0 Vertical Clamp With Horizontal Foot M4 x 25 Pressure Screw, 500 N Holding Force - AMF
Compact, reliable clamping with a small footprint and precise adjustment makes this vertical clamp an efficient choice for modular fixtures; its horizontal base allows flexible mounting while holding forces up to 700 N secure workpieces reliably — order directly via Metav Werkzeuge or contact the consultants for application advice. Vertical Clamp No. 6800, Size 0 — horizontal base (AMF) Vertical Clamp No. 6800, Size 0 is a compact vertical clamping device with a horizontal base designed for flexible fixture mounting and secure workholding in small to medium machining setups Compact size 0 for tight fixtures Horizontal base for versatile mounting Holding force up to 700 N Max pressing force 500 N Secure, high-force clamping in a compact format The vertical clamping device No. 6800 delivers concentrated holding performance despite its reduced dimensions, providing a holding force of 700 N and a maximum pressing force of 500 N. This combination ensures secure fixation of components in high-repeatability setups, reducing slippage and rework. The compact footprint suits fixture plates and modular bedding systems where space is limited, while the vertical actuation keeps the clamping profile low. The mechanical design translates clamping input into reliable workpiece retention, which supports consistent cycle times and improved process stability. Flexible mounting and positioning with a horizontal base The integrated horizontal base permits a variety of mounting orientations on fixture plates and subplates, increasing layout options without additional adapters. The clamp offers an adjustable clamp range of 8.5–13.5 mm, allowing compensation for minor part-height variations. Dimensions such as L1 49 mm and L2 50 mm result in predictable centre distances during layout planning. Because the base sits flat, the device can be positioned beside locating elements or toolpaths without obstructing access, making it well suited to versatile jigs and progressive fixture designs. Fine adjustment and dependable mechanical interface Adjustment is achieved via the pressing screw M4 x 25, which enables controlled actuation and straightforward re-tensioning during set-up. The design tolerates a height variation between -1.5 mm and 3.5 mm, offering practical leeway for repeat setups and slight workpiece offsets. Precision features such as a defined clamp arm geometry and specified contact points (for example A = 4 mm, B = 31 mm) help maintain repeatable engagement and simplify datum alignment. These attributes support streamlined tooling changes and predictable clamping behaviour across series production or prototyping runs. Applications, efficiency and workshop integration This vertical clamp is particularly suited to toolrooms, small-batch production and fixtures for milling or drilling operations where compactness and repeatability matter. The size 0 configuration is optimised for narrow workpieces and dense fixture layouts, supporting higher part-per-fixture utilisation and shorter setup times. Integrating such a clamp into modular systems reduces the need for bespoke fixtures and contributes to a leaner tooling inventory. Confidence in workholding also minimises inspection rework, which benefits throughput and overall shop-floor productivity. For application-specific advice or to secure an AMF Vertical Clamp No. 6800 for modular fixtures, contact Metav Werkzeuge for tailored recommendations and availability — Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000833500NW Type: 6800 Product: Vertical clamp No. 6800 Size 0 horizontal foot AMF Manufacturer: AMF Packaging unit: 1 Facts Max pressing force: 500 N Max holding force: 700 N A: 4 mm B: 31 mm C: 8.5–13.5 mm D: 4.5 mm E: 14 mm F: 5.5 mm H: 18 mm H1: 81 mm HW min.: -1.5 mm HW max.: 3.5 mm I: 8 mm K: 5.5 mm L1: 49 mm L2: 50 mm M: 23 mm N: 32 mm P: 22 mm a: 95° Pressing screw: M4 x 25 Special features Size 0 configuration Horizontal foot for flat mounting Compact vertical actuation Adjustable clamp range 8.5–13.5 mm FAQ What clamping force can be expected from this device? The vertical clamp offers a maximum holding force of 700 N and a pressing force of 500 N, providing secure fixation for a wide range of small to medium components. Can the clamp accomodate different part heights? Yes, the device provides a usable height window between -1.5 mm and 3.5 mm and an adjustable clamp range of 8.5–13.5 mm for compensating minor height variations. What size and mounting orientation does the clamp require? The clamp is Size 0 and features a horizontal base, permitting flat mounting on fixture plates or subplates where compact placement is required. Which screw is used for actuation and adjustment? Actuation and fine adjustment are performed via a pressing screw M4 x 25, allowing controlled tensioning during setup. Is this clamp suitable for modular fixtures and jigs? Yes, the compact vertical design and horizontal base make it particularly suitable for modular fixture systems, toolroom jigs and dense layouts where space efficiency is essential. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
102mm Vertical Clamp With Angle Base M8 Pressure Screw 2kN Holding Force 3kN - AMF
Combine robust holding force and a compact angle base to streamline fixture changes and secure reliable clamping in demanding production environments; order the vertical clamp directly via Metav Werkzeuge or consult the specialists for application advice. Vertical clamp No. 6803, Size 4 with angle base (AMF) Vertical clamp No. 6803 Size 4 with angle base is a compact clamping element designed for fixtures and jigs, delivering measured holding power for machining and assembly applications. Vertical clamp, Size 4 Angle base for versatile mounting Pressing force up to 2,000 N Holding force up to 3,000 N Strong, measurable clamping for reliable production The vertical clamp No. 6803 provides clearly defined forces that translate directly into process reliability: a pressing force of 2,000 N and a holding force of 3,000 N. These values enable consistent workholding during milling, drilling or assembly cycles and support predictable cycle times. The integrated M8 x 65 pressure screw ensures repeatable contact pressure; explained simply, higher nominal forces reduce the risk of workpiece movement under machining loads, improving tolerances and reducing rework. Space-saving angle base that simplifies fixture design An angular mounting foot gives the clamp flexible positioning options on modular plates and dedicated jigs. With compact dimensions such as H 102 mm, H1 280 mm and a mounting angle a = 105°, the component allows close access to the workpiece and efficient use of bench or fixture space. The relatively small footprint combined with measured offsets (for example B 84 mm, P 96 mm) supports denser clamping patterns and faster tool paths, helping to increase throughput without compromising accessibility. Built for quick integration and dependable workshop use Designed as a straightforward mechanical clamping element, this vertical clamping device fits into standard fixture concepts and is supplied in a single packaging unit for immediate assembly. The clear numeric specifications aid planning and reduce setup time: designers can match clamp positions, screw sizes and force requirements without guesswork. Backed by Metav’s commitment to precision distribution from Emmerich, the component helps maintain uninterrupted supply and consistent quality across production runs. Contact Metav Werkzeuge today for tailored