0 16mm Rod Clamp With Small Angle Foot M4x20 Pressure Screw, 800 N Holding Force - AMF
Take advantage of the compact design and reliable clamping performance: the small angled foot enables flexible mounting while the 800 N maximum clamping force and 16 mm stroke ensure secure operation in confined fixture and jig applications. Order the clamp directly via Metav Werkzeuge or contact their consultants for further technical advice. AMF push-rod clamp No. 6841, Size 0 – small angled foot The AMF push-rod clamp No. 6841 is a compact push-rod clamping element for fixture and jig construction, designed for versatile mounting where space is limited and repeatable clamping force is required. Compact size 0 for confined fixture spaces Maximum clamping force 800 N 16 mm stroke for secure engagement Small angled foot for flexible mounting Secure clamping performance in tight spaces The push-rod locking element delivers a consistent maximum clamping force of 800 N, making it suitable for light to medium fixture tasks where dependable force is essential. The 16 mm stroke provides a defined travel distance for the actuator rod, so engagement and release are repeatable and measurable. This characteristic reduces setup time and contributes to process stability on assembly jigs and test fixtures. The compact size 0 format is specifically suited for installations with limited clearance while still providing measurable holding capability and mechanical reliability. Flexible installation and clear mechanical interfaces Installation is simplified by the small angled foot, which allows the clamp to be mounted in challenging orientations without the need for custom brackets. The unit includes a pressure screw M4 x 20 for fine adjustment of contact pressure and an interface thread M10x1 for secure attachment. These standardised connections enable straightforward integration into existing tooling plates and modular fixtures. The defined dimensions (for example, A = 6.5 mm, B range = 17–33 mm) support precise positioning during fixture design and help to avoid interference with moving parts. Designed for dependable production use and easy specification This clamping device is engineered for repeatable operation, with a clear separation between actuation travel and applied force that eases specification in technical drawings and bills of materials. The mechanical design focuses on longevity and low-maintenance performance, which in turn supports higher uptime in small-batch production and specialised fixtures. For clarification of fit or compatibility with other components, further technical data can be supplied and additional measurements provided on request; Metav Werkzeuge is available to assist with component selection and integration queries. Contact Metav Werkzeuge for tailored advice on integrating the AMF push-rod clamp No. 6841 into production fixtures or for immediate ordering from Emmerich. Technical data Article number: 4000833515NW Type: 6841 Product: Push-rod clamp Manufacturer: AMF Packaging unit: 1 Core data Max clamping force: 800 N Max holding force: 800 N Stroke: 16 mm A: 6.5 mm B min: 17 mm B max: 33 mm D: 4.5 mm E: 13 mm H: 12 mm H1: 49.3 mm K: 6.5 mm L1: 66.5 mm L2: 10 mm M max: 16 mm Thread M2: M10x1 N: 25 mm P: 16 mm Design & special features Size: 0 Pressure screw: M4 x 20 Small angled foot Compact design for fixture and jig mounting FAQ What is the maximum clamping force of this clamp? The AMF push-rod clamp No. 6841 provides a maximum clamping force of 800 N, suitable for light to medium fixture operations. What is the stroke of the clamping rod and why does it matter? The device has a 16 mm stroke; this defines the travel distance for engagement and ensures repeatable clamping positions in jigs and fixtures. Which mounting options are available for constrained spaces? The small angled foot allows flexible mounting orientations, enabling the clamp to be positioned where straight-foot clamps may not fit. What thread and adjustment interfaces are provided? The clamp includes a pressure screw M4 x 20 for contact adjustment and a thread M10x1 for secure attachment into the fixture layout. Is the clamp suitable for standard fixture plates and modular systems? Yes, the dimensional data (for example A = 6.5 mm, B = 17–33 mm) is intended to support integration into standard tooling plates and modular fixture systems using common fastening threads and adjustments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pull Rod Clamp Size 5 With Small Angle Foot, Stroke 40mm, Hold Force 4500N - AMF
Take advantage of a compact, high-force clamping solution with a small angled foot and a maximum holding force of 4,500 N for reliable fixture operation; order directly via Metav Werkzeuge or consult our advisors for application support. AMF Push-rod Clamp No. 6841, Size 5 — small angled foot, 4,500 N holding force The AMF Push-rod Clamp No. 6841 is a compact push-rod clamp designed for fixture and workholding tasks where space is limited and consistent clamping force is required. Size 5 push-rod clamp Max clamping force 4,500 N 40 mm stroke for secure clamping Small angled foot for compact setups Consistent clamping power for reproducible processes The clamp delivers a maximum clamping force of 4,500 N, ensuring reproducible hold in repetitive operations. The integrated 40 mm stroke permits reliable engagement across variable workpiece heights, while the standard M12 x 50 pressure screw enables straightforward force transmission. These specifications support process stability and reduce rework, which in turn contributes to predictable cycle times and lower scrap rates. Compact mounting that optimises fixture layouts Thanks to the small angled foot, this clamp is suitable for tight jigs and assemblies where clearance is at a premium. The compact footprint allows for denser tool placement without sacrificing accessibility for loading and unloading. The design therefore supports efficient use of machine table real estate and simplifies fixture design for short-run and batch production. Robust mounting and straightforward integration into assemblies The unit includes a mounting thread M24 x 1.5 and metric attachment points that comply with common shop standards, easing installation into existing tooling plates. The durable mechanical concept is intended to withstand frequent actuation without complex maintenance, helping to keep machine downtime to a minimum. Spare parts such as the pressure screw are metric and readily replaceable, supporting long-term serviceability. Suitable applications and target environments This clamp is engineered for fixture building, general workholding and assembly fixtures in manufacturing environments that require compact, high-force clamping. The size and force characteristics make it suitable for metalworking jigs, testing rigs and production tooling where a secure, repeatable clamp is needed but space is restricted. The performance values support placement in both manual and automated stations. For robust, compact clamping choose AMF and contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833519NW Type: 6841 Brand: AMF Product type: Push-rod clamp Execution: with small angled foot Packaging unit: 1 Facts Max clamping force: 4,500 N Holding force max: 4,500 N Stroke: 40 mm Pressure screw: M12 x 50 Size: 5 A: 16 mm B min: 41.5 mm B max: 81.5 mm D: 8.5 mm E: 50 mm H: 30 mm H1: 129.5 mm K: 15.5 mm L1: 171.5 mm L2: 25 mm M min: 29 mm M max: 46 mm M2: M24 x 1.5 N: 65 mm P: 35 mm Special features Small angled foot Size 5 Pressure screw M12 x 50 M24 x 1.5 mounting thread Compact design for tight fixtures FAQ What maximum clamping force does this clamp provide? The AMF Push-rod Clamp No. 6841 (SKU 4000833519NW) provides a maximum clamping force of 4,500 N. What is the available stroke of the clamping rod? The clamping rod has a stroke of 40 mm, allowing compensation for varying workpiece heights. Which pressure screw is fitted to the clamp? The unit is supplied with a pressure screw M12 x 50 for force transmission. How is the clamp mounted in a fixture? Mounting is via an M24 x 1.5 thread and standard metric interfaces compatible with common tooling plates. For which applications is this clamp intended? It is designed for fixture building, general workholding and assembly fixtures where compact dimensions and high holding force are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp No. 6842 Heavy Duty Tension/Compression 10,000 N Holding Force, 40mm Stroke - AMF
