14.2mm Countersink DIN 6319G 120° Cone Angle For M12 Screws, D4 36 H3 6 - AMF
Benefit from precise joint alignment, conformity to DIN 6319G and a defined 120° cone angle for consistent seating; order the AMF conical seat directly via Metav Werkzeuge or consult our specialists for application advice. Conical seat DIN 6319G (AMF) — Cone washer for M12, 14.2 mm bore, 120° Conical seat DIN 6319G — a seating washer designed to provide accurate axial alignment and uniform load transfer for M12 bolted connections in industrial and workshop assemblies Conforms to DIN 6319G standard Fits M12 screws with 14.2 mm bore 120° cone angle for precise seating Ensured alignment and reduced joint stress A conical seating washer manufactured to the DIN 6319G specification provides a controlled contact geometry that reduces eccentric loading and improves clamp distribution. The defined 120° cone angle generates a repeatable seating surface that minimises wobble and localised stress concentrations. In practice, the standardised geometry supports consistent torque-to-preload behaviour and contributes to longer joint lifetime, making the component suitable where reliable clamping and repeatability are required. Straightforward compatibility with common fasteners Designed for use with M12 fasteners, the item features a 14.2 mm bore and defined assembly dimensions (D4: 36 mm; H3: 6 mm) that allow immediate integration without additional machining. The larger outside diameter ensures an adequate bearing surface while the bore clearance accommodates standard M12 bolt shanks. These measurable values permit quick verification during inventory or assembly planning and simplify part selection for routine maintenance or series production. Workshop-ready standard component for industrial use Produced under the AMF designation, this cone washer serves as a compact, standardised solution for a wide range of bolted connections in mechanical engineering and maintenance operations. Its adherence to an established norm supports quality control processes and eases procurement decisions. Supplied in single units, the part is suitable for spare-part provisioning or targeted replacements in maintenance kits and assembly lines. Contact Metav Werkzeuge for rapid supply and specification advice on AMF conical seats; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833448NW Standard: DIN 6319G Brand: AMF Type: Conical seat (cone washer) Dimensions & core data Bore / D2: 14.2 mm Outside diameter / D4: 36 mm Height / H3: 6 mm Cone angle: 120° Suitable for: M12 Design & special features Conical seating washer Pack unit: 1 Label: Kegelpfanne DIN 6319G for screws M12, bore dia. 14.2 mm, cone angle 120° FAQ Is the component suitable for standard M12 bolts? Yes. The AMF conical seat is designed for M12 fasteners and features a 14.2 mm bore to provide appropriate clearance for M12 bolt shanks. What standard does this seating washer comply with? The part conforms to DIN 6319G, ensuring standardised geometry and reproducible seating performance for bolted joints. Which dimensions are relevant when checking fit? Key dimensions are the bore (14.2 mm), outside diameter (36 mm) and height (6 mm); these determine compatibility and bearing surface in assemblies. How does the 120° cone angle affect joint behaviour? A 120° cone angle provides a defined seating interface that promotes uniform load distribution and reduces eccentric forces, improving joint stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.2mm Countersink For M12 Screws 120° Cone Angle, D4 24 H3 5 - AMF
Take advantage of the combination of standard conformity, precise seating geometry and compact dimensions to ensure consistent assembly results and reduced rework. The combination of DIN 6319D conformity, a 14.2 mm bore and a 120° countersink angle supports reliable fastening in repetitive production. Order via Metav Werkzeuge or request application advice from the consultants. AMF Countersunk Washer DIN 6319D — for M12, 120° countersink The AMF countersunk washer DIN 6319D provides a defined seating for M12 countersunk screws in mechanical assemblies and general workshop use. DIN 6319D standard compliance For M12 countersunk screws 14.2 mm bore diameter 120° countersink angle Consistent seating for reliable assemblies The washer ensures a defined seating surface for countersunk fasteners, converting screw head geometry into repeatable clamping behaviour. Conformity with DIN 6319D means the bearing face and taper are manufactured to a recognised tolerance system; this reduces variation during