardised fastening for reduced downtime Designed for compatibility with common bolt sizes, the component features a thread M12 and is suitable for M12 and M14 fastening solutions, enabling direct connection to typical clamping bolts and studs. The 14 mm useful width and 100 mm overall length make it compact yet effective for tight fixturing arrangements. These standard dimensions facilitate rapid retrofitting into existing clamping systems and reduce the need for bespoke adapters. The result is a tangible improvement in setup efficiency and less time lost on mechanical integration. Consistent stock item for workshop and production use As a purpose-built fixture element from AMF, this clamping component (SKU 4000603022NW) is supplied as a single unit (packaging unit: 1), making it straightforward to order and keep as a spare in stores or toolrooms. The standardised geometry supports interchangeability across machines and fixtures, which simplifies inventory management and planning. Specifying standard components like this reduces risk in procurement and helps maintain steady production flow through predictable replacement and maintenance cycles. For ordering, technical clarification or to source compatible fastening hardware for AMF clamping components contact Metav Werkzeuge — reach out via info@metav-werkezeuge.com or call +49 2822 7131930 for tailored advice and next‑day supply options Technical data Article number: 4000603022NW Type: Nr. 6314V Brand: AMF Product type: Clamping iron Facts Clamping height: 10 - 92 mm T-nut compatibility: 12 + 14 mm Width: 14 mm Overall length: 100 mm Thread: M12 Suitable for: M12, M14 Special features Packaging unit: 1 SKU: 4000603022NW Label reference: Spanneisen Nr.6314V f.T-Nut 12+14mm Spann-H.10-92mm AMF axite_enrichment: A: 20; B2: 40; E1: 21; E2: 40; LS: 94 FAQ What table types is this clamping element compatible with? This clamping iron is compatible with machine tables and fixtures that accept 12 mm or 14 mm T-nuts, enabling installation on many common industrial and workshop T-slot systems. Which bolt sizes can be used with this clamping iron? The component is designed around a thread M12 and is suitable for both M12 and M14 fastening arrangements, which permits use with standard clamping bolts and studs. How does the clamping height affect fixture flexibility? The 10–92 mm clamping height range allows the clamp to secure different workpiece thicknesses without additional risers, increasing flexibility and reducing the number of parts needed for varied production runs with the Clamping Iron No. 6314V. What is the exact product reference for ordering? Order the part using SKU 4000603022NW or type reference Nr. 6314V; both identifiers correspond to the AMF clamping iron described above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.5mm Washer DIN 6340 For M10 Screws, Thickness 4mm - AMF
Take advantage of standardised dimensions and reliable load distribution thanks to the DIN 6340 conformity and a precise 10.5 mm bore; the robust 4 mm thickness and 28 mm outer diameter ensure consistent clamping performance in M10 assemblies. Order and procurement can be arranged via Metav Werkzeuge or by consulting the sales team for batch needs. U washer DIN 6340 AMF — Flat washer for M10, 10.5 mm bore A U washer DIN 6340 AMF engineered to distribute clamping forces evenly in M10 bolted connections for industrial and workshop assembly applications. Compliant with DIN 6340 standard Suited for M10 bolted connections Bore diameter 10.5 mm for secure fit Predictable fit and conformity for reliable assemblies Conformity with DIN 6340 provides a predictable, standardised geometry that simplifies component selection and inventory management. The specification ensures interchangeability across production batches and replacement parts, reducing downtime caused by non‑matching components. The combination of standard compliance and clearly defined dimensions supports consistent mechanical behaviour under load and aids quality control procedures. Secure load distribution with defined dimensions The washer’s 10.5 mm bore aligns with M10 shaft tolerances while the 28 mm outer diameter increases contact area to distribute clamping forces over the joining surfaces. A thickness of 4 mm contributes to rigidity and reduces local deformation under torque. These dimensional characteristics translate into reduced surface marking and improved joint stability in repeated assembly cycles. Practical use and supply reliability for industrial workflows Designed for routine use in maintenance, machine assembly and fastening applications, this flat washer supports efficient workshop operation through straightforward compatibility with common fasteners. Sourced via Metav Werkzeuge, the product benefits from a secure supply chain and quality filtering at the Emmerich location, which helps ensure consistent availability and trusted origin for production and service parts. For procurement guidance or technical clarification regarding AMF washers, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4000833437NW Description: U washer DIN 6340 for screws M10, bore 10.5 mm Manufacturer: AMF Type: Washer Packaging unit: 1 Facts Suitable for: M10 Bore (D1): 10.5 mm Outer diameter (D2): 28 mm Thickness (S): 4 mm Standard: DIN 6340 Special features Compliant with DIN 6340 Flat / U washer design For bolted connections and load distribution Brand: AMF FAQ What standard does this washer comply with? The washer conforms to DIN 6340; the U washer DIN 6340 AMF is manufactured to this standard to ensure consistent dimensions and fit. Which screw size is this washer intended for? This washer is intended for use with M10 screws; the 10.5 mm bore provides the recommended clearance for a proper fit. What are the key dimensions of the washer? Key dimensions: bore 10.5 mm (D1), outer diameter 28 mm (D2), thickness 4 mm (S); these figures describe the washer’s load‑bearing geometry. Is this product suitable for industrial assembly work? Yes, the washer’s standardised geometry and robust thickness make the item suitable for routine industrial and workshop assembly tasks, where consistent clamping behaviour is required. How is the product identified in the catalogue? The item is listed under SKU 4000833437NW and described as a U washer DIN 6340 for screws M10 with a 10.5 mm bore Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm T-Slot Cover Profile 12mm Aluminium, Cut-To-Length Compatible - AMF
Take advantage of a protective aluminium profile designed for 12 mm T‑slots and supplied in a ready 1,000 mm length; order the cover strip directly via Metav Werkzeuge or ask our consultants if needed. Cover strip No. 6486 — 12 mm T‑slot, 1,000 mm (AMF) The Cover strip No. 6486 is an aluminium profile cover strip for protecting and finishing 12 mm T‑slots on machine tables and fixtures. Fits 12 mm T‑slot profiles Ready length 1,000 mm Made from aluminium profile Easily sawn to required length Robust protection for machine tables and fixtures The aluminium construction offers reliable protection from chips, coolant and ingress at the T‑slot interface, helping to keep work surfaces clean and reduce maintenance downtime. Its profile form provides a flush finish that prevents burrs and snagging, while the lightweight nature of the material minimises additional load on slides and fixtures. By covering the slot, the strip contributes to smoother handling during clamping operations and reduces the frequency of cleaning cycles, improving overall workshop efficiency. Flexible length and simple on-site adjustment Supplied in a 1,000 mm standard length, the profile can be cut to length with a fine saw blade to match bespoke table dimensions or fixture layouts. This adjustability avoids the need for multiple specialised lengths in stock and accelerates installation, as the strip can be tailored precisely on site. The compatibility with 12 mm T‑slots ensures straightforward integration into common machine table systems, allowing quick finishing work without complex rework or additional tooling. Durable, lightweight material with practical handling benefits Manufactured from an aluminium profile, the strip combines durability with corrosion resistance and low weight, which simplifies handling during assembly and reduces wear on moving parts. The material choice also supports long service life under normal workshop conditions while being easy to machine when alterations are required. Finished edges and a stable profile preserve the integrity of adjacent workpieces and fixtures, contributing to a safer, more orderly workspace that supports consistent production quality. Contact Metav Werkzeuge for supply and expert advice on integrating AMF cover strips into machine tables; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4123530120NW Type: Nr. 6486 Product: Cover strip (Abdeckleiste) Brand: AMF Packaging unit: 1 Facts T‑slot width: 12 mm Length: 1,000 mm Packaging unit: 1 Special features Material: aluminium profile Suitable for T‑slot protection and finishing Can be cut to desired length with a fine saw blade FAQ Does this cover strip fit 12 mm T‑slots? Yes. The cover strip No. 6486 by AMF is designed specifically for 12 mm T‑slot profiles and provides a snug protective finish. Can the profile be shortened on site? Yes. The aluminium profile can be cut to the required length with a fine saw blade; the product is supplied in a 1,000 mm length for flexible installation. What material is the cover strip made from? The strip is made from an aluminium profile, offering a balance of durability, corrosion resistance and low weight for easy handling. Is the cover strip suitable for machine table finishing? Yes. The design and material make it suitable for protecting and finishing T‑slots on machine tables and fixtures, reducing contamination and wear. How is the product supplied? The item is supplied as a single unit (packaging unit 1) under article number 4123530120NW and type Nr. 6486 Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm T-Slot Cover Strip 16mm For T-Slot, Aluminium Profile - AMF
Combining a lightweight aluminium profile with a precise fit for 16 mm T‑slots and a standard 1,000 mm length, this cover strip protects machine tables and T‑slot channels while allowing easy on‑site trimming. Order the AMF T‑slot cover strip directly via Metav Werkzeuge or consult our technical team for fitment and compatibility. Abdeckl.Nr.6486 16 mm x 1000 mm – T‑slot cover strip (AMF) A Abdeckl.Nr.6486 16 mm x 1000 mm cover strip designed to protect and conceal 16 mm T‑slots on machine tables, workbenches and aluminium profiles. Fits 16 mm T‑slots Length 1000 mm Aluminium profile material Can be cut to custom length Protects machine beds and reduces contamination The cover strip offers a straightforward solution for safeguarding T‑slot channels against debris and coolant ingress. Made from an aluminium profile, the component provides a durable barrier that prevents chips and dirt from accumulating in the slot, which helps maintain clamping accuracy and reduces cleaning intervals. By covering the channel, the profile also minimises the risk of workpiece damage during handling, supporting continuous production and lowering maintenance effort. Simple trimming and quick installation for workshop flexibility Designed for on‑site adaptation, the profile can be cut to length with a fine saw blade without specialist tools, enabling rapid customisation to different machine tables or profile runs. The straight geometry and standardised fit for 16 mm T‑slots make alignment and insertion fast, so retrofitting or replacing protective strips requires minimal downtime. The ease of modification supports versatile workshop layouts and helps planners adjust to bespoke machines or fixtures without long lead times. Reliable compatibility and practical material choice The aluminium construction combines light weight with sufficient stiffness for a neat finish along the slot edge; the material is suitable for standard workshop environments and is easy to handle during assembly. Compatibility with standard T‑slot systems means the strip integrates with existing clamping hardware and profiles, offering a clean visual result and consistent protection. The durable profile reduces the frequency of replacements and contributes to a more organised, professional workbench. Contact Metav Werkzeuge for tailored advice on integrating the AMF T‑slot cover strip into existing equipment or to confirm stock availability via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4123530160NW Type: Nr. 6486 Label: Abdeckl.Nr.6486 16 mmx1000mm z.T-Nut AMF Facts T‑slot width: 16 mm Length: 1000 mm Packaging unit: 1 Special features Material: aluminium profile Application: for T‑slot Cutting: can be cut to desired length with a fine saw blade FAQ Is this profile suitable for standard 16 mm T‑slots? Yes. The AMF cover strip is specified for 16 mm T‑slots and is designed to fit standard slot geometries. Can the cover strip be shortened on site without special tools? The aluminium profile can be cut to length using a fine saw blade, allowing straightforward on‑site trimming. Will the cover strip resist typical workshop conditions? The aluminium construction provides a robust, lightweight protection suited to standard workshop environments and routine handling. Does the strip interfere with clamping hardware in the slot? The profile is intended to cover the slot channel; it can be removed or trimmed where clamping elements must be accessed to ensure full compatibility. What is the article number for ordering and reference? The product is listed under article number 4123530160NW (Type Nr. 6486). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm T-Slot Cover Strip 18mm Aluminium Profile, Cuttable - AMF