Benefit from a heavy‑duty, size 5 push‑rod clamp offering a 10,000 N clamping capacity and a 40 mm stroke for secure axial holding; order the push‑rod clamp directly via Metav Werkzeuge or contact our consultants for application advice. Push‑rod clamp No. 6842 — heavy duty, size 5 (AMF) The Push‑rod clamp No. 6842 is a heavy‑duty push/pull rod clamp designed for secure axial clamping in jigs, fixtures and repetitive production processes. Heavy‑duty design, size 5 Up to 10,000 N clamping force 40 mm stroke length M12 x 50 pressing screw Reliable axial clamping that reduces setup risk The rod clamp delivers a 10,000 N rated clamping force with a 40 mm stroke, providing consistent axial holding for production and assembly tasks. This performance translates into shorter cycle times and reduced rework, because the component is held securely during machining or joining operations. The design focuses on predictable force transmission and repeatability, so fixtures remain stable under load and downtime from loose workpieces is minimised. Robust construction for continual industrial use Built as a heavy execution in size 5, the unit is suited to demanding shop‑floor conditions. The clamp uses an M12 x 50 pressing screw and features adjustable mounting ranges (B min 58 mm, B max 98 mm) to accommodate different fixture geometries. These measurable dimensions simplify integration into modular tooling and make design verification straightforward when planning nests or dedicated fixtures. The combination of a compact footprint and clearly specified dimensions supports fast retrofitting into existing setups. Faster integration and dependable operation in production Integration is streamlined by clear, measurable geometry such as L1 174 mm and a consistent holding force 10,000 N, which aid layout calculations for indexing and movement clearance. The push/pull principle ensures a positive mechanical action for both pressing and withdrawing, which reduces adjustment needs and improves operator confidence. Reliable clamping contributes to higher first‑pass yield and a more efficient workflow on the shop floor, while the compact heavy‑duty design preserves valuable bench or fixture space. Contact Metav Werkzeuge for tailored procurement and technical guidance to secure the AMF push‑rod clamp No. 6842 for consistent, heavy‑duty fixture clamping. Technical data SKU: 4123680150NW Type: 6842 Product: Push‑rod clamp Brand: AMF Version: heavy Packaging unit: 1 Facts Max clamping force: 10,000 N Holding force: 10,000 N Stroke: 40 mm Pressing screw: M12 x 50 A: 16 mm B min: 58 mm B max: 98 mm C: 41 mm D: 8.5 mm E: 50 mm H: 38 mm H1: 137.5 mm K: 45 mm L1: 174 mm M min: 41 mm M max: 50 mm N: 71 mm P: 121 mm Special features Heavy duty execution, size 5 Push/pull operation Size designation: 5 M12 x 50 pressing screw FAQ What maximum clamping force does this clamp provide? The push‑pull rod clamp provides a maximum clamping force of 10,000 N; this is stated for the Push‑rod clamp No. 6842 (AMF, SKU 4123680150NW). What is the available stroke and how does it affect fixture design? The unit offers a 40 mm stroke, which allows for sufficient travel to accommodate workpiece tolerances and movement in fixtures when using the Push‑rod clamp No. 6842 (AMF). Which dimensions are most relevant for integrating the clamp into a jig? Key dimensions include L1 174 mm, B min 58 mm and B max 98 mm; these values support precise placement and mounting within fixture layouts using the AMF clamp. Is the clamp suitable for continuous production cycles? Yes, the heavy execution and rated holding force make the AMF push‑rod clamp No. 6842 suitable for repetitive industrial use, offering consistent performance in production environments. What fixing thread is used for the pressing screw? The pressing screw specification is M12 x 50, which simplifies replacement and integrates with standard fastening components for the AMF clamp. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp Size 2 Small Angle Foot M6 Pressure Screw 2,000N Holding Force - AMF
Take advantage of a compact clamping solution that delivers 2,000 N holding force with a 26 mm stroke and a space-saving angled foot for flexible fixture layouts — order directly via Metav Werkzeuge or request advice from our consultants to ensure immediate integration into existing setups. AMF Push‑rod Clamp No. 6841 (Size 2) – small angled foot, 2,000 N holding force The AMF Push‑rod Clamp No. 6841 is a compact push‑rod clamping unit designed for medium‑duty fixturing, featuring a small angled foot that enables low-profile installation in confined work areas. Compact size small angled foot 2,000 N maximum holding force 26 mm stroke for secure clamping M16×1.5 threaded mount High clamping performance for reliable production flow The clamp provides a consistent maximum clamping force of 2,000 N, ensuring secure fixation during machining and assembly operations. With a 26 mm stroke and robust kinematics, the mechanism converts axial actuation into reliable clamp travel, supporting repeatable positioning and reduced rework. The technical design focuses on measurable performance so planners and purchasing can compare fixtures on objective criteria rather than subjective claims. Space‑saving mounting and straightforward integration The small angled foot reduces the required mounting envelope, allowing the unit to be fitted where vertical clearance is limited. Threaded mounting via M16×1.5 and the included contact screw M6×25 simplify attachment to plates and sub‑frames. Dimensional data such as A = 10 mm, B min = 32.5 mm to B max = 58.5 mm and L1 = 114 mm support precise CAD integration and ensure the clamp can be positioned without redesigning existing jigs. Robust operation and low maintenance for workshop reliability Constructed for frequent actuation and consistent holding force, the clamp requires minimal upkeep while delivering predictable behaviour over service life. The angled foot design helps protect the actuation elements from direct chip flow in many setups. Specified adjustment ranges (M min = 31.8 mm, M max = 36 mm) provide tolerance compensation during assembly, reducing setup time and supporting higher first‑time‑right rates on the shop floor. Contact Metav Werkzeuge for specification matching or to arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 — our consultants will advise on fixture planning and compatibility with existing equipment. Technical data Article number: 4000833517NW Type: 6841 Designation: Push‑rod clamp No. 6841 Size 2, small angled foot Manufacturer: AMF Product type: Push‑rod clamp Packaging unit: 1 Facts Maximum clamping force: 2,000 N Maximum holding force: 2,000 N Stroke (Hub): 26 mm A: 10 mm B min: 32.5 mm B max: 58.5 mm D: 5.6 mm E: 20 mm H: 20 mm H1: 85.5 mm K: 12.5 mm L1: 114 mm L2: 19 mm M min: 31.8 mm M max: 36 mm M2: M16×1.5 N: 50 mm P: 34 mm Special features Execution: with small angled foot Size: 2 Contact screw: M6×25 Type designation: 6841 Compact mounting footprint FAQ What is the maximum clamping force of this clamp? The AMF Push‑rod Clamp No. 6841 provides a maximum clamping force of 2,000 N, specified for consistent holding during common fixturing tasks. What stroke does the clamp offer and how does it affect fixture design? The clamp has a 26 mm stroke; this travel allows secure engagement and tolerance compensation within the stated M min/M max range, aiding precise fixture layout. Which mounting thread is required for installation? Mounting uses an M16×1.5 threaded interface (M2) and the unit includes a contact screw specified as M6×25 for local adjustments. Is the clamp suitable for tight installation spaces? Yes, the small angled foot reduces the vertical and lateral mounting envelope, making the unit suitable for restricted or compact fixture designs. How is repeatability and maintenance handled for this product? The clamp is engineered for frequent actuation with minimal routine maintenance; its mechanical design prioritises repeatable holding force and long‑term reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp Type 6841 With Small Angle Foot, 2,500 N Holding Force - AMF
Reliable clamping with a compact footprint and straightforward adjustment reduces set-up time and increases throughput. The combination of a 2,500 N clamping capability and a 32 mm stroke delivers secure holding and repeatable operation; order the Push-rod clamp No. 6841 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp No. 6841 (size 3) — small angled foot, 2,500 N, 32 mm stroke — AMF The Push-rod clamp No. 6841 offers robust, space-saving holding for jigs and fixtures in machining and assembly, supplied with a small angled foot for compact installation. High clamping force 2,500 N 32 mm stroke for secure positioning Compact small angled foot design M8 x 35 pressure screw included Secure hold for repetitive production tasks The push-rod clamp design converts linear movement into a reliable clamping action, providing a maximum clamping and holding force of 2,500 N which reduces part movement and rework during machining. This performance is especially valuable in series production or fixture-heavy work where consistent force equals fewer rejects. The specified 32 mm stroke offers a balance between reach and rigidity, allowing the clamp to engage securely even with varying part heights while maintaining a compact presence in the fixture layout. Compact installation with adjustable reach A small angled foot allows mounting where vertical space is limited and gives the clamp a compact