12mm T-Slot Clamping Screw Set M12 38-Piece Heat-Treated, Strength Class 8/10 - AMF
Take advantage of a robust combination of M12 thread compatibility, 12 mm T-slot fit and hardened components to ensure reliable clamping under repeated load; order the set directly via Metav Werkzeuge or consult the sales team for technical matching. AMF clamping screw set Nr. 6520 – 38-piece M12 set for 12 mm T-slots The AMF clamping screw set Nr. 6520 is a machine-table workholding kit designed for secure clamping in 12 mm T-slots on fixtures and milling tables. For 12 mm T-slots M12 threaded components All parts quenched and tempered Supplied in wooden case with hinged lid Secure clamping where it matters The set is engineered for dependable workholding on machine tables and modular fixtures. With M12 threads matched to a 12 mm T-slot, the kit provides consistent preload and repeatable positioning for medium to heavy machining tasks. The combination of standardised thread size and slot compatibility reduces set-up time and minimises the need for bespoke fasteners, supporting faster changeovers and steadier machining cycles. Built for high load and longevity All components are quenched and tempered, offering improved fatigue resistance and dimensional stability during repeated tightening cycles. The inclusion of strength class 8 and 10 parts means the hardware can tolerate higher tensile and shear loads compared with lower-grade fasteners, which supports safer clamping under increased cutting forces. This durability reduces replacement frequency and helps maintain consistent clamping performance over time. Organised kit for efficient workshop use Presented as a 38-piece assortment in a wooden case with hinged lid, the kit keeps components organised and accessible at the bench or in the toolroom. Clear arrangement and sturdy storage accelerate selection of the required part and protect the hardware from surface damage when transported. The compact case supports tidy workshop practices and helps maintain productivity by keeping essential clamping elements to hand. Compatibility, application and selection guidance The clamping kit suits general-purpose fixtures, machine-bed set-ups and modular fixturing systems that accept a 12 mm T-slot and M12 hardware. For specific machine tables or unusual slot profiles, the thread and slot combination should be checked before installation. The set is ideal where robust, standardised clamping is required and where organised storage reduces setup time and operational interruptions. Contact Metav Werkzeuge for tailored advice on the AMF clamping screw set Nr. 6520 and to confirm compatibility with specific machine tables; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 4000833381NW Type: Nr. 6520 Product: clamping screw set Manufacturer: AMF SKU: 4000833381NW Packaging unit: 1 Facts T-slot size: 12 mm Thread: M12 Content: 38 pieces Strength classes: 8 and 10 Special features For T-slots All parts quenched and tempered Supplied complete in wooden case with hinged lid FAQ What does the set contain? The AMF clamping screw set Nr. 6520 is supplied as a 38-piece kit intended to cover common clamping needs for machine tables; the SKU is 4000833381NW. Is this kit suitable for a 12 mm T-slot? Yes, the components are configured for use with a 12 mm T-slot and standard M12 clamping arrangements. Which thread size is included in the set? The kit contains M12 threaded clamping elements suitable for M12 tapped or bolted connections in fixtures. What is meant by strength class 8 and 10? Strength class 8 and 10 denote higher-grade fasteners with increased tensile and shear capability; the AMF set uses these classes to provide improved load capacity and longer service life under machining forces. Are the components hardened? All parts in the set are quenched and tempered, improving durability and resistance to wear during repeated clamping cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Clamping Bolt Set M12 42-Piece Hardened Steel, Strength Class 8/10 - AMF
Take advantage of secure, industrial-grade clamping with hardened components and reliable M12 threads for consistent fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. AMF Clamping screw set Nr. 6520 – T‑slot 14 mm, M12 thread The Clamping screw set Nr. 6520 is a workshop-ready clamping kit designed for secure fixturing in 14 mm T‑slots, suitable for general machine table and assembly applications For 14 mm T‑slots M12 threaded fastening Hardened parts, strength class 8 and 10 Complete kit in wooden case with hinged lid Reliable clamping for precision fixtures The set delivers robust clamping through a standard M12 thread matched to 14 mm T‑slots, enabling stable fixation on machine tables and modular fixturing systems. The thread geometry is optimised for repeated tightening cycles, so fixtures remain steady during machining or assembly. The kit is intended for industrial and workshop use where repeatability and positional stability are required; the design reduces setup time and minimises rework by keeping clamps centred and tensioned correctly. Compatibility with common T‑slot profiles makes this solution a practical choice for retrofit or new bench installations. Durability and service life engineered in All components in the kit are hardened parts, supplied in two strength classes (8 and 10) to balance toughness and maximum load capacity. Hardened fasteners resist deformation and thread wear under frequent use, which extends service intervals and lowers lifecycle costs compared with untreated alternatives. Strength classes indicate different tensile properties: the higher class provides greater resistance to shear and tensile stress in heavy clamping applications. For production environments where downtime is costly, the long-term reliability of hardened components supports continuous operation and fewer maintenance interruptions. Organised kit for efficient shop workflows Supplied as a complete kit in a wooden case with hinged lid, the components are organised for quick access and secure storage. The wooden container protects parts from dust and prevents loss between shifts, while the hinged lid simplifies inventory checks and transport. A compact, ready-to-use set reduces procurement complexity