0.8-10mm Gear Chuck Drill Chuck 1/2”-20 Thread Right and Left Rotation With Key S2A - RÖHM
Take advantage of the robust, hammer-drill‑resistant design and the wide 0.8–10 mm clamping range combined with a 1/2"-20 mounting to ensure reliable, versatile drilling performance; order the chuck via Metav Werkzeuge or contact our specialists for application advice. RÖHM Prima Geared Drill Chuck — 0.8–10 mm, 1/2"-20 mount The RÖHM Prima geared drill chuck for precision clamping in both clockwise and counterclockwise drilling applications Capacity 0.8–10 mm 1/2"-20 mounting thread Hammer‑drill resistant, through‑drilled design Supplied with key S 2 A Precision clamping that keeps production moving The geared drill chuck delivers a predictable and secure grip across a 0.8–10 mm range, making it suitable for a broad variety of workshop tasks where repeatable hole quality is required. The geared design converts hand or machine torque into consistent jaw closing force, which reduces slippage and ensures that drill bits remain concentric during operation. With a standard 1/2"-20 mounting, the chuck is compatible with many drill stands and handheld machines commonly used in industrial and trade environments. The direct consequence for production is fewer tool changes and less downtime, supporting a smoother workflow and higher first‑time accuracy. Built to withstand demanding drilling conditions Designed for use in robust environments, the chuck features a hammer‑drill resistant and through‑drilled construction that permits coolant flow and debris evacuation where relevant. The internal thread allows secure attachment to drivers with matching mounts, while the ability to operate in both right‑ and left‑hand rotation increases flexibility for tasks such as screw removal or re‑threading. The set includes a key of size S 2 A, enabling secure tightening and loosening of the jaws for repeated bit changes. These technical attributes translate into lower wear on the bit shank and improved runout stability during prolonged or heavy‑duty use. Installation, compatibility and straightforward maintenance Attachment to a host tool is via the 1/2"-20 thread; care when matching the mount ensures correct seating and concentricity. The through‑drilled feature aids in cleaning and flushing the spindle bore after use, which helps maintain smooth jaw movement and prolongs service life. Routine maintenance is limited to periodic cleaning, light lubrication of the jaw slideways and inspection of the key engagement; such simple measures keep the chuck operating within tolerance. The geared mechanism is forgiving with standard workshop twist drills and accessories, allowing easy integration into existing toolsets without special adaptors. Why this chuck is a sensible workshop investment Combining a wide clamping range with a proven geared mechanism and robust construction, this chuck supports versatile drilling tasks while reducing the likelihood of bit slippage and premature wear. The reversible rotation capability broadens the range of applications, from routine drilling to tasks requiring counter rotation, and the supplied S 2 A key provides reliable torque transfer for safe clamping. For procurement and maintenance planners, the chuck represents a practical compromise between precision and durability that suits both trade workshops and light industrial production. For workshop‑ready clamping with reversible operation and hammer‑drill resilience, request the RÖHM Prima geared drill chuck via Metav Werkzeuge or speak to our advisors at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application support Technical Data Article number: 4000832020NW SKU: 4000832020NW Type: Prima Product type: Geared drill chuck Facts Clamping range: 0.8–10 mm Mounting: 1/2"-20 Key size: S 2 A Rotation: right and left Special features internal thread hammer‑drill resistant through‑drilled supplied with key suitable for right‑ and left‑hand rotation FAQ Is this chuck suitable for use with hammer drills? Yes. The chuck is described as hammer‑drill resistant, which permits use in applications where hammering action is present; proper machine compatibility should be verified before heavy hammer use. What mounting does the chuck require? The chuck uses a 1/2"-20 mounting thread and will fit drivers or adaptors designed for that thread standard. Which bit diameters can be clamped? The clamping range spans 0.8–10 mm, enabling secure holding of common twist drills and small tooling within that range. Does the product come with a key, and what size is it? A tightening key is included; the specified key size is S 2 A for reliable jaw engagement. Can the chuck be used for left‑hand drilling operations? Yes. The chuck is suitable for both right‑ and left‑hand rotation, allowing use in reversing operations where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.8-10mm Pinion Drill Chuck With Key, Through-Hole, Reversible Rotation, 3/8"-24 Thread - RÖHM
