13mm Ball Washer DIN 6319C For M12 Screws, Bore 13mm - AMF
Take advantage of the combination of DIN 6319C conformity, a precise Ø13 mm bore and compact height for consistent seating and reliable assemblies; order directly via Metav Werkzeuge or consult our technical team for specification support. Spherical washer DIN 6319C for M12 — AMF, bore Ø13 mm The Spherical washer DIN 6319C is a precision seating washer designed to compensate angular misalignment and ensure uniform load transfer beneath M12 fastenings in mechanical and structural assemblies DIN 6319C standardised seating washer For M12 fastenings with Ø13 mm bore Compact height H2 4.6 mm for tight spaces Spherical seating radius R 17 for self-alignment Secure seating and consistent load transfer The spherical washer manufactured to DIN 6319C provides a reliable bearing surface that compensates for angular errors between bolt head and component face. By matching the seating geometry to the mating surface, the washer improves load distribution across the joint and reduces peak stresses that can cause loosening or uneven clamping. For assemblies using M12 bolts, the specified Ø13 mm bore ensures correct running clearance while the spherical form promotes repeatable torque behaviour and safer mechanical connections. Engineered dimensions for predictable assembly performance Key measures such as D1 Ø13 mm, D3 24 mm, H2 4.6 mm and R 17 mm define the seating profile and overall fit. The bore diameter (D1) is selected to suit standard M12 shank tolerances; the outer diameter (D3) and spherical radius (R) determine contact area and tilting capacity. These dimensions translate directly into practical benefits: precise centring, consistent clamping force and reduced need for rework. Technical teams unfamiliar with seating washers will find that adherence to standard dimensions simplifies parts sourcing and ensures interchangeability across suppliers. Practical workshop advantages and supply reliability Delivered in single-unit packaging for controlled assembly usage, this seating disc supports quality-conscious production and maintenance workflows. The design reduces rework time and supports predictable assembly tolerances, which is particularly valuable for repeat production runs or retrofit work. For procurement and stocking, Metav Werkzeuge’s distribution from Emmerich acts as a quality filter for the European market, helping maintain steady supply and technical guidance for fitment and selection. For technical clarification or to source AMF spherical washers with DIN 6319C conformity via Metav Werkzeuge, contact our specialists in Emmerich for immediate assistance and order placement Technical data SKU: 4000833458NW Label: Kugelscheibe DIN 6319C for screws M12, bore Ø13 mm Manufacturer: AMF Product type: Spherical washer Suitable for: M12 Packaging unit: 1 UID: 4000833458NW Dimensions / Key measures D1: 13 mm (bore Ø) D3: 24 mm (outer Ø) H2: 4.6 mm (height) R: 17 mm (spherical radius) Standard: DIN 6319C Features / Applications Standardised seating element for angular compensation Designed for steel assemblies and machine construction Single-piece seating washer for consistent clamping Compact form factor for limited installation space FAQ Is this washer suitable for M12 bolts? The spherical washer is specified for use with M12 fastenings; the Ø13 mm bore provides the correct clearance for standard M12 shanks. Which standard does the seating washer comply with? The washer conforms to DIN 6319C, ensuring interchangeability and standardised seating geometry. What are the key dimensions that affect fit and function? Critical measures are D1 Ø13 mm, D3 24 mm, H2 4.6 mm and R 17 mm, which together define bore fitment, contact area and angular compensation. Can the washer compensate for uneven contact surfaces? Yes, the spherical seating radius allows the washer to correct minor misalignments between the bolt head and the mating surface, improving load distribution. How is the product supplied and identified? This item is supplied in a packaging unit of 1 and is listed under SKU 4000833458NW for ordering and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Ball Washer DIN 6319C For M16 Screws, Bore 17mm - AMF
Take advantage of the combination of DIN 6319C conformity, precise Ø 17 mm bore and compact seating geometry to secure reliable joint alignment and even load distribution. Order the item directly via Metav Werkzeuge or consult our advisors for specification support. Spherical washer DIN 6319C for M16 — Bore Ø 17 mm (AMF) Spherical washer DIN 6319C engineered for compensation of angular misalignment in M16 screw connections across clamped assemblies DIN 6319C standard conformity Compatibility with M16 fasteners Bore Ø 17 mm for accurate seating Compact design for misalignment compensation Reliable alignment and even load distribution A spherical washer manufactured to DIN 6319C provides a controlled spherical contact surface that compensates angular misalignment between a bolt head or nut and the mating surface. By creating a defined seating geometry, the component improves load distribution across the clamped joint, which reduces localised stress peaks and helps maintain clamp force under variable conditions. Compatibility with M16 fasteners and the precise Ø 17 mm bore ensure the washer locates reliably on the bolt shank, simplifying assembly and improving joint durability. Precise dimensions that aid installation and repeatability Key dimensions (D1 Ø17, D3 Ø30, H2 5.3, R 22) define the seating profile and overall envelope, enabling predictable behaviour in standardised assemblies. The defined outer diameter and height guarantee a repeatable contact angle, which is essential when multiple connections must perform consistently. With these measured values, the component supports efficient process planning, easier quality control and interchangeability within existing designs, eliminating guesswork during assembly or maintenance. Suitable applications and practical benefits in everyday use Designed for use wherever angular misalignment may compromise joint performance, the washer is suitable for structural connections, machine frames and fixturing systems utilising M16 screws. The part reduces the need for rework by accommodating slight surface irregularities and aligning fastener loads. Conformity to the DIN standard facilitates procurement and replacement planning, while the compact spherical seating minimises additional space requirements in confined assemblies. For swift supply and technical advice on compatibility, request the AMF spherical washer via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 4000833460NW Standard: DIN 6319C Description: Spherical washer for M16, bore Ø 17 mm Manufacturer: AMF Facts Bore diameter D1: 17 mm Outer diameter D3: 30 mm Height H2: 5.3 mm Radius R: 22 mm Suitable for: M16 Packaging unit: 1 UID: 4000833460NW Special features Conforms to DIN 6319C Compensates angular misalignment in bolted joints Defined spherical seating for uniform load distribution FAQ What is the primary function of this spherical washer? The spherical washer is intended to compensate for angular misalignment and to provide a uniform seating surface for M16 fasteners, improving load distribution in clamped joints. Is this part compatible with standard M16 bolts and nuts? Yes, the washer is specified for M16 applications and features a bore of Ø 17 mm to fit the bolt shank as per the designation. Which dimensions define the washer's seating geometry? Key seating geometry is given by D1 Ø17 mm (bore), D3 Ø30 mm (outer diameter), H2 5.3 mm (height) and radius R 22 mm, which together determine the contact angle and fit. Does the component meet any recognised standard? The part is manufactured to DIN 6319C, ensuring standardised form and interchangeability for assemblies that reference this specification. Can this washer be used to correct significant misalignment in joints? The washer compensates for moderate angular misalignment typical in bolted assemblies; for large misalignments, a detailed joint assessment and specialist solutions may be required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Ball Washer for M20 Screws D1:21 D3:36 H2:6.3 R:27, DIN 6319C - AMF
Take advantage of the DIN‑compliant fit combined with a Ø21 mm bore and clearly defined seating geometry for reliable bolted assemblies — order directly via Metav Werkzeuge or ask the consultants for application support. Spherical washer DIN 6319C by AMF — for M20 screws, bore Ø21 mm The spherical washer DIN 6319C provides a self‑aligning seating surface for hexagon screw connections, engineered for industrial bolted joints where controlled contact geometry and repeatable alignment are required. DIN 6319C standard compliant Bore Ø 21 mm for M20 screws Outer diameter 36 mm, height 6.3 mm Precision radius R 27 mm Reliable standard compliance for secure connections Meeting DIN 6319C ensures consistent seating and repeatable performance in production and maintenance environments. The standardised geometry minimises misalignment between screw head and component, which reduces the risk of uneven clamping forces and subsequent joint loosening. This results in fewer rework cycles and steadier assembly quality across batches, supporting lean production and predictable maintenance intervals. Precise dimensions that speed up assembly The defined bore of Ø21 mm together with an outer diameter of 36 mm and a height of 6.3 mm provides a tight, predictable fit for M20 fastenings. The specified radius R 27 mm aids in distributing contact stresses evenly, lowering the likelihood of surface indentation or component distortion. Such dimensional clarity simplifies fixture planning and reduces the time spent checking tolerances during installation. Improved joint performance through controlled seating A spherical seating element with correct geometry helps the bolted joint accommodate minor angular deviations without imposing additional bending moments on the screw. The result is a more uniform clamping force and improved fatigue behaviour in cyclic loads. For applications that demand stability under vibration or variable loads, this component supports longer service life and lowers the probability of unscheduled downtime. Practical advantages for workshops and industrial users Supplied by AMF and packaged per unit, the part is suited to both repair shops and production lines that require single‑piece ordering for bespoke maintenance tasks. The compact design and familiar standard make it straightforward to stock as a spare part, while the clearly documented dimensions facilitate integration into inventory systems and CAD libraries. Procurement and supply continuity for professionals The component is identified by SKU 4000833461NW and is available through Metav’s procurement channels; selecting standardised parts like this spherical seating washer simplifies logistics and reduces supplier complexity. Professional purchasers benefit from predictable availability and the documentation necessary for quality management and traceability. Contact Metav Werkzeuge for AMF components and expert guidance on dimensional suitability and stocking strategies — the Metav team provides application advice and reliable supply from Emmerich. Technical data Article number: 4000833461NW Standard: DIN 6319C Type: Spherical washer Facts Bore diameter D1: 21 mm Outer diameter D3: 36 mm Height H2: 6.3 mm Radius R: 27 Packaging unit: 1 Special features Compatible with M20 screws Brand: AMF Label: Spherical washer for M20, bore Ø21 mm FAQ Is this washer suitable for M20 screw connections? Yes. The spherical washer is specified for use with M20 screws and features a Ø21 mm bore for correct fit. Which standard does the component comply with? The part complies with DIN 6319C, ensuring standardised seating geometry and repeatable assembly characteristics. What are the key dimensions to check for installation? Key dimensions are the bore Ø21 mm, outer diameter 36 mm and height 6.3 mm; these determine compatibility with mating parts. Can this washer reduce joint loosening under vibration? Yes. The washer’s spherical seating and radius R 27 mm help distribute loads evenly, improving clamping uniformity and resistance to loosening. How is the part identified for ordering and stock control? The article is listed under SKU 4000833461NW and described as a spherical washer to DIN 6319C for M20. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com