footprint on the workpiece. The adjustable dimensions — including a variable B range (min 37 mm to max 69 mm) and M min/max (29.5 mm–42.5 mm) — enable flexible positioning and easy adaptation to different part geometries. This adjustability permits faster changeovers and a simpler setup process, translating into measurable time savings on the shop floor without sacrificing clamping reliability. Simple fastening and repeatable operation Fitting and adjustment are straightforward thanks to the supplied M8 x 35 pressure screw and a threaded connection of M20 x 1.5, which ensure repeatable preload and quick replacement if required. The clamp’s dimensions (for example L1 140 mm, H1 108 mm) support predictable integration into existing fixtures. The straightforward mechanical function demands minimal maintenance, supporting a high degree of uptime and consistent precise clamping over long production runs. Secure reliable clamping with AMF’s Push-rod clamp No. 6841 — contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833518NW Type: 6841 Product: Push-rod clamp with small angled foot Manufacturer: AMF Core dimensions Stroke: 32 mm A: 12 mm B min: 37 mm B max: 69 mm D: 6.5 mm E: 30 mm H: 25 mm H1: 108 mm K: 13 mm L1: 140 mm L2: 22 mm M min: 29.5 mm M max: 42.5 mm Thread (M2): M20 x 1.5 N: 60 mm P: 30 mm Max clamping/holding force: 2,500 N Design and features With small angled foot Pressure screw: M8 x 35 Packaging unit: 1 Size designation: 3 FAQ What maximum clamping force does this clamp provide? The clamp delivers a maximum clamping and holding force of 2,500 N with the Push-rod clamp No. 6841 from AMF (SKU 4000833518NW). Is the clamp suitable for fixtures with limited vertical space? Yes, the small angled foot and compact dimensions of the AMF Push-rod clamp No. 6841 make it suitable for installations with restricted vertical clearance. Which adjustment ranges are available for different part sizes? Adjustable ranges include B from 37 mm to 69 mm and M from 29.5 mm to 42.5 mm, enabling flexible positioning in various fixture designs. What fastening parts are supplied or required for installation? The unit is specified with an M8 x 35 pressure screw and a threaded connection of M20 x 1.5 for secure attachment and repeatable preload. Is the clamp appropriate for series production environments? Its repeatable mechanical action, simple maintenance requirements and robust clamping force make the Push-rod clamp No. 6841 well suited to series production and repetitive machining tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamping Cylinder Heavy Duty Push/Pull Clamp 4000 N, 32mm Stroke - AMF
Take advantage of a robust combination of heavy-duty push/pull actuation and 4,000 N holding power to secure reliable clamping in repetitive production tasks; the compact Size 3 design with a 32 mm stroke simplifies integration and reduces setup time. Order directly via Metav Werkzeuge or contact their consultants for technical clarification. AMF Push-Pull Clamp No. 6842, Size 3 — Heavy-duty push/pull clamping The AMF Push-Pull Clamp No. 6842 (Size 3) is a heavy-duty push/pull clamping element designed for industrial workholding where consistent actuation and secure holding are essential. Heavy-duty push-pull design Max clamping force 4,000 N 32 mm stroke for positive actuation Adjustable clamping range 40–72 mm Reliable clamping force for continuous production The device delivers a maximum clamping and holding force of 4,000 N, offering predictable performance for repetitive operations and automated sequences. The robust actuation ensures consistent contact pressure across cycles, reducing the need for frequent rechecking and lowering downtime. With its 32 mm stroke, the mechanism provides sufficient travel for secure engagement while keeping movements compact; this helps maintain cycle efficiency and repeatability on production lines where space and timing are critical. The heavy-duty construction supports stable clamping under regular industrial loads and contributes to process reliability. Flexible adjustment for varied setups An adjustable clamping range from 40 mm to 72 mm enables adaptation to different workpiece thicknesses without complex modification. The integrated pressure/adjustment screw M8 x 35 allows fine calibration of contact pressure, enabling precise positioning and secure fixation. These measurable settings mean fixtures can be aligned quickly and reproducibly, which shortens changeover times and simplifies jig design. Clear numerical values such as A = 12 mm, C = 41 mm and L1 = 139 mm assist planners in checking fitment in CAD layouts or on bespoke fixtures before installation. Compact footprint with straightforward integration The compact dimensions and organised geometry make mounting and integration into assemblies straightforward. Key dimensional references—H1 = 116 mm, N = 60 mm, P = 95 mm—support accurate space planning and ensure the clamp fits into confined fixtures. The heavy execution keeps the mechanism robust without excessive bulk, so the unit can be placed close to the workpiece for direct force application. Where repeatability and minimal setup are priorities, this push/pull element provides a dependable balance between size and performance. Durable design that supports process quality Built for repetitive industrial use, the clamp’s heavy design and clear mechanical parameters promote long service intervals and consistent results. The push and pull functionality allows reversible actuation, which is useful in applications requiring both applied force and retention. By relying on fixed, measurable properties rather than adjustments by feel, the clamp helps establish reproducible clamping routines that support quality assurance across batches. For integration advice or to secure supply of the AMF heavy-duty push-pull clamp, contact Metav Werkzeuge in Emmerich — their specialists provide technical support and reliable delivery from stock via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4123680130NW Type: 6842 Product: Push-pull clamp Execution: heavy Manufacturer: AMF Packing unit: 1 UID: 4123680130NW Facts Max clamping force: 4,000 N Max holding force: 4,000 N Stroke: 32 mm A: 12 mm B min: 40 mm B max: 72 mm C: 41 mm D: 6.5 mm E: 30 mm H: 30 mm H1: 116 mm K: 28 mm L1: 139 mm M min: 36 mm M max: 44 mm N: 60 mm P: 95 mm Pressure screw: M8 x 35 mm Special features Size: 3 Heavy-duty design Push and pull clamping function Adjustable clamping range 40–72 mm Pressure/adjustment screw M8 x 35 Brand: AMF FAQ What is the maximum clamping force of this clamp? The AMF Push-Pull Clamp No. 6842 (SKU 4123680130NW) provides a maximum clamping and holding force of 4,000 N, suitable for many heavy-duty workholding tasks. What stroke and travel adjustments does the clamp offer? The unit features a 32 mm stroke and an adjustable clamping range from 40 mm to 72 mm, with a pressure screw specified as M8 x 35 for fine adjustment. Which size is this push-pull clamp and why does size matter? This is Size 3; size indicates the physical class and typical force capacity, helping fixture designers select an appropriately proportioned clamp for the intended load and available installation space. How does the clamp support repeatable positioning in fixtures? Measured parameters such as A = 12 mm, L1 = 139 mm and defined stroke and adjustment ranges ensure fixtures can be set up with predictable geometry, aiding reproducible clamping and consistent part quality when using the AMF Push-Pull Clamp No. 6842. Is the clamp suitable for reversible actuation requirements? Yes, the push and pull function of the heavy execution enables reversible actuation, allowing both application of force and retention in automated or manual clamping scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pusher Clamp Type 6845 Pressure Clamp Size 3, Max Force 4000 N - AMF
