Stable stands for precision in metrology
Stands for granite surface plates and control plates provide a rigid, low-vibration foundation that ensures reproducible measurement setups and faster, more reliable quality checks. Designed for inspection, assembly and toolroom tasks, these stands maintain the flatness of a granite plate and support ergonomic working heights to reduce operator fatigue and throughput times. Built from sturdy steel constructions, they deliver long-term dimensional stability, simplify the alignment of gauges and fixtures and help lower scrap rates by enabling consistent test setups. The combination of a dedicated stand and a granite surface plate creates a dependable system for precision inspection, repeatable calibration and efficient production quality control.
1000x1000x100/150mm Anti-Slip Mounting Plate for Measurement Tables, For Caliper-Compatible Platen - Filetta
Take advantage of a secure anti-slip solution that is compatible with large measuring plates and speeds up setup time; the combination of improved measurement repeatability, robust plate-frame compatibility and simple fitting supports reliable inspection routines. Order the unit via Metav Werkzeuge or request consultant advice for integration into existing metrology benches. Rutschsicherung — Anti-slip device for measuring plate frames, compatible with 1000×1000×100–150 mm plates (Filetta) Rutschsicherung provides a secure bearing that prevents lateral movement of measuring plates on plate frames and supports precise, repeatable positioning in workshop and inspection environments Secure anti-slip surface for measuring plates Designed for 1000×1000×100–150 mm plates Simple installation on plate frames Enhances measurement repeatability Secure base for consistent, repeatable measurements A dedicated anti-slip bearing reduces micro‑movements that otherwise introduce scatter into dimensional checks. By stabilising the measuring plate on the support frame, the device contributes directly to improved measurement repeatability and fewer retests in standard inspection routines. The function is particularly valuable in metrology and inspection stations where even small lateral shifts can affect tolerance assessments and traceability records. Built for plate-frame compatibility and fast fitting Engineered to match measuring plates with dimensions 1000×1000×100–150 mm, the unit integrates with common plate-frame geometries used in metrology tables. The straightforward mounting concept shortens setup time and reduces fixture adjustments between measurements, which translates into higher throughput for repetitive checks. Compatibility with standard plate formats also eases inventory management for workshops and quality labs. Workflow benefits and integration into inspection benches The device is intended for industrial metrology and messtisch applications where stability equals confidence in results. Its contribution to a reproducible measuring environment reduces rework and supports a smoother production flow. Sourcing through a specialist partner assures product traceability and consistent delivery quality, reinforcing the workshop’s capability to maintain steady inspection quality across shift changes. Contact Metav Werkzeuge for procurement details and to confirm compatibility with existing plate frames and metrology benches Technical Data Article number: MS131.130 Product: Rutschsicherung Suitable for: measuring plates 1000×1000×100/150 mm Manufacturer: Filetta Facts Compatible plate size: 1000×1000×100–150 mm Special features Anti-slip function for plate stabilisation For mounting on measuring plate frames Improves repeatable positioning during inspections FAQ What is the primary purpose of this anti-slip device? The anti-slip device secures measuring plates to the support frame to prevent lateral movement and to improve repeatability during inspection routines with measuring plates sized 1000×1000×100–150 mm. Is the anti-slip device compatible with other plate sizes? The product is specified for measuring plates with dimensions 1000×1000×100–150 mm; compatibility with other sizes depends on frame geometry and should be checked prior to procurement. How does the anti-slip device affect measurement throughput? By reducing the need for position corrections and repeat measurements, the device contributes to faster setup and higher throughput in routine inspection processes. Can the anti-slip unit be retrofitted to existing messtisch frames? Retrofitting is typical where frame geometry matches the device’s mounting concept; technical checks are recommended to confirm fit on existing assemblies. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1000x630mm Stand With Drawer Storage, Adjustable Feet, Solid Steel Frame 60x60mm - Metav IndustryLine
Take advantage of a robust support that combines solid construction, precise levelling and organised accessory storage for reliable measurement setups; order the frame directly via Metav Werkzeuge or contact our consultants for product guidance. Frame with Drawers for Granite Plate M206.121 — solid 60×60 mm steel, adjustable levelling the Frame with Drawers for Granite Plate M206.121 is a sturdy support for workshop and inspection tables, designed to carry standard granite plates and to keep measuring accessories organised Solid 60×60 mm steel square tube Integrated drawers for accessory storage Adjustable levelling screw (up to 10 mm) Suitable for granite plates up to 1000×630 mm Built for stable measuring surfaces and reproducible results The frame is manufactured from solid steel square tube with a 60×60 mm profile and 2 mm wall thickness, which translates into high stiffness and long-term dimensional stability under workshop conditions. That rigid construction reduces unwanted deflection and vibration, ensuring that a mounted granite plate remains a reliable reference surface for precision work. The design concentrates on delivering repeatable setups, which shortens inspection preparation times and supports consistent quality control workflows. Practical organisation integrated into the support Built-in drawers provide immediate benefits for daily operation: stored probes, gauges and small tools are kept at hand and protected from dust while remaining easy to access. The integrated storage minimises movement around the measuring station, which reduces the risk of accidental knocks to the granite surface and improves process efficiency. Where space and workflow matter, this practical feature supports a tidier workstation and faster inspection cycles. Precise adjustment for uneven floors Height differences are compensated via the levelling screw, which offers an adjustment range of up to 10 mm, enabling accurate alignment of the granite plate even on imperfect floors. Fine levelling reduces measurement uncertainty that would otherwise arise from uneven supports and makes initial set-up quicker. The levelling mechanism is straightforward to operate and keeps the plate orientation stable once adjusted, helping to maintain measurement integrity throughout the working day. Compatibility with common granite plate formats The support is specified for standard granite plate dimensions commonly used in workshops and metrology labs. It is suitable for plates measuring 630×400×100 mm, 630×630×100 mm, 800×850×100 mm and up to 1000×630×100 mm, allowing flexible selection of the reference surface to match the parts and fixtures in use. This compatibility makes the support a versatile choice for machine shops, toolrooms and inspection areas that rely on different plate sizes for varied tasks. Contact Metav Werkzeuge today for availability, bespoke advice and delivery details from our Emmerich team Technical data Article number: M206.121 GTIN: 4054469183046 Manufacturer: Metav IndustryLine Facts Material: solid steel square tube 60×60 mm, wall thickness 2 mm Weight: 24 kg Dimensions (frame): 614 × 409 × 710 mm Overall height: 810 mm Levelling range: up to 10 mm Special features Integrated drawers for accessory storage Suitable for granite plates: 630×400×100 mm; 630×630×100 mm; 800×850×100 mm; 1000×630×100 mm Foot with levelling screw for height compensation FAQ Which granite plate sizes does the frame accept? The frame accepts granite plates in the sizes 630×400×100 mm, 630×630×100 mm, 800×850×100 mm and 1000×630×100 mm as specified for the Frame with Drawers for Granite Plate M206.121 What is the frame made from? The Frame with Drawers for Granite Plate M206.121 is made from a solid steel 60×60 mm square tube with a 2 mm wall thickness, providing the rigidity required for precision measuring setups How is levelling adjusted on the support? Levelling is performed via an adjustable levelling screw that provides up to 10 mm of compensation, allowing the plate to be aligned accurately on uneven floors Are storage drawers included and what are they for? Yes, the support features integrated drawers for organised storage of small measuring accessories, probes and tools to keep the workstation tidy and reduce handling time What are the item number and weight of the support? The support is listed as M206.121 and has a weight of 24 kg; the GTIN is 4054469183046 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000x630x100/150mm Anti-Slip Pad For Measurement Table Plates - Filetta