Take advantage of a durable, aluminium-based profile that protects 18 mm T‑slots and can be trimmed on site; the strip’s 1000 mm length and simple sawability reduce stock complexity while preserving machine table integrity — order or consult Metav Werkzeuge for tailored delivery and technical advice. Cover strip No. 6486 — T‑slot cover strip, 18 mm × 1000 mm (AMF) The cover strip No. 6486 is a protective aluminium profile designed to close and protect 18 mm T‑slots on machine tables and framing systems, providing a neat, low-wear surface for industrial and workshop applications. Cover strip »No. 6486« by AMF For 18 mm T‑slots Length 1000 mm, aluminium profile Easy to cut to length with a fine saw blade Protects machine tables and fixtures with a clean finish The cover strip is intended to prevent swarf, dust and loose contaminants from collecting in machine table grooves, so that fixtures remain precise and maintenance intervals are extended. Installed over an 18 mm T‑slot, the profile creates a continuous surface that minimises snagging and makes cleaning straightforward. Robust aluminium construction keeps weight low while ensuring stable edge protection, and the aluminium surface is compatible with standard workshop cleaning methods without special treatments. Quick on-site adaptation to reduce inventory needs Supplied as a 1000 mm bar, the profile is designed for fast length adaptation: cutting to the required dimension is possible with a fine saw blade, allowing immediate fitting without specialist tooling. This flexibility reduces the need to stock multiple lengths and supports lean procurement models in production and maintenance departments. The ability to trim the strip on site shortens lead times for custom installations and simplifies spare-part logistics across different machines. Durable profile for everyday industrial use Made from an aluminium profile, the strip offers a corrosion-resistant surface that withstands routine workshop exposure and mechanical contact. The material choice combines durable performance with an acceptable surface hardness for general protection tasks, meaning the strip protects expensive fixtures while remaining easy to handle during assembly. Low-maintenance characteristics contribute to predictable total cost of ownership and uninterrupted production workflows. Straightforward compatibility with T‑slot systems Designed specifically for T‑nut style grooves, the profile matches standard T‑slot dimensions and is therefore suited to a wide range of machine tables, assembly jigs and framing systems. The simple geometry ensures reliable seating in the groove and a secure visual result for finished installations. Supply is supported through Metav’s distribution channel, offering customers the assurance of consistent quality control from Emmerich and straightforward replenishment across European operations. Contact Metav Werkzeuge to confirm dimensional compatibility for specific setups and to arrange supply of the AMF cover strip No. 6486 directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4123530180NW Type: Nr. 6486 Label: Abdeckl.Nr.6486 18 mmx1000mm z.T‑Nut AMF Product type: Abdeckleiste Manufacturer: AMF Facts T‑slot width: 18 mm Length: 1000 mm Packaging unit: 1 SKU: 4123530180NW Special features Material: aluminium profile Suitable for T‑nut Cut to length with fine saw blade Brand: AMF Compatible with T‑slot systems FAQ Can the cover strip be shortened on site? Yes. The cover strip No. 6486 (AMF, SKU 4123530180NW) can be cut to the required length using a fine saw blade without compromising the profile function. Which groove size does this strip fit? The profile is designed for an 18 mm T‑slot; compatibility with 18 mm T‑slot systems is specified for the AMF cover strip No. 6486. Is the material suitable for industrial environments? The strip is made from an aluminium profile, which offers good resistance to workshop conditions and supports routine cleaning and low maintenance for the AMF cover strip No. 6486. Can the strip be used on machine tables and framing systems? Yes. The cover strip No. 6486 is intended for use on machine tables, assembly jigs and framing profiles that employ 18 mm T‑slots. What is included in one packaging unit? One packaging unit contains a single cover strip No. 6486 (1000 mm length) as listed under SKU 4123530180NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm T-Slot Cover Strip 22mm, Aluminium Profile - AMF
Benefit from a robust aluminium profile that protects T-slots, keeps the machine table clean and can be cut to the required length; combine simple fitting with long-term reliability. Order the cover strip No. 6486 directly via Metav Werkzeuge or ask our consultants if needed. Cover strip No. 6486 – T-slot cover strip, 22 mm × 1,000 mm (AMF) A Cover strip No. 6486 engineered to shield 22 mm T-slots and maintain a tidy machine table for fixtures and accessories. Fits 22 mm T-slots 1,000 mm aluminium profile Can be cut to required length Protects slot from chips and dust Keeps T-slots clear and reduces downtime The 22 mm T-slot compatibility ensures reliable protection where standard fixtures sit. By preventing swarf and coolant ingress, the cover strip minimises cleaning intervals and reduces the risk of fixture misalignment. The profile’s aluminium construction delivers a balance of rigidity and lightness, helping to preserve clamping accuracy without adding unnecessary mass to the workbench. Easy modification and straightforward fitting Delivered as a 1,000 mm aluminium extrusion, the profile can be trimmed on site using a fine-toothed saw blade to achieve the exact length required. This on-the-spot adjustability removes the need for bespoke parts and shortens preparation time before assembly. The simple geometry allows insertion into the T-slot without specialised tools, facilitating faster machine turnaround and a more efficient workflow. Durable workshop performance and practical benefits Constructed from an aluminium profile suited to industrial environments, the cover strip resists corrosion and is dimensionally stable under normal workshop conditions. The product protects the slot from mechanical damage and contamination, helping to extend the lifetime of clamping elements and reducing maintenance effort. Where cleanliness and repeatable set-ups matter, this profile offers a pragmatic, low-maintenance solution. For product inquiries, compatibility checks or to request a supply from AMF, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, expert assistance Technical data Article number: 4123530220NW Type: Nr. 6486 Label: Abdeckl.Nr.6486 22 mmx1000mm z.T-Nut AMF Brand: AMF Product type: Cover strip (Abdeckleiste) Facts T-slot width: 22 mm Length: 1,000 mm Packaging unit: 1 Material: Aluminium profile Special features Suitable for T-slots Can be cut to length with a fine saw blade Protects slot from chips and dust Simple, tool-light insertion into the slot FAQ Is this profile suitable for a 22 mm T-slot? The cover strip No. 6486 is designed for 22 mm T-slots and will fit standard 22 mm slot profiles; reference SKU 4123530220NW. Can the cover strip be shortened to fit non-standard lengths? Yes, the aluminium profile can be cut to the required length using a fine-toothed saw blade without affecting fit or function. What material is the cover strip made from and is it durable in workshop use? Made from aluminium, the cover strip offers corrosion resistance and sufficient rigidity for routine workshop conditions; product: Cover strip No. 6486 (AMF). Will the profile protect against coolant and swarf ingress? The design shields the T-slot from swarf and most coolant splashes, helping to keep fixtures and clamps cleaner and reducing maintenance. Is specialised fixing hardware required for installation? No specialised hardware is necessary; the profile is intended for straightforward insertion and trimming to size for a secure fit. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm T-Slot Cover Strip Aluminium Profile With 28mm T-Slot, Cut-to-Length Compatible - AMF
Benefit from a durable aluminium profile, precise compatibility with 28 mm T‑slots and the convenience of on-site length trimming — order the cover strip directly via Metav Werkzeuge or consult our advisors for fast clarification. Cover Strip Nr. 6486 (AMF) — Aluminium profile for 28 mm T‑slot, 1,000 mm The Cover Strip Nr. 6486 is an aluminium profile designed to protect and close 28 mm T‑slots on machine tables and fixtures, providing straightforward integration into common workshop setups Aluminium profile, corrosion-resistant finish Fits 28 mm T‑slot systems 1,000 mm length, easy to trim with fine saw Robust aluminium construction that protects machine surfaces and reduces maintenance The aluminium profile offers a resilient barrier against chips, coolant and dust, reducing the risk of component damage and prolonging accessory life. Installed over a T‑slot, the strip shields the slot base and simplifies cleaning, which in turn helps maintain machine accuracy and reduces downtime. The lightweight metal combines strength with ease of handling, so replacement or adjustment during routine maintenance remains efficient. Emphasis on durable materials delivers a measurable reduction in abrasive wear on adjacent components. Exact compatibility and simple modification speed up installation and adaptation Designed for a 28 mm T‑slot and supplied at 1,000 mm length, the profile aligns with standard slot geometries to ensure a flush fit and stable coverage. The design permits cut-to-length trimming using a fine saw blade, which prevents burr formation and enables precise on-site adaptation to non‑standard table sizes. Explaining T‑slots briefly: they are recessed tracks used for fixturing and clamping; matching their width is essential for a secure finish. This compatibility avoids the need for bespoke covers and accelerates assembly. Practical workshop advantages and reliable supply from a precision partner As a straightforward cover strip, this component reduces cleaning intervals and protects clamping elements, delivering pragmatic productivity gains per operation. The Cover Strip Nr. 6486 is suitable for general workshop tables, fixtures and jigs where 28 mm T‑slots are present. Sourcing through Metav ensures a quality filter for European customers and dependable logistics from Emmerich, backed by a broad product range and longstanding industry experience. For projects demanding consistent supply and traceable quality, this aluminium cover strip supports efficient workshop workflows. Contact Metav Werkzeuge today for detailed compatibility advice on the AMF Cover Strip Nr. 6486 and to confirm delivery options from Emmerich; our consultants will assist with technical queries and ordering. Product details Article number: 4123530280NW Type: Nr. 6486 Label: Abdeckl.Nr.6486 28 mmx1000mm z.T-Nut AMF Manufacturer: AMF Product type: Cover strip Packaging unit: 1 Specifications T‑slot width: 28 mm Length: 1,000 mm Features Material: aluminium profile Suitable for T‑slot applications Can be cut to required length with a fine saw blade FAQ Which T‑slot size is supported by this cover strip? The cover strip is designed for a 28 mm T‑slot and provides a flush protective surface when installed on matching slots. Can the strip be shortened to fit a specific table length? Yes, the aluminium profile can be trimmed to length using a fine saw blade to achieve a precise cut with minimal burrs. What material is the cover strip made from and why does it matter? The profile is made from aluminium, offering a balance of lightness and durability that protects slot interiors while being easy to handle. Where is this component typically used in the workshop? Common applications include machine tables, fixtures and jigs with 28 mm T‑slots, where it prevents contamination and eases maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Clamping Wedge T-Slot 12/14/16mm For M12 M14 DIN 6314 - AMF
