160mm Block Jaw Set Unstepped Unhardened 3-Piece, For Chuck Ă160mm - RĂHM
Benefit from precise and reliable clamping with a three-piece, unstepped design that fits a 160 mm chuck and delivers consistent contact for repeatable machining. Order the set directly via Metav Werkzeuge or consult our specialists for compatibility advice. Block jaw set for 160 mm chuck (3-piece) â RĂHM A block jaw set engineered for secure external clamping on chucks with a 160 mm diameter, designed as an unstepped, unground three-piece set for stable seating and straightforward exchange. Set of 3 unstepped block jaws For 160 mm chuck diameter Precision fit by RĂHM Secure clamping for repeatable results The three-piece set provides an even distribution of clamping forces across the workpiece, reducing the risk of distortion during turning operations. Its unstepped design allows full jaw contact on cylindrical or slightly contoured surfaces, which improves concentricity and reduces the need for frequent rework. This specification supports efficient work cycles in medium-duty lathe applications, enabling processors to maintain machining tolerances without additional adjustments. Fast changeover and clear compatibility Supplied as a compact set, the jaws are matched for use with a 160 mm chuck, simplifying inventory and setup. The uniform geometry across the three elements ensures a consistent seating interface and reduces set-up time when swapping between workpieces. Delivered by a recognised toolmaker, the components are intended for fast replacement and reliable repeatability, which streamlines workflow in production or maintenance environments. Trusted sourcing and supply continuity Sourcing through Metav Werkzeuge provides easy access to compatible clamping components, backed by a broad product range and a commitment to reliability. Metavâs stock-holding and fulfilment approach aims to shorten lead times and secure ongoing supply to workshops and industrial buyers. For complex setups or confirmation of fit, the product documentation and Metavâs advisory service are available to clarify dimensions and intended use. Contact Metav Werkzeuge for ordering and application support and ensure the RĂHM block jaw set is the correct choice for the chuck and clamping tasks at hand. Technical Data Article number: 4121270160NW Label: Blockbackensatz f.Futter-D.160mm ungestuft ungeh.3St./VE RĂHM Manufacturer: RĂHM Facts Pack contents: 3 pieces Suitable for chuck Ă 160 mm Packaging unit: 1 Special features Unstepped, unground design Brand: RĂHM UID: 4121270160NW FAQ What chuck size is this jaw set compatible with? The RĂHM block jaw set is designed for use with a 160 mm chuck and provides full contact on the clamped surface. How many jaws are included in the pack? The delivery contains a three-piece set; the RĂHM set comprises three matching block jaws. Are the jaws stepped or unstepped? These block jaws are supplied unstepped and unground, allowing complete surface contact where appropriate. Can this set improve concentricity compared with stepped jaws? Yes, the unstepped geometry of the RĂHM block jaw set can increase contact area and help achieve better concentricity for suitable workpiece profiles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm External Stepped Hardened Jaws Chuck Jaw Set, For 160mm Chuck - RĂHM
Take advantage of the combination of precise clamping, hardened durability and quick replacement to maintain consistent production quality; order the jaw set directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Jaw set for chuck Ă 160 mm â externally stepped, hardened jaws | RĂHM Jaw set for chuck Ă 160 mm designed for secure external clamping in workshop chucks and light-turning applications Externally stepped jaws for secure clamping Hardened steel for prolonged wear resistance Designed for 160 mm chuck mounting Greater uptime through hardened clamping components The set features hardened outer jaws engineered for increased wear resistance, which translates into fewer replacements and more running hours between maintenance intervals. This robustness supports steady production workflows and reduces the risk of dimensional drift when machining batches, helping to preserve component tolerances. Where repeatability matters, the combination of surface hardening and consistent jaw geometry contributes to reliable positioning and extended service life. Versatile external gripping with stepped jaw geometry The externally stepped profile allows a range of external diameters to be gripped securely by a single jaw set, reducing changeover time between different workpieces. The stepped design improves contact distribution and clamping stability, which is particularly beneficial when holding non-uniform or stepped components. For workshops that require flexible throughput without frequent tooling swaps, this approach minimises downtime and simplifies inventory management. Complete three-piece set for immediate replacement Supplied as a three-piece set, the package provides the full complement of outer jaws needed for immediate fitting to a compatible chuck. The configuration matches standard 160 mm chuck layouts and permits straightforward refurbishment of a worn jaw assembly without the need to replace the entire chuck. By keeping matched jaws, concentricity and repeatability are maintained, supporting consistent part quality across production runs. Choose the RĂHM hardened outer jaws for dependable workshop clamping and contact Metav Werkzeuge for availability or tailored advice â eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121268160NW Product type: Jaw set Brand: RĂHM Suitable for chuck diameter: 160 mm