advice on integrating AMF vertical clamps into existing fixtures and to benefit from reliable delivery from Emmerich. Technical data Article number: 4000604351NW Manufacturer: AMF Type: 6803 Product type: Vertical clamp Execution: with angle base Facts Pressing force (max): 2,000 N Holding force (max): 3,000 N Size: 4 Pressure screw: M8 x 65 Packaging unit: 1 A [mm]: 10 B [mm]: 84 C [mm]: 32 D [mm]: 8.5 E [mm]: 54 F [mm]: 11 H [mm]: 102 H1 [mm]: 280 I [mm]: 20 K [mm]: 54 L1 [mm]: 141 M [mm]: 32 N [mm]: 52 O [mm]: 8 P [mm]: 96 a [°]: 105 Special features Angle base for flexible mounting M8 x 65 pressure screw included Compact dimensions for dense clamping arrangements Single-unit delivery FAQ What maximum forces does the clamp provide? The vertical clamp No. 6803 (AMF) specifies a pressing force of 2,000 N and a holding force up to 3,000 N for secure workholding. How is the clamp mounted to a fixture? The clamp is supplied with an angle base that enables versatile mounting; the pressure screw is M8 x 65 for mechanical fixation. Which applications suit this clamp? The clamp is suitable for jigs and fixtures in machining and assembly where compact, vertical clamping and reliable holding forces are required. Which dimensions are most relevant for layout planning? Relevant dimensions include H 102 mm, H1 280 mm, B 84 mm, P 96 mm and the mounting angle a = 105°, which are useful when planning clamp positions. What comes in the packaging? Delivery consists of one unit per packaging and the clamp as described under the product label No. 6803 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Vertical Clamp With Angle Foot, 800 N Clamping Force, 1100 N Holding Force - AMF
Take advantage of the compact Size 1 design and an angled foot for flexible fixturing, combined with reliable clamping performance—800 N pressing force and 1,100 N holding force—to keep setups secure and reduce rework. Order the vertical clamp directly via Metav Werkzeuge or consult the team for application advice. Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF — vertical clamp with angled foot, Size 1 (AMF) A Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF is a vertical clamping device intended for compact fixtures and machine-table applications where a small footprint and stable holding are required. Vertical clamp with angled foot Size 1 for compact fixture use Max clamping force 800 N Holding force up to 1,100 N Secure workholding that lowers cycle risks and scrap The vertical clamp offers a controlled combination of pressing and holding forces—800 N pressing force for active clamping and 1,100 N holding force for static retention—which translates into fewer part movements during machining and less rework. The clamping action is concentrated and predictable, making the device suitable where repeatable part location and process stability are essential. Reliable holding reduces set-up corrections and supports efficient production flows in jigs and fixtures. Compact mounting and straightforward integration Installation is simplified by the compact Size 1 geometry and the angled foot, which allows mounting in constrained spaces or at non‑orthogonal positions on fixture plates. The device is supplied with a pressure screw specified as M5 x 30, and a series of precise dimensional data (A = 5 mm; B = 34.5 mm; C = 14 mm; H1 = 125 mm; L1 = 61 mm) ensures predictable integration into assemblies. These measurable values let engineers plan clearances and fastenings in advance, avoiding on‑the‑fly adjustments and minimising downtime during set-up. Built for consistent performance and dependable sourcing Manufactured by AMF, the clamp is designed for workshop and small-scale production environments where compact, repeatable clamping is required. Paired with Metav’s distribution and quality filtering from Emmerich, purchasing this clamping device gives access to reliable stock and expert advice. The combination of a purpose‑built clamping geometry and a recognised supplier network helps maintain throughput and parts quality across serial set‑ups and bespoke jigging tasks. For tailored advice on integrating the AMF vertical clamp into existing fixtures and for supply from Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich for prompt support and reliable delivery. Technical Data Article number: 4123590100NW Type: 6803 Label: Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF Product type: Senkrechtspanner Execution: mit Winkelfuß Manufacturer: AMF Packaging unit: 1 Facts Max pressing force: 800 N Max holding force: 1,100 N A [mm]: 5 B [mm]: 34.5 C [mm]: 14 D [mm]: 4.5 E [mm]: 18 F [mm]: 7 H [mm]: 45 H1 [mm]: 125 I [mm]: 10 K [mm]: 10 L1 [mm]: 61 M [mm]: 20 N [mm]: 30 O [mm]: 5 P [mm]: 30 a [°]: 98 Pressure screw: M5 x 30 Special features Size: 1 With angled foot Pressure screw M5 x 30 Compact footprint for tight fixtures Suitable for jig and fixture mounting FAQ What clamping and holding forces does the vertical clamp provide? The Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF offers a pressing force of 800 N and a holding force up to 1,100 N, providing secure retention for many fixture tasks. How is the clamp mounted in a fixture? Mounting uses the angled foot configuration and the integrated pressure screw (M5 x 30); the dimensional data (for example L1 = 61 mm, H1 = 125 mm) supports precise placement within a jig or on a machine table. Is Size 1 suitable for compact or multi‑station fixtures? Size 1 is aimed at compact fixture designs and multi‑station arrangements where a small footprint and predictable clamping behaviour are required. Are spare or replacement pressure screws available for this clamp? The clamp uses a standard M5 x 30 pressure screw; compatible replacement screws can be specified to the same thread and length to maintain the original clamping performance. What quality assurances support this clamping device? The device is an AMF vertical clamp distributed via Metav Werkzeuge; material traceability and dimensional specification enable consistent assembly and repeatable performance in production fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base M12 x 110 Pressure Screw 3,400N Holding Force 5,500N - AMF
Benefit from a dependable combination of 5,500 N holding force, an adjustable clamping range of −2.5 to 55 mm, and a horizontal base designed for flexible mounting — ideal for secure workholding in production. Order the clamping unit directly via Metav Werkzeuge or contact our consultants for tailored integration advice. Vertical clamp No. 6800, size 6 (AMF) – vertical clamping unit with horizontal base and high holding force The Vertical clamp No. 6800, size 6 (AMF) is a vertical clamping unit for secure workholding in machining and assembly that features a horizontal base for flexible mounting and a mainspring-adjustable clamping screw for consistent contact. High holding force 5,500 N Max clamping force 3,400 N Horizontal base for flexible mounting Clamping range -2.5 to 55 mm Reliable clamping where precision matters The 6800-series vertical clamp delivers measurable security through a holding force of 5,500 N and a maximum clamping force of 3,400 N, which reduces movement during machining and minimises rework. The force specifications support consistent repeatability across batches, allowing process planners to rely on predictable results and integrate the clamp into quality-controlled production. Such measurable performance is particularly relevant for jigging, fixture work and assembly operations where precision and minimal part shift are essential. Adaptable mounting for varied set-ups