assembly and minimises the need for corrective work. As a direct consequence, cyclical processes such as batch assembly or jigs/fixtures benefit from fewer rejects and quicker throughput, because the part enables a predictable interface between screw and component. Clear dimensions for assembly planning and tolerance control Key dimensions are provided for integration into drawings and fixtures: D2 = 14.2 mm (bore), D4 = 24 mm (outer diameter) and H3 = 5 mm (height). These values allow engineers to calculate contact surface, material removal and clearance requirements when combining the washer with countersunk screws and mating parts. The compatibility with M12 fasteners is explicit, simplifying parts lists and avoiding trial-and-error on the workshop floor. Accurate dimension data supports reliable torque transfer and consistent seating depth across repeated installations. Standardised parts for efficient procurement and maintenance Using a standardised washer simplifies stock management and interchangeability across suppliers and machines. The adherence to DIN 6319D facilitates replacement and cross-referencing with established fastener systems, which is especially valuable for maintenance cycles and long-term production planning. Reduced variety of bespoke components leads to leaner inventory, easier spare-part handling and predictable maintenance windows — practical advantages for both production planners and workshop technicians. Contact Metav Werkzeuge for tailored advice on integrating the AMF countersunk washer into assemblies or for order information; technical specialists are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000833468NW SKU: 4000833468NW Standard: DIN 6319D Facts Bore diameter (D2): 14.2 mm Outer diameter (D4): 24 mm Height (H3): 5 mm Countersink angle: 120° Suitable for screw size: M12 Packaging unit: 1 Design & features Product type: Countersunk washer Brand: AMF Application: Seating for countersunk screws FAQ What size of screws is this washer designed for? The AMF countersunk washer DIN 6319D is designed for M12 countersunk screws and provides the matching bore and taper for correct seating. Which dimensions are most relevant when planning an assembly? Key values are the 14.2 mm bore (D2), the 24 mm outer diameter (D4) and the 5 mm height (H3); these determine clearance, contact area and stack-up in the assembly that uses the AMF washer. Does the washer comply with an established standard for interchangeability? Yes — the washer is manufactured to DIN 6319D, ensuring compatibility with standardised countersunk screw systems and simplifying replacements. Can this washer improve assembly repeatability in jigs and fixtures? The defined geometry and conformity to DIN 6319D provide a reproducible seating surface, which supports repeatable torque transmission and consistent clamping across multiple assemblies using the AMF washer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Countersink DIN 6319D 120° For M16 Screws, 6.2mm Depth - AMF
Take advantage of a standardised seating solution that ensures secure seating for M16 fasteners, with a precise 19 mm bore and a 120° cone angle for consistent contact and predictable load transfer. Order the AMF countersunk washer directly via Metav Werkzeuge or consult the Metav technical team for application-specific advice. AMF Countersunk Washer DIN 6319D – precision cone seat for M16, 19 mm bore, 120° angle The AMF countersunk washer DIN 6319D is a standardised seating washer designed to provide a reliable cone seat for M16 screws in industrial and workshop fastening applications. DIN 6319D standardised geometry For M16 screws with 19 mm bore 120° cone angle for even seating Dimensions: D2 19 / D4 30 / H3 6.2 Consistent, standard-compliant seating for repeatable assemblies Conformity to DIN 6319D means a predictable seating geometry that reduces variations in assembly behaviour. The combination of a 19 mm bore and a 120° cone angle ensures the clamping surface meets the screw head accurately, which lowers the risk of uneven contact and localised stress. For production environments where repeatability is essential, this standardised geometry supports consistent torque behaviour and helps maintain component integrity over repeated cycles. Efficient load distribution that protects joint integrity Designed for use with M16 fasteners, the seating profile converts bearing loads into a broader contact area, promoting even load distribution and improving joint stability. The supplied dimensional data (D2: 19; D4: 30; H3: 6.2) indicates the