Take advantage of a compact, reliable anti-slip solution that secures measurement plates with the dimensions 1000 x 630 x 100/150 mm, reduces lateral movement during set-up and inspection, and integrates easily with measurement plate frames and stands. Order the anti-slip device directly via Metav Werkzeuge or ask our consultants if needed. Anti-slip device for measurement plate frames by Filetta — fits 1000 × 630 mm plates A anti-slip device designed to hold measurement plate frames steady on workshop stands and inspection rigs, optimising repeatable set-ups for metrology tasks. Secure hold for 1000 x 630 mm measurement plates Designed for measurement plate frames and stands Robust anti-slip function for workshop environments Improved measurement repeatability through secure support A stable support surface is a prerequisite for precise inspection. The anti-slip device prevents unwanted lateral shift of the measurement plate, which reduces measurement scatter and the need for repeat runs. By limiting micro-movements during tactile or optical probing, the component supports consistent contact conditions and therefore enhances repeatability across multiple operations. This makes the solution particularly useful where fixed-fixture accuracy feeds directly into quality decisions. Fast, straightforward fitment for workshop workflows Fitting is engineered for practicality: the design integrates with existing measurement plate frames and associated stands, allowing teams to prepare jigs and plates quickly and return to production without lengthy rework. The compact format minimises set-up time while maintaining the required clamping stability. As a result, cycle times for inspection and alignment tasks are shortened and workshop throughput benefits from fewer interruptions and faster batch checks. Protects test routines without complex adjustments The device preserves the alignment and reference plane of the measurement plate during both static and dynamic checks. Because it is purpose-built for measurement plate frames, there is no need for additional fixtures or bespoke adaptors for the specified plate size. This focused compatibility reduces the scope for operator error and keeps the test procedure lean—improving the overall efficiency of calibration and quality-assurance workflows. Supply reliability and the Metav advantage Sourcing this Filetta anti-slip solution through Metav leverages a dependable European supply chain and hands-on specialist support from a supplier experienced in precision metrology. Metav’s offering aims to make high-precision accessories accessible across workshops and small production facilities, ensuring consistent availability and a straightforward procurement path. The practical combination of compatibility, quick fitment and supply reliability supports stable, long-term measurement processes. Contact Metav Werkzeuge for tailored advice on the Filetta anti-slip device and ensure measurement plate frames are secured precisely and promptly Technical Data Article number: MS131.127 Manufacturer: Filetta Category: Messtisch Facts Compatible plate dimensions: 1000 x 630 x 100/150 mm Intended use: Measurement plate frames and stands Special features Anti-slip function for measurement plate frames Designed for workshop and inspection environments Integrates with measurement plate stands FAQ Which plate dimensions are supported? The anti-slip device is designed for measurement plates sized 1000 x 630 x 100/150 mm (Filetta, SKU MS131.127). Can it be used with measurement plate frames and stands? Yes, the device is intended for use with measurement plate frames and compatible stands to provide stable support during inspection tasks. Will the anti-slip device improve repeatability? Yes, by preventing lateral movement of the plate, the device helps reduce variation between successive measurements and supports repeatable test conditions. Is this Filetta accessory suitable for workshop use? The design accommodates typical workshop and inspection environments where measurement plates are mounted on frames or stands. How is the item identified for ordering? Refer to SKU MS131.127 (Filetta) when enquiring or ordering through Metav Werkzeuge Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1200x800mm Granite Plate Stand With Storage Drawers, Adjustable Feet (±10mm) - Metav IndustryLine
Take advantage of a rigid steel frame, dependable levelling adjustment and integrated storage to keep measuring routines efficient and repeatable; order the Stand with Drawers for 1200 × 800 mm Granite Plate directly via Metav Werkzeuge or ask our consultants if needed. Stand with Drawers for 1200 × 800 mm Granite Plate — Steel Frame with Levelling Adjustment (Metav IndustryLine) The Stand with Drawers for 1200 × 800 mm Granite Plate is a heavy-duty metrology support designed to carry a 1200 × 800 × 150 mm granite surface plate and provide a stable, organised base for precision inspection and layout work. Solid 60 × 60 mm steel square tube frame Integrated drawers for accessory storage Levelling feet with 10 mm adjustment range Compatible with 1200 × 800 × 150 mm granite plates Stability that raises measurement quality A purpose-built support improves repeatability by offering a stable base for the granite surface plate. The frame is constructed from 60 × 60 mm steel square tubing with a 2 mm wall thickness, yielding the rigidity needed to resist deformation under load. At a weight of 31 kg, the unit minimises movement and helps maintain consistent contact between the plate and workpieces, which reduces the influence of external vibrations during inspections. The compact footprint (725 × 504 × 660 mm) keeps the setup accessible while ensuring the granite slab remains fully supported. Built-in organisation to streamline workflows Integrated storage simplifies day-to-day metrology tasks by keeping gauges and accessories at hand. The built-in drawers provide protected space for small tools and fixtures, enabling faster changeovers and fewer interruptions during quality checks. By combining a support frame and tidy storage, the design reduces the need for separate trolleys or benches, which saves floor space and shortens the time from setup to measurement. The clear organisation also contributes to safer handling of precision instruments, lowering the risk of accidental knocks or contamination. Precision levelling and workshop durability Uneven floors are a common source of measurement error; the levelling mechanism with a 10 mm adjustment range compensates for height differences and ensures the plate sits true. The levelling screw is designed for workshop robustness and simple fine-tuning so that the granite surface can be aligned quickly without special tools. The solid steel construction resists wear in industrial environments and is suitable for routine use in machining, inspection and toolroom settings. Compatibility with a 1200 × 800 × 150 mm granite plate makes this frame the practical choice for standard workshop metrology setups. Secure the Metav IndustryLine stand with drawers to ensure a stable metrology base — contact Metav Werkzeuge for tailored delivery options and expert advice. Technical Data Article number: M206.122 GTIN: 4054469183053 Weight: 31 kg Dimensions (L×W×H): 725 × 504 × 660 mm Overall height: 760 mm Core specifications Frame profile: 60 × 60 mm square tube, 2 mm wall thickness Levelling adjustment range: 10 mm Suitable for granite plate size: 1200 × 800 × 150 mm Features Integrated drawers for accessory storage Levelling screw to compensate height differences Solid steel construction for workshop durability FAQ Is this stand suitable for a 1200 × 800 mm granite plate? Yes. The Stand with Drawers for 1200 × 800 mm Granite Plate is designed specifically to accept granite plates measuring 1200 × 800 × 150 mm and to provide a stable metrology surface. What material is the frame made from and how robust is it? The frame is fabricated from 60 × 60 mm steel square tubing with a 2 mm wall thickness, giving the Metav IndustryLine M206.122 the rigidity required for regular workshop use. How is the stand levelled on uneven floors? Levelling is achieved via an adjustable levelling screw with an adjustment range of 10 mm, allowing accurate compensation for minor floor irregularities and improving measurement repeatability. Does the stand include storage for tools and accessories? Yes. The unit features integrated drawers for the organised storage of measuring accessories and small fixtures, helping to streamline inspection workflows. What are the unit dimensions and weight for planning a workspace? The frame measures 725 × 504 × 660 mm (L×W×H) with an overall height of 760 mm and weighs 31 kg, facilitating stable installation beneath a 1200 × 800 × 150 mm granite plate. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200x800x120/150mm Anti-Slip Stop For Measuring Plate Frames, Fits Mess Plates 1200x800x120/150mm - Filetta