A horizontal base increases the number of possible mounting orientations on machine tables and fixtures, boosting layout flexibility on the shop floor. The unit is supplied with a M12 x 110 clamping screw and offers an adjustable vertical travel, with a clamping range from −2.5 mm to 55 mm, which accommodates thin and thicker workpieces without additional shims. Because the clamp’s geometry and travel are clearly defined, engineers can plan fixture layouts and CAD models with confidence, avoiding trial-and-error during set-up. Built to streamline workshop processes Designed as size 6 in the 6800 range, the clamping unit balances compact footprint with robust capability, helping to save space on multi-station fixtures and enabling denser part placement. The solid force figures translate into fewer machine interruptions and shorter clamping cycles, improving throughput. Integration into existing tooling systems is straightforward thanks to the horizontal-foot configuration and standardised screw thread, which support quick retrofit and reduced downtime. Clear specifications for planning and procurement All relevant dimensions and mechanical limits are documented for fast incorporation into technical drawings and purchasing lists: defined travel, pin positions and angle values allow technicians to compare options objectively and select the right clamp for the task. The combination of a high holding force, a wide clamping range, and compact design simplifies decision-making when upgrading jigs or specifying new fixtures, delivering tangible production benefits such as reduced set-up time and improved process reliability. Contact Metav Werkzeuge for expert advice on integrating the AMF vertical clamp No. 6800 into production and to request additional technical documentation or CAD files — email info@metav-werkzeuge.com or call +49 2822 7131930 for dedicated support Technical data Article number: 4000604350NW Type: 6800 Label: Senkrechtspanner Nr.6800 Gr.6 waagrechter Fuß AMF Execution: with horizontal base Brand: AMF Packaging unit: 1 Facts Max. clamping force: 3,400 N Max. holding force: 5,500 N Clamping screw: M12 x 110 A [mm]: 14 B [mm]: 165.5 C [mm]: 50.5 D [mm]: 13 E [mm]: 89 F [mm]: 28 H [mm]: 81 H1 [mm]: 333 HW min. [mm]: -2.5 HW max. [mm]: 55 I [mm]: 30 K [mm]: 24.5 L1 [mm]: 231 L2 [mm]: 206 M [mm]: 67.5-72.5 N [mm]: 100 P [mm]: 90 a [°]: 140 Special features Size: 6 Horizontal base Clamping range (HW): −2.5 mm to 55 mm Angle a: 140° Adjustable M dimension: 67.5–72.5 mm Includes standard M12 clamping screw FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 5,500 N, providing secure retention for demanding machining and assembly tasks. Which clamping travel does the unit support? The vertical travel covers a clamping range from −2.5 mm to 55 mm, allowing workholding of both thin and relatively thick components. Is the product compatible with standard fixture threads? Yes, the unit is supplied with an M12 x 110 clamping screw and is intended for integration with standard fixture layouts. How is the item identified for ordering and documentation? Refer to the article number 4000604350NW and the type 6800 when ordering or requesting CAD data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Foot Size 4, Max Thrust 1,700N - AMF
Take advantage of the compact footprint, robust horizontal base and clear force ratings to ensure stable, repeatable workholding. With a size 4 design and an M8 x 65 clamping screw, this vertical clamp delivers reliable clamping and secure holding force for fixtures and jigs — order directly via Metav Werkzeuge or consult the team for application advice. Vertical clamp No. 6800 — vertical clamping unit with horizontal foot by AMF The Vertical clamp No. 6800 is a compact vertical clamping device with a horizontal base, designed for secure workholding in fixtures and assembly jigs across light to medium industrial applications. Size 4 vertical clamp for compact fixtures Horizontal foot for stable mounting Holding force 3,000 N for secure workholding Stable clamping that improves process reliability The clamp offers a clearly specified clamping force of 1,700 N and a holding force of 3,000 N, which translates directly into dependable part security during machining, assembly and quality checks. The specified forces enable planners to calculate safety margins and fixture layouts without guesswork, improving throughput and reducing rework. The horizontal foot reduces the required mounting space and provides a low centre of gravity, making the unit suitable where rigidity and a small footprint are priorities. Technical planners will appreciate the M8 x 65 clamping screw, which is industry-standard and simplifies replacement and integration. Precise dimensions for predictable integration Key dimensions are provided for straightforward CAD integration and fixture design: A 10 mm, B 101 mm, C 32 mm, H1 221 mm and an adjustable stroke range HW -6 mm to 22.5 mm. These measures support accurate clash checks and modular fixture planning, while the size 4 classification helps in selecting matched components across a clamping system. The angular orientation at 105° and the compact lateral dimensions contribute to flexible positioning options in constrained tooling spaces. Clear dimension data reduces engineering iterations and accelerates time to first part. Robust build for industrial use and easy maintenance Constructed for everyday workshop and production use, the unit combines a robust base with straightforward mechanical actuation. The mechanical design emphasises repeatability and low-maintenance operation: simple mechanical interfaces and a standard clamping screw minimise downtime for servicing. Where regular inspection is required, the accessible geometry and common fastener sizes make routine checks and part replacement efficient. The component’s specification supports consistent performance under cyclic loading, ensuring longevity and stable fixture behaviour over many production cycles. Versatile application across fixtures and jigs Designed for clamping tasks in assemblies, inspection fixtures and small machining stations, this vertical clamp integrates into modular systems and bespoke jigs alike. The combination of compact footprint and strong holding force makes it suitable for securing components during drilling, light milling, assembly tasks and transfer processes. The horizontal mounting option facilitates direct attachment to base plates or subplates and simplifies alignment in stacked or multi-level fixture assemblies. For applications where force and space constraints must be balanced, this clamping unit offers a practical, engineering-led solution. Discuss mounting options and order the AMF vertical clamp No. 6800 via Metav Werkzeuge for reliable fixture performance — specialists are available to advise on integration and compatibility Technical data Article number: 4000833504NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Facts Max clamping force: 1,700 N Max holding force: 3,000 N Size: 4 A: 10 mm B: 101 mm C: 32 mm D: 8.6 mm E: 54 mm F: 16 mm H: 42.5 mm H1: 221 mm HW min.: -6 mm HW max.: 22.5 mm I: 20 mm K: 13 mm L1: 141 mm L2: 130 mm M: 43.5–46.5 mm N: 64 mm P: 53 mm a: 105° Special features With horizontal foot Clamping screw M8 x 65 Packaging unit: 1 FAQ What is the maximum holding force of this clamp? The maximum holding force is 3,000 N for the Vertical clamp No. 6800, providing secure retention for typical fixture applications. Can the stroke be adjusted for different part heights? Yes, the clamp offers an adjustable stroke range (HW) from -6 mm to 22.5 mm to accommodate varying component heights. Is the clamping screw a standard size for easy replacement? The unit uses an M8 x 65 clamping screw, a common size that simplifies maintenance and spare-part sourcing for the AMF vertical clamp No. 6800. Which applications suit this vertical clamp? The clamp is suitable for jigs, fixtures and light machining or assembly tasks where a compact vertical clamping solution with a horizontal mounting base is required. Are full dimensions available for CAD integration? Yes, detailed dimensions including A, B, C, H1 and others are provided for seamless CAD integration and fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp with Horizontal Foot, Max Clamp Force 600 N, Retaining Force 1100 N - AMF
