10-92mm Clamping Wedge For T-Slot 12+14mm, M12 Thread - AMF
Take advantage of precise T-slot compatibility and a wide clamping range to streamline fixture setup: the combination of compatibility with 12 and 14 mm T-nuts and an adjustable clamping height of 10–92 mm enables faster, more repeatable clamping. Order the component directly via Metav Werkzeuge or consult Metav's technical team for application advice. Clamping Iron No. 6314V — T-slot clamp for 12/14 mm T-nuts, 10–92 mm clamping height (AMF) The Clamping Iron No. 6314V is a dedicated T-slot clamping element designed for secure fixturing in machine tables and modular workholding systems; suited to setups using 12 mm and 14 mm T-nuts with an adjustable clamping height range of 10 to 92 mm. T-slot compatible with 12 and 14 mm Adjustable clamping height 10–92 mm Suited for M12 and M14 fastening Precision and compatibility for reliable fixturing The clamping iron is engineered to integrate with standard T-slot tables that use 12 mm or 14 mm T-nuts, providing a dependable interface for a wide range of fixtures. The large clamping height (10–92 mm) allows variation in workpiece thickness without swapping parts, which reduces changeover time. For users unfamiliar with the term, clamping height describes the vertical range that the clamp can accommodate between its lowest and highest position; a broader range means fewer intermediate components are required. This characteristic supports consistent clamping pressure and repeatable setups in daily workshop and production environments. Quick assembly and standardised fastening for reduced downtime Designed for compatibility with common bolt sizes, the component features a thread M12 and is suitable for M12 and M14 fastening solutions, enabling direct connection to typical clamping bolts and studs. The 14 mm useful width and 100 mm overall length make it compact yet effective for tight fixturing arrangements. These standard dimensions facilitate rapid retrofitting into existing clamping systems and reduce the need for bespoke adapters. The result is a tangible improvement in setup efficiency and less time lost on mechanical integration. Consistent stock item for workshop and production use As a purpose-built fixture element from AMF, this clamping component (SKU 4000603022NW) is supplied as a single unit (packaging unit: 1), making it straightforward to order and keep as a spare in stores or toolrooms. The standardised geometry supports interchangeability across machines and fixtures, which simplifies inventory management and planning. Specifying standard components like this reduces risk in procurement and helps maintain steady production flow through predictable replacement and maintenance cycles. For ordering, technical clarification or to source compatible fastening hardware for AMF clamping components contact Metav Werkzeuge — reach out via info@metav-werkezeuge.com or call +49 2822 7131930 for tailored advice and next‑day supply options Technical data Article number: 4000603022NW Type: Nr. 6314V Brand: AMF Product type: Clamping iron Facts Clamping height: 10 - 92 mm T-nut compatibility: 12 + 14 mm Width: 14 mm Overall length: 100 mm Thread: M12 Suitable for: M12, M14 Special features Packaging unit: 1 SKU: 4000603022NW Label reference: Spanneisen Nr.6314V f.T-Nut 12+14mm Spann-H.10-92mm AMF axite_enrichment: A: 20; B2: 40; E1: 21; E2: 40; LS: 94 FAQ What table types is this clamping element compatible with? This clamping iron is compatible with machine tables and fixtures that accept 12 mm or 14 mm T-nuts, enabling installation on many common industrial and workshop T-slot systems. Which bolt sizes can be used with this clamping iron? The component is designed around a thread M12 and is suitable for both M12 and M14 fastening arrangements, which permits use with standard clamping bolts and studs. How does the clamping height affect fixture flexibility? The 10–92 mm clamping height range allows the clamp to secure different workpiece thicknesses without additional risers, increasing flexibility and reducing the number of parts needed for varied production runs with the Clamping Iron No. 6314V. What is the exact product reference for ordering? Order the part using SKU 4000603022NW or type reference Nr. 6314V; both identifiers correspond to the AMF clamping iron described above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Clamping Wedge T-Slot 12/14/16mm For M12 M14 DIN 6314 - AMF
Take advantage of a universal T‑slot fit, proven conformity to DIN 6314 and a compact 100 mm length that together deliver reliable fixture control and fast set‑ups — order directly via Metav Werkzeuge or consult our specialists for tailored advice. T‑slot clamping bar DIN 6314 (T‑nut 12/14/16) – 100 mm, AMF T‑slot clamping bar DIN 6314 (T‑nut 12 + 14 + 16) for secure fixturing in machine tables and modular clamping systems. Universal fit for T‑nut 12 + 14 + 16 Durable 100 mm length for secure clamping Works with M12 and M14 threads Conforms to DIN 6314 standard Consistent clamping performance for production workflows The T‑slot design, specified to DIN 6314, provides a standardised interface that simplifies fixture planning and reduces compatibility checks across machines. By using a component with a universal fit to common T‑nut sizes, production planners benefit from fewer variant parts and faster machine changeovers. The standard conformity also supports predictable mechanical behaviour under load, which helps maintain component tolerances and reduces rework rates. This rational performance argument ensures predictable throughput and supports long‑term process reliability. Thread compatibility that shortens set‑up time Designed to accept common metric threads, the clamping bar works with M12 and M14 fixing hardware, enabling straightforward integration into existing clamping assemblies. The clear specification of compatible threads reduces selection errors during procurement and assembly, translating into faster set‑ups and lower downtime. Where fixture repeatability matters, the defined thread compatibility supports consistent torque application and secure clamping, reducing slippage and the need for frequent retorquing. Compact length for accurate positioning and space‑efficient fixtures With a 100 mm total length, this clamping element offers a compact footprint that assists in dense fixture layouts and precise positioning of workpieces. The shorter profile allows for closer proximity to cutting zones when space constraints demand it, while still delivering the clamping force required for stable machining. For workshops that balance flexibility with precision, the compact design enables versatile fixturing without sacrificing rigidity — a practical advantage for both prototypes and small‑batch production. Streamlined sourcing and dependable supply from Metav Choosing a standardised clamping component from a trusted supplier reduces procurement complexity. Metav’s position as a precision partner means access to a broad range of compatible fixturing products and expert advice when configuring a clamping concept. The combination of technical clarity and reliable distribution minimises lead times and supports continuous production. Confidence in supply and documentation contributes to better planning and fewer interruptions on the shop floor, reinforcing both operational and reputational reliability. Select this AMF T‑slot clamping bar for dependable fixturing and contact Metav Werkzeuge for purchasing support or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833003NW UID: 4000833003NW Label: Spanneisen DIN 6314 f.T‑Nut 12+14+16mm L.100mm AMF Norm: DIN 6314 Product type: Spanneisen (clamping bar) Brand: AMF Facts Width: 14 mm Total length: 100 mm T‑nut compatibility: 12 + 14 + 16 Packaging unit: 1 Special features Suitable for: M12, M14 Axite enrichment: Addition: A: 20; B2: 40; B3: 14; E1: 21; E2: 40 FAQ What T‑slot sizes does the clamping bar support? The clamping bar is compatible with T‑nut sizes 12, 14 and 16, ensuring flexible use across standard machine tables. Which thread sizes can be used with this clamping element? This clamping element is suitable for M12 and M14 fixings; selecting the matching thread avoids installation errors and maintains clamp integrity. Does the product comply with an industrial standard? Yes, the T‑slot clamping bar conforms to DIN 6314, providing a recognised standard for T‑slot fixturing components. Is the 100 mm length suitable for tight fixture arrangements? The 100 mm total length offers a compact solution for space‑constrained setups while preserving the clamping stability required for precision machining. What information is given by the axite enrichment values? The axite enrichment entries describe the specified additional parameters for this clamping bar used in detailed fixture planning and inventory classification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Fork Clamp Bar Slot 11mm For M10 Clamp Screw DIN 6315B - AMF
Benefit from standard-compliant clamping and precise slot sizing: the DIN 6315B conformity combined with an 11 mm slot and M10 compatibility ensures secure, repeatable clamping in compact fixtures. Order the AMF fork clamping bar directly via Metav Werkzeuge or ask our consultants if needed. AMF fork clamping bar DIN 6315B — 11 mm slot, 100 mm length AMF fork clamping bar DIN 6315B is a fork-style clamping element designed for fixture applications where standardised dimensions and M10 screw compatibility are required. DIN 6315B standardised fork clamp 11 mm slot width for precise seating 100 mm overall length for compact fixtures Compatible with M10 clamping screws Reliable, standardised clamping for repeatable setups Compliance with DIN 6315B provides a defined reference for repeatable clamping operations, reducing setup variability on the shop floor. The standardised geometry simplifies interchangeability within modular fixture systems, so changes to jigs or workholding fixtures do not require bespoke adjustments. Emphasis on precision benefits production runs that demand consistent part location and repeatability. Space-saving fork design for flexible fixture layouts The fork configuration and 100 mm overall length make the component suitable for tight fixture envelopes and nested clamping arrangements. The compact form factor helps to optimise clamping density without sacrificing access for tightening tools. In practice, a shorter clamp length can shorten cycle times by easing operator handling and enabling closer workpiece placement on the table. Clear compatibility with M10 clamping systems A 11 mm slot width is sized to accept common clamping interfaces and to align accurately with M10 clamping screws. For planners and purchasers, this means straightforward integration into existing M10-based clamping meshes and minimal additional procurement of adaptors. The defined slot dimension also aids in achieving a secure seating that supports consistent clamping force transmission. Integrates smoothly into industrial workflows Designed for use in industrial workholding, the fork clamping element supports quick retrofitting into existing fixtures and modular tooling systems. The standardised dimensions reduce engineering time for new fixtures and lower the risk of assembly errors in the jig build phase. Reliability in fixture elements contributes directly to overall process efficiency and fewer stoppages during production. For secure, standard-compliant clamping choose the AMF fork clamping bar and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833022NW Product type: Fork clamping bar Standard: DIN 6315B Brand: AMF Label: Gabelspanneisen DIN 6315B Schlitz-B.11mm L.100mm f.Spannschraube M10 AMF Facts Slot width: 11 mm Overall length: 100 mm Clamping screw size: M10 Pack unit: 1 Axite enrichment: A: 20; B2: 31; B3: 10; B4: 5 Special features Fork design (Gabelausführung) Standardised dimensions for modular fixtures Compatibility with M10 clamping systems FAQ What slot width does the fork clamping bar have? The fork clamping bar features an 11 mm slot width, suitable for precise seating in modular fixtures. Which clamping screw size is compatible with this item? Compatibility is specified for M10 clamping screws, enabling integration with common M10-based systems. Is this clamp manufactured to a recognised standard? Yes, the component conforms to DIN 6315B, ensuring consistent dimensions for repeatable setups. What is the overall length of the clamp? The overall length is 100 mm, designed for compact fixture arrangements and dense workholding layouts. Can the clamp be used in existing modular fixture systems? The DIN 6315B geometry and M10 compatibility allow straightforward integration into existing modular fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm-40mm Clamping Wedge For T-Slot 12mm With M12x12x100 Clamp Screw, 14mm Width - AMF