Take advantage of a universal T‑slot fit, proven conformity to DIN 6314 and a compact 100 mm length that together deliver reliable fixture control and fast set‑ups — order directly via Metav Werkzeuge or consult our specialists for tailored advice. T‑slot clamping bar DIN 6314 (T‑nut 12/14/16) – 100 mm, AMF T‑slot clamping bar DIN 6314 (T‑nut 12 + 14 + 16) for secure fixturing in machine tables and modular clamping systems. Universal fit for T‑nut 12 + 14 + 16 Durable 100 mm length for secure clamping Works with M12 and M14 threads Conforms to DIN 6314 standard Consistent clamping performance for production workflows The T‑slot design, specified to DIN 6314, provides a standardised interface that simplifies fixture planning and reduces compatibility checks across machines. By using a component with a universal fit to common T‑nut sizes, production planners benefit from fewer variant parts and faster machine changeovers. The standard conformity also supports predictable mechanical behaviour under load, which helps maintain component tolerances and reduces rework rates. This rational performance argument ensures predictable throughput and supports long‑term process reliability. Thread compatibility that shortens set‑up time Designed to accept common metric threads, the clamping bar works with M12 and M14 fixing hardware, enabling straightforward integration into existing clamping assemblies. The clear specification of compatible threads reduces selection errors during procurement and assembly, translating into faster set‑ups and lower downtime. Where fixture repeatability matters, the defined thread compatibility supports consistent torque application and secure clamping, reducing slippage and the need for frequent retorquing. Compact length for accurate positioning and space‑efficient fixtures With a 100 mm total length, this clamping element offers a compact footprint that assists in dense fixture layouts and precise positioning of workpieces. The shorter profile allows for closer proximity to cutting zones when space constraints demand it, while still delivering the clamping force required for stable machining. For workshops that balance flexibility with precision, the compact design enables versatile fixturing without sacrificing rigidity — a practical advantage for both prototypes and small‑batch production. Streamlined sourcing and dependable supply from Metav Choosing a standardised clamping component from a trusted supplier reduces procurement complexity. Metav’s position as a precision partner means access to a broad range of compatible fixturing products and expert advice when configuring a clamping concept. The combination of technical clarity and reliable distribution minimises lead times and supports continuous production. Confidence in supply and documentation contributes to better planning and fewer interruptions on the shop floor, reinforcing both operational and reputational reliability. Select this AMF T‑slot clamping bar for dependable fixturing and contact Metav Werkzeuge for purchasing support or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833003NW UID: 4000833003NW Label: Spanneisen DIN 6314 f.T‑Nut 12+14+16mm L.100mm AMF Norm: DIN 6314 Product type: Spanneisen (clamping bar) Brand: AMF Facts Width: 14 mm Total length: 100 mm T‑nut compatibility: 12 + 14 + 16 Packaging unit: 1 Special features Suitable for: M12, M14 Axite enrichment: Addition: A: 20; B2: 40; B3: 14; E1: 21; E2: 40 FAQ What T‑slot sizes does the clamping bar support? The clamping bar is compatible with T‑nut sizes 12, 14 and 16, ensuring flexible use across standard machine tables. Which thread sizes can be used with this clamping element? This clamping element is suitable for M12 and M14 fixings; selecting the matching thread avoids installation errors and maintains clamp integrity. Does the product comply with an industrial standard? Yes, the T‑slot clamping bar conforms to DIN 6314, providing a recognised standard for T‑slot fixturing components. Is the 100 mm length suitable for tight fixture arrangements? The 100 mm total length offers a compact solution for space‑constrained setups while preserving the clamping stability required for precision machining. What information is given by the axite enrichment values? The axite enrichment entries describe the specified additional parameters for this clamping bar used in detailed fixture planning and inventory classification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Fork Clamp Bar Slot 11mm For M10 Clamp Screw DIN 6315B - AMF
Benefit from standard-compliant clamping and precise slot sizing: the DIN 6315B conformity combined with an 11 mm slot and M10 compatibility ensures secure, repeatable clamping in compact fixtures. Order the AMF fork clamping bar directly via Metav Werkzeuge or ask our consultants if needed. AMF fork clamping bar DIN 6315B — 11 mm slot, 100 mm length AMF fork clamping bar DIN 6315B is a fork-style clamping element designed for fixture applications where standardised dimensions and M10 screw compatibility are required. DIN 6315B standardised fork clamp 11 mm slot width for precise seating 100 mm overall length for compact fixtures Compatible with M10 clamping screws Reliable, standardised clamping for repeatable setups Compliance with DIN 6315B provides a defined reference for repeatable clamping operations, reducing setup variability on the shop floor. The standardised geometry simplifies interchangeability within modular fixture systems, so changes to jigs or workholding fixtures do not require bespoke adjustments. Emphasis on precision benefits production runs that demand consistent part location and repeatability. Space-saving fork design for flexible fixture layouts The fork configuration and 100 mm overall length make the component suitable for tight fixture envelopes and nested clamping arrangements. The compact form factor helps to optimise clamping density without sacrificing access for tightening tools. In practice, a shorter clamp length can shorten cycle times by easing operator handling and enabling closer workpiece placement on the table. Clear compatibility with M10 clamping systems A 11 mm slot width is sized to accept common clamping interfaces and to align accurately with M10 clamping screws. For planners and purchasers, this means straightforward integration into existing M10-based clamping meshes and minimal additional procurement of adaptors. The defined slot dimension also aids in achieving a secure seating that supports consistent clamping force transmission. Integrates smoothly into industrial workflows Designed for use in industrial workholding, the fork clamping element supports quick retrofitting into existing fixtures and modular tooling systems. The standardised dimensions reduce engineering time for new fixtures and lower the risk of assembly errors in the jig build phase. Reliability in fixture elements contributes directly to overall process efficiency and fewer stoppages during production. For secure, standard-compliant clamping choose the AMF fork clamping bar and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833022NW Product type: Fork clamping bar Standard: DIN 6315B Brand: AMF Label: Gabelspanneisen DIN 6315B Schlitz-B.11mm L.100mm f.Spannschraube M10 AMF Facts Slot width: 11 mm Overall length: 100 mm Clamping screw size: M10 Pack unit: 1 Axite enrichment: A: 20; B2: 31; B3: 10; B4: 5 Special features Fork design (Gabelausführung) Standardised dimensions for modular fixtures Compatibility with M10 clamping systems FAQ What slot width does the fork clamping bar have? The fork clamping bar features an 11 mm slot width, suitable for precise seating in modular fixtures. Which clamping screw size is compatible with this item? Compatibility is specified for M10 clamping screws, enabling integration with common M10-based systems. Is this clamp manufactured to a recognised standard? Yes, the component conforms to DIN 6315B, ensuring consistent dimensions for repeatable setups. What is the overall length of the clamp? The overall length is 100 mm, designed for compact fixture arrangements and dense workholding layouts. Can the clamp be used in existing modular fixture systems? The DIN 6315B geometry and M10 compatibility allow straightforward integration into existing modular fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Parallel Gauge Set Precision Pair Ground, Hardened, 20 Pairs, IT5 ±0.01mm - AMF
Secure consistent assembly and fixturing with a set engineered for exact stacking and minimal variation; the hardened, pairwise plan-parallel plates offer ±0.01 mm height accuracy and enable quick, reliable shimming in 1 mm increments — order through Metav Werkzeuge or consult the advisers for specification matching. AMF Parallel shim set No. 6348P – 100 mm, pairwise precision shims the AMF Parallel shim set No. 6348P is a precision shimming solution for accurate height adjustment and toolbox-ready fixture alignment in workshop and production environments Pairwise plan-parallel, finely ground Case-hardened for long service life Height tolerance ±0.01 mm (IT5) Stackable in 1 mm increments Faster, more reliable setup through precision shimming The set provides 20 pairs of 100 mm shims that are pairwise plan-parallel and finely ground, which makes them ideal for accurate machine set-up and repeatable fixturing. Because each pair is matched and case-hardened, the risk of deformation under clamp load is reduced, preserving alignment and minimising rework. The combination of matched pairs and a clear stacking system cuts adjustment time, translating into measurable productivity improvements on assembly lines and jigs. Measurable accuracy that supports quality assurance Manufactured to tight tolerances with a pair tolerance tp in the height IT5 and nominal height tolerance ±0.01 mm, the plates enable precise compensation of misalignment where micron-level control matters. Compliance with DIN ISO 2768 m for the remaining dimensions ensures predictable integration with existing tooling. For tasks requiring reproducible gap control or calibrated reference heights, these shims offer a technical basis for traceable processes and lower scrap rates. Durable design tailored for industrial handling and storage Delivered as a comprehensive set, the shims are optimised for repeated use: hardened surfaces resist wear, while the fine grind maintains planarity under load. Sets are arranged to allow 1 mm stacking increments, simplifying the selection of the correct build-up without trial-and-error. The