Take advantage of the compact Size 1 format and the combination of a horizontal foot with proven holding and clamping forces (up to 1,100 N holding and 600 N clamping) for secure fixture tasks. Order supply or request specification advice directly via Metav Werkzeuge for a reliable workshop solution. AMF Vertical Clamp No. 6800 — vertical clamp with horizontal foot, Size 1 AMF Vertical Clamp No. 6800 provides robust vertical clamping with a horizontal mounting option for fixtures and jigs in production and assembly environments. Horizontal foot for flexible mounting Clamping force up to 600 N Holding force up to 1,100 N Compact Size 1 for tight fixtures Consistent clamping and measurable performance The device delivers a clamping force of 600 N and a holding force of 1,100 N, values that translate directly into dependable part retention during machining, assembly or inspection operations. Specified forces are particularly useful where repeatable clamping performance is required; the difference between clamping and holding figures helps to understand dynamic versus static load capacities. The integrated M5 x 30 pressure screw enables fine adjustment of contact force, allowing precise set-up on fixtures where controlled pressure is critical for part integrity. Flexible mounting and clear dimensional data Designed with a horizontal foot, the clamp adapts to a variety of fixture geometries without compromising accessibility above the workpiece. Key dimensions such as A = 5 mm, B = 39 mm, C = 16 mm and H1 = 98.5 mm support straightforward planning when integrating the clamp into existing tooling plates or bespoke jigs. The mechanical travel range (HW min. -4 mm / HW max. 2 mm) gives an understanding of adjustable engagement depth; this is helpful when compensating for part tolerances or surface irregularities in assembly processes. Suited to industrial use and straightforward handling The compact construction of the clamp (Size 1) and its clear mechanical interface simplify handling during set-up and maintenance. The design focus on measurable parameters reduces uncertainty in procurement and engineering documents: fixtures benefit from a component whose capabilities are stated in Newtons and millimetres rather than vague descriptors. Where higher throughput and repeatability matter, the clamp’s specification supports process consistency and reduces rework due to insecure clamping. Integration benefits and supply confidence Choosing a standardised clamping element with defined mechanical data supports faster fixture design cycles and easier spare-part management. The clamp matches well with modular fixturing systems and can be incorporated into subassemblies where a low-profile, vertically acting clamp is required. Metav Werkzeuge supplies the component with full logistical support from Emmerich, adding supply-chain transparency and a single-source option for workshop procurement. Arrange supply of the AMF vertical clamp (Size 1, horizontal foot) via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery planning Technical data Article number: 4000833501NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Packaging unit: 1 Facts Clamping force max: 600 N Holding force max: 1,100 N Size: 1 A: 5 mm B: 39 mm C: 16 mm D: 4.5 mm E: 18 mm F: 6 mm H: 19 mm H1: 98.5 mm HW min.: -4 mm HW max.: 2 mm I: 10 mm K: 5.5 mm L1: 61 mm L2: 59 mm M: 22.5–26 mm N: 34 mm P: 27 mm a: 95° Special features Pressure screw M5 x 30 Compact Size 1 form factor Horizontal-foot mounting for fixture versatility Clear Newton- and millimetre-based specifications FAQ What maximum clamping and holding forces does this clamp provide? The clamp offers a clamping force of up to 600 N and a holding force of up to 1,100 N, values suitable for many light- to medium-duty fixturing tasks. Is the horizontal foot suitable for use on existing fixture plates? Yes, the horizontal foot design allows straightforward attachment to common fixture plates and modular fixturing systems, facilitating integration into existing tooling. Which adjustment screw is used for contact pressure? The unit uses an M5 x 30 pressure screw for setting and fine-tuning the contact pressure. What travel range is available for adjustment at the clamping interface? The adjustable engagement range is indicated as HW min. -4 mm to HW max. 2 mm, allowing compensation for part height variations. Is the clamp suitable for automated assembly processes? The compact dimensions and defined force ratings make the clamp appropriate for many automated and semi-automated setups where vertical clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Vertical Clamp Automatic Clamping Height Adjustment, 1100N - BESSEY
Take advantage of a compact, dependable clamping solution that combines automatic clamping height adjustment, a horizontal base foot for stable mounting and a reliable 1,100 N clamping force — ideal for speeding up light assembly and repeatable workholding. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Senkrechtspanner STC-VH Gr.20 – Vertical clamp with horizontal base foot and automatic height adjustment (BESSEY) The Senkrechtspanner STC-VH Gr.20 is a vertical clamp with a horizontal foot, designed for precise, repeatable workholding in light-duty assembly and workshop environments. Automatic clamping height adjustment Max. clamping force 1,100 N Clamping height H1 129 mm Horizontal base foot for stable mounting Consistent hold and measurable performance for efficient production The compact vertical clamp delivers repeatable clamping through its automatic clamping height adjustment, which eliminates manual readjustment between different workpieces and reduces setup time. With a rated 1,100 N of clamping force and an H1 clamping height of 129 mm, the unit provides a verifiable performance envelope that supports predictable cycle times. Described in clear numerical terms, these values let planners and workshop managers compare the clamp directly with alternative workholding solutions and therefore make an evidence-based selection for small-batch production or fixture work. Stable mounting and compact footprint for tight workspaces Featuring a horizontal base foot, the clamping unit mounts securely to benches and fixtures while keeping the vertical profile compact. At only 0.22 kg in mass and specified as size 20, the design minimises added load on jigs and simplifies handling during fixture changes. The low weight and small footprint are especially beneficial where multiple clamps are required on a single jig, enabling closer spacing without loss of stability. This combination supports efficient use of bench space and helps maintain ergonomic access for operators during assembly or inspection tasks. Straightforward operation that reduces setup complexity The automatic height regulation reduces operator steps: no manual shim