Secure measurement plates reliably with targeted slip protection that matches 1200 x 800 x 120/150 mm plates; the simple fitting reduces setup time and improves repeatability on measuring plate stands. Order directly via Metav Werkzeuge or consult our specialists for application checks. Anti-slip pad for measuring plate stands — compatible with 1200 x 800 x 120/150 mm (Filetta) The Anti-slip pad provides secure, non-slip support for measuring plates on stands and frames, designed specifically for plates with dimensions 1200 x 800 x 120/150 mm Prevents plate movement during inspection Fits 1200 x 800 mm measuring plates Simple retrofit for standard stands Secure, slip-resistant contact surface Stable support for repeatable measurements The anti-slip solution increases repeatability by preventing lateral movement of the measurement plate during inspection and assembly tasks. By creating a defined interface between the plate and its support, the accessory reduces micro‑shifts that can lead to measurement scatter and rework. The direct effect is a more reliable measuring process, with fewer interruptions for realignment and a clearer traceability of measurement conditions. Fast compatibility checks and straightforward fitting Designed to match measuring plates with the dimensions 1200 x 800 x 120/150 mm, the pad allows quick verification of fitment on common plate stands. The product supports straightforward retrofitting on existing stands and frames, enabling immediate integration into workshop workflows. This compatibility reduces downtime and avoids the need for custom adapters, making the component a pragmatic addition to standard inspection setups. Safer handling and improved inspection workflow Integrating slip protection into the support system contributes to a calmer inspection environment and lowers the risk of accidental plate displacement during handling. The presence of a defined, slip-resistant contact layer helps maintain alignment during probing and optical checks, which in turn supports consistent measurement outcomes and a smoother quality assurance sequence. For tailored compatibility advice and prompt delivery from Emmerich, contact Metav Werkzeuge — our consultants will confirm fit and application for Filetta anti-slip pads Technical data Article number: MS131.129 Brand: Filetta Suitable for measuring plates: 1200 x 800 x 120/150 mm Data Fits plate dimensions: 1200 x 800 x 120/150 mm Category: Measuring table Special features Slip-resistant contact surface For measuring plate stands and frames Manufacturer: Filetta FAQ How does the anti-slip pad improve measurement accuracy? The anti-slip pad reduces micro-movements between the plate and stand, improving repeatability and lowering the chance of measurement errors when using Filetta MS131.129. Is the pad compatible with other plate sizes? This model is specified for 1200 x 800 x 120/150 mm measuring plates; compatibility with other sizes requires verification against the stand geometry. Can the pad be fitted to existing stands without modification? In most cases, the pad is designed for retrofit on standard stands and frames; checking the stand interface dimensions ensures proper seating for the Filetta product. Does the pad affect probing or tactile measurement methods? The slip-resistant contact layer is intended to stabilise the plate without impeding access for probes or contact sensors during inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1200x800x150mm Granite Plate Stand With Height Adjustment Screws, DIN 876/0 - Metav IndustryLine
Stable support for a 1,200×800×150 mm granite plate, constructed from solid steel square tube with integrated levelling screws; compatible with DIN 876/0 surface plates and supplied ready for installation — order directly via Metav Werkzeuge or consult our technical advisors if required. Stand for Granite Plate 1200×800×150 mm – Support Frame with Levelling Screws (Metav IndustryLine) The Stand for Granite Plate 1200×800×150 mm is a heavy-duty metrology support frame designed for inspection and measurement workstations, providing a stable base for a 1,200×800×150 mm surface plate. Solid steel square tube construction Levelling screws Ø21 mm included Suited for 1,200×800×150 mm plates Stable 24 kg base, total height 760 mm Reliable support for reproducible measurement results A firm and vibration‑resistant base is essential for accurate surface‑plate metrology. The frame’s solid steel square‑tube construction and 24 kg mass deliver a stable platform that reduces micro‑movement and increases measurement repeatability. Compatibility with DIN 876/0 plates ensures the assembly meets common workshop standards for flatness and reference use, so inspection and alignment tasks benefit from a dependable support that preserves the plate’s geometry during use. Fast levelling to compensate uneven floors Integrated levelling screws Ø21 mm allow rapid compensation of height differences and simple alignment on imperfect shop floors. The support includes adjustable feet with a functional range reflected in the product dimensions (725 × 503 × 760/660 mm), enabling users to achieve a level reference plane without complex shimming. This practical levelling approach shortens setup time and lowers the risk of systematic measurement error caused by an inclined base. Compact footprint that suits busy workshops With a footprint of 725×503 mm, the frame occupies minimal floor space while carrying a standard 1,200×800×150 mm surface plate. The conservative footprint and robust profile make the frame suitable for machine shops, quality control benches and toolrooms where space is at a premium but metrological performance cannot be compromised. The compact design eases integration into existing workstations and supports efficient workflow organisation. Clear delivery scope and workshop readiness The delivery comprises the support frame with levelling screws; it is supplied without the surface plate. The product is identified as SKU M206.109.1 and is designed for straightforward placement beneath a granite inspection plate. Weighing 24 kg, the frame is heavy enough to provide stability while remaining manageable for standard workshop handling and positioning. Accessories are limited to the included adjustment screws to keep installation simple and maintenance minimal. For robust metrology set-ups, request the Metav IndustryLine support frame via Metav Werkzeuge in Emmerich or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm suitability and delivery options Technical data Article number: M206.109.1 GTIN: 4054469103099 Label: Stand for granite plate 1200×800×150 mm Facts Weight: 24 kg Dimensions (footprint): 725 × 503 × 760 mm Height variant: 760/660 mm Compatible plate size: 1,200 × 800 × 150 mm Tariff number: 73084000 Special features Material: solid steel square tube Levelling screws Ø21 mm included Standard: DIN 876/0 Delivery scope: frame only, without surface plate FAQ Is the granite plate included with the support frame? The support frame is supplied without the surface plate; the delivery scope for the Metav IndustryLine stand covers the frame and levelling screws only. Can the frame be levelled on uneven floors? Yes, the stand features levelling screws Ø21 mm and adjustable feet to compensate height differences and achieve a horizontal reference plane. What plate size does the stand accept? The stand is compatible with a 1,200×800×150 mm granite surface plate and is dimensioned to support that format reliably. What material is the frame made from? The frame is fabricated from solid steel square tube, providing high rigidity and long-term dimensional stability. Does the frame conform to any metrological standard? The stand is intended for use with surface plates to DIN 876/0, aligning it with common flatness and reference standards for inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500x1000x150/200mm Anti-Slip Feet for Measuring Table Frames, For 1500×1000×150/200 or 2000×1000×200/250mm Tables - Filetta
