100–140mm Screw Vice Nr.6400 Flat Support H.100–140mm, Load Capacity 120 kg - AMF
Benefit from a robust clamping solution that combines a high maximum load capacity with an adjustable height range, ensuring secure setups and shorter preparation times; order directly via Metav Werkzeuge or consult our specialists for application advice. Screw Vice Nr. 6400 - 140 with flat support, adjustable height — AMF The Screw Vice Nr. 6400 - 140 is a heavy-duty clamping device for workshop and production use, offering a flat support and a height adjustment range for precise positioning and versatile fixturing. Adjustable height 100–140 mm Jaw width 140 mm Maximum load capacity 120 Flat support for stable clamping Faster set-up through adjustable height and reliable clamping The vice delivers practical efficiency: an adjustable height range of 100–140 mm reduces reconfiguration time when switching workpieces, while the maximum load capacity of 120 provides consistent holding power for demanding tasks. The combination of height adjustability and solid clamping performance translates directly into increased throughput and fewer interruptions during machining or light assembly operations. Clear mechanical interface for maintenance and integration The vice is built around a defined spindle geometry — spindle thread 40 x 7 — and matching interface diameters D1 / D2 = 68 mm, which simplify replacement parts selection and machine-table integration. These measurable values enable planners and maintenance technicians to assess compatibility with existing fixtures and to predict service intervals, supporting a predictable production rhythm without guesswork. Stable support and precise positioning for repeatable results A flat support provides a consistent contact surface for components, improving repeatability across batches. The jaw width 140 mm offers a balance between grip area and accessibility, making the unit suitable for clamping a wide variety of parts. The vice’s design focuses on firm seating and minimal movement under load, which reduces rework and lowers scrap rates in repetitive workflows. Robust, workshop-friendly design for everyday use This clamping device is designed for practical workshop conditions: straightforward geometry, measurable connection points and simple mechanical function mean rapid familiarisation for operators and reduced training time. The construction supports routine tasks at the bench or in small-series production, contributing to a safer, more dependable workplace atmosphere while preserving machining accuracy. For expert guidance on application or to secure the AMF screw vice with 100–140 mm height adjustment, contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833116NW Type: Nr. 6400 - 140 Product name: Schraubbock Nr.6400 Gr.140 m.flacher Auflage H.100-140mm AMF Brand: AMF Packaging unit: 1 Facts Maximum load capacity: 120 Height range: 100–140 mm TR: 40 x 7 D1: 68 mm D2: 68 mm Size: 140 Special features Flat support Adjustable height Jaw width 140 mm Bench-mountable clamping device FAQ What is the adjustable height range of the vice? The adjustable height range is 100–140 mm for the Screw Vice Nr. 6400 - 140 (AMF, SKU 4000833116NW). Which spindle specification does the vice use? The vice is specified with a spindle thread of 40 x 7, and interface diameters D1 and D2 are 68 mm. What does the maximum load capacity value represent? The listed maximum load capacity is 120 as provided in the product data for the AMF screw vice; use this figure when comparing clamping demands and fixture limits. Is the vice suitable for bench mounting in a production environment? Yes, the vice’s flat support and bench-compatible geometry make it suitable for workshop benches and small-series production set-ups. How wide are the jaws of the clamping device? The vice is provided in size 140, corresponding to a jaw width of 140 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Screwstock Adapter Insert Pin Ø12mm D:37mm - AMF
Take advantage of the combination of compact dimensions and precise fit to speed up clamping setups while keeping handling simple; order the AMF attachment via Metav Werkzeuge or consult our specialists for integration advice. Screw-vice attachment No. 6440 — insertion pin Ø 12 mm, head diameter D 37 mm (AMF) A Screw-vice attachment No. 6440 engineered for reliable clamping applications where a 12 mm insertion pin and a 37 mm seating diameter ensure a stable connection in confined workshop or industrial environments Screw-vice attachment No. 6440 by AMF Insertion pin Ø 12 mm for secure fit Head diameter D 37 mm for stable seating Compact height 10 mm for tight spaces Compact design that keeps setups efficient The compact footprint of this adapter delivers a practical advantage in dense fixtures and small vices. With a compact height 10 mm and a seating diameter of D 37 mm, the component reduces the overall stack height in multi-element clamping assemblies and minimises collision risk during machining or measuring operations. The small profile supports denser workholding layouts without sacrificing contact area, which helps maintain positional stability and repeatability when frequent part changes are required. This reduces setup time and supports a smoother production flow. Fast, precise engagement for repeatable clamping A defined insertion pin Ø 12 mm provides a clear mechanical interface for pin-and-socket systems: the pin locates the attachment, the seating diameter distributes contact forces and the result is a consistent, reproducible connection. For users who perform repetitive clamping tasks, this reduces variability between jobs and simplifies alignment. The plain mechanical function requires no auxiliary systems and explains why the adapter is well suited to applications where reliability and quick changeover are priorities. Practical benefits for workshop and industrial use The design focuses on straightforward functionality and ease of handling. The large seating diameter helps distribute clamping loads across a wider area, which improves stability under lateral forces during processing. As a dedicated clamping accessory from AMF, the adapter is intended to integrate into common workshop workflows and to provide a dependable mechanical interface for fixtures that accept a 12 mm locating pin. The result is a component that supports productivity through predictable behaviour and minimal adjustment. Simple care and clear specifications for planning With its unadorned mechanical design, the attachment requires only routine inspection and cleaning to remain serviceable. The clear dimensional data — insertion pin Ø 12 mm, D 37 mm, height 10 mm — allows planners and engineers to verify fit in CAD models and on setup drawings without