160mm Lifting Plate Magnet With Eccentric D-Handle 0.9 kN Holding Force - TECWERK
Take advantage of the combination of compact dimensions, a secure eccentric lock and a clear specification for sheet thickness to streamline handling of ferrous plates. Order the unit directly via Metav Werkzeuge or consult our specialists for application matching. Plate lifting magnet L160 x 150 x 25 mm with eccentric on D-handle — TECWERK (0.9 kN) Plate lifting magnet L160 x 150 x 25 mm with eccentric on D-handle — a compact manual magnet for safe handling and short transfers of ferrous sheets in workshops and light industry Compact flat design 160 x 150 x 25 mm Holding force 0.9 kN at 10 mm steel Eccentric lock on D-handle for secure grip Suitable for sheet thickness from 2 mm Faster, safer handling for short material transfers The plate lifting magnet offers a reliable, low-complexity method to move ferrous sheets where crane or vacuum solutions are disproportionate. With a rated holding force of 900 N, specified at 10 mm sheet thickness, the device reduces manual strain and speeds up small lifting tasks. The compact 160 x 150 x 25 mm footprint allows use in confined spaces and on crowded benches, improving workflow without adding significant infrastructure. The specification for minimum sheet usage from 2 mm supports predictable performance planning and helps avoid misuse on unsuitable thin materials. Secure operation through eccentric locking and robust mechanics Operation is simplified by the built-in eccentric lock on the D-handle, which converts a short lever action into a positive magnetic engagement and disengagement. This mechanical solution ensures consistent clamping behaviour and reduces the risk of accidental release during transit. The compact construction emphasises mechanical reliability over electronics, yielding low maintenance needs and clear inspection points for safety checks. For teams unfamiliar with magnetic lifting, the eccentric mechanism provides an intuitive, reproducible action that is easy to train on and to integrate into standard operating procedures. Practical integration into workshop routines and specification clarity Designed for routine workshop use, this magnet supports repeatable handling tasks with minimal setup. The combination of a clearly stated holding force and recommended sheet thickness simplifies material planning: procurement and shop-floor staff can match the magnet to the intended sheet stock without lengthy trials. The straightforward design reduces downtime: there are no batteries or sensors to monitor, and inspection is limited to visual checks of the housing and the D-handle mechanism. Where traceable specification is required for process documentation, the unit’s numeric data enables quick entries into work orders or tool lists. Contact Metav Werkzeuge today to discuss how the TECWERK plate lifting magnet can be deployed in your workshop, including confirmation of suitability for specific sheet stocks — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832300NW Product type: Plate lifting magnet Dimensions: 160 x 150 x 25 mm Version: with eccentric on D-handle Holding force max: 900 N Total height: 175 mm Packaging unit: 1 Manufacturer: TECWERK Numbers / Core technical data Holding force specified at 10 mm sheet: 900 N Dimensions (L x W x H): 160 x 150 x 25 mm Minimum suitable sheet thickness: from 2 mm Total height: 175 mm Designs / Special features Eccentric lock on D-handle Compact flat housing Manual magnetic actuation Suitable for handling ferrous sheets FAQ What is the maximum holding force of this magnet? The maximum holding force is 900 N, as specified for a 10 mm steel sheet for the TECWERK plate lifting magnet. Can the magnet be used on thin sheets? The device is suitable for sheets from 2 mm thickness upward; the specified holding force applies at 10 mm, so thinner material will reduce the effective grip. How is the magnet engaged and released? Engagement and release are performed via the eccentric lock built into the D-handle, providing a simple mechanical action for reliable operation. Is the magnet suitable for continuous or heavy overhead lifting? This unit is designed for short transfers and workshop handling rather than prolonged overhead suspension; selection should follow the stated holding values and intended use. Which standard checks are recommended before use? Visual inspection of the housing and D-handle mechanism and verification of intended sheet thickness against the specified holding force are recommended before each operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
77mm Plate Lifting Magnet With Leather Strap 150N Holding Force - TECWERK