Take advantage of precise, repeatable workholding with the AMF clamping element that combines 12 mm T‑slot compatibility and an adjustable clamping height of 10–40 mm for flexible fixture setups. Order directly via Metav Werkzeuge or request advice from our consultants for integration into existing clamping systems. AMF Clamping Element No. 6314V — T‑slot 12 mm, clamping height 10–40 mm AMF Clamping Element No. 6314V is a compact workholding component engineered for secure clamping in 12 mm T‑slot systems, suitable where height adjustability and robust fixation are required. T‑slot compatibility: 12 mm Adjustable clamping height 10–40 mm Supplied with M12 x 12 x 100 clamping screw Robust design for secure workholding Faster set‑ups with standard T‑slot compatibility The clamping element is designed specifically for 12 mm T‑slot rails, enabling rapid integration into common machine tables and fixture plates. Compatibility with this widely used slot size reduces the need for adapters and minimises machine downtime. The simple geometry and standardised interface support quick positioning and reliable repeatability, making the component well suited to batch production and frequent changeovers where efficient clamping is essential. Flexible clamping range to accommodate varied stock With an adjustable clamping height of 10–40 mm, the unit covers a broad range of workpiece thicknesses without additional spacers. The height range allows a single clamping element to be used across different jobs, simplifying tool inventory and reducing setup complexity. The clear mechanical range also allows planners to calculate clamp forces and overhang safely, providing more predictable results during milling, drilling or light finishing operations. Purposeful hardware for secure fixation The delivery includes a M12 x 12 x 100 clamping screw, matched to the component’s M12 thread and overall length, which ensures correct engagement and clamping stroke. The specified 100 mm total length is suitable for typical fixture stacks while the standard M12 thread guarantees compatibility with commonly stocked fasteners. This combination of thread size and screw length enables consistent clamp preload and reduces the risk of improper assembly in production environments. Practical advantages for workshop and production environments The compact form and a width of 14 mm contribute to space‑efficient clamping arrangements, allowing closer placement of multiple clamps where workpiece support is critical. The element’s straightforward design keeps maintenance simple and inspection quick, which supports continuous operation. For technical clarifications or dimension verification when integrating into existing jigs, Metav’s product specialists can provide detailed advice and measurements to assist with planning and procurement. Contact Metav Werkzeuge today for tailored advice on integrating the AMF clamping element into existing fixture systems and for ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833072NW Type: Nr. 6314V Product: Clamping element Brand: AMF Packaging unit: 1 Facts T‑slot: 12 mm Clamping height: 10–40 mm Width: 14 mm Thread: M12 Overall length: 100 mm Special features Includes clamping screw M12 x 12 x 100 Compact form for close clamp spacing Suitable for standard T‑slot fixture tables Robust design for secure workholding FAQ Which T‑slot size does the clamp fit? The clamping element is designed for a 12 mm T‑slot, matching common machine table standards. What is the adjustable clamping height range? The unit provides a clamping height of 10–40 mm, allowing use across a wide range of workpiece thicknesses. Is the clamping screw included and what are its dimensions? Yes, the delivery includes a M12 x 12 x 100 clamping screw to match the component’s thread and required engagement. What thread specification does the clamp use? The element uses an M12 thread, compatible with standard M12 fasteners. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Clamping Iron For T-Slot 16+18mm, Suitable For M16/M18 - AMF
Take advantage of a robust T‑slot clamping solution that meets DIN 6314 standards and fits 16 + 18 mm T‑slots; the compact 125 mm length and 18 mm width enable precise, repeatable fixturing. Order directly via Metav Werkzeuge or consult the team for tailored mounting advice. AMF T-slot Clamping Bar (DIN 6314) — 125 mm for 16 + 18 mm T‑slots A AMF T-slot Clamping Bar (DIN 6314) for secure and repeatable workpiece clamping on machine tables with 16 mm and 18 mm T‑slots. DIN 6314 conformity for reliable compatibility Fits 16 + 18 mm T‑slots for universal clamping 125 mm overall length for compact setups Suitable for M16 and M18 fixation Secure, standardised clamping that reduces setup variance The DIN 6314 specification ensures a standardised interface between the clamping element and machine table, delivering consistent contact geometry and predictable clamping behaviour. With a compact 125 mm overall length and 18 mm nominal width, this clamping bar is designed to stabilise short to medium workpieces where a small footprint is required. The standard compliance simplifies fixture planning and reduces the need for bespoke adaptors, which in turn lowers setup time and increases repeatability on production or jobbing machines. Efficient integration with existing fixturing and bolts Compatibility with 16 + 18 mm T‑slots and thread sizes M16 / M18 enables direct use with common T‑slot bolts and clamping hardware, avoiding additional conversion parts. The geometry supports secure force transfer to the workpiece, helping to maintain machining accuracy under typical cutting loads. For operations that demand quick changeovers, the compact form factor allows fast repositioning, leading to improved throughput and fewer machine idle minutes while preserving machining stability. Compact design for versatile workshop use and predictable handling The clamping bar’s dimensions and adherence to DIN enable easy storage, handling and replacement planning within a standard workshop environment. Supplied in a single unit, the component is suitable for supplementing existing clamping kits or for targeted applications where a short, robust clamping element is required. Traceable identification via SKU and conformity markings supports inventory control and maintenance scheduling, ensuring consistent availability and diminished risk of mismatched parts. For tailored advice on integrating this DIN 6314 clamping bar into existing fixtures, contact Metav Werkzeuge for product guidance and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833005NW Standard: DIN 6314 Product type: T‑slot clamping bar Brand: AMF Facts Overall length: 125 mm Nominal width: 18 mm T‑slot compatibility: 16 + 18 mm Suitable for: M16, M18 fixation Packaging unit: 1 Special features Conforms to DIN 6314 Compact design for small fixtures Traceable SKU for inventory control Intended for machine table clamping applications FAQ What table slots does this clamping bar fit? The clamping bar is designed for 16 + 18 mm T‑slots, making it suitable for machine tables and fixtures that accept these standard slot widths. Which bolt sizes are compatible with this AMF clamping bar? Compatibility is stated for M16 and M18 fixation, allowing use with common T‑slot bolts and clamping hardware. What is the overall length and width of the clamping element? The component measures 125 mm in overall length with a nominal width of 18 mm, optimised for compact clamping arrangements. Does the product adhere to an industry standard? Yes — the clamping bar conforms to DIN 6314, ensuring standardised geometry and predictable interfacing with machine tables. How is the item supplied and identified? The item is supplied as a single unit and is listed under SKU 4000833005NW for inventory and ordering purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Clamping Wedge T‑Slot 12/14/16mm For M12 M14, DIN 6316 - AMF
Reliable, standard-compliant clamping for T-slots 12, 14 and 16 mm combined with compatibility for M12 and M14 fastenings supports predictable set-up and secure holding in common clamping systems. Order the component directly via Metav Werkzeuge or consult Metav's specialists for matching parts and delivery options. Clamping wedge DIN 6316 (AMF) — for T-slots 12 / 14 / 16 mm, 125 mm length A Clamping wedge DIN 6316 intended for securing fixtures and workpieces in standard T-slots, suited to M12 and M14 fastenings. Standard DIN 6316 compliance Fits T-slots 12 / 14 / 16 mm Length 125 mm for deep engagement Compatible with M12 and M14 fixtures Consistent fit with standard T-slot systems The DIN 6316 designation guarantees a familiar interface with common clamping rails and tables, simplifying procurement and replacement planning. Designed for T-slots 12 / 14 / 16 mm, the component provides a standardised mating geometry that reduces variation between suppliers. For workshops that rely on repeatable fixtures, this results in fewer adjustments during set-up and a predictable clamping envelope that integrates with existing tooling. Secure hold that shortens set-up time By combining a compact profile with a 125 mm engagement length, the wedge delivers stable contact across the slot, improving clamp stability under lateral loads. The component’s compatibility with M12 and M14 fastenings means common bolts and studs can be used without special adaptors, enabling faster assembly and fewer inventory items. The result is reduced machine downtime and more efficient batch changes on the shop floor. Predictable procurement through norm conformity Conformity to DIN 6316 is a practical advantage for purchasing and maintenance: the specification describes geometric and functional expectations, so replacements and spare parts remain interoperable. For purchasing departments, this lowers the risk of mis-matching components and supports a leaner spare-part inventory. Documentation and parts lists benefit from the norm reference when planning long-term toolroom supplies. Practical workshop considerations and applications The compact design and standardised dimensions make the element suitable for a wide range of clamping tasks in general workshop and industrial settings where T-slot tables are used. The simple geometry supports straightforward cleaning and inspection during maintenance cycles. For customised clamping assemblies, the wedge functions as a reliable basic element that pairs with standard bolts and clamp bars to build robust fixture systems. For supply enquiries or assistance selecting compatible fixtures for the AMF clamping wedge, contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich Technical Data Article number: 4000833058NW Standard: DIN 6316 Designation: Clamping wedge for T-slots (Spanneisen), AMF SKU / UID: 4000833058NW Facts T-slot compatibility: 12, 14, 16 mm Width: 14 mm Total length: 125 mm Suitable for: M12, M14 Packaging unit: 1 Enrichment codes: Addition: A: 20; B2: 40; B3: 20; C: 16; E1: 44; E2: 40 Special features Conforms to DIN 6316 Designed for standard clamping systems Intended for workshop and industrial fixtures Brand: AMF FAQ What T-slot sizes does the clamping wedge support? The clamping wedge supports T-slots of 12, 14 and 16 mm, matching standard machining table profiles. Which bolt sizes are compatible with this clamping element? Compatible bolt sizes are M12 and M14, enabling use with common clamping hardware. How long is the component and what does that mean for clamping stability? The element has a total length of 125 mm, which provides extended engagement in the slot for improved lateral stability during machining. Is the product standardised and easy to replace with equivalents? Yes; the item conforms to DIN 6316, which makes it straightforward to find equivalent parts with compatible geometry and function. What is the SKU for ordering or reference? The SKU / UID for ordering is 4000833058NW (AMF clamping wedge). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Fork Clamp Bar 14mm Slot For M12 M14 Clamping Screw, DIN 6315B - AMF