Pack unit: 1 Core specifications Chuck diameter: 160 mm Pieces per set: 3 SKU: 4121268160NW Materials & features Externally stepped outer jaws Hardened for wear resistance Compatible with 160 mm chucks Three-piece replacement jaw set FAQ Are these jaws compatible with any 160 mm chuck? These jaws are intended for chucks with a 160 mm mounting diameter; the jaw set for chuck Ă 160 mm (RĂHM, SKU 4121268160NW) is designed to match standard outer-jaw mounting arrangements, but mounting geometry should be confirmed against the chuck model before order. What does "hardened" mean for service life? Hardened indicates a heat-treated surface that increases wear resistance; the RĂHM jaw set's hardened finish extends operational life and reduces frequency of replacements in regular workshop use. Can the stepped profile grip varying diameters without custom machining? Yes, the externally stepped geometry permits secure gripping of multiple external diameters within the jaw's stepped range, reducing the need for custom jaw modifications for many common part geometries. Is the set delivered complete for immediate installation? The three-piece set supplies the complete outer jaw complement for a 160 mm chuck configuration, enabling immediate replacement of worn jaws without procuring additional matching parts. How should concentricity be checked after fitting the jaws? After fitting the jaw set for chuck Ă 160 mm, run an indicator check at the recommended radii; the matched three-piece arrangement from RĂHM helps maintain concentricity when installed and torqued evenly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Jaw Set For 160mm Chuck, 3 Pieces - RĂHM
Take advantage of the combination of robust clamping performance and long service life provided by hardened jaws compatible with a 160 mm chuck; order directly via Metav Werkzeuge or ask their consultants for clarification on suitability. RĂHM Basic Jaw Set for 160 mm chuck â hardened, 3-piece A RĂHM Basic Jaw Set engineered for reliable clamping in turning and workshop applications, suitable for use with chucks having a 160 mm diameter. Hardened construction for long service life Compatible with 160 mm chuck diameters Three-piece set for even clamping pressure Consistent clamping for repeatable machining results The RĂHM Basic Jaw Set delivers precision clamping for turning operations on chucks with a 160 mm diameter. Hardened contact surfaces maintain concentricity during repeated cycles, which improves repeatability between setups and reduces the need for rework. The design supports stable tool engagement and predictable part geometry, translating technical performance into measurable time savings on the shop floor. Reduced downtime through durable design With a focus on wear resistance, the hardened jaws withstand abrasive and cyclic loads more effectively than untreated components. That longevity reduces the frequency of replacements and maintenance interventions, improving overall equipment availability. The robust construction is particularly beneficial in small-batch production or repair workshops where uptime directly affects delivery reliability and operational cost-efficiency. Straightforward integration into existing chuck systems The three-piece configuration provides balanced radial pressure for secure part holding across the clamping surface. This geometry helps to avoid slippage and minimises distortion of workpieces when machining softer or irregular stock. The set is intended for standard 160 mm chucks and allows efficient replacement of worn jaws, supporting quick retooling and consistent clamping behaviour in everyday workshop tasks. Trusted choice for professional equipment fleets Engineered by a recognised brand, this jaw set combines hardened surfaces and a pragmatic three-piece layout to meet routine industrial demands. For workshops consolidating suppliers, the set offers a dependable component that aligns with broader aims of repeatable quality and stable production flow. Advice on matching jaw profiles and specific chuck models can refine performance for specialised turning tasks. For durable, precision clamping choose the RĂHM jaw set and contact Metav Werkzeuge for tailored advice and ordering â Metav Werkzeuge offers dependable supply from Emmerich and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4121273160NW Manufacturer: RĂHM Product type: Chuck jaw set For chuck Ă 160 mm Contents: 3 pieces Packaging unit: 1 Facts Diameter compatible: 160 mm Pieces per set: 3 Packaging unit: 1 Special features Hardened jaws Three-piece configuration Designed for 160 mm chucks FAQ What chuck diameter is this jaw set designed for? The jaw set is designed specifically for use with chucks of 160 mm diameter and delivers stable clamping for that size range. Are the jaws hardened for durability? Yes, the jaws feature a hardened surface to provide enhanced wear resistance and extended service life. How many jaws are included in the set? The set contains three pieces, configured to provide even clamping pressure across the workpiece. Is this product suitable for precision turning work? The design and hardened surfaces make this jaw set suitable for precision turning where concentricity and repeatability are important. What is the article number for ordering or reference? The article number for this jaw set is 4121273160NW Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Jaw Set for 160mm Chuck, Stepped Hardened Jaws 3 Pieces - RĂHM
Take advantage of the combination of secure clamping, hardened stepped jaws and a practical three-piece configuration for reliable turning operations and efficient changeover. Order the chuck jaw set directly via Metav Werkzeuge or consult the team for application advice. RĂHM Chuck Jaw Set â Hardened, Stepped Jaws for 160 mm Chucks RĂHM Chuck Jaw Set for lathe chucks, designed to provide precise and repeatable clamping in workshop and industrial turning applications Hardened stepped jaws for secure grip Compatible with 160 mm chucks Three-piece set for full jaw coverage RĂHM manufacturing quality Precision clamping for consistent machining results A well-matched jaw set is essential for repeatable turning work. The hardened stepped jaws in this set deliver consistent contact geometry, which reduces run-out and contributes to uniform part dimensions across batches. The stepped profile allows the jaws to seat progressively, improving grip on a range of workpiece diameters while maintaining secure clamping. For operations where concentricity and dimensional stability matter, this configuration supports reliable cycle-to-cycle performance and reduces time spent on rework. Robust construction for long service life Durability is central to uninterrupted production. These jaws are supplied in a three-piece set that is heat-treated for wear resistance, offering a longer service interval compared with unhardened alternatives. The hardened surfaces show improved resistance to abrasion and deformation during clamping, which helps retain the original jaw geometry and cutting accuracy. Using hardened, stepped components reduces the need for frequent replacement, translating into lower downtime and predictable maintenance planning. Compatibility and practical handling in the workshop Supplied for use with a 160 mm chuck, the jaw geometry is compatible with common chuck designs used in small to medium lathes and machining centres. The set arrangement simplifies inventory and changeover: the three matching jaws provide full coverage without mixing sizes, enabling faster installation and reduced risk of error. Clear labelling and standard fitment make the set a practical option for job shops and production lines that prioritise quick tooling swaps and steady throughput. The result is an efficient workflow supported by components that are straightforward to fit and maintain. For dependable RĂHM clamping performance and further technical clarification, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical data SKU: 4121269160NW Article: Drehbackensatz Brand: RĂHM Facts Suitable for chuck Ă: 160 mm Set content: 3 pieces Packaging unit: 1 Material & special features Stepped jaws, hardened Designed for lathe chuck clamping Three matching jaws for full jaw coverage FAQ What chuck size is this jaw set designed for? This jaw set is designed for a 160 mm chuck and provides stepped, hardened jaws suitable for that diameter. How many jaws are included in the set? The set contains three jaws, supplied as a matched three-piece configuration for full jaw coverage. Are the jaws hardened for durability? Yes, the jaws are hardened and feature a stepped profile to improve wear resistance and clamping consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Block Jaw Set Unstepped Unhardened 3 Pieces - RĂHM
Take advantage of a robust clamping solution that combines compatibility with 200 mm chucks, a customisable unstepped jaw design and a three-piece configuration for complete jaw coverage; order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Block jaw set â RĂHM, for 200 mm chuck, unstepped design The Block jaw set is designed for external clamping on lathes and machining centres with a 200 mm chuck diameter, providing a flexible basis for custom jaw machining and secure part holding. Fits chuck Ă 200 mm Unstepped block jaw design Three-piece set for full chuck coverage Reliable clamping for consistent production quality The set offers a straightforward solution for external clamping needs on chucks with a 200 mm diameter. The unstepped jaw profile is supplied in a soft, unmachined state so that the clamping surfaces can be tailored precisely to the workpiece. This approach improves repeatability and reduces set-up iterations because the jaws can be machined to match exact part contours, ensuring contact over the intended gripping surface rather than relying on generic contours. Clear compatibility reduces uncertainty at the selection stage and supports efficient batch processing. Flexible machining for bespoke component support Delivered as a three-piece pack, the components enable full coverage of standard three-jaw chucks and simplify balancing and alignment during installation. The unstepped design permits bespoke machining on a lathe or milling fixture so that a single jaw set can serve multiple part families when re-profiled. The resulting adaptability translates into lower tooling inventory and faster changeovers, which benefits job shops and in-house production lines seeking versatile clamping options without compromising on process control. Practical handling and installation benefits Each jaw is shaped for secure seating in the chuck and for straightforward machining; the simple geometry reduces machining time and makes it easier to verify datum references once the custom profile is created. Because the set is specified for a 200 mm chuck, selection is immediate for compatible chucks and adapters; this clarity prevents mismatched ordering and minimises downtime. The compact pack also supports orderly storage and traceability in the tooling cabinet, streamlining workshop logistics. Material neutrality and application scope The product description does not specify base material or heat treatment, so the set is presented as a universal, machinable option suitable wherever custom jaw contours are required. The design is especially useful when parts demand precise contact zones or when off-the-shelf hardened jaws would not provide the required geometry. For users seeking ready-to-run hardened solutions, alternative jaw types remain available, while this set prioritises versatility and economical customisation. For tailored jaw fitting and availability for RĂHM block jaws, contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com for specific advice and delivery options. Technical data Article number: 4121270200NW Label: Block jaw set for chuck Ă 200 mm, unstepped, 3 pieces per set Brand: RĂHM Facts Chuck diameter: 200 mm Pieces per set: 3 Packaging unit: 1 Special features Unstepped design for custom machining External clamping application Supplied as a three-piece set for three-jaw chucks FAQ What chuck size is this jaw set compatible with? The RĂHM block jaw set is specified for use with chucks of 200 mm diameter and fits standard three-jaw configurations. Can the unstepped jaws be machined to a custom profile? Yes, the unstepped condition allows machining of bespoke gripping profiles so that the jaws can be finished to match the part geometry. Is the base material or hardness specified for the jaws? The available data for this RĂHM block jaw set does not state material or hardness; the parts are provided in an unstepped form intended for subsequent machining. How does a three-piece set benefit a workshop? A three-piece configuration covers the complete circumference of a three-jaw chuck, aiding balance, simplifying alignment and enabling consistent repeatability across mounted workpieces. What is the article number for ordering or reference? The article number for this RĂHM block jaw set is 4121270200NW, which should be quoted for precise ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Chuck Jaw Set Stepped External Hardened, For 200 mm Chuck - RĂHM
Benefit from hardened, outward-stepped jaws designed for secure external gripping and the clear compatibility with a 200 mm chuck to keep clamping reliable and repeatable; order the replacement directly via Metav Werkzeuge or consult our specialists for tailored advice. RĂHM Jaw Set for 200 mm Chuck â Outward Stepped, Hardened RĂHM Jaw Set for 200 mm Chuck supplies hardened, outward-stepped jaws intended for precise external gripping applications on lathe chucks and similar clamping fixtures. Hardened stepped outer jaws Fits 200 mm chucks Repeatable clamping accuracy Secure external gripping with stepped, hardened jaws The design of the stepped outer jaws allows secure clamping across a broader diameter range while maintaining clamping accuracy. The stepped profile increases contact options for external workpieces, so fewer intermediate accessories are needed. Because the jaws are hardened, wear resistance is improved under repeated use, which preserves concentricity and reduces the need for frequent regrinding. For workshops and production lines that require dependable external clamping, the combination of stepped geometry and surface hardening supports longer service life and stable machining results. Reduce downtime with straightforward replacement and consistent runout A complete jaw set enables rapid restoration of chuck performance after wear or damage, helping to maintain throughput. The geometry and manufacturing tolerances of the jaws contribute to consistent radial runout, which in turn reduces scrap rates and minimises inspection cycles. Where runout matters for precision turning, the hardened surfaces sustain gripping force without premature deformation, supporting reproducible setups. Clear identification of the set and compatibility with a 200 mm chuck streamline inventory management and spare-part logistics in a busy workshop environment. Engineered quality from a recognised clamping specialist Produced to meet workshop demands, the set combines robust materials and heat treatment to deliver durability and dependable gripping behaviour. The brandâs focus on clamping technology ensures attention to concentricity and repeatability, which benefits both one-off jobs and series production. For procurement and technical planning, Metav Werkzeuge acts as a precision partner offering stock availability, transparent order handling and advice from specialists familiar with industrial clamping solutions. The result is a practical balance between operational reliability and maintenance predictability. Order genuine RĂHM replacement jaws through Metav Werkzeuge for assured clamping performance; for specification queries or delivery options contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121268200NW SKU / UID: 4121268200NW Product type: Jaw set (Bohrbackensatz) Manufacturer: RĂHM Suitable for chuck Ă: 200 mm Packaging unit: 1 Numbers / Core technical data Chuck diameter compatibility: 200 mm Packaging unit: 1 Article number: 4121268200NW Special features Hardened stepped outer jaws Designed for external gripping applications Full replacement jaw set for chuck Ă 200 mm Manufacturer: RĂHM FAQ What chuck size is this jaw set compatible with? The jaw set is specified for use with a 200 mm chuck and is designed to provide secure external clamping at that diameter. Are the jaws heat treated for wear resistance? Yes, the outward-stepped jaws are hardened to improve wear resistance and to help maintain clamping concentricity over prolonged use. Can this set be used for internal gripping tasks? The geometry is intended for external gripping; for internal applications, alternative jaw types are recommended. How does the jaw design affect runout and repeatability? The stepped profile and precision machining contribute to consistent clamping accuracy, reducing radial runout and improving repeatability between set-ups. Which article number should be ordered for this item? Order using article number 4121268200NW to ensure the correct RĂHM jaw set is supplied Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Jaw Set For Chuck, 3-Piece Set - RĂHM
Take advantage of the combination of hardened construction, straightforward replacement and compatibility with standard 200 mm chucks for reliable clamping and reduced downtime â order this jaw set directly via Metav Werkzeuge or consult the technical team for fitment details. RĂHM base jaw set for 200 mm chuck â hardened, 3-piece The RĂHM base jaw set for 200 mm chuck is a hardened set of replacement jaws designed for secure workholding on standard 200 mm chucks in machining and turning applications. Hardened construction for extended service life Compatible with 200 mm chucks Set of three jaws for complete assembly Consistent, precision clamping for series production The hardened jaw geometry and contact faces are engineered to deliver consistent clamping force, helping to maintain concentricity during turning and machining cycles. This stability reduces rework and supports repeatable tolerances in batch production. As a result, cycle-to-cycle variation is minimised, which enhances process reliability and aids quality assurance in metalworking and general workshop environments. Fast replacement to keep machines productive Supplied as a set of three, the jaws are intended for direct replacement of worn components, enabling swift maintenance without time-consuming adjustments. The complete set format simplifies stocking and spares planning, which in turn limits machine downtime and streamlines ordering. Clear identification of the item and fitment for 200 mm chucks makes procurement and inventory control more efficient for production planners. Durable service life and broad workshop suitability The hardened treatment increases wear resistance and extends service intervals, making these jaws a cost-effective choice for everyday workshop use. The combination of robust material treatment and precise manufacturing supports secure gripping of workpieces during roughing and finishing operations, contributing to safer, more predictable machining. The brand reputation further underpins a dependable supply chain for precision partners. For secure procurement and to confirm compatibility with specific chuck models, contact Metav Werkzeuge â specialists in precision workshop supplies â for tailored advice and order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4121273200NW SKU / UID: 4121273200NW Manufacturer: RĂHM Product type: Base jaw set Core specifications Chuck diameter: 200 mm Set contents: 3 pieces Packaging unit: 1 Features & compatibility Hardened design Suitable for 200 mm chucks Replacement jaws for standard lathe chucks FAQ What chuck size is this jaw set made for? This base jaw set is specified for use with a 200 mm chuck and is marked as suitable for that chuck diameter. How many jaws are included in the set? The delivery comprises three jaws; the complete set of three ensures a full jaw assembly for the chuck. Are the jaws heat-treated or surface-hardened? The RĂHM base jaw set is supplied in a hardened condition to improve wear resistance and durability under machining loads. Is this set a direct replacement for standard RĂHM chucks? The jaw set is designed for compatibility with 200 mm chucks; confirmation of direct fitment to a specific chuck model can be obtained from Metav Werkzeuge. Can these jaws be used for heavy-duty turning and finishing operations? The hardened construction supports both roughing and finishing operations by providing sustained clamping performance and reduced wear Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Jaw Set for Chuck, Stepped Hardened Jaws, 3 Pieces - RĂHM
Take advantage of a hardened, stepped jaw design and precise compatibility with a 200 mm chuck to secure workpieces reliably; the three-piece set reduces changeover time and simplifies setup. Order the jaw set directly via Metav Werkzeuge or request advice from our consultants if additional information is required. RĂHM jaw set for 200 mm chuck â hardened stepped jaws, 3-piece set The RĂHM jaw set for 200 mm chuck delivers hardened, stepped jaws intended for secure clamping in turning and chucking applications on compatible 200 mm chucks. Hardened stepped jaws for repeatable clamping Designed for 200 mm chuck diameter Includes three interchangeable jaws per set Precision-ground seating for secure fit Optimised clamping for efficient turning operations The stepped jaw geometry offers a compact solution for multiple gripping diameters, reducing the need for frequent jaw changes. Constructed for secure clamping on a 200 mm chuck, the set forms a stable contact that improves cycle consistency and lowers the risk of slippage. By combining a hardened surface with precision seating, the assembly supports longer service intervals while maintaining positional accuracy in repetitive turning tasks. Consistent repeatability and straightforward handling A three-piece configuration provides modular replacement and simple indexing during setup, which helps to shorten machine downtime. The 3-piece set allows each jaw to be mounted and aligned individually, guaranteeing consistent clamping forces and precision across repeated workpieces. For users unfamiliar with stepped jaws: the design includes discrete gripping steps so a single set can handle several nominal diameters without additional accessories. Practical integration into workshop workflows Compatibility with a 200 mm chuck makes this jaw set suitable for a range of lathes and clamping fixtures that accept standard chuck inserts. The robust construction and stepped profile support both roughing and finishing operations where hold and repeat accuracy matter. As a compact, replaceable component, the set contributes to predictable set-up procedures and helps maintain throughput when used alongside regular maintenance practices. For precision clamping with the RĂHM hardened stepped jaws, contact Metav Werkzeuge for a tailored quotation or technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 4121269200NW SKU: 4121269200NW Brand: RĂHM Facts Chuck diameter: 200 mm Set contents: 3 pieces Packaging unit: 1 Special features Hardened stepped jaws Suitable for 200 mm chuck Clamping application for turning Precision-ground seating FAQ Are these jaws compatible with any 200 mm chuck? Compatibility depends on the chuck's jaw seat and mounting standard; the jaw set is designed for chucks that accept standard 200 mm jaw inserts and mounting geometry, as indicated by the product data for the RĂHM jaw set (SKU 4121269200NW) What does "stepped jaws" mean in practice? Stepped jaws provide discrete gripping steps so that a single jaw can clamp several nominal diameters; the RĂHM stepped jaws enable versatile clamping without frequent jaw swaps How many pieces are supplied in one set? The delivery comprises a three-piece set; each set contains three interchangeable jaws for staged installation Are the jaws hardened for heavy-duty work? Yes, the jaws are specified as hardened, offering improved wear resistance and sustained clamping performance in typical turning operations Can the jaws be reworked or ground to fit? Modifying hardened jaws is possible but requires appropriate tooling and expertise; any rework should preserve the seating and clamping surfaces to maintain the set's precision Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Chuck Jaw Set, Stepped Hardened Jaws, 3 Pieces - RĂHM
Take advantage of the combination of a hardened, stepped jaw design, compatibility with 250 mm chucks and the convenience of a complete three-piece set to reduce setup time and improve clamping reliability on turning centres. Order the jaw set directly via Metav Werkzeuge or consult the team for selection and compatibility advice. RĂHM jaw set for 250 mm chuck â hardened, stepped jaws, 3-piece The RĂHM jaw set for 250 mm chuck offers hardened, stepped jaws designed for reliable clamping in turning and general workshop applications. Hardened, stepped jaw design For chuck Ă 250 mm compatibility Includes 3-piece set Optimised fit for 250 mm chucks reduces setup time This jaw set is engineered for direct use with chucks of Ă 250 mm, providing a clear and verifiable compatibility specification that simplifies procurement and planning. The three-piece set supplies a complete jaw complement for standard three-jaw chucks, which minimises downtime during changeover. By choosing a set that matches the chuck diameter, rework on adapters or time-consuming modifications is avoided, creating a more efficient production flow. Durable, precise clamping for consistent machining results The hardened surface and stepped jaws design deliver enhanced wear resistance and a secure contact profile across multiple diameters, which helps to maintain concentricity and repeatability during turning operations. Hardened jaws resist deformation under clamping loads, so runout remains stable and part tolerances are easier to hold. For shops seeking predictable results on medium-sized workpieces, this combination supports reliable part quality and reduced scrap rates. Practical handling and integration into workshop processes The set is supplied as a compact, ready-to-install package containing three dedicated jaws, so fitting and replacement are straightforward and quick. Clear identification of chuck compatibility (Ă 250 mm) aids stock management and prevents wrong-part usage on the shop floor. When paired with routine inspection and sensible maintenance, the component life is extended and service intervals become more predictable, supporting continuous production with minimal interruptions. Contact Metav Werkzeuge for tailored advice on the RĂHM jaw set for 250 mm chucks and to confirm fitment for specific machines â email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121269250NW Manufacturer: RĂHM Product type: Jaw set Facts Chuck compatibility: Ă 250 mm Packaging unit: 1 Set contents: 3 pieces Special features Hardened, stepped jaws Designed for three-jaw chucks Original label retained for identification FAQ Are these jaws suitable for standard three-jaw chucks? The RĂHM jaw set is designed as a complete three-piece set for use with three-jaw chucks specified at Ă 250 mm, matching the common mounting and geometry for that chuck size. What does âstepped jawsâ mean in practice? Stepped jaws provide a series of discrete contact levels so a range of diameters can be clamped securely without intermediate adapters; the RĂHM stepped profile allows progressive clamping positions while retaining stable contact. Are the jaws heat-treated or surface-hardened? Yes, the product description specifies hardened jaws, which improves wear resistance and reduces deformation under clamping loads, supporting consistent concentricity during machining. How many pieces are supplied and what is the article number? The set contains three pieces; the article number is 4121269250NW and the set is labelled for chuck Ă 250 mm compatibility. Can these jaws be used for both external and internal clamping? The stepped form is typically advantageous for external gripping across multiple diameters; final suitability for internal clamping should be verified against the chuck and jaw geometry in the specific application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Jaw Set For 250mm Chuck Undrilled 3 Pieces - RĂHM
Taking advantage of a robust, three-piece block jaw solution and precise compatibility with a 250 mm chuck, this set supports efficient jaw replacement and flexible gripping arrangements. Combine secure clamping, straightforward fitting and genuine RĂHM quality â order the RĂHM block jaw set directly via Metav Werkzeuge or ask our consultants if needed RĂHM Block Jaw Set for 250 mm Chuck, Unstepped, Unhardened The RĂHM Block Jaw Set is an unstepped, unhardened jaw set designed for secure workholding and easy jaw replacement on 250 mm chucks Compatible with 250 mm chucks Unstepped design for customised gripping Three-piece set for complete jaw replacement Precise workholding for 250 mm chucks The three-piece block jaw set provides a practical, machine-shop-ready option where compatibility with a 250 mm chuck is required. Supplied as a complete three-piece set, the jaws allow fast replacement of worn elements and facilitate a repeatable clamping setup. The unstepped, unhardened design permits straightforward finishing or modification on the bench or in a toolroom, so workshop teams can adapt the gripping surface to the workpiece without being limited by pre-ground contours. This results in efficient preparation of bespoke clamping solutions and reduced downtime during tooling changes. Flexible machining and straightforward adaptation Because the jaws arrive unhardened, they can be finished or hardened to suit specific production demands, enabling adaptation for different cycles or materials. The unstepped geometry is especially useful where customised contact faces are required, as it allows for direct machining of the jaw profile to match bespoke fixturing. This flexibility supports varied turning and milling applications where standard stepped jaws would otherwise restrict clamping options, delivering a pragmatic balance between adaptability and workshop efficiency. Practical sourcing and workshop integration Sourcing genuine clamping parts matters for operational reliability. The set is produced under the RĂHM name and supplied as a standard replacement set that integrates with typical 250 mm chucks. The compact pack simplifies inventory management while allowing rapid replenishment of worn jaws. For users seeking dependable spare parts, the assembly-friendly format and clear specification reduce procurement friction and help maintain consistent machine availability across shifts and projects. For genuine RĂHM clamping reliability and to confirm suitability for existing chucks, contact Metav Werkzeuge for availability and expert advice on the block jaw set Technical data Article number: 4121270250NW Brand: RĂHM Product type: Block jaw set Facts Suitable for chuck diameter: 250 mm Pack contents: 3 pieces Packaging unit: 1 Special features Unstepped design Unhardened version as delivered Designed for straightforward jaw replacement FAQ Are these jaws compatible with any 250 mm chuck? Compatibility is intended for chucks with a 250 mm diameter; actual fit depends on the chuck model and the jaw mounting form, so checking the interface is recommended for full compatibility with the RĂHM block jaw set. What is included in the delivery? The delivery comprises a three-piece block jaw set as specified by the article number 4121270250NW, supplied in a single packaging unit. Can the jaws be machined or hardened after delivery? Yes, the jaws are supplied unhardened and are suitable for post-delivery machining or heat treatment where a hardened service condition is required. Is this set suitable for custom gripping profiles? The unstepped geometry is intended for customised gripping, enabling direct machining of the contact faces to produce tailored clamping profiles without pre-existing steps or contours Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Jaw Set Three Pieces For Lathe Chuck, Hardened - RĂHM
Take advantage of robust, hardened clamping surfaces and precise seating for consistent machining cycles; this combination reduces rework and keeps setup times low. Order the set directly via Metav Werkzeuge or contact the technical team for compatibility checks. RĂHM Base jaw set â hardened, for 250 mm chuck A RĂHM base jaw set engineered for secure workholding on a 250 mm chuck, supplied as a three-piece set for straightforward installation in standard chucks. Hardened jaws for long service life For 250 mm chuck diameter Set of three for immediate replacement Consistent clamping for repeatable machining The hardened jaw faces deliver stable contact and resist wear across repeated cycles, ensuring repeatability in series production. Designed for conventional three-jaw chucks with a 250 mm diameter, the set provides uniform bite and reduces runout, which translates into fewer scrap parts and lower inspection overhead. By relying on proven surface treatment and geometry, machining tolerances remain stable over time, improving throughput in both jobbing and production environments. Faster changeover and reduced downtime A three-piece configuration allows straightforward removal and replacement during maintenance intervals, shortening machine downtime. The modular nature of the jaws supports quick alignment and mounting, so workshop personnel can restore full clamping capability without lengthy adjustments. This practical design contributes to improved machine utilisation and helps maintain a predictable production rhythm, supporting lean workflows and efficient shift planning. Broad compatibility with standard chucks and simple verification Prepared for use with a 250 mm chuck, the set fits common clamping systems and is suitable as a service spare or for upgrading worn components. Clear, measurable dimensions and hardened contact surfaces make it easy to verify seating and concentricity during installation. For applications where chuck performance is critical, these jaws offer a direct way to restore precision and minimise the need for regrinding or trial-and-error setups. Contact Metav Werkzeuge for a compatibility check or to arrange supply of the matching jaw set; technical advice and delivery options are available from Metav Werkzeuge's team in Emmerich Technical data Article number: 4121273250NW Label: Grundbackensatz f. Futter-D.250mm geh.3St./VE RĂHM Product type: Base jaw set Facts Suitable for chuck diameter: 250 mm Set content: 3 pieces Packaging unit: 1 Special features Hardened jaw faces Designed for standard 250 mm three-jaw chucks Immediate replacement set FAQ What chuck size is this jaw set intended for? The jaw set is intended for use with a 250 mm chuck and provides hardened contact surfaces for reliable clamping. How many jaws are included in the set? The delivery contains a set of three jaws, supplied as a single packaging unit for direct replacement. Are the jaws hardened for wear resistance? Yes, the jaws feature hardened faces to extend service life and maintain seating accuracy during repetitive machining. Can these jaws restore reduced chuck concentricity? Fitting the new hardened jaws can help restore concentric seating and reduce runout when correctly mounted in a compatible 250 mm chuck. Is this product available through Metav Werkzeuge? The jaw set with article number 4121273250NW can be supplied via Metav Werkzeuge; contact their technical team for fit confirmation and delivery details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Stepped Hardened Chuck Jaws OutwardâMounting, Set of 3 - RĂHM
Take advantage of the combination of secure external clamping, hardened wear resistance and compatibility with a 250 mm chuck for dependable operation in turning applications; order the jaw set directly via Metav Werkzeuge or consult our specialists for suitability and availability. RĂHM jaw set for 250 mm chuck â outward stepped, hardened A RĂHM jaw set designed for external clamping on a 250 mm lathe chuck, featuring outward stepped, hardened jaws in a three-piece configuration for consistent gripping of larger workpieces For chuck Ă 250 mm Outward stepped jaws, hardened 3 pieces per pack Reliable external gripping that stabilises machining The outward-stepped design of these jaws provides a clear mechanical advantage when clamping on to external diameters: the stepped profile increases contact area while keeping the workpiece concentric in the chuck. Combined with the hardened finish, this configuration reduces wear and maintains repeatable seating over many cycles. For workshops focused on high uptimes, the direct result is fewer reâset operations and improved process stability when turning and facing larger components. Built for longevity to reduce maintenance intervals A hardened surface treatment enhances wear resistance, so the jaw faces retain their geometry for longer under normal lathe use. The set is supplied as a three-piece set, allowing full replacement of a jaw row rather than piecemeal repairs, which simplifies stock management and speeds return to production. This durability translates into a lower total cost of ownership for repetitive, highâuse clamping tasks where consistent repeatability is required. Straightforward integration into standard chucks and workflows Specified for use with a 250 mm chuck, the jaw geometry fits existing mounting interfaces for quick installation and interchange. The set is intended for external clamping duties on conventional chucks and is particularly suitable where stepped jaw profiles give better seating on stepped or uneven diameters. For additional technical clarification or to confirm compatibility with a specific chuck model, Metavâs advisers can provide measured guidance and supply options that match workshop requirements. For tailored clamping solutions, stock information or application advice on the RĂHM jaw set for 250 mm chucks, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical data SKU: 4121268250NW Item: Jaw set Brand: RĂHM Description: For chuck Ă 250 mm; outward stepped jaws; hardened; 3 pieces per pack Packaging unit: 1 Measurements / Core data Compatible chuck diameter: 250 mm Pack contents: 3 pieces per pack Packaging unit: 1 Special features Outward stepped jaws Hardened Intended for external clamping on 250 mm chucks FAQ What does "outward stepped jaws" mean for clamping? Outward stepped jaws have a staged profile that increases external contact on the workpiece; the RĂHM jaw set uses this shape to improve gripping stability on external diameters. Is this jaw set suitable for a standard 250 mm lathe chuck? Yes, the set is specified for chuck Ă 250 mm and is designed to fit conventional mounting seats for that chuck size. How many pieces are included with one pack? Each pack contains three pieces, providing a complete row of jaws for installation on the chuck. Are the jaws heat treated or surface hardened? The jaw set is described as hardened, which improves wear resistance and helps preserve clamping geometry during repetitive use. Can the jaws be replaced individually if damaged? The supply format is a threeâpiece set; replacing the full set restores uniform contact geometry and is the recommended approach for consistent clamping behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com