Durable EREMA spare parts for shredders and granulators that keep production running
EREMA spare parts for shredders, granulators and other size-reduction equipment deliver reliable wear resistance and process stability, ensuring continuous pellet production and reduced downtime. Designed to match the demands of recycling and extrusion plants, these parts support precise cutting and throughput control in granulation processes using heated die plates and rotating knives, with options optimised for water, air or strand granulation. By focusing on robust materials and fit-for-purpose design, they provide long service life and consistent regranulate quality while simplifying maintenance of knives, die plates and cutting heads.
46 x 24/13.2 x 0.9 Granulator Knife Bi-Metal M42, for EREMA Recycling Machines - MetavCUT
Take advantage of enhanced cut quality and prolonged wear life from a Bi‑metal M42 blade, ensuring consistent pellets and reduced downtime; order MetavCUT replacement knives directly via Metav Werkzeuge or contact our consultants for application advice. Shredder/Granulator knife 46 x 24/13.2 x 0.9, Bi‑metal M42 — MetavCUT The Shredder/Granulator knife 46 x 24/13.2 x 0.9, Bi‑metal M42 is a precision wear part designed for EREMA recycling and granulation machines, offering a durable cutting edge for shredders and pelletisers. Bi‑metal M42 for extended wear life Precision fit for EREMA granulators Consistent pellet quality and low dust Suitable for shredders and granulators Longer runtime through Bi‑metal construction The combination of a high‑speed steel cutting edge and a tough backing metal results in a Bi‑metal M42 blade that resists wear while retaining sharpness. This construction extends service intervals and lowers the frequency of blade changes, which improves overall line efficiency. In practical terms, a tougher cutting edge means fewer interruptions for regrinding or replacement, translating into measurable production gains and reduced operating cost per tonne of processed material. Consistent material quality and precise fit for EREMA lines Designed to match EREMA granulators and shredders, the Shredder/Granulator knife 46 x 24/13.2 x 0.9 achieves a consistent cut profile that directly affects pellet uniformity and downstream processing stability. A correctly dimensioned blade reduces fines and dust generation, improving bulk material handling and minimising losses. The precise geometry ensures reproducible performance from batch to batch, which supports stable extrusion and better regranulate quality for subsequent use. Efficient maintenance and process reliability A wear part that is passgenau and robust simplifies maintenance planning and protects machine uptime. The knife’s dimensions and edge geometry are selected to balance durability and cutting performance, making replacements straightforward and predictable. Using pro‑cess‑optimised spare parts reduces the risk of unplanned stops and helps maintain consistent product quality, while support from a central European supply hub ensures dependable availability and quick logistics when spares are required. Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und für den produktiven Einsatz konzipiert. For reliable MetavCUT wear parts that keep EREMA lines productive, contact Metav Werkzeuge to discuss compatibility and supply from our Emmerich hub — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: EREMA46x24/13.2x0.9Bi-metal-M42 Product name: Shredder/Granulator knife 46 x 24/13.2 x 0.9 Brand: MetavCUT Material: Bi‑metal M42 Facts Dimensions: 46 x 24/13.2 x 0.9 SKU: EREMA46x24/13.2x0.9Bi-metal-M42 Special features Application: Recycling plants, shredders, pelletisers for EREMA Function: Granulating and shredding of plastics, reducing to processable size Benefit: Optimised for low dust and consistent pellet formation FAQ What materials can this knife process reliably? The MetavCUT Shredder/Granulator knife 46 x 24/13.2 x 0.9, made from Bi‑metal M42, is intended for general plastic waste streams processed in EREMA equipment and supports consistent cutting of films, pipes and regrind. How does Bi‑metal M42 affect service life compared with standard steel? Bi‑metal M42 provides a harder cutting edge and a tougher backing, so the MetavCUT blade typically demonstrates longer wear life and retained edge sharpness compared with non‑alloyed steels, reducing replacement frequency. Is this knife compatible with all EREMA granulators? Compatibility is specified for EREMA shredding and granulation units; the knife’s dimensions (46 x 24/13.2 x 0.9) match common EREMA holder designs — please verify holder type before ordering. How does blade geometry influence pellet quality? The knife’s edge profile and precision fit decrease fines and dust, producing more uniform pellets and improving downstream melt handling and filtration in reprocessing lines. Can use of this knife reduce operational costs? By offering extended wear life and reproducible cut quality, the MetavCUT blade can lower maintenance intervals and material loss, which supports a better cost‑per‑tonne in continuous recycling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46 x 24/13.2 x 0.9 Granulator/Chipper Blade Bi-Metal PM, for EREMA Machines - MetavCUT
Take advantage of a Bi-metal PM construction and a precision fit for EREMA machines to secure consistent pellet quality and reduced dust generation; combine long wear life with straightforward replacement options and order through Metav Werkzeuge or consult our specialists for tailored advice. EREMA46x24/13.2x0.9Bi-Metal-PM — Granulator and shredder knife with Bi-metal PM edge for precise cutting EREMA46x24/13.2x0.9Bi-Metal-PM is a replacement granulator and shredder blade designed for material reduction and pelletising tasks in industrial recycling systems Bi-metal PM cutting edge for wear resistance Precision fit for EREMA machines Optimised geometry for low dust generation Reliable cut quality and consistent pellet size Consistent pellet quality through optimised cutting geometry The blade is engineered to deliver a consistent cutting profile that minimises fines and promotes even pellet formation. Its tailored geometry reduces occurrences of stringing and agglomeration in the melt or strand stage, resulting in a more uniform regranulate output. Fewer fines mean less downstream cleaning and a higher yield of usable material, which improves process efficiency and lowers operational waste. Durable Bi-metal construction for longer service intervals Made from Bi-metal PM, the cutter combines a hard, wear-resistant cutting edge