Take advantage of the DIN 6315B conformity and fork-style reliability for consistent, repeatable clamping. The 14 mm slot and 125 mm overall length provide secure seating and extended reach for standard clamping screws. Order the fork clamping wedge directly via Metav Werkzeuge or ask our consultants if needed. AMF Fork clamping wedge DIN 6315B (slot 14 mm, L 125 mm) The AMF fork clamping wedge DIN 6315B is a fork-design clamping wedge for workshop fixtures and vices, engineered to accept standard M12 and M14 clamping screws. DIN 6315B compliant fork design Compatible with clamping screws M12 and M14 14 mm slot width for secure seating 125 mm overall length for versatile clamping Stable fork design for predictable clamping results The fork-style construction delivers a consistent contact geometry that reduces lateral movement during tightening. Conformity with DIN 6315B means the part matches common fixture interfaces, helping to maintain repeatability across setups. The design focuses on straightforward mechanical function: fork engagement, screw tensioning and positive seating — all translated into reliable clamp behaviour in production environments. This section emphasises the measurable benefit of repeatable positioning and reduced rework. Compatibility with standard clamping screws and fixtures Specified for M12 and M14 clamping screws, the component integrates with widely used clamping hardware, simplifying parts procurement and replacement cycles. The 14 mm slot allows secure seating of the mating screw head or bolt, reducing the need for additional adaptors. For workshops standardising on metric screw sizes, this compatibility supports inventory rationalisation and faster changeovers between jobs. Practical dimensions that aid handling and reach The 125 mm overall length increases usable reach and offers added leverage when securing workpieces, especially in deeper or more crowded fixture assemblies. The compact yet extended format reduces the need for auxiliary extensions while preserving clearance for adjacent components. The item is identified as SKU 4000833023NW for ordering and stock reference; this simplifies reordering and traceability within procurement systems. For reliable fork-style clamping from AMF, contact Metav Werkzeuge in Emmerich for technical advice and fast fulfilment by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4000833023NW SKU / UID: 4000833023NW Product type: Clamping wedge Design: Fork design Standard: DIN 6315B Brand: AMF Packaging unit: 1 Facts Slot width: 14 mm Overall length: 125 mm Suitable for clamping screws: M12, M14 Axite enrichment: A: 25; B2: 38; B3: 12; B4: 6 Packaging unit: 1 Special features DIN 6315B conformity Fork-style clamping wedge For clamping screw M12 / M14 Workshop-ready geometry for fixtures Identified as SKU 4000833023NW FAQ Which clamping screws are compatible with the AMF fork clamping wedge? The AMF fork clamping wedge is designed for M12 and M14 clamping screws, providing a standard interface for common workshop hardware. Does this component fit fixtures built to DIN 6315B? Yes, the AMF fork clamping wedge complies with DIN 6315B, enabling it to mate with fixtures and fixtures components manufactured to that standard. What are the principal dimensions to verify before ordering? Key measurements are a 14 mm slot width and a 125 mm overall length; these determine seating compatibility and reach in the fixture assembly. Is the AMF fork clamping wedge suitable for use in tight assemblies? The fork geometry and 125 mm length are intended to increase reach while preserving clearance; however, final suitability depends on the specific fixture layout and clearance requirements — verify dimensions against the assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm T-Nut Clamp For T-Nut 12+14+16mm, DIN 6314 - AMF
Benefit from a combination of DIN 6314 conformity, compatibility with 12/14/16 mm T‑slots and support for M12/M14 clamping hardware for dependable workstation clamping; order directly via Metav Werkzeuge or consult our specialists for tailored selection advice. AMF T‑slot clamp DIN 6314 – for T‑slots 12/14/16 mm, 125 mm length The AMF T‑slot clamp DIN 6314 is a robust clamping component designed to secure workpieces on machine tables and milling fixtures with standard T‑slots Compatible with T‑slots 12 / 14 / 16 mm 125 mm overall length for extended reach Compatible with M12 and M14 clamping bolts Reliable clamping across common T‑slot widths Conforming to DIN 6314, this T‑slot clamp delivers consistent positioning and repeatable clamping performance on standard machine tables. Compatibility with 12/14/16 mm slots reduces the variety of clamps required in a busy workshop, streamlining inventory and setup. The standardised form helps achieve precision in fixture builds, as the component mates cleanly with established table geometries and commonly used clamping elements. Where stability and reproducibility matter, the standard conformity is a practical guarantee of fit and function. Fast installation and secure hold with standard threads Designed for use with M12 and M14 fasteners, the clamp enables quick assembly and secure mechanical engagement without special adapters. A 125 mm overall length provides additional reach for deeper setups while maintaining a compact footprint for crowded jigs. The combination of familiar thread sizes and extended reach supports efficient cycle changes and reduces non‑productive time during machining operations. For workshop teams, this means fewer adjustments and a faster return to productive runs while retaining a reliable clamping force. Built for workshop resilience and broad workshop use The design suits routine production and jobbing environments where robust components are required for repeated use. Compatibility with standard clamping hardware makes the clamp a practical choice for retrofit fixtures as well as new setups. The component’s straightforward geometry allows easy inspection and replacement during maintenance intervals, supporting uptime and predictable process quality. For buyers seeking a dependable, standards‑based clamping element, this option balances flexibility and longevity while fitting seamlessly into established tooling systems. For specification advice, availability and ordering of the AMF T‑slot clamp, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — our technical team will assist with selection and delivery options Technical data Article number: 4000833004NW Product: T‑slot clamp (Spanneisen) Brand: AMF Standard: DIN 6314 Facts Overall length: 125 mm Width: 14 mm T‑slot compatibility: 12 / 14 / 16 mm Suitable for thread sizes: M12, M14 Packaging unit: 1 Special features Suitable for use with standard clamping bolts M12 and M14 Axite enrichment: Addition: A: 20; B2: 40; B3: 14; E1: 21; E2: 50 SKU / UID: 4000833004NW FAQ How does the clamp accommodate different T‑slot widths? The clamp is profiled for 12 / 14 / 16 mm T‑slots so it fits common machine tables; the DIN 6314 geometry ensures a correct seating across these widths. Is this clamp suitable for milling fixtures and machine tables? Yes — the AMF T‑slot clamp DIN 6314 is intended for securing workpieces on milling fixtures and machine tables where standardised clamping is required. Which fasteners are recommended with this clamp? Use M12 or M14 clamping bolts as specified; these thread sizes are supported to provide the required clamping force and compatibility. What is the overall length and when is it useful? The overall length is 125 mm, offering extended reach for deeper setups or when additional clearance is needed between the clamp and workpiece. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm T-Slot Clamping Bar For T‑Nut 16+18, DIN 6316 - AMF
Reliable clamping performance and DIN 6316 conformity combine with compatibility for 16 + 18 mm T‑slots and a compact 125 mm length to deliver stable workholding for small fixtures and machining setups. Order directly via Metav Werkzeuge or contact the technical team for fit verification and supply details. Clamping bar AMF (DIN 6316) for T‑slot 16 + 18 mm, 125 mm length A robust clamping bar designed to secure workpieces in T‑slot tables with 16 and 18 mm grooves, offering standardised mounting and compact length for tight set‑ups. DIN 6316 compliance Fits T‑slots 16 and 18 mm Length 125 mm for compact clamping Suitable for M16 and M18 fastenings Secure, standardised clamping for repeatable setups The clamping bar conforms to DIN 6316, which ensures predictable geometry and repeatable positioning when used with matching T‑nuts and bolts. This standardisation reduces setup variation and supports consistent machining results; the direct consequence is fewer rejects and less rework. Compatibility with M16 and M18 fastening systems allows the clamping element to be integrated into common fixturing layouts without the need for custom adapters, improving process efficiency and throughput. Compact design that integrates with existing tables With a 125 mm overall length and suitability for 16 + 18 mm T‑slots, the component is intended for compact fixturing where space is limited but rigidity remains essential. The reduced footprint permits multiple clamping points on small workpieces and simplifies the arrangement of stop blocks and parallels. By using standard T‑slot interfaces and conventional fasteners, the clamping bar minimises the need for special tooling and keeps clamping procedures straightforward for production and repair tasks. Robust conformity and lower downtime through predictable behaviour Manufactured for reliable performance, the clamping element delivers consistent clamping force across cycles, which helps to avoid loosening and vibration-related issues during machining. Compliance with recognised standards supports quality assurance processes and makes inspection and replacement straightforward. The compact, standardised design also supports lean inventory strategies: the single‑piece spec reduces variant complexity and helps to maintain a smooth supply to the workshop bench. For reliable, standardised clamping that fits common T‑slot tables, contact Metav Werkzeuge for availability and technical advice — Metav Werkzeuge provides local stocking and expert guidance from Emmerich. Technical data Article number: 4000833059NW SKU / UID: 4000833059NW Designation: Clamping bar DIN 6316 for T‑slot 16 + 18 mm L 125 mm Facts Standard: DIN 6316 T‑slot width: 16 + 18 mm Length: 125 mm Width: 18 mm Suitable for: M16, M18 Packaging unit: 1 Special features Manufacturer: AMF Product type: Clamping bar Axite enrichment: Addition: A: 25; B2: 50; B3: 25; C: 20; E1: 51,5; E2: 40 FAQ Which table grooves are compatible with this clamping bar? The clamping bar is designed for 16 + 18 mm T‑slot grooves and works with standard T‑nuts specified for those widths. Can this component be used with M16 and M18 bolts? Yes, the clamping bar is suitable for fastening with M16 and M18 bolts, providing secure attachment to matching T‑nuts. Does the clamping bar meet an industry standard? The component is manufactured to DIN 6316, ensuring standardised dimensions and repeatable positioning in fixture assemblies. What is the overall length and typical application area? With an overall length of 125 mm, the clamping bar is ideal for compact fixturing and small‑format machining tables where space is restricted. Is this item supplied singly or in sets? The item is supplied as packaging unit 1, intended for single‑piece replacement or incremental fixture assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13-48mm Clamping Wedge for T-Slot 16mm with M16x125 Clamping Screw, 18mm Width - AMF