by bundling essential clamping pieces into a single item, allowing technicians to focus on setup rather than sourcing individual parts. Clearly identifiable components and straightforward arrangement streamline changeovers and support faster job completion on the shop floor. For tailored advice on the AMF clamping screw set Nr. 6520 and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and ordering information Technical data SKU: 4000833382NW Article number: Nr. 6520 Product type: Clamping screw set Brand: AMF Facts T‑slot width: 14 mm Thread: M12 Content: 42 pieces Packaging unit: 1 UID: 4000833382NW Special features For T‑slots All parts hardened Strength class 8 and 10 Complete in wooden case with hinged lid Comprehensive clamping kit FAQ What T‑slot profile is the set compatible with? The Clamping screw set Nr. 6520 is designed for 14 mm T‑slots and will fit tables and fixtures that accept a 14 mm T‑slot profile. Which thread size is used in the kit? The kit uses an M12 thread, specified in the Clamping screw set Nr. 6520, suitable for standard M12 clamping components. What does strength class 8 and 10 mean for daily use? Strength classes 8 and 10 in the Clamping screw set Nr. 6520 indicate graded tensile and shear resistance; class 10 items provide higher load capacity for heavier clamping needs. Are the components ready for industrial operation out of the box? Yes, the AMF Clamping screw set Nr. 6520 is supplied as a ready-to-use kit in a wooden case with hinged lid, prepared for immediate deployment in shop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Clamping Screw Set M16 38-Piece Hardened, Strength Class 8/10 - AMF
Take advantage of a robust combination of tempered M16 fasteners and compatibility with 18 mm T-slots for dependable clamping performance; the comprehensive set is supplied in a wooden case for organised storage. Order the clamping screw set directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw set No. 6520 – M16 fasteners for 18 mm T-slots (AMF) Clamping screw set No. 6520 designed for fixture and machine-table clamping in 18 mm T-slots Hardened components for high load applications M16 thread for standard clamping connections Compatible with 18 mm T-slots Complete set in wooden case with hinged lid Consistent, high-force clamping for machining and fixtures This clamping set delivers reliable clamping force thanks to components that are fully tempered, ensuring dimensional stability under repeated load. The use of M16 fasteners provides a recognised thread standard for machine tables and fixture systems, simplifying integration into existing setups. For manufacturers and workshops seeking dependable repeatability, the hardened construction reduces fastener deformation and extends service intervals, supporting uninterrupted production cycles. Engineered strength and material resilience for demanding tasks Components in the set are supplied with strength class 8 and strength class 10, offering a choice between high tensile capacity and extra-high performance where required. The tempered treatment of all parts improves fatigue resistance while maintaining machining accuracy; this combination is particularly useful when clamping steels or alloyed materials under elevated loads. Technical users benefit from clearer specification compliance and predictable mechanical behaviour across diverse clamping scenarios. Organised delivery optimises workshop workflow Delivered complete in a wooden case with hinged lid, the set keeps components organised at the point of use, reducing search time and downtime. The tidy storage solution supports a systematic workshop layout and protects the fasteners from contamination when not in use. For operations aiming to streamline setup times and maintain traceability of clamping hardware, the packaged arrangement contributes to a faster, cleaner workflow. Broad compatibility and practical applications Designed for standard 18 mm T-slots, the kit suits machine tables, drilling and milling fixtures, and modular clamping systems found in small-batch production and toolroom environments. The combination of standard M16 thread and hardened fasteners makes the set a versatile choice for securing workpieces from aluminium to alloyed steels. Where precision and repeatability are essential, the set supports efficient clamping without the need for customised fasteners. Contact Metav Werkzeuge today to discuss how the AMF clamping screw set No. 6520 can be matched to specific fixture requirements or to request a detailed specification from our Emmerich team Technical data SKU: 4000833385NW Type: No. 6520 Product: Clamping screw set Manufacturer: AMF Thread: M16 Facts T-slot compatibility: 18 mm Contents: 38 items Pack unit: 1 Special features All parts tempered Strength class 8 and strength class 10 Supplied in wooden case with hinged lid Suitable for T-slots FAQ What materials can be clamped with this set? The AMF clamping screw set No. 6520 is designed for general workshop and production use and, with its tempered fasteners and strength classes 8/10, is suitable for clamping materials ranging from aluminium to alloyed steels in standard machining operations. Is the thread standard compatible with common fixtures? Yes. The set uses M16 threads, which are a common standard for clamping fixtures and machine tables, ensuring straightforward compatibility with existing clamping hardware. Does the set include all components for immediate use? The delivery of the AMF clamping screw set No. 6520 is complete and comes organised in a wooden case with hinged lid, providing an immediately usable assortment of fasteners and accessories for workshop deployment. Are the components treated for durability? All components in the set are tempered, offering improved fatigue resistance and longer service life under repeated clamping cycles; the inclusion of strength class 8 and 10 gives options for higher tensile requirements. Can this set be used on modular clamping systems? Yes. With compatibility for 18 mm T-slots and standard M16 threads, the set is suitable for modular clamping systems, machine tables and fixture assemblies commonly found in production and toolroom environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com