ambiguity. When specifying tooling or documenting fixtures, these measurable values simplify procurement and quality control. The product label and type number make traceability straightforward for stock management and reordering. For precise clamping solutions, request the AMF Screw-vice attachment No. 6440 from Metav Werkzeuge — Metav’s Emmerich warehouse ensures reliable supply and specialist advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and ordering. Technical data Article number: 4000833135NW Type: No. 6440 Label: Schraubbockaufsatz Nr.6440 Einsteckzapfen-D.12mm KGL AD 37mm AMF Manufacturer: AMF Dimensions & core data Height: 10 mm Insertion pin diameter: 12 mm Head diameter D: 37 mm Packaging unit: 1 Features & application Product type: Screw-vice attachment Brand: AMF Application: Locating and clamping via insertion pin Suitable for compact clamping assemblies FAQ What are the key dimensions of the attachment? The main dimensions are height 10 mm, insertion pin Ø 12 mm and head diameter D 37 mm, as specified for the AMF Screw-vice attachment No. 6440. Which locating sockets is the adapter compatible with? The adapter is intended for sockets or fixtures that accept a 12 mm locating pin; compatibility depends on the receiving element accommodating an insertion pin Ø 12 mm and the seating diameter D 37 mm. How is the component installed in a clamping setup? Installation is by insertion of the pin into the matching locating bore or socket; the seating diameter provides lateral support for a stable connection. How many pieces are supplied per packaging unit? The packaging unit is 1, corresponding to article number 4000833135NW. Is the material or coating specified for this item? The dataset does not specify material or coating for the AMF Screw-vice attachment No. 6440 Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Screw Vice Nr.6430S Atlas With Locknut H100-140mm, 60kg Load Capacity - AMF
Combining a 140 mm jaw width, an adjustable height of 100–140 mm and a 60 kg maximum clamping capacity delivers secure, repeatable holds for workshop and light industrial tasks; order the Atlas No. 6430S through Metav Werkzeuge or consult our specialists for specification advice. Atlas No. 6430S - 140 screw vice (AMF) — 140 mm jaw, 100–140 mm adjustable height The Atlas No. 6430S - 140 is a heavy-duty screw vice engineered for secure clamping and fine height adjustment in benchwork, jigging and assembly applications 140 mm jaw width for stable workholding Adjustable height 100–140 mm for versatile setups 60 kg maximum clamping capacity for reliable grip Secure hold and adaptable setup for repeatable results The vice’s 140 mm jaw and adjustable height provide a combination of surface contact and vertical flexibility that improves repeatability during assembly and machining tasks. The adjustable jaw height (from 100 mm to 140 mm) allows the vice to accommodate components of varying profiles without improvised shims, reducing setup time and the risk of slippage. The unit’s measured dimensions—such as the 110 mm overall length—make it straightforward to plan bench layouts and ensure compatibility with standard fixtures. These tangible specifications translate directly into faster job changeovers and a more reliable production flow. Precise movement and dependable locking for accurate positioning A robust lead mechanism, specified as 30 x 6 for the main thread, controls jaw travel with predictable increment per turn, enabling fine positional adjustment. The inclusion of a locknut (Gegenmutter) secures the chosen height, preventing unintentional movement during machining or assembly. The vice’s 46 mm spanner size facilitates rapid tightening and adjustment with standard workshop tools, while the listed 60 kg clamping capacity indicates the maximum recommended holding force for stable operations. Descriptions such as “lead screw” refer to the part that converts rotational input into linear motion; here it is optimised for controlled, repeatable clamping. Practical versatility for workshops and light industry With compact proportions and clearly defined capacities, this screw vice suits tasks from fixture building to small-part assembly. The measured throat depth of 75 mm (B2) helps determine how far workpieces can extend into the jaws, and the vice’s configuration supports consistent alignment when used with jigs or straight edges. For workshop managers, the combination of measurable performance data and mechanical simplicity reduces downtime and maintenance complexity. If precise clamping and straightforward operation are priorities, a vice with these characteristics is a pragmatic choice for daily use. Order the AMF Atlas No. 6430S – 140 through Metav Werkzeuge for robust, measured workholding; contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich Technical data SKU: 4000833127NW Type: Nr. 6430S Atlas - 140 Product: Screw vice (Schraubbock) Brand: AMF Core data Jaw width: 140 mm Adjustable height: 100–140 mm Maximum clamping capacity: 60 Lead screw (TR): 30 x 6 Throat depth (B2): 75 Overall length: 110 mm Spanner size: 46 mm Packaging unit: 1 Special features Locknut included (Gegenmutter) Compact bench vice design Model group: Gr.140 SKU identifier: 4000833127NW FAQ What is the maximum clamping capacity of this vice? The vice has a maximum clamping capacity of 60, as specified for the Atlas No. 6430S - 140. How does the adjustable height improve setup flexibility? Adjustable height (100–140 mm) allows the jaws to be positioned for different component profiles and reduces the need for additional shimming when using the vice for varied workpieces. What does the lead screw specification 30 x 6 mean in practice? The designation 30 x 6 refers to the lead screw dimensions (diameter and pitch) that determine how much the jaw moves per turn, enabling precise and predictable jaw travel. Is a spanner required for adjustments and what size is it? Adjustments and maintenance typically use standard tools; the specified spanner size for relevant fasteners on this vice is 46 mm. Can the vice be used for light machining and jigging tasks? Yes, the vice’s measured capacities and locking feature make it suitable for light machining, jigging and assembly where reliable repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140-200mm Heavy-Duty Screw Vise With Lock Nut H140-200mm, 46mm Jaw Width - AMF