Take advantage of the combination of secure clamping, simple adjustability and a compact footprint for reliable fixturing in production and workshop environments; the compact M16 clamping screw, compatibility with T‑slot 16 mm and the adjustable clamp height 13–48 mm make repeatable set‑ups straightforward. Order the AMF Nr. 6314V clamping jaw directly via Metav Werkzeuge or ask our consultants if needed. Nr. 6314V Clamping Jaw — T‑slot 16 mm, adjustable height 13–48 mm (AMF) The Nr. 6314V clamping jaw is designed for machine tables and fixtures with a 16 mm T‑slot and provides a narrow 18 mm contact face for compact workholding in confined setups. Adjustable clamp height 13–48 mm Designed for T‑slot 16 mm Sturdy 18 mm clamp width Supplied with M16 x16 x125 screw Secure clamping for precise machining A compact clamping element with an M16 clamping screw delivers dependable holding force while the adjustable clamp height of 13–48 mm permits accommodation of varying workpiece thicknesses. This combination reduces re‑set times and minimises slippage during machining cycles, which improves process stability. The narrow contact profile maintains access to neighbouring operations and supports precise, repeatable workholding on assembly and milling tables. Quick integration into standard fixturing Fitting a 16 mm T‑slot is the core function of this clamping solution; the T‑slot 16 mm compatibility ensures plug‑and‑play alignment with common machine tables and fixture systems. The 125 mm overall length and compact 18 mm width balance reach and clearance, enabling rapid clamping without interfering with surrounding tooling. The supplied M16 x16 x125 clamping screw streamlines installation and avoids separate procurement of fasteners. Robust design that supports uptime and simple handling Built for repetitive use in workshop and light industrial environments, the component combines a straightforward geometry with proven thread size for predictable torque‑to‑holding results. The clamping jaw’s dimensions and included screw mean fewer separate parts to manage, supporting efficient inventory and faster set‑up. For unfamiliar terms: a T‑slot is the standard dovetail‑like track on machine tables that guides and locates clamping elements; the clamp height range denotes the vertical span the jaw can bridge between the table and the workpiece. For specification checks or to confirm fitment for a specific table or fixture, contact Metav Werkzeuge — our specialists will advise on the AMF Nr. 6314V clamping jaw and assist with supply and delivery from Emmerich; eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 4000833074NW Type: Nr. 6314V Product: Clamping jaw Brand: AMF Packaging unit: 1 Dimensions & core data Clamping height: 13–48 mm T‑slot: 16 mm Width: 18 mm Thread: M16 Overall length: 125 mm Supplied screw: M16 x16 x125 mm A: 25 B2: 50 E1: 26 E2: 45 LS: 55 Special features Supplied clamping screw M16 x16 x125 mm Compatible with T‑slot 16 mm systems Compact 18 mm clamp face for tight setups Adjustable clamp height for variable workpiece thickness FAQ What T‑slot size does this clamping jaw require? The clamping jaw is designed for a T‑slot 16 mm and integrates directly with machine tables and fixtures using that slot dimension. Is a clamping screw included with the item? Yes, the delivery includes a M16 x16 x125 clamping screw for immediate installation with the AMF Nr. 6314V clamping jaw. What range of clamping heights is possible? The adjustable clamp height spans 13–48 mm, allowing the jaw to bridge a variety of workpiece thicknesses without additional spacers. Can this jaw be used in compact fixtures with limited lateral space? The narrow 18 mm clamp width and 125 mm overall length make it suitable for confined layouts where neighbouring clamps or tools are close. Are the dimensional values A, B2, E1, E2 and LS provided? Yes; the component’s auxiliary dimensions are: A: 25, B2: 50, E1: 26, E2: 45, LS: 55, which assist in precise fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm Clamping Wedge Nr. 6314V Height 10-38mm M12x14x100mm - AMF
Compact clamping solution for 14 mm T-slots with an adjustable clamping height of 10–38 mm and supplied M12 x 14 x 100 mm clamping screw; combines straightforward installation and reliable workholding — order the AMF clamping jaw directly via Metav Werkzeuge or consult our specialists for application advice AMF clamping jaw Nr. 6314V — for 14 mm T-slot, adjustable clamping height 10–38 mm The AMF clamping jaw Nr. 6314V is a compact workholding component suited to T-slot fixtures, providing an adjustable clamping range for versatile workshop and production use Fits 14 mm T-slots Adjustable clamping height 10–38 mm Supplied with M12 x 14 x 100 clamping screw Robust design for industrial workholding Secure and adaptable workholding for T-slot fixtures The clamping jaw is engineered to deliver a secure grip in standard 14 mm T-slot systems, allowing straightforward accommodation of varying workpiece heights within the 10–38 mm range. This adjustability reduces the need for multiple shim sets or alternative jaws, streamlining setup procedures. The design translates into repeatable clamping pressure across batches, which supports consistent machining tolerances and fewer reworks. Compatibility with common T-slot profiles ensures quick integration into existing fixturing systems without major retrofitting. Fast installation and reduced setup time with included clamping screw Assembly is simplified by the delivered M12 x 14 x 100 mm clamping screw, which is matched to the jaw’s thread specification and overall length. The standard M12 thread provides reliable torque transmission for stable clamping, while the screw length suits common mounting depths in fixture plates. As a consequence, downtime for changeovers is minimised, and the component can be installed or replaced during routine maintenance with basic workshop tools. Clear mechanical interfaces reduce assembly errors and support predictable cycle times in production environments. Durable component design that supports industrial workflows Constructed for repetitive use in workshop and production settings, the jaw’s form factor focuses on long-term serviceability and consistent performance. The compact geometry is intended to withstand frequent clamping cycles and to fit within confined fixturing arrangements where space is at a premium. Attention to fit and thread standardisation reduces variability at the clamping interface, contributing to fewer rejects and a more reliable production flow. Metav’s sourcing and quality filter for the European market further ensures that each component meets industrial expectations for repeatability and robustness. Contact Metav Werkzeuge for availability of the AMF clamping jaw Nr. 6314V and for tailored advice on integrating this workholding component into existing fixture systems Technical data SKU: 4000833073NW Type: Nr. 6314V Brand: AMF Label: Spanneisen Nr.6314V f.T-Nut 14mm Spann-H.10-38mm Spannschraube M12x14x100mm AMF Packaging unit: 1 Facts T-slot width: 14 mm Width: 14 mm Clamping height: 10–38 mm Thread: M12 Overall length: 100 mm Clamping screw: M12 x 14 x 100 mm A: 20 mm B2: 40 mm E1: 21 mm E2: 40 mm LS: 49 mm Special features For T-slot 14 mm fixtures Adjustable clamping height 10–38 mm Supplied clamping screw M12 x 14 x 100 mm Compact footprint for confined fixturing FAQ Is this clamp compatible with 14 mm T-slots? Yes. The AMF clamping jaw Nr. 6314V (SKU 4000833073NW) is designed specifically for 14 mm T-slots and mates with common T-slot profiles. Is the clamping screw included with the jaw? Yes. The unit is supplied with a matched clamping screw: M12 x 14 x 100 mm for immediate installation. What workpiece thicknesses can be clamped? The clamping range covers 10–38 mm, enabling secure holding of a wide variety of workpiece heights without additional shimming. Is the component suitable for industrial production use? The jaw is built for repetitive workshop and production use, with standardised threads and dimensions to support reliable, repeatable workholding. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16-65mm Clamping Wedge For T-Slot 20mm With M20x160 Clamping Screw - AMF
Benefit from proven T‑slot compatibility and a wide clamping height range for flexible, secure workholding; the set includes a ready-to-fit M20 clamping screw for immediate use. Order the clamping iron directly via Metav Werkzeuge or ask our consultants if needed. Clamping iron No. 6314V — clamping bar for 20 mm T‑slots with 16–65 mm adjustable height (AMF) A Clamping iron No. 6314V designed for 20 mm T‑slots, offering adjustable clamping heights for versatile fixturing in milling and drilling operations For 20 mm T‑slots Adjustable clamping height 16–65 mm Includes M20 x 20 x 160 clamping screw Robust 22 mm jaw width Secure, adjustable clamping for varied workpieces The Clamping iron No. 6314V delivers a pragmatic solution where versatility matters. Compatible with a 20 mm T‑slot, the device provides a 16–65 mm clamping range that reduces the need for multiple jaw sizes and simplifies setup. The adjustable height enables stable contact across differing workpiece profiles, so fixtures remain firm during cutting or drilling. This results in more consistent machining outcomes and fewer interruptions for readjustment. Ready-to-use hardware reduces setup time Equipped with a M20 x 20 x 160 clamping screw, the assembly is ready for immediate installation, shortening preparation phases on the machine table. The combination of a 22 mm jaw width and 160 mm overall length offers a balanced contact surface that improves load distribution and reduces point stress. A standard M20 thread ensures compatibility with common clamping systems, enabling quick exchange and straightforward maintenance of workholding elements. Practical applications and reliability in the workshop Designed for typical shopfloor environments, this AMF clamping component suits machine vices, milling tables and bespoke fixtures where robust holding is required. The compact footprint supports precise positioning while the dimensioned design minimises vibration during machining. Specified geometry and included screw mean fewer additional purchases and predictable behaviour under load, lending confidence to both repetitive and one‑off production tasks. For ready, dependable workholding with AMF precision, contact Metav Werkzeuge to confirm stock and suitability for specific setups at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833076NW Type: No. 6314V Product: Clamping iron Brand: AMF Packaging unit: 1 Dimensions & core data Clamping height: 16 - 65 mm T‑slot: 20 mm Jaw width: 22 mm Thread: M20 Overall length: 160 mm Features & accessories Includes clamping screw M20 x 20 x 160 Axite enrichment: A: 30; B2: 60; E1: 30; E2: 60; LS: 69 UID / SKU: 4000833076NW FAQ Which T‑slot size is this clamping iron intended for? The clamping iron is designed for a 20 mm T‑slot, ensuring direct compatibility with standard 20 mm machine table slots. What clamping height range does it offer? The device provides an adjustable clamping height from 16 mm to 65 mm, suitable for a broad range of workpiece profiles. Is a clamping screw included with the product? Yes, the item includes a M20 x 20 x 160 clamping screw as part of the delivery for immediate use. What are the key dimensions that affect stability? Primary stability characteristics are the 22 mm jaw width and the 160 mm overall length, which together support even load distribution. For which applications is this clamping bar best suited? The component is well suited to milling and drilling fixtures, machine vices and general workshop fixturing where secure, repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Iron for T‑Slot 20+22mm, DIN 6316 - AMF