Take advantage of secure clamping, versatile rotation capability and through-drilled flexibility for efficient workshop use; order the RÖHM Prima gear-type drill chuck directly via Metav Werkzeuge or contact our consultants for application advice. RÖHM Prima gear-type drill chuck – keyed, 0.8–10 mm, 3/8"-24 mount The RÖHM Prima is a keyed gear-type drill chuck designed for general workshop and production drilling, compatible with 3/8"-24 spindles and suitable for both right- and left-hand rotation. Clamping range 0.8–10 mm 3/8"-24 mounting thread Drilled-through and impact-drill-proof Keyed operation with S 2 A key Precision clamping for repeatable drilling results The chuck delivers a consistent clamping performance across its 0.8–10 mm range, translating into reproducible hole quality and reduced rework. The 3/8"-24 mounting makes it compatible with a wide range of bench and handheld drills common in metalworking and maintenance shops. Because the mechanism is a gear-type design, radial runout is minimised, which supports accurate centre-to-centre spacing in serial tasks and aids higher process stability on production lines. Robust construction for heavy-duty and impact use Built to withstand demanding conditions, this chuck is drilled-through to allow through-shank drilling and is rated impact-drill-proof, so it endures intermittent hammering forces without loss of grip. The inclusion of a keyed drive with a S 2 A key ensures torque can be transmitted reliably without slippage, which is particularly valuable when working with tougher materials or larger drill diameters. These features reduce tool change frequency and extend service intervals. Versatility in rotation and installation for flexible applications Designed for right- and left-hand rotation, the chuck supports reversible toolholders and processes that require alternating directions. The internal thread and straightforward mounting allow rapid installation on compatible spindles, while the keyed operation keeps maintenance simple. For workshops seeking dependable, easy-to-service clamping hardware, this gear-type chuck delivers practical uptime benefits and straightforward integration into existing toolsets. For expert advice on integrating the RÖHM Prima gear-type drill chuck into workflows or to arrange supply from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832019NW SKU: 4000832019NW Product type: Gear-type drill chuck Brand: RÖHM Facts Clamping range: 0.8–10 mm Mounting thread: 3/8"-24 Key size: S 2 A Packaging unit: 1 Special features Drilled-through Impact-drill-proof Internal thread For right- and left-hand rotation Keyed operation (S 2 A) FAQ What clamping range does this chuck cover? The clamping range is 0.8–10 mm for the RÖHM Prima gear-type drill chuck, suitable for small to medium drill diameters. Which spindle thread fits this chuck? This chuck fits a 3/8"-24 mounting thread as specified for the RÖHM Prima (SKU 4000832019NW). Can the chuck be used on reversing drills? Yes, the chuck is designed for right- and left-hand rotation and is suitable for reversible drilling applications. Is the chuck suitable for use with impact or hammer drills? The chuck is described as impact-drill-proof and drilled-through, so it is built to tolerate intermittent impact forces while maintaining clamping integrity. What key is required to tighten the chuck? A key of size S 2 A is required for the keyed operation of this gear-type drill chuck. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5-13mm Gear Chuck With Key, B12 Mount, Right-Hand Rotation - RÖHM
Take advantage of the robust B 12 taper, broad 1.5–13 mm clamping range and heavy-duty, impact-proof construction to maintain precise, uninterrupted drilling in stationary machines; order the chuck via Metav Werkzeuge or consult our specialists for system integration. RÖHM Prima geared drill chuck – B 12 taper, 1.5–13 mm clamping The RÖHM Prima geared drill chuck for stationary machines, designed for right-hand rotation and hard industrial use, provides secure spindle connection and reliable clamping for a wide range of drills. B 12 taper for secure spindle fit Clamping range 1.5–13 mm Heavy-duty, impact-proof design Supplied with S 2 A key for reliable tightening Secure spindle fit reduces downtime and runout The B 12 taper and compatibility with DIN 238 ensure a secure, concentric connection to the machine spindle. This reduces radial runout and vibration, which in turn lowers tool wear and rejects. Built as a heavy industrial version for stationary machines, the chuck withstands intermittent high loads while keeping clamped tools true to axis, benefitting production lines and precision workshops that demand repeatable hole positions and surface quality. Versatile, precise clamping for common drill sizes With a clamping range of 1.5–13 mm, the chuck accepts a broad span of twist drills and small tooling, eliminating frequent tool changes for medium to small holework. The S 2 A key supplied with the chuck provides secure torque application for top clamping force and consistent concentricity. The right-hand rotation design matches standard spindle directions on