250mm Chip Guard Shield Arm 350mm, Plastic - LOC-LINE
Reliable protection for the machining zone is provided by a compact chip guard with a 190 x 250 mm shield and a 350 mm arm for extended reach; benefit from straightforward replacement and simple integration into existing LOC-LINE installations by ordering via Metav Werkzeuge or consulting the Metav team for fitment advice. LOC-LINE Chip Guard Shield 190 x 250 mm with 350 mm Arm A LOC-LINE chip guard shield designed for chip and coolant control on machine tools and CNC workstations. Chip guard 190 x 250 mm 350 mm arm length for extended reach Compatible with LOC-LINE modular fittings Supplied as single unit Robust protection for the machining zone without compromise The compact chip guard provides a targeted barrier that limits splash and swarf spread around the cutting area, reducing cleaning intervals and protecting surrounding fixtures. With a shield footprint of 190 x 250 mm, the device concentrates containment where it matters most while maintaining a low profile that avoids interference with tooling and workpiece access. The containment effect supports cleaner benches and reduces part rework associated with stray debris. Precise positioning enabled by the 350 mm arm A 350 mm arm delivers the necessary reach for many common machining setups and can be routed to avoid tool paths while keeping the shield in the optimal position. The mounting system is compatible with LOC-LINE modular fittings, which enables quick alignment and repeatable placement. This arrangement improves process reliability because the guard remains stable during machining, helping to preserve tool life and reduce unplanned downtime. Easy replacement and workshop integration for efficient workflows Supplied as a single unit, the component is intended for swift replacement during maintenance or reconfiguration, minimising machine idle time. Integration into standard LOC-LINE layouts is straightforward, allowing retrofit to existing coolant hoses and modular supports. The practical format supports lean workshop routines: fewer adjustments, faster serviceability and consistent protection across shifts. Practical advantages for procurement and operations The compact design and established LOC-LINE interface reduce the need for bespoke mounts, streamlining spare-part lists and procurement. The shield's geometry focuses containment without obstructing operator sight lines or access, improving operator confidence at the machine. Where a documented back-up strategy is required, the simple specification and clear dimensions assist in planning and inventory control. Contact Metav Werkzeuge to arrange supply of the LOC-LINE chip guard with 350 mm arm and confirm fitment for specific machines or to request technical clarification Technical data Article number: 4000833453NW Product: Chip guard shield (LOC-LINE) Packaging unit: 1 Facts Shield dimensions: 190 x 250 mm Arm length: 350 mm SKU: 4000833453NW Special features Brand: LOC-LINE Product type: Chip guard shield Supplied as single unit FAQ What machines is the chip guard suitable for? The LOC-LINE chip guard shield is suitable for machine tools and CNC workstations where a compact 190 x 250 mm shield and 350 mm arm provide effective coverage without obstructing tool access. How is the shield mounted and positioned? Mounting is via the LOC-LINE interface; the 350 mm arm allows flexible positioning and repeatable placement of the chip guard shield to direct chips and coolant away from critical areas. Is the material specified for the shield? Material details are not provided in the available data for the LOC-LINE chip guard shield (SKU 4000833453NW); please consult Metav Werkzeuge for material confirmation if required for specific applications. Can the shield be replaced quickly during maintenance? Yes, the chip guard shield is supplied as a single unit to enable rapid replacement and minimise machine downtime. Does the product include additional mounting hardware? The supplied data lists the chip guard shield and arm length; further mounting accessories should be checked with Metav Werkzeuge to ensure compatibility with the existing LOC-LINE layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 x 305 Chip Guard Shield Arm 350mm, Metal Mount - LOC-LINE
Take advantage of a compact 215 x 305 mm swarf shield mounted on a 350 mm arm for precise chip containment and reduced machine housekeeping. The combination of targeted protection and a generous reach supports uninterrupted machining cycles. Order the component directly via Metav Werkzeuge or consult the Metav team for application guidance. LOC-LINE swarf shield 215 x 305 mm with 350 mm arm LOC-LINE swarf shield 215 x 305 mm with 350 mm arm offers a focused chip barrier for machine-tool environments, combining a compact shield area with an extended mounting arm for flexible positioning. 215 x 305 mm compact swarf shield 350 mm arm length for extended reach LOC-LINE system component Reduce machine downtime with precise chip containment A correctly sized chip guard minimises the spread of swarf and coolant around the machine, which in turn reduces cleaning intervals and potential wear on ancillary components. The 215 x 305 mm shield delivers a defined protective area that is particularly effective for localised chip streams. Fitted on an arm with 350 mm reach, the unit enables close placement to the cutting zone without obstructing tool access, helping to maintain production flow and lower indirect maintenance costs. Flexible mounting for varied machining tasks The articulated mounting arrangement permits targeted positioning at different angles and distances from the workpiece, making the shield suitable for diverse machining operations on lathes, milling machines and small production centres. As a LOC-LINE system component, the guard integrates with modular mounting solutions commonly used in workshops, permitting fast reconfiguration when part geometries change. This adaptability supports both repeat production runs and one-off jobs where setup speed is essential. Cleaner, safer workplaces and straightforward integration Beyond visible cleanliness, a localised shield contributes to operator safety by keeping sharp swarf and splashing coolant away from access points and control panels. The device supports common workshop hygiene practices and helps to create a more orderly working environment. Installation requires only basic alignment on the chosen mounting point; the specification identifies the shield area and arm reach for planning purposes and compatibility checks with existing fixtures. Contact Metav Werkzeuge for tailored advice on sourcing the LOC-LINE swarf shield with 350 mm arm and to confirm suitability for specific machines or setups Technical data Article number: 4000833454NW Label: Späneschutzschild 215x305mm Arm-L.350mm LOC-LINE Manufacturer: LOC-LINE Product type: Swarf shield Packaging unit: 1 UID: 4000833454NW Dimensions & reach Shield size: 215 x 305 mm Arm length: 350 mm Features & materials Brand: LOC-LINE System compatibility: LOC-LINE components FAQ What size protective area does the shield provide? The shield offers a protective area of 215 x 305 mm, delivering a compact barrier suitable for localised chip streams. Can the arm reach be adjusted for different setups? The product includes an arm with a 350 mm reach that allows positioning at varying distances from the cutting zone for flexible placement. Is this component compatible with modular LOC-LINE fittings? Yes, the unit is designed as a LOC-LINE system component and integrates with common LOC-LINE mounting solutions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com