washer’s seat and outer diameter proportions, which helps in selecting mating components and verifying fit in assemblies. Clear dimensional references make verification straightforward during incoming inspection and CAD validation. Simplified specification and reliable procurement for workshops The standardised specification reduces enquiry complexity when sourcing fasteners and seating elements for machinery or structural work. Specifying a DIN-compliant seating washer removes ambiguity in procurement documents and enables easy replacement throughout maintenance cycles. The compact design and single-piece form factor support rapid assembly while maintaining the precision expected in professional workshop and industrial contexts. Application-focused advantages for production and maintenance This seating washer is suitable wherever controlled seating of countersunk or conical-headed screws is required, particularly in structural joins and machinery mounts that rely on stable clamping forces. By using a component with defined geometry and documented dimensions, inspection protocols become more efficient and service life predictions more reliable, thereby supporting planned maintenance and quality assurance processes. For application guidance, availability of the AMF countersunk washer (DIN 6319D, SKU 4000833470NW) or bespoke quantity advice, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and supply information. Technical data Article number: 4000833470NW Standard: DIN 6319D Brand: AMF Product type: Countersunk washer Suitable for: M16 Packaging unit: 1 Facts Bore diameter (D2): 19 mm Outer diameter (D4): 30 mm Height (H3): 6.2 mm Cone angle: 120° Suitable screw size: M16 Special features DIN 6319D compliant geometry Defined seat for conical screw heads AMF brand component Compact single-piece design FAQ What is the primary purpose of this countersunk washer? The countersunk washer provides a standardised cone seat for conical or countersunk screw heads; the AMF washer to DIN 6319D (SKU 4000833470NW) ensures consistent contact and predictable load transfer in assemblies. Which screw size is this seating washer compatible with? This seating washer is specified for M16 screws; the washer’s 19 mm bore matches the shank clearance while the 120° cone angle aligns with standard conical head profiles. How do the dimensional values D2, D4 and H3 relate to installation? D2 (19 mm) denotes the bore for the screw shank, D4 (30 mm) is the outer seat diameter and H3 (6.2 mm) indicates the seating thickness—these values aid in selecting mating parts and verifying fit during installation of the AMF countersunk washer. Is the washer suitable for repeated assembly and disassembly? Yes, the standardised geometry of the DIN 6319D seating washer supports repeated assembly cycles with consistent seating behaviour, helping to maintain joint integrity over maintenance operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Countersunk Washer For M16 Screws 120° Countersink Angle, DIN 6319G - AMF
Reliable seating with standardised geometry and a Ø19 mm bore delivers consistent clamping and repeatable alignment; compliance with DIN 6319G and the 120° cone angle simplifies assembly planning. Order this cone seat directly via Metav Werkzeuge or contact our consultants for application-specific advice. AMF cone seat DIN 6319G — conical washer for M16, Ø19 mm The AMF cone seat DIN 6319G provides a standardised conical seating solution for M16 screw connections, designed to ensure centred load transfer and secure seating in bolted assemblies. *DIN 6319G standardised cone seat *Suitable for M16 screw connections *Bore Ø19 mm for precise centring Precision seating that reduces rework and improves joint reliability The conical seat follows the DIN 6319G geometry to deliver a predictable seating surface and repeatable clamping behaviour. By matching the screw head to a defined 120° cone, the component promotes uniform load distribution across the joint and reduces the risk of misalignment. This consistency lowers the likelihood of assembly rework and supports quality assurance processes on the shop floor, especially where repeatable torque and preload are required. Clear dimensions for straightforward selection and planning Key measures such as the Ø19 mm bore, outer diameter Ø44 mm and height 7 mm provide unambiguous data for inventory and CAD planning. These dimensions enable quick verification against mating parts and countersinks, making the conical washer simple to specify for procurement lists and parts bins. The standardised