most stationary drilling units, ensuring predictable behaviour during tightening and machining. Industrial durability and easy workshop integration Manufactured for robust use, the chuck is impact-proof and intended as a durable workshop component that reduces maintenance intervals. The geared construction gives a positive grip on tools while allowing controlled tightening with the key, making replacement straightforward when retooling. Thanks to standardised taper and mounting dimensions, the chuck integrates without modification into existing machines, simplifying procurement and fitting in both retrofit projects and new equipment builds. Choose the RÖHM Prima geared drill chuck for dependable clamping in stationary applications and contact Metav Werkzeuge for tailored advice and fast supply from Emmerich – eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and ordering. Technical Data Article number: 4000832033NW Type: Prima Product: geared drill chuck Manufacturer: RÖHM Facts Clamping range: 1.5–13 mm Mount: B 12 taper Key size: S 2 A Rotation: right-hand Special features Drill chuck taper DIN 238 Impact-drill proof Heavy industrial version for stationary machines Supplied with key Art.-Nr. 4000 832 050 FAQ What spindle taper is required for this chuck? The RÖHM Prima geared drill chuck fits a B 12 taper spindle, ensuring a secure connection and reduced runout when mounted correctly. Which drill sizes can be used with the chuck? The chuck clamps tools in the 1.5–13 mm range, covering common small to medium twist drills and comparable tooling. Is the chuck suitable for heavy industrial use? Yes, this is a heavy-duty, impact-proof execution intended for stationary machines and continuous workshop operation. Does the product come with a tightening key? The chuck is supplied with a S 2 A key (referenced in the product details and axite enrichment), enabling reliable tightening and repeatable clamping force. Can the chuck be used with right-hand rotating spindles only? The design and marking indicate suitability for right-hand rotation, matching standard spindle directions on most stationary drills. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5-13mm Pinion Drill Chuck, 1/2”-20 Threaded, Keyed, Through-Hole, Reversible Rotation - RÖHM
Take advantage of a compact, robust clamping solution that combines a wide 1.5–13 mm chuck range with a standard 1/2"-20 mounting for straightforward machine compatibility; the geared keyed design and hammer‑drill resistance ensure dependable grip under reversing loads. Order directly via Metav Werkzeuge or consult the team for specification guidance. RÖHM Prima geared keyed drill chuck — 1.5–13 mm clamping range, 1/2"-20 mount The RÖHM Prima geared keyed drill chuck is a heavy‑duty, keyed chuck designed for workshop and industrial drilling where reliable clamping and reversible rotation are required Clamping range 1.5–13 mm 1/2"-20 mounting thread Through‑drilled and hammer‑drill proof Suitable for right and left rotation Supplied with S2 A key Consistent precision through a broad clamping range The geared keyed chuck delivers stable clamping across a wide 1.5–13 mm span, making it suitable for everything from small‑diameter twist drills to larger drill bits. The toothed gearing gives a secure, mechanical advantage when tightening with the supplied S2 A key, translating operator input into high axial clamping force and reducing the risk of slippage under load. For workshops that process mixed batches, this means fewer tool changes and more predictable hole quality; the chuck’s precision reduces run‑out and contributes to repeatable, measurable results in production environments. Designed for reversible and heavy use Built to cope with modern drill applications, the chuck is through‑drilled for long bits and offers an internal thread compatible with the common 1/2"-20 mounting standard. The construction is hammer‑drill proof, which protects the mechanism against the shock and vibration typical of percussion drilling. Crucially, the unit supports right and left rotation, allowing safe use on machines with reversible spindles and enabling effective removal of stubborn breakouts or screw‑in operations without compromising clamping integrity. These properties make the chuck particularly well suited to maintenance shops, metalworking benches and production cells where flexibility and robustness are priorities. Low maintenance, robust materials and workshop compatibility The geared mechanism and straightforward keyed operation make maintenance simple: occasional lubrication and inspection of the keyway and gear ring keep performance consistent. The durable design resists wear in heavy use, limiting downtime and helping to maintain throughput on the shop floor. Compatibility with standard 1/2"-20 mounts ensures fast retrofitting to existing drills and drivers, while the keyed interface provides positive torque transmission for demanding cutting tasks. Backed by RÖHM’s manufacturing expertise and distributed through Metav’s quality filter, the chuck balances