Take advantage of a compact, energy-efficient LED unit with a 6W output and a reinforced 220 x 310 mm arm to improve inspection accuracy and reduce repositioning time; order the lamp directly via Metav Werkzeuge or ask for specification advice from our consultants. VLED-30M reinforced LED inspection lamp — 6W output, 220 x 310 mm arm (Vertex) A reinforced VLED-30M LED lamp designed for precise task illumination at inspection benches and production workstations. 6W LED light output for clear illumination Reinforced arm 220 x 310 mm for stable positioning Compatible with 220 V mains supply Robust build at 1.8 kg for industrial use Precise, energy-efficient illumination for inspection tasks The lamp delivers a 6W LED output operating from a standard 220 V mains supply while providing a low-voltage 12 V light source, combining safety with consistent brightness. The low-power LED design ensures energy-efficient operation and long service intervals compared with halogen alternatives. For quality control stations and visual inspection tasks, the stable light output supports reliable defect detection and reduces the need for repeat checks, contributing to smoother production flow and better throughput. Stable positioning that supports repeatable results An articulated arm measuring 220 x 310 mm and a reinforced support structure allow accurate placement and repeatable alignment across inspection cycles. The lamp’s mass (approximately 1.8 kg) contributes to mechanical stability, reducing vibration and drift during fine visual tasks. This stability translates into less operator fatigue and fewer readjustments, which is particularly advantageous in high-precision environments such as metrology benches, electronics assembly and small-part inspections. Built for workshop environments and simple integration The compact head and steady mounting geometry make the light unit suitable for integration beside microscopes, measuring fixtures and assembly jigs where localised illumination is required. The robust construction supports frequent handling and repositioning typical in busy workshops without compromising beam consistency. Clear, shadow-free illumination helps to speed up visual inspection and enhances the reliability of manual measurements and visual checks. Trusted sourcing and practical advantages for procurement Sourcing the unit from an established supplier reduces procurement risk: the lamp is a Vertex product and is listed with a clear SKU for ordering, streamlining stock control and replacement planning. Metav’s offering emphasises availability from the Emmerich warehouse, where quality is vetted for the European market; this supports predictable lead times and consistent restocking for production-critical lighting equipment. Contact Metav Werkzeuge in Emmerich for specification support on the Vertex VLED-30M and to confirm suitability for inspection benches — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VLED-30M Manufacturer: Vertex GTIN: 4061905094705 Eclass: 27110640 ETIM: EC001959 Facts Power supply: 220 V Light output: 12 V / 6 W Arm dimensions: 220 x 310 mm Weight: 1.8 kg Special features Reinforced version (verstärkt) Designed for workshop and inspection use SKU: VLED-30M FAQ What type of light source does the lamp use? The lamp uses a 6W LED light source; the Vertex VLED-30M provides a low-voltage 12 V output supplied from a 220 V mains input for consistent illumination. Is the arm suitable for precise positioning? Yes, the reinforced 220 x 310 mm arm on the VLED-30M provides stable positioning for repeatable inspection alignment and reduced vibration. Can the lamp be used on inspection benches beside microscopes? The compact head and steady mounting geometry of this Vertex lamp make it suitable for use alongside microscopes and measuring fixtures where localised, shadow-free illumination is required. How heavy is the unit and what does that mean for durability? At approximately 1.8 kg, the lamp offers a substantial feel that contributes to mechanical stability and resilience during frequent repositioning. Is this a Vertex product and is there an SKU for ordering? Yes, the lamp is a Vertex product listed under SKU VLED-30M, which simplifies ordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from precise inspection lighting thanks to bright LED illumination and a 2.25× magnifier (5 dioptres); the stable base and dual-voltage operation support consistent workflow — order the VHL-30TLED directly via Metav Werkzeuge or consult our advisers if needed. VHL-30TLED work lamp with integrated magnifier and LED illumination by Vertex The VHL-30TLED is a work lamp with integrated magnification designed for close visual inspection, assembly and quality-control tasks in workshops and laboratories. Integrated LED illumination 2.25× magnifier (5 dioptres) Dual-voltage 110/220 V compatibility Stable 292 mm base, 1.8 m cable Illuminate fine detail with reliable magnification The VHL-30TLED combines a high-clarity lens with 2.25× magnification (equivalent to 5 dioptres) to make small features visibly distinct and measurable. A magnifier of this strength reduces the need for awkward viewing angles and supports repeated visual checks, which improves consistency in inspection and assembly. The optical specification is suited for tasks where small tolerances must be verified visually, and the magnification is balanced to keep the field of view practical for industrial use. Stable setup for repeatable inspection A 292 mm base and a weight of 3.5 kg provide a firm, vibration-resistant platform that keeps the lamp in place during precise operations. The included 1.8 m cable and dual-voltage option (110 V or 220 V) enable quick integration into different workstations and international settings without additional adapters. Together, these characteristics promote a steady working environment and reduce interruptions, making inspection cycles more efficient. Optical design that reduces eye fatigue and improves contrast The lamp uses LED illumination to deliver consistent light output with low heat generation, reducing glare and thermal load at the workpiece. Consistent illumination improves contrast on fine edges and surface defects, supporting faster visual decisions and fewer re-measurements. The optical setup is intended to lower operator fatigue during prolonged inspection sessions while maintaining sufficient illumination to reveal subtle features. Ready for workshop use and flexible installation With an IP20 protection rating the lamp is intended for controlled indoor environments typical of benches and inspection tables. The unit’s compact footprint and included cable allow straightforward placement where concentrated lighting is required. For bespoke workplace arrangements, Metav provides advice on effective positioning and mounting alternatives so that the lighting contributes directly to process reliability and operator comfort. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex VHL-30TLED and to confirm suitability for specific inspection tasks — phone, email and WhatsApp contact options are available from the dealer Technical Data Article number: VHL-30TLED GTIN: 4061905091117 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Weight: 3.5 kg Base length: 292 mm Magnification: 2.25× (5 dioptres) Cable length: 1.8 m Voltage: 110 V or 220 V Protection class: IP 20 Special features LED illumination Integrated magnifier lens Stable base for bench use Included power cable FAQ What level of magnification does the VHL-30TLED provide? The VHL-30TLED offers a 2.25× magnification, corresponding to 5 dioptres, which is suitable for close visual inspection and precision assembly tasks. Is the lamp suitable for international use with different mains voltages? Yes, the lamp is supplied for 110 V or 220 V operation, allowing use in different regions without modification. Can the VHL-30TLED be used in production environments with exposure to dust or coolant? The VHL-30TLED has an IP20 rating, which is suitable for indoor workbenches and controlled environments but not for areas with high dust or liquid exposure. What illumination technology does the lamp use and what are the benefits? The lamp uses LED illumination, offering consistent light output, low heat at the work area and improved contrast for defect detection. What is included with delivery of the VHL-30TLED? Delivery includes the lamp and an 1.8 m cable for immediate integration at the workstation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable LED illumination and a precision magnifier to speed up inspection tasks while maintaining consistent results; the articulated arm and robust balance support stable positioning across frequent use. Order the unit directly via Metav Werkzeuge or consult our specialists for configuration and delivery. VHL-30MLED Work Lamp — LED illumination with integrated 2.25× magnifier by Vertex The VHL-30MLED is a LED work lamp with an integrated magnifier and an articulated arm, designed for close visual inspection and detailed assembly tasks in industrial and laboratory environments. LED illumination for consistent colour rendering 2.25× magnification with 5 diopter lens Articulated arm 250 × 270 mm for precise positioning Supplied with 1.8 m cable; 110 V or 220 V operation Brighter inspection with