format supports both precision toolrooms and busy production bays where robust, easy-to-identify shimming solutions are required. For precision shimming from AMF, contact Metav Werkzeuge in Emmerich for expert advice and fast supply — Metav’s team can confirm compatibility with specific fixtures and ordering options Technical Data Article number: 4123321018NW Type: Nr. 6348P - 100 Label: Parallelunterlagensatz Nr.6348P Inh.20 PA Gr.100 Präzision L.100mm AMF Manufacturer: AMF Product type: Parallel shim set Content: 20 pairs Facts Length: 100 mm Quantity: 20 pairs Pair tolerance: tp in height IT5 Nominal height tolerance: ±0.01 mm Stacking increments: 1 mm Special features Pairwise plan-parallel, finely ground Case-hardened for wear resistance Sets provide a range with 1 mm steps Remaining dimensions to DIN ISO 2768 m FAQ What materials are these shims suitable for in fixture work? The AMF parallel shim set No. 6348P is a general-purpose shimming solution intended for steel and common fixture materials; material compatibility depends on application loading and environment, with the hardened finish providing broad suitability. How precise is the height control when stacking plates from this set? Stacking plates from the set yields step-controlled height adjustments in 1 mm increments with a nominal height tolerance of ±0.01 mm, allowing precise and repeatable build-ups. Are the shims matched within pairs for planarity? Yes, each pair is matched and plan-parallel, finely ground, ensuring consistent contact surfaces and minimised variation when used under clamping pressure. Can these shims be used in calibrated measurement setups? The set’s tight height tolerance and pairwise matching support use in setups requiring repeatable reference heights; however, final suitability depends on the specific metrology chain and requirements. What is the product reference for ordering or specification checks? Refer to SKU 4123321018NW and type Nr. 6348P - 100 when specifying the AMF parallel shim set for procurement or technical verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stud Bolt M10 Heat Treated 10.9, DIN 6379 - AMF
Benefit from a combination of standard compliance, high tensile strength and precise dimensions for reliable mechanical joins. The AMF stud bolt delivers consistent performance in machinery and structural assemblies; order directly via Metav Werkzeuge or consult our advisors for specification matching. AMF stud bolt DIN 6379 — M10 x 100 mm, strength class 10.9 The AMF stud bolt DIN 6379 is a high-strength fastening element designed for secure machine and structural connections where standard conformity and consistent thread engagement are required. DIN 6379 standard compliance Heat-treated to strength class 10.9 Metric thread M10 for standard fittings Secure connections through standardised strength The stud is manufactured to meet DIN 6379, guaranteeing compatibility with common industrial fittings and replacement parts. Its 10.9 heat-treated specification provides a high tensile strength that reduces the risk of fastener failure under load, delivering measurable reliability for bolted joints. This specification translates into fewer unscheduled maintenance intervals and longer service life for assemblies, which supports predictable production planning and lowers lifecycle disruption. Precision dimensions for consistent assembly With a defined M10 thread and an overall length of 100 mm, the fastener ensures predictable thread engagement and clamping behaviour. The measured width across tool flats of 13 mm enables standard spanner use and repeatable torque application. Consistent dimensions simplify assembly processes and reduce variation in clamping forces, which is particularly beneficial in repetitive production environments and when interchangeability with DIN-compliant components is required. Durable performance and suitable applications Heat treatment to class 10.9 enhances both tensile and yield characteristics while preserving thread geometry for reliable torque transmission. The component is ideal for mechanical assemblies, fixtures and machine construction where a strong, corrosion-resistant coating is not specified in the data. When used in appropriately matched materials and joint designs, the bolt supports durable clamping and stable joint stiffness, contributing to overall system longevity without frequent replacement. For secure, standards-compliant fastenings, request the AMF stud bolt via Metav Werkzeuge — technical advice and order support are available from Metav Werkzeuge GmbH in Emmerich; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: 4000833253NW Brand: AMF Product type: Stud bolt Measurements Thread: M10 Overall length: 100 mm Width across flats / tool size: 13 mm Additional dimension: b: 75 Features Standard: DIN 6379 Strength class: 10.9 (heat-treated) Packaging unit: 1 FAQ What load capacity does the stud bolt offer? The AMF stud bolt specified to strength class 10.9 provides high tensile and yield values suitable for demanding mechanical joints; exact load ratings depend on joint design and mating materials. Is this fastener compatible with standard M10 nuts and fittings? Yes, the metric M10 thread and adherence to DIN 6379 ensure compatibility with standard M10 nuts and DIN-compliant components. Can the stud bolt be used in structural machine assemblies? The stud bolt is intended for machine and structural connections where 10.9 strength and standardised dimensions are required; verify joint calculations for the specific application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stud Bolt M12x100 Hardened 10.9, DIN 6379 - AMF
Take advantage of a standardised, high‑strength fastening solution with predictable dimensions and reliable clamping force; the combination of DIN 6379 compliance, M12 threading and property class 10.9 hardness supports secure assemblies and consistent installation. Order directly via Metav Werkzeuge or consult our specialists for application advice. AMF Stud Bolt DIN 6379 M12 x 100 mm, Grade 10.9 The AMF Stud Bolt DIN 6379 M12 x 100 mm is a hardened, threaded stud designed for standardised industrial and mechanical fastening where consistent geometry and elevated strength are required. DIN 6379 standardised geometry M12 x 100 mm threaded stud Hardened to property class 10.9 Precision-manufactured by AMF Consistent strength and standard conformity for dependable assemblies Compliance with DIN 6379 ensures a standardised stud geometry that simplifies component selection and guarantees interchangeability across fixtures and mating parts. The M12 thread and 100 mm overall length provide a common, versatile size for through-bolting and clamping arrangements, while the property class 10.9 rating indicates a tempered steel grade engineered for high tensile performance. This combination reduces uncertainty during procurement and supports repeatable torque and preload behaviour in production and maintenance settings. Streamlined installation and inventory advantages A threaded stud format reduces the need for multiple bolt variants and enables flexible assembly strategies such as using nuts and washers to adapt to different joint designs. The standard M12 thread profile simplifies matching with commonly stocked nuts and threaded components, improving process efficiency and minimising downtime caused by part mismatch. Precision manufacture ensures consistent thread fit and engagement, which in turn supports accurate torque application and predictable clamping results without unnecessary trial and error. Robust construction with practical handling benefits The stud is quenched and tempered to achieve the 10.9 property class, delivering enhanced yield and tensile strength compared with lower grades. This makes it suitable for demanding mechanical connections where higher clamping forces are required. As a component from AMF, the stud bolt is produced to industrial tolerances that favour long service life and reduced maintenance frequency. Its clear specification and uniform dimensions also aid quality control processes, allowing fast verification and fewer assembly errors. Secure robust, standard-compliant fastening with AMF’s Grade 10.9 stud — contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833260NW Label: Stiftschraube DIN6379 M12x100mm vergütet auf 10.9 AMF SKU: 4000833260NW Core dimensions Thread: M12 Overall length: 100 mm Width: 15 Packaging unit: 1 Materials & features Brand: AMF Standard: DIN 6379 Property class: 10.9 Finish: tempered (vergütet) Additional: Addition: b: 63 FAQ What does DIN 6379 mean for fit and interchangeability? DIN 6379 defines the stud geometry and thread form so the stud offers predictable fitment and interchangeability with compatible components adhering to the same standard. Is this stud suitable for high‑load applications? Yes, the stud is rated property class 10.9, which denotes a quenched and tempered steel grade designed for elevated tensile and yield strength compared with lower classes. What are the exact thread and length specifications? The stud features an M12 thread with an overall length of 100 mm, as specified on the article label and SKU 4000833260NW. How is the surface treated or finished? The product is supplied tempered to achieve the 10.9 classification; any further surface treatment details are not specified in the provided data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stud Screw DIN 6379 Heat Treated 10.9, M8 Thread - AMF
Combining high tensile strength with standard conformity and a compact M8×100 mm format ensures dependable fixation and reduced maintenance in serial production; order the component directly via Metav Werkzeuge or ask the consultants for application-specific advice. Stud screw DIN 6379 M8×100 mm — hardened property class 10.9 by AMF The Stud screw DIN 6379 M8×100 mm is a hardened industrial fastener manufactured to DIN 6379 for reliable axial locating and secure mechanical joints in machinery and assemblies. Hardened to property class 10.9 Conforms to DIN 6379 standard M8 thread, 100 mm overall length Industrial-grade axial fastening Proven strength for load-bearing fastenings The stud is supplied hardened to property class 10.9, delivering elevated tensile strength and improved yield for demanding applications. This higher material grade reduces the risk of elongation under preload and improves joint integrity in repetitive load cycles. By specifying a DIN 6379 component, the fastener meets defined geometric and mechanical tolerances, which simplifies quality control and inspection procedures on the shop floor. The combination of heat treatment and precise thread geometry supports predictable clamping behaviour and longer service intervals. Standard format for straightforward assembly and interchangeability Engineered with an M8 thread and an overall length of 100 mm, this fastener integrates into common assembly patterns and replacement stocks without additional adaptation. The standardized dimensions facilitate rapid selection from inventory and reduce setup time on production lines. Where traceability and conformity matter, the DIN reference provides clear criteria for procurement and incoming inspection. The fastener’s 11 mm width and the specified addition parameter help determine seating and engagement depths during installation, enabling consistent torque application and reliable preload. Practical supply and compatibility advantages for workshops Selection of a standardised, hardened stud from a recognised maker such as AMF minimises downtime through predictable performance and simplified maintenance planning. The product’s packaging unit supports single-piece usage and straightforward stock keeping for spare-part management. Choosing standardised components reduces the number of special parts in a facility, streamlines ordering and ensures compatibility across similar assemblies. The result is lower operational complexity and improved process reliability for production and service operations. Select AMF quality for critical joints — contact Metav Werkzeuge for direct supply and expert specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833248NW UID: 4000833248NW Standard: DIN 6379 Label: Stiftschraube DIN6379 M8x100mm vergütet auf 10.9 AMF Manufacturer: AMF Core technical data Thread: M8 Overall length: 100 mm Width: 11 mm Packaging unit: 1 Materials & special features Hardened to property class 10.9 Conforms to DIN 6379 standard Product type: stud screw Axite enrichment: Addition: b: 63 FAQ What mechanical class does this stud screw have? The stud screw is hardened to property class 10.9, providing enhanced tensile strength suitable for many industrial joints. Is the fastener compliant with recognised standards? Yes, the component is produced to DIN 6379, ensuring standard geometry and mechanical tolerances for interchangeability. Which thread and length are specified? The fastener uses an M8 thread and an overall length of 100 mm, a common format for industrial assemblies. Can this stud be used as a direct replacement in existing DIN-based assemblies? Where assemblies expect DIN 6379 geometry and a 10.9 strength class, this AMF stud screw is designed for direct compatibility. How is the product supplied for inventory control? The item is supplied with a packaging unit of 1, simplifying spare-part stocking and single-part usage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm T-Slot Bolt 14mm T-Slot M12 Thread Grade 10.9 With Nut And Washer - AMF
