30mm Closure Plug Z2 DIN 69880 VDI30 Form Z2, 20mm A / 68mm D - TECWERK
Take advantage of a standardised interface and precise dimensional control to ensure consistent toolholder sealing in production. The combination of Form Z2 compatibility and clearly specified seat dimensions supports dependable installation and process repeatability; order directly via Metav Werkzeuge or consult the technical team for specification advice. TECWERK closure plug Z2 for DIN 69880 / VDI30 — compact sealing for VDI30 toolholders TECWERK closure plug Z2 for DIN 69880 / VDI30 is a purpose-made blanking device designed for the VDI30 interface and intended to give a precise mechanical fit in standardised toolholders. Form Z2 for VDI30 toolholders d1 30 mm for precise seat A 20 mm insertion depth D 68 mm overall diameter Precise interface compatibility reduces set-up uncertainty The closure component is engineered to meet the geometric demands of the VDI30 interface as referenced in DIN 69880, which ensures repeatable seating across compatible toolholders. With a nominal d1 30 mm seat and an A 20 mm insertion depth, the part provides a defined engagement that minimises radial play and positional variance. This dimensional transparency supports predictable set-up times and reduces the need for iterative adjustments on the machine spindle, contributing to higher first-pass accuracy on subsequent tool changes. Clear dimensional data enables straightforward planning Specification-driven procurement is simplified by the explicit measurements: D 68 mm overall diameter and the listed engagement depths. These values allow integration checks against existing turret or spindle fixtures during planning and spare-parts management. By relying on measurable characteristics rather than ambiguous descriptions, maintenance schedules and parts lists can be harmonised with inventory systems, supporting efficient material flow and reduced downtime in the production environment. Robust form and single-unit supply support workshop logistics The product is delivered as a single unit (packaging unit 1), suitable for targeted replacements and small-batch stocking. The Form Z2 geometry provides a standardised sealing solution that fits into established toolholding workflows, simplifying storage and reorder processes. For buyers consolidating suppliers, this standard form factor helps to reduce SKUs and eases identification in tool cabinets and ERP systems, improving procurement efficiency and traceability. Specification guidance and application relevance Intended for use with VDI30 toolholder interfaces, the part acts as a simple mechanical blanking device to close an opening according to the VDI/DIN standard geometry. The clear numeric data included with the item aids decision-making in workshops and production planning: the geometric values can be matched directly against toolholder drawings and machine documentation. For complex installations or non-standard toolholder variants, the Metav technical team can assist with compatibility checks and ordering advice. For tailored advice on specifying TECWERK closure plugs for a VDI30 system or to secure compatible stock, contact Metav Werkzeuge’s technical sales team in Emmerich — rapid clarification and supply from a dedicated precision partner are available by phone or email. Technical data SKU: 2000833696NW Article: Verschlussstopfen Z2 DIN 69880 VDI30 STA TECWERK Packaging unit: 1 Facts Form: Z2 d1: 30 mm A: 20 mm D: 68 mm Standard: DIN 69880 / VDI30 Special features Product type: closure plug / blanking plug Brand: TECWERK Supplied as single item FAQ What interface does this plug suit? The plug is designed for the VDI30 interface and conforms to the geometric references of DIN 69880 for Z2 form seating. Which dimensions are critical for fit verification? Key dimensions for verification are d1 30 mm, A 20 mm insertion depth and the D 68 mm overall diameter; these determine seat and clearance. Is this part supplied as a single unit or in sets? The item is supplied as a single unit (packaging unit 1), intended for individual replacement or selective stocking. Can this plug be used with other VDI interfaces? The component is specified for VDI30 with Form Z2 geometry; compatibility with other VDI sizes requires matching the corresponding form and dimensions. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Closure Plug Z2 Form A20 D83, DIN 69880 VDI40 - TECWERK
Take advantage of precise fit and reliable protection with the combination of Form Z2 geometry and VDI40 compatibility for reduced downtime and cleaner toolholders. Order the sealing plug directly via Metav Werkzeuge or consult the Metav specialists for suitability checks. Sealing plug Z2 (DIN 69880) for VDI40 toolholders — TECWERK The Sealing plug Z2 DIN 69880 VDI40 TECWERK is a closure component for VDI40 toolholders, designed to protect internal bores and interfaces during storage, transport and maintenance. VDI40 standard compatibility Form Z2 geometry for precise fit d1 40 mm nominal bore Protects toolholder internals Prevents contamination and reduces maintenance intervals The primary purpose of this sealing component is to prevent contamination of the toolholder interior and interfaces, thereby reducing the risk of corrosion and particle ingress. By closing off the spindle-side bore with a precisely formed plug, routine cleaning cycles become less frequent and unscheduled maintenance is lower. The combination of standard conformity and defined dimensions ensures predictable performance in workshop workflows, delivering measurable time savings and improved uptime for production-critical tooling systems. Ensures reliable fit across VDI40 systems Compatibility with the VDI40 interface and compliance with DIN 69880 allow secure placement in standardised toolholders. The Form Z2 profile provides a tight seating geometry while the nominal bore d1: 40 mm and outer diameter D: 83 mm ensure the part aligns with common VDI40 receptacles. This technical conformity simplifies inventory management: one recognised component type can serve multiple holders. Clear dimensional data supports quick verification during goods receipt and fit checks on the shop floor, reducing assembly time and minimising installation errors. Simplifies storage and handling while protecting investment As a simple yet effective accessory, the plug offers a practical way to protect cutting tools and holders during storage and transport. Using standardised closure components helps maintain toolholder surfaces and sealing faces, which preserves concentricity and prolongs the service life of precision interfaces. For operations seeking consistent handling procedures, these plugs enable orderly storage routines and quicker setup at changeovers. The product’s measured design supports both experienced technicians and those newer to toolroom practice, delivering confidence in handling and preservation. For compatibility verification or to arrange supply of the TECWERK VDI40 sealing plug, contact Metav Werkzeuge in Emmerich for tailored advice and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000833697NW Label: Verschlussstopfen Z2 DIN 69880 VDI40 STA TECWERK Manufacturer: TECWERK Product type: Sealing plug Packaging unit: 1 UID: 2000833697NW Dimensions & core data d1: 40 mm A: 20 mm D: 83 mm Form: Z2 Standard: DIN 69880 / VDI40 Special features Form Z2 geometry VDI40 interface compatibility Designed for closure and protection of toolholder bores Suitable for storage and transport protection FAQ What does Form Z2 indicate for this sealing plug? Form Z2 describes the plug’s seating geometry and contour; it is the specified profile that ensures a secure, repeatable fit in compatible VDI40 receptacles. Is the plug compatible with all VDI40 toolholders? Compatibility is intended for VDI40 interfaces that conform to DIN 69880 dimensions; verification against the specific holder drawing is recommended because variations in holder design can exist. What are the main dimensions to check before fitting? Key dimensions are the bore diameter d1: 40 mm, the axial length A: 20 mm and the outer diameter D: 83 mm; these determine seating depth and clearance. Is the material of the sealing plug specified? The product listing does not specify the material; material information is not provided in the available product data. Can the plug be used during machining operations? This plug is designed for protection during storage, transport and handling; it is not intended as a component for use during active cutting or high-speed machining. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com