Take advantage of secure positioning and reduced measurement uncertainty through a purpose-built anti-slip solution for measuring plate frames; its compatibility with common plate formats and straightforward retrofitting keeps inspection workflows efficient. Order or request specification support via Metav Werkzeuge for reliable delivery and technical advice. Anti-slip for measuring plate frames — secure support for industrial measuring plates (Filetta) The Anti-slip for measuring plate frames provides slip-resistant support for measuring plates used on inspection benches and messtables across manufacturing and metrology environments. Fits 1500×1000×150/200 mm measuring plates Compatible with 2000×1000×200/250 mm plates Prevents lateral movement during inspection Stable support that improves measurement reliability The primary benefit is a visible reduction in lateral movement during setup, delivered by a slip-resistant contact interface that maintains the plate position under normal handling and probing forces. This stability directly contributes to improved measurement accuracy and repeatability, since uncontrolled micro‑shifts at the workpiece interface are a common source of measurement scatter. The design focuses on secure seating rather than permanent fixturing, so repeat measurements remain comparable while handling remains flexible for inspection sequences. Compatibility that minimises installation time Designed for quick integration with common measuring plate formats, the unit supports 1500×1000×150/200 mm and 2000×1000×200/250 mm plates used on standard messtables. The compact footprint and straightforward mounting concept enable retrofitting to existing measurement plate frames with minimal downtime, preserving workshop throughput. The compatibility with typical industrial plate dimensions ensures that calibration jigs and inspection setups need few adjustments, safeguarding process continuity during upgrades or replacement cycles. Robust design for the workshop environment Built for continuous use in inspection and production areas, the component provides a durable contact surface that resists wear while maintaining its slip resistance properties over repeated cycles. Delivered under the Filetta brand, the product is intended for integration into measurement benches and inspection fixtures where handling speed and positional security matter. Supply via an established distributor acts as a quality filter for the European market, supporting consistent availability and predictable integration into existing metrology fleets. Contact Metav Werkzeuge in Emmerich for tailored guidance on Filetta anti-slip solutions and to request technical specifications or a quotation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: MS131.128 Manufacturer: Filetta Category: Messtisch Facts Compatible plate size: 1500 × 1000 × 150/200 mm Compatible plate size: 2000 × 1000 × 200/250 mm SKU: MS131.128 Special features Slip-resistant support for measuring plate frames Designed for inspection benches and messtables Simple retrofit installation FAQ How does the anti-slip unit affect measurement accuracy? The anti-slip unit for measuring plate frames reduces lateral movement at the plate interface and therefore lowers one common source of measurement variability; the Filetta anti-slip supports improved repeatability during inspection runs. Which plate sizes are supported by this solution? Supported formats include 1500×1000×150/200 mm and 2000×1000×200/250 mm, matching common industrial measuring plates for messtables and inspection benches. Can the anti-slip be retrofitted to existing measuring plate frames? Yes, the design permits straightforward retrofit to standard measuring plate frames, allowing integration into existing inspection setups with minimal adjustment. Is the unit suitable for continuous workshop use? The product is intended for industrial inspection environments and provides a durable, slip-resistant contact surface designed to withstand repeated handling and routine measurement cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
610x480x470mm Floor Cabinet With Three Drawers, Lock And Mounting Accessories - Filetta
Organised, secure storage with three drawers and an included lock improves workshop efficiency; the compact footprint (610 × 480 × 470 mm) is tailored to measuring benches. Order the Filetta MS131.113 via Metav Werkzeuge or contact our consultants for specification guidance. MS131.113 under-table cabinet — three-drawer unit by Filetta, compact footprint and secure locking The MS131.113 is an under-table cabinet designed for measuring benches and workshop use, providing secure, organised storage for tools and accessories close to the work surface Three drawers for organised tool storage Lock and fixings included for secure mounting Compact dimensions 610 × 480 × 470 mm Keep tools organised and within reach The under-table storage module offers three drawers sized to keep measuring tools and fixtures organised, reducing time spent searching for equipment and supporting continuous workflows. With a compact footprint of 610 × 480 × 470 mm, the unit fits neatly beneath a bench or alongside a measuring table, conserving floor space while maintaining immediate access to essentials. The layout supports clear separation of items, which simplifies calibration routines and daily checks. Designed for measuring benches and precision workflows Engineered for integration with a measuring bench, the cabinet aligns with typical workshop setups used in inspection and quality-control areas. The configuration helps preserve the order of gauges, stands and small instruments used during measurement tasks, so inspection cycles proceed more smoothly. By positioning storage at the bench, handling times are reduced and work routines become more efficient, contributing to reliable throughput in production or lab environments. Secure mounting and practical delivery contents Delivery includes a lock and the necessary fixings, enabling secure attachment to the bench or floor and providing theft protection for valuable instruments. The included fixings simplify installation and remove the need for additional mounting purchases, accelerating commissioning. The locking feature supports safe storage of calibrated items between shifts, helping maintain traceability and protecting investment in precision equipment. For secure, compact workshop storage choose the Filetta MS131.113 under-table cabinet—contact Metav Werkzeuge for ordering assistance or technical advice and benefit from local supply and expertise from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS131.113 Product: Under-table cabinet Brand: Filetta Dimensions: 610 × 480 × 470 mm Accessories included: Lock and fixings Special feature: 3 drawers Category: Measuring table (Messtisch) Facts Number of drawers: 3 Dimensions (W × D × H): 610 × 480 × 470 mm Special features Lock included Fixings included for mounting Designed for use with measuring benches (Messtisch) FAQ Is this cabinet suitable for mounting under a measuring bench? Yes. The Filetta MS131.113 under-table cabinet is designed to fit standard measuring benches and to provide convenient storage beneath the work surface. What are the exact dimensions of the unit? The cabinet measures 610 × 480 × 470 mm (width × depth × height), making it compact enough for most inspection and workshop tables. Does the delivery include a lock and mounting parts? Yes. Delivery of the MS131.113 includes a lock and the required fixings for secure mounting. How many drawers are provided and how does that help workshop organisation? The unit offers three drawers, which support separation of tools and gauges to speed up inspection routines and reduce handling time. Can the cabinet secure calibrated instruments between shifts? The integrated lock and sturdy construction of the Filetta MS131.113 enable secure storage of calibrated items, helping to protect instruments and maintain traceability. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
630x400–1000x630mm Adjustable Three-Point Frame For Gauge Plates, Height 810mm - Metav IndustryLine