Take advantage of the adjustable height (140–200 mm) and the high load capability (max. 60) to secure a wide range of workpieces reliably; order the Nr. 6430S Atlas - 200 directly via Metav Werkzeuge or ask our consultants if needed. Nr. 6430S Atlas - 200 — Screw vice with adjustable height and trapezoidal drive (AMF) The Nr. 6430S Atlas - 200 is a heavy-duty screw vice designed for versatile clamping tasks in workshop and industrial settings, offering a secure locking nut and a robust trapezoidal thread for precise adjustment. Adjustable height 140–200 mm Max load capacity 60 Jaw width 75 mm Trapezoidal thread 30 x 6 mm Stable clamping for varied workpieces The vice provides a reliable clamping solution by combining an adjustable height range with a substantial load rating. The height adjustment (140–200 mm) allows adaptation to different workpiece profiles and set-ups, reducing the need for additional shims or fixtures. A higher load capability supports tougher applications, so heavier components remain steady during machining, marking or assembly. This stability speeds up workflow and reduces rework caused by movement. Smooth, precise adjustment with trapezoidal drive The trapezoidal thread drive (30 x 6 mm) converts handle rotation into controlled linear movement, delivering repeatable jaw travel and consistent clamping force. A trapezoidal thread is chosen for its wear resistance and ability to transmit force efficiently, which benefits setups requiring frequent repositioning. The vice's jaw width (B2: 75 mm) and the specified spanner size (46 mm) make it compatible with common workshop tools and maintenance procedures, simplifying integration into existing toolsets. Compact footprint that saves bench space With an overall length of 110 mm, the vice occupies a modest area on the workbench while still offering substantive clamping capacity. Its compact design makes it suitable for busy benches and production islands where space is at a premium. The combination of compactness and robust function supports smoother operations, enabling quicker part changes and easier positioning without sacrificing clamping performance. Secure locking and low-maintenance operation The unit is supplied with a counter nut for secure locking of the threaded spindle, preventing unintended adjustment once set. The straightforward construction reduces maintenance needs and shortens downtime for routine checks. Supplied as a single packing unit, the vice is ready for installation and immediate use in small-series production or workshop environments that prioritise reliable fixturing. Contact Metav Werkzeuge for tailored advice on whether the AMF Nr. 6430S Atlas - 200 matches specific workshop requirements and request detailed technical information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833128NW Type: Nr. 6430S Atlas - 200 Product: Screw vice Brand: AMF Packaging unit: 1 Key dimensions Overall length: 110 mm Width: 18 mm Jaw width (B2): 75 mm Height range: 140–200 mm Spanner size: 46 mm Trapezoidal thread: 30 x 6 mm Max load: 60 Features Includes counter nut for locking Adjustable height mechanism Trapezoidal thread drive for precise movement Compact bench vice design Supplied as single packing unit FAQ How much height adjustment does the vice allow? The vice provides an adjustable height range from 140 mm to 200 mm, enabling the AMF Nr. 6430S Atlas - 200 to accommodate a variety of workpiece profiles. What kind of thread does the drive use and why does it matter? The drive uses a trapezoidal thread (30 x 6 mm), which offers durable, accurate linear movement and is well suited to applications requiring repeated clamping adjustments with consistent force. What is the maximum load the vice can handle? The specified maximum load is 60 (as stated in the product data), reflecting the vice’s suitability for heavier clamping tasks in a workshop environment. Is the vice ready for immediate installation on the bench? Yes; the AMF Nr. 6430S Atlas - 200 is supplied complete with a counter nut and is delivered as a single packing unit for straightforward mounting. Which tool is needed for maintenance or adjustment of the spindle? A spanner size of 46 mm is listed for relevant fasteners, making standard maintenance and occasional adjustments manageable with common workshop tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140-210mm Machine Vise Flat Jaw Height Adjustable 170kg Capacity, TR 50x8 - AMF
Take advantage of the adjustable height (140–210 mm) and the specified maximum load (170) to secure a wide range of workpieces reliably; the flat support surface and compact throat make this vice a practical choice for general workshop clamping tasks. Order or request advice directly via Metav Werkzeuge for a dependable supply and technical clarification. Screw vice Nr. 6400 - 210 by AMF — adjustable height 140–210 mm, flat support The Screw vice Nr. 6400 - 210 is a compact bench clamping tool designed for general workshop use, offering a variable working height and a sturdy flat support for stable positioning of components. Adjustable height 140–210 mm Maximum load 170 Flat support surface for stable clamping Throat TR 50 x 8 Stable clamping across variable heights for consistent workflows The vice’s adjustable height range of 140–210 mm allows secure clamping of parts with differing profiles without frequent repositioning of fixtures. The height adjustment reduces setup time and supports repetitive tasks by maintaining a consistent clamping plane, which improves process reliability. The moderate throat depth and slot dimensions (TR 50 x 8) provide clearance for small jigs and hold-downs, while the flat support promotes even contact and reduces the risk of component distortion during tightening. These attributes help to streamline bench work and minimise rework. Robust build and low-maintenance design for everyday use A compact bench vice with a focus on robust construction offers long service intervals and straightforward upkeep. The simple mechanical design means maintenance is limited to routine cleaning and lubrication of the lead screw and sliding surfaces; this supports uninterrupted operation in busy workshops. The visible design elements — such as the flat support and solid jaw geometry — are intended to deliver consistent behaviour under load, giving operators a reliable clamping platform for assembly, finishing and measurement tasks. Practical performance that supports shop productivity A maximum load rating of 170 indicates suitability for a broad spectrum of general clamping operations where moderate force and secure hold are required. The vice is intended as a versatile workstation tool to aid measuring, filing, light machining and assembly tasks. Its compact footprint preserves bench space, allowing multiple tools to be used in sequence without lengthy changeovers. By combining secure clamping with simple operation, the vice contributes to predictable cycle times and improved throughput in small-batch or repair-focused environments. For tailored technical advice or to arrange supply of the AMF screw vice Nr. 6400 - 210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833117NW