stacking or repeated measurement is needed to obtain consistent clamping points. For workshops and small production lines, this translates into faster cycle preparation and fewer sources of variation. The device’s simple mechanical principle makes maintenance straightforward and predictable, lowering downtime risks and keeping throughput steady. Where accuracy and speed are priorities, the simplified workflow contributes directly to measurable productivity gains. Durable design and trusted brand background for reliable service life Built under the BESSEY designation and intended for general workshop use, the clamp emphasises durability and dependable function over time. The vertical clamping mechanism is engineered to withstand repetitive use common in assembly, prototyping and light fixture applications. Its robust clamping force and compact design provide peace of mind concerning safety and consistency, while supporting operators who need a reliable fixture element that performs without frequent adjustment. Contact Metav Werkzeuge today for tailored advice on integrating the BESSEY vertical clamp into existing fixtures or to arrange supply directly from Emmerich. Technical data Article number: 4000831136NW Type: STC-VH Label: Senkrechtspanner STC-VH Gr.20 waagrechter Fuß BESSEY Manufacturer: BESSEY Facts Weight: 0.22 kg Clamping height H1: 129 mm Max. clamping force: 1,100 N Packaging unit: 1 Special features Automatic clamping height adjustment Horizontal base foot Size 20 Product type: Vertical clamp (Senkrechtspanner) FAQ What maximum clamping force does the clamp provide? The Senkrechtspanner STC-VH Gr.20 provides a maximum clamping force of 1,100 N, suitable for light to medium holding tasks in assembly and fixture work. Which clamping height is available for this model? The clamp has a specified clamping height H1 of 129 mm, enabling consistent positioning across repeated workpieces. Is the clamp suitable for tight fixture layouts? Yes, the compact design and horizontal base foot make the unit appropriate for close spacing in jigs and benches, while its low mass of 0.22 kg minimises added load. How does the automatic height adjustment benefit production? Automatic height regulation reduces manual setup steps and repeat measurements, improving throughput and reducing variability in clamping position for repetitive workflows. Which brand manufactures this vertical clamp? This vertical clamp is supplied under the BESSEY designation and is intended for workshop and light assembly applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3mm Vertical Clamp With Angle Base, Max Clamping Force 2,500 N, Max Thrust 1,400 N - AMF
Take advantage of the combination of compact design, high holding performance and easy integration for reliable fixture setups; the vertical clamp delivers a maximum holding force of 2,500 N and a clamping force of 1,400 N, supplied with an angled foot and an M8 x 45 pressure screw. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp No. 6803, Size 3 – Angled foot (AMF) A Vertical clamp No. 6803 engineered for secure workholding in machining and fixture assemblies, supplied with an angled foot for flexible mounting. High holding force 2,500 N Maximum clamping force 1,400 N Angled foot for versatile mounting Includes M8 x 45 pressure screw Secure clamping power that improves process reliability The clamp offers robust holding performance, with a rated holding force of 2,500 N and a maximum clamping force of 1,400 N, ensuring components remain stable during cutting, drilling and light milling operations. These figures translate into fewer re-clamps and fewer rejected parts, which supports higher first-pass yield and steadier throughput. The integrated pressure screw (M8 x 45) provides consistent actuation force for repeatable set-ups, while the standardised Size 3 footprint simplifies replacement in existing fixtures. Flexible mounting and compact footprint for tighter fixtures Equipped with an angled foot, the device enables alternative mounting orientations where vertical space or access is restricted. The compact dimensions and standardised attachment points allow the unit to be positioned close to the workpiece without obstructing tools, reducing setup times and improving access for operators. The angled base design supports versatile clamping geometries in jigs and modular fixturing systems, increasing layout options on small and medium-sized workbenches. Fast integration into workshop workflows Designed for industrial and trade environments, the vertical clamp integrates into common fixture plates and modular tooling with minimal adjustment. The simple mechanical construction reduces maintenance needs and keeps downtime low; the pressure screw and mounting points follow familiar standards to ease retrofitting. By delivering consistent clamping force and rapid installation, the clamp contributes to shorter cycle planning and greater operational predictability on the shop floor. Suitable applications and compatibility The clamp is intended for general fixturing duties in metalworking and assembly contexts where reliable vertical holding is required. Typical applications include small-batch machining, fixture prototyping and repetitive assembly stations. Its Size 3 specification and compact geometry make it particularly suited to workshops and production lines that prioritise adaptable, space-efficient clamping solutions rather than large, fixed vices. For tailored fixturing recommendations or to place an order for the AMF vertical clamp No. 6803, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with integration and application details Technical data Article number: 4123590130NW Type: 6803 Product: Vertical clamp, Size 3, angled foot Manufacturer: AMF Facts Max clamping force: 1,400 N Max holding force: 2,500 N Size: 3 Packaging unit: 1 Pressure screw: M8 x 45 Angle a: 105° H: 71 mm H1: 223 mm L1: 111 mm Special features Angled foot for flexible mounting Standardised Size 3 dimensions Compact footprint for tight fixtures Repeatable clamping with M8 x 45 pressure screw FAQ What maximum forces can the clamp handle? The vertical clamp delivers a maximum clamping force of 1,400 N and a holding force up to 2,500 N, suitable for secure fixturing in many machining tasks. Is the angled foot suitable for horizontal plates? Yes, the angled foot provides alternative mounting angles and is designed to fit on standard fixture plates, enabling compact and adaptable placement. Which pressure screw is supplied with the clamp? The unit is supplied with an M8 x 45 pressure screw as standard to ensure consistent actuation and repeatable clamping behaviour. Can this clamp be used in modular jig systems? The Size 3 standardised dimensions make the clamp compatible with many modular fixturing systems and straightforward to integrate into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 Size Vertical Clamp With Horizontal Foot M12 x 80 Actuating Screw, 3,000 N Clamping Force - AMF