form factor shortens procurement cycles and eases spare-part management in production environments. Practical use and benefits in everyday bolted joints Designed for M16 applications, the tapered washer improves seating with countersunk or tapered head fasteners where concentric load transfer is important. The component’s standard compliance supports interchangeability and integration into existing assemblies without custom machining. For workshops and maintenance teams, this means fewer bespoke parts, faster assembly times and more reliable mechanical behaviour under cyclic loads. For DIN‑compliant seating and reliable M16 assemblies, contact Metav Werkzeuge for stock availability and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000833450NW Norm: DIN 6319G Item: Cone seat for screw M16, bore Ø19 mm, cone angle 120° Dimensions & key measures Bore diameter (D2): 19 mm Outer diameter (D4): 44 mm Height (H3): 7 mm Applications & compatibility Suitable for M16 Product type: Cone seat (conical washer) Brand: AMF FAQ What screw size is this cone seat intended for? The cone seat is intended for M16 screw connections and follows the DIN 6319G specification for conical seating. Which dimensions are essential to check before installation? Check the bore Ø19 mm, outer diameter Ø44 mm and height 7 mm to ensure compatibility with mating countersinks and head geometries. What does DIN 6319G compliance guarantee for assemblies? Compliance with DIN 6319G guarantees a standardised 120° cone geometry and consistent seating behaviour, aiding interchangeability and predictable clamping performance. Can this component be used with countersunk fasteners? Yes, the conical washer is suitable for use with tapered or countersunk head fasteners where a standard conical seating surface is required. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Countersink DIN 6319G 120° Cone Angle for M20 Screws, Bore Ø23.2mm - AMF
The combination of DIN 6319G conformity, a precise Ø23.2 mm bore and a 120° cone angle ensures consistent, flush seating for M20 fastenings; benefit from reliable assembly performance and straightforward specification handling. Order the AMF conical washer directly via Metav Werkzeuge or consult our specialists if application advice is required. AMF Conical Washer DIN 6319G – for M20 Screws, Ø23.2 mm Bore, 120° Cone Angle AMF Conical Washer DIN 6319G provides a standardised seating solution for countersunk fasteners, designed for secure and repeatable mounting in industrial assemblies. DIN 6319G conformity Precision bore Ø23.2 mm 120° cone angle for flush seating For M20 screw assemblies Secure seating for flush countersunk connections A conical washer manufactured to DIN 6319G gives a defined bearing surface for countersunk screw heads. The standardised geometry reduces variability in joint behaviour and helps prevent eccentric loading of the fastener. Specifying a standardised seating element like this AMF component improves process reliability on assembly lines and in maintenance tasks, as the conical profile guides the screw head into a stable, repeatable position for predictable clamping results. Precision dimensions that reduce assembly variance The washer’s measured bore (Ø23.2 mm) and overall geometry, including an outer seating diameter of 50 mm and a height of 8 mm, ensure components align consistently during installation. These precise dimensions lower the need for post-assembly correction and cut down on rework time. When tolerance stacks are critical, using a standardised seating washer limits the number of variables affecting joint integrity and helps maintain torque and preload consistency across multiple fastenings. Integration into workshop and production workflows Designed for use with M20 fastenings and featuring a 120° cone angle, this seating washer fits seamlessly into common bolted-joint designs where flush appearance and load distribution are required. Its conformity to a recognised DIN standard simplifies parts lists and procurement, and it is suited to both one-off repairs and serial production. Specifiers and workshop planners benefit from predictable behaviour in load transfer and can include the component directly in assembly drawings and bills of materials. Contact Metav Werkzeuge for tailored advice and fast supply of the AMF conical washer — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application requirements and place an order Technical data Article number: 4000833451NW Manufacturer: AMF Product type: Conical washer Standard: DIN 6319G Packaging unit: 1 Dimensions / Core data Bore diameter D2: 23.2 mm Outer diameter D4: 50 mm Height H3: 8 mm Cone angle: 120° Suitable for screw size: M20 Features / Applications Countersunk seating for flush installation Conforms to DIN 6319G For use with M20 screws Designed for consistent load distribution FAQ What screw size is this seating washer intended for? This AMF conical washer is specified for use with M20 screws and is listed under article number 4000833451NW. What are the key dimensions of the washer? The washer has a bore diameter of 23.2 mm (D2), an outer seating diameter of 50 mm (D4) and a height of 8 mm (H3). Which standard does the washer comply with? The component is manufactured to DIN 6319G, ensuring standardised geometry for countersunk seating. What is the cone angle and why does it matter? The 120° cone angle provides a reliable seating profile that promotes flush installation of countersunk heads and helps distribute load evenly across the bearing surface. Is this suitable for serial production use? Yes — the standardised geometry and precise dimensions of the AMF conical washer support repeatable assembly processes and are appropriate for both serial production and maintenance operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Countersink Seat DIN 6319D 120° Cone Angle, For M20 Screws - AMF
Take advantage of the DIN 6319D conformity and the precise 23.2 mm bore to ensure a reliable seat for M20 countersunk screws, improving load distribution and alignment in assemblies; order via Metav Werkzeuge or consult their experts for supply and compatibility. AMF Countersunk Washer DIN 6319D (M20, 23.2 mm, 120°) The AMF Countersunk Washer DIN 6319D provides a defined countersink seat for fastening applications, designed to accommodate M20 countersunk screw heads and to ensure uniform contact in mechanical and structural assemblies. Designed to DIN 6319D standard Suitable for M20 countersunk screws Bore diameter 23.2 mm for accurate seating Countersink angle 120° for matching screw heads Precision seating reduces local stress and improves joint reliability Adherence to DIN 6319D guarantees a standardised geometry that helps distribute clamping forces evenly beneath countersunk screw heads. The defined 120° countersink angle and the 23.2 mm bore ensure that the screw head sits concentrically, which reduces localised material stress and the risk of deformation in thin plates or soft substrates. This measurable conformity simplifies quality checks and supports repeatable assembly processes in production environments. Consistent compatibility and easier assembly for faster production The washer is specified for M20 countersunk screws, enabling straightforward component matching and reducing assembly errors. By providing a precise bearing surface, the seat minimises the need for rework and improves torque transmission from the screw head to the joint. For procurement and inventory planning, the standardised geometry enables interchangeability between batches, supporting predictable lead times and smoother production scheduling. Robust sourcing and technical clarity for professional users Supplied under SKU 4000833471NW, the component is a pragmatic choice for engineers and buyers seeking standard-compliant parts that integrate into existing designs without modification. Clear technical dimensions such as D2 = 23.2 mm, D4 = 36 mm and H3 = 7.5 mm (see technical data) mean the seat can be verified quickly during incoming inspections. The documented specification supports traceability and simplifies supplier audits, reinforcing responsible procurement practices in workshops and industrial operations. For procurement advice, availability checks or compatibility queries regarding the AMF Countersunk Washer DIN 6319D, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure supply and technical guidance. Technical data Article number: 4000833471NW Standard: DIN 6319D Product type: Countersunk washer Brand: AMF Suitable for: M20 Facts Bore diameter (D2): 23.2 mm Outer diameter (D4): 36 mm Height (H3): 7.5 mm Countersink angle: 120° Special features Conforms to standardised geometry for repeatability Designed for countersunk screw heads to improve seating Packaged unit: 1 Label reference: Kegelpfanne DIN 6319D f. Schrauben M20 FAQ What screws is this seat designed for? The AMF Countersunk Washer DIN 6319D is designed for use with M20 countersunk screws, providing a matched bearing surface for proper head seating. Why is compliance with DIN 6319D important? Compliance with DIN 6319D ensures standardised dimensions and