low-heat LED lighting The LED light source delivers steady, high-contrast illumination that improves defect detection while producing minimal heat. Consistent colour rendering from the lamp reduces the need for repeated checks and supports faster decision-making on the shop floor. Energy-efficient operation also reduces running costs compared with conventional lamps, and the solid-state light source offers long service life for continuous use in production or quality-control stations. Flexible positioning that saves handling time An articulated arm measuring 250 × 270 mm enables accurate placement of the lamp head over components and tools, reducing repositioning during repetitive tasks. The unit’s balanced construction and 2.9 kg mass provide stable support without drift, which helps maintain focus and reduces operator fatigue during extended inspections. Improved ergonomics and rapid alignment increase throughput by shortening setup times for detail work. Integrated magnification for precise visual control The combination of 2.25× magnification and a 5 diopter lens offers a clear close-up view for inspection, soldering, or assembly operations where small features must be verified. Diopter rating indicates the lens strength for near work and assists in selecting the correct focal distance for detailed tasks. The lamp is supplied with a 1.8 m cable and supports 110 V or 220 V operation, while IP20 protection denotes suitability for indoor workshop and bench environments where splash protection is not required. For reliable inspection lighting and consistent visual results, choose the Vertex VHL-30MLED from Metav Werkzeuge — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VHL-30MLED GTIN: 4061905092084 Manufacturer: Vertex Facts Weight: 2.9 kg Arm: 250 × 270 mm Magnification: 2.25× Diopter: 5 Cable length: 1.8 m Voltage: 110 V or 220 V Protection class: IP20 Special features LED light source Integrated magnifier lens Articulated positioning arm Supplied cable included Indoor use, bench or workstation FAQ What level of magnification does the lamp provide? The lamp offers 2.25× magnification with a 5 diopter lens, which provides clear close-up viewing for inspection and fine assembly work. Can the unit be used on a workbench with frequent repositioning? Yes, the articulated arm (250 × 270 mm) and 2.9 kg construction ensure stable positioning and easy realignment for repetitive bench tasks. Is the lamp suitable for outdoor or wet environments? The unit is rated IP20, indicating it is intended for indoor use at workshop benches and is not protected against water ingress. Which voltages are supported by the lamp? The lamp supports 110 V or 220 V operation and is supplied with a 1.8 m cable for standard mains connections. Is the light source replaceable or serviceable? The lamp uses an integrated LED light source designed for long operational life; specific service or replacement details are available from the manufacturer. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a 3 W COB LED for wide-area illumination, a 3.8 V 1600 mAh Li‑Ion Polymer power supply and a contactless sensor switch ensures reliable, hands-free lighting for workshop tasks; order the headlamp directly via Metav Werkzeuge or consult their advisers for application guidance. LED headlamp 3.8V 1600 mAh (3 W) – TECWERK The LED headlamp 3.8V 1600 mAh (3 W) is a sensor-operated, hands-free light engineered for workshop maintenance, inspection and on-the-job repair where clear, wide-area illumination and simple operation are essential 3 W COB LED for high light output Two switchable brightness levels Touchless sensor for hands-free control Clear illumination that speeds up tasks The lamp uses a COB LED delivering a concentrated yet even beam that covers the immediate work area, reducing the need for repeated repositioning and enabling precise visual inspection. With two switchable brightness levels, lighting can be adapted to fine detail work or broader area tasks, which improves efficiency and reduces eye strain. The design focuses on usable output rather than marketing figures, giving a practical solution for routine maintenance and assembly work. Sensor control for uninterrupted workflow A touchless switch with sensor function allows the light to be turned on or off with a simple hand movement, so the light remains usable while wearing gloves or handling tools. The sensor operation supports genuine hands-free working and reduces contamination of controls in dirty or oily environments. This intuitive control method shortens task time and keeps focus on the process rather than on fiddly switches. Recognisable battery status and dependable power Power is supplied by a 3.8 V, 1600 mAh Li‑Ion Polymer battery that is lightweight and compact yet sufficiently rated for typical maintenance periods. A clear LED battery charge indicator signals charging progress — red while charging and green when charging is complete — so battery status is immediately visible and planning for recharging becomes straightforward. The battery technology chosen balances energy density and practical service life for frequent use. Ready for workshop routines and simple storage Supplied in blister packaging, the lamp is compact to store and easy to pick up for single-person use or as part of a tool kit. The robust, no-frills construction and sensor operation make it suitable for mechanics, electricians and maintenance engineers who need dependable, hands-free lighting without complicated setup. The product integrates easily into established toolrooms and is suitable as a routine spare for mobile service teams. Choose TECWERK’s sensor-controlled headlamp for safer, more efficient workshop lighting — contact Metav Werkzeuge in Emmerich for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000877173NW Label: LED headlamp 3.8V 1600 mAh 1x Li‑Ion Polymer 3 W Blister packaging TECWERK Packaging unit: 1 Core specifications Power: 3 W Light source: COB LED Battery: 3.8 V, 1600 mAh Li‑Ion Polymer Modes: Two brightness levels Special features Touchless sensor on/off LED battery charge indicator (red = charging, green = charged) Hands-free operation suitable for workshops Blister packaging for simple storage and retail display FAQ How is the light intensity adjusted? The lamp offers two switchable brightness levels; adjustment is made via the built-in control so the light output can be adapted to detailed or broad tasks. Does the lamp indicate charging status? Yes, the LED battery charge indicator shows red during charging and green when charging is complete for immediate status recognition. Which battery type is used and is it replaceable? A 3.8 V, 1600 mAh Li‑Ion Polymer battery is fitted; the specification and maintenance instructions are provided with the device. Is the headlamp suitable for workshop use with gloves? The touchless sensor allows operation without direct contact, enabling use while wearing gloves and during hands-on tasks. What is the product SKU for ordering? Ordering can be referenced by SKU 2000877173NW for the TECWERK LED headlamp. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable workshop illumination with reinforced construction and an articulated 400 mm arm delivers focused 12V/6W LED light and a compact 1.2 kg body for stable positioning. Benefit from durable indoor protection (IP20), simple mains connection at 220V, and straightforward integration into bench setups. Order the VLED-20L directly via Metav Werkzeuge or ask our consultants if needed. VLED-20L reinforced LED lamp by Vertex — 400 mm arm, 12V/6W The VLED-20L is a reinforced LED lamp engineered for precise bench lighting in metalworking and inspection tasks, offering compact, low-energy illumination and flexible positioning for workshop use. Reinforced construction for everyday workshop use 400 mm articulated arm for precise positioning Low-energy 12V / 6W LED illumination Compact 1.2 kg body with mains 220V connection Precision illumination that improves inspection and assembly The compact LED module provides consistent, low-heat light with a 12V/6W rating, ensuring clear visibility of fine details without excessive power consumption. This concentrated illumination minimises shadows and glare during inspection or assembly, increasing throughput and reducing error rates. The lamp’s electrical design for 220V mains simplifies installation at standard workshop supply voltages, while the low wattage contributes to reduced operating costs. Such technical clarity supports efficient workflows in quality control and small-series production. Flexible positioning for ergonomic, time-saving working An articulated 400 mm arm and lightweight construction enable rapid adjustment of the light source to the required angle and distance, improving ergonomics at the bench. The reinforced mounting and balanced head deliver stable placement once set, reducing the need for frequent re-adjustment and helping operators maintain focus on the task. With a compact footprint and modest mass of 1.2 kg, the lamp can be integrated into crowded workstations or attached to inspection rigs where space and manoeuvrability are at a premium. Durable indoor design that matches workshop conditions Engineered for indoor workshop environments, the lamp carries an IP20 protection rating suitable for