Combine a 5,000 N holding force with a compact mount and horizontal foot for reliable, repeatable clamping in jig and fixture applications; purchase or request advice via Metav Werkzeuge. Vertical clamp No. 6800 (Size 5) – horizontal foot, AMF The Vertical clamp No. 6800 is a robust vertical clamping device designed for fixtures and jigs where a horizontal mounting base is required for secure, compact installation. High holding force 5,000 N Max clamping force 3,000 N Horizontal foot for secure mounting M12×80 pressure screw included Consistent clamping performance for production use The clamp delivers a clear separation between clamping force and holding force, with a clamping capability of up to 3,000 N and a maximum holding capacity of 5,000 N. This distinction matters in practice: the clamping force refers to the active force applied by the pressure screw, whereas the holding force indicates the maximum static load the device can withstand once engaged. Such rated values make the device suitable for repetitive fixture work and moderate machining operations where stable workholding is essential. The repeatable action of the mechanism supports cycle-based production and reduces setup variability. Flexible installation and precise height adjustment Equipped with a horizontal foot, the design allows mounting on flat fixture plates or machine tables without bulky offsets. The integrated M12×80 pressure screw provides standardised actuation and easy replacement. Adjustable parameters include the clamping height range (HW min –3 mm to HW max 27.5 mm) and an adjustable jaw travel (L: 26.5–31.5 mm), enabling adaptation to thin and thicker workpieces alike. Key dimensions such as B: 140 mm, H: 55.8 mm and H1: 281 mm contribute to a compact footprint that saves valuable table space while maintaining accessibility for toolpaths and loading. Designed for workshop reliability and quick integration The vertical clamp suits toolrooms, small-batch production and assembly jigs where robust hold and simple mechanics are preferred. With a clear mechanical concept and standard components, maintenance remains straightforward and downtime is reduced. The unit ships as a single item (packaging unit 1) ready for immediate integration into existing fixtures. With defined numerical limits and standardised fastenings, the clamp offers planners and engineers predictable behaviour across repeated cycles, supporting both manual and automated clamping sequences. For dependable clamping from AMF, order the Vertical clamp No. 6800 via Metav Werkzeuge or contact Metav Werkzeuge for configuration advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4000833505NW Type: 6800 Product: Vertical clamp No. 6800 (Size 5) Execution: with horizontal foot Manufacturer: AMF Packaging unit: 1 Dimensions & forces A: 14 mm B: 140 mm C: 45 mm D: 8.5 mm E: 73 mm F: 34 mm H: 55.8 mm H1: 281 mm HW min: -3 mm HW max: 27.5 mm I: 25 mm K: 9.5 mm L: 26.5–31.5 mm L1: 195 mm L2: 185 mm M: 45–50 mm N: 70 mm P: 65 mm a: 115° Max clamping force: 3,000 N Max holding force: 5,000 N Features & design M12×80 pressure screw Horizontal foot for mounting Adjustable clamping height range Compact footprint for fixture plates Stroke and length ranges for fine adjustment FAQ What is the maximum holding and clamping force of this clamp? The vertical clamp No. 6800 (AMF, SKU 4000833505NW) provides a maximum holding force of 5,000 N and a clamping force up to 3,000 N. Can the clamp be mounted on standard fixture plates? Yes; the horizontal foot is intended for mounting on flat fixture plates or machine tables and supports compact installation without large offsets. What adjustment ranges are available for clamping height and jaw travel? Clamping height is adjustable from HW min –3 mm to HW max 27.5 mm; jaw travel L is adjustable between 26.5 mm and 31.5 mm to accommodate varying workpiece thicknesses. Is a pressure screw supplied and what size is it? The device includes an M12×80 pressure screw as specified in the technical details for standardised actuation. Which applications suit this vertical clamp? The clamp is suitable for jigs, fixtures and repetitive production tasks where secure, repeatable holding is required and a horizontal mounting base is preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Vertical Clamp Automatic Height Adjustment, 2,500 N - BESSEY
Take advantage of a compact, workshop-ready solution that combines automatic clamp height adjustment with a reliable 2,500 N clamping force for consistent part retention; order directly via Metav Werkzeuge or consult the team for specification matching. BESSEY STC-VH Group 50 Vertical Clamp – automatic clamp height adjustment, horizontal base The BESSEY STC-VH Group 50 vertical clamp is a compact clamping device with a horizontal foot designed for stable mounting in fixtures and jigs; ideal for repeatable positioning and secure clamping in metalworking and general workshop applications. Automatic clamp height adjustment Max clamping force 2,500 N Horizontal base for flat mounting Size 50 with H1 = 162 mm Consistent, measurable clamping performance for production use The vertical clamping mechanism delivers a maximum clamping force of 2,500 N, ensuring secure retention of workpieces during machining, welding or assembly processes. The automatic clamp height adjustment compensates for minor variations in component thickness, reducing setup time and the need for shims. For procurement and shop-floor planners, the combination of precise force rating and self-adjusting height translates into fewer interruptions, less rework and a predictable throughput rate. Technical novices benefit from a simple performance indicator: higher Newton values mean firmer hold; this model offers industrial-grade holding power in a compact footprint. Quick installation and stable mounting reduce downtime Fitted with a horizontal base, the clamp is intended for flat mounting on worktops, plates or modular fixturing systems, enabling a rapid mechanical interface with common workshop fixtures. The Size 50 designation and the H1 dimension of 162 mm give a clear reference for integration into existing set-ups and CAD layouts. Fast mounting and predictable geometry shorten the time between design and production, while the modest mass of 0.43 kg per unit keeps handling and changeover simple. The overall result is improved operational efficiency: fewer steps to secure a part and faster transitions between operations. Robust, straightforward design for everyday reliability Built for regular workshop use, the unit combines durability with uncomplicated maintenance: the automatic height-compensation function eliminates frequent manual adjustments, and the compact construction withstands the rigours of daily handling. The clamp’s straightforward mechanism helps minimise training needs for operators and supports consistent process quality. Where traceable performance matters, the clear values for clamping force and H1 height allow engineering teams to specify fixtures with confidence and document expected results for quality control. Choose the BESSEY STC-VH Group 50 vertical clamp for dependable clamping performance and straightforward integration — contact Metav Werkzeuge for tailored advice or to confirm fitment for existing fixtures. Technical data Article number: 4000831137NW SKU: 4000831137NW Type: STC-VH Product type: Vertical clamp Label: Senkrechtspanner STC-VH Gr.50 horizontal foot BESSEY Manufacturer: BESSEY Packaging unit: 1 Weight: 0.43 kg Core technical data Maximum clamping force: 2,500 N Size: 50 H1: 162 mm Special features Automatic clamp height adjustment Horizontal base (waagrechter Fuß) Compact workshop mounting design FAQ What clamping force can be expected from this clamp? The BESSEY STC-VH Group 50 vertical clamp provides a maximum clamping force of 2,500 N, suitable for secure retention in many metalworking and assembly tasks. Is the clamp suitable for variable workpiece thicknesses? Yes, the automatic clamp height adjustment built into the STC-VH allows compensation for minor variations in part height without manual shim work. How is the clamp mounted? The unit features a horizontal base for flat mounting on plates or fixture rails; the Size 50 and H1 = 162 mm dimensions simplify integration into existing setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Vertical Clamp With Angle Base Size 2, Max Hold 1200 N - AMF