Take advantage of a rigid, low-vibration support that adapts to multiple plate formats and speeds up inspection set-up; the combination of three adjustable main support points and adjustable levelling screws delivers reproducible measurements with straightforward alignment — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Flexible stand for measuring and inspection plates »M206.108.2« — three adjustable supports, solid square‑tube frame (Metav IndustryLine) The Flexible stand for measuring and inspection plates is a workshop-grade frame designed to carry and align inspection plates for measuring and quality control tasks in production and maintenance environments. Three adjustable main support points Solid square-tube construction Adjustable levelling screws Fits 630x400 to 1000x630 mm plates Stable support for reproducible inspection results A solid square‑tube frame provides the torsional rigidity required for reliable metrology setups. With a mass of 28.5 kg, the frame resists unwanted vibration and displacement during probing or manual checks, while its nominal overall height of 810 mm gives a practical working elevation for benches or trolleys. The sturdy construction reduces the risk of deflection under load, which improves repeatability of measurements and helps maintain the reference condition of mounted plates and fixtures. Fast adaptation to different plate formats The design includes three adjustable main support points that can be repositioned to match the support pattern of common inspection plates. This flexibility allows one frame to accommodate plate dimensions from 630x400 mm up to 1000x630 mm, cutting changeover time and avoiding the need for multiple dedicated stands. The movable supports ensure that contact occurs beneath the plate’s primary support zones, preserving plate flatness and ensuring consistent results during dimensional checks. Precise levelling for accurate alignment Integrated levelling screws on the feet permit fine adjustment of the frame to achieve exact horizontal alignment. This mechanical levelling capability simplifies setup before measurement and reduces systematic error originating from tilt. The combination of coarse support positioning and fine foot adjustment means the frame delivers both quick configuration and the small corrections necessary for reproducible measurements in a routine inspection workflow. Workshop-ready design that eases handling and integration Constructed from massive square‑tube material and finished for industrial use, the frame is heavy enough to be stable yet compact enough for workshop handling. It accepts commonly used inspection plates and mates easily with metrology benches or mobile inspection trolleys. The open design provides unhindered access for gauges, calipers and digital probes while the robust feet and adjustment range make it simple to integrate into existing quality-control processes. For tailored metrology solutions based on Metav IndustryLine components, contact Metav Werkzeuge for product matching and procurement: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M206.108.2 GTIN: 4054469184883 Manufacturer: Metav IndustryLine Overall height: 810 mm Weight: 28.5 kg Dimensions: 614 x 409 x 710 mm Compatible plate sizes: 630x400, 630x630, 800x500, 1000x630 mm Special features Three movable main support points for different plate sizes Feet with adjustable levelling screws Massive square-tube construction Intended for measuring and inspection plates FAQ What plate sizes can the stand accommodate? The stand accommodates inspection plates with formats from 630x400 mm up to 1000x630 mm; the three movable support points make these configurations possible with the Metav IndustryLine frame (SKU M206.108.2). How is levelling achieved on uneven floors? Fine levelling is provided by adjustable levelling screws on the feet; these permit precise horizontal alignment for reproducible measurements when using the Metav IndustryLine measuring stand. Is the frame sturdy enough for shop-floor use? Yes — the frame’s massive square‑tube construction and a weight of 28.5 kg provide stability and low susceptibility to vibration, making it suitable for routine inspection tasks and workshop integration. Can the support points be repositioned without tools? The main support points are designed to be repositioned for different plate sizes; the mechanism allows practical reconfiguration to match plate support patterns and speed up changeovers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x500x100mm Anti-Slip Pad for Measuring Plate Frames, Fits Measuring Plate Stands - Filetta
Take advantage of a stable, low-maintenance anti-slip solution that secures measuring plates while maintaining repeatability in routine inspection tasks; compatible with 800 x 500 x 100 mm plates and supplied by Filetta. Order the anti-slip guard directly via Metav Werkzeuge or ask the consultants for specification support. Anti-slip guard for measuring plate frames by Filetta — fits 800 x 500 x 100 mm The anti-slip guard is a retrofit accessory designed to prevent lateral movement of measuring plates and to improve the reliability of measurements on a measuring table. Secure anti-slip contact for measuring plates Compatible with 800 x 500 x 100 mm plates Suitable for measuring table frames Improved measurement reliability through stable contact The primary benefit of the anti-slip guard lies in its capacity to reduce micro-movements between the measuring plate and its support. By increasing the friction interface where the plate rests, the accessory improves repeatability of successive measurements and minimises rework caused by shifting parts. For metrology teams and workshop quality control, this translates into fewer measurement rejects and a more predictable inspection workflow. The solution is particularly relevant where plates are handled frequently or where small shifts can exceed tolerance bands. Practical integration into the measuring table workflow Designed for use with plates sized 800 x 500 x 100 mm, the guard integrates with common measuring table frames without demanding complex modifications. Installation is straightforward and focuses on mechanical fixing points on the plate frame; thread and mounting details depend on the specific table design. As a result, the measure of effort to retrofit the accessory remains low while the operational gain — stable part positioning on the measuring table — is immediate. The compact form factor keeps the working surface unobstructed and maintains accessibility for standard inspection tools. Productivity gains and quality assurance advantages Adopting this anti-slip solution supports faster setup times and a reduction in incidental errors during tactile or optical measurement processes. The emphasis on stable fixturing supports consistent datum alignment and therefore contributes directly to measurement confidence. In a production environment the accessory enhances throughput by lowering the incidence of repeated measurements and by shortening inspection cycles. The supplied SKU MS131.125 identifies the exact item and facilitates procurement and traceability in inventory systems. Contact Metav Werkzeuge today for Filetta anti-slip guards compatible with 800 x 500 x 100 mm measuring plates — expert ordering assistance and specification advice available by email or phone from Emmerich. Technical data SKU: MS131.125 Article: Anti-slip guard Manufacturer: Filetta Category: Measuring table Suitable for measuring plates: 800 x 500 x 100 mm Facts Compatible plate dimension: 800 x 500 x 100 mm SKU identifier: MS131.125 Special features For measuring plate frames Anti-slip function for improved repeatability Retrofit-friendly design FAQ What plate sizes is the anti-slip guard compatible with? The anti-slip guard is designed for measuring plates with the dimension 800 x 500 x 100 mm and is supplied under SKU MS131.125 by Filetta. Will the accessory affect the measuring surface or reference points? No — the anti-slip guard secures the plate to the frame without altering the measuring surface; Filetta designed the unit to maintain existing reference geometry while reducing lateral movement. Can the anti-slip guard be retrofitted to any measuring table frame? The guard is intended for standard measuring table frames; compatibility with bespoke fixtures should be checked against the SKU MS131.125 mounting arrangement before installation. How does the anti-slip guard improve inspection throughput? By preventing plate movement, the guard increases repeatability and reduces the need for re-measurement, which shortens inspection cycles and supports steadier production yields. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
850-925mm Measuring Plate Stand With Three Supports, Two Anti‑Tilt Locks - Filetta