Benefit from a compact, high‑force clamping solution that delivers 4,000 N of holding power and a fitted M8 x 35 pressure screw for repeatable setup. Order directly via Metav Werkzeuge or request application advice from our consultants. AMF Pushrod Clamp No. 6845, Size 3 — Pressure clamp with 4,000 N clamping force The AMF Pushrod Clamp No. 6845, Size 3 is a compact pressure clamp engineered for secure workpiece retention in fixtures and jigs across machining and assembly tasks. Compact Size 3 design Max. clamping force 4,000 N M8 x 35 pressure screw included Stable clamping force for reliable machining results The device provides a 4,000 N maximum clamping force, which ensures secure retention of components during cutting, drilling or assembly. High clamping force reduces vibration and movement, lowering the risk of burrs or rework and improving cycle reliability. For users unfamiliar with force metrics: 4,000 N corresponds to a robust hold suitable for many medium‑duty fixture applications, enabling shorter set‑up times and steadier process parameters. Space‑efficient Size 3 body improves fixture design The Size 3 format places a premium on footprint without sacrificing performance. Its compact body allows integration into tight fixture layouts, freeing up space for additional tooling or multiple clamps on a single plate. The small envelope supports more compact clamping arrays and can simplify CNC table layouts, contributing to higher machine utilisation and a neater, more ergonomic workstation. Precise adjustment with the M8 x 35 pressure screw Equipped with an M8 x 35 pressure screw, the clamp permits fine mechanical adjustment and consistent contact pressure. The standard thread size facilitates easy replacement or aftermarket upgrades and ensures compatibility with common tooling hardware. Repeatable adjustment helps maintain consistent clamping force across batches, decreasing inspection variance and improving throughput quality. Ready for integration and dependable supply Delivered as a single unit (packaging unit 1) and identified by SKU 4000604385NW, the pressure clamp is straightforward to specify in bills of materials and procurement lists. Sourcing through an experienced distributor provides the assurance of steady availability and quality control; Metav Werkzeuge combines warehouse logistics with a European quality filter to simplify procurement and sustain production continuity. For applications requiring dependable fixture clamping choose the AMF pushrod clamp No. 6845 and contact Metav Werkzeuge for stock information, technical advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000604385NW Type: 6845 Product: Pushrod clamp Execution: Pressure clamp Manufacturer: AMF Facts Max. clamping force: 4,000 N Size: 3 Pressure screw: M8 x 35 Packaging unit: 1 Special features Compact design for tight fixtures Repeatable mechanical adjustment via pressure screw Suitable for machining and assembly fixture use FAQ What clamping force does this clamp provide? The AMF pushrod clamp No. 6845 delivers a maximum clamping force of 4,000 N, offering secure retention for medium‑duty fixture applications. Is the pressure screw replaceable or standardised? Yes, the clamp uses a standard M8 x 35 pressure screw, which can be replaced with compatible M8 hardware if required. Can this clamp be integrated into compact fixture layouts? The Size 3 body is designed for space‑saving installation, allowing multiple clamps to be arranged on small plates or tight work areas. How is the product supplied for ordering and specification? The item is supplied as a single unit (packaging unit 1) and is listed under SKU 4000604385NW for straightforward procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pushrod Clamp Short Form With M6 Pressure Screw, 21.5mm Stroke, 1000N Holding Force - AMF
Take advantage of the compact short design and 1,000 N clamping capacity for dependable securing in confined fixtures; the 21.5 mm stroke and standard thread interfaces ensure straightforward integration. Order directly via Metav Werkzeuge or contact our consultants for application advice. AMF 6844 Rod Clamp (Size 2) — Short Design, 1,000 N Holding Force The AMF 6844 rod clamp (size 2, short version) is a compact clamping device designed for fixtures and jigs where space is restricted, offering a robust solution for repeatable positioning and holding. Short design for confined spaces 1,000 N clamping force 21.5 mm stroke for secure positioning Space-saving clamping that keeps workflows tight and accurate The short-configuration rod clamp is optimised for setups where clearance is limited. Thanks to its short design and size 2 form factor, the clamp can be mounted closer to the workpiece without obstructing tools or measurement probes. This compact layout reduces fixture height and simplifies stacking on multi-level jigs, resulting in a more ergonomic work envelope and less rework. The reduced footprint therefore supports faster part changes and a neater machine table. Predictable force and consistent hold for secure processing Engineered to deliver a maximum clamping force of 1,000 N, the device provides reliable retention during machining and assembly operations. The 21.5 mm stroke describes the effective travel of the pressure element; this travel range allows controlled contact and compensates for minor workpiece height variation. The pressure screw is specified as M6 x 25, providing a familiar adjustment interface that can be set and locked for repeatable pressure. Such characteristics translate into fewer rejects and improved process stability. Straightforward integration with standard threads and compact mounting Installation is facilitated by standardised threads and clear dimensional references: the clamp includes mounting interfaces compatible with M6 and M16x1.5 fittings and presents defined reference dimensions for alignment. These mechanical standards simplify retrofitting into existing jigs or new fixture designs and reduce the need for special adaptors. The short stroke combined with conventional thread sizes enables quick assembly, straightforward replacement and modest upkeep demands, supporting continuous production with minimal downtime. For robust, compact clamping choose the AMF 6844 — contact Metav Werkzeuge in Emmerich for availability and tailored integration advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4123665200NW Type: 6844 Label: Schubstangenspanner Nr.6844 Gr.2 kurz AMF Product type: Rod clamp Manufacturer: AMF Design: Short version Core data Maximum clamping force: 1,000 N Maximum holding force: 1,000 N Stroke (Hub): 21.5 mm Pressure screw: M6 x 25 A: 10 mm B: 36 mm E: 15 mm H1: 73 mm HW min.: 17 mm HW max.: 25 mm L1: 68.5 mm L2: 13 mm L3: 68 mm M: M6 M2: M16x1.5 N: 30.5 mm Packaging unit: 1 Special features Short design for confined applications Size: 2 Standard thread interfaces (M6, M16x1.5) Defined dimensional references for fixture integration Compact stroke for precise contact control FAQ What is the maximum clamping force of this rod clamp? The AMF 6844 rod clamp provides a maximum clamping force of 1,000 N, suitable for many light to medium-duty fixturing tasks. How much stroke does the clamp offer and what does that mean? The device offers a 21.5 mm stroke, which is the effective travel of the pressure element; this allows compensation for minor height differences and ensures controlled contact with the workpiece. Which threads are provided for mounting and adjustment? Mounting and adjustment use standard threads: the pressure screw is M6 x 25, and an additional mounting thread is M16x1.5, enabling easy integration into conventional jigs. Is the short design suitable for automated or multi-level fixtures? Yes, the short configuration of the clamp makes it particularly suitable for multi-level or automated fixtures where space above the workpiece is constrained. What dimensions are relevant for fixture planning? Key reference dimensions include A 10 mm, B 36 mm, H1 73 mm and N 30.5 mm; these should be used when designing the fixture to ensure proper alignment and clearance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Base Size 2 M6 Pressure Screw 2,000 N - AMF
Benefit from a compact, installation-friendly clamp that delivers a reliable 2,000 N holding force and a 26 mm stroke, combined with a secure M16×1.5 mounting thread; order the AMF push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application support. AMF Push‑Rod Clamp No. 6840, Size 2 — Compact 2,000 N Clamping Force The AMF Push‑Rod Clamp No. 6840, Size 2 is a compact clamping element designed for fixtures and jigs, supplied without an angled foot for flexible mounting positions. Compact Size 2 with 26 mm stroke Maximum clamping force 2,000 N M16×1.5 main thread for secure mounting Supplied without angled foot for flexible set-up Save space without sacrificing holding power The compact design of this clamp provides a small installation footprint while delivering a high holding force of 2,000 N. The 26 mm stroke allows reliable axial motion for controlled clamping and unclamping cycles, making it suitable for confined fixtures and automated cells. The short travel combined with a robust mechanical transmission supports repeatable clamping, reducing rework and increasing process stability in production environments. Fast integration and simple adjustment for production use Mounting is straightforward via the M16×1.5 main thread and the clamp features an M6×25 pressure screw for fine contact adjustment. These standard interfaces enable rapid integration into existing tool plates and bespoke fixturing, while the absence of an angled foot gives freedom in orientation and placement. The mechanical design aims for low maintenance and predictable behaviour during repetitive cycles, supporting smoother set‑up times and faster changeovers. Robust function that improves workflow and quality Engineered for fixture applications, the push‑rod design converts axial movement into secure clamping force with minimal play. The result is consistent clamping force and superior positional accuracy for workpieces during machining or assembly. For workshops and production