longevity with everyday usability so that tooling budgets deliver sustained value. For expert advice on integrating the RÖHM Prima geared keyed drill chuck into production workflows and for current stock information contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832023NW Type: Prima Product: geared keyed drill chuck Facts Clamping range: 1.5–13 mm Mounting thread: 1/2"-20 Key size: S 2 A Packaging unit: 1 Special features Internal thread Hammer‑drill proof Through‑drilled Supplied with key Suitable for right and left rotation FAQ What drill sizes can this chuck clamp? The RÖHM Prima geared keyed drill chuck clamps tools from 1.5–13 mm, covering a wide range of standard twist drills and general workshop bits. Is the chuck suitable for reversible spindles? Yes, the chuck is specified for right and left rotation, making it compatible with machines that reverse spindle direction. What mounting does the chuck use? The chuck uses a 1/2"-20 mounting thread, a common standard that allows straightforward attachment to compatible drill spindles. Does the chuck allow use of long drill bits or coolant through the spindle? The chuck is through‑drilled, permitting long‑length bits to pass and enabling certain coolant or chip‑clearance setups where applicable. What is included with delivery? Delivery includes the geared keyed chuck in the specified Prima version and the S 2 A key for tightening. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Prime Gear Drill Chuck 1.5–13mm Keyed S2A B16 Shank Right-Hand - RÖHM
Take advantage of a robust, keyed design and a wide 1.5–13 mm clamping range for reliable, repeatable drilling performance in stationary machines; order directly via Metav Werkzeuge or consult our specialists for application sizing. Prima Geared Drill Chuck (B16) — 1.5–13 mm clamping, right-hand rotation — RÖHM The Prima Geared Drill Chuck (B16) is a keyed, heavy‑duty chuck for stationary machines, engineered for right‑hand rotation and precise clamping of drill shanks from 1.5 to 13 mm. Heavy-duty keyed design Clamping range 1.5–13 mm B16 mounting with DIN 238 arbor Right-hand rotation, impact-proof Industrial performance for stationary machining The geared chuck delivers consistent torque transmission and stable tool holding thanks to its ring‑gear mechanism and keyed operation. Fitted with a B16 mounting and supplied with a drill‑chuck arbor conforming to DIN 238, it integrates cleanly with standard stationary spindles. The combination of a keyed drive and the geared housing reduces slippage under load, which leads to fewer reworks and a clearer machining window for operators using medium to heavy drilling cycles. The design is described as impact‑drill‑proof, making it suitable for demanding production environments where intermittent heavy loads occur. Precision clamping that reduces downtime With a clamping range of 1.5–13 mm and a key interface of S 2 A, the chuck secures common drill shank sizes without compromise. The keyed engagement ensures a firm grip on the tool, improving concentricity and lowering run‑out compared with friction chucks; this supports cleaner holes and extended tool life. The specified right‑hand rotation aligns with standard spindle directions for most workshop and industrial drill presses, simplifying tool selection and reducing setup errors. The unit’s availability as a heavy industrial execution makes it a dependable choice for fixed‑station drills and bench machines. Supply reliability and Metav industry support Sourcing through Metav Werkzeuge links the product’s technical strengths with dependable logistics and customer service. Metav’s role as a quality filter for the European market ensures stock management, spare‑part availability and clear specification guidance for workshop buyers and procurement teams. The chuck is delivered with the keyed accessory referenced as Art. no. 4000832050, and documentation on mounting and key size facilitates swift installation. For precision workshops seeking consistent parts and a single supplier for measuring and assembly needs, this approach reduces vendor complexity and supports uninterrupted production. Contact Metav Werkzeuge for tailored application advice or to request this Prima geared drill chuck (SKU 4000832036NW) for stationary machines, quoting the SKU for rapid processing. Technical Data SKU: 4000832036NW Product type: Geared drill chuck Brand: RÖHM Mounting: B16 Clamping range: 1.5–13 mm Key size: S 2 A Rotation direction: Right-hand Facts Clamping range: 1.5–13 mm Mounting standard: B16 Key size: S 2 A SKU: 4000832036NW Special features Drill‑chuck arbor to DIN 238 Impact‑drill‑proof design Supplied with key Art. no. 4000832050 Heavy industrial execution for stationary machines FAQ What clamping range does the Prima geared drill chuck offer? The Prima geared drill chuck provides a 1.5–13 mm clamping range suitable for common drill shank sizes. Is the chuck compatible with standard B16 spindles? Yes, the chuck uses a B16 mounting and includes a drill‑chuck arbor to DIN 238 for direct compatibility with B16 spindles. Which key size is required for tightening? The keyed interface is S 2 A; the supplied key is referenced as Art. no. 4000832050. Can this chuck withstand impact drilling conditions? The unit is specified as impact‑drill‑proof, designed for the intermittent heavy loads typical in stationary drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Tooth-Ring Drill Chuck Prima Keyed 1.0-16mm B18 Reversible Right-Hand - RÖHM