Benefit from DIN 6316 conformity, compatibility with T-slot 20/22 mm and M20/M22 fasteners, and a 160 mm length that ensures stable clamping in standard machining set-ups. Order the clamping bar directly via Metav Werkzeuge or consult the advisers for application-specific guidance. AMF clamping bar DIN 6316 — for T-slot 20/22 mm, 160 mm The AMF clamping bar DIN 6316 is designed as a reliable clamping element for machine tables with T-slots of 20 and 22 mm, providing a standardised solution for secure workholding in milling and machining operations. Conforms to DIN 6316 Fits T-slot 20 and 22 mm Length 160 mm for stable clamping Compatible with M20 and M22 fasteners Predictable fit and standard compliance for efficient set-up Conformity to DIN 6316 ensures a predictable mechanical interface between the clamping element and modular fixturing systems. The stated tolerance and compatibility with T-slot 20/22 mm reduce set-up iterations and simplify inventory management for production environments. Where interchangeability and reproducible clamping force matter, adherence to this norm minimises the need for individual adjustment and helps to keep cycle times consistent across batches. Stable workholding through appropriate dimensions The 160 mm overall length delivers a blend of reach and rigidity that suits a wide range of bench and table fixtures. In practice, the extended contact length contributes to stable clamping, lowering the risk of micro-movement during cutting or finishing operations. The component is specified for use with M20 and M22 fasteners, which allows integration with common clamping bolts and stud systems; this compatibility supports secure vertical pressure transfer without requiring bespoke hardware. Practical integration, traceability and workshop readiness Supplied as a single unit, the clamping bar is intended for direct incorporation into existing clamping arrangements and modular assemblies. Traceability is supported by the product identifier 4000833061NW, which assists in procurement and maintenance records. The design focus on compatibility and standard dimensions reduces the learning curve for workshop staff and shortens the time from delivery to productive use, supporting uninterrupted production and dependable repeatability. Contact Metav Werkzeuge for tailored advice on integrating AMF clamping bars in specific fixtures — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — Metav’s specialists provide practical support from Emmerich to the workshop floor Technical data Article number: 4000833061NW Product type: Clamping bar (Spanneisen) Standard: DIN 6316 Dimensions & compatibility Length: 160 mm Width: 22 mm T-slot: 20 + 22 mm Suitable for: M20, M22 Additional details Packaging unit: 1 SKU / UID: 4000833061NW Brand: AMF Axite enrichment: Addition: A: 30; B2: 60; B3: 30; C: 24; E1: 59; E2: 55 FAQ Is this clamping bar suitable for standard T-slot tables? The AMF clamping bar DIN 6316 is intended for machine tables with T-slot 20/22 mm and therefore fits standard tables that use these slot dimensions. Which fasteners are compatible with this component? Compatibility is specified for M20 and M22 fasteners; the bar is engineered to work with commonly available clamping bolts and studs for those thread sizes. What is the length and how does it affect clamping performance? At 160 mm overall length, the clamping bar provides increased contact area and improved rigidity, which contributes to more stable workholding during machining. How can the product be identified for reorder or maintenance? Use SKU 4000833061NW and the AMF designation when reordering to ensure the correct DIN 6316 clamping bar is supplied. Is this suitable for modular fixturing systems? Yes; the DIN 6316 standard and T-slot 20/22 mm compatibility make it suitable for integration into modular clamping and fixturing arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Iron T-Slot 20/22mm DIN 6314, Suitable for M20/M22 - AMF
Take advantage of the DIN 6314 standard, dual T-slot (20 / 22 mm) compatibility and the 160 mm overall length for secure, repeatable workholding; order the clamping solution directly via Metav Werkzeuge or request tailored advice from our consultants. AMF T-slot clamping jaw DIN 6314 — for 20 / 22 mm T-slots, 160 mm length The AMF T-slot clamping jaw is a precision clamping element engineered for secure workholding in 20 and 22 mm T-slots, ideal for milling machines, fixtures and general workshop clamping tasks. DIN 6314 standardised design Fits 20 mm and 22 mm T-slots Overall length 160 mm Compatible with M20 and M22 bolts Consistent, standardised clamping for reliable setups The DIN 6314 compliance ensures consistent compatibility across machines and fixtures: the clamping geometry follows an established norm so replacement parts and additional clamping elements integrate without modification. With a 160 mm overall length and a contact width of 22 mm, the component provides a predictable clamping surface that reduces setup variability. For production environments where interchangeability and repeatable tolerances matter, this standardised approach shortens setup validation and supports stable machining cycles. Versatile compatibility that simplifies tooling decisions Designed to work in both 20 mm and 22 mm T-slots, the clamping jaw accepts common bolt sizes M20 and M22, allowing one part to serve multiple machine tables and fixture systems. This versatility decreases the number of special parts required in a tooling kit and simplifies ordering and inventory management. The clear specification of slot compatibility and bolt fitment translates directly into fewer changeovers and faster fixture assembly, supporting productivity in job shops and maintenance departments alike. Practical benefits for workshop efficiency and uptime As a single-piece clamping element, the component offers straightforward handling and minimal maintenance. The compact design supports secure contact with the workpiece while remaining easy to position in the slot; this reduces the risk of misalignment during tightening and contributes to lower rework rates. Supplied as a single unit per packaging, the item suits situations where precise, standardised clamping elements are required for both short-run jobs and serial production. The defined geometry also aids in predictable force application when used with standard clamping bolts and accessories. For dependable clamping solutions from AMF and procurement support, contact Metav Werkzeuge in Emmerich for technical guidance or to discuss fitment and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833007NW Brand: AMF Type: T-slot clamping jaw Core data Overall length: 160 mm Width: 22 mm T-slot compatibility: 20 mm, 22 mm Suitable for bolts: M20, M22 Special features Standard: DIN 6314 Packaging unit: 1 UID: 4000833007NW FAQ Is the clamping jaw suitable for both 20 mm and 22 mm T-slots? Yes. The AMF T-slot clamping jaw DIN 6314 is designed to fit both 20 mm and 22 mm T-slots, enabling use across different machine tables. Which bolt sizes are compatible with this clamping element? The clamping jaw accepts M20 and M22 bolts, providing direct compatibility with commonly used clamping hardware. Does the product conform to an industry standard? It does: the component is specified to DIN 6314, ensuring standardised dimensions and predictable interchangeability. What are the key dimensions to consider when integrating the part? The main dimensions are an overall length of 160 mm and a width of 22 mm; the part is intended for T-slot widths of 20 and 22 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Wedge for T‑Slot 16+18mm, For M16/M18 - AMF
Take advantage of standard conformity and versatile fit to streamline clamping tasks; the DIN 6316 compliance and compatibility with both 16 mm and 18 mm T-slots ensure smooth integration into existing fixtures. Order the AMF clamping iron directly via Metav Werkzeuge or consult our specialists for application advice. AMF clamping iron DIN 6316 for T-slot 16/18 mm, 160 mm The AMF clamping iron DIN 6316 for T-slot 16/18 mm, 160 mm is a standardised clamping component designed for secure fixture mounting in milling tables and machine beds with 16 mm or 18 mm T-slots. DIN 6316 compliant clamping component Fits T-slot widths 16 mm and 18 mm Overall length 160 mm for broad coverage Compatible with M16 and M18 fastening bolts Versatile fit for fewer spare parts and faster setup Compliance with DIN 6316 means this clamping iron is ready for direct replacement and interchangeability in a wide range of jigs and fixtures. The dual T-slot 16 mm / 18 mm compatibility reduces inventory complexity by covering two common slot sizes with a single component, cutting procurement and storage effort. As a result, machine setup and changeover are more efficient, leading to measurable time savings in repetitive production tasks. Secure clamping with predictable mounting behaviour An overall length of 160 mm provides a substantial contact surface for clamping, enabling reliable force distribution along the workpiece. The component is designed for use with M16 and M18 fastening hardware, ensuring mechanical compatibility with commonly used clamping bolts and studs. The combination of standard adherence and correct bolt pairing supports consistent clamping forces and repeatable positioning during machining operations. Practical workshop benefits and integration The straightforward geometry and standardised dimensions simplify assembly into existing tooling systems and reduce the need for bespoke adapters. Fewer bespoke parts translate into lower setup complexity and faster turnaround when fitting fixtures or replacing worn components. With the focus on function and fit, the clamping iron supports improved workflow and predictable machine availability across routine production or maintenance interventions. Reliable supply and technical guidance from a dedicated partner Procured via Metav Werkzeuge, customers benefit from a transparent supply chain and specialist advice rooted in a long-standing focus on precision tools and workshop equipment. Metav’s role as a central supplier helps consolidate purchasing for workshop managers seeking dependable sourcing for repeat items. For technical clarification regarding suitability for specific fixtures, bolt assemblies or machine tables, Metav’s product consultants can provide the necessary application details. Contact Metav Werkzeuge to confirm suitability and availability of the AMF clamping iron (SKU 4000833060NW) and to discuss integration into existing fixtures Technical Data Article number / SKU: 4000833060NW Manufacturer: AMF Product type: Clamping iron Label: Clamping iron DIN 6316 for T-slot 16+18 mm, length 160 mm Facts Standard: DIN 6316 T-slot widths: 16 mm, 18 mm Width: 18 mm Overall length: 160 mm Special features Suitable for bolts: M16, M18 Packaging unit: 1 UID: 4000833060NW FAQ Is this clamping iron compatible with both 16 mm and 18 mm T-slots? Yes. The AMF clamping iron is specified to fit T-slot 16 mm and T-slot 18 mm, allowing use in either slot width without modification. Which fastening sizes are intended for use with this component? The clamping iron is designed for use with M16 and M18 fastening bolts, ensuring standard mechanical compatibility with common clamping hardware. Does the part conform to an industry standard for interchangeability? Yes. The component conforms to DIN 6316, which supports predictable dimensions and interchangeability across compatible fixtures and systems. What benefits does the 160 mm length provide? A 160 mm overall length offers extended contact area for clamping, improving force distribution and reducing the likelihood of local deformation under clamping loads. Can this clamping iron be used to replace existing DIN 6316 parts directly? In most cases, the AMF clamping iron can replace other DIN 6316 parts directly when slot width and bolt compatibility match the machine’s specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Fork Jaw Clamping Wedge Slot 14mm For M12 M14 Screw - AMF