departments that prioritise throughput and consistency, this clamping element helps shorten cycle times and supports higher first‑time‑right rates, contributing to an efficient and reliable production flow. For reliable fixture clamping with a proven 2,000 N holding force, contact Metav Werkzeuge for expert advice on the AMF push‑rod clamp No. 6840 — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 4000604393NW Type: 6840 Product: Push‑rod clamp No. 6840, Size 2 Manufacturer: AMF Packaging unit: 1 Facts Max clamping force: 2,000 N Max holding force: 2,000 N Stroke (Hub): 26 mm Pressure screw: M6×25 Main thread: M16×1.5 A: 10 mm B min: 20 mm; B max: 46 mm E: 20 mm; H1: 66 mm HW min: 17 mm; HW max: 25 mm L1: 114 mm; L2: 19 mm; L3: 105 mm N: 22 mm Special features Size: 2 Supplied without angled foot Type designation: 6840 Compact push‑rod clamping element FAQ What is the maximum clamping force of this clamp? The AMF push‑rod clamp No. 6840 provides a maximum clamping force of 2,000 N (SKU 4000604393NW). What stroke does the clamp offer and how does it affect use? The clamp features a 26 mm stroke, which gives controlled axial travel for secure contact and is well suited to compact fixtures where installation space is limited. How is the clamp mounted to a fixture plate? Mounting is by the M16×1.5 main thread; the clamp also includes an M6×25 pressure screw for contact adjustment to match component geometries. Can the clamp be used in automated systems? Yes, the mechanical push‑rod design and standard thread interfaces make this clamp suitable for integration into automated fixturing and pick‑and‑place systems where repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Base Size 3 M8x35 32mm Stroke 2500N Holding Force - AMF
Take advantage of robust 2,500 N clamping capacity and a 32 mm stroke for dependable workpiece retention in medium‑duty fixtures; the compact Size 3 design without an angled base keeps setups slim while allowing secure actuation via the M20x1.5 thread. Order the AMF Push‑rod Clamp No. 6840, Size 3 directly via Metav Werkzeuge or ask our consultants if needed. AMF Push‑rod Clamp No. 6840, Size 3 — 2,500 N clamping, 32 mm stroke The AMF Push‑rod Clamp No. 6840, Size 3 is a compact industrial clamp for secure, repeatable workpiece holding in fixtures and machining jigs, supplied without an angled base for flexible mounting. 2,500 N clamping force 32 mm stroke M20x1.5 threaded actuator Compact Size 3, no angled base Consistent clamping performance that improves cycle stability The push‑rod unit delivers a clamping force of 2,500 N, engineered to maintain secure contact during machining or assembly operations. High, repeatable holding values reduce the need for rechecks between cycles and therefore contribute to shorter overall process times. The linear actuator arrangement with a 32 mm stroke gives a practical travel range for typical fixture tolerances, ensuring consistent pressure application across varied workpiece heights and minimising setup adjustments. Space‑saving design for versatile fixture layouts A small footprint and the absence of an angled base allow the clamp to be integrated into confined jigs or banked fixture plates without compromise. The mechanical interface is prepared for a M20x1.5 threaded connection and includes a thrust screw of M8 x 35, enabling straightforward mechanical fixing and straightforward connection to existing tooling assemblies. The slim profile supports denser station layouts while retaining the mechanical integrity required in production environments. Low‑maintenance construction for reliable uptime Built for repetitive operation, the clamp’s mechanical principle emphasises durability and simple servicing. The robust construction minimises wear on moving parts and keeps maintenance intervals long, which supports predictable production planning. Where quick checks are required, readily measurable parameters such as stroke and thread engagement allow rapid visual inspection and straightforward corrective action without specialist tools. Practical applications and compatibility in workshop use Ideal for medium‑duty clamping tasks in metalworking fixtures, assembly jigs and test rigs, the unit adapts to a range of production tasks thanks to the adjustable working height (B min 24 mm – B max 56 mm) and a defined approach dimension (A 12 mm). The clamp suits repetitive positioning and holding duties where a reliable, mechanical solution is preferred over pneumatic variants, particularly when electrical or compressed‑air supplies are limited. Contact Metav Werkzeuge to discuss fitment options for the AMF Push‑rod Clamp No. 6840 and arrange tailored advice from our Emmerich team Technical data SKU: 4000604394NW Type: 6840 Product: Push‑rod clamp Variant: without angled base Brand: AMF Packing unit: 1 Core specifications Max clamping force: 2,500 N Max holding force: 2,500 N Stroke (Hub): 32 mm A: 12 mm B min: 24 mm B max: 56 mm E: 30 mm H1: 82.5 mm HW min: 22 mm HW max: 35 mm L1: 140 mm L2: 22 mm L3: 127 mm M2: M20x1.5 N: 27 mm Thrust screw: M8 x 35 Features & design Size: 3 Supplied without an angled base Compact footprint for tight fixtures Mechanical, repeatable clamping action Suited to fixture and machining setups FAQ What maximum force does this clamp provide? The AMF Push‑rod Clamp No. 6840 (Type 6840, SKU 4000604394NW) delivers a maximum clamping and holding force of 2,500 N, giving dependable retention for medium‑duty tasks. How much travel does the actuator offer and what is the usable height range? The unit features a 32 mm stroke and an adjustable working height range from 24 mm to 56 mm, making the clamp suitable for varied workpiece thicknesses in fixture assemblies. Is the clamp ready for direct mounting in a fixture plate? Yes, the Size 3 version is supplied without an angled base to allow direct mounting; the actuator thread is M20x1.5 with an M8 x 35 thrust screw for secure mechanical connection on fixture plates. Which production environments benefit most from this clamp? This mechanical push‑rod clamp is especially useful in machining jigs, assembly fixtures and test rigs where a compact, reliable clamp with predictable force and travel characteristics is required — the AMF 6840 is built to meet those needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Foot Size 1, M4 Pressure Screw, 20mm Stroke, 1,000 N Holding Force - AMF
Take advantage of the combination of compact installation length, a 20 mm stroke and a reliable 1,000 N holding force to secure workpieces consistently in fixtures; procure directly via Metav Werkzeuge or request application guidance from our consultants. Push-rod clamp No. 6840, Size 1 AMF — 20 mm stroke, 1,000 N holding force The Push-rod clamp No. 6840, Size 1 AMF is a compact mechanical clamping element for fixtures and jigging, designed to provide repeatable linear actuation and secure workpiece retention without an angled foot. 20 mm linear stroke Up to 1,000 N holding force M12×1.5 clamping thread Compact 91 mm installation length Reliable clamp power for steady production The compact actuator delivers a controlled 20 mm stroke combined with a maximum clamping force of 1,000 N, which means secure contact pressure for medium-duty machining and assembly operations. The mechanical design converts linear motion into consistent holding force, reducing slippage and rework in repetitive processes. Where cycle stability and predictable clamp behaviour matter, this clamping element offers a straightforward, robust solution that can be integrated into fixtures requiring repeatable actuation. Space-saving mounting and flexible positioning Designed without an angled foot, the clamp is optimised for tight layouts and direct mounting on plates and jigs. The short installation length (L1 91 mm) and compact head geometry allow close-packed arrangements on modular tooling. A standard M12×1.5 interface provides compatibility with common threaded adaptors, while the adjustable contact geometry (B min 17.5 mm to B max 37.5 mm) permits fine alignment of the clamping travel. The modest envelope supports efficient use of clamping stations where floor space and stack height are limited. Simple integration and practical adjustment features Mechanical simplicity is emphasised by the included M4 × 20 pressure screw and the clear dimensional references (A 8 mm; E 20 mm; H1 45.5 mm; HW min 12 mm / HW max 20 mm), which aid swift installation and set-up. The clamp's M12 external thread (M12×1.5) enables direct mounting or the use of adaptors; the push rod travel (hub 20 mm) is suited to both holding and light locating actions. The unit is supplied as size 1 and is compatible with common fixture components, making it easy to replace or expand clamping points while maintaining machine uptime. For tailored application advice or prompt supply from our Emmerich stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss integration options and availability. Technical data Article number: 4000604392NW Type: 6840 SKU: 