Take advantage of the combination of M12 thread, 100 mm overall length and Grade 10.9 strength for reliable fixture clamping; this solution fits standard 14 mm T-slots and comes with a nut and washer from AMF. Order the AMF T-slot bolt directly via Metav Werkzeuge or ask our consultants if needed. AMF T-slot bolt DIN 787, M12 × 100 mm, Grade 10.9 — T-slot bolt for 14 mm T-slots The AMF T-slot bolt secures workpieces and clamping elements in 14 mm T-slots on machine tables and fixtures for industrial workholding. High-strength Grade 10.9 steel Thread size M12 for robust clamping Fits 14 mm T-slot profiles Includes nut and washer AMF Secure clamping designed for machine tables The bolt is produced to DIN 787, the recognised standard for T-slot fasteners, ensuring consistent geometry for safe seating in a 14 mm T-slot. As a dedicated T-slot bolt, it converts axial tightening into secure lateral clamping, reducing torsion and movement of fixturing components. This characteristic provides a measurable improvement in setup repeatability and reduces time spent on re-adjustment during batch production runs, supporting a smoother workflow on milling tables and drill presses. High tensile strength for demanding applications Manufactured in Grade 10.9, the fastener offers elevated tensile and yield strength compared with lower grades, making it suitable for heavier clamping and frequent tightening cycles. The M12 thread provides a balance between load-bearing capacity and compatibility with standard clamping hardware, enabling firm torque transfer without excessive thread wear. For operations where reliability under repeated stress is required, the higher strength grade translates into longer service life and reduced likelihood of fastener failure. Practical dimensions and included hardware for immediate use With an overall length of 100 mm, the bolt covers a wide range of fixture thicknesses while maintaining adequate thread engagement for safe clamping. The delivery includes a nut and washer from AMF, packaged as a complete fastening set ready for installation. Additional dimensional references are provided as additive values: A: 13.7 mm; B: 65 mm; E: 22 mm; K: 8 mm — these figures assist engineers during fixture design and when verifying clearances on bespoke setups. Versatile in workshop applications and reliable supply This fastening solution is well suited to jigs, fixtures, modular fixturing systems and general machine table accessories where a standard 14 mm T-slot is present. The standardised form factor simplifies inventory management and replacement planning. Combined with Metav’s logistics and quality assurance, the risk of delayed replacement or inconsistent parts is reduced, supporting uninterrupted production and dependable workshop performance. For secure, standard-compliant clamping with AMF Grade 10.9 reliability, contact Metav Werkzeuge for tailored advice and rapid supply direct from Emmerich. Technical data SKU: 4000833319NW UID: 4000833319NW Product type: T-slot bolt Standard: DIN 787 Manufacturer: AMF Packaging unit: 1 Includes: nut and washer AMF Facts Thread: M12 Overall length: 100 mm T-slot width compatibility: 14 mm Packaging unit: 1 Special features Grade 10.9 high-strength fastener Additions: A 13.7; B 65; E 22; K 8 Delivered with nut and washer (AMF) Conforms to DIN 787 FAQ Which T-slot size does this bolt fit? The bolt is designed for a 14 mm T-slot and seats to the DIN 787 profile dimensions for a secure fit. Is the fastener suitable for heavy-duty clamping? Yes. The combination of Grade 10.9 and an M12 thread makes the AMF T-slot bolt appropriate for demanding clamping tasks. What is included in the delivery? Delivery comprises the T-slot bolt together with a nut and washer from AMF, provided as a ready-to-use set. How long is the bolt and what clearance does it provide? Overall length is 100 mm; additional dimensional additions are A: 13.7 mm, B: 65 mm, E: 22 mm and K: 8 mm to support clearance and design checks. Which standard does the fastener comply with? The component is manufactured to DIN 787, ensuring standardised geometry for machine-table applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm T-Slot Bolt DIN 787 18mm T-Slot M16 Length 100mm Grade 8.8 - AMF
Robust clamping and dependable tensile strength from the M16 thread and property class 8.8 enable secure fixing in 18 mm T‑slots; the 100 mm overall length provides deep engagement for stable assemblies. Order the component directly via Metav Werkzeuge or consult our specialists for tailored fixture advice. T-slot bolt DIN 787 — T-slot 18 mm, M16, 100 mm — AMF A T-slot bolt DIN 787 T-slot 18 mm M16 L100 mm property class 8.8 AMF engineered for secure workholding in machine tables, modular fixturing and industrial clamping systems. DIN 787 standard for reliable fit 18 mm T-slot compatibility M16 metric thread, high clamping force 100 mm overall length for deep engagement Property class 8.8 steel for strength Secure fastening for industrial fixturing The DIN 787 compliance ensures the bolt engages predictably with compatible T‑slots, reducing play and alignment errors during assembly. With an M16 thread, the fastener delivers considerable clamping capacity while remaining compatible with standard metric nuts and clamping elements. This combination of standard conformity and thread size translates into a measurable improvement in fixture stability, particularly where repeatable positioning and vibration resistance are required. For production environments, the result is fewer re‑set operations and a more reliable machining process. Practical dimensions for predictable assembly Precise dimensions matter when assembling clamping systems; the 100 mm overall length allows deeper engagement into fixtures and supports thicker workpieces or multi‑plate arrangements. The supplied dimensional data — A: 17.7 mm; B: 65 mm; E: 28 mm; K: 10 mm — give clear reference points for planning clearances and reach. These values support both quick compatibility checks and CAD validation, making it straightforward to confirm that the fastener meets the spatial requirements of a given setup before procurement or installation. Strength and application suitability Rated property class 8.8, this fastener offers a robust balance between tensile strength and ductility suitable for many workshop and light industrial applications. The specification favours secure clamping in general machining, assembly jigs and fixture plates without over‑engineering the solution. Where higher hardness or specialist coatings are required, consider specifying those requirements separately; for standard mechanical clamping tasks, the combination of property class 8.8 and metric threading provides a dependable foundation for everyday use. Integration into existing systems and procurement ease As a standard T‑slot component, the bolt integrates seamlessly into modular clamping systems and machine tables with an 18 mm T‑slot. Its compatibility with commonly available clamping elements simplifies sourcing and reduces the number of bespoke parts in a workshop. For purchasers seeking consolidated supply, Metav’s offering channels high availability and transparent logistics from Emmerich, helping to keep assembly lines moving without prolonged waiting times. Technical drawings and fitting advice are available on request to support correct selection for specific fixtures. For reliable clamping solutions from AMF, contact Metav Werkzeuge in Emmerich for personalised technical advice and fast delivery to your workshop at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000603229NW Product: T-slot bolt DIN 787 Manufacturer: AMF Product type: T-slot bolt Facts T-slot size: 18 mm Thread: M16 Overall length: 100 mm Addition dimensions: A: 17.7; B: 65; E: 28; K: 10 Standard: DIN 787 Packaging unit: 1 Special features Property class: 8.8 Suitable for machine tables and modular fixturing Ideal for repeatable clamping applications FAQ Which T-slot width is this bolt compatible with? The bolt is designed for an 18 mm T‑slot and is suitable for standard machine tables and clamping rails specified to that slot width; refer to SKU 4000603229NW for exact fit. Does the fastener meet recognised standards? Yes, the component conforms to DIN 787, ensuring consistent dimensions and engagement behaviour for compatible T‑slot systems. Is this bolt suitable for heavy‑duty clamping? With property class 8.8, the bolt provides robust tensile strength for many heavy‑duty and repetitive clamping tasks; actual suitability depends on specific load and safety factors in the assembly. Are additional components required for assembly? Depending on the clamping concept, the T‑slot bolt can be used with standard nuts and washers or with dedicated clamping elements; the M16 thread allows use of common metric accessories. How to choose the correct length for a fixture? Consider total stack height and required thread engagement; the 100 mm overall length of this fastener is suited to thicker workpiece stacks and deeper fixture plates—check the A/B/E/K dimensions when planning mounting clearances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Threaded Stud M16 Heat-Treated 8.8, DIN 6379 - AMF