Robust clamping and impact resistance ensure reliable, repeatable drilling in stationary applications; the 1.0–16 mm clamping range together with a B18 taper and keyed S3 operation provide secure tool retention and simple handling. Order the Prima geared drill chuck directly via Metav Werkzeuge or contact our consultants for specification support. Prima Geared Drill Chuck — B18 taper, 1.0–16 mm clamping range (RÖHM) The Prima geared drill chuck is a heavy-duty, keyed chuck for stationary machines, designed for right-hand rotation and fitted to a B18 arbor for secure mounting. Heavy-duty industrial construction Clamping range 1.0–16 mm B18 taper for stable mounting Impact-resistant with S3 key Precision clamping for consistent drilling results The geared chuck offers precise clamping across its 1.0–16 mm range, which keeps centre runout low and maintains repeatability in batch drilling tasks. The geared mechanism multiplies hand torque, enabling consistent tightening without excessive effort; this is particularly useful when operating larger-capacity chucks on bench or floor drills. By choosing a keyed, geared solution, operators benefit from reproducible clamping force that reduces tool slippage and improves hole quality, making the chuck suitable for production and maintenance workshops where reliability matters. Built for heavy-duty, stationary use Constructed as a heavy industrial version for stationary machines, this chuck is impact-resistant and compatible with hammer-action environments while remaining optimised for standard drilling spindles. The inclusion of a DIN 238 taper ensures a stable connection to the machine spindle, reducing runout and vibration under load. Such mechanical robustness lengthens service intervals and reduces unplanned downtime, which is a tangible productivity advantage in workshop and light-industrial settings where machines run for extended periods. Simple, secure keyed operation for safe handling Keyed operation with a S3 key delivers fast, secure tightening and straightforward maintenance. The key-controlled tightening method provides greater clamping torque than a plain hand-tight chuck, ensuring firm engagement with the drill shank and minimising the risk of slippage during arduous tasks. The keyed interface is also easier to inspect and service: worn teeth can be identified and serviced promptly, supporting safe operation and predictable performance in repeated-use environments. Compatibility and mounting explained for clearer integration Fitted to a B18 arbor and designed for right-hand rotation, this geared drill chuck integrates directly with many standard spindles and arbors used in workshop drill presses and pillar drills. The taper conforms to established standards, simplifying changeover and alignment. When specifying mounting adapters or checking spindle compatibility, reference the chuck’s taper and clamping range to ensure correct pairing and optimal concentricity. The SKU 4000832050NW identifies this exact configuration for ordering and inventory purposes. For reliable, high-torque clamping choose the RÖHM Prima geared drill chuck — contact Metav Werkzeuge for supply and tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832050NW Product: Geared drill chuck Model: Prima Facts Clamping range: 1.0–16 mm Arbor: B18 Key size: S 3 Rotation: Right-hand Packaging unit: 1 Special features DIN 238 taper Impact-resistant (suitable for hammer drilling) Heavy industrial version for stationary machines Keyed operation (S3) FAQ Is this chuck suitable for production drill presses? The Prima geared drill chuck from RÖHM is built as a heavy industrial version for stationary machines and is therefore suitable for production drill presses. What clamping range does the chuck cover? The chuck covers a 1.0–16 mm clamping range, which makes it versatile for a wide range of drill shank sizes. Which arbor does the chuck require? This geared chuck mounts to a B18 arbor and includes a DIN 238 taper for stable connection to compatible spindles. How is the chuck tightened and secured? Tightening is performed with the supplied S3 key, providing secure, repeatable clamping suitable for intensive workshop use. What is the SKU for ordering this configuration? The SKU for the RÖHM Prima geared drill chuck in this configuration is 4000832050NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.0-16mm Crown Gear Drill Chuck B16 With Key S3, Right-Hand Rotation - RÖHM