4000604392NW Product type: Push-rod clamp Execution: without angled foot Packaging unit: 1 Numbers / Core technical data Stroke (hub): 20 mm Maximum pressing force: 1,000 N Maximum holding force: 1,000 N L1: 91 mm H1: 45.5 mm B min: 17.5 mm B max: 37.5 mm HW min: 12 mm HW max: 20 mm Designs / Special features Size: 1 Pressure screw: M4 × 20 Clamping thread: M12×1.5 A: 8 mm E: 20 mm L2: 16 mm L3: 74 mm N: 18 mm FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum holding and pressing force of 1,000 N in the specified configuration of the Push-rod clamp No. 6840, Size 1 AMF. How much linear travel does the push rod offer? The unit offers a 20 mm stroke, suitable for short travel positioning and reliable workpiece engagement. Is the clamp supplied with an angled foot? This model is supplied without an angled foot; the flat execution is intended for direct mounting on fixture plates. Which thread is used for mounting and connection? Mounting and clamping interfaces use an M12×1.5 thread; the pressure adjustment is performed via the included M4 × 20 screw. Can the clamp be used in compact, densely populated fixtures? Yes, the compact installation length (L1 91 mm) and reduced head profile make it suitable for close-packed fixture arrangements where space saving is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angled Base Size 5 4,500 N Thrust, M24x1.5 - AMF
Reliable hold and flexible setup are guaranteed by the combination of a 4,500 N clamping force, a 40 mm stroke and an adaptable clamping span, making the clamp ideal for demanding fixture tasks; order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp No. 6840, size 5 (AMF) — 4,500 N clamping force, 40 mm stroke A Push-rod clamp No. 6840, size 5 (AMF) for secure workpiece fixturing in machining and assembly, supplied without an angled foot. High clamping force 4,500 N Stroke 40 mm for secure engagement Adjustable span 26.5–66.5 mm Robust size 5 construction Stable clamping for accurate machining and repeatable results The 4,500 N clamping force and equal holding force 4,500 N ensure consistent retention of components under cutting or assembly loads. A 40 mm stroke provides sufficient travel for engaging irregular or offset workpieces while keeping the contact pattern predictable; this reduces rework and rejects. In practice, the clamp’s performance is translated into fewer adjustments during a production run and improved process reliability. The compact footprint and clear mechanical parameters make integration into existing fixtures straightforward, supporting efficient cycle times and reproducible set-ups. Flexible adjustment that speeds up setup and adapts to parts Designed for adaptable mounting and quick adjustment, the device features an adjustable span 26.5–66.5 mm and a pressure screw M12 x 50 for fine positioning. The main mounting thread M24 x 1.5 allows standardised installation in fixtures and subplates. Key dimensions such as A 16 mm, E 50 mm and H1 99 mm are provided for accurate planning of clamp positions and clearances. Because these values are defined, engineering drawings and jigs can be prepared in advance, shortening set-up times. The unit is supplied without an angled foot, offering freedom to mount on custom brackets or directly into modular tooling systems. Robust design for workshop use and consistent throughput Built as a size 5 clamp with clearly specified limits (HW 30–50 mm, B 26.5–66.5 mm), the component is geared towards industrial applications where repeatability and serviceability matter. The combination of standardised threads and measurable lengths (L1 171.5 mm, L3 158 mm, N 34.5 mm) makes the clamp compatible with common fixture architectures, enabling long-term use with predictable maintenance intervals. Where durable mechanical performance is required, the rated forces and stroke translate into fewer interventions and steady production quality, supporting continuous operation in busy workshops. Contact Metav Werkzeuge for application advice and to secure the AMF Push-rod clamp No. 6840 (SKU 4000604395NW) for reliable fixture performance Technical data Article number: 4000604395NW Product type: Push-rod clamp No. 6840 Brand: AMF Packaging unit: 1 Execution: without angled foot Facts Max. clamping force: 4,500 N Max. holding force: 4,500 N Stroke: 40 mm Pressure screw: M12 x 50 Mounting thread: M24 x 1.5 A: 16 mm B min: 26.5 mm B max: 66.5 mm E: 50 mm H1: 99 mm HW min: 30 mm HW max: 50 mm L1: 171.5 mm L2: 25 mm L3: 158 mm N: 34.5 mm Special features Size: 5 Compact industrial clamp for fixtures Supplied without angled foot Standardised threads for easy mounting Suitable for machining and assembly fixtures FAQ How much clamping force does the clamp provide? The clamp provides a rated clamping force and holding force of 4,500 N for the AMF Push-rod clamp No. 6840 (SKU 4000604395NW), suitable for many machining and assembly applications. What stroke and adjustment range are available? The unit features a 40 mm stroke and an adjustable span from 26.5 mm to 66.5 mm, enabling engagement of parts with varying heights and offsets. Which threads are used for mounting and pressure adjustment? Mounting is effected via an M24 x 1.5 thread and the pressure adjustment uses an M12 x 50 screw, both of which are industry-standard sizes for fixture integration. Is the clamp supplied with an angled foot? No, the clamp is supplied without an angled foot, allowing direct mounting to custom brackets or integration into modular tooling plates. Can the clamp be used in automated fixtures? Yes, the defined forces, stroke and mounting threads make this clamp suitable for automated and semi-automated fixturing systems where mechanical repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
181mm Push Rod Clamp 15 With Automatic Jaw Adjustment 1100N - BESSEY
The BESSEY push-rod clamp combines automatic width adjustment with a reliable 1,100 N clamping capacity, offering fast set-up and secure holding in compact workshop settings; order the clamp directly via Metav Werkzeuge or consult the specialists for application support. BESSEY Push-rod Clamp, Size 15 — automatic width adjustment, 1,100 N The BESSEY Push-rod Clamp, Size 15 is a compact clamping device for workshop and maintenance tasks, featuring automatic clamping-width adjustment for fast, repeatable positioning. Automatic clamping-width adjustment Max. clamping force 1,100 N Compact 181 × 42 × 32 mm footprint Size 15 for light workshop applications Faster set-up through automatic width adjustment The automatic width adjustment shortens set-up time by adapting the clamping head to the workpiece without manual reconfiguration. This mechanism reduces handling steps and minimises fixture changes, enabling quick setup across varying part sizes. The simple adjustment principle is particularly useful where repeated repositioning would otherwise slow down production or maintenance routines. The reduced set-up overhead supports a steadier workflow and fewer interruptions on the shop floor. Consistent holding force for reliable results A rated 1,100 N maximum clamping force ensures a stable grip for many routine clamping operations, offering consistent pressure across repeated cycles. Expressed in newtons, this figure describes the mechanical pushing capability of the device and is a practical reference when comparing clamps for comparable tasks. The even force distribution provided by the mechanism helps to maintain part alignment during assembly or gluing operations, reducing the risk of slippage and rework. Compact design for confined workspaces With compact dimensions of 181 × 42 × 32 mm, the clamp is designed to fit tight fixtures and limited bench space without compromising accessibility. Its modest footprint makes it straightforward to incorporate into existing jigs or temporary setups. The size 15 designation denotes the device’s suitability for lighter-duty applications where space is at a premium, while still providing a professional-grade clamping solution for routine workshop and maintenance tasks. Seamless procurement and dependable supply chain Integration of this clamp into an assembly or maintenance toolkit is supported by Metav’s focused distribution and technical advisory from Emmerich. The product’s straightforward specification and single-item packaging unit simplify purchasing and storage decisions. As a partner for precision tools, Metav combines wide selection with hands-on advice, enabling informed choices and dependable supply for workshop managers and procurement teams. The combination of practical design and distribution reliability supports efficient workshop operation without unnecessary complexity. For procurement or application advice on the BESSEY Push-rod Clamp, Size 15, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 4000831138NW Article: BESSEY Push-rod Clamp, Size 15 Manufacturer: BESSEY Facts Max. clamping force: 1,100 N Length: 181 mm Width: 42 mm Height: 32 mm Special features Automatic clamping-width adjustment Size: 15 Product type: Push-rod clamp Packaging unit: 1 FAQ What is the maximum clamping force of the clamp? The clamp offers a maximum clamping force of 1,100 N as specified for the BESSEY Push-rod Clamp, Size 15 (SKU 4000831138NW). What are the external dimensions of the clamp? The device measures 181 mm in length, 42 mm in width and 32 mm in height. Does the clamping width adjust manually or automatically? The clamping width is adjusted automatically; the mechanism adapts to different workpiece sizes for quicker set-up. How is the product supplied? The clamp is supplied as a single unit (packaging unit: 1). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Pushrod Clamp Size 1 Small Angle Foot M4x20 Actuating Screw 1000N - AMF