Robust fastening reliability with DIN 6379 compliance and heat-treated strength class 8.8, combined with the compact M16 × 100 mm format for straightforward integration into assembly workflows. Order the DIN 6379 threaded stud M16 x 100 mm from AMF directly via Metav Werkzeuge or ask our consultants if needed. AMF DIN 6379 threaded stud M16 x 100 mm, tempered to 8.8 AMF DIN 6379 threaded stud M16 x 100 mm is a high-strength fastening element designed for mechanical assemblies and maintenance tasks where standardised threads and predictable clamping behaviour are required. Heat-treated to strength class 8.8 DIN 6379 compliant stud design Thread size M16 × 100 mm Wrench size 19 mm for secure tightening Consistent clamping force for reliable joints This threaded stud follows DIN 6379, ensuring dimensional conformity and interchangeability in industrial settings. The M16 x 100 mm specification gives a clear, verifiable basis for component selection, while the tempering to 8.8 provides enhanced tensile and yield characteristics compared with non-hardened fasteners. For workshops and production environments this translates into fewer retentions and predictable joint integrity under standard operating loads. Practical benefits during installation and maintenance Designed for efficient assembly, the stud’s standard M16 thread mates with commonly available hardware, and the wrench size 19 mm allows secure torque application using standard tools. The stud format reduces installation time in repeat-fit operations and supports straightforward replacement procedures in maintenance cycles. Minimal handling and clear specifications contribute to faster throughput on the shop floor and reduced downtime between changeovers. Traceability, packaging and supply advantages Delivered in packaging unit 1 and listed under SKU 4000833273NW, the part supports inventory control and traceability for repair or production orders. The AMF branded component benefits from production controls that align with industrial expectations for repeatability and quality. Sourcing via Metav Werkzeuge further provides access to centralised procurement, detailed product listings and a dependable logistics hub for European deliveries. For dependable mechanical fastening with AMF’s DIN 6379 stud (M16 x 100 mm, strength class 8.8), contact Metav Werkzeuge to secure supply or request technical clarification at info@metav-werkzeuge.com Technical data Article number: 4000833273NW Product type: threaded stud Standard: DIN 6379 Manufacturer: AMF Facts Thread: M16 Overall length: 100 mm Wrench size: 19 mm Packaging unit: 1 Special features Tempered to strength class 8.8 DIN 6379 compliant Brand: AMF Addition: b: 63 FAQ What standard does this stud meet? The stud adheres to DIN 6379, ensuring dimensional conformity and interchangeability for the AMF DIN 6379 threaded stud M16 x 100 mm (SKU 4000833273NW). What does strength class 8.8 indicate for use? Strength class 8.8 denotes a heat-treated, higher-strength fastener suitable for applications that require improved clamping force and reliable joint performance compared with untreated screws. Is the M16 thread compatible with standard nuts and components? Yes, the M16 thread is a standard metric size and is compatible with commonly available M16 nuts and mating parts when using the AMF threaded stud. How is the stud supplied for inventory and traceability? The item is supplied in packaging unit 1 and listed under SKU 4000833273NW, supporting straightforward stock management and order tracking. Which applications commonly use this type of stud? This stud format is typically used in mechanical engineering, maintenance and assembly operations where standardised fasteners and dependable clamping behaviour are required, such as machine assembly and fixture construction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100–140mm Screw Vice Nr.6400 Flat Support H.100–140mm, Load Capacity 120 kg - AMF
Benefit from a robust clamping solution that combines a high maximum load capacity with an adjustable height range, ensuring secure setups and shorter preparation times; order directly via Metav Werkzeuge or consult our specialists for application advice. Screw Vice Nr. 6400 - 140 with flat support, adjustable height — AMF The Screw Vice Nr. 6400 - 140 is a heavy-duty clamping device for workshop and production use, offering a flat support and a height adjustment range for precise positioning and versatile fixturing. Adjustable height 100–140 mm Jaw width 140 mm Maximum load capacity 120 Flat support for stable clamping Faster set-up through adjustable height and reliable clamping The vice delivers practical efficiency: an adjustable height range of 100–140 mm reduces reconfiguration time when switching workpieces, while the maximum load capacity of 120 provides consistent holding power for demanding tasks. The combination of height adjustability and solid clamping performance translates directly into increased throughput and fewer interruptions during machining or light assembly operations. Clear mechanical interface for maintenance and integration The vice is built around a defined spindle geometry — spindle thread 40 x 7 — and matching interface diameters D1 / D2 = 68 mm, which simplify replacement parts selection and machine-table integration. These measurable values enable planners and maintenance technicians to assess compatibility with existing fixtures and to predict service intervals, supporting a predictable production rhythm without guesswork. Stable support and precise positioning for repeatable results A flat support provides a consistent contact surface for components, improving repeatability across batches. The jaw width 140 mm offers a balance between grip area and accessibility, making the unit suitable for clamping a wide variety of parts. The vice’s design focuses on firm seating and minimal movement under load, which reduces rework and lowers scrap rates in repetitive workflows. Robust, workshop-friendly design for everyday use This clamping device is designed for practical workshop conditions: straightforward geometry, measurable connection points and simple mechanical function mean rapid familiarisation for operators and reduced training time. The construction supports routine tasks at the bench or in small-series production, contributing to a safer, more dependable workplace atmosphere while preserving machining accuracy. For expert guidance on application or to secure the AMF screw vice with 100–140 mm height adjustment, contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833116NW Type: Nr. 6400 - 140 Product name: Schraubbock Nr.6400 Gr.140 m.flacher Auflage H.100-140mm AMF Brand: AMF Packaging unit: 1 Facts Maximum load capacity: 120 Height range: 100–140 mm TR: 40 x 7 D1: 68 mm D2: 68 mm Size: 140 Special features Flat support Adjustable height Jaw width 140 mm Bench-mountable clamping device FAQ What is the adjustable height range of the vice? The adjustable height range is 100–140 mm for the Screw Vice Nr. 6400 - 140 (AMF, SKU 4000833116NW). Which spindle specification does the vice use? The vice is specified with a spindle thread of 40 x 7, and interface diameters D1 and D2 are 68 mm. What does the maximum load capacity value represent? The listed maximum load capacity is 120 as provided in the product data for the AMF screw vice; use this figure when comparing clamping demands and fixture limits. Is the vice suitable for bench mounting in a production environment? Yes, the vice’s flat support and bench-compatible geometry make it suitable for workshop benches and small-series production set-ups. How wide are the jaws of the clamping device? The vice is provided in size 140, corresponding to a jaw width of 140 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Screwstock Adapter Insert Pin Ø12mm D:37mm - AMF
Take advantage of the combination of compact dimensions and precise fit to speed up clamping setups while keeping handling simple; order the AMF attachment via Metav Werkzeuge or consult our specialists for integration advice. Screw-vice attachment No. 6440 — insertion pin Ø 12 mm, head diameter D 37 mm (AMF) A Screw-vice attachment No. 6440 engineered for reliable clamping applications where a 12 mm insertion pin and a 37 mm seating diameter ensure a stable connection in confined workshop or industrial environments Screw-vice attachment No. 6440 by AMF Insertion pin Ø 12 mm for secure fit Head diameter D 37 mm for stable seating Compact height 10 mm for tight spaces Compact design that keeps setups efficient The compact footprint of this adapter delivers a practical advantage in dense fixtures and small vices. With a compact height 10 mm and a seating diameter of D 37 mm, the component reduces the overall stack height in multi-element clamping assemblies and minimises collision risk during machining or measuring operations. The small profile supports denser workholding layouts without sacrificing contact area, which helps maintain positional stability and repeatability when frequent part changes are required. This reduces setup time and supports a smoother production flow. Fast, precise engagement for repeatable clamping A defined insertion pin Ø 12 mm provides a clear mechanical interface for pin-and-socket systems: the pin locates the attachment, the seating diameter distributes contact forces and the result is a consistent, reproducible connection. For users who perform repetitive clamping tasks, this reduces variability between jobs and simplifies alignment. The plain mechanical function requires no auxiliary systems and explains why the adapter is well suited to applications where reliability and quick changeover are priorities. Practical benefits for workshop and industrial use The design focuses on straightforward functionality and ease of handling. The large seating diameter helps distribute clamping loads across a wider area, which improves stability under lateral forces during processing. As a dedicated clamping accessory from AMF, the adapter is intended to integrate into common workshop workflows and to provide a dependable mechanical interface for fixtures that accept a 12 mm locating pin. The result is a component that supports productivity through predictable behaviour and minimal adjustment. Simple care and clear specifications for planning With its unadorned mechanical design, the attachment requires only routine inspection and cleaning to remain serviceable. The clear dimensional data — insertion pin Ø 12 mm, D 37 mm, height 10 mm — allows planners and engineers to verify fit in CAD models and on setup drawings without ambiguity. When specifying tooling or documenting fixtures, these measurable values simplify procurement and quality control. The product label and type number make traceability straightforward for stock management and reordering. For precise clamping solutions, request the AMF Screw-vice attachment No. 6440 from Metav Werkzeuge — Metav’s Emmerich warehouse ensures reliable supply and specialist advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and ordering. Technical data Article number: 4000833135NW Type: No. 6440 Label: Schraubbockaufsatz Nr.6440 Einsteckzapfen-D.12mm KGL AD 37mm AMF Manufacturer: AMF Dimensions & core data Height: 10 mm Insertion pin diameter: 12 mm Head diameter D: 37 mm Packaging unit: 1 Features & application Product type: Screw-vice attachment Brand: AMF Application: Locating and clamping via insertion pin Suitable for compact clamping assemblies FAQ What are the key dimensions of the attachment? The main dimensions are height 10 mm, insertion pin Ø 12 mm and head diameter D 37 mm, as specified for the AMF Screw-vice attachment No. 6440. Which locating sockets is the adapter compatible with? The adapter is intended for sockets or fixtures that accept a 12 mm locating pin; compatibility depends on the receiving element accommodating an insertion pin Ø 12 mm and the seating diameter D 37 mm. How is the component installed in a clamping setup? Installation is by insertion of the pin into the matching locating bore or socket; the seating diameter provides lateral support for a stable connection. How many pieces are supplied per packaging unit? The packaging unit is 1, corresponding to article number 4000833135NW. Is the material or coating specified for this item? The dataset does not specify material or coating for the AMF Screw-vice attachment No. 6440 Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm T-Slot Nut DIN 508 8mm M6, Strength Class 10 - AMF
