HSK100 Taper Cleaning Wiper Plastic Body With Leather Edge, For Hollow Shank HSK100 - TECWERK
Take advantage of a dedicated taper cleaner that combines precise removal of dust and chips with compatibility for HSK100 hollow shank tapers; the plastic body with leather trim protects the taper surface while enabling fast, routine maintenance. Order the taper wiper directly via Metav Werkzeuge or contact our consultants for application advice. Taper Wiper HSK100 Ku. — taper cleaner for HSK100, plastic body with leather trim (TECWERK) Taper Wiper HSK100 Ku. A compact taper cleaner designed to clear dust, chips and contamination from HSK100 hollow shank tapers in production and workshop environments. Compatible with HSK100 hollow shank tapers Plastic body with leather trim Removes dust, chips and dirt Ideal for routine maintenance Preserve seating accuracy and prevent tool runout Regular cleaning of the machine taper is a simple preventive measure with measurable benefits. The Taper Wiper HSK100 Ku. is engineered to remove dust, chips and other contamination that can prevent correct seating of tooling, which in turn affects concentricity and spindle accuracy. By keeping the taper contact surfaces clean, the risk of poor clamping, increased runout and premature tool wear is reduced, supporting consistent machining quality and fewer unexpected stoppages. Gentle yet effective construction for workshop use Constructed with a plastic body and a leather trim, the tool combines lightness with a surface-friendly cleaning edge. The leather strip conforms to the taper profile to lift away debris without scratching hardened faces, while the synthetic body resists corrosion and heavy soiling. This combination ensures a practical balance between durability and a soft contact surface, making the cleaner suitable for repeated use during shift changeovers or scheduled maintenance intervals. Fast maintenance routine that reduces downtime Integration into maintenance procedures is straightforward: manual wiping of the taper takes only moments but yields measurable operational gains. A short, regular cleaning routine helps maintain consistent tool seating and reduces the need for corrective adjustments, contributing to overall shop-floor efficiency. The compact design supports storage in tool cabinets or at the machine station, enabling immediate use during tool changes and contributing to reduced machine downtime and smoother production flow. Contact Metav Werkzeuge for tailored advice and reliable supply of TECWERK taper wipers for HSK100 to integrate this simple, effective maintenance tool into the workshop routine. Technical data Article number: 4000832894NW Product label: Konuswischer HSK100 Ku. Brand: TECWERK Facts Packaging unit: 1 Special features Application: cleaning machine tapers of dust, chips and dirt Material: plastic body with leather trim Suitable for: HSK100 hollow shank taper FAQ Is this taper wiper compatible with other HSK sizes? The taper wiper is specified for HSK100 hollow shank tapers; the TECWERK taper wiper is designed to match the diameter and profile of HSK100 applications. How does the leather trim affect the taper surface? The leather trim on the taper wiper gently removes contamination without scratching hardened contact faces, preserving seating accuracy for HSK100 tapers. Can the tool be used on wet or oily surfaces? The taper wiper is intended primarily for removing dry debris such as dust and chips; for heavily soiled or oily tapers, mechanical cleaning or suitable degreasing is recommended before final wiping. How often should the taper be cleaned with this tool? Frequency depends on the production environment; regular wiping during tool changes or at shift handover is advisable to maintain consistent clamping and reduce the risk of tool runout when using the TECWERK taper wiper. Does the product come as a single unit? The taper wiper is supplied as a single unit, packaged with a packaging unit quantity of 1 (Article number 4000832894NW). Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
HSK63 Cone Wiper Plastic Body With Leather Pad For HSK63 Taper - TECWERK
Take advantage of a compact cleaning solution that combines efficient debris removal, a plastic body with leather wiping edge and a design made specifically for HSK63 tapers; this keeps clamping faces clean and reduces the risk of tool misalignment. Purchase or request advice via Metav Werkzeuge for fast supply and technical guidance. TECWERK Taper Wiper HSK63 (Plastic) — for HSK63 hollow shank tapers The Taper Wiper HSK63 (Plastic) is a purpose-built taper cleaner for removing dust, chips and residue from HSK63 machine tapers during routine maintenance and tool change procedures. Cleans HSK63 tapers of dust and chips Plastic body with leather wiping edge Fast, maintenance-friendly taper cleaning Single-item packaging for immediate use Maintain precise clamping by removing contaminants quickly A reliable taper cleaner preserves machining accuracy by eliminating the small debris that causes poor contact between spindle and tool. The HSK63 taper surface is particularly sensitive to dust and metal shavings; regular use of a dedicated cleaner prevents micro‑gaps that lead to runout or loss of clamping force. This cleaner is designed as a simple maintenance aid, enabling rapid removal of particles so that clamping interfaces stay true and setups remain repeatable with minimal downtime. Soft leather edge and resilient plastic body for gentle cleaning Constructed with a plastic body and a leather wiping edge, the device combines gentle surface contact with effective debris capture. The leather trim conforms to the taper profile to lift dust and chips without scratching the contact face, while the plastic housing provides dimensional stability and easy handling. This combination supports safe cleaning of precision surfaces: the wiping material removes contaminant layers while the rigid body ensures consistent contact geometry during each cleaning pass. Practical for workshop routines and preventive maintenance Integration into daily tool change procedures is straightforward: the cleaner is intended for HSK63 hollow shank tapers and comes as a single unit, ready to use from the workbench. By making taper cleaning a standard step in the changeover routine, the likelihood of setup errors and unexpected tool failures is reduced. The device supports a pragmatic maintenance philosophy—small, regular actions that protect expensive tooling and preserve machine accuracy over the long term. For complex enquiries about fitment or compatibility with a specific spindle, Metav Werkzeuge can provide further technical clarification. For tailored advice or supply of TECWERK taper wipers for HSK63 spindles, contact Metav Werkzeuge—info@metav-werkzeuge.com or call +49 2822 7131930—to ensure the right taper maintenance solution for the workshop. Technical data Article number: 4000832892NW Label: Konuswischer HSK63 Ku. Product type: Taper wiper Manufacturer: TECWERK Material: Plastic Suitable for: Hohlschaftkegel HSK63 Packaging unit: 1 UID: 4000832892NW Core data Packaging unit: 1 Design & special features Cleaning of machine tapers from dust, chips and dirt Body made from plastic with leather edge Intended for HSK63 hollow shank taper FAQ Is this taper wiper compatible with HSK63 spindles? Yes. The Taper Wiper HSK63 is designed specifically for HSK63 hollow shank tapers and is intended to remove dust, chips and dirt from the contact surfaces. What materials form the cleaning surface and body? The device has a plastic body with a leather wiping edge, which provides gentle contact and effective debris removal on precision taper faces. How often should the taper be cleaned with this tool? Frequency depends on machining conditions; however, the cleaner is intended for regular use during tool changes to maintain clean clamping faces and consistent tool seating. Will the leather edge scratch the spindle or tooling? No. The leather wiping edge is chosen for its combination of conformity and softness, enabling the removal of contaminants without abrasive wear to precision surfaces. Is the tool supplied ready for immediate use? Yes. The item is supplied as a single unit (packaging unit 1) and is ready to be integrated into routine maintenance procedures. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
MK1 Taper Cleaner Wooden Body With Leather Pad, For Cleaning Machine Tapers - TECWERK
Reliable maintenance for Morse tapers: the wooden-body taper wiper removes dust, chips and grime while protecting the taper face with a leather trim; ideal for routine spindle cleaning — order directly via Metav Werkzeuge or consult our team for application advice. Taper Wiper MK1 (wooden body) by TECWERK — leather-trimmed, for Morse taper MK1 The Taper Wiper MK1 (wooden body) is a purpose-made tool for cleaning machine Morse tapers, removing dust, swarf and contaminants from the taper seat to preserve machining accuracy. Wooden body with leather trim For Morse taper MK1 applications Removes dust, chips and residues effectively Simple, workshop-friendly maintenance Keeps Morse tapers accurate and ready for use The wooden taper wiper is designed to deliver precision cleaning for machine tapers, ensuring consistent contact between tool and spindle. By removing dust and chips from the taper seat, the tool reduces the risk of runout and misalignment that can compromise part quality. The function is straightforward and reliable: the leather contact surface lifts debris without abrading the taper, so the spindle seating is preserved and machine performance remains consistent. Durable, gentle construction suited to daily workshop use Built with a solid wooden body and a leather facing, the device combines robustness with a surface that is gentle on metal. The choice of materials provides a balance between long service life and careful handling of precision components. The leather pad conforms slightly to the taper profile, improving contact and ensuring effective debris removal without scratching. Maintenance is minimal and the tool can be returned to service immediately after a quick clean, supporting efficient workshop routines. Integrates into maintenance schedules and reduces downtime As a compact, easy-to-store maintenance aid, the MK1 taper wiper fits into established lubrication and cleaning cycles and supports faster tool changes at the bench. Regular use of this taper cleaner helps prevent build-up that would otherwise necessitate longer spindle service intervals, contributing to better equipment uptime and predictable production flow. If clarification on suitability is required, Metav Werkzeuge’s advisors can provide technical guidance to integrate the tool into existing maintenance processes. For reliable cleaning of Morse tapers, choose the TECWERK taper wiper with wooden body — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832881NW Product: Taper wiper (wooden body) Material: Wooden body with leather trim Brand: TECWERK Suitable for: Morse taper MK1 Packaging unit: 1 UID: 4000832881NW Numbers / Core technical data Packaging unit: 1 Special features / Versions Designed for cleaning machine tapers of dust, swarf and grime Wooden body with leather pad Workshop maintenance tool for Morse taper MK1 FAQ How does the taper wiper protect the taper face? The taper wiper MK1 by TECWERK uses a leather-trimmed contact surface that lifts debris without scratching, so the taper seating remains intact and accurate. Is this tool compatible with other taper sizes? This specific model is made for Morse taper MK1; for other taper sizes, a corresponding taper cleaner should be selected to ensure proper fit and cleaning performance. How often should the taper be cleaned with this tool? Regular inspection is advised; light cleaning with the MK1 taper wiper after tool changes or shift intervals helps prevent build-up and supports machining precision. Can the wooden body be maintained easily? Yes, the wooden body and leather pad require minimal care: remove accumulated debris and allow the pad to dry if contaminated with coolant or oil. What is the SKU for reordering? Reorder using SKU 4000832881NW for the TECWERK taper wiper MK1. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
MK2 Taper Wiper Wooden Body With Leather Face, For Cleaning Machine Tapers - TECWERK
The combination of a wooden body and leather-faced pad ensures gentle but thorough removal of dust, chips and grime from taper seats, improving seating accuracy and reducing setup rework. Order the taper wiper directly via Metav Werkzeuge or consult our advisors if further technical details are required. Morse taper MK2 wiper (wooden body) – leather-faced taper cleaner by TECWERK The Morse taper MK2 wiper (wooden body) is a purpose-built taper cleaner for removing dust, chips and dirt from machine tapers to ensure reliable tool seating and repeatable accuracy. Wooden body, leather-faced pad Suitable for Morse taper MK2 Removes dust, chips and grime Workshop-compatible, single-piece design Improve taper seating and machining accuracy Routine cleaning of a taper seat prevents debris from causing misalignment and runout. The Morse taper MK2 interface is sensitive to small contaminants: even fine chips or swarf can raise the tool and alter concentricity. The leather-faced pad combined with a solid wooden body cleans without marring hardened surfaces, maintaining the precision of the mating faces. Regular use reduces measurement variation and shortens set-up times, supporting a more consistent production flow. Durable, workbench-friendly construction for repeated use A simple, robust construction with a wooden handle delivers a reliable feel and controlled pressure when removing contaminants. The leather facing conforms to slight surface irregularities, ensuring contact across the taper while avoiding abrasive action on steel. This arrangement provides a balance of gentleness and cleaning efficiency appropriate for everyday workshop use, making the tool a practical addition to maintenance kits and tool-change routines. Quick procedure that protects spindle and tooling Cleaning the taper before mounting tooling prevents trapped debris from transferring into the spindle or collet, which can otherwise cause fretting or wear over time. The cleaner is dimensioned for Morse taper MK2 seats and is straightforward to use: wipe the taper with the leather face until chips and dust are removed, then inspect the seating surface. Using the taper cleaner as a standard pre-assembly step minimises rejects and helps protect precision components across repeated cycles. Contact Metav Werkzeuge for TECWERK taper wipers and ensure consistently clean Morse taper MK2 seating—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832882NW Manufacturer: TECWERK Item type: taper wiper Material: wooden body Suitable for: Morse taper MK2 Packaging unit: 1 Facts Article number/UID: 4000832882NW Packaging unit: 1 Special features Wooden body with leather-faced pad For cleaning machine tapers from dust, chips and grime Designed to fit Morse taper MK2 FAQ What is the primary purpose of this taper cleaner? The taper cleaner is designed to remove dust, chips and grime from Morse taper seating to preserve accurate contact and reduce runout when mounting tooling. Is the tool suitable for tapers other than MK2? This cleaner is specified for Morse taper MK2; compatibility with other taper sizes is not guaranteed and should be checked against taper dimensions. How should the taper cleaner be used to avoid surface damage? Use the leather-faced side to wipe tapers gently until all debris is removed; the wooden body provides controlled pressure while the leather prevents scratching of the seating surfaces. Does the cleaner help to extend spindle and tooling life? Regular removal of contaminants with this TECWERK taper wiper reduces abrasive contact and fretting at the mating surfaces, contributing to longer tool and spindle life. How often should the taper seating be cleaned in production environments? Frequency depends on machining conditions, but integrating the cleaner into every tool change or set-up procedure is recommended to maintain consistent seating and part quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
MK3 Taper Cleaning Wiper Wooden Body With Leather Pad - TECWERK
Take advantage of the combination of reliable cleaning performance and gentle, low-impact contact to keep machine tapers free of dust and swarf; the wooden body with leather trim ensures effective debris removal while protecting precision tapers — order directly via Metav Werkzeuge or consult our technical advisors for compatibility and application advice Taper Wiper MT3 (Wooden Body) – Taper cleaner for Morse taper MT3 with leather-trimmed head (TECWERK) The Taper Wiper MT3 (Wooden Body) is a hand tool designed to clean Morse taper machine spindles and toolholders of dust, swarf and machining debris in workshop and maintenance routines Wooden body with leather trim Designed for Morse taper MT3 Removes dust, swarf and machining debris Gentle on precision tapers to avoid damage Preserve taper accuracy with regular, targeted cleaning Maintaining the running accuracy of a machine taper is most effective when contamination is removed promptly; the Morse taper MT3 interface is particularly sensitive to dust and metal swarf, which can lead to misalignment and premature wear if left unattended. The taper wiper provides a straightforward means of contamination control, so that runout and seating integrity are retained. Regular cleaning with a dedicated tool minimises the need for corrective rework and supports consistent production quality, helping to keep machine downtimes to a minimum. Gentle materials that protect precision surfaces The combination of a wooden body and a leather trim is selected to remove particles without scratching hardened steel tapers. The leather-trimmed head contacts the taper over a broad area, displacing dust and chips while cushioning the surface; wood offers a stable backing that is dimensionally stable and easy to handle. This construction is intentionally low-abrasive, so delicate seating faces are preserved and component life is extended, which is especially important for high-precision toolholders and collet systems. Simple to integrate into workshop maintenance routines The tool is made for fast manual use during scheduled checks or between tool changes; contamination is removed quickly and without additional consumables, which supports efficient workshop workflows. Because the design is focused on the practical task of cleaning tapers, it can be included in standard maintenance kits or at machine-side stations. For specific cleaning procedures or compatibility questions related to specialised spindles, technical advice is available to ensure the tool is used in the most effective way for each application. For tailored advice, technical clarification or to order the TECWERK taper wiper directly, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s experts will advise on integration into existing maintenance regimes and workshop workflows Technical data Article number: 4000832883NW Product type: Taper wiper Brand: TECWERK Core data Suitable for: Morse taper MT3 Material: Wooden body Packaging unit: 1 Special features Leather-trimmed head Cleans dust, swarf and dirt from machine tapers FAQ Is this tool compatible with other Morse taper sizes? The taper wiper is specified for Morse taper MT3; for other taper sizes, Metav Werkzeuge can advise on alternative cleaners or suitable sizes. How does the leather trim help during cleaning? The leather-trimmed head on the Taper Wiper MT3 (Wooden Body) provides a soft, effective contact surface that dislodges dust and small swarf particles without scratching the taper face. Can the cleaner be used on hardened or plated tapers? The tool is designed to be low-abrasive; it is suitable for typical hardened steel tapers and plated surfaces where gentle debris removal is required, as used in precision toolholding. How often should machine tapers be cleaned with this tool? Cleaning frequency depends on machining activity and material feed; regular inspection and use of the taper wiper after heavy machining or before tool changes is recommended to preserve seating accuracy. Does the product require special maintenance? The wooden body with leather trim should be kept dry and free from oil build-up; periodic inspection of the leather is advised and replacement is recommended if the contact surface becomes hard or contaminated Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
MK4 Morse Taper Cone Wiper Wooden Body With Leather Facing - TECWERK
Take advantage of a robust cleaning solution that combines a wooden body and a leather pad to remove dust, chips and grime from machine tapers while preserving spindle seating; practical, low-maintenance care for Morse tapers keeps production running smoothly and reduces rework. Order via Metav Werkzeuge or consult the team for fitment advice. Morse Taper Cone Wiper MK4 — Wooden Body with Leather Pad (TECWERK) Morse Taper Cone Wiper MK4 for gentle, effective cleaning of machine tapers in workshops and maintenance bays Wooden body with leather cleaning pad Cleans machine tapers from dust and chips Designed for Morse taper MK4 Simple, quick cleaning between tool changes Maintain spindle accuracy with gentle, effective cleaning The cone wiper uses a wooden body combined with a leather pad to remove adhering dust, chips and oil residue from the internal surface of machine tapers. By keeping machine tapers free from contaminants, the tool helps to maintain correct seating and spindle accuracy, reducing the likelihood of runout-related issues. The construction is deliberately simple yet effective, providing a practical maintenance routine that supports consistent machining performance. Fast cleaning that reduces downtime and speeds workflows Designed for quick, repeatable use, this cone wiper enables quick cleaning during tool changes or routine inspections. The compact format and straightforward handling mean cleaning cycles can be integrated into standard setup procedures without special tools or long interruptions. For production environments where changeover speed matters, the unit’s efficiency contributes directly to lower process interruptions and fewer corrective operations. Compatible design for common taper standards in workshops Compatibility with Morse taper MK4 ensures the wiper fits the intended taper profile and reaches the critical contact surfaces. The combination of materials is chosen to be gentle on precision seats while still removing particulate matter that can compromise clamping and concentricity. Where accurate taper seating is required for repeatable results, a correctly matched cleaning tool supports consistent toolholding and safer operations. Durable, sustainable choice for everyday maintenance The timber construction offers a tactile yet sturdy feel, while the leather pad provides a surface that conforms lightly to the taper geometry and resists premature abrasion. This makes the solution both durable for routine use and considerate of tactile surfaces. As a small, low-complexity consumable, it presents an economical maintenance option that avoids unnecessary waste and supports long-term workshop reliability. Contact Metav Werkzeuge to confirm compatibility for Morse taper MK4 and arrange reliable supply from Emmerich Technical data Article number: 4000832884NW Product type: Cone wiper Brand: TECWERK Material: Wooden body with leather pad Suitable for: Morse taper MK4 Packaging unit: 1 Facts Packaging unit: 1 Special features For cleaning machine tapers of dust, chips and dirt Wooden body construction Leather pad cleaning surface Workshop maintenance and tool change application FAQ How does the cone wiper remove chips without damaging the taper? The cone wiper uses a wooden body with a leather pad that conforms gently to taper surfaces; this combination dislodges dust and chips while minimising abrasion to the contact faces. Is this wiper suitable for any Morse taper size? This model is designed specifically for Morse taper MK4; the geometry and pad contact are matched to that taper standard for reliable cleaning. How often should the taper be cleaned with the cone wiper? Cleaning intervals depend on application, but regular use of the cone wiper after heavy machining or before tool changes helps maintain seating integrity and reduces the need for adjustment. Can the leather pad be replaced when worn? The design focuses on straightforward maintenance; if the leather shows significant wear, replacement or renewal of the pad ensures continued cleaning performance and protection of the taper. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
MK5 Morse Taper Cone Wiper Wooden Body With Leather Skirt - TECWERK
A fast and dependable solution for keeping spindle tapers clean: the wooden-bodied taper cleaner with leather trim removes dust, chips and light debris from Morse taper MK5 interfaces, reducing set-up errors and protecting contact surfaces; order directly via Metav Werkzeuge or consult our technical advisors for compatibility and supply. Taper cleaner MK5 wooden body (TECWERK) — wooden body, leather trim for Morse taper MK5 Taper cleaner MK5 wooden body — a compact tool for clearing dust, chips and dirt from machine tapers, designed specifically for use with Morse taper MK5 spindles and sockets Wooden body with leather trim Suitable for Morse taper MK5 Cleans dust, chips and debris Reduce spindle downtime with precise taper cleaning Contaminated tapers are a common cause of poor seating and misalignment; the taper cleaner MK5 wooden body provides a straightforward, mechanical means to keep contact surfaces free from contamination. Regular use of this cleaning implement supports consistent seating of toolholders and prevents small particles from causing runout or surface marring, which in turn reduces rework and machine downtime. The result is a more reliable production flow and fewer interruptions during setup. Gentle, durable construction protects precision surfaces The combination of a wooden body with a leather trim offers an effective balance of firmness and surface protection: the wooden core provides the necessary shape and handling stability, while the leather edge removes debris without scratching hardened tapers. This gentle action preserves the finish on spindle tapers, so maintenance intervals can remain standard and the contact faces retain their accuracy. The design is especially suitable where surface integrity and repeatable seating are essential. Seamless integration into workshop routines Designed for simple, repeatable use, the taper cleaner fits directly into the Morse taper MK5 interface and can be used as part of daily toolroom housekeeping. The compact format allows technicians to clear tapers quickly between tool changes, supporting faster tool swaps and fewer inspection steps. Low-maintenance by nature, the cleaner requires only occasional replacement of the leather trim if worn, keeping lifecycle effort minimal while supporting operational efficiency. Compatibility and practical applications Intended primarily for cleaning machine tapers, this tool is a practical accessory for maintenance benches, tool rooms and production cells that use Morse taper MK5 interfaces. The robust wooden construction withstands routine handling, while the leather trim deals effectively with swarf and fine dust. For workshops prioritising repeatability and spindle protection, the cleaner contributes to longer-term toolholder accuracy and reduces the risk of contamination-related faults. Contact Metav Werkzeuge for availability and technical advice on the TECWERK taper cleaner MK5 wooden body — fast supply from Emmerich and specialist guidance for workshop integration. Technical data Article number: 4000832885NW Product type: Taper cleaner Label: Konuswischer MK5 Holzkörper Facts Packaging unit: 1 SKU: 4000832885NW Suitable for: Morse taper MK5 Special features Material: wooden body Leather trim for gentle cleaning Function: cleans machine tapers of dust, chips and dirt Brand: TECWERK Product type (original): Konuswischer FAQ How is the cleaner used with Morse tapers? The taper cleaner MK5 wooden body is inserted into the Morse taper MK5 socket and rotated gently to remove dust and swarf; the wooden core provides shape stability while the leather trim captures debris. Will the wooden construction scratch hardened tapers? No — the wooden body combined with the leather trim is designed to clean without abrading hardened surfaces, helping to maintain seating accuracy on Morse taper MK5 interfaces. Can the cleaner be used on other taper sizes? The tool is specified for Morse taper MK5; for different taper sizes, a corresponding cleaner sized to the relevant taper should be selected to ensure proper contact and effective cleaning. How often should the leather trim be replaced? Replacement depends on usage intensity; when the leather shows visible wear or no longer captures debris effectively, renewal will restore optimal cleaning performance. Is the tool suitable for use in production environments? Yes — the robust construction and gentle cleaning action make it suitable for routine use in tool rooms and production cells where maintaining clean tapers supports process reliability. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
SK40 Taper Cleaning Wiper Wooden Body With Leather Facing - TECWERK
Efficient maintenance with a wooden-body SK40 taper wiper that removes dust and chips while protecting the spindle taper; the leather-trimmed face ensures gentle cleaning and minimal wear. Combine simple handling and dependable construction for predictable production routines. Order the SK40 taper wiper directly via Metav Werkzeuge or consult our advisors for technical guidance. SK40 taper wiper (wooden body) by TECWERK — leather-trimmed cleaner The SK40 taper wiper (wooden body) is a compact maintenance tool designed to remove dust, chips and light contamination from steep machine tapers, ensuring consistent tool seating and spindle performance across production shifts. Wooden body with leather trim for gentle cleaning Designed for SK40 steep tapers Removes dust, chips and light contamination Simple handling for fast maintenance Maintain spindle accuracy with quick, protective cleaning Regular removal of contaminants from the machine taper prevents seating errors and excessive runout, supporting consistent toolholder alignment and repeatable machining results. The SK40 taper wiper features a wooden body with a leather-trimmed cleaning face that picks up abrasive dust and loose swarf without scratching the contact surfaces. This combination of materials offers a balance between effective debris removal and surface protection, reducing the need for time-consuming corrective adjustments and helping to keep changeover times predictable. Faster maintenance rounds through ergonomic, low-effort handling Thanks to its compact, one-piece design, this taper wiper enables quick cleaning routines at the bench or on the machine, shortening maintenance cycles and increasing productive time. An ergonomic profile and familiar handling reduce manoeuvring, while the low-maintenance wooden construction requires no special care — simply clean or replace the leather trimming as required. The straightforward function and durable build help workshops maintain throughput without introducing complex procedures. Workshop-suitable build for everyday use and reliable results The wooden body construction provides resilient handling characteristics in busy workshop environments, while the leather trim adapts to the taper geometry for consistent surface contact. Suitable specifically for SK40 steep tapers, the tool is intended for routine cleaning of dust, chips and light contamination to support reliable tool seating. Its simple, purpose-driven design aligns with standard workshop workflows, making it an unobtrusive but effective addition to maintenance kits and inspection benches. Secure dependable taper maintenance: request the TECWERK SK40 taper wiper from Metav Werkzeuge for expert advice and fast supply – info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 4000832887NW Product: SK40 taper wiper, wooden body Manufacturer: TECWERK Facts Packaging unit: 1 Special features Material: wooden body with leather trim Suitable for: steep taper SK40 Application: cleaning machine tapers of dust, chips and light contamination FAQ How does the taper wiper protect the spindle taper? The leather-trimmed face of the SK40 taper wiper removes abrasive dust and swarf while the wooden backing provides a gentle support surface, helping to avoid scratches and preserving accurate seating of the toolholder. Is this tool suitable for all SK40 holders? The taper wiper is designed for steep tapers of the SK40 family and is intended for routine cleaning of machine tapers of that specification. How should the leather trim be maintained? Leather trim can be wiped clean of loose debris; replacement or renewal can be performed when the cleaning performance declines to maintain consistent results with the SK40 taper wiper. Can the tool remove heavy buildup or hardened deposits? The taper wiper is intended for dust, chips and light contamination; hardened deposits or heavy residues require suitable mechanical or chemical cleaning methods rather than this wooden leather-trimmed cleaner. Which SKU identifies this taper wiper? The product is listed under SKU 4000832887NW and supplied as a single unit per packaging. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
SK50 Taper Cleaning Wiper Wooden Body With Leather Facing - TECWERK
Take advantage of gentle but effective maintenance with a wooden-body taper wiper featuring a leather edge that clears dust, chips and grime from steep SK50 tapers; the robust wooden construction and leather trim ensure secure cleaning without damaging contact surfaces. Order the Taper Wiper SK50 (wooden body) directly via Metav Werkzeuge or ask our consultants if needed. Taper Wiper SK50 (wooden body) – wooden body with leather trim | TECWERK Taper Wiper SK50 (wooden body) is a compact cleaning tool for removing dust, chips and grime from steep SK50 machine tapers, designed for routine workshop maintenance. Wooden body with leather edge Designed for steep SK50 tapers Removes dust, chips and grime Simple to use and durable Keeps tapers clean for reliable seating and repeatability Regular cleaning of the machine taper is a straightforward way to protect clamping accuracy and to maintain consistent seating. The Taper Wiper SK50 (wooden body) removes loose particles and residue that would otherwise prevent full contact between mating surfaces; by reducing contamination, the tool helps preserve repeatability across setups and minimises the risk of runout or misalignment. For production environments where tool changeover time matters, a quick taper wipe is a measurable step towards consistent cycle times and fewer rejects. Protects spindle faces and prevents damage during clamping A soft leather trim combined with a stable wooden body provides effective debris pick-up while being gentle on precision surfaces. The leather edge follows the taper profile to lift away swarf without scratching or abrading the seat; the wooden core gives reliable shape and handling during use. This construction supports high accuracy during clamping operations because it removes the microscopic obstructions that cause uneven seating, contributing to longer component life and fewer corrective adjustments during setup. Streamlines workshop routines with quick, low-effort maintenance As a simple maintenance implement, the taper wiper integrates into daily or shift-based checks without special tools or fixtures. Its ergonomic form and robust build mean quick access and repeated use without performance loss, which is particularly valuable in busy shops where time and reliability are essential. Incorporating the wiper into standard operating procedures reduces downtime and supports a more organised maintenance culture, improving overall workshop throughput and operational confidence. Material choice explained for dependable, low-impact cleaning The combination of a wooden body and leather trim balances firmness and gentleness: the wooden core retains shape for accurate profile contact, while leather traps particles and prevents marring. This makes the tool suitable for removing chips, dust and general grime from steep tapers such as SK50, without introducing abrasive contact. The design is focused on maintenance rather than abrasive cleaning; for heavy contamination or adhesive residues, specialised cleaning agents or methods may be required to avoid damage. Contact Metav Werkzeuge for procurement and expert advice on the TECWERK Taper Wiper SK50 (wooden body): info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832888NW Product: Taper wiper Manufacturer: TECWERK Material: Wooden body with leather trim Suitable for: steep taper SK50 Packaging unit: 1 UID: 4000832888NW Facts Packaging unit: 1 Special features Body material: wood Trim material: leather Application: cleaning machine tapers from dust, chips and grime For use with steep taper SK50 Product type: taper wiper FAQ How often should steep tapers be cleaned? Routine cleaning frequency depends on machining conditions, but regular checks after heavy machining or at each tool change help maintain seating; the TECWERK Taper Wiper SK50 (wooden body) is designed for quick, repeatable cleaning of SK50 tapers. Will the leather trim scratch the taper surface? No, the leather trim on the taper wiper is chosen to trap debris without abrading contact faces; the wooden body ensures stable handling during the cleaning process. Can this tool remove embedded coolant or sticky residues? The taper wiper removes dust, chips and general grime effectively; for hardened residues or coolant films, additional cleaning agents or degreasing may be necessary prior to using the wooden wiper. Is the wiper suitable for other taper sizes besides SK50? The product is designed specifically for steep taper SK50 profiles; for other taper standards, verify profile compatibility or select a tool matched to the respective taper. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com