Take advantage of a robust combination of precision and industrial strength with a keyed, hammer‑drill‑resistant chuck and a wide 3.0–16 mm clamping range for reliable performance on stationary machines; order the chuck directly via Metav Werkzeuge or consult our technical team for compatibility and delivery. Prima toothed‑ring drill chuck, 3.0–16 mm, B16, RÖHM The Prima toothed‑ring drill chuck is a heavy‑duty, keyed drill chuck for stationary machines, featuring a B16 taper and designed for right‑hand rotation to ensure secure tool holding in industrial applications Clamping range 3.0–16 mm B16 taper mount Keyed operation, key size S3 Hammer‑drill resistant heavy‑duty design Reliable mounting and compatibility for workshop drill heads The chuck uses a B16 taper, complying with standard mounting interfaces for many bench and pillar drills, which simplifies machine integration and reduces setup time. The DIN 238 taper alignment ensures consistent concentricity and stable runout when fitted correctly. For production environments where repeatable tool change and firm seating are essential, the heavy‑duty specification and keyed interface deliver the mechanical security required for sustained operation. Precise clamping across a broad diameter range With a 3.0–16 mm clamping range, the toothed‑ring chuck covers the most common drill shank sizes used in general metalworking and workshop tasks. The keyed chuck mechanism and S3 key enable high tightening torque, reducing the risk of slippage under load and improving hole quality. This mechanical design is particularly beneficial where drilling accuracy and repeatability affect downstream processes and rework rates, helping to maintain throughput and part conformity. Built for impact‑capable drilling and industrial use The construction is specified as hammer‑drill resistant, making the chuck suitable for operations where intermittent impact loads occur, while remaining optimised for stationary machines with right‑hand rotation. The robust build reduces wear and the need for frequent replacement, which in turn lowers maintenance interruptions. For workshop managers seeking dependable tooling that supports continuous production, this specification minimises unexpected downtime and supports steady output. Practical operation, maintenance and selection guidance The keyed design requires simple, routine maintenance: periodic lubrication of the gear teeth and inspection of the key engagement are sufficient to preserve performance. The toothed‑ring mechanism facilitates secure bit retention with minimal wobble, while the heavy‑duty variant supplied for stationary machines offers enhanced durability compared with lighter, hand‑held chucks. When selecting a chuck for a specific machine, confirm the B16 taper and rotation direction to ensure compatibility with the spindle and drive of the target equipment. For dependable, keyed performance choose the RÖHM Prima toothed‑ring drill chuck and contact Metav Werkzeuge for technical advice and fast delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832038NW Brand: RÖHM Product type: toothed‑ring drill chuck Core facts Clamping range: 3.0–16 mm Mount: B16 taper Key size: S 3 Rotation: right‑hand rotation Packaging unit: 1 Special features DIN 238 taper for drill‑chuck cone Hammer‑drill resistant Supplied with key Heavy industrial version for stationary machines FAQ What clamping range does the chuck offer? The RÖHM Prima toothed‑ring drill chuck offers a 3.0–16 mm clamping range (SKU 4000832038NW), covering common drill shank diameters for workshop and industrial use. Which mount is required to fit this chuck? This chuck is designed for a B16 taper mounting and follows the DIN 238 specification for the drill‑chuck cone; ensure the machine spindle accepts a B16 taper. Is the chuck suitable for impact or hammer‑drilling applications? The RÖHM Prima toothed‑ring drill chuck is specified as hammer‑drill resistant, making it appropriate for operations where impact loads may be present, particularly on stationary machines. What key size is used to tighten the chuck? Tightening is performed with a key of size S 3, which is included with the chuck and provides the torque needed for secure clamping. For which rotation direction is the chuck designed? This heavy‑duty version is configured for right‑hand rotation, intended for use on machines that run in that direction (SKU 4000832038NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4mm S1 Tooth Gear Chuck Key With DIN Gear Tooth - RÖHM
Data conflict detected: the manufacturer field lists "RÖHM" while the product label indicates the brand "TECWERK" for this drill chuck key (S 1). This discrepancy makes it unclear which brand should be officially recognised as the correct manufacturer for this specific product. To ensure accuracy and consistency in the product information, it is essential to confirm whether "RÖHM" or "TECWERK" is the appropriate designation. Without this clarification, generating a full and reliable product description is not possible, as the manufacturer plays a critical role in defining the item's authenticity, quality, and brand identity. Please clarify the correct manufacturer to proceed effectively.