with a tougher backing to withstand impact and mechanical stress. This material pairing prolongs the service life of the knife under continuous operation in shredders and granulators, reducing frequency of replacements and maintenance downtime. The result is a lower total cost of ownership for high-throughput recycling lines. Tailored compatibility to maintain machine performance Manufactured to match the original fit and mounting interfaces of EREMA machines, the blade ensures accurate alignment and secure seating in the rotor. A precise fit preserves rotor balance and protects bearings and drive components, supporting reliable production runs and avoiding unexpected stoppages. The adaptation to the OEM geometry also simplifies installation and eliminates the need for further machining. Operational benefits that support productivity and cleanliness Serration-free edges and uniform clearance achieved through correct blade geometry contribute to low dust generation and reduced material degradation. That improves both workplace cleanliness and the quality of the recovered polymer. With repeatable cuts and minimal burr formation, downstream filtration and drying stages operate more effectively, which supports continuous, high-quality output over prolonged cycles. Contact Metav Werkzeuge for high-performance replacement knives from MetavCUT and expert guidance on selection and fitment Technical data Article number: EREMA46x24/13.2x0.9Bi-Metal-PM Name: Granulator/shredder knife 46 x 24/13.2 x 0.9 for EREMA machines Brand: MetavCUT Facts Dimensions: 46 x 24/13.2 x 0.9 Material: Bi-metal PM Special features Application: shredders, cutting mills, granulators, pelletising systems Benefit: high cut quality and reduced dust Design: precision fit for EREMA machines Suitable for use in recycling and reprocessing lines FAQ Which machines is this blade compatible with? This blade is specified for use in recycling, shredding or pelletising equipment of the EREMA range and is supplied under SKU EREMA46x24/13.2x0.9Bi-Metal-PM. What material is the cutting edge made from? The cutting edge is manufactured from Bi-metal PM, combining a wear-resistant edge with a durable backing for extended service life. How does the blade affect pellet quality? The optimised cutting geometry of the blade improves pellet uniformity, reduces fines, and supports cleaner downstream processing for better regranulate quality. Is installation or re-sharpening straightforward? The component is produced to match EREMA mounting dimensions for straightforward replacement; re-sharpening intervals depend on application and material throughput but are extended by the Bi-metal PM construction. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts under our MetavCUT brand: our process-optimised wear parts fit precisely, last longer and are engineered specifically for productive, industrial use.
Keep production running with EREMA spare parts for granulators and shredders
EREMA spare parts for granulators and shredders cover both granulation systems and size-reduction machinery used across plastic recycling plants. Also referred to as EREMA granulator components and EREMA shredding replacement parts, these aftermarket items are designed for process optimisation, precise fit and long service life.
How granulation and shredding systems work in practice
Granulators convert molten or reprocessed plastic into uniform regranulate or pellets by forcing the melt through a heated perforated plate and cutting it with rotating knives. Cooling and transport occur via water, air or strand-based systems, with common configurations including hot-cut granulators, air-cooled granulators and strand pelletising lines. Shredders and other size-reduction machines prepare feedstock for granulators and include robust cutting assemblies and screens that are subject to high wear.
Practical benefits that improve uptime and efficiency
- Reduced downtime through readily available, process-optimised knives and perforated plates that match EREMA system requirements.
- Extended tool life and consistent pellet quality thanks to precisely engineered cutting heads and wear parts.
- Simplified maintenance: replacement of key components such as water and drying components or screening elements is straightforward and reduces RRT (required repair time).
- Flexible cooling and transport compatibility for water, air or strand granulation setups, maintaining stable throughput.
- Cost-effective alternative to OEM parts while maintaining process reliability and pellet consistency.
Why choose METAV components for EREMA systems
While EREMA remains the established OEM for extrusion and granulation machinery, METAV offers a focused aftermarket portfolio of process-optimised replacement parts that are passgenau, langlebig and wirtschaftlich — translated into practice as precise fit, durable construction and economical operation. Metav’s position as a precision partner in Emmerich combines decades of sector expertise with a curated range that supports industry, trade and workshops. With over 48,000 customers, a catalogue exceeding 250,000 products and a reliable logistics base in Emmerich, Metav acts as a quality filter for the European market and a single-source supplier for spare and wear parts.
Summary: reliable parts that keep your line productive
EREMA spare parts for granulators and shredders provide targeted, engineered replacements—EREMA granulator components and EREMA shredding replacement parts—that help maintain pellet quality, reduce downtime and lower total operating costs.
FAQ
What types of granulator parts are included in this category?
The category covers essential granulator components such as knives, perforated plates, cutting heads, plus water and drying modules and other wear parts used in EREMA granulation systems.
How do METAV replacement parts differ from original EREMA parts?
METAV parts are aftermarket components optimised for process efficiency; they are designed for precise fit and long life to deliver comparable pellet quality and improved cost-effectiveness for EREMA machines.
Which granulation methods are supported by these spare parts?
Spare parts are suitable for hot-cut granulators, air-cooled granulators and strand pelletising systems, accommodating water, air or strand cooling and transport arrangements.
Can these parts help reduce maintenance time?
Yes. The components are engineered for straightforward replacement of wear items, lowering repair time and helping to keep throughput consistent during scheduled maintenance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com