Take advantage of the fork design No. 6315GN, the 14 mm slot width and the 160 mm length for reliable fixture integration; these features ensure straightforward compatibility with common clamping screws M12 and M14 and support efficient clamping setups. Order the component directly via Metav Werkzeuge or consult the team for application-specific advice. Fork clamping bar No. 6315GN – Fork design, 14 mm slot, 160 mm length (AMF) The Fork clamping bar No. 6315GN is a fork-style clamping element intended for modular fixturing and machine-tool clamping where M12 and M14 screws are used Fork design No. 6315GN for firm hold Slot width 14 mm for standard clamping bolts Overall length 160 mm for compact fixtures Compatible with M12 and M14 clamping screws Faster, more reliable fixture set-up with a fork-style clamping element The fork-style clamp offers a clear mechanical advantage for modular fixtures: the fork design simplifies engagement with clamping screws and reduces slippage during tightening. With a slot width of 14 mm and a total length of 160 mm, this clamping bar suits compact set-ups where predictable engagement depth and lateral guidance are required. The specified compatibility with M12 and M14 clamping screws streamlines procurement and reduces assembly time, making the component a pragmatic choice for workshops and production cells that require repeatable clamping cycles and minimal adjustment effort. Compatibility and practical benefits for production and workshop applications Integrating this clamping bar into a subassembly or fixture benefits process reliability. The fork geometry aligns the clamping screw centrally in the slot, providing steady force transmission and facilitating correct torque transfer for secure workpiece retention. The clear specification for screw sizes—M12 and M14—helps planners choose suitable fastenings and torque settings without additional measuring. As a compact clamping element, it supports efficient workholding where mounting space is limited while maintaining stable clamping behaviour under standard operational conditions. Quality assurance and logistical advantages for procurement The product is offered as a single packaged unit and is listed under SKU 4000833038NW, which aids inventory control and traceability. The defined dimensional parameters (slot width, effective length and enrichment dimensions) provide a verifiable basis for design decisions and compatibility checks in CAD and BOM documentation. Selecting standardised components such as this fork clamp reduces supplier complexity and supports consistent fixture assembly across multiple machines. For buyers focused on dependable, straightforward components, the clear technical definition reduces uncertainty during procurement and accelerates commissioning. Contact Metav Werkzeuge for tailored advice on integrating the AMF fork clamping bar No. 6315GN into existing fixturing systems or for guidance on matching clamping screws and torque settings; Metav’s specialists can advise on compatibility and supply from stock at the Emmerich facility. Technical data Article number / SKU: 4000833038NW Type designation: Gabelausführung Nr. 6315GN Product type: Clamping bar (Spanneisen) Label: Gabelspanneisen Nr.6315GN Schlitz-B.14mm L.160mm f.Spannschraube M12,M14 AMF Numbers / Facts Slot width: 14 mm Overall length (L1): 160 mm Axite enrichment: A: 25; B2: 40; B3: 24; L1: 160; L2: 47; L3: 30 Packaging unit: 1 Special features / Versions Fork design No. 6315GN Compatible with clamping screws M12 and M14 Compact footprint for space-limited fixtures Manufacturer brand: AMF FAQ Which clamping screw sizes fit the fork clamping bar? The fork clamping bar is specified for use with M12 and M14 clamping screws. What is the slot width and why does it matter? The slot width is 14 mm; this dimension determines compatible bolt shank clearance and engagement for stable clamping. What is the overall length of the clamping bar? The overall length is 160 mm, suitable for compact fixture arrangements. How are the enrichment dimensions defined? Enrichment data are listed as A: 25; B2: 40; B3: 24; L1: 160; L2: 47; L3: 30 and describe the principal mounting and engagement geometry. What is the item reference for ordering and inventory? Ordering and inventory reference is SKU 4000833038NW for the AMF fork clamping bar No. 6315GN. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Fork-Type Clamp Bar Slot Width 18mm For M16 M18 Clamping Screw, DIN 6315B - AMF
The DIN‑compliant fork design and 18 mm slot width deliver reliable engagement with standard clamping screws, while the 160 mm length provides stable reach for workshop fixtures. Combine standard conformity, robust engagement and straightforward integration for dependable clamping performance. Order directly via Metav Werkzeuge or consult our technical advisors for specification support. AMF Fork-style clamping bar DIN 6315B – 18 mm slot, 160 mm length The AMF fork-style clamping bar DIN 6315B is a standardised clamping element intended for workshop and industrial fixturing, designed to accept M16 and M18 clamping screws and to integrate smoothly into modular clamping systems DIN 6315B standardised design Fork-style for precise engagement 18 mm slot width for M16/M18 screws Robust 160 mm length for firm clamping Standardised interchangeability for reliable setups The fork execution of this clamping bar follows the DIN 6315B specification, which guarantees mechanical compatibility with standard clamping screw interfaces. Standard conformity means fewer measurement checks and predictable fit when combining components from different suppliers. The DIN reference is particularly valuable in production environments where repeatability and quick reconfiguration are required, as the fork clamp mates consistently with M16 and M18 clamping screws to reduce set‑up time and minimise alignment adjustments. Practical benefits in everyday clamping tasks With an 18 mm slot and a total length of 160 mm, the component provides a balance between compactness and reach: the slot width secures engagement with typical workshop clamping screws, while the length offers clearance for fixtures and workpieces. The fork geometry supports secure axial location and fast engagement, which translates into fewer interruptions during batch changeovers. Where consistent clamping force and positional stability are required, this clamping bar improves throughput by simplifying the mechanical interface between screw and fixture. Integration, handling and selection guidance The clamping bar is supplied as a single unit and is intended for direct incorporation into existing fixture plates and tooling assemblies. Selection is driven by the required screw thread size and the desired engagement geometry; in this case, suitability for M16 and M18 screws ensures compatibility with common clamping hardware. The simple fork design also facilitates inspection and visual confirmation of correct engagement, supporting efficient quality control without complex procedures. For modular systems, the standardised form factor reduces inventory complexity and speeds up maintenance cycles. For application advice on the AMF fork‑style clamping bar or for help selecting compatible clamping screws and fixtures, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical guidance. Technical data Article number: 4000833026NW SKU: 4000833026NW Label: Gabelspanneisen DIN 6315B Schlitz-B.18mm L.160mm f.Spannschraube M16,M18 AMF Manufacturer: AMF Dimensions & capacities Slot width: 18 mm Total length: 160 mm For clamping screws: M16, M18 Features & compatibility Type: Fork design (Gabelausführung) Standard: DIN 6315B Product type: Clamping bar (Spanneisen) Packaging unit: 1 Addition values: A: 30; B2: 48; B3: 15; B4: 8 FAQ What standard does this clamping bar conform to? The AMF fork‑style clamping bar conforms to DIN 6315B, ensuring standardised mating dimensions for predictable integration into fixtures. Which clamping screws fit this fork clamp? The component is suitable for M16 and M18 clamping screws and is designed for secure engagement with those common thread sizes. What are the critical dimensions to check before installation? Key dimensions are the 18 mm slot width and the 160 mm total length; these determine engagement compatibility and reach within the clamping setup. How does the fork design affect clamping performance? The fork geometry provides positive axial location and fast mechanical engagement, improving repeatability and reducing time required for repositioning in production environments. Is the clamping bar supplied ready for immediate integration? Yes, the AMF clamping bar is delivered as a single unit (packaging unit: 1) and is intended for immediate incorporation into fixture plates and modular clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Forked Clamping Wedge Slot B14 For M12 M14 Clamping Screw DIN 6315B - AMF
Take advantage of standardised, repeatable fixturing with a fork-style clamping bar that combines DIN 6315B conformity and a precise 14 mm slot for reliable alignment; its 160 mm length and compatibility with M12 and M14 clamping screws support efficient setup and consistent production. Order via Metav Werkzeuge or consult the specialists for application advice. Fork-style clamping bar DIN 6315B — 14 mm slot, 160 mm (AMF) The Fork-style clamping bar DIN 6315B is a fork-design clamping component for standardised fixture systems, engineered for secure axial positioning and compatibility with common clamping screws. DIN 6315B compliant 14 mm slot width 160 mm overall length Compatible with M12 and M14 clamping screws Consistent, standard-compliant fixturing for repeatable production Compliance with DIN 6315B provides a clear, industry-recognised basis for interchangeability and fixture planning. By using a component that adheres to a known standard, setup variance is reduced and tool lists become predictable, which supports faster fixture changeovers and fewer alignment checks. The focus on conformity enables planners and operators to integrate the part into existing clamping systems without bespoke adapters, helping to maintain process stability and minimise downtime. Secure clamping and simple mechanical compatibility The fork design with a 14 mm slot and 160 mm length offers precise seating for fork-style fixtures and allows safe engagement with standard clamping screws M12 and M14, ensuring a robust hold under axial load. The slot width denotes the gap for the mating tongue on the clamping element; matching this dimension to fixture tongues prevents play and improves force transmission. Compatibility with two common screw sizes increases flexibility in workshop setups and reduces the need for multiple variant parts. Practical workshop benefits and handling advantages A fork-style clamping solution streamlines assembly and replacement procedures within the clamping assembly: the open fork enables quick positioning and visual alignment, which accelerates repeat setups on jigs and fixtures. The component’s straightforward geometry simplifies inspection and measurement routines, so maintenance intervals and checks can be planned efficiently. Traceability for ordering and stock control is supported by the clear SKU reference, aiding procurement and inventory management in busy production environments. Secure consistent clamping with AMF fork-style clamping bars — order via Metav Werkzeuge in Emmerich or contact the specialists at info@metav-werkzeuge.com / +49 2822 7131930 to confirm suitability for the intended fixture system Technical data Article number: 4000833024NW Product: Fork-style clamping bar (Spanneisen) Brand: AMF Facts Slot width: 14 mm Overall length: 160 mm Compatible with clamping screws: M12, M14 Packaging unit: 1 Special features Fork design for positive engagement Conforms to DIN 6315B Intended for standard clamping screw use FAQ What standard does this clamping bar conform to? The clamping bar complies with DIN 6315B, ensuring compatibility with fixture systems designed to that standard. Which clamping screw sizes are compatible? Compatibility is specified for M12 and M14 clamping screws to match common workshop hardware. What does the 14 mm slot indicate? The 14 mm slot denotes the fork gap for the mating tongue, which determines fit and axial stability in the clamping assembly. How long is the component and how does that affect use? The component has an overall length of 160 mm, offering sufficient reach for many standard fixture layouts and aiding leverage and positioning. Is the product ready for immediate integration in existing systems? Designed to the DIN 6315B standard and compatible with M12/M14 screws, the clamping bar is suitable for direct integration into compliant clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm T-Slot Clamping Wedge For T-Nut 16+18mm, DIN 6314 - AMF