Take advantage of the compact size, reliable holding force and straightforward mounting options to maintain stable workholding in fixtures and jigs. Order directly via Metav Werkzeuge or request a detailed quote for integration into production workflows. Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF – Vertical clamp, angled foot, size 2, robust holding The Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF is a vertical clamping element designed for secure, repeatable workholding in jigs, fixtures and machine set-ups where space and stability are critical Vertical clamp, size 2 with angled foot Holding force 1,200 N Maximum pressing force 1,000 N Pressure screw M6 x 35 Consistent clamping performance for reliable production The vertical clamping element delivers stable holding force under intermittent loads, with a specified holding force of 1,200 N and a maximum pressing force of 1,000 N, ensuring components remain immobile during machining or inspection. These figures describe the mechanical capacity and help assess cycle reliability: the holding value designates the sustained grip, while the pressing force indicates the maximum actuation load the unit can tolerate. For production planners, this translates into predictable fixture behaviour, reduced rework and fewer stoppages owing to part movement. Compact angled foot for flexible fixture design The integrated angled foot provides a low-profile mount that simplifies positioning in confined jigs and on modular tooling plates. Key dimensions support straightforward planning: H1 167 mm overall height reference, L1 77 mm base length and aileron-related measures for accurate siting. The supplied pressure screw M6 x 35 enables secure actuation without additional custom fasteners. These physical details assist in CAD integration and reduce trial‑and‑error during assembly, allowing the clamping element to be incorporated into space-constrained set-ups while maintaining ergonomic access for actuation and inspection. Practical compatibility and application contexts Designed as a general-purpose vertical clamp for clamping technology applications, the unit suits short-run and serial production tasks where repeatability and compactness matter. The size designation indicates a medium-small profile appropriate for small fixtures, component testing rigs and manual assembly stations. Where higher clamping forces are unnecessary, the clamp provides an efficient balance between grip and footprint, supporting quicker changeovers and simpler fixture layouts. Material-specific recommendations cannot be inferred from the data provided; selection should be confirmed against the component material and cutting or handling forces expected in the process. Request a tailored quotation or technical datasheet from Metav Werkzeuge for integration planning and spare-part matching; Metav Werkzeuge can advise on fixture compatibility and delivery from stock in Emmerich. Technical Data Article number: 4123590120NW Product type: 6803 Label: Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF Manufacturer: AMF Facts Size: 2 Maximum pressing force: 1,000 N Holding force: 1,200 N Pressure screw: M6 x 35 H1: 167 mm L1: 77 mm Special features With angled foot a [°]: 105 Packaging unit: 1 A [mm]: 6 B [mm]: 41 C [mm]: 20 D [mm]: 6.1 E [mm]: 25 F [mm]: 6 H [mm]: 60 I [mm]: 12 K [mm]: 6 M [mm]: 25.5 N [mm]: 37 O [mm]: 5 P [mm]: 32 FAQ What is the primary application for this vertical clamp? The vertical clamp is intended for secure workholding in jigs, fixtures and machine set-ups where a compact size 2 clamp with an angled foot provides space‑efficient mounting and reliable part retention. Which forces should be considered when specifying the clamp for a fixture? Consider the holding force of 1,200 N and the maximum pressing force of 1,000 N as the key mechanical parameters when designing fixtures with this AMF vertical clamp (SKU 4123590120NW). Is the pressure screw included and what are its specifications? The unit is supplied with a pressure screw M6 x 35, which enables direct installation and actuation without additional fasteners for many standard fixtures. Can this clamp be integrated into existing modular tooling plates? Yes, the angled foot and the compact footprint make the clamp suitable for integration into modular plates; plan using the provided dimensional values such as H1 167 mm and L1 77 mm for precise CAD placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Senkrechtspanner Gr.50 BESSEY
zum Einsatz auf Multifunktionstischen wie z.B. Festool MFT und Sortimo WorkMo mit Lochdurchmesser 20 mm und Plattenstärke von min. 19 mm bis max. 25 mm Weitere technische Eigenschaften: · F1: 2,5kN · Spannweite: 40mm
Size 2 Vertical Clamp With Horizontal Foot, Max Clamping Force 1200 N, Max Pressure 800 N - AMF
Take advantage of the combination of compact design and dependable clamping performance — the horizontal base and max. clamping force 800 N ensure secure workholding in confined fixtures; order through Metav Werkzeuge or consult our specialists for application advice. AMF Vertical clamp No. 6800 — Size 2 with horizontal base The Vertical clamp No. 6800, size 2, with a horizontal base, is a compact workholding device for fixtures and jigs, designed to deliver repeatable clamping and reliable positioning in machining and assembly operations. Vertical clamp with horizontal base Size 2 for compact fixtures Max. clamping force 800 N Holding force up to 1,200 N Reliable clamping power for compact fixtures The clamp is engineered to provide consistent clamping performance in restricted spaces where conventional clamps are too large. With a max. clamping force 800 N and a rated holding force 1,200 N, the mechanism secures components during light to medium machining and assembly tasks. The design converts operator input into a stable vertical clamping action so that the part is held firmly while machining forces are applied. The compact footprint and the horizontal base make the device especially suitable for modular fixtures, single-station jigs and repeat production set-ups where space optimisation and predictable clamping behaviour are required. Clear adjustment and straightforward integration into fixtures Adjustment is simple and measurable: the clamp includes an M6 x 35 pressure screw and an adjustable range of 23–31 mm, which enables a controlled contact travel for diverse part heights. Mounting dimensions such as A, B and L1/L2 are provided for accurate integration into existing fixture plates, while the horizontal foot supports straightforward bolting and alignment. The clamp’s geometry, including a clamping angle of 105°, supports reliable engagement and repeatable positioning, which reduces set-up time and aids process stability in serial production. Low-maintenance durability for everyday shop use Built for routine use, the unit delivers predictable behaviour over many cycles and requires minimal intervention. Because clamping and holding capacities are specified, selection is simplified and process failure risk is reduced; the specified holding force 1,200 N indicates the static retention capability under operational load. The mechanical design focuses on robustness and serviceability so that maintenance is straightforward and downtime is minimised, supporting continuous production in workshops and light industrial environments. Where this clamp brings