6mm Chuck Key S 2 A With DIN Gear - RÖHM
Take advantage of a compact, gear-type design with DIN-toothed gearing and a precise 6 mm drive pin to ensure secure engagement and reliable chuck adjustments; order directly via Metav Werkzeuge or contact our consultants for guidance. Drill chuck key S 2 A — gear-type, DIN gearing — RÖHM The drill chuck key S 2 A is a gear-type key for tightening and loosening keyed drill chucks, made for workshop and industrial use Robust DIN-toothed gearing for secure engagement S 2 A key size for standard keyed chucks 6 mm drive pin for precise engagement Secure, repeatable engagement for keyed chucks The gear‑type key delivers a stable mechanical connection between the hand tool and the chuck, thanks to the DIN‑toothed gearing that prevents slippage under torque. For production environments and maintenance benches where repeatable clamping is essential, this design reduces the risk of loose drills and minimises downtime. The construction focuses on straightforward function: reliable transfer of hand force to chuck teeth for consistent tightening and loosening cycles. Compact dimensions that suit workshop routines With its S 2 A designation and a 6 mm drive pin, the key fits common keyed chucks found on drills and bench machines. The modest size means the tool is easy to store in tool drawers and quick to retrieve during changeovers. The straightforward geometry facilitates access in confined setups, so adjustments can be made fast without awkward tool handling. The result is a small investment that supports smoother workflow and faster tool changes. Practical durability and low maintenance The gear engagement and simple mechanical design require little upkeep. The key’s interface is designed to withstand regular use while maintaining accurate meshing; cleaning any bruising or debris from the teeth and a light corrosion‑preventative treatment are usually sufficient to prolong service life. Such low maintenance keeps total operating effort down and supports operational efficiency across routine machining or repair tasks. Compatibility and purchasing confidence This gear-type key matches standard keyed chucks and is identifiable by its S 2 A size and DIN gearing, offering clear compatibility cues for procurement and inventory. Supplied as a single unit, it integrates easily into parts bins and tool sets. Purchasing through Metav Werkzeuge ensures access to technical advice and a consistent supply chain that many workshops trust for precision tools and accessories. Order the RÖHM gear‑type drill chuck key S 2 A through Metav Werkzeuge for secure chuck handling — for questions or bespoke advice contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832192NW Label: Drill chuck key S 2 A TECWERK Product type: Gear‑type drill chuck key Manufacturer: RÖHM UID: 2000832192NW Facts Key size: S 2 A Drive pin diameter: 6 mm Packaging unit: 1 Special features DIN‑toothed gearing Gear‑type design for keyed chucks TECWERK designation in label FAQ What chuck types is this key suitable for? The gear‑type drill chuck key S 2 A is intended for keyed drill chucks that accept an S 2 A key size, providing mechanical engagement via DIN‑toothed gearing. How does the DIN gearing benefit workshop use? DIN‑toothed gearing on the key ensures consistent meshing with the chuck teeth, reducing slippage and enabling repeatable tightening and loosening during routine operations. Is the 6 mm drive pin a common standard? Yes, the 6 mm drive pin diameter aligns with common keyed chuck interfaces and allows precise engagement without excess play. Can the key be kept in a bench tool set or parts bin? Supplied as a single unit, the key is compact and suited for bench tool sets or organised parts bins for rapid access during maintenance and production. How can the RÖHM gear‑type key be maintained for long life? Regular cleaning of the teeth, occasional light lubrication where appropriate, and keeping the key free from corrosive exposure will help maintain reliable engagement and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8mm Chuck Key S3 With DIN Gear Teeth - RÖHM