Type: Nr. 6400 - 210 Label: Schraubbock Nr.6400 Gr.210 m.flacher Auflage H.140-210mm AMF Brand: AMF Product type: Schraubbock Packaging unit: 1 Facts Maximum load: 170 Height range: 140–210 mm Throat / slot: 50 x 8 D1: 80 D2: 70 Special features Flat support surface Adjustable height mechanism Compact footprint for bench use SKU / UID: 4000833117NW FAQ What height range does the vice cover? The vice offers an adjustable height range from 140 to 210 mm to accommodate varying workpiece profiles when using the AMF screw vice Nr. 6400 - 210 (SKU 4000833117NW). What does the maximum load figure indicate? The stated maximum load of 170 denotes the rated clamping capacity for the vice under normal workshop conditions as specified for the AMF Nr. 6400 - 210. Is the vice suitable for bench mounting and general workshop tasks? Yes, the vice is intended as a bench clamping tool suited to general workshop duties such as assembly, finishing and light holding operations. What is the throat or slot specification and its benefit? The throat/slot is specified as TR 50 x 8, providing clearance for fixtures and enabling the use of small hold-downs or jigs during clamping operations. Are maintenance requirements complex for this vice? Maintenance is straightforward and typically limited to keeping the lead screw and sliding surfaces clean and lubricated to ensure long service life of the AMF vice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Schraubbock Atlas Nr. 6430S Gr.320 H200-320mm mit Gegenmutter, Tragfähigkeit 40; Schlüsselweite 46 - AMF
Schraubbock Nr.6430S Atlas Gr.320 – Schraubbock Schraubbock Nr.6430S Atlas Gr.320 ist ein robuster Spannbock für präzise Fixierung von Werkstücken in Werkstatt und Fertigung. Die kompakte Bauform und die einstellbare Höhe machen ihn zur zuverlässigen Lösung für unterschiedlichste Spannaufgaben. Hohe Tragfähigkeit bis 40 kg Höhenverstellung 200–320 mm Inklusive Gegenmutter für sichere Klemmung Schlüsselweite 46 mm für Standardwerkzeuge Kompakte Grundfläche Breite 22 mm Robuste Tragfähigkeit für sicheres Spannen Der Schraubbock bietet eine Tragfähigkeit von maximal 40 kg, was stabile Spannverhältnisse auch bei anspruchsvollen Arbeiten ermöglicht. Die belastbare Konstruktion reduziert Vibrationen und sorgt für konstante Positionierung des Werkstücks. Durch die zuverlässige Gegenmutter bleibt die eingestellte Spannung erhalten, was Rüstzeiten verkürzt und Ausschuss reduziert. Flexible Höhenverstellung für vielseitige Werkstücke Mit einer einstellbaren Höhe von H min. 200 mm bis H max. 320 mm lässt sich der Schraubbock schnell an verschiedene Bauteilhöhen anpassen. Die verstellbare Bauhöhe ermöglicht ergonomisches Arbeiten und erleichtert das Spannen von unterschiedlich großen Werkstücken. Die begrenzte Grundbreite von Breite 22 mm sorgt für platzsparende Montage auf der Aufspannfläche. Passgenau für den Werkstattbetrieb und die Fertigung Dieses Spannmittel richtet sich an Werkstätten, Maschinenbauer und Prototypenfertiger, die eine robuste und leicht bedienbare Spannlösung benötigen. Die Schlüsselweite 46 mm ermöglicht den Einsatz gängiger Werkzeuge, die Verpackungseinheit 1 erleichtert die Ersatzteil- und Vorratsplanung. Die kompakte Gesamtlänge von 160 mm macht den Schraubbock zur praktischen Ergänzung jeder Werkzeugbank. Einfache Integration und technische Details Der Schraubbock ist für den direkten Einsatz konzipiert und lässt sich ohne großen Montageaufwand in bestehende Vorrichtungen integrieren. Technische Parameter wie TR 30 x 6 und die Angabe B2: 90 mm unterstützen die präzise Einplanung in Aufspannsysteme. Die klare Konstruktion minimiert Wartungsaufwand und steigert die Verfügbarkeit von Arbeitsplätzen. Empfehlung: Der Schraubbock von AMF überzeugt durch seine hohe Tragfähigkeit und die flexible Höhenverstellung — für belastbare Spannlösungen direkt beim Metav Vertrieb anfragen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Technische Daten Artikelnummer: 4000833130NW Marke: AMF Typ: Nr. 6430S Atlas - 320 Produktart: Schraubbock Verpackungseinheit: 1 Daten Breite: 22 mm Gesamtlänge: 160 mm Schlüsselweite: 46 mm Tragfähigkeit max.: 40 kg TR: 30 x 6 H min.: 200 mm H max.: 320 mm B2: 90 mm UID: 4000833130NW Besonderheiten Gegenmutter (sichert Einstellung) Kompakte Bauform TR 30 x 6 (Gewindeabmessung) B2: 90 mm (Anschlagmaß) FAQ Wie hoch ist die einstellbare Höhe des Schraubbocks? Die einstellbare Höhe liegt bei H min. 200 mm und H max. 320 mm. Der Schraubbock Nr.6430S Atlas Gr.320 von AMF ermöglicht so sichere Spannpositionen für verschiedene Werkstückhöhen. Für welche Belastungen ist der Schraubbock ausgelegt? Der Schraubbock weist eine Tragfähigkeit von maximal 40 kg auf und eignet sich damit für typische Spannaufgaben in Werkstatt und Fertigung. Welche Schlüsselweite wird benötigt? Für die Bedienung des Schraubbocks wird eine Schlüsselweite von 46 mm verwendet, was den Einsatz handelsüblicher Werkzeuge ermöglicht. Ist die Gegenmutter im Lieferumfang enthalten und was bewirkt sie? Ja, die Gegenmutter ist Bestandteil des Schraubbocks und sorgt für sichere Fixierung der eingestellten Position, wodurch sich Nachstellungen reduzieren lassen. Welche Maße sind für die Einplanung relevant? Wichtige Maße sind die Gesamtlänge 160 mm, die Breite 22 mm sowie die Anschlagangabe B2: 90 mm; diese Werte helfen bei der Integration in Aufspannvorrichtungen. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Screw Vice Attachment Nr. 6441 With 12mm Insert Pin, Prism Jaw 65mm - AMF
Compact, low-profile clamping with a Ø12 mm insertion pin and prism jaw AD 65 mm for secure support of cylindrical parts; adaptable clamping range D1 22–100 mm. Order directly via Metav Werkzeuge or consult the technical team for integration advice. Schraubbockaufsatz No. 6441 — screw-vice adaptor with Ø12 mm insertion pin and prism jaw AD 65 mm (AMF) Schraubbockaufsatz No. 6441 is a compact screw-vice adaptor designed to provide stable, repeatable clamping for workshop and production environments using a prism geometry for cylindrical and profiled components Compact low-profile design with 30 mm height Insertion pin Ø 12 mm for secure mounting Prism jaw AD 65 mm for stable support Clamping range D1: 22–100 mm Stable prism support for round and profiled components The prism jaw geometry delivers reliable seating of cylindrical workpieces by spreading contact along a defined line rather than at a single point. The prism jaw AD 65 mm secures shafts and rods with reduced slippage and improved concentricity, which is particularly beneficial for turning-in-place or light finishing operations. With a clamping range of D1 22–100 mm, the adaptor covers a wide span of common workshop diameters, reducing the need for frequent jaw changes and streamlining