controlled, dry areas. The robust build quality and tested components from Vertex mean a predictable service life under normal workshop conditions, supporting continuous operation in production or repair settings. Delivered via Metav Werkzeuge, the product benefits from a distribution network that emphasises reliable supply and technical guidance, ensuring users receive consistent quality and documentation for integration into their setup. Choose the Vertex VLED-20L for dependable task lighting and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order support Technical data SKU: VLED-20L GTIN: 4061905094491 Brand: Vertex Protection: IP 20 Light: 12V / 6W Power supply: 220V Arm length: 400 mm Weight: 1.2 kg Facts Arm length: 400 mm Weight: 1.2 kg LED output: 12V / 6W Supply voltage: 220V Protection class: IP20 Special features Reinforced construction (verstärkt) Suitable for indoor workshop use Compact and lightweight design eClass: 27110640 ETIM: EC001959 FAQ What supply voltage does the lamp require? The VLED-20L operates from a standard 220V mains supply while providing a low-voltage LED output of 12V/6W for the light source. Is the lamp suitable for precision inspection tasks? Yes; the focused 12V/6W LED and articulated 400 mm arm make the lamp well suited to detailed inspection and assembly work where targeted illumination is required. Can the lamp be used outdoors or in damp environments? No; the IP20 rating indicates protection for indoor, dry environments only and it is not rated for outdoor or high-humidity use. How heavy is the unit and how does that affect mounting? The lamp weighs 1.2 kg, a modest mass that allows for secure mounting on benches and racks without imposing excessive load on fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, adjustable workshop lighting that combines low energy consumption and precise positioning. The articulated arm and focused 6W LED deliver consistent illumination for inspection and assembly tasks; order the LED lamp directly via Metav Werkzeuge or ask our consultants if needed. VLED-30L LED lamp with articulated arm and low-energy illumination — Vertex The VLED-30L is a compact LED lamp designed for bench and inspection lighting, supplying focused brightness for workshop and precision tasks. Articulated arm 400x310 mm for precise positioning Low-energy 6W LED with 12V light output Mains-compatible 220V input for easy integration Lightweight design at 2 kg for flexible use Improved inspection quality with focused, low-energy light The compact worklight delivers a concentrated beam from a 6W LED source, providing consistent, shadow-reduced illumination that supports visual inspection and fine assembly. With a 12V light output matched to a 220V mains supply via internal conversion, the fitting reduces heat generation and stabilises colour rendition, which helps maintain measurement accuracy and reduces visual fatigue during extended tasks. The efficient light source is especially useful where defined contrast and steady luminance are required for quality checks. Precise positioning thanks to a compact articulated arm An articulated arm measuring 400x310 mm offers a balance between reach and compactness for typical bench setups. The arm geometry enables localized, accurate repositioning of the lamp head without taking up excessive workspace, allowing operators to direct light exactly where needed. At approximately 2 kg, the assembly remains manageable for re-positioning and temporary removal, while still providing sufficient rigidity for stable, vibration-resistant illumination during precision operations. Energy efficiency and practical mains compatibility This LED fitting is engineered for low running costs: the combination of a 6W light source and modern LED technology keeps energy consumption modest while offering long operating life and reduced maintenance compared with traditional lamps. The unit is configured for 220V mains input, simplifying installation in standard workshop and industrial environments and enabling reliable operation on typical supply voltages without additional transformers or adaptors. Workshop-suitable construction with straightforward integration Rated IP20, the lamp is intended for indoor use on workbenches and inspection stations rather than outdoor or high-humidity environments. The design includes reinforced components for everyday workshop handling, ensuring the lamp remains a dependable part of a toolroom or production bench. High-resolution images and technical illustrations are available for integration planning and space assessment to confirm compatibility with existing workstations. For procurement, technical clarification or to arrange delivery via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will assist with specification matching and order handling. Technical data Article number: VLED-30L GTIN: 4061905083730 eClass: 27110640 ETIM: EC001959 Brand: Vertex Key measurements Arm reach: 400 x 310 mm Light specification: 12V / 6W Power supply: 220V Weight: 2 kg Special features Protection class: IP20 Product type: LED lamp Reinforced design Image assets available (VLED-30L-main.png, VLED-30L-detail.png) FAQ What voltage and power does the lamp require? The VLED-30L LED lamp operates from a 220V mains supply with a 12V / 6W LED light output, providing low-energy illumination suitable for bench applications. Is the lamp suitable for inspection and assembly tasks? Yes. The focused light and articulated arm of the VLED-30L make it well suited to inspection, assembly and other precision tasks where steady, localized illumination is required. How compact is the lamp’s reach and can it be repositioned easily? The articulated arm measures 400 x 310 mm and allows precise repositioning; the overall weight of about 2 kg facilitates handling without compromising stability. Can the lamp be used outdoors or in humid environments? The fitting is rated IP20 and is intended for indoor workshop use; it is not designed for outdoor or high-humidity environments. Which brand manufactures this LED lamp and what is the SKU? The LED lamp is manufactured by Vertex and listed under SKU VLED-30L, suitable for workshop bench and inspection lighting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of 9 W LED efficiency, IP67 protection for the light unit and the supplied 1.8 m cable to keep workshop lighting reliable and low-maintenance; order the unit directly via Metav Werkzeuge or contact our consultants for specification support. VLED-400L LED work lamp — waterproof, compact industrial illumination (Vertex) The VLED-400L is a compact LED work lamp designed to provide reliable, protected illumination for workshop and industrial environments under variable mains voltages. 9 W LED for low energy consumption Light IP67 protection for wet environments Compact 400 x 400 mm square reflector Includes 1.8 m power cable and mounting arm Consistent, protected light for continuous operation The lamp delivers stable LED illumination while the light unit benefits from IP67 ingress protection, reducing the risk of moisture-related failures in harsh environments. The arm is specified as IP20, meaning the fixture’s support structure is suited to indoor workshop conditions while the light head itself withstands wet and dusty conditions. Combined with compatibility for 110V/220V supplies, this configuration supports uninterrupted operation across common workshop power systems, helping to reduce downtime and protect inspection and assembly processes. Practical dimensions and easy deployment save time A square working surface of 400 x 400 mm and a total weight of 2.12 kg make the fixture compact enough for mobile positioning yet substantial enough for stable mounting. The lamp is supplied with a 1.8 m power cable to simplify initial installation and shorten setup time on the shop floor. The modest power rating of 9 W reduces electrical load and heat output compared with higher‑power alternatives, which benefits enclosed workstations and close‑proximity inspection tasks by maintaining a cooler, safer working environment. Designed for workshop and industrial use with flexible options Specified as a waterproof lamp and offered in an LED configuration, the fixture is appropriate for general workshop illumination, assembly benches and inspection stations where consistent, splash‑resistant lighting is required. The electrical compatibility with 110V/220V mains supports installations across varied sites. Supplied by Vertex through Metav Werkzeuge, the product is integrated into a distribution approach that emphasises dependable supply and a European quality filter for industrial customers. For supply, specification or rapid delivery from Metav Werkzeuge’s Emmerich warehouse, contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the Vertex VLED-400L LED lamp and confirm suitability for the intended application Technical data SKU: VLED-400L GTIN: 4061905088193 Manufacturer: Vertex Core specifications Power supply: 110V/220V Light rating: 9 W (LED) Weight: 2.12 kg Arm / reflector footprint: 400 x 400 mm (square) Cable included: 1.8 m Protection: Light IP67, Arm IP20 Special features Waterproof light head LED configuration Compact, square working area FAQ What level of ingress protection does the lamp offer for wet areas? The light head of