Benefit from a robust support frame, adjustable height options and integrated anti‑tilt fittings to secure a stable measuring base; order the Surface plate stand directly via Metav Werkzeuge or consult Metav’s specialists for configuration advice. MS131.202 Surface plate stand by Filetta — adjustable height and anti‑tilt protection The MS131.202 Surface plate stand provides a stable support frame for precision surface plates in metrology workshops, combining ergonomic height ranges with secure fixing elements for reliable, repeatable measurement setups Adjustable heights 850–925 mm for varied setups Anti‑tilt locks for secure plate fixation Levelling feet with metal caps for stable support Engineered stability for repeatable measurements A stable measuring base is essential for comparable results. The stand’s design delivers a robust support frame that minimises vibration and lateral movement during inspection work, so readings remain consistent across cycles. Built for industrial metrology, the frame suits surface plates used in quality control and assembly processes and reduces rework by keeping the reference plane steady throughout measurement sequences. Fast set‑up and secure fixation for busy shops Included with the stand are 3 support struts (Bessel style), 2 anti‑tilt locks and levelling feet fitted with metal caps, allowing rapid installation and secure mechanical retention of the surface plate. These fittings shorten preparation time and remove guesswork when locating the plate, which translates into a quicker inspection throughput and fewer interruptions on the shop floor. Flexible heights to match different workflows Three height ranges are available—850–875 mm, 870–895 mm and 900–925 mm (including surface plate)—so the support can be matched to plate thickness and operator ergonomics or integrated equipment. The adjustable heights enable comfortable working postures and straightforward alignment with peripheral tools, helping to cut operator fatigue and maintain productivity in repeated measuring tasks. Workshop‑ready design that supports quality routines The stand is specified for workshop use and fitted with practical features that withstand daily handling: levelling feet with metal caps protect floors and provide fine height adjustment, while anti‑tilt devices add a layer of safety when loading heavy plates. Supplied accessories ensure the support is ready for immediate integration into measuring benches and laboratory tables, helping to safeguard measurement quality from the start. For a dependable, height‑adaptable measuring station configured to exact workshop needs, contact Metav Werkzeuge to discuss the Filetta MS131.202 and arrange supply from Emmerich. Technical data Article number: MS131.202 Manufacturer: Filetta Category: Messtisch (measuring table) Height (including surface plate): 850–875 mm / 870–895 mm / 900–925 mm Included accessories: 3 support struts (Bessel style); 2 anti‑tilt locks; levelling feet with metal caps Facts Height ranges: 850–875 mm; 870–895 mm; 900–925 mm Special features Anti‑tilt protection Levelling feet with metal caps 3 support struts (Bessel style) FAQ Is the stand suitable for different surface plate thicknesses? Yes. The stand’s three height ranges (850–875 mm, 870–895 mm, 900–925 mm including plate) allow adaptation to different surface plate thicknesses and workshop workflows for the MS131.202 by Filetta. Which accessories are supplied with the stand? The MS131.202 is supplied with three support struts (Bessel style), two anti‑tilt locks and levelling feet with metal caps for immediate installation and secure plate fixing. Can the stand be used in a quality control laboratory? Yes. The support frame is designed for metrology applications and provides a stable measuring base suitable for quality control benches and inspection areas. How does the anti‑tilt feature improve safety? The anti‑tilt locks secure the surface plate against accidental tipping during loading or adjustment, reducing the risk of damage to the plate and ensuring a safer working environment. Is the stand compatible with standard measuring tables? The MS131.202 is categorised for measuring table use and is compatible with common workshop and laboratory arrangements where a stable, height‑adjustable surface plate support is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
850-925mm Measuring Table Stand With Three Supports, Tilt Locks And Metal-Capped Feet - Filetta
A robust, height‑adjustable stand that pairs stable support with practical safety features: choose the model that matches your working height and benefit from the included three bracing supports, two anti‑tilt locks and adjustable feet with metal caps for reproducible inspection results; order via Metav Werkzeuge or consult their specialists for application guidance. Measuring plate stand MS131.203 — height‑adjustable surface plate support by Filetta The Measuring plate stand MS131.203 is a floor stand designed to support a surface plate while providing two selectable working‑height ranges for inspection and metrology tasks. Height ranges 850–875 mm or 900–925 mm Three bracing supports (Bessel‑style) Two anti‑tilt safety locks Adjustable feet with metal caps Stable, adjustable support that preserves measurement accuracy A purpose‑built stand for metrology environments, the MS131.203 provides a stable support platform that reduces sources of error during inspection. The supplied height options (850–875 mm and 900–925 mm, including the measuring plate) allow ergonomic alignment with existing benches and measuring devices. By combining a rigid frame with bracing supports, the assembly helps maintain the flatness and orientation of the surface plate under typical workshop loads, which contributes directly to repeatable measurements and fewer rework cycles. Built for workshop efficiency and safe operation Safety and day‑to‑day convenience are integrated: the stand includes two anti‑tilt locks and three bracing supports to prevent accidental movement during measurements, while adjustable feet with metal caps permit stable levelling on imperfect floors. These features cut setup time and reduce the need for temporary shimming, so inspection processes run more smoothly. The mechanical simplicity of the design also minimises maintenance requirements, enabling focused metrology work without frequent adjustments. Fits inspection benches and precision workflows Designed as a support for surface plates in laboratories, workshops and quality control stations, this stand integrates easily into existing inspection layouts. The Filetta build supports conventional surface‑plate sizes and is suited to repeatable tasks such as dimensional checks, fixture set‑up and component inspection. The combination of stable construction and adjustable height translates into improved operator ergonomics and a more efficient measurement workflow, making it a pragmatic choice for production and QC environments where reliability and uptime matter. For expert advice on integrating the Filetta measuring plate stand into a workshop, contact Metav Werkzeuge in Emmerich for tailored guidance and efficient delivery Technical data Article number: MS131.203 Name: Measuring plate stand Brand: Filetta Height: 850–875 mm / 900–925 mm (including measuring plate) Accessories included: 3x bracing supports (Bessel‑style), 2x anti‑tilt locks, adjustable feet with metal caps Core technical data Height ranges: 850–875 mm; 900–925 mm Bracing supports: 3 pieces Anti‑tilt locks: 2 pieces Special features Application: support for surface plates and inspection setups Design: floor stand / tripod‑style bracing Levelling: adjustable feet with metal caps FAQ What working heights are available with this stand? The Measuring plate stand MS131.203 by Filetta offers two working‑height bands: 850–875 mm and 900–925 mm, stated values include the measuring plate. Which accessories are supplied with the unit? Delivery of the MS131.203 includes three bracing supports (Bessel‑style), two anti‑tilt locks and adjustable feet fitted with metal caps. Is the stand suitable for fixed installation in a metrology lab? Yes, the stand is designed to support surface plates for inspection and metrology tasks and is appropriate for lab or workshop installation where a stable support is required. Can the stand be levelled on uneven floors? Level adjustment is achieved via the adjustable feet with metal caps, allowing stable positioning on non‑uniform surfaces. Does the stand prevent accidental tipping during measurement? The MS131.203 is supplied with two anti‑tilt locks and three bracing supports to enhance stability and reduce the risk of accidental movement during inspections. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
850–925mm Measuring Table Frame For 2000x1000x200/250mm Plates, With Supports And Tilt Locks - Filetta