setup procedures. Fast insertion and compact footprint shorten setup time Fitted with an insertion pin Ø 12 mm, the adaptor enables quick installation into compatible vice sockets, cutting downtime between jobs. The height 30 mm provides a low-profile solution that maintains clearance for machining operations while keeping the clamped centre close to the workplane, which helps preserve machining geometry and reduces vibration. These features together support higher throughput and simpler changeovers in repetitive or small-batch production. Designed for reliable workshop integration and consistent results Built as a dedicated screw-vice adaptor, the component ensures consistent positioning across repeated setups and is suited for general workshop machining tasks where accurate axial support is required. The clear specification of mounting and clamping dimensions simplifies machine planning and inventory management. Where precision seating and repeatability matter, this adaptor contributes to predictable process outcomes and reduced rework. Contact Metav Werkzeuge for tailored advice and reliable supply of the AMF screw-vice adaptor No. 6441, including information on matching vice sockets and application recommendations Technical Data Article number: 4000833137NW Type: Nr. 6441 Label: Schraubbockaufsatz Nr.6441 Einsteckzapfen-D.12mm Prisma AD 65mm AMF Product type: Schraubbockaufsatz Manufacturer / Brand: AMF Facts Height: 30 mm Insertion pin Ø: 12 mm Prism jaw AD: 65 mm Clamping range D1: min. 22 mm / max. 100 mm Packaging unit: 1 UID: 4000833137NW Special features Compact, low-profile adaptor Prism geometry for cylindrical support Quick-mount insertion pin Suitable for workshop and production setups FAQ What clamping diameters does the adaptor support? The adaptor supports a clamping range of D1 22–100 mm; the prism jaw AD 65 mm provides stable seating across that span for shafts and rods when using the Schraubbockaufsatz No. 6441 (AMF) What is the insertion pin diameter and mounting height? The adaptor uses an insertion pin Ø 12 mm and has a height of 30 mm, dimensions specified for straightforward mounting into vices that accept a 12 mm locating pin Is the adaptor suitable for cylindrical workpieces only? The prism jaw is optimised for cylindrical and profiled components, offering line contact that reduces slippage; it can also support certain profiled parts where a prism seating is appropriate Are material and coating details provided for the adaptor? Material and coating information are not specified in the available product data for the Schraubbockaufsatz No. 6441; further technical details can be requested if required Which product code identifies this adaptor? The adaptor is listed under article number 4000833137NW and type Nr. 6441, marketed by AMF Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42-52mm Screw Vice Nr. 6400 Group 52 Flat Base Load Capacity 100, TR 30 x 4 - AMF
Take advantage of a compact clamping solution that combines a flat support and a height-adjustable range of 42–52 mm for consistent, repeatable positioning in jig and fixture setups; order directly via Metav Werkzeuge or ask the consultants for assistance. AMF Screw Clamp Block Nr. 6400 - 52 — flat support, height 42–52 mm AMF Screw Clamp Block Nr. 6400 - 52 is a compact clamping element designed for precise, repeatable fixation in production fixturing and workshop jigs; suitable where stable support and reliable thread-driven adjustment are required Flat support for secure clamping Height adjustable 42–52 mm Trapezoidal thread TR 30 x 4 Max. load capacity 100 Consistent clamping accuracy for repetitive production The clamp block offers a height-adjustable range (H min. 42 mm to H max. 52 mm) that enables fine vertical alignment when integrating into fixtures or machine tables. Thanks to the trapezoidal thread TR 30 x 4, movement is smooth and backlash is reduced compared with standard metric threads, which supports repeatable positioning during series work. This mechanical precision reduces set-up time and ensures that fixtures keep their reference points across repeat operations, improving throughput and process reliability. Robust mechanics that simplify maintenance and integration Constructed for workshop use, the component features equal-diameter mounting interfaces (D1: 50 mm, D2: 50 mm) that make it straightforward to seat and replace in modular clamping systems. The defined maximum load capacity (100) provides a clear performance threshold for design calculations and safety margins in jig construction. The screw-driven concept preserves clamping force under cyclic loads and requires minimal maintenance: routine inspection of the thread and lubrication keeps the unit operational with low downtime, supporting consistent production cycles. Practical benefits for engineering and tooling teams As a compact clamping element, the block reduces the complexity of bespoke fixtures while retaining flexibility for multiple part families. The flat support allows broad contact with workpieces where surface stability matters, while the screw adjustment enables controlled force application without relying on hydraulic or pneumatic systems. For engineering teams, integration is straightforward: the unit’s clear mechanical parameters permit fast CAD modelling and simple verification of clamping geometry, shortening the development loop for new jigs and reducing the iterative trial phase. For precision clamping and practical workshop integration, request supply details and technical advice from Metav Werkzeuge regarding the AMF screw clamp block Nr. 6400 - 52 (SKU 4000833113NW) — support and delivery are coordinated from Emmerich. Technical data Article number / SKU: 4000833113NW Type: Nr. 6400 - 52 Product type: Screw clamp block Manufacturer: AMF Packaging unit: 1 Facts Max. load capacity: 100 Thread: TR 30 x 4 Height min.: 42 mm Height max.: 52 mm D1: 50 mm D2: 50 mm Special features Flat support Trapezoidal thread for low backlash Size: Gr. 52 FAQ What applications suit this clamp block best? The AMF screw clamp block Nr. 6400 - 52 is intended for fixture and jig clamping in workshop and light industrial settings where a flat support and height adjustment (42–52 mm) are required for stable part positioning. How is vertical adjustment achieved on this unit? Vertical adjustment is provided via the trapezoidal thread (TR 30 x 4) built into the AMF screw clamp block, allowing controlled and repeatable movement between the specified height limits. Which mounting dimensions must be considered when integrating the block into a fixture? The block has two mounting diameters (D1: 50 mm and D2: 50 mm) that should be matched to locating bores or seats in the fixture layout to ensure secure installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Clamping Vise Flat Support Height 50-70mm Load Capacity 100kg TR 30x4 - AMF