the VLED-400L is rated IP67, providing protection against dust ingress and temporary immersion in water, while the arm is rated IP20 for indoor mounting stability. Is the fixture compatible with different mains voltages? Yes, the VLED-400L supports 110V/220V operation, making it suitable for a variety of workshop and industrial power supplies. What cabling and mounting accessories are supplied? The lamp is supplied with a 1.8 m power cable; the listed arm dimensions are 400 x 400 mm, and the unit’s overall mass is 2.12 kg, facilitating straightforward mounting and repositioning. Can the VLED-400L be used where halogen fixtures are currently installed? The VLED-400L is provided in an LED configuration that can replace higher‑consuming lighting types; confirm mounting and electrical compatibility against existing halogen installations before replacement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of IP67 protection, low‑power 9 W LED illumination and broad voltage compatibility for dependable workshop lighting. Order the lamp directly via Metav Werkzeuge or consult the team for application-specific advice. VLED-500L LED work lamp by Vertex — IP67, 9 W The VLED-500L is a waterproof industrial work lamp designed for robust workshop and site use, suitable for 110 V or 220 V supplies and available with halogen or LED light sources. IP67 protection for wet environments Energy-efficient 9 W LED illumination Dual voltage 110/220 V compatibility Incl. 1.8 m connection cable Industrial-grade lighting that keeps production moving The VLED-500L delivers IP67‑rated protection, ensuring reliable operation in dusty or wet conditions where standard fixtures fail. The combination of a 9 W LED module and a compact fixture design provides bright, focused illumination while keeping energy consumption low; this reduces running costs and mitigates heat build‑up at the workplace. For workshops that require continuous or intermittent task lighting, the robust protection class reduces unplanned downtime caused by ingress or corrosion, supporting stable production flows. Flexible installation for varied workspaces The lamp’s 110 V / 220 V compatibility allows deployment across different electrical environments without modification, simplifying procurement and fleet standardisation. An included 1.8 m cable enables immediate connection and temporary relocation between workstations, while the 400 x 400 mm (round) arm provides a practical mounting footprint for bench or machine‑mounted setups. With a mass of 2.42 kg, the unit balances portability and stability, making it suitable for mobile workshops and fixed installations alike. Low maintenance and adaptable lighting options Designed for long service life, the fixture accepts either halogen or LED modules where specified, but the energy-efficient LED option reduces maintenance intervals and lamp replacement frequency compared with filament sources. The compact LED module emits less waste heat and is less sensitive to vibration, which benefits precision workshop environments. Clear technical classification (eClass and ETIM) and the inclusion of a fitted cable streamline logistics and installation, enabling faster commissioning and limited on‑site adjustments. Contact Metav Werkzeuge to check the VLED-500L’s fit for specific workshop tasks or to request a detailed specification for your site; Metav’s consultants can advise on configuration and delivery from their Emmerich quality hub Technical data Article number: VLED-500L GTIN: 4061905005732 Manufacturer: Vertex Core technical data Protection class: IP 67 Supply: 110 V / 220 V Light output: 9 W (LED) Weight: 2.42 kg Arm: 400 x 400 mm (round) Features and accessories Waterproof construction Incl. 1.8 m cable Suitable for halogen or LED eClass: 27110640 ETIM: EC001959 FAQ What environments is the lamp suitable for? The VLED-500L is designed for industrial and workshop use and its IP67 rating allows operation in dusty and wet conditions where typical indoor light fittings would be unsuitable. Can the lamp operate on different voltages? Yes. The VLED-500L accepts 110 V / 220 V supplies, enabling deployment across sites with differing mains voltages without additional converters. Is a connection cable included? A 1.8 m cable is supplied with the VLED-500L to simplify installation and allow immediate use on site. Does the lamp come with LED fitted? The product description notes availability with either halogen or an LED module; the LED variant is energy‑efficient and reduces maintenance compared with filament lamps. How heavy is the unit and how large is the mounting arm? The lamp weighs 2.42 kg and features a 400 x 400 mm (round) arm dimension suited to common bench or machine mounting arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable, waterproof illumination and universal mains compatibility to maintain uninterrupted machine operation; the IP67 rating and 100–240 V range support continuous use in demanding workshop environments — order directly via Metav Werkzeuge or consult our advisors for tailored advice. VLED-W13 LED machine lamp — waterproof, universal-voltage work light VLED-W13 is a compact LED machine lamp designed for precise, durable illumination on workshop machinery and production benches IP67 protection for wet environments Wide voltage 100–240 V compatibility Robust yet portable at 2.2 kg Clear LED illumination for machinery Dependable illumination that keeps production moving A focused, stable light source reduces setup time and inspection errors in machining and assembly. The LED technology delivers consistent brightness with minimal thermal drift, which supports accurate visual checks and safe operation. Thanks to the IP67 classification, the lamp remains functional where splash, coolant or dusty conditions occur, so machine uptime is preserved and maintenance intervals are extended. The design emphasises long-term reliability and straightforward replacement when required. Universal power compatibility for flexible workshop use Universal mains operation (from 100–240 V) enables use across different sites and international installations without additional converters. This universal voltage capability simplifies logistics for service teams and contractors, allowing the lamp to be redeployed between machines and locations. At 2.2 kg the unit is substantial enough to remain stable in a workshop environment while still being manageable for repositioning. Practical compatibility reduces sourcing complexity and ensures predictable performance in mixed-voltage facilities. Workshop-ready construction and straightforward upkeep Constructed for the demands of a production environment, the lamp’s waterproof rating and protective enclosure keep internal components safe from contaminants. This reduces the likelihood of unexpected failures and supports a safer working area by maintaining reliable illumination even under adverse conditions. Routine servicing is simplified because the lamp focuses on essential functionality rather than complex electronics, so scheduled checks return lasting value and predictable operational behaviour. For tailored technical advice or to arrange procurement of the Vertex VLED‑W13, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific machines and delivery options Technical data Article number: VLED-W13 GTIN: 4061905005671 ETIM: EC001959 eCl@ss: 27110640 Core specifications Voltage: 100V-240V Protection class: IP 67 Weight: 2.2 kg Length: 448 Features & materials Product type: LED machine lamp Brand: Vertex Feature: waterproof Images available: main and detail FAQ What does IP67 mean for workshop use? IP67 indicates the lamp is dust-tight and protected against temporary immersion, so it withstands splash, coolant and dust commonly encountered in machining environments. Is the lamp compatible with international mains supplies? Yes, the universal 100–240 V range of the VLED‑W13 permits direct connection to most national mains supplies without additional converters. How heavy is the unit and is it portable between machines? The unit weighs 2.2 kg, which balances stability and portability for repositioning across machines or workstations. Can the lamp be used in coolant-prone environments? The waterproof design and IP67 protection make the light suitable for areas exposed to coolant sprays and similar contaminants. Who manufactures the lamp and where can procurement advice be obtained? The lamp is a Vertex product; procurement and technical guidance are available through Metav Werkzeuge in Emmerich. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable hybrid LED lighting that combines high luminous output, flexible power sources and robust protection for the workshop and site. Benefit from the 47 W / 5,500 lm performance and mains‑to‑battery automatic switchover — order via Metav Werkzeuge or contact our consultants for application advice. TECWERK Multi Battery Hybrid LED Floodlight — 47 W, 5,500 lm, IP54 The TECWERK Multi Battery Hybrid LED Floodlight is a versatile site and workshop light for mains or 18 V battery use, offering reduced glare and integrated powerbank functionality. Compatible with 18 V batteries from major brands Switches automatically between mains and battery Integrated USB output for powerbank use Dimmable: 100% / 50% / 25% settings IP54 splash‑proof, shock‑ and dust‑resistant Continuous illumination for uninterrupted workflows The hybrid worklight delivers a 47 W rating and 5,500 lm luminous flux for reliable, bright illumination in demanding environments. Designed for compatibility with common 18 V tool batteries (Bosch, Makita, Milwaukee, DeWalt, CAS/Metabo), the unit switches automatically from mains to battery operation to maintain light during power interruptions. The integrated USB output serves as a powerbank, enabling device charging on site, while the reported run time of 1.5–6.5 h (depending on battery capacity and dim setting) supports extended tasks without frequent battery changes. Clear, daylight‑balanced light that reduces fatigue The fixture produces a neutral 5,000 K light colour and a wide 120° beam angle to cover work areas evenly. An opal diffuser reduces glare and softens the beam for more comfortable visual conditions, which helps to minimise eye strain during precision tasks. With an expected service life of 50,000 h, the lamp maintains consistent colour and output over prolonged use, reducing maintenance cycles and ensuring steady illumination for inspection, assembly or general workshop activities. Robust design with safety and handling in mind Built to withstand jobsite conditions, the unit is rated IP54 for splash and dust protection and is described as shockproof. Practical features include a removable H07RN‑F cable (5 m, 3G1.5 mm²), a rear protective‑earth plug and a clear charge indicator for immediate status checks. The three‑step dimmable control (100% / 50% / 25%) extends runtime when required, and automatic mains/battery switchover functions as an emergency lighting safeguard. Compliance with BGI 608 K2 underlines its suitability for professional applications that demand documented safety standards. Choose the TECWERK hybrid floodlight for dependable, flexible site lighting and contact Metav Werkzeuge for tailored application advice or ordering — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000873433NW Product: TECWERK Multi Battery Hybrid LED Floodlight (translated) Packaging unit: 1 Brand: TECWERK Numbers / Core technical data Power: 47 W Light output: 5,500 lm Colour temperature: 5,000 K Beam angle: 120° Service life: 50,000 h Run time: 1.5–6.5 h Special features / Versions Compatibility: 18 V batteries (Bosch, Makita, Milwaukee, DeWalt, CAS/Metabo) Protection class: IP54 Cable: H07RN‑F 5 m 3G1.5 mm² (removable) Lighting control: Dimmable 100% / 50% / 25% Diffuser: Opal, glare‑reduced USB output: Integrated powerbank function Safety: Automatic mains/battery switchover Certification/standard: BGI 608 K2 Tested: Yes (prüfpflichtig) FAQ What power sources can be used with this floodlight? The floodlight accepts mains power or 18 V tool batteries; it is compatible with Bosch, Makita, Milwaukee, DeWalt and CAS (Metabo) battery systems and switches automatically between mains and battery operation. How long will the light run on battery? Run time ranges from 1.5–6.5 h, depending on the battery capacity used and the selected dimming setting on the TECWERK hybrid floodlight. Is the light suitable for outdoor worksites? Yes. The unit is rated IP54 for protection against dust and splashing water and is described as shock‑resistant, making it suitable for many outdoor and site applications. Can the lamp charge mobile devices? An integrated USB output provides a powerbank function so small devices can be charged directly from the floodlight while on site. Does the light reduce glare for close‑up tasks? The opal diffuser softens the beam and reduces direct glare, delivering a more even, comfortable light that supports precision work and visual inspection. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, robust 50 W lighting solution that combines high luminous output with practical mobility; the integrated 5200 mAh Li‑Ion battery and powerbank function ensure continued operation and device charging on site. Order the unit directly via Metav Werkzeuge or contact their consultants for tailored advice. TECWERK LED Floodlight 50 W – 800–4,500 lm, 14.8 V Li‑Ion, IP54 The TECWERK LED Floodlight 50 W is a portable worklight designed for workshop and site use, offering adjustable beam control and a built‑in powerbank for versatile illumination and device charging. 120 SMD LEDs for even illumination Adjustable beam: vertical 90° and horizontal 180° Integrated powerbank function for device charging IP54 housing and practical handle for site use Reliable, high‑output lighting for professional tasks The compact lamp delivers 800–4,500 lm from 120 SMD LEDs driven by 50 W of power, providing a choice between concentrated and broad illumination depending on the task. The internal 5200 mAh Li‑Ion battery at 14.8 V keeps the unit operational where mains access is limited, while the IP54 rating protects against dust and splashing water—suitable for demanding workshop and outdoor applications. The spec-driven design supports productivity by offering a strong, consistent light source that helps maintain workflow under variable site conditions. Precise illumination and comfortable colour rendering Thanks to the adjustable beam (vertical 90° and horizontal 180°) the lamp can be set for targeted task lighting or wide-area coverage, reducing the need for multiple fixtures. The neutral 5700 K colour temperature yields daylight‑like illumination that supports accurate visual inspection and reduces eye strain during fine work. These characteristics make the light appropriate for preparatory tasks, inspections and any situation where both intensity and colour fidelity matter. Practical features for everyday site use Built with a robust housing and a practical handle, the worklight is engineered for portability and frequent handling on site. The unit includes a visible battery indicator to monitor charge status and a powerbank function to recharge mobile devices or tools, adding operational flexibility. With a typical recharge time of approx. 3.5 h, the lamp is ready for repeated use after a short downtime. The device is noted as subject to inspection, ensuring that periodic safety checks and documentation are supported for professional environments. For technical advice or to request a tailored supply, contact Metav Werkzeuge – Metav’s specialists can advise on matching illumination solutions to specific workshop or site requirements; reach them at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000873354NW Model: TECWERK LED floodlight 50 W 800–4,500 lm Brand: TECWERK Core figures Power: 50 W Light output: 800–4,500 lm LEDs: 120 SMD Battery: 5,200 mAh, 14.8 V Li‑Ion Colour temperature: 5,700 K Charge time: approx. 3.5 h Beam angles: vertical 90°, horizontal 180° Protection class: IP54 Inspection required: yes Special features Adjustable beam Battery indicator Robust housing and practical handle Powerbank function Universal, portable use FAQ What is the typical light output range of this worklight? The worklight provides a variable light output between 800 and 4,500 lumens, enabling both focused task lighting and broad area illumination. How long does the battery take to recharge? The internal battery of the TECWERK LED Floodlight recharges in approximately 3.5 hours under normal charging conditions. Can the unit be used in wet or dusty environments? The floodlight has an IP54 protection rating, which makes it resistant to dust ingress and splash water—suitable for most site and workshop conditions. Does the light offer device charging capability? Yes, the integrated powerbank function allows the floodlight to supply power to USB‑charged devices, adding practical on‑site utility. Is a safety inspection required for this product? The product is listed as inspection required, meaning it should be included in regular safety and electrical checks as per workplace regulations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Durable, waterproof illumination with wide voltage compatibility and a compact 520 mm profile ensures reliable machine-side lighting for continuous production environments; benefit from proven Vertex quality and straightforward integration. Order the LED machine lamp directly via Metav Werkzeuge or ask our consultants if needed. VLED-W18 LED machine lamp — IP67 waterproof, 100–240 V input, Vertex The LED machine lamp provides robust, waterproof illumination for machine tools and workshop workstations, engineered for industrial environments where steady, glare-minimised light is required IP67 protection for wet environments Wide input range 100–240 V for global use Compact 520 mm length for focused illumination Robust build at 2.5 kg for industrial durability Consistent, high‑performance illumination for machining A reliable light source is essential for accuracy and safe operation at the machine. The VLED-W18 delivers stable LED output with an input range of 100–240 V, which removes the need for special transformers and supports use across varied supply conditions. The IP67 rating indicates dust-tight construction and protection against temporary immersion, so illumination remains unaffected by coolant spray or workshop washdowns. This combination of electrical compatibility and enclosure protection reduces downtime caused by failed lighting and contributes to a predictable production