Benefit from standardised DIN 508 compatibility, a compact 8 mm T-slot fit and secure M6 threading for consistent clamping results; order directly via Metav Werkzeuge or consult our advisors for specification support. T-Nutenstein DIN 508 T-Nut 8mm M6 AMF — compact T-slot nut for standard clamping systems T-Nutenstein DIN 508 T-Nut 8mm M6 AMF is a standard-compliant T-slot fastening element for assembly and fixturing in machine tables and modular fixtures DIN 508 standardised design Compact 8 mm T-slot fit M6 internal thread for standard bolts Strength class 10 for reliable clamping Reliable standard fit for repeatable fixturing The T-Nutenstein DIN 508 T-Nut 8mm M6 AMF delivers a standardised interface via DIN 508, guaranteeing repeatable seating in 8 mm T-slot rails. The standard conformity ensures interchangeability across fixtures and tables that follow the same norm, which simplifies procurement and reduces assembly errors. The compact height 10 mm keeps the clamping envelope low, helping to avoid collisions in multi-level assemblies while providing sufficient material for thread engagement. This combination of size and standardisation aids planners and shop-floor staff in selecting compatible components without extensive measurement checks. High clamping reliability through defined strength and geometry Designed for dependable mechanical performance, the nut is specified with a strength class 10, indicating a high tensile capability for its category. The supplied axial values (A: 7.7, E: 13, K: 6) describe the critical seating and engagement dimensions that determine how the part sits and transfers load within a T-slot. These dimensional details assist engineers in verifying clamp geometry and calculating safe load paths in fixture design. Where predictable clamping behaviour is required, such clearly defined parameters reduce calculation overhead and support safe, auditable assembly practices. Practical compatibility and straightforward ordering The part accepts standard fastenings via the M6 thread and is intended for use in conventional T-slot systems with an 8 mm slot width. Supplied as packaging unit 1 and identifiable by SKU 4000833201NW, it is suitable for replacement stock or single-item assembly needs. The compact profile and standard thread make it simple to integrate into modular clamping setups, reducing the need for bespoke adaptors. For procurement and inventory management, the clear SKU and norm reference streamline ordering and ensure components arriving at the bench match design specifications. For specification guidance, order placement or to confirm fitment within a specific clamping system, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich. Technical data Article number: 4000833201NW UID: 4000833201NW Product type: T-slot nut Brand: AMF Dimensions & core data Height: 10 T-slot width: 8 Thread: M6 Standard: DIN 508 Packaging unit: 1 Special features Addition A: 7,7 Addition E: 13 Addition K: 6 Strength class: 10 FAQ What slot size does this T-slot nut fit? The nut is designed for an 8 mm T-slot and conforms to the DIN 508 specification for that slot width. Which thread size is provided on this part? This T-slot nut (AMF) features an M6 internal thread suitable for standard M6 bolts and screws. How is load capacity described for this component? Load-related capability is indicated by the strength class 10 and the axial dimensions (A: 7.7; E: 13; K: 6) which inform seating and load transfer. Can this item be used as a direct replacement in existing DIN 508 fixtures? Yes, the design follows DIN 508, making it suitable as a direct replacement where that norm is required. What is the ordering reference for this T-slot nut? Order or reference SKU 4000833201NW when requisitioning the AMF T-slot nut for procurement or stock purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm T-Slot Nut Nr. 510 Rhombic M8, Height 12mm - AMF
Take advantage of the M8 threaded connection, compact 12 mm height and rhombic profile for reliable fixture locating and uninterrupted production. Combine robust clamping performance with straightforward compatibility for 10 mm T-slots and order the component directly via Metav Werkzeuge or consult our advisors for specification support. T-slot nut No. 510 — 10 mm T-slot, M8 thread (AMF) T-slot nut No. 510 is a compact clamping element for securing workpieces and fixtures in 10 mm T-slots, offering a rhombic profile for positive locating in modular setups Fits 10 mm T-slots M8 internal thread Rhombic profile for positive locating High strength class 10 Secure, repeatable clamping for fixture workflows The rhombic T-slot nut provides a positive locating geometry that reduces lateral play and improves repeatability when securing clamps or tooling. With a 12 mm height and a designed fit for a 10 mm T-slot, the component delivers consistent seating in slot tracks, which minimises setup time and reduces the need for secondary alignment. This repeatability translates into fewer rejects and smoother machine operation during jigs and fixture changes. Simple integration with standard fixturing systems Compatibility with the widely used 10 mm T-slot combined with an M8 thread makes the part straightforward to incorporate into existing clamping systems and modular tables. The internal thread allows conventional bolts and studs to be used without special adapters, supporting fast assembly and disassembly. The clear mechanical interface supports efficient workflows and reduces the variety of fasteners required in the workshop. Robust performance under load and clear specification limits Specified with a strength class 10 rating and documented geometry parameters (A: 9.7; E: 15; K: 6), the nut is intended for demanding clamping applications where secure retention is essential. The rhombic form ensures torque is translated into axial holding force rather than slot damage, prolonging service life of both the nut and the slot. For shops aiming for predictable clamping behaviour, this combination of geometry and strength class supports a measurable improvement in operational reliability. For reliable fixturing choose the AMF No. 510 rhombic T-slot nut and contact Metav Werkzeuge for ordering and specification advice from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603182NW Type: No. 510 Product: T-slot nut Manufacturer: AMF Dimensions & core data Height: 12 mm T-slot width: 10 mm Thread: M8 Packaging unit: 1 A: 9.7; E: 15; K: 6; Strength class: 10 Designs & special features Rhombic profile for positive locating Intended for fixture and clamp mounting Compact form for minimal slot intrusion FAQ What T-slot width does the nut fit? The T-slot nut is designed for a 10 mm T-slot, matching standard 10 mm slot systems for modular tables and machine beds. Which thread size is provided on the component? The part features an M8 internal thread, allowing the use of common M8 bolts and studs for clamping and assembly. What is the height of the nut and why does it matter? The nut has a 12 mm height, which limits slot intrusion while providing sufficient engagement to transfer clamping forces securely. How does the rhombic profile improve clamping? The rhombic profile offers positive locating, reducing side play and ensuring torque is converted into axial clamping force rather than lateral movement. Is the strength rating specified for heavy-duty use? The component is documented with strength class 10 and geometry values (A: 9.7; E: 15; K: 6) to indicate suitability for demanding clamping applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm-40mm Clamping Wedge For T-Slot 12mm With M12x12x100 Clamp Screw, 14mm Width - AMF
Take advantage of precise, repeatable workholding with the AMF clamping element that combines 12 mm T‑slot compatibility and an adjustable clamping height of 10–40 mm for flexible fixture setups. Order directly via Metav Werkzeuge or request advice from our consultants for integration into existing clamping systems. AMF Clamping Element No. 6314V — T‑slot 12 mm, clamping height 10–40 mm AMF Clamping Element No. 6314V is a compact workholding component engineered for secure clamping in 12 mm T‑slot systems, suitable where height adjustability and robust fixation are required. T‑slot compatibility: 12 mm Adjustable clamping height 10–40 mm Supplied with M12 x 12 x 100 clamping screw Robust design for secure workholding Faster set‑ups with standard T‑slot compatibility The clamping element is designed specifically for 12 mm T‑slot rails, enabling rapid integration into common machine tables and fixture plates. Compatibility with this widely used slot size reduces the need for adapters and minimises machine downtime. The simple geometry and standardised interface support quick positioning and reliable repeatability, making the component well suited to batch production and frequent changeovers where efficient clamping is essential. Flexible clamping range to accommodate varied stock With an adjustable clamping height of 10–40 mm, the unit covers a broad range of workpiece thicknesses without additional spacers. The height range allows a single clamping element to be used across different jobs, simplifying tool inventory and reducing setup complexity. The clear mechanical range also allows planners to calculate clamp forces and overhang safely, providing more predictable results during milling, drilling or light finishing operations. Purposeful hardware for secure fixation The delivery includes a M12 x 12 x 100 clamping screw, matched to the component’s M12 thread and overall length, which ensures correct engagement and clamping stroke. The specified 100 mm total length is suitable for typical fixture stacks while the standard M12 thread guarantees compatibility with commonly stocked fasteners. This combination of thread size and screw length enables consistent clamp preload and reduces the risk of improper assembly in production environments. Practical advantages for workshop and production environments The compact form and a width of 14 mm contribute to space‑efficient clamping arrangements, allowing closer placement of multiple clamps where workpiece support is critical. The element’s straightforward design keeps maintenance simple and inspection quick, which supports continuous operation. For technical clarifications or dimension verification when integrating into existing jigs, Metav’s product specialists can provide detailed advice and measurements to assist with planning and procurement. Contact Metav Werkzeuge today for tailored advice on integrating the AMF clamping element into existing fixture systems and for ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833072NW Type: Nr. 6314V Product: Clamping element Brand: AMF Packaging unit: 1 Facts T‑slot: 12 mm Clamping height: 10–40 mm Width: 14 mm Thread: M12 Overall length: 100 mm Special features Includes clamping screw M12 x 12 x 100 Compact form for close clamp spacing Suitable for standard T‑slot fixture tables Robust design for secure workholding FAQ Which T‑slot size does the clamp fit? The clamping element is designed for a 12 mm T‑slot, matching common machine table standards. What is the adjustable clamping height range? The unit provides a clamping height of 10–40 mm, allowing use across a wide range of workpiece thicknesses. Is the clamping screw included and what are its dimensions? Yes, the delivery includes a M12 x 12 x 100 clamping screw to match the component’s thread and required engagement. What thread specification does the clamp use? The element uses an M12 thread, compatible with standard M12 fasteners. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Parallel Shim Set Wavy 8 Pairs 0.3mm Hardened Spring Steel ±0.004mm Pair Tolerance IT5 - AMF