angles so assemblies behave predictably; this simplifies inspection, replacement and compatibility across suppliers. How does a 120° countersink improve joint performance? A 120° countersink matches the geometry of corresponding screw heads, increasing contact area and reducing point loads, which enhances joint longevity and reduces the risk of material damage. Can this washer be used in structural or mechanical assemblies? Yes, the defined seating and load distribution characteristics make the component suitable for both structural and mechanical fastening tasks where standardised countersunk connections are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 120° Countersink DIN 6319G 9.6mm Bore, 24mm Cup, 5mm Depth - AMF
Combining DIN 6319G conformity with precise geometry, this countersunk washer provides reliable, flush seating and consistent load distribution for assemblies using M8 countersunk fasteners; the 9.6 mm bore and 120° cone angle ensure fast, repeatable integration. Order the component directly via Metav Werkzeuge or consult the advisors if specification advice is required. AMF countersunk washer DIN 6319G — for M8 screws, 9.6 mm bore, 120° countersink AMF countersunk washer DIN 6319G designed to seat countersunk heads securely in metal and mechanical assemblies Compliant with DIN 6319G For M8 fasteners Bore Ø 9.6 mm Countersink angle 120° Uniform load distribution for secure assemblies Compliance with DIN 6319G guarantees a standardised seating geometry that improves load distribution beneath countersunk heads. The component functions as a seating washer that spreads bearing forces across a larger surface, reducing surface indentation and localised stresses. This results in a more reliable mechanical joint, particularly where repeated assembly and disassembly are required. The specification-driven design supports predictable behaviour in production environments and simplifies quality control. Designed for straightforward integration in M8 assemblies The washer’s 9.6 mm bore is matched to M8 countersunk fasteners, permitting simple alignment and clearance during installation. The standardised dimensions reduce assembly time by removing guesswork about compatibility and eliminate unnecessary rework. In prefabrication and maintenance contexts, using components with defined bore and outer diameters speeds up inventory choices and helps maintain consistent torque and clamping characteristics across batches, supporting efficient process flow. Consistent seating with 120° geometry A 120° cone angle provides a precise match for countersunk screw heads complying with the same angle, enabling flush seating that improves both the aesthetic finish and the functional load path of the fastener connection. Flush seating reduces the risk of eccentric loading and helps maintain the intended clamping force. The washer’s defined outer and height dimensions support repeatable clamping behaviour, making it suitable for systematic production or service tasks where component interchangeability and joint integrity are priorities. Contact Metav Werkzeuge for ordering guidance or to confirm compatibility of the AMF countersunk washer (SKU 4000833446NW) with specific assembly requirements Technical data Article number: 4000833446NW Manufacturer: AMF Standard: DIN 6319G Product: countersunk washer Suitable for: M8 Dimensions & key figures Bore diameter (D2): 9.6 mm Outer diameter (D4): 24 mm Height (H3): 5 mm Countersink angle: 120° Features & compatibility Complies with DIN 6319G For M8 countersunk screws Packaging unit: 1 piece UID: 4000833446NW FAQ Is this washer suitable for M8 countersunk screws? The AMF countersunk washer is specified for M8 fasteners and has a bore diameter of 9.6 mm, ensuring proper clearance and alignment for standard M8 countersunk heads. What is the countersink angle and why does it matter? The washer features a 120° countersink angle; this matches common countersunk screw heads and ensures flush seating, which promotes even load transfer and reduces edge stresses. How do the D2, D4 and H3 figures relate to installation? D2 (bore Ø 9.6 mm), D4 (outer Ø 24 mm) and H3 (height 5 mm) define the washer’s fit and seating profile, enabling predictable assembly behaviour and consistent clamping across installations. Does this component conform to an industry standard? Yes, the product conforms to DIN 6319G, providing a recognised geometry for countersunk seating that supports quality assurance and interchangeability in industrial applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com