Take advantage of robust steel construction, T‑slot compatibility for 16 and 18 mm, and a compact 160 mm length to secure fixtures reliably in milling and clamping setups; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. AMF Spanneisen DIN 6314 – T‑slot clamp for 16 + 18 mm, L 160 mm The AMF Spanneisen DIN 6314 is a heavy‑duty T‑slot clamp engineered for secure workholding in 16 mm and 18 mm T‑slot systems, ideal for milling fixtures and modular clamping tables. Robust steel construction for stable clamping Compatible with T‑nut 16 and 18 mm Length 160 mm for versatile fixture setups Secure clamping that meets DIN 6314 standards The clamp is produced to DIN 6314, ensuring a defined geometry and repeatable performance in industrial environments. Its robust steel construction delivers high contact pressure across the clamping surface, which reduces movement under cutting loads and vibration. Designed to accept standard fasteners for M16 and M18, the component integrates directly into common clamping assemblies, removing ambiguity when planning fixtures. For purchasers seeking predictability, the standardised design supports interchangeability and faster setup times on production lines. Flexible compatibility for faster fixture configuration With compatibility for both 16 mm and 18 mm T‑slots, the clamp simplifies layout decisions and reduces the number of specialised parts required. The 160 mm length offers a balance between reach and rigidity, making it suitable for small to medium workpieces without compromising stability. For users less familiar with T‑slot systems: the clamp slides into the slot and is secured with the corresponding T‑nut, translating clamping force into a locked position that resists lateral and lifting forces. This reduces rework and accelerates changeovers in job shops and toolrooms. Durable supply and quality assurance from a trusted partner Supplied as a single unit (packaging unit: 1), the clamp is specified for repetitive industrial use and straightforward inventory management. The straightforward geometry and absence of delicate coatings mean maintenance is limited to routine inspection and torque control of the fasteners. Metav Werkzeuge’s role as a central supplier adds an extra layer of confidence: local stock in Emmerich acts as a quality filter for the European market and enables dependable fulfilment. For workshops seeking reliable, standardised clamping components, this T‑slot clamp combines predictable performance with ease of procurement. For application advice, compatibility checks or prompt supply from Metav Werkzeuge in Emmerich, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance for secure and efficient fixturing with AMF clamping solutions Technical data Article number: 4000833006NW Standard: DIN 6314 Brand: AMF Product type: T‑slot clamp Dimensions & compatibility Length: 160 mm Width: 18 mm T‑slot compatibility: 16 + 18 mm Fastener sizes: M16, M18 Special features Packaging unit: 1 Axite enrichment values: A: 25; B2: 50; B3: 18; E1: 26; E2: 65 FAQ What T‑slot sizes does the clamp fit? The clamp fits 16 mm and 18 mm T‑slot systems as specified by the T‑slot compatibility values. Which fasteners are compatible with this clamp? This clamping component is suitable for use with M16 and M18 fasteners in standard fixture assemblies. Is the clamp supplied individually or in sets? The product is supplied as a single unit; the packaging unit indicated is 1. What standard governs the clamp geometry? The geometry and interchangeability conform to DIN 6314, ensuring repeatable positioning and compatibility with defined clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Clamping Wedge For T-Slot 18mm Clamping Height 13-46mm With M16x125 Clamping Screw - AMF
Take advantage of a compact clamping solution that secures workpieces in an 18 mm T‑slot, offers an adjustable clamping height of 13–46 mm and includes a M16 x 18 x 125 clamping screw for immediate integration; order directly via Metav Werkzeuge or ask our consultants for technical guidance. Clamping iron No. 6314V — T‑slot clamp for 18 mm, H 13–46 mm (AMF) The Clamping iron No. 6314V is a robust T‑slot clamping element designed for secure workpiece fixation on 18 mm T‑slot tables in machining and fixture setups. T‑slot compatibility 18 mm Adjustable clamping height 13–46 mm Includes M16 x 18 x 125 clamping screw Compact 18 mm width for tight setups Precise hold for efficient setups The primary advantage of this clamping element is its ability to provide a secure, repeatable hold across different workpiece heights thanks to the 13–46 mm clamping range. Combining a narrow profile with a dedicated clamping screw means fewer fixture changes and faster setup times on milling machines and universal worktables. The T‑slot design simplifies alignment and ensures the clamping force is transferred directly to the workpiece, reducing slippage and improving process reliability. For production environments where changeover speed matters, the balanced geometry of the clamp reduces adjustment steps and contributes to a steadier workflow. Space-saving form for compact fixtures With a nominal width of 18 mm and an overall length of 125 mm, this clamp is conceived for dense fixture arrangements where space is at a premium. The slim footprint enables closer positioning of multiple clamps without compromising access for tools or coolant. The compact dimensions also help when retrofitting existing setups: the piece will fit into standard 18 mm T‑slots while leaving room for adjacent clamping elements or measuring probes. The restrained form factor supports modular clamping strategies and helps maintain clear sightlines to the machining zone during operation. Simple integration and standardised fastening Threaded for M16, the clamp accepts standard clamping screws and nuts used across workshops, and the delivery includes a M16 x 18 x 125 clamping screw to allow immediate mounting. The choice of an M16 thread provides a widely available, robust interface that balances tensile strength and ease of handling. For those new to clamping technology: the M16 designation refers to the metric thread nominal diameter, while the screw length and head geometry determine reach and clamping leverage. Using standardised components reduces tooling inventory and simplifies maintenance. Built for workshop reliability From small jobbing shops to production cells, the unit is designed to deliver consistent performance under repeated use. The combination of precise sizing for 18 mm T‑slots, a variable clamping height and an included screw reduces the chance of incompatible hardware arriving on the bench. The clamp's straightforward functionality supports efficient fixturing routines and promotes predictable machining results, which in turn shortens inspection cycles and minimises rework. For procurement, the compact specification helps planners assess compatibility quickly and with confidence. For technical advice or delivery details on this AMF T‑slot clamp, contact Metav Werkzeuge for tailored support and prompt dispatch from Emmerich. Technical Data SKU: 4000833075NW Type: No. 6314V Manufacturer: AMF Product type: Clamping iron Clamping screw included: M16 x 18 x 125 Facts T‑slot width: 18 mm Clamp width: 18 mm Clamping height: 13–46 mm Total length: 125 mm Thread: M16 Packaging unit: 1 Additional dimensions: A: 25; B2: 50; E1: 26; E2: 45; LS: 55 Special features Designed for 18 mm T‑slot systems Adjustable clamping height for varied workpieces Includes standard M16 clamping screw for immediate use Compact profile for dense fixturing Type No. 6314V by AMF FAQ Is this clamp compatible with other T‑slot sizes? The clamp is designed specifically for an 18 mm T‑slot; compatibility with other slot sizes is not supported without adapter elements. What clamping height range does the product cover? The clamping height range is 13–46 mm, allowing secure fixation of parts with varying thicknesses. Does the delivery include the clamping screw? Yes, the delivery contains a M16 x 18 x 125 clamping screw as specified for immediate mounting. Which thread standard is used and what does M16 mean? The clamp uses an M16 metric thread; M16 indicates a 16 mm nominal thread diameter common in workshop fastenings. Can multiple clamps be used close together on the same table? The 18 mm width and 125 mm length are intended to allow close placement for dense fixture arrangements while preserving access for machining tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-133mm Clamping Jaw for T-Slot 24/28mm, M24 Thread - AMF
Take advantage of a compact, versatile clamping solution that combines broad T‑slot compatibility with a wide clamping height range and standard M24 interfacing for efficient fixture setups. Order the Clamping Jaw directly via Metav Werkzeuge or consult our specialists for precise application advice. Clamping Jaw No. 6314V – Clamping jaw for 24/28 mm T‑slots, M24 thread (AMF) The Clamping Jaw No. 6314V is a heavy‑duty clamping component designed for machining fixtures and workholding systems, compatible with both 24 mm and 28 mm T‑slots and engineered to accept standard M24 clamping hardware. Clamps T‑slots 24 mm and 28 mm Wide clamping height 20–133 mm M24 thread for standard clamping bolts Robust 200 mm overall length Secure, adaptable clamping for faster fixture setup The design delivers precise, repeatable holding across a 20–133 mm clamping height, enabling a wide range of workpiece sizes to be secured without auxiliary adapters. Compatibility with 24 mm and 28 mm T‑slots ensures direct integration into common machine tables and fixture plates, reducing setup time and tool changeover. The use of a standard M24 thread means the component mates with widely available clamping bolts, simplifying inventory and procurement decisions while supporting consistent clamping force for stable machining. Built to support reliable production cycles A compact overall length of 200 mm combined with a nominal width of 26 mm provides a sturdy contact surface that maintains alignment under load. The engineered profile promotes uniform pressure distribution across the clamped part, which helps lower vibration and minimise rework. Precision‑manufactured tolerances contribute to predictable repeatability in batch production, so operators and planners can rely on consistent part quality and reduced inspection effort during long runs. Practical procurement and integration benefits for workshops Supplied as a single unit, the component fits seamlessly into existing workholding inventories and aligns with standard industrial fastening practices through its M24‑compatible interface. The straightforward specification reduces the need for bespoke parts and supports consolidation of suppliers for fixture hardware. For customers requiring application guidance, Metav provides technical advice and clear product data to assist selection and ensure the component meets the intended machining requirements. The compact design is particularly suitable for milling fixtures and general clamping tasks in metalworking environments. Contact Metav Werkzeuge for tailored clamping recommendations and specify Clamping Jaw No. 6314V (AMF) for prompt technical guidance and delivery from Emmerich. Technical data Article number: 4000603028NW Type: Nr. 6314V Brand: AMF Product type: Clamping jaw Data T‑slot compatibility: 24 + 28 mm Clamping height: 20 - 133 mm Overall length: 200 mm Width: 26 mm Thread: M24 Pack unit: 1 UID: 4000603028NW Special features Suited for standard M24 clamping systems Compact, robust profile for stable holding Designed for direct use in T‑slot tables Simplifies fixture inventory and setup FAQ What T‑slot sizes does this clamping jaw fit? The clamping jaw fits both 24 mm and 28 mm T‑slots, enabling direct mounting on common machine tables without adapters. What is the usable clamping height range? The device provides a clamping height range of 20–133 mm, allowing secure holding of a broad range of workpiece dimensions. Which thread size is required for the clamping bolts? Clamping bolts or studs with an M24 thread are compatible with the clamping jaw and are the recommended standard for installation. Is the clamping jaw suitable for general milling fixtures? Yes, the geometry and dimensions make the clamping jaw suitable for milling fixtures and standard workholding applications where T‑slot mounting is used. How is the product delivered for procurement purposes? The item is supplied as a single unit (pack unit 1) and is identified by article number 4000603028NW for ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Bar for T-Slot 20/22mm, DIN 6316 - AMF