Take advantage of a precision-engineered shim set that combines precision-ground surfaces, hardened spring steel and tight height tolerances for repeatable clamping and minimal setup time. Order the AMF set directly via Metav Werkzeuge or consult the Metav advisors for workshop-specific recommendations. Parallel shim set No. 6344SP — wave-shaped, precision-ground shims by AMF A Parallel shim set No. 6344SP designed for precise stacking and clamping of thin or multiple workpieces in machining and inspection environments Precision-ground spring steel Height steps of 2 mm Pair tolerance IT5 in height Nominal height tolerance ±0.004 mm Wave-shaped top reduces swarf retention Repeatable stack heights for efficient clamping The set provides precision-ground shims manufactured from hardened and tempered spring steel, delivering consistent stack heights and reliable repeatability in fixturing. Tight dimensional control — including a pair tolerance to IT5 and a nominal height tolerance of ±0.004 mm — reduces the need for repeated adjustments and speeds up changeovers. The wave-shaped top face assists in avoiding trapped chips on the support surface, which contributes to maintaining the intended clamping plane and protects the parallelism of the clamped component. Material choice and tolerances that save setup time The combination of spring steel and precision finishing ensures longevity under repeated clamping cycles while remaining thin enough for fine height adjustments. A material thickness of 0.3 mm and clearly defined height gradation of 2 mm allow for controlled buildup of shim stacks rather than improvisational packing. This reduces operator effort during setup and minimises the risk of stacked instability. Compliance of remaining dimensions with DIN ISO 2768 provides compatibility with standard tooling and fixturing practices in professional workshops. Practical design for cleaner, safer workshop use The wave-shaped surface geometry keeps the load zone clear of swarf, so the parallelism of the clamped workpiece is not impaired and no additional cleaning steps are required between adjustments. Precision grinding of each element preserves flatness on the bearing faces, which is beneficial when clamping several flat or individual thin components together. The set is intended for straightforward integration into existing clamping routines and is suited to industrial and trade environments where repeatability and cleanliness are priorities. For reliable, precision clamping with AMF quality, contact Metav Werkzeuge to discuss the Parallel shim set No. 6344SP and its suitability for specific workshop applications; Metav Werkzeuge can provide technical advice and swift supply from Emmerich Technical Data SKU: 4000603656NW Type: Nr. 6344SP - 25-39 Product type: Parallel shim set Manufacturer: AMF Content: 8 pairs Overall length: 110 mm UID: 4000603656NW Facts Material thickness: 0.3 mm Height gradation: 2 mm Pair tolerance: IT5 (height) Nominal height tolerance: ±0.004 mm Remaining dimensions: per DIN ISO 2768 Special features Wave-shaped top surface Precision-ground bearing faces Spring steel, hardened and tempered No swarf retention on support surface Maintains parallelism of clamped workpiece Suitable for multiple flat or single thin workpieces FAQ What material are the shims made from and how does that affect durability? The AMF Parallel shim set No. 6344SP is made from hardened and tempered spring steel, which offers high fatigue resistance and maintains flatness under repeated clamping cycles. What tolerances can be expected for stack heights? Stack-building with the Parallel shim set No. 6344SP is supported by a pair tolerance to IT5 and a nominal height tolerance of ±0.004 mm, ensuring reproducible results in jigs and fixtures. Is the surface finish suitable for precision inspection fixtures? Yes, the precision-ground faces of the Parallel shim set No. 6344SP provide flat bearing surfaces that support accurate clamping and do not interfere with inspection tolerances. Will chips or swarf affect clamping accuracy with these shims? The wave-shaped top profile reduces swarf retention on the support face, so the parallelism of the clamped component is preserved and additional cleaning between adjustments is often unnecessary when using this set. Can the shims be combined to clamp very thin workpieces? The design allows easy stacking of several shims to achieve fine height adjustments, making the set suitable for clamping multiple thin or flat workpieces in a controlled manner. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Parallel Shim Set Wavy 8 Pairs 0.3mm Material Thickness, Precision Ground - AMF
Take advantage of precision-ground, hardened spring steel shims with 0.3 mm thickness and a clear 2 mm height stepping to maintain workpiece parallelism and reduce setup time; order directly via Metav Werkzeuge or contact our advisers for configuration assistance. AMF Parallel shim set Nr. 6344SP - 9-23 (wavy profile, 110 mm) The AMF Parallel shim set Nr. 6344SP - 9-23 is a specialised collection of precision shims designed for accurate clamping and alignment in metalworking and general workshop fixturing. Wavy profile prevents chips on support surface Precision-ground shims, thickness 0.3 mm Hardened and tempered spring steel Height increments 2 mm, pair tolerance IT5 Maintain true parallelism with fast, repeatable setups Precision shims deliver measurable gains in setup reliability. The precision-ground surfaces and pair tolerance IT5 ensure nominal height deviations are held to ±0.004 mm, which reduces rework and inspection time. Using stepped shims streamlines the process of shimming between jaws or supports, so maintaining true parallelism of the clamped workpiece becomes a routine task rather than a daily challenge. This directly improves throughput and machining consistency. Durable material and profile for clean contact surfaces Built from hardened and tempered spring steel, the shims tolerate repeated clamping without deformation, extending service life and lowering replacement frequency. The wavy profile minimises contact of loose chips with the underside of the workpiece, so debris is less likely to compromise the contact surface. This leads to more consistent clamping forces and a lower risk of surface marking on delicate parts, preserving component quality during handling and machining. Precise increments that simplify multi‑part clamping With a 0.3 mm material thickness and 2 mm height steps, the set offers fine, graduated adjustment for stacking or combining shims to reach the required clearance. The small thickness and clear stepping make it straightforward to clamp several flat or thin components together without loss of alignment. These features reduce setup iterations and support efficient jigs and fixtures where repeatable, small adjustments are essential. Engineered tolerances for measurement confidence Tolerance design follows recognised standards to support predictable results: nominal height tolerance of ±0.004 mm and remaining dimensions in accordance with DIN ISO 2768m. Such specifications provide a verifiable basis for procurement decisions and quality audits, allowing the set to be integrated into measurement-controlled workflows and documented procedures with minimal additional calibration. Contact Metav Werkzeuge for tailored advice on integrating the AMF shims into existing fixtures and order support directly from Emmerich Technical Data Article number: 4000603655NW Type: Nr. 6344SP - 9-23 Product: Parallel shim set Brand: AMF Content: 8 pairs Length: 110 mm Facts Material thickness: 0.3 mm Height step: 2 mm Pair tolerance: tp in height IT 5 Nominal height tolerance: ±0.004 mm Length: 110 mm Set content: 8 pairs Special features Wavy profile to reduce chip retention Precision-ground surfaces Hardened and tempered spring steel Remaining dimensions per DIN ISO 2768m Advantage: no chips remain on support surface Preserves parallelism of clamped workpiece Enables clamping of several thin or flat workpieces FAQ What material are the shims made of? The shims are manufactured from hardened and tempered spring steel, which gives the AMF shim set good wear resistance and spring characteristics suited to repeated clamping. How fine are the height increments? Height increments are 2 mm per step; combined with the 0.3 mm thickness of each shim, this allows precise stacking and fine adjustment when setting up fixtures. What tolerances can be expected for height? Nominal height tolerance is ±0.004 mm and pair tolerance is specified as IT5, ensuring consistent, repeatable height control for precision applications. Can these shims prevent chips from affecting the clamping surface? Yes, the wavy profile reduces chip retention on the support surface, helping to maintain clean contact and consistent clamping pressure. Is this set suitable for clamping multiple thin workpieces? The design and fine thickness make the set suitable for clamping several flat or thin components without compromising parallelism. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Screw Vice Nr.6430S Atlas With Locknut H100-140mm, 60kg Load Capacity - AMF
Combining a 140 mm jaw width, an adjustable height of 100–140 mm and a 60 kg maximum clamping capacity delivers secure, repeatable holds for workshop and light industrial tasks; order the Atlas No. 6430S through Metav Werkzeuge or consult our specialists for specification advice. Atlas No. 6430S - 140 screw vice (AMF) — 140 mm jaw, 100–140 mm adjustable height The Atlas No. 6430S - 140 is a heavy-duty screw vice engineered for secure clamping and fine height adjustment in benchwork, jigging and assembly applications 140 mm jaw width for stable workholding Adjustable height 100–140 mm for versatile setups 60 kg maximum clamping capacity for reliable grip Secure hold and adaptable setup for repeatable results The vice’s 140 mm jaw and adjustable height provide a combination of surface contact and vertical flexibility that improves repeatability during assembly and machining tasks. The adjustable jaw height (from 100 mm to 140 mm) allows the vice to accommodate components of varying profiles without improvised shims, reducing setup time and the risk of slippage. The unit’s measured dimensions—such as the 110 mm overall length—make it straightforward to plan bench layouts and ensure compatibility with standard fixtures. These tangible specifications translate directly into faster job changeovers and a more reliable production flow. Precise movement and dependable locking for accurate positioning A robust lead mechanism, specified as 30 x 6 for the main thread, controls jaw travel with predictable increment per turn, enabling fine positional adjustment. The inclusion of a locknut (Gegenmutter) secures the chosen height, preventing unintentional movement during machining or assembly. The vice’s 46 mm spanner size facilitates rapid tightening and adjustment with standard workshop tools, while the listed 60 kg clamping capacity indicates the maximum recommended holding force for stable operations. Descriptions such as “lead screw” refer to the part that converts rotational input into linear motion; here it is optimised for controlled, repeatable clamping. Practical versatility for workshops and light industry With compact proportions and clearly defined capacities, this screw vice suits tasks from fixture building to small-part assembly. The measured throat depth of 75 mm (B2) helps determine how far workpieces can extend into the jaws, and the vice’s configuration supports consistent alignment when used with jigs or straight edges. For workshop managers, the combination of measurable performance data and mechanical simplicity reduces downtime and maintenance complexity. If precise clamping and straightforward operation are priorities, a vice with these characteristics is a pragmatic choice for daily use. Order the AMF Atlas No. 6430S – 140 through Metav Werkzeuge for robust, measured workholding; contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich Technical data SKU: 4000833127NW Type: Nr. 6430S Atlas - 140 Product: Screw vice (Schraubbock) Brand: AMF Core data Jaw width: 140 mm Adjustable height: 100–140 mm Maximum clamping capacity: 60 Lead screw (TR): 30 x 6 Throat depth (B2): 75 Overall length: 110 mm Spanner size: 46 mm Packaging unit: 1 Special features Locknut included (Gegenmutter) Compact bench vice design Model group: Gr.140 SKU identifier: 4000833127NW FAQ What is the maximum clamping capacity of this vice? The vice has a maximum clamping capacity of 60, as specified for the Atlas No. 6430S - 140. How does the adjustable height improve setup flexibility? Adjustable height (100–140 mm) allows the jaws to be positioned for different component profiles and reduces the need for additional shimming when using the vice for varied workpieces. What does the lead screw specification 30 x 6 mean in practice? The designation 30 x 6 refers to the lead screw dimensions (diameter and pitch) that determine how much the jaw moves per turn, enabling precise and predictable jaw travel. Is a spanner required for adjustments and what size is it? Adjustments and maintenance typically use standard tools; the specified spanner size for relevant fasteners on this vice is 46 mm. Can the vice be used for light machining and jigging tasks? Yes, the vice’s measured capacities and locking feature make it suitable for light machining, jigging and assembly where reliable repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com