190mm Switchable Permanent Magnet 110x110mm Holding Surface 12kg Capacity - TECWERK
Take advantage of the combination of a switchable magnetic function, a compact 110 x 110 mm holding surface and reliable 12 kg lifting capacity for faster set-ups and repeatable positioning—order directly via Metav Werkzeuge or consult the team for application advice. Permanent magnet L110 x 110 x 190 mm, switchable – TECWERK magnetic lifter with 110 x 110 mm holding face and 12 kg capacity Permanent magnet L110 x 110 x 190 mm is a compact, switchable magnetic lifter designed for secure holding and simple on/off operation in metalworking and assembly applications. Switchable magnetic operation for fast clamping Holding surface 110 x 110 mm Max lifting capacity 12 kg Compact height 190 mm, portable at 2.4 kg Faster set-ups with mechanically switchable magnetic holding A switchable magnet removes the need for repeated mechanical clamping when processing small steel parts. The mechanical on/off mechanism delivers immediate activation and reliable release without tools or power supply, which speeds repetitive tasks and reduces cycle times. With a defined holding surface of 110 x 110 mm and a clear maximum lifting capacity of 12 kg, the device offers predictable performance for fixturing, positioning and light lifting tasks. This predictability increases throughput and reduces set-up errors in routine production steps. Compact form factor for tight workspaces and portable handling The compact overall height of 190 mm and a mass of 2.4 kg make the tool simple to manoeuvre and store between operations. A small footprint combined with a flat 110 x 110 mm contact face supports accurate placement on flat ferrous components and holds pieces steadily during drilling, tapping or assembly work. The lightweight design encourages ergonomic handling while still providing a secure magnetic interface, enabling rapid repositioning on benches, fixtures and jigs. Safe, energy-free operation that integrates into workshop workflows The purely mechanical switching function provides energy-free operation, eliminating reliance on batteries or mains power and reducing maintenance points. The magnet’s on/off control improves safety during part loading and unloading: magnets can be deactivated for removal and reactivated for subsequent process steps. For workshop integration, the device supports common manual and semi-automated workflows where reliable magnetic holding of ferrous materials is required, contributing to smoother work sequences and lower operator effort. Durable, low-maintenance solution for routine use Designed for straightforward handling rather than complex maintenance, the unit delivers long service life through simple mechanics rather than electronic complexity. The absence of electrical components minimises downtime and inspection requirements, providing a practical holding tool for everyday tasks. Combined with an intuitive on/off control and standardised contact dimensions, the product supports efficient stock management and predictable replacement cycles in busy production or repair environments. For reliable magnetic lifting from TECWERK, contact Metav Werkzeuge in Emmerich for tailored advice and secure procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000832303NW Product type: Permanent magnet Version: switchable Packaging unit: 1 Manufacturer: TECWERK Facts Total height: 190 mm Holding surface: 110 x 110 mm Maximum lifting capacity: 12 kg Weight: 2.4 kg Special features Switchable magnetic function (mechanical on/off) Compact footprint for limited space Energy-free operation Suitable for holding ferrous materials FAQ What is the maximum lifting capacity of this magnetic lifter? The Permanent magnet L110 x 110 x 190 mm has a maximum lifting capacity of 12 kg. How is the magnet switched on and off? The unit uses a mechanical switchable mechanism that activates and deactivates the magnetic field without power. Which materials can be held with this magnet? The device is intended for ferrous materials; non-ferrous metals such as aluminium will not be attracted. What are the key dimensions of the product? The lifter offers a holding face of 110 x 110 mm and a total height of 190 mm. Is the product portable for bench work? Yes, the compact design and weight of 2.4 kg make it suitable for portable use on workbenches and in small workshops. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
190mm Switchable Permanent Magnet 80x80mm Holding Surface 7kg Capacity - TECWERK
Take advantage of a switchable device with an 80 x 80 mm holding face and a compact footprint to speed handling of small ferrous parts; the magnetic on/off function and a 7 kg maximum lifting capacity ensure efficient, safe temporary clamping. Order the unit directly via Metav Werkzeuge or consult their specialists for application advice. TECWERK Switchable Permanent Magnet — 80 x 80 mm holding face, 7 kg capacity The TECWERK switchable permanent magnet provides temporary magnetic holding and lifting for small workshop and assembly tasks, combining controlled magnetic release with a compact form factor. Switchable on/off magnet Holding face 80 x 80 mm Max lifting capacity 7 kg Compact total height 190 mm Faster, more reliable temporary holding for small components The switchable mechanism provides immediate magnetic engagement and safe release without tools, reducing handling time and minimising the risk of part damage during repositioning. With a holding face of 80 x 80 mm and a rated 7 kg lifting capacity, the device is suited for a wide range of light assembly, trimming and positioning operations where controlled magnetic clamping improves throughput. The design supports repeatable placement, which helps maintain consistent process quality and reduces rework. Compact dimensions that optimise workstation layout A compact total height of 190 mm and a low mass of 1.4 kg make this unit easy to position and relocate across workbenches and fixtures, supporting flexible production setups. The reduced size allows integration into tight jigs and fixturing scenarios where space is limited, while the modest weight aids manual handling and ergonomic operation. The compact profile therefore contributes directly to smoother workflows and faster changeovers in small-batch or mixed-production environments. Durable function and uncomplicated operation for everyday use Built as a practical workshop tool, the permanent magnet delivers consistent magnetic holding with a simple on/off control that requires no external power source, lowering operating complexity. The robust form supports routine use in assembly and light fabrication contexts, and the straightforward switching reduces training requirements for staff. The combination of reliability and simplicity helps to maintain production continuity and supports measurable efficiency gains in repetitive holding tasks. For enquiries about the TECWERK switchable permanent magnet or to place an order through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast supply. Technical Data Article number: 4000832302NW Product type: Permanent magnet Manufacturer: TECWERK Execution: switchable Facts Holding face: 80 x 80 mm Total height: 190 mm Weight: 1.4 kg Max lifting capacity: 7 kg Special features Switchable magnetic operation Compact design for small components Suitable for temporary clamping and lifting FAQ What is the maximum lifting capacity of this switchable unit? The TECWERK switchable permanent magnet (SKU 4000832302NW) has a maximum lifting capacity of 7 kg when applied on a suitable ferrous surface under recommended conditions. Which surface area provides the rated holding force? The rated holding force is specified for a flat 80 x 80 mm holding face; optimal contact between the magnet face and the part improves performance. Is any power source required to operate the magnetic switch? No external power is required; the magnetic on/off control is mechanical, enabling engagement and release without electricity. Can the magnet be used for positioning during light machining? Yes, the compact design and reliable magnetic holding make it appropriate for positioning and temporary clamping during light machining and assembly tasks. How portable is the device for use at different workstations? With a total height of 190 mm and a weight of 1.4 kg, the unit is lightweight and easy to move between workstations for flexible use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com