Combine robust support for large measuring plates with thoughtful workshop ergonomics: the stand offers reliable stability for 2000×1000 measuring plates, an adjustable height range for ergonomic setup and an inclusive accessory package for safe, immediate installation. Order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Surface plate stand MS131.204 — rigid support for 2000×1000 mm plates, adjustable height A Filetta surface plate stand designed for 2000×1000×200/250 mm measuring plates, delivering stable support and safe handling in industrial workshops Stable support for 2000×1000 mm plates Adjustable height 850–925 mm incl. plate Includes 3 supports, 2 tipping guards, levelling feet Not suitable for base cabinet use Stable foundation for precision measurement A robust surface plate stand provides the foundation for reproducible measurement results. The MS131.204 is configured for 2000×1000×200/250 mm plates and is engineered to minimise vibration and flexing during use, which preserves the flatness of the measuring surface. By combining a rigid frame with defined support points, the stand reduces measurement scatter and shortens setup time, making it suitable for quality control benches and assembly areas where consistent readings are essential. Ergonomic height and workshop integration Two height settings are accommodated in the design, providing an adjustable height range of 850–875 mm and 900–925 mm (both ranges stated including the measuring plate). This flexibility allows the stand to suit different working postures and bench layouts while keeping the measuring surface at an optimal eye level. The controlled height options aid operator comfort and reduce handling time when transferring parts between fixtures or test stations, contributing to steady workflow and fewer handling errors. Ready-to-use accessories and safe handling Delivered with a practical accessory pack, the stand includes three support braces (Bessel), two tipping protections and levelling feet with metal caps, enabling secure positioning and rapid installation. These items minimise the need for additional purchases and support a safe working environment by preventing accidental tilt and ensuring the frame sits true on uneven floors. Note that the frame is specified as not suitable for base cabinet integration; it is intended as a free-standing support for large surface plates. Choose the Filetta surface plate stand for a dependable metrology base and contact Metav Werkzeuge in Emmerich for tailored procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MS131.204 Name: Messplattengestell (surface plate stand) Manufacturer: Filetta Facts Compatible plate size: 2000×1000×200/250 mm Height (including plate): 850–875 mm / 900–925 mm Special features 3 support braces (Bessel) 2 tipping protections Levelling feet with metal caps Not suitable for base cabinet use FAQ What plate dimensions are compatible with this stand? The MS131.204 surface plate stand is designed for 2000×1000×200/250 mm measuring plates and supports the specified plate thicknesses for reliable bearing. Is the height adjustable to suit different operators? Yes, the stand offers two height settings—850–875 mm and 900–925 mm including the plate—so bench height and ergonomic requirements can be matched. Which accessories are supplied with the stand? Delivery includes three support braces (Bessel), two tipping protections and levelling feet with metal caps to ensure stability and safe installation. Can the stand be used with an under-shelf or base cabinet? No, the design is explicitly not suitable for base cabinet installation; it is intended as a free-standing support frame. Who manufactures this measuring table stand? The stand is produced by Filetta; the MS131.204 is specified and supplied for industrial metrology applications. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
900x600x100mm Anti-Slip Pad For Measuring Table Plate Support - Filetta
Take advantage of a secure, non-slip support that is matched to the common measuring plate size 900 x 600 x 100 mm and designed to improve repeatability on inspection tables; order the anti-slip protection directly via Metav Werkzeuge or consult Metav’s specialists for tailored advice. Anti-slip protection for measuring plate frames — compatible with 900 x 600 x 100 mm plates | Filetta The Anti-slip protection for measuring plate frames provides a stable interface for measuring plates and inspection tables, preventing unwanted movement during setup and measurement tasks while fitting standard frame designs. Secure anti-slip interface for measuring plates Designed for 900 x 600 x 100 mm plates Robust fit for measuring table frames Secure foundation for consistent measurements A stable base reduces variability in every measurement operation: the anti-slip device creates a controlled contact layer between the measuring plate and its frame, lowering the risk of lateral movement and therefore improving repeatability in routine checks. Matched specifically to the 900 x 600 x 100 mm plate geometry, the component is intended for metrology environments where consistent positioning influences traceable results. Designed for use on measuring tables and inspection stands, it supports accurate alignment without altering the plate geometry or clamping strategy. Seamless integration with frames and stands to speed setup Installation is conceived as a straightforward positioning on the plate frame so that time spent on alignment and re‑adjustment is reduced and throughput is increased. The solution is compatible with common measuring table constructions and support stands, providing a robust fit that limits micro‑shifts during probe contact or manual handling. As a practical accessory in a workshop or inspection bay, it contributes to smoother process flows and fewer repeat measurements, which in turn supports productivity and operational reliability. Durable support that protects components and workflow Built to serve as a repeatable interface, the anti-slip protection reduces abrasion and protects the plate surface during routine use and handling. The product’s role in minimising rework and stabilising setups makes it a simple, cost‑effective measure to safeguard quality gates in assembly and inspection operations. Supplied by a specialist metrology brand and distributed through Metav’s quality filter in Emmerich, the part is intended to integrate into established measurement routines and to support dependable material handling across shifts. Contact Metav Werkzeuge for guidance on integrating the Filetta anti-slip solution MS131.126 into existing measuring table setups and for supply details via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: MS131.126 Manufacturer: Filetta Product name: Anti-slip protection Suitable for: measuring plates 900 x 600 x 100 mm Category: Measuring table Numbers / Core technical data Compatible plate dimensions: 900 x 600 x 100 mm Designs / Special features Anti-slip surface for plate-to-frame contact Intended for measuring plate frames and stands Suitable for inspection table applications FAQ Is this anti-slip protection compatible with plates other than 900 x 600 x 100 mm? The anti-slip protection is manufactured for measuring plates sized 900 x 600 x 100 mm; compatibility with other sizes is limited and may require a different accessory. How does the anti-slip protection improve measurement repeatability? By providing a non-slip interface between the plate and its frame, the accessory reduces lateral movement and micro-shifts, which helps maintain repeatability during probing and visual inspections with the Filetta anti-slip protection MS131.126. Can the anti-slip protection be used on any measuring table frame? The design is intended for typical measuring table frames and supports; it fits standard frame geometries used for inspection tables and stands, ensuring a robust fit where plate dimensions match. Does the product include mounting hardware? The Filetta anti-slip protection MS131.126 is supplied as the anti-slip component itself; any additional fastenings or frame-specific adapters are not included unless stated separately by the supplier. Who distributes this anti-slip protection in Europe? The anti-slip protection MS131.126 is distributed via Metav Werkzeuge and specialist metrology channels for reliable supply and quality assurance. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
900–975mm Measuring Plate Stand With 3 Supports, Tilt Locks And Metal‑Fitted Feet - Filetta