Take advantage of a standardised, fast and reliable clamping solution that supports both 20 mm and 22 mm T-slots and is suited for M20 and M22 fastenings; secure procurement and expert advice are available through Metav Werkzeuge for seamless workshop integration. AMF clamping bar (DIN 6316) for T-slot 20 + 22 mm, 200 mm The AMF clamping bar (DIN 6316) is a compact, machine-table clamping component designed for secure fixture work in benches and milling tables with 20 mm and 22 mm T-slots. DIN 6316 compliance for standardised clamping Fits T-slots 20 mm and 22 mm Length 200 mm for versatile use Compatible with M20 and M22 fastenings Faster setups through a standards-based fixture The DIN 6316 specification ensures that the clamping geometry and interfaces adhere to established workshop norms, which reduces fitting ambiguity and streamlines setup procedures. With a repeatable geometry, changeovers become more predictable and setup time is reduced, helping to keep machine downtime to a minimum. This benefit is particularly relevant for production environments where process reliability and rapid fixture exchange matter. One component for two common T-slot sizes Designed to work with both 20 mm and 22 mm T-slot systems, the clamping bar eliminates the need to hold separate stocks for each slot size. Compatibility with M20 and M22 fastenings further simplifies inventory and tooling decisions, allowing a single fixture element to serve multiple table standards. The resulting consolidation supports leaner stores and fewer procurement lines without sacrificing flexibility. Reliable hold and predictable performance in everyday use Engineered and manufactured to comply with the stated standard, the clamping bar delivers consistent interface fits and predictable clamping behaviour. The standard conformity supports repeatable clamping forces and accurate positioning, which contributes to improved process stability and reduced rework. For workshops aiming for dependable results across routine machining, the standardised component is a straightforward way to raise consistency without complex retrofitting. For straightforward integration and dependable supply of AMF clamping components, contact Metav Werkzeuge for ordering and product selection support—Metav Werkzeuge offers technical advice and reliable delivery from Emmerich to your workshop. Technical Data Article number: 4000833062NW Norm: DIN 6316 Designation: Spanneisen DIN 6316 for T-slot 20+22 mm L.200 mm AMF Product type: Clamping bar Manufacturer: AMF Packaging unit: 1 Facts Width: 22 mm Total length: 200 mm T-slot compatibility: 20 + 22 mm Suitable for: M20, M22 Special features Standardised interface to DIN 6316 Dual T-slot compatibility (20 mm and 22 mm) Direct fit for M20 / M22 fastenings Compact 200 mm length for versatile clamping FAQ What tables will this clamping bar fit? The clamping bar is suitable for machine tables and fixtures with 20 mm or 22 mm T-slots, offering direct compatibility without adaptors. Can this component be used with M20 and M22 bolts? Yes, the design supports fastenings in M20 and M22, enabling secure attachment to standard clamping systems. Is the clamping geometry compliant with an established standard? The clamping bar meets DIN 6316, guaranteeing standardised interface geometry and predictable fit on compliant tables. What length is the clamping bar and how does that affect use? At 200 mm overall length, the bar provides a compact clamping span suitable for tight fixtures and modular setups where space is limited. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Bar T-Slot 24/28mm DIN 6316, For M24 Thread - AMF
Take advantage of standardised compatibility, robust clamping performance and simple integration into existing T‑slot table setups — order the component via Metav Werkzeuge or contact our consultants for specification matching. AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm offers a standardised clamping solution for machine tables with T‑slots of 24 and 28 mm, designed to integrate with M24 clamping systems. Standardised DIN 6316 compliance Fits T‑slot 24 and 28 mm 200 mm usable length Compatible with M24 clamping bolts Predictable clamping performance for production environments Built to the requirements of DIN 6316, this clamping component delivers consistent clamping force across repeated cycles, reducing set‑up variability. The standard ensures that the part interfaces correctly with industry‑standard fixtures, which streamlines tool changes and shortens machine down‑time. The measured geometry and finish contribute to stable seating in the slot, which supports repeatable machining tolerances and protects workpiece alignment over longer runs. Flexible fit for common T‑slot sizes reduces tooling complexity Designed for T‑slot widths 24 mm and 28 mm, the component removes the need for multiple bespoke clamps for different tables. The dual‑slot compatibility and M24 thread suitability mean existing clamping bolts and accessories can be re‑used, lowering inventory complexity. The adaptable fit is particularly beneficial for mixed‑workshop environments where machines from different eras or manufacturers coexist. Straightforward integration and clear installation benefits With a usable length of 200 mm, the clamping element is suitable for a wide range of fixtures and workpiece dimensions while keeping the installation simple. The plain, engineered geometry allows quick placement in the slot and standard torque application of M24 hardware, supporting rapid set‑up. Clear dimensional conformity aids maintenance planning and spare‑part management, helping to maintain uptime and predictable production throughput. For standardised and reliable clamping choose the AMF clamping iron and contact Metav Werkzeuge for specification advice and fast supply direct from Emmerich Technical data Article number: 4000833063NW Label: Spanneisen DIN 6316 f.T-Nut 24+28mm L.200mm AMF Type: Clamping iron Standard: DIN 6316 Manufacturer: AMF Facts T‑slot compatibility: 24 + 28 mm Width: 26 mm Total length: 200 mm Fits thread: M24 Axite enrichment: Addition: A: 35; B2: 70; B3: 35; C: 25; E1: 76,5; E2: 60 Special features Packaging unit: 1 UID: 4000833063NW FAQ Which standard does this clamping component meet? The clamping iron conforms to DIN 6316, ensuring standardised dimensions and compatibility for table clamping applications. Which T‑slot sizes are supported? The component is designed for T‑slot 24 and 28 mm, enabling use across common machine tables without special adapters. What thread size is required for bolts? The part is compatible with M24 clamping bolts, matching typical heavy‑duty clamping hardware. What is the usable length of the clamping element? The total length is 200 mm, offering a practical clamping span for a broad range of workpieces. Is this component suitable for mixed workshop setups? Yes, the dual T‑slot compatibility and standard thread interface make the clamping iron well suited to mixed environments where flexibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Wedge For T-Slot 20/22mm, DIN 6314 - AMF
Take advantage of the combination of standardised design and straightforward compatibility: a compact clamp built to DIN 6314 for secure fixation in T‑slots 20 and 22 mm, with a 200 mm length that suits many fixture arrangements. Order directly via Metav Werkzeuge or request specialist advice if application specifics require clarification. Clamping Bar DIN 6314 (AMF) – for T‑slot 20 + 22 mm, 200 mm A Clamping Bar DIN 6314 engineered to secure workpieces in machine‑table T‑slots 20 and 22 mm, suitable for fixtures using M20 or M22 fittings. Conforms to DIN 6314 standard Fits T‑slots 20 and 22 mm Length 200 mm for flexible setups Compatible with M20 and M22 fittings Secure clamping engineered for machine tables The clamping bar follows the DIN 6314 specification, ensuring dimensional compatibility with established fixture systems and repeatable performance across setups. Use in T‑slots of both 20 mm and 22 mm reduces the need for adapters and supports consistent positioning. This standard conformity means fewer alignment checks and a predictable interface with common clamping elements, contributing to shorter set‑up times and improved process reliability. Versatile integration with existing fixtures With an overall length of 200 mm and a working width of 22 mm, the component integrates cleanly into modular clamping arrangements. Compatibility with M20 and M22 fittings allows the bar to accept widely used stud and nut sizes, making it simple to combine with established clamping hardware. The compact dimensions favour cramped or multi‑station tables where space optimisation and flexible placement are essential for efficient throughput. Practical benefits for everyday workshop use Selecting a standardised clamping solution reduces complexity in inventory and speeds decision‑making during job changes. The compatibility with common T‑slot sizes and thread standards supports cross‑machine use, limiting the number of unique parts required. Fewer specialised components mean less downtime for replacements and a more resilient workshop supply chain, which is particularly valuable in small to medium‑sized fabrication environments. Technical clarity for procurement and planning Specifying a component to a recognised norm simplifies procurement checks and quality assurance procedures. The standard reference and clear dimensional data provide a verifiable basis for ordering and for cross‑referencing with existing fixtures and tooling. Where exact machine table tolerances or fixture geometries must be checked, the normative designation facilitates direct comparison with technical drawings and supplier catalogues. For reliable fixture integration with the AMF clamping bar, contact Metav Werkzeuge for fast supply and expert product guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833008NW Label: Spanneisen DIN 6314 f.T‑Nut 20+22mm L.200mm AMF Product type: Clamping bar Manufacturer: AMF Facts Standard: DIN 6314 T‑slot: 20 + 22 Width: 22 mm Overall length: 200 mm Suitable for: M20, M22 Packaging unit: 1 Special features Conforms to machine‑table clamping norms Simple integration into standard fixtures Axite enrichment: Addition: A: 30; B2: 60; B3: 22; E1: 30; E2: 80 FAQ What standard does this clamping bar comply with? The clamping bar is specified to DIN 6314, providing a recognised norm for dimensions and interface with machine‑table systems. Which T‑slot sizes are supported? This item supports T‑slots 20 mm and 22 mm, enabling direct use in tables designed for either slot profile. Is the bar suitable for M20 and M22 fastenings? Yes, the component is suitable for fittings and studs in M20 and M22 sizes. What is the overall length and width of the clamp? The bar has an overall length of 200 mm and a working width of 22 mm, suited to compact and modular setups. Does the product include mounting hardware? The product is supplied as a single unit (packaging unit: 1); separate mounting elements are not listed in the specification Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com