the greatest benefit The vertical clamp is well suited to assembly benches, small machining centres and dedicated jigs where a horizontal base is advantageous for mounting and alignment. Its compact size and measurable adjustment make it a practical option for fixture builders, maintenance workshops and production technicians seeking a dependable, space-saving clamping solution. Specifying this clamp helps standardise workholding across stations and simplifies spare-part inventories for small to medium-sized production runs. Contact Metav Werkzeuge for application support and availability of the AMF Vertical clamp No. 6800 (SKU 4000833502NW); specialists at Metav in Emmerich can advise on fixture integration and delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833502NW Type: 6800 Product: Vertical clamp No. 6800 size 2, horizontal base Manufacturer: AMF Execution: with horizontal base Packaging unit: 1 Numeric data Max. clamping force: 800 N Max. holding force: 1,200 N Pressure screw: M6 x 35 A: 6 mm B: 52 mm C: 20 mm D: 5.5 mm E: 25 mm F: 11 mm H: 23 mm H1: 139.5 mm HW min.: -3 mm HW max.: 4.5 mm I: 12 mm K: 6 mm L: 12.5 mm L1: 78 mm L2: 89 mm M: 23–31 mm N: 43 mm P: 32 mm a: 105° Special features Horizontal base Size 2 Adjustable clamping range 23–31 mm Clamping angle 105° Compact design for fixtures and jigs FAQ What is the clamping capacity of this vertical clamp? The AMF Vertical clamp No. 6800 (SKU 4000833502NW) provides a maximum clamping force of 800 N and a holding force rated at 1,200 N. Can the clamp accommodate different part heights? Yes, the device features an adjustable range of 23–31 mm (M = 23–31 mm) and an M6 x 35 pressure screw for fine setting of contact travel. Is the clamp suitable for compact fixture plates? The horizontal base and compact Size 2 format are designed for integration into small fixtures and jig plates where space is limited. Which mounting dimensions are relevant for fixture integration? Key dimensions such as A, B, L1 and L2 (for example A = 6 mm, B = 52 mm, L1 = 78 mm, L2 = 89 mm) are provided to ensure accurate placement and alignment in the fixture design. What angle does the clamp operate at and why does that matter? The clamp operates at a clamping angle of 105°, which supports reliable engagement and helps maintain part position under machining or assembly forces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Size 3 Vertical Clamp Horizontal Foot With M8 x 45 Pressure Screw, 1200 N Closing Force - AMF
Take advantage of a compact design with a horizontal mounting foot and strong, verifiable forces for reliable fixture applications; the combination of 1,200 N clamping force and 2,500 N holding force supports secure, repeatable operations. Order the clamp directly via Metav Werkzeuge or consult Metav's technical advisors for integration guidance. AMF Vertical Clamp No. 6800 (Size 3) – horizontal foot, 1,200 N clamping force The Vertical clamp No. 6800 (size 3) is a compact, industrial-grade vertical clamping element with a horizontal base, designed for secure positioning and retention of workpieces in fixtures, jigs and assembly stations. Vertical clamp No. 6800, size 3 Horizontal foot for stable mounting Max clamping force 1,200 N Max holding force 2,500 N Reliable clamping performance that reduces rework The clamp delivers a clamping force of 1,200 N and a holding force of 2,500 N, values that translate into measurable stability during machining and assembly. Higher holding force reduces vibration and part movement, which in turn lowers scrap rates and rework. The forces are stated to provide objective comparability when selecting components for precision fixtures; use of a verifiable numeric specification supports predictable cycle outcomes and process planning. Stable installation thanks to the horizontal mounting foot A dedicated horizontal foot provides a low-profile mounting option that is suited to confined fixturing layouts and modular fixture plates. The size 3 format keeps the unit compact while allowing robust anchoring to plates or sub-frames, so machining centres and manual workstations benefit from a smaller footprint without sacrificing stability. The horizontal base also simplifies alignment during assembly, enabling quicker fixture set-up and more consistent part orientation. Fine adjustment and secure contact for varying workpiece heights Adjustment is realised via a pressure screw specified as M8 x 45, allowing precise contact pressure and repeatable clamping positions. The effective clamping range of 2–11 mm supports thin to moderate section workpieces, while a defined contact angle of 105° aids guided engagement under load. These characteristics enable controlled contact force distribution, making the clamp suitable where repeatability and gentle—but firm—retention are required. Integration into fixtures and faster set-up times The compact geometry and standardised fixing points allow straightforward fixture integration, reducing engineering time for bespoke sub-assemblies. Short set-up times and predictable clamping behaviour contribute directly to reduced setup time at the machine or station. Where multiple clamps are used across a production cell, consistent mechanical behaviour simplifies trial set-ups and shortens validation runs for new components. Sourcing confidence and workshop support for precision needs Metav combines a broad product range with a practical logistics base in Emmerich, so enquiries for fixture layouts or part matching are supported by decades of application experience. The availability of tested clamping elements together with local supply reliability helps workshops and production managers achieve consistent measurement and handling standards. Metav's position as a precision partner provides an added layer of assurance for procurement and operations planning. For secure, repeatable clamping in fixtures, contact Metav Werkzeuge for ordering and technical advice — info@metav-werkzeuge.com or +49 2822 7131930 — and request guidance for integrating the AMF Vertical Clamp No. 6800 (SKU 4000833503NW) into production. Technical data Article number: 4000833503NW Type: 6800 Brand: AMF Execution: horizontal foot Packaging unit: 1 Facts Max clamping force: 1,200 N Max holding force: 2,500 N Size: 3 A: 8 mm B: 79 mm C: 20 mm D: 7.5 mm E: 37 mm F: 19 mm H: 33 mm H1: 186 mm HW min: 2 mm HW max: 11 mm I: 18 mm K: 7.5 mm L1: 112 mm L2: 112 mm M: 32.5 mm N: 46 mm P: 35 mm a: 105° Special features Horizontal mounting foot for low-profile installation Pressure screw M8 x 45 Compact size suitable for fixtures and jigs Clear clamping and holding force specifications Packaging unit 1 FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 1,200 N; the AMF Vertical Clamp No. 6800 (type 6800, SKU 4000833503NW) is specified with this force to allow objective selection for fixtures. Which workpiece thicknesses can be clamped reliably? The effective clamping range is 2–11 mm, so the unit is suited to thin to moderate section workpieces while maintaining secure contact through the M8 x 45 pressure screw. Is the horizontal foot suitable for modular fixture plates? Yes, the horizontal foot is designed for stable mounting on plates and sub-frames, facilitating modular fixture integration and consistent alignment. How does the clamp improve set-up times in production? Consistent clamping behaviour and standard fixing dimensions help reduce adjustment and validation time; using the AMF Vertical Clamp No. 6800 across a cell simplifies repeatability and shortens set-up procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com