Take advantage of the DIN-toothed engagement and compact S 3 sizing for dependable tightening of keyed chucks; the robust 8 mm pin diameter ensures stable insertion and long service life. For procurement or technical advice, order the drill chuck key directly via Metav Werkzeuge or consult their specialists. Drill chuck key S 3 TECWERK — geared drill-chuck key, DIN-toothed, 8 mm pin Drill chuck key S 3 TECWERK is a geared drill-chuck key designed for precise engagement with DIN-standard toothed chucks, aimed at workshops and industrial settings requiring consistent clamping performance Size S 3, compatible with keyed chucks DIN-toothed drive for precise engagement 8 mm pin diameter for robust insertion Precise engagement for repeatable clamping performance The geared design provides consistent engagement with toothed chucks, translating manual input into reliable clamping force. The combination of a DIN-toothed drive and a compact S 3 profile reduces play during tightening, which supports repeatable results across production batches. This makes the key particularly suitable for light to medium assembly tasks and routine maintenance where accuracy matters. Technical terms: a DIN-toothed drive means the teeth conform to recognised German industrial standards, ensuring compatibility with standard keyed chucks used in many workshops. Robust construction for frequent workshop use A pin diameter of 8 mm delivers a secure fit into the chuck socket, lowering the risk of slippage under torque and extending the useful life of the tool. The straightforward, mechanical design minimises potential failure points, so wear is limited to predictable contact areas. For buyers seeking low-maintenance tooling, this key offers a pragmatic balance between durability and simplicity, reducing downtime and the need for frequent replacement. Efficient tool handling that supports productivity The small footprint and ergonomic geometry of the key allow rapid operation during tool changes and adjustments. Fast, secure engagement shortens task cycles and contributes to smoother workflows on the shop floor. The geared action means less wasted effort for operators, which in turn can improve overall throughput in repetitive operations. Where productivity gains are measured in minutes saved per changeover, such small efficiencies accumulate into tangible time savings. Compatibility and application guidance The geared drill-chuck key is intended for use with keyed drill chucks that accept an S 3 drive and an 8 mm insertion pin; the DIN conformity simplifies integration into existing tool sets. The key is suitable for general workshop applications, maintenance tasks and assembly work where a keyed chuck is present. If the chuck specification is unclear, consult the chuck documentation or seek guidance to confirm compatibility before acquisition. For reliable, DIN-toothed chuck engagement and assured supply from Emmerich, contact Metav Werkzeuge for ordering and specialist advice; eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 2000832193NW SKU: 2000832193NW Label: Bohrfutterschlüssel S 3 TECWERK Manufacturer (raw data): RÖHM Facts Pin diameter: 8 mm Key size: S 3 Packaging unit: 1 UID: 2000832193NW Special features Geared drill-chuck key (gear-ring type) DIN-toothed drive Designed for keyed chucks FAQ Is this key compatible with standard keyed drill chucks? The keyed drill chuck key S 3 TECWERK is designed for compatibility with chucks that accept an S 3 drive and feature DIN-standard teeth; check the chuck's specifications to confirm fit. What does DIN-toothed mean for performance? DIN-toothed indicates the teeth conform to an established standard for engagement geometry, which improves consistency and reduces play during tightening with this drill chuck key. Can the key withstand frequent workshop use? The robust 8 mm insertion pin and geared drive of the chuck key are intended for regular use and provide stable engagement, reducing the likelihood of slippage under normal operational torque. Is the key suitable for heavy industrial torque applications? This key is optimised for light to medium torque tasks typical in workshops and maintenance; for very high torque requirements, assess the chuck and drive system specifications before use. How is the tool supplied and packaged? The item is supplied as a single unit (packaging unit 1) and is identified by article number 2000832193NW for ordering and inventory purposes. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com