flow through long service intervals and fewer replacements. Easy integration and functional design for the workshop The lamp’s 520 mm length provides a concentrated lighting band suitable for tool zones and inspection areas without overwhelming adjacent workspaces. At 2.5 kg, the assembly is substantial enough to remain stable on common mounting arrangements yet remains manageable during installation or repositioning. The unit is specified for use with a 12 W lamp module, ensuring efficient energy use while maintaining adequate luminous output for close-up tasks. These characteristics mean the fitting can be specified confidently in retrofit projects or included in new machine layouts where consistent task lighting improves measurement reliability and operator comfort. Built for industrial reliability and procurement confidence Vertex has designed this machine light for repetitive production environments where robustness matters. The sealed construction and industrial-grade electronics aim to prolong operational life and reduce maintenance cycles. For purchasing departments and workshop managers, the lamp’s compatibility with standard voltages and its durable ingress protection simplify logistics and spare‑part planning. Metav Werkzeuge acts as a quality filter for the European market, offering access to Vertex products with transparent logistics and technical advisory support, which helps to de‑risk procurement and ensure that the chosen lighting meets on‑site requirements. For tailored advice on integrating the Vertex VLED‑W18 into production equipment or to confirm specification details, contact Metav Werkzeuge for consultancy and delivery from our Emmerich hub Technical data Article number: VLED-W18 GTIN: 4061905005688 Manufacturer: Vertex Machinery Works Co., Ltd. Core specifications IP rating: IP67 Input voltage: 100–240 V Length: 520 mm Weight: 2.5 kg Special features Waterproof construction Compatible with 12 W lamp module Designed for industrial machine illumination FAQ What does IP67 mean for use at the machine? IP67 means the lamp is dust-tight and protected against temporary immersion in water, so the VLED‑W18 remains operational in environments exposed to coolant spray and regular cleaning. Is the lamp compatible with different supply voltages? Yes, the VLED‑W18 supports an input range of 100–240 V, allowing installation across varied mains standards without additional conversion equipment. Can the VLED‑W18 be used for inspection and measurement tasks? The focused 520 mm length and consistent LED output make the lamp suitable for close‑range inspection and machine‑side measurement illumination. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, IP54-rated LED signalling with a Ø60 mm housing and robust 0.7 kg construction ensures reliable visual status indication in harsh environments; order the VLED-3SL directly via Metav Werkzeuge or consult the Metav advisors for specification matching and supply. VLED-3SL LED signal light — Vertex, IP54 protection, compact Ø60 mm The VLED-3SL LED signal light is a compact, IP54-rated signalling device designed for industrial control panels and machinery, offering high-visibility indication in environments exposed to dust and splashing water. IP54 protection against dust and splash High-intensity LED signalling Compact Ø60 mm housing Robust 0.7 kg industrial design Consistent visual signalling for demanding workflows The unit delivers clear visual indication through high-intensity LED illumination that remains legible under bright ambient light and factory conditions. Thanks to the IP54 rating, the device is protected against limited dust ingress and splashing water, which reduces the likelihood of signalling faults in routine production environments. This reliability supports continuous process monitoring and contributes to smoother machine operation by minimising unclear status signals and downtime. Compact footprint that simplifies installation planning With a Ø60 mm housing and a compact profile, the signal beacon occupies minimal panel space, enabling denser arrangement of indicators and controls within existing switchgear or control cabinets. The comparatively light 0.7 kg mass supports secure mounting without imposing significant load on panels or brackets. The compact design therefore aids efficient control layout and facilitates retrofitting into systems where space is constrained, while maintaining robust signalling performance. Durable design aimed at long-term operational uptime Constructed for industrial settings, the device combines a resilient enclosure with high-visibility LEDs to provide dependable service over extended operating periods. The unit’s resistance to environmental influences and mechanical resilience reduces the need for frequent replacement, contributing to lower maintenance intervals and predictable operational costs. Manufactured under the Vertex name, the product aligns with established industrial quality expectations and supports steady production workflows. Discuss the Vertex VLED-3SL IP54 LED signal light with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and arrange supply Technical data Article number: VLED-3SL GTIN: 4061905084102 Brand: Vertex Facts Diameter: 60 mm Weight: 0.7 kg ECLASS: 27110631 ETIM: EC001959 Special features Protection rating: IP 54 Description: LED signal light Marketing note: water-resistant and bright SKU: VLED-3SL FAQ What environments is the signal light suitable for? The VLED-3SL is intended for industrial environments such as control panels and machinery areas where IP54 protection against dust and splashing water is required. How does the IP54 rating affect performance? An IP54 rating means the enclosure provides protection against limited dust ingress and splash water, helping the VLED-3SL maintain reliable signalling in exposed workshop conditions. What is the installation footprint of the unit? The unit features a Ø60 mm housing that is optimised for compact panel mounting and space-conscious control layouts. Is the device heavy to handle during installation? At approximately 0.7 kg, the signal light is sufficiently robust while remaining light enough for straightforward mounting in standard control panels. How can the VLED-3SL be ordered or specified for a project? Specification and ordering for the Vertex VLED-3SL can be arranged through Metav Werkzeuge; refer to the SKU VLED-3SL and GTIN 4061905084102 when placing enquiries. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of energy efficiency and a compact, lightweight design to maintain reliable workshop illumination with minimal installation effort. Combine steady, low-power lighting and simple replacement logistics for uninterrupted operations. Order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. LED6W — Vertex 6 W LED bulb accessory, compact and energy-efficient A LED6W accessory lamp offering low-power illumination for workshop and industrial lighting tasks, designed as a compact replacement solution for compatible LED fittings. *6 W energy-efficient LED bulb for steady illumination *Compact form factor for confined fittings *Lightweight 140 g for easy installation and replacement Reduced energy use without sacrificing practicality The small 6 W rating reflects a design focused on low power draw, which helps reduce operating costs where many fittings run continuously. The lamp’s compact profile allows integration into crowded luminaires and task lights commonly found in workshops and production benches. For procurement and inventory planning, the combination of low wattage and compact dimensions supports efficient energy management and straightforward stocking. Designed for straightforward installation and handling Built as an accessory for LED fittings, the unit’s lightweight 140 g construction simplifies handling during maintenance cycles and reduces strain on sockets and fixtures. The modest mass and compact geometry enable easy replacement and minimise downtime during shift changes. Technical teams benefit from the ease of handling when retrofitting or standardising illumination across workstations. Practical fit for industrial and workshop environments Although specified as an accessory for LED lamps, the component is intended for applications where dependable, focused lighting is required rather than architectural illumination. The accessory characteristic supports modular lighting strategies, permitting targeted upgrades without overhauling entire luminaires. This approach assists maintenance planners and production managers in achieving consistent lighting levels across critical work areas. Compatibility and procurement clarity The article is listed under Vertex and carries the SKU LED6W, facilitating straightforward ordering and stock management. The classification data included supports compatibility checks and catalogue integration for procurement systems. Specifiers and warehouse staff can use the SKU and GTIN entries to match existing fixtures and to ensure rapid replenishment from central stock. For tailored supply and application guidance on Vertex LED accessories, contact Metav Werkzeuge in Emmerich for reliable delivery and expert advice via email (info@metav-werkzeuge.com) or phone (+49 2822 7131930) to confirm suitability for intended fittings and lighting