Take advantage of the compact design and 1,000 N holding force together with a 20 mm stroke for reliable, repeatable clamping in confined fixtures; order the AMF push-rod clamp directly via Metav Werkzeuge or ask our consultants for application support. Push-rod clamp No. 6841, size 1, small angled foot (AMF) — compact clamping with 1,000 N holding force The Push-rod clamp No. 6841, size 1, small angled foot (AMF) is a compact clamping element for fixture and workholding tasks where space is restricted and reliable repeatability is required Holding force 1,000 N 20 mm stroke Small angled foot design M12x1.5 mounting thread Secure clamping in tight spaces for higher throughput The compact construction delivers a holding force of 1,000 N and a 20 mm stroke, making this clamp suitable for light to medium fixture tasks where secure retention is essential. The small angled foot reduces the required footprint on the workpiece and fixture plate, enabling effective clamping close to edges or in stacked tooling plates. By converting linear actuation into consistent lateral pressure, this unit supports faster part changeovers and reduced secondary handling, which contributes directly to improved cycle efficiency and less downtime. Simple mounting and predictable repeatability for production use Equipped with a M12x1.5 mounting thread and an M4 x 20 pressure screw, the design facilitates straightforward integration into existing fixtures. Adjustable travel and clear mechanical limits ensure repeatable positioning, while the specified M min./M max. dimensions allow precise alignment during setup. The straightforward mechanical principle requires no electronics or complex maintenance, so installation and routine checks remain fast and cost-effective. For workshop planners, the clamp’s compactness and standardised interfaces simplify stocking and reduce fixture complexity. Robust, low-complexity design supporting workshop reliability A pragmatic, low-complexity construction provides the benefit of consistent performance without elaborate servicing routines. The angled foot geometry offers stable contact and helps to distribute clamping loads evenly, reducing localised wear on the part and clamp. Where repeatability and dependability are priorities, this clamp offers a pragmatic balance between force and form factor. Combined with Metav’s supply chain reliability, the component is a practical choice for assembly jigs, machining fixtures and inspection setups that demand dependable clamping with minimal fuss. Contact Metav Werkzeuge for detailed mounting guidance or to request the AMF push-rod clamp No. 6841 for compact, repeatable clamping — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com; local stock and rapid dispatch from Emmerich ensures reliable delivery Technical Data Article number: 4000833516NW Type: 6841 Product: Push-rod clamp Manufacturer: AMF Packaging unit: 1 Max. clamping/holding force: 1,000 N Numbers / Core technical data Stroke (Hub): 20 mm A: 8 mm B min.: 24.5 mm B max.: 44.5 mm D: 4.5 mm E: 20 mm H: 15 mm H1: 60.5 mm K: 7 mm L1: 91 mm L2: 16 mm M min.: 16 mm M max.: 19.5 mm M2: M12x1.5 N: 30 mm P: 20 mm Designs / Special features Small angled foot Pressure screw M4 x 20 Size: 1 Compact fixture footprint Mechanical actuation, no electronics FAQ What is the maximum holding force of the clamp? The clamp provides a maximum holding force of 1,000 N for secure retention in fixture applications. Which thread is used for mounting the clamp in a fixture? Mounting is via an M12x1.5 thread as specified for the unit. Can the clamp be used where space is limited? Yes, the small angled foot and compact size make the clamp particularly suitable for tight or edge-adjacent clamping positions. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
233mm Push Rod Clamp Automatic Jaw Adjustment 2,500N - BESSEY
Take advantage of a compact, workshop-ready clamp that combines automatic span adjustment with a reliable 2,500 N maximum clamping force to speed up assembly and secure workpieces consistently; order the BESSEY solution directly via Metav Werkzeuge or ask the consultants for advice. BESSEY bar clamp, size 25 — automatic span adjustment, 2,500 N clamping force BESSEY bar clamp, size 25 for quick-span adjustments in workshop and assembly environments, designed for medium-duty holding tasks Automatic span adjustment 2,500 N maximum clamping force Overall length 233 mm Size 25 for medium-duty tasks Consistent clamping performance for assembly and repair The automatic span adjustment reduces set-up cycles by aligning the jaws to the workpiece instantly, while the specified 2,500 N rating denotes the maximum axial holding capacity under normal working conditions. For practical purposes, 2,500 N corresponds to a firm hold on glued joints, light fabrication and many repair tasks where stable pressure is required. This combination of fast adjustment and defined clamping force supports repeatable results and helps maintain production throughput in small workshops and repair bays. Compact footprint for tight working conditions Designed with an overall length of 233 mm, a width of 60 mm and a height of 46 mm, the clamp is intended for situations where accessibility is limited. The modest dimensions enable secure clamping in confined fixtures and on narrow workpieces without obstructing surrounding tooling. The compact format also simplifies storage and handling in crowded toolkits while retaining sufficient reach for standard medium-duty operations. Faster setup and dependable handling The automatic adjustment mechanism shortens setup time and reduces the number of manual operations needed during repetitive tasks, making the clamp a practical choice for batch work and frequent repositioning. Marked as Size 25, the tool targets medium-duty applications where rapid, reliable holding is more important than very large span capacity. Supplied as a single unit, the clamp integrates smoothly into routine workflows and is suitable for use at workbenches, in maintenance shops and on-site assemblies. Contact Metav Werkzeuge to discuss availability or to request tailored technical advice for integrating the BESSEY bar clamp, size 25, into current workflows. Technical data Article number: 4123716102NW Label: Schubstangenspanner Gr.25 BESSEY Manufacturer: BESSEY Product type: Bar clamp (Schubstangenspanner) Packaging unit: 1 Facts Overall length: 233 mm Width: 60 mm Height: 46 mm Maximum clamping force: 2,500 N Size designation: 25 Special features Automatic span adjustment Medium-duty application SKU / UID: 4123716102NW FAQ What does the automatic span adjustment do? The automatic span adjustment ensures the jaws align with the workpiece quickly, reducing set-up time and enabling consistent clamping pressure with the BESSEY bar clamp, size 25 (SKU 4123716102NW). What level of work is suitable for a 2,500 N clamping force? A maximum clamping force of 2,500 N is suitable for medium-duty workshop tasks such as assembly, gluing and light fabrication where a firm, repeatable hold is required. Can the clamp reach into narrow fixtures? Yes; with an overall length of 233 mm and a compact profile, the clamp is designed to access confined spaces and narrow workpieces typical in repair and maintenance settings. Is the clamp supplied ready for immediate use? The tool is supplied as a single unit (packaging unit 1) and is ready for installation into standard workshop routines for medium-duty clamping tasks. How is the size designation relevant to selection? The Size 25 marking indicates the clamp’s intended application class—appropriate for medium-duty operations where quick adjustment and reliable holding are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Short Striking Rod Clamp Size 3, M8 x 35 Actuator, 2.5 kN Holding Force - AMF