Stable, height-adjustable support with anti-tilt locks and three support brackets provides a dependable base for surface plates, improving repeatability in inspection tasks. The adjustable feet with metal caps permit precise levelling on uneven floors. Order via Metav Werkzeuge or consult our specialists for application guidance and supply. Surface Plate Stand MS131.201 — Filetta height-adjustable metrology frame The Surface Plate Stand MS131.201 offers a stable, height-adjustable frame for secure mounting of measuring plates in metrology, inspection and workshop environments. Height-adjustable 900–975 mm overall Anti-tilt safety devices included Three support brackets supplied Adjustable feet with metal caps Engineered for stable, repeatable measurements The stand is designed to deliver stable support for measuring plates, reducing variability in routine inspections. With two selectable overall height ranges (900–925 mm and 950–975 mm, measured including the measuring plate), the frame enables ergonomic working heights and consistent positioning of inspection artefacts. Built to hold a flat measuring surface securely, the structure combines load distribution and low centre-of-gravity to reduce micro-movements during tactile or optical checks. That predictable behaviour translates into more repeatable readings and fewer re-measurements on the shop floor. Accessories that speed up setup and increase safety Included with the frame are three support brackets (Besselsche), two anti-tilt locks and adjustable feet with metal caps, which minimise the need for additional components. The support brackets simplify the seating of the plate and aid in fine alignment; the anti-tilt locks secure the assembly during handling and maintenance, lowering the risk of accidental displacement. The adjustable feet allow precise levelling on uneven surfaces, while the metal caps protect floor finishes and provide reliable contact points. These features shorten commissioning time and reduce logistical effort during installation. Practical benefits for workshops and inspection labs This Filetta frame is suitable for quality-control benches, calibration areas and precision workshops where a stable base and correct working height are essential. The clear height ranges and solid support arrangement make the frame a pragmatic choice for teams aiming to standardise inspection procedures. The robust design supports routine metrology processes, from layout and visual checks to probing and comparative measurements, contributing to consistent part acceptance and fewer process interruptions. Integration and workplace considerations The stand is categorised for use with surface plates and bench-mounted measuring setups and is compatible with a wide range of plate sizes where the specified overall height is required. The included mounting and safety hardware reduce the need for bespoke fittings, making the frame an economical centrepiece for a measuring table or inspection station. Its straightforward architecture supports straightforward maintenance and, where necessary, rapid relocation within a production environment. For secure, height-adjustable support choose the Filetta Surface Plate Stand and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply Technical Data Article number: MS131.201 Brand: Filetta Category: Measuring table / surface plate stand Height (including measuring plate): 900–925 mm / 950–975 mm Included accessories: 3 x support brackets (Besselsche), 2 x anti-tilt locks, adjustable feet with metal caps Core technical data Height range option 1: 900–925 mm Height range option 2: 950–975 mm Support brackets: 3 Anti-tilt locks: 2 Special features Height-adjustable frame for measuring plates Anti-tilt safety devices for secure handling Adjustable feet with metal caps for levelling Designed for metrology benches and inspection tables FAQ Is the height of the stand adjustable and what are the exact ranges? The Surface Plate Stand MS131.201 is supplied with two overall height ranges: 900–925 mm and 950–975 mm (both values include the measuring plate). What accessories are delivered with the frame? Delivery of the Filetta MS131.201 includes three support brackets (Besselsche), two anti-tilt locks and adjustable feet fitted with metal caps. Is this frame suitable for workshop and inspection use? Yes, the stand has been developed for measuring plates and inspection benches, making it suitable for quality-control areas and workshop metrology stations. How are levelling and stability achieved on uneven floors? The supplied adjustable feet with metal caps enable precise levelling, while the bracket layout and anti-tilt locks enhance overall stability. Can the stand be integrated immediately into an existing measuring table? The frame is configured for straightforward integration with surface plates and typical inspection setups; the included support hardware reduces the need for additional fittings. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Stable, vibration-free foundation for precise inspection
Surface plate stands, also referred to as surface plate supports or measuring plate stands, provide a rigid, low-vibration base for accurate dimensional testing and alignment of measuring instruments. Designed to carry granite or hardstone surface plates and to preserve plate flatness, these stands are engineered for reproducible set-ups and ergonomic handling on the shopfloor.
Where these stands are used and how they perform
Used across quality control, assembly, toolmaking and laboratory environments, surface plate stands allow measuring devices to be aligned and fixed directly on the granite surface plate for serial inspections and final calibrated checks. By combining a torsion-resistant frame with vibration-damping design, the stands ensure that the flatness of a granite surface plate is reliably maintained and that measurement scatter is reduced. Reproducible fixtures are enabled through defined mounting points and stable reference heights.
Tangible gains for shopfloor efficiency
The practical benefits of choosing a purpose-built stand for measuring plates include:
- Stability and precision: rigid construction minimises vibration and supports long-term flatness of the surface plate.
- Reproducible measurements: identical set-ups can be repeated quickly, reducing setup time.
- Ergonomic working height: commonly delivered at approx. 900 mm for comfortable handling during inspection and assembly.
- Organised workspace: clear storage and mounting space for gauges and fixtures improves process flow.
- Durability: robust steel-sheet or welded constructions prevent deformation and preserve geometry over years of use.
Metav as your precision partner for surface plate stands
Metav stands for democratisation of precision and acts as a quality filter for the European market. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry and trade. Benefits of sourcing through Metav include:
- a proven track record with over 48,000 customers, reflecting consistent quality and reliability
- an extensive assortment of more than 250,000 products, enabling consolidation of suppliers and simplified procurement
- reliable fulfilment from Emmerich am Rhein, ensuring dependable delivery to the workshop
These strengths make Metav an efficient choice when specifying surface plate stands and related measuring equipment.
Quick summary of what surface plate stands deliver
Surface plate stands create a stable, low-vibration platform that preserves the flatness of granite surface plates, accelerates inspection routines and reduces scrap through reproducible setups.
FAQ
What is the primary function of a surface plate stand?
A surface plate stand supports a granite or hardstone surface plate at an ergonomic working height and provides a vibration-damped, distortion-resistant base for precise measurement and alignment tasks.
Which workshops benefit most from surface plate supports?
Quality control labs, toolrooms, assembly stations and calibration workshops benefit most from surface plate supports because they require reproducible set-ups and minimal measurement variation.
How do these stands protect the flatness of a granite surface plate?
The stands use a stiff frame and controlled mounting points so that plate bending and vibration are minimised; as a result, the flatness of the granite surface plate is retained and measurement uncertainty is reduced.
Are surface plate stands suitable for assembly work as well as inspection?
Yes. Measuring plate stands are versatile: they support both inspection routines and hands-on assembly or adjustment work directly at the granite surface plate.
Why choose Metav when specifying measuring plate stands?
Metav combines specialised expertise with a wide product range and a reliable European supply chain, making it a practical partner for selecting and procuring surface plate stands that match industrial requirements.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com