layouts. Technical data SKU: LED6W GTIN: 4061905089480 Manufacturer: Vertex Core specifications Power: 6 W Weight: 0.14 kg Features and compatibility Accessory for LED lamps Category: Zubehör für LED-Lampen ECLASS: 27110390 FAQ What is the intended application for this LED accessory? The LED6W is intended as an accessory lamp for LED fittings, suitable for workshop and industrial task lighting where compact, low-power illumination is required. How heavy is the Vertex LED6W unit? The Vertex LED6W weighs 0.14 kg, which supports easy handling and replacement in standard fixtures. Which identifiers help with ordering and inventory? Ordering and inventory reference values include the SKU LED6W and the GTIN 4061905089480, used to match the correct accessory in procurement systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the 9 W LED energy efficiency and the IP67-protected light head for reliably bright, low-heat illumination in demanding workshop environments; the compact 220×220 mm arm and included 1.8 m cable make installation and immediate use straightforward — order directly via Metav Werkzeuge or ask our consultants for tailored advice. VLED-400M workshop inspection lamp by Vertex — 9 W LED, IP67 light head The VLED-400M is a waterproof inspection lamp designed for machine and workshop lighting, offering low-energy LED illumination and a compact square arm for targeted task lighting. 9 W LED for energy-efficient illumination Light head rated IP67 for wet environments Compact 220×220 mm square arm for precise positioning Includes 1.8 m cable for immediate installation Reliable illumination where accuracy matters The inspection lamp delivers steady LED light that supports close visual work without the high temperatures associated with older halogen solutions. With a rated output of 9 W, the lamp head provides efficient, continuous illumination that improves visibility on fine details and reduces operator fatigue during lengthy tasks. The low power draw also helps maintain a cooler work environment near sensitive components, contributing directly to process reliability and operator comfort. Durable protection for the lamp head, clear limits for the arm The light head is IP67-rated, meaning the illumination unit is protected against dust ingress and temporary immersion — a significant advantage when coolant splashes or wet-cleaning cycles occur. The supporting arm carries an IP20 rating, which highlights that while the lamp head is sealed against moisture, the arm is intended for use in standard workshop atmospheres rather than submerged or continuously wet conditions. This distinction allows confident placement of the fixture where protection is needed most, while clarifying suitable mounting scenarios. Voltage compatibility and practical on-site readiness Electrical compatibility with 110–220 V mains permits straightforward integration across varied supply networks, avoiding the need for custom transformers in many installations. The lamp is supplied with a 1.8 m cable, enabling immediate connection and flexible routing to nearby power sources. The relatively compact form and weight of 1.96 kg support secure mounting on machine guards, benches or stands without excessive strain on fixtures, making the unit a practical choice for retrofit and new-equipment setups alike. Designed for workshop use and straightforward procurement The fixture’s square 220×220 mm arm gives precise positioning for focused tasks such as inspection, assembly or maintenance checks. Classified under ETIM and ECLASS identifiers, the product supports structured procurement and integration into parts lists and inventories. The lamp is available in LED or halogen variants, allowing selection according to lighting preference and application needs. Supplied ready to install with cable, the unit reduces commissioning time and simplifies stocking for facilities managers. For reliable workshop lighting from a recognised brand, contact Metav Werkzeuge to discuss the Vertex VLED-400M and receive expert guidance and swift delivery from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VLED-400M GTIN: 4061905088414 Manufacturer: Vertex Facts Power supply: 110V/220V Light output: 9 W (LED) Arm size: 220×220 mm (square) Weight: 1.96 kg Special features Light head IP67, arm IP20 Available in halogen or LED versions Included accessory: Cable 1.8 m Classified: eClass 27110640, ETIM EC001959 FAQ Is the light head fully waterproof and suitable for wet-cleaning? The light head is rated IP67, so temporary immersion and splash-prone cleaning are supported; the arm, however, is IP20 and should not be submerged. Can the lamp be used on both 110 V and 220 V supplies? Yes, the unit supports 110–220 V operation, making the lamp compatible with common mains voltages in most regions. What cable length is supplied and is the lamp ready to install? The lamp is supplied with a 1.8 m cable, enabling immediate connection and straightforward installation without additional cabling. Is there a halogen option as well as the LED version? The product range includes halogen or LED versions; the LED variant offers 9 W efficiency and lower operating temperatures compared with halogen. Which Vertex model should be specified for procurement lists? Specify the VLED-400M SKU and GTIN 4061905088414 to ensure correct ordering of the LED inspection lamp from Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VLED-500S — Vertex waterproof LED work lamp, IP67, 9 W The VLED-500S is a robust, compact work lamp for industrial and workshop use, delivering splash‑proof illumination and flexible positioning for detailed assembly and inspection tasks. IP67 protection against dust and water 9 W LED for energy-efficient light 110V/220V dual-voltage compatibility Supplied with 1.8 m cable Consistent, bright light for precision work The VLED-500S provides reliable, shadow‑reducing illumination that supports accurate measurement and fine assembly. With a 9 W LED light source, the lamp produces steady, colour‑stable illumination while consuming minimal energy; this reduces heat generation and extends service intervals compared with filament options. The high ingress protection (IP67) ensures light output remains consistent even in dusty or wet production environments, contributing to fewer process interruptions and a measurable reduction in rejects during visual inspection tasks. The lamp’s compact form factor and low thermal footprint make it suitable for close‑up workbenches and machine‑tended inspection stations. Flexible mounting and targeted positioning for varied setups Designed with a single‑joint round arm, the lamp allows simple, repeatable repositioning for task‑specific illumination, from soldering and inspection to tool setting. The unit operates on 110V/220V supplies, enabling use across different regions and on mobile equipment without additional transformers. A 1.8 m cable is included, supporting easy integration into existing workstations and minimising the need for immediate rewiring. The combination of adjustable positioning and universal voltage support makes the lamp an adaptable asset for maintenance teams and production lines that require quick reconfiguration and minimal downtime. Durable construction that supports operational reliability Constructed for the workshop environment, this LED work lamp balances portability and robustness at 1.6 kg; it is simple to move yet substantial enough to remain steady during adjustment. The IP67 rating certifies protection against dust ingress and temporary immersion in water, offering tangible safety and compliance benefits in harsh or washdown conditions. Long service life of the LED module and the lamp’s sealed design reduce maintenance cycles and spare‑parts logistics, helping to lower total cost of ownership while maintaining safe, well‑lit work areas. Sourcing through an experienced distributor further improves supply reliability for production planners and procurement teams. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the VLED-500S into existing workstations and for prompt, reliable dispatch from our European stock Technical Data Article number: VLED-500S GTIN: 4061905005725 Protection class: IP67 Light output: 9 W (LED) Voltage: 110V/220V Weight: 1.6 kg Included accessory: Cable 1.8 m Arm: Single‑joint (round) Facts Weight: 1.6 kg Power: 9 W (LED) Voltage range: 110V/220V Cable length: 1.8 m Special features Waterproof design Single‑joint round arm for targeted positioning Supplied cable 1.8 m Brand: Vertex FAQ Is the VLED-500S suitable for wet environments? Yes. The VLED-500S carries an IP67 rating, which provides protection against dust ingress and temporary immersion in water, making the lamp suitable for washdown and splash‑prone areas. What voltage supplies does the lamp accept? The VLED-500S supports 110V/220V operation, enabling flexible use across different installations and regions without an external converter. Does the lamp come ready to install? The lamp is supplied complete with a 1.8 m cable, allowing immediate connection to the mains and straightforward mounting via its adjustable arm. How does the LED compare to halogen in workshop use? The LED version offers longer service life, lower heat emission and reduced energy consumption compared with halogen alternatives; the VLED-500S’s sealed LED module also requires less maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust IP67 protection combined with a low-energy 9 W LED and dual-voltage operation ensures dependable illumination in wet or dusty workshop environments; the integrated 1.8 m cable and compact arm simplify installation and reduce downtime. Order the VLED-500M through Metav Werkzeuge or consult the technical team for detailed specifications. VLED-500M LED Work Lamp by Vertex — IP67 waterproof, 9 W The VLED-500M is a compact, waterproof work lamp intended for industrial and workshop use, offering flexible supply voltages and a sturdy mounting arm for localised task lighting. IP67 waterproof protection 9 W LED energy efficiency Dual voltage 110V/220V compatibility Includes 1.8 m cable Durable illumination for harsh conditions The lamp’s IP67 rating guarantees resistance to dust and temporary immersion, making it suitable for wet production halls and outdoor workstations where resilience matters. Constructed for continuous operation in challenging settings, this lighting solution combines a sealed housing with a compact profile so that maintenance intervals are extended and unplanned downtime is reduced. The robust build supports reliable performance in environments that demand consistent, protected illumination. Low power consumption with wide voltage range Equipped with a 9 W LED module and compatible with 110V/220V mains, the unit delivers energy-efficient task lighting while remaining simple to integrate into different supply systems. The LED source minimises heat generation and offers longer service life compared with traditional lamps, which reduces replacement frequency and operating costs. This technical combination provides a practical balance of efficiency and performance for sustained workshop use. Simple installation and flexible mounting The lamp is supplied with a 1.8 m cable and fitted to a 220 x 220 mm rounded arm, enabling straightforward positioning above benches or machines without complex wiring. With a weight of 2.3 kg, the luminaire is heavy enough to remain stable yet light enough for safe handling during installation or repositioning. The included cable length and compact arm dimension favour rapid setup, lowering downtime during assembly or equipment changes. Trusted supply chain and reduced procurement risk Sourced from a recognised manufacturer and distributed via a specialist partner, this lighting solution benefits from a quality filter that supports consistent product standards and reliable availability. Metav’s role as a precision partner ensures items reach European workshops with transparent logistics and an established reputation; the company’s broad catalogue and longstanding customer base reflect a commitment to dependable supply and technical competence. Choose the Vertex VLED-500M for dependable IP67 workshop lighting — contact Metav Werkzeuge in Emmerich for specification support and availability Technical Data SKU: VLED-500M GTIN: 4061905005749 Type: Lampe Brand: Vertex Protection class: IP 67 Facts Power supply: 110V/220V Light output: 9 W (LED) Arm size: 220 x 220 mm (round) Cable length included: 1.8 m Weight: 2.3 kg Special features Waterproof Variants: Halogen or LED Supplied accessory: Cable 1.8 m FAQ What environments is this lamp suitable for? The VLED-500M by Vertex is designed for workshops and industrial areas where IP67 protection against dust and temporary immersion is required. Can the lamp be used with different mains supplies? Yes, the unit supports 110V/220V operation, allowing deployment across sites with varying supply voltages. Is the cable included and what length is it? The Vertex VLED-500M is supplied with a 1.8 m cable, simplifying installation at typical workbench heights. How heavy is the luminaire and does it require special mounting? The luminaire weighs 2.3 kg, enabling secure mounting on standard arms such as the supplied 220 x 220 mm rounded bracket without heavy-duty fixings. Are halogen options available alongside the LED version? The product range includes halogen or LED variants; the listed model features a 9 W LED light source. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable, energy-efficient lighting with a compact form and low weight for easy installation; combines 9 W performance with long service life for uninterrupted workshop use. Order the LED9W directly via Metav Werkzeuge or ask our consultants if needed. LED9W — 9 W LED bulb accessory by Vertex, energy-saving lighting for workshop and industrial applications The LED9W is a compact 9 W LED bulb intended as an accessory for LED lamps, offering efficient illumination where reliable, low-maintenance light is required Long service life reduces replacement frequency Low energy consumption with 9 W rating Compact, lightweight design at 0.19 kg Efficient performance that lowers operational load The 9 W rating of this lamp denotes a energy-efficient alternative to older lighting technologies, delivering comparable illumination while consuming significantly less power. For industrial and workshop settings, this efficiency translates into reduced running hours on electrical supply and a smaller environmental footprint. The built-in advantages of modern LED technology ensure steady light output without frequent fluctuations, which supports process reliability and a more consistent work environment. Designed for dependable, low-maintenance operation This bulb emphasises long service life and low maintenance, reducing downtime for replacements and freeing maintenance resources for other tasks. The solid-state construction typical of LED solutions minimises fragile components and offers stable performance over extended periods. For operations where continuity matters, selecting durable lighting components contributes to predictable scheduling and fewer interruptions to production or workshop routines. Practical handling and quicker installation in busy workshops Weighing only 0.19 kg, the lamp is compact and easy to handle during fitting and replacement, which speeds up installation cycles and reduces effort for technicians. The reduced mass makes it suitable for fixtures with limited load capacity or where repeated handling is required. Its form factor also supports flexible placement in localised task lighting or general area illumination, improving working conditions without complex adjustments. Compatibility and traceable supply for professional procurement Supplied as an accessory for LED lamps, the product is identified by SKU and GTIN for straightforward inventory management and procurement tracking. The clear product identification facilitates reorder processes and ensures that specifications match the intended application. Sourcing through a reliable distributor avoids supply gaps and supports the workshop’s demand for consistent, certified components. Request technical advice from Metav Werkzeuge for the Vertex LED9W 9 W bulb and arrange supply from our Emmerich site — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LED9W GTIN: 4061905090318 Type: 9 W bulb Facts Power: 9 W Weight: 0.19 kg eClass: 27110390 Special features Accessory for LED lamps Category: Vertex Asset available: LED9W-main.png FAQ What fixtures is this lamp compatible with? The LED9W is suitable as an accessory for LED lamps and can be fitted into compatible LED fixtures that accept a 9 W bulb specification How does the energy consumption compare to older bulb types? The 9 W rating of the LED9W indicates significantly lower energy use compared with traditional incandescent solutions, providing energy savings and reduced electrical load What maintenance can be expected with this bulb? The LED9W offers extended service life and low maintenance requirements, reducing the frequency of replacements and associated downtime Is the weight important for installation? Yes — at 0.19 kg the LED9W is lightweight, which simplifies handling and installation, particularly in fixtures with limited support or where repeated servicing occurs How can this item be reordered for a workshop supply chain? Reorders can be managed using the article number LED9W and GTIN 4061905090318 to ensure the correct SKU is supplied Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

SZM-LED2 Stereomikroskop Trinokular mit Säulenstativ, LED-Beleuchtung

Technische Daten: Bezeichnung: LED-Lampe Vollhartmetall IP-Schutz: IP 20 Gewicht: 1,2 kg - 2 kg Winkel: 24° Arm: 220x310mm bis 500mm Leistung: 110V/220V - 220V Lichttemperatur: 6500 K Licht: 12V/6W Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.

Nach IP67 zertifiziert und somit staubdicht und gegen zeitweiliges Untertauchen geschützt. Diese Eigenschaften machen die LED-Maschinenlampe besonders langlebig und widerstandsfähig gegen Schmutz und Feuchtigkeit. Ob in der Industrie, im Handwerk oder in anderen anspruchsvollen Anwendungen - das Werkzeug bewahrt seine Funktionalität selbst in rauesten Umgebungen. Technische Daten: Bezeichnung: LED-Maschinenlampe VHM IP-Schutz: IP 67 Besonderheit: 3 Arten zur Befestigung: Magnet, Haken und Stand Geeignet für: 12 W Glühbirne oder 7,5 W Glühbirne je nach Ausführung Gewicht: 0,61 kg - 3,5 kg Länge: 300 mm bis 734 mm Winkel: 120° Leistung: 100V-240V Lichttemperatur: 5300 K Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.