Take advantage of a compact, short-bodied clamping solution that combines a 2500 N clamping force with a 40 mm stroke for reliable fixture in restricted spaces; order directly via Metav Werkzeuge or ask our consultants for compatibility advice. AMF Pushrod clamp No. 6844 (Size 3) — short design, 2500 N clamping force AMF Pushrod clamp No. 6844 is a compact pushrod clamp designed for reliable clamping in confined machine and assembly environments Short design for compact installations Push force up to 2500 N 40 mm stroke for secure engagement Actuation screw M8 x 35 Minimise setup time with compact, powerful clamping The compact short design delivers a high clamping force in a small envelope, making it suitable for fixtures where space is at a premium. With a maximum holding and pressing force of 2500 N and a 40 mm stroke, this clamp enables fast, repeatable locking of workpieces while reducing interference with adjacent tooling. The combination of high force and reduced footprint helps to maintain production flow and reduce cycle interruptions without sacrificing grip strength. Straightforward integration and clear technical interfaces Designed for easy assembly into existing fixtures, the clamping unit features an M8 x 35 actuation screw and an M20x1.5 thread for secure mounting. Key dimensions such as H1 123 mm, L1 108 mm, A 12 mm and B 57 mm provide predictable clearances for layout planning. The plunger stroke and mounting threads are specified to industry conventions, which simplifies retrofitting and minimises engineering time. For less experienced users, this clear specification set reduces uncertainty during installation and commissioning. Reliable performance in repetitive production environments Built for repeated cycles, the device shows consistent holding characteristics suitable for assembly, jigs and light machining tasks. The robust actuation geometry and defined HW range 22–35 mm ensure secure contact and predictable behaviour under load. Where process stability is essential, this clamp contributes to lower scrap rates and improved throughput thanks to predictable positioning and dependable engagement. The product’s mechanical simplicity supports ease of maintenance and long service intervals. For sourcing, technical match or delivery from Emmerich, contact Metav Werkzeuge—our consultants will advise on application fit and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4123665300NW Type: 6844 Product name: AMF Pushrod clamp No. 6844 Size 3 short Brand: AMF Packaging unit: 1 Facts Maximum pressing force: 2500 N Maximum holding force: 2500 N Stroke (Hub): 40 mm H1: 123 mm L1: 108 mm L3: 115 mm A: 12 mm B: 57 mm E: 25 mm HW min.: 22 mm HW max.: 35 mm L2: 16 mm N: 33 mm Actuation screw: M8 x 35 Thread M2: M20x1,5 Special features Short form construction for tight spaces Actuation via M8 x 35 screw Defined mounting and interface dimensions for simple integration Suitable for fixtures, jigs and assembly applications FAQ What is the maximum clamping force of the AMF Pushrod clamp No. 6844? The maximum pressing and holding force of the AMF Pushrod clamp No. 6844 (SKU 4123665300NW) is 2500 N. Which stroke length does this clamp offer and how does it affect application? The unit provides a 40 mm stroke, which allows for secure engagement with variable workpiece heights while maintaining a compact assembly footprint. What mounting interfaces are available for integration? The clamp uses an M8 x 35 actuation screw and includes an M20x1.5 threaded interface for mounting and actuation connection, simplifying integration into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Push Rod Clamp Heavy Duty Tension/Compression Clamp 25kN Holding Force - AMF
Combine heavy‑duty size 7 construction, 25,000 N clamping capacity and a 50 mm stroke for reliable, repeatable fixture clamping; order the AMF push‑pull rod clamp directly via Metav Werkzeuge or consult our specialists for application support. AMF Push‑pull Rod Clamp Nr.6842, Size 7 (Heavy‑duty) — 25,000 N, 50 mm stroke The AMF Push‑pull Rod Clamp Nr.6842 is a heavy‑duty compression and tension clamp intended for industrial workholding and fixture applications where high holding forces and repeatable positioning are essential Heavy‑duty push/pull clamp, size 7 25,000 N maximum clamping force 50 mm stroke for deep engagement M12 x 50 pressure screw fitted Secure, high‑force clamping for repeatable production With a rated max. clamping force of 25,000 N and equal holding capacity, this rod clamp provides a measurable increase in fixture security compared with lighter devices. The combination of high force and 50 mm stroke reduces slippage under machining loads and improves repeatability of parts from batch to batch. Designed for demanding production environments, the unit supports stable machining, drilling and light milling operations by keeping components immobile during cycle times. Emphasis on measurable figures simplifies planning and risk assessment in process documentation. Fast adjustment and straightforward integration into jigs The clamp offers practical adjustability via an M12 x 50 pressure screw and a compact footprint in size 7, enabling simple setting of contact pressure and travel without complex tooling changes. Minimum and maximum flank dimensions (B min / B max) permit flexible positioning in bespoke fixtures; this reduces set‑up time and shortens changeover intervals. The mechanical interface is suitable for standard locating schemes, allowing rapid retrofit into existing clamping plates or custom jigs while preserving machine availability and throughput. Built for continuous shopfloor use — confidence in every cycle Specified as a heavy execution, the design prioritises durability under repeated load cycles. The robust mechanism and conservative force rating contribute to lower maintenance frequency and predictable service intervals, which translates into fewer unscheduled stops and a steadier production rhythm. For manufacturing teams, this reliability means less rework and improved delivery predictability, building operational confidence that supports long‑term production planning. Practical selection notes to match process requirements Selection should be guided by the required holding force and stroke rather than by brand alone; the 25,000 N rating and 50 mm travel make this clamp suitable where strong retention and moderate travel are required. Key dimensions such as A, C, H1 and L1 allow verification against fixture envelopes before purchase. If uncertainty remains over compatibility with a particular jig or machining sequence, technical consultation is recommended to ensure the clamp meets cycle, load and access constraints. For robust, high‑force clamping choose the AMF Nr.6842 — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4123680170NW Type: 6842 Brand: AMF Product: Push‑pull rod clamp (Schubstangenspanner) Nr.6842, size 7 Execution: heavy Packaging unit: 1 Facts Max. pressing force: 25,000 N Max. holding force: 25,000 N Stroke: 50 mm Pressure screw: M12 x 50 A: 22 mm B min: 59 mm B max: 105 mm C: 70 mm D: 11 mm E: 50 mm H: 55 mm H1: 179 mm K: 45 mm L1: 218 mm M min: 57 mm M max: 65 mm N: 93 mm P: 158 mm Special features Heavy execution for industrial use Compression and tension (push/pull) function Size 7 for compact fixtures M12 x 50 adjustable pressure screw Suitable for repeatable clamping tasks Single‑unit packaging FAQ What is the maximum clamping force of this clamp? The AMF Push‑pull Rod Clamp Nr.6842 provides a maximum clamping and holding force of 25,000 N. What stroke length does the clamp offer? The clamp has a 50 mm stroke, enabling deeper engagement and compensation for part variation. Is the clamp suitable for both compression and tension applications? Yes — the device is specified as a compression/tension (push/pull) clamp and is intended for both holding and pressing tasks. How is clamping pressure adjusted? Adjustment is via an M12 x 50 pressure screw and by setting the available travel within the B min/B max range to suit the fixture geometry. Which size is this clamp and how compact is it for fixtures? This is a size 7 unit with compact external dimensions such as L1 = 218 mm and A = 22 mm, designed for integration into space‑constrained jigs Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
67mm Rod Clamping Plunger Short Version Size 5, 4,000 N Holding Force - AMF
Data inconsistency: the product data lists the manufacturer as "AMF", but this name does not appear in the provided manufacturer directory. Because a matching manufacturer entry is mandatory for the final product text (the manufacturer and responsible party must be cited from the supplied list), a complete product description cannot be generated from the available information. Please supply either a corrected manufacturer name that matches one of the entries in the given directory or provide the full, verifiable manufacturer and responsible-party details for "AMF" so the specification can be completed. Once the manufacturer information is aligned with the directory, a full British English product description, technical data and FAQ will be produced in the required format.
Schubstangenspanner Gr.25 1xSTC-IHH25+1xSTC-SET-T20 BESSEY
zum Einsatz auf Multifunktionstischen wie z.B. Festool MFT und Sortimo WorkMo mit Lochdurchmesser 20 mm und Plattenstärke von min. 19 mm bis max. 25 mm Weitere technische Eigenschaften: · Ausstattung: 1 x STC-IHH25 + 1 x STC-SET-T20
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com