Take advantage of a compact clamping solution that combines robust load handling, adjustable flat support and simple operation for consistent workshop results. The combination of secure thread drive and a 50–70 mm support height ensures stable seating of varied workpieces. Order the AMF screw clamp directly via Metav Werkzeuge or ask our consultants if needed. AMF Screw Clamp Nr. 6400 - 70 — flat support, adjustable 50–70 mm The AMF Screw Clamp Nr. 6400 - 70 is a compact clamping device for workshop and industrial fixtures, offering a flat support with an adjustable height range to hold a variety of components securely. Flat support, height adjustable 50–70 mm Max. capacity 100 Thread TR 30 x 4 for secure clamping Compact group size 70 with 50 mm diameters Reliable clamping performance for routine production This clamping unit delivers predictable, repeatable holding with a focus on operational efficiency. The screw clamp mechanism, driven by a TR 30 x 4 thread, converts operator input into steady axial force, reducing the need for frequent repositioning. For production environments where cycle time and reproducibility matter, the stable mechanical action supports quicker setup and consistent results, helping to reduce rework and maintain throughput. Flexible flat support for varied workpieces An adjustable flat support with a 50–70 mm height range provides flexibility when securing parts of different profiles. The adjustable height allows the support to be aligned with the workpiece datum, improving contact area and reducing deformation risk on delicate components. This adaptability makes the device suitable for workshops that process both small-scale fixtures and larger assemblies, simplifying the clamping process while preserving precision. Compact design that integrates into workshop jigs Designed as a group-size 70 clamping element with D1/D2 = 50 mm, the item is easy to incorporate into existing jigs and fixtures. The compact footprint enables close placement of multiple clamps when evenly distributed holding force is required. Given its construction, the unit is appropriate for metalworking and general workshop use where secure seating and repeatable positioning are essential. The AMF screw clamp balances robustness and space efficiency for everyday shop applications. Contact Metav Werkzeuge for tailored advice on integrating the AMF screw clamp Nr. 6400 - 70 into production fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com for immediate assistance and supply from Emmerich Technical Data Article number: 4000833114NW Type: Nr. 6400 - 70 Product: Screw clamp Brand: AMF Packaging unit: 1 Core specifications Max. capacity: 100 Thread: TR 30 x 4 Height min.: 50 mm Height max.: 70 mm D1: 50 mm D2: 50 mm Features Flat support Group size 70 Compact design Ready for jig integration FAQ What is the maximum load the clamp can take? The maximum load is stated as 100 for the AMF screw clamp Nr. 6400 - 70. How is the support height adjusted? Height adjustment is achieved via the clamping assembly; the adjustable flat support on the AMF screw clamp allows settings from 50 mm to 70 mm. Is the clamp suitable for integration into existing fixtures? Yes, the compact group size 70 and 50 mm diameters make the clamp suitable for integration into workshop jigs and fixture plates. Which thread specification does the clamping drive use? The clamping drive uses a TR 30 x 4 thread, providing secure and reliable axial movement for clamping action. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Screw Vice With Flat Jaw Support H38-50mm, Load Capacity 25kg - AMF
Take advantage of a compact, low-profile clamping solution that combines adjustable height (38–50 mm) with a flat support and a rated max. load of 25 kg for consistent workshop performance; order via Metav Werkzeuge or consult the team for specification guidance. AMF Screw Clamp No. 6400, Size 50 — flat support, H 38–50 mm AMF Screw Clamp No. 6400, Size 50 is a compact screw clamp for low-profile clamping and light assembly or machining tasks, offering a small footprint and reliable holding power Flat low-profile support Adjustable height 38–50 mm Max. load 25 kg Compact jaw diameter 31 mm Precise, low-profile clamping that saves setup time The screw clamp delivers stable clamping where space is limited. Its flat support reduces workpiece lift and facilitates accurate alignment on assembly jigs and fixtures. With an adjustable height of 38–50 mm, the device allows fine tuning of clamping position without additional shimming, which shortens setup times and supports repeatable results. The compact jaw diameter of 31 mm provides a concentrated hold for small components while maintaining accessibility. Secure mounting and clear technical fit for workshop systems Designed with a mounting interface of TR 20 x 4 mm, the component integrates cleanly into slot-based fixture systems and modular tooling plates. The rated max. load of 25 kg gives a verifiable basis for selection when planning clamping forces in small- to medium-duty operations. Clear numeric specifications reduce uncertainty during procurement and help maintain throughput: the mechanical data supports predictable behaviour under normal workshop loads and repetitive cycles. Robust everyday use with straightforward integration Constructed for routine workshop environments, this clamp combines durability with simple handling. The low-profile design minimises interference with tooling paths and the flat support improves contact stability for thin or delicate parts. Integration requires minimal amendment to existing fixturing thanks to standardised dimensions, enabling quick replacement or addition to modular setups. Metav’s stock and logistics ensure dependable delivery from Emmerich and assistance is available for technical queries. Choose the AMF screw clamp No. 6400 for compact, reliable clamping — contact Metav Werkzeuge for specification advice and prompt delivery from our Emmerich hub Technical data Article number: 4000833112NW Type: Nr. 6400 - 50 Product: Screw clamp Brand: AMF Packaging unit: 1 Dimensions & performance Max. load: 25 kg TR: 20 x 4 mm Height range: 38–50 mm D1: 31 mm D2: 31 mm Materials & features Flat support for low-profile clamping T-slot compatibility 20 x 4 mm Compact jaw diameter 31 mm Suitable for assembly and light machining FAQ What is the maximum load capacity of this clamp? The AMF Screw Clamp No. 6400 (SKU 4000833112NW) has a rated maximum load of 25 kg, which serves as the selection baseline for light- to medium-duty clamping tasks. How is the clamp mounted to a fixture plate? Mounting is achieved via a TR 20 x 4 mm slot interface; this standardised dimension allows the clamp to be integrated into common slot-based fixture systems and modular tooling plates. What height adjustment does the clamp allow? The device provides an adjustable height range of 38–50 mm, enabling fine positional tuning without the need for shims. Is this clamp suitable for thin or delicate parts? Yes — the flat support and compact jaw geometry give stable contact and reduced point loading, which is beneficial when securing thin or fragile components during assembly. Can this clamp be used in automated processes? The compact profile and standard interface dimensions make the clamp compatible with many automated and semi-automated setups; check the specified TR and height range against the machine’s tooling envelope for confirmation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52-62mm Clamping V-Block With Flat Support And Magnetic Base, Load 100 N - AMF
Take advantage of the adjustable height and magnetic base to secure small workpieces quickly while maintaining precise set-ups; the compact diameters and reliable max. load capacity of 100 kg ensure stable support across assembly and inspection tasks. Order directly via Metav Werkzeuge or request tailored advice from the consultants. AMF Screw Support No. 6400M - 62 — adjustable support with magnetic base, 52–62 mm The AMF Screw Support No. 6400M - 62 is an adjustable screw support with a flat contact surface and an integrated magnetic base, designed for secure positioning and support of components in machining, assembly and inspection applications. Adjustable height 52–62 mm Magnetic base for firm hold Max. load capacity 100 kg Thread 30 x 4 for fine adjustment Stable support for machining and inspection The component delivers a secure positioning solution where repeatable support is required. The combination of a flat contact surface and an integrated magnetic base allows the support to be fixed on ferrous machine tables or fixtures, so setups remain stable during measurement or light machining tasks. This reduces clamping time and minimises rework, supporting a more efficient workflow in the workshop. Fine, reliable adjustment for consistent set-ups A thread 30 x 4 provides controlled, incremental height changes across the adjustable height range of 52–62 mm, enabling precise alignment with jigs and tooling. Because the adjustment mechanism is coarse enough for quick rough setting yet fine enough for accurate levelling, the support is suitable for repeatable processes where consistent vertical position is essential. The measured approach to adjustment improves process reliability. Compact footprint with practical load capacity The support features compact diameters (top and base around 50–55 mm) and a max. load capacity of 100 kg, making it a space-efficient solution for benches, fixtures and small machines. The small footprint allows multiple supports to be used in close proximity, while the rated capacity is sufficient for many component-holding and assembly tasks. This balance of size and strength helps maintain a tidy workstation without sacrificing stability. Designed for workshop durability and quick deployment Constructed for everyday shop use, the support is finished for practical handling and quick placement. The flat support is suited to a variety of workpiece profiles, while the magnetic base facilitates rapid repositioning without the need for additional clamps. For operations that demand frequent changeovers, this setup reduces downtime and streamlines setup procedures, contributing to increased productivity. Contact Metav Werkzeuge for specific delivery options or to discuss how the AMF Screw Support No. 6400M - 62 can be integrated into existing clamping setups Technical data Article number / SKU: 4000833475NW Type: Nr. 6400M - 62 Item name: Schraubbock Nr.6400M Gr.62 m.flacher Auflage u.Magnetfuß H.52-62mm AMF Product type: screw support Manufacturer: AMF Packaging unit: 1 Internal ID: 4000833475NW Dimensions & performance Max. load capacity: 100 kg Thread: 30 x 4 Height minimum: 52 mm Height maximum: 62 mm D1: 50 mm D2: 50 mm D3: 55 mm Features Flat support surface Magnetic base for fixing to ferrous surfaces Fine-thread adjustment Compact top and base diameters FAQ What surfaces is the magnetic base suitable for? The magnetic base is designed to hold the AMF Screw Support No. 6400M - 62 firmly on ferrous machine tables and steel fixtures, enabling stable support during assembly and inspection. How precise is the height adjustment? Height is adjusted by a 30 x 4 thread on the AMF screw support, which permits controlled changes across the 52–62 mm range for repeatable set-ups. What load can the support carry? The support has a stated maximum load capacity of 100 kg, which is suitable for many small assembly and inspection tasks where compact supports are required. Can multiple supports be used together for larger components? Yes, the compact diameters and flat contact surfaces of the AMF Screw Support No. 6400M - 62 allow several units to be positioned close together to distribute load and support larger workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60-80mm Screw Clamp With Flat Support And Magnetic Base, Load Capacity 100 N, TR 30x4 - AMF
The combination of an adjustable height range, a magnetic base and a flat support delivers versatile, secure clamping for frequent workshop tasks; robust construction and a stated load figure ensure dependable positioning. Order directly through Metav Werkzeuge or contact our consultants for application advice. Bench Vice No. 6400M - 80 — flat support and magnetic base (AMF) The Bench Vice No. 6400M - 80 is a compact workshop vice designed for secure workholding with an adjustable height range and a sturdy magnetic base for rapid, repeatable set-up. Height adjustable 60–80 mm Magnetic base for stable attachment Flat support to protect workpieces Robust load capacity up to 100 Secure, adjustable workholding for varied tasks A precision workholding solution, the vice offers an adjustable height of 60–80 mm, which enables alignment with jigs, fixtures and other tool stations. The magnetic base provides quick, repeatable positioning on ferrous bench tops and machines, reducing set-up time and increasing throughput on repeated operations. With a stated load capacity of 100, the clamp is intended to deliver secure clamping for typical light to medium workshop duties while the flat contact area minimises point loading on components. Gentle support that protects finished surfaces The vice’s flat support is designed to distribute clamping pressure across a broader area, which helps avoid marks on softer workpieces and reduces the need for additional protective packing. This design feature is especially useful when holding delicate components or pre-finished parts, as the contact geometry lowers the risk of deformation. The result is a balance between firm retention and component care, enabling safer handling during machining, assembly or inspection tasks. Fast setup and dependable positioning in the workshop Built for efficient workflow, the magnetic mounting simplifies relocation and repeatable fixture placement, reducing machine downtime between operations. The compact format and stable base support make the unit suitable for maintenance benches, small production cells and measurement benches where quick changes are common. Where repeatability and reliable holding are priorities, this clamp provides a pragmatic mix of speed and stability for day‑to‑day workshop demands. For application guidance or to discuss compatibility with existing fixtures, contact Metav Werkzeuge for expert advice on the AMF bench vice No. 6400M - 80 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833476NW Type: Nr. 6400M - 80 Manufacturer: AMF Product type: Bench vice Packaging unit: 1 Facts Max. load capacity: 100 Height range: 60–80 mm D1: 50 mm D2: 50 mm D3: 55 mm TR: 30 x 4 Special features Flat support Magnetic base Height-adjustable FAQ What is the adjustable height range of the vice? The AMF bench vice No. 6400M - 80 offers an adjustable height range of 60–80 mm (SKU 4000833476NW), enabling alignment with various fixtures and workstations. Can the magnetic base be used on all benches? The magnetic base secures the vice reliably to ferrous surfaces; for non‑ferrous benches a separate mounting solution will be required when using the No. 6400M - 80. Is the flat support suitable for delicate components? Yes, the flat support on the No. 6400M - 80 spreads clamping force to reduce marking and is suitable for holding pre‑finished or softer workpieces during light machining and assembly. What does the listed load figure indicate? The specification lists a load capacity of 100 for the No. 6400M - 80 (AMF, SKU 4000833476NW), which is intended as an indication of its robust holding capability for typical workshop tasks. Which dimensions are provided for mounting and interfaces? Key dimensional references include D1: 50 mm, D2: 50 mm, D3: 55 mm and the thread indication TR: 30 x 4 as given in the product data for the No. 6400M - 80. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70-100mm Screw Vise No. 6400 Flat Support, Max Load 100 N - AMF
Take advantage of a compact, adjustable support that combines a max. load of 100 with a flat support plate and a precise TR 30 x 4 thread for reliable workshop clamping; order the component directly via Metav Werkzeuge or consult our advisors for setup recommendations. AMF Screw clamp Nr. 6400 - 100 — adjustable height 70–100 mm, flat support AMF Screw clamp Nr. 6400 - 100 provides an adjustable clamping support for fixtures and general workshop use, suited to repeatable setups and stable part support Adjustable height 70–100 mm range Flat support plate for stable contact TR 30 x 4 precision thread Max. load 100 for secure holding Stable support for repeatable clamping The adjustable height of 70–100 mm allows controlled positioning of components during machining and assembly, reducing rework and set-up time. The flat support design delivers consistent contact across workpieces, which improves repeatability. Built for workshop environments, this clamping support converts thread movement into reliable vertical adjustment, enabling straightforward alignment with fixtures. The compact construction in size Gr.100 keeps the footprint small while maintaining the necessary contact surface for stable holding. Precision mechanics for consistent setups A TR 30 x 4 thread provides coarse, dependable pitch for fast adjustment and secure locking under load. With diameters D1 50 mm and D2 50 mm, the component offers standardised interfaces for integration into existing clamping fixtures and subplates. These dimensions support accurate height control and mechanical stability, making the part suitable for routine production environments where tolerance to variation must be minimised. The functional design focuses on motion control and long-term mechanical integrity. Capacity and application versatility Rated with a max. load of 100, the device is sized to support a wide range of workshop tasks without over-specification. The flat support surface and the adjustable spindle make it suitable for fixture building, jigs and general support duties in metalworking and light assembly. Supplied as a single unit, the component is pragmatic for replacement or for incremental upgrades of existing clamping systems. Selected where straightforward, mechanical solutions are preferred, the construction emphasises robustness and ease of integration. Secure the AMF screw clamp via Metav Werkzeuge for dependable delivery from Emmerich — enquiries: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000833115NW Type: Nr. 6400 - 100 Brand: AMF Product: Screw clamp Packaging unit: 1 Facts Max. load: 100 Thread: TR 30 x 4 H min: 70 mm H max: 100 mm D1: 50 mm D2: 50 mm Special features Flat support plate Size Gr.100 Compact adjustable support FAQ What height range does the clamp cover? The AMF screw clamp Nr. 6400 - 100 has an adjustable height range from 70 mm to 100 mm. What thread specification is used for adjustment? Adjustment is via a TR 30 x 4 thread, providing coarse, reliable pitch for height changes. What load can the support carry? The device is rated for a maximum load of 100, suitable for a variety of workshop support tasks. Are the support diameters compatible with standard fixtures? Yes, the clamp features D1 50 mm and D2 50 mm dimensions allowing integration with common fixture interfaces. Is the component supplied as a single unit? The product is supplied in a packaging unit of 1 and is intended for direct installation into existing clamping setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-110mm Screw Vice With Flat Rest And Magnetic Base, 100kg Capacity, 30x4 Thread - AMF
Product data error: the manufacturer "AMF" is not listed among the authorised manufacturers provided; please supply a valid manufacturer from the approved list to ensure compliance with the specified requirements and avoid any potential delays or issues in processing the product data, as it is essential to adhere to the approved list of manufacturers to maintain accuracy and reliability in the system, ensuring that all entries meet the necessary standards and guidelines set forth for proper validation and approval, which is a critical step in maintaining the integrity and functionality of the overall process.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com