Take advantage of the compact design and reliable retention of this lifting magnet to speed handling of small ferrous plates while maintaining safe grip through the supplied leather strap; order directly via Metav Werkzeuge or contact their consultants for application advice. Plate hand lifting magnet L77 x W37 x H14.5 mm with leather strap, 0.15 kN (TECWERK) Plate hand lifting magnet L77 x W37 x H14.5 mm with leather strap, 0.15 kN is a compact manual lifting aid for handling small ferrous sheets and components in workshop environments Compact dimensions 77 x 37 x 14.5 mm Leather strap for secure handling Holding force up to 150 N Suitable for sheet thickness from 2 mm Faster handling of small ferrous parts with predictable retention The compact lifting magnet delivers a consistent holding force that simplifies short-distance handling and positioning tasks. With external dimensions of 77 x 37 x 14.5 mm, the unit fits into confined work areas and on small benches where larger devices would be impractical. The specified maximum holding force of 150 N (0.15 kN) provides a clear, quantifiable performance figure that supports planning of manual handling processes and reduces handling time in repetitive tasks. By stating the retention value explicitly for thin material conditions, the specification enables pragmatic selection and integration into existing workflows. Secure grip and safer handling thanks to the leather strap Equipped with a leather strap, the tool offers improved manual control during lifting and transfer operations; the strap reduces the risk of slippage and allows a steady grip when manoeuvring small plates. The combination of a dedicated strap and compact geometry reduces hand fatigue during repeated cycles and supports safer, more controlled handling in assembly and maintenance applications. Where consistency matters, the visible mechanical retention figure and the strap together help ensure repeatable results when placing or removing components. Clear material suitability and application guidance Technical notes attached to the product indicate a suitable sheet thickness from 2 mm, while the stated retention data refers to conditions at 1 mm for reference. This distinction aids selection: the tool is intended for relatively thin ferrous plates but performs reliably once minimum thickness is observed. The transparent specification supports risk-aware use in light fabrication, repairs and small-part logistics, where predictable magnetic grip is needed rather than heavy lifting capacity. Compact design that supports workshop efficiency The small footprint of the device makes it particularly useful where space is limited or where multiple items must be handled in close proximity. The design reduces obstruction on workbenches and allows rapid placement and retrieval of parts without complex handling fixtures. As a straightforward manual aid, the magnet contributes to smoother workflows and faster cycle times in repetitive tasks, delivering a measurable productivity benefit for small-batch or shop-floor operations. Contact Metav Werkzeuge for tailored advice on application suitability and supply; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss this TECWERK lifting magnet and delivery from Emmerich Technical data Article number: 4000832301NW Product type: Plate hand lifting magnet Brand: TECWERK Execution: with leather strap Packing unit: 1 Core data Dimensions: 77 x 37 x 14.5 mm Total height: 14.5 mm Maximum holding force: 150 N Specified holding force reference: at 1 mm sheet thickness Suitable sheet thickness: from 2 mm Special features Leather strap included Compact form factor for confined spaces Manual, non-powered operation FAQ What is the maximum holding force of this lifting magnet? The TECWERK plate hand lifting magnet has a maximum holding force of 150 N (0.15 kN) as specified for reference conditions. Which sheet thicknesses are suitable for use? The unit is designed for sheet thicknesses from 2 mm, with the manufacturer providing retention data referenced at 1 mm for comparative purposes. Is a leather strap included and how does it help? Yes, the device is supplied with a leather strap, which improves grip and handling safety when moving or positioning small ferrous plates. Can the magnet be used for heavy lifting tasks? This compact hand-held magnet is intended for light handling and positioning; the 150 N rating defines its practical limit and is not suitable for heavy lifting applications. What is the SKU for ordering or reference? Reference SKU: 4000832301NW for procurement and technical enquiries. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com