18mm Clamping Screw M5 5mm Square For Changeable Holder, 18mm Length - TECWERK
Combining a secure M5 thread with a 5 mm square drive and an 18 mm overall length, this clamping screw delivers dependable retention in TECWERK quick-change holders while keeping downtimes low. Order replacement parts directly via Metav Werkzeuge or consult the advisors for compatibility and stock information. TECWERK Clamping Screw AA – M5 thread, 18 mm, 5 mm square drive A TECWERK clamping screw AA intended as a spare part for quick-change turning tool holders, engineered to provide precise axial fixation in compact assemblies. Replacement part for TECWERK quick-change holders M5 thread for standardised clamping 18 mm overall length for compact assemblies 5 mm square drive for secure torque input Secure retention that reduces machine downtime The clamping screw is designed for straightforward replacement in quick-change systems, delivering consistent axial fixation that safeguards insert alignment and cutting stability. With its M5 thread and compact geometry, the fastener keeps clamping forces reliable across repeated tool changes, which translates into fewer stoppages and a more predictable production rhythm. The clearly defined mechanical interface lowers the risk of misfits and helps maintain machining accuracy. Standardised interface for easy compatibility checks Featuring a standard M5 pitch and a 5 mm square drive, the part matches common clamping interfaces used in quick-change tool holders. These measurable characteristics simplify procurement and inventory management: the thread designation and square drive are immediately verifiable, so replacement planning becomes a matter of matching specifications rather than guesswork. The result is faster reassembly and reduced setup times on the shop floor. Compact form for tight assemblies and reliable handling At 18 mm overall length, the component suits compact toolholders where axial space is limited. The square drive provides a positive engagement for tightening tools and helps ensure torque is transmitted without slippage during installation or removal. As a spare part tailored to quick-change systems, the fastener supports repeatable clamping performance and contributes to consistent tool life when used within its specified interface. Supply reliability and expert support for workshop planners Metav Werkzeuge supplies this spare as part of a broad portfolio that streamlines ordering and reduces supplier complexity. Backed by a substantial product range and industrial experience, Metav enables reliable stock replenishment and offers technical guidance for compatibility decisions. For workshops seeking a blend of availability and trusted standards, this replacement component integrates into established toolholder systems with minimal administrative effort. Request this TECWERK spare via Metav Werkzeuge for assured compatibility and fast supply; technical enquiries and availability checks can be directed to Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832426NW Label: Spannschraube Größe=AA M5 L.18mm 4-KT.5mm z.Wechselhalter TECWERK Brand: TECWERK Product type: Clamping screw Type: AA Facts Thread: M5 Overall length: 18 mm Square drive: 5 mm Packaging unit: 1 Special features Spare part for TECWERK quick-change holder for turning tool inserts and with prism Axite enrichment: Ersatzteil zