Thread and tolerance tables that ensure precise fits for metalworking
Thread and tolerance tables provide machinists and engineers with the exact dimensions and clearance values needed to achieve reliable thread fits, consistent tolerance classes and accurate unit conversions in metalworking. Metav IndustryLine’s tables cover metric and common thread forms as well as ISO tolerance data up to 500 mm, helping to specify the correct fit between bolts and nuts and to determine tolerances such as 6H for internal threads and 6g for external threads. These resources also include a millimetre–inch conversion table for seamless unit changes during design and production.
Conversion Chart mm/Inch, Metric To Imperial Reference - Filetta
Taking advantage of a compact mm ↔ inch conversion reference and a workshop‑friendly format reduces calculation time and minimises measurement errors; this conversion table is an efficient aid for machining and metrology tasks. Order supply enquiries can be directed via Metav Werkzeuge for reliable fulfilment and specification advice. mm/inch conversion table by Filetta — Compact conversion reference The mm/inch conversion table is a compact reference sheet for rapid unit conversion between millimetres and inches, intended for use in machining, inspection and workshop settings. *Quick mm ↔ inch conversions at a glance *Compact, workshop‑friendly format *Durable print for regular use *Suitable for metrology and machining Faster conversions, fewer calculation errors A concise, printed conversion reference removes the need for repeated calculations and reduces transcription mistakes during setup and inspection. As a ready‑to‑hand reference, the table shortens cycle times in repetitive tasks and supports consistent results across operators. For processes where quick unit checks are required, the sheet complements digital instruments by providing an immediate, readable conversion between mm and inch, helping teams maintain workflow continuity without interrupting machine cycles. Integrates smoothly into metrology and workshop routines The mm/inch conversion table by Filetta fits naturally into quality control and production environments where mixed unit systems occur. The layout is designed for clear legibility during inspection rounds, enabling faster decision making in calibration, part verification and measurement documentation. In combination with calibrated measuring tools, this reference aids standardised entries in protocols and reduces interpretative errors when cross‑referencing drawings and fixtures, thereby supporting traceable measurement workflows. Compact format built for everyday use The slim, durable format makes the table easy to store at the bench, inside inspection folders or alongside tool trolleys; this promotes frequent use without degradation. Printed for clarity and longevity, the sheet is intended as a practical addition to training kits and workshop handbooks where quick access to mm ↔ inch conversions is required. The product is identified by SKU MS835.164, which simplifies catalogue reference and procurement within established supply chains. Request the Filetta mm/inch conversion table (SKU MS835.164) through Metav Werkzeuge for dependable supply from Emmerich and expert advice on specification and integration Technical data Article number: MS835.164 Product name: mm/inch conversion table Brand: Filetta Purpose: Conversion between mm and inch Facts Units: mm, inch Format: Reference table Physical dimensions: not specified Special features Compact, workshop‑friendly format Durable print suitable for regular use Intended for machining and inspection environments FAQ Is the table suitable for precision metrology use? The Filetta mm/inch conversion table is designed as a quick reference to support precision workflows but does not replace calibrated measuring instruments; it assists with unit interpretation and reduces conversion errors. Which units and ranges does the table cover? The sheet provides direct conversions between millimetres and inches for standard workshop ranges, enabling fast cross‑checks without calculation. Can the conversion table withstand everyday workshop conditions? The table is produced with a durable print and compact format intended for regular use at the bench or in inspection folders, making it suitable for routine workshop environments. Is the table useful for training and documentation? Yes, the reference format is well suited to training situations and documentation packs, helping new staff and trainees to interpret mixed‑unit drawings and measurement protocols. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
M3–M24 Metric Thread Identification Set Aluminium Anodised, Plastic Case - Filetta
Take advantage of precise, rapid thread identification combined with a lightweight, corrosion‑resistant design for smoother assembly and inspection workflows. The set’s anodised aluminium gauges and organised plastic case enable fast checks of common metric threads; order directly via Metav Werkzeuge or contact our consultants for technical advice. Gewindekontrollsatz MS910.425 — Thread gauge set (anodised aluminium, metric) by Filetta The Gewindekontrollsatz is a compact identification set for metric internal and external threads, intended for workshop inspection, maintenance and assembly tasks Anodised aluminium construction For metric internal and external threads Supplied in a durable plastic case 20-piece set covering M3–M24 Faster thread identification for everyday production The gauge set accelerates routine identification and basic verification of metric screw threads, reducing time lost on uncertain assembly decisions. Thanks to the wide size range from M3 to M24 and the inclusion of both internal and external gauges, common pitches and diameters can be checked on the spot. The primary benefit is operational efficiency: fewer stoppages during assembly and faster throughput in inspection processes. The solid, repeatable fit of each gauge supports reliable visual and tactile confirmation of thread form and pitch. Lightweight, corrosion‑resistant construction for frequent handling Being manufactured from anodised aluminium, the components combine durability with low weight, making them comfortable for daily use in bench and field environments. The surface treatment helps resist wear and corrosion, preserving the profile of each gauge and extending service life. Packaged in a plastic case that keeps items organised and protected, the set is easy to transport between workstations and to store without risk of damage to the thread contours. This construction promotes consistent handling with minimal maintenance. Practical scope for incoming inspection and maintenance The set is designed as a practical aid for incoming goods inspection, routine maintenance and quick on‑machine checks. It is intended for identification and coarse verification rather than micrometric measurement: the gauges confirm thread form and common pitch compatibility to avoid assembly errors. For workshops that need straightforward, rapid decisions—accept, reject, or select the correct fastener—this solution reduces rework and saves time in quality control routines while supporting a smooth production flow. Clear contents and metric compatibility for everyday sizes Contents include gauges for standard metric sizes that are frequently encountered in mechanical and electrical assemblies. The 20‑piece composition covers a typical workshop spectrum from smaller machine screws up to larger bolts used in fixtures and assemblies. This configuration makes the set suitable as a bench reference or as part of a mobile inspection toolkit, supporting technicians who require quick identification without complex measurement equipment. The lightweight profiles and organised layout aid rapid selection and return to service. For reliable metric thread identification from Filetta choose Metav Werkzeuge — contact our Emmerich specialists for tailored advice and fast supply via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: MS910.425 Manufacturer: Filetta Material: anodised aluminium Thread type: metric Set: 20 pieces Facts Sizes included: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0 Suitable for: internal and external threads Special features Identification and basic verification of metric threads Lightweight, corrosion‑resistant anodised finish Supplied in a protective plastic case Compact, workshop‑oriented organisation FAQ What is the primary purpose of this gauge set? The Gewindekontrollsatz MS910.425 by Filetta serves for quick identification and basic verification of metric internal and external threads to support inspection and assembly decisions. Can the gauges measure thread tolerances precisely? The set is intended for identification and coarse verification rather than precision tolerance measurement; for high‑accuracy checks, use calibrated metrology instruments. Which sizes are covered by the set? The set contains 20 gauges covering common metric sizes from M3x0.5 up to M24x3.0, suitable for many workshop and maintenance tasks. Is the material suitable for frequent workshop use? Yes — the gauges are made from anodised aluminium, providing a balance of lightweight handling and corrosion resistance for regular use. Does the set include a case for transport and storage? The Filetta MS910.425 is supplied in a durable plastic case that keeps each gauge protected and organised for transport between workstations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Thread Table With Multiple Thread Standards, Quick Reference Chart - Filetta
Take advantage of the combination of wide standard coverage, clear dimension data and compact shop-floor usability to speed up design and inspection tasks; order the thread chart via Metav Werkzeuge or ask our consultants for application advice. Filetta Thread Chart – comprehensive thread dimension reference, clear-format A Filetta Thread Chart that provides an immediate overview of thread dimensions across common international systems, intended as a compact reference for design, production and inspection. Universal lookup for Metric, UNC, UNF, BSW Clear dimensions for Gas and BA threads Compact format for shop-floor reference Useful for design, inspection and procurement Fast decisions with consolidated thread data The core benefit of this reference is the consolidation of many standards into a single sheet. The chart lists sizes and key dimensions for metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M and EG-MF, enabling rapid decisions during setup and verification. By combining these standards, the table reduces the need to consult multiple manuals and supports faster tool selection and drawing checks. Clear labelling and organised columns turn otherwise time-consuming lookups into a quick verification step, which improves shop-floor throughput and reduces machine idle time. Improved accuracy for manufacturing and inspection Having standard dimensions collated in one reference lowers the risk of specification errors when producing threaded parts. The chart highlights pitch, nominal diameters and common conversions, making it straightforward to match taps, dies and mating components. This logical presentation supports quality control routines and assists inspectors in cross-checking parts against the correct standard. Presented as a compact, easy-to-read layout, the reference helps maintain measurement integrity without complex interpretation, supporting reliable outcomes in both small-series manufacturing and routine maintenance. Practicality for engineers, buyers and technicians Designed to serve multiple roles, the table is a practical tool for designers verifying thread fits, for procurement teams specifying the correct fasteners, and for technicians performing assembly checks. The compact format is suited to the toolroom, drawing office or bench, meaning the information is available where decisions are actually taken. With its focus on usability, the reference speeds up specification workflows and contributes directly to process efficiency—an economical improvement in daily operations. Clear communication between teams and suppliers Standardised references reduce misunderstandings between design, production and suppliers. Using one authoritative chart for common thread forms creates a single source of truth that simplifies ordering and reduces returns due to mismatched threads. The clear mapping of thread types and sizes supports consistent documentation in technical drawings and procurement lists, improving collaboration across departments and with external partners. Contact Metav Werkzeuge today for procurement support, bulk orders or specific format requests for the Filetta Thread Chart (SKU MS835.162) — expert advice and reliable delivery from Emmerich are available to help integrate this reference into your workflow Technical Data Article number: MS835.162 Name: Thread Chart (Gewindetabelle) Manufacturer: Filetta UID: MS835.162 Facts Standards included: Metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M, EG-MF Purpose: Quick lookup of thread dimensions and pitches Intended use: Design checks, inspection reference, procurement specification Special features Consolidated display of multiple international thread systems Compact, shop-floor friendly format Suited for engineers, inspectors and purchasing staff FAQ Which thread standards are covered in the chart? The chart lists common standards including metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG‑M and EG‑MF for immediate comparison. Is this chart suitable as a shop-floor reference? Yes, the Filetta Thread Chart (SKU MS835.162) is designed for quick lookups at the bench or in the toolroom and is optimised for practical use by technicians and inspectors. Can the table be used for procurement specifications? The consolidated dimensions and standard identifiers make the chart appropriate for clear procurement documentation and ordering lists. Does the chart include pitch and nominal diameter data? Yes, the presentation includes key dimension data such as pitch and nominal diameters to aid fitting and tool selection. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Tolerancing Table ISO 286‑2 Reference Chart, Up to 500mm – Filetta
Combine ISO 286‑2 compatibility with an instant lookup of more than 6,400 tolerance values for reliable design decisions and consistent inspection results — order the Tolerance table directly via Metav Werkzeuge or contact our consultants for tailored advice. Tolerance table — ISO 286‑2 reference chart (up to 500 mm) by Filetta The Tolerance table is a compact reference chart for immediate reading of tolerance values and fits according to ISO 286‑2, intended for engineering, quality control and workshop use. ISO 286‑2 compatibility up to 500 mm Over 6,400 tolerance entries Immediate reading for fits and tolerances Suitable for internal and external dimensions Faster decisions with standardised tolerance data The reference matrix provides a single, standardised source for clearance, transition and interference fits, reducing time spent searching dispersed tables. With direct mapping to ISO 286‑2 and coverage to 500 mm, the chart supports rapid verification of nominal sizes and tolerances, enabling engineers to confirm fit classes and tolerance zones without complex calculations. The compact presentation of tolerance values accelerates decision-making in design reviews and first-off inspections. Clear guidance for assemblies and inspection routines Presented as an immediate-reading table, the chart removes ambiguity when selecting shaft and hole tolerances for bearings, housings or shafts. The organised layout helps translate ISO class designations into usable limits for production and QC, so tolerance checks can be executed consistently on the shop floor. Where traceable documentation is needed, the dataset of 6,400+ entries serves as a reliable reference for specifying fits in drawings and inspection protocols. Practical benefits for workshops and design offices Adopting a single reference chart reduces errors caused by cross-referencing multiple sources and supports faster training of technicians and junior engineers. The concise format is optimised for routine tasks — from tolerance verification during assembly to prepare-for-inspection checks — and complements digital workflows where a human-readable standard is required alongside CAD and measurement reports. The association with Filetta denotes a focused tool for metrology professionals who value clarity and compliance. For standards-compliant tolerance reference and rapid integration into inspection routines, request the Filetta Tolerance table from Metav Werkzeuge today — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical Data Article number: MS835.163 Name: Tolerance table Brand: Filetta Label: Toleranztabelle Facts Standard: ISO 286‑2 Scope: up to 500 mm Entries: >6,400 tolerance values Special features Immediate-reading table of tolerance values and fits Includes internal and external dimensions Data suited to engineering and workshop reference FAQ What standard does this reference follow? The Filetta Tolerance table follows ISO 286‑2, providing standardised tolerance classes and zones for engineering use. Up to which nominal size are tolerance values provided? The chart covers nominal sizes up to 500 mm, with entries for both internal and external dimensions. How extensive is the dataset included in the chart? The reference contains more than 6,400 tolerance values for quickly determining fits and limits. Is this chart suitable for shop‑floor inspection tasks? Yes — the immediate‑reading format makes the chart suitable for routine inspection, assembly checks and specification clarification in the workshop. Can the table help when specifying fits on technical drawings? The dataset translates ISO class designations into practical limit values, supporting clear specification of fits and tolerances on drawings. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Find precise thread sizes and tolerances quickly
Thread and tolerance tables from Metav IndustryLine bring clarity to component design and assembly by supplying consolidated, norm‑based data for threads, fits and unit conversion. The set comprises a thread table, an ISO tolerance table for fits and a millimetre‑to‑inch conversion table, all compiled for practical use in workshop and production environments.
Why these tables matter in machining and assembly
Thread tables provide the detailed dimensions and form data engineers and machinists need when specifying or checking fasteners. The ISO tolerance table translates fit classes into actionable limits and clearances for shafts and bores, while the conversion table removes guesswork when working across metric and imperial systems. Together they support quality control, tool selection and first‑pass assembly, especially in contexts where compliance with standards such as DIN 13 and ISO 965 is required.
Practical benefits that reduce rework and speed up production
- Faster decision making: ready access to standard thread dimensions for metric, BSF, UNC, UNF, UNEF, Pg, BA and gas threads.
- Consistent fit specification: coverage of ISO fits up to 500 mm, with over 6400 tolerance values for internal and external dimensions.
- Standards compliance: data referenced to ISO R286‑1962, helping to avoid mismatches at procurement and assembly.
- Unit accuracy: a dedicated millimetre‑to‑inch conversion table to eliminate conversion errors between metric and imperial drawings.
- Reduced setup time: clear tolerance classes such as 6H (internal) and 6g (external) streamline the choice of drill size, thread taps and gauges.
Why Metav IndustryLine is the logical choice for precision tooling information
Metav IndustryLine combines decades of industry knowledge with a European supply approach centred in Emmerich. As a precision partner, Metav offers a wide product range and supply reliability that supports both single workshops and larger industrial buyers. With more than 48,000 customers and an inventory designed to act as a quality filter for the market, Metav IndustryLine positions the thread and tolerance tables as a dependable reference for procurement and engineering decisions.
In short
Metav IndustryLine thread and tolerance tables consolidate thread dimensions, ISO fit tolerances and millimetre‑to‑inch conversions to help you specify, check and assemble components with fewer errors and faster throughput.
FAQ
Which tolerance is recommended for metric internal threads?
The recommended tolerance for metric internal threads is 6H; the Metav IndustryLine tolerance table explains how that class produces an average fit between bolt and nut.
What does the tolerance designation 6H indicate?
The designation 6H names the tolerance grade and position for the internal thread profile; the Metav IndustryLine ISO tolerance table clarifies the numeric grade and the tolerance field location used to determine permissible limits.
Does M10 mean a 10 mm diameter?
Yes. An M10 thread has a nominal external diameter of 10 mm; the Metav IndustryLine thread table lists the exact major, minor and pitch diameters for standard metric sizes.
How large are the ISO fit tables and what do they cover?
The ISO fit table covers sizes up to 500 mm and contains more than 6400 tolerance values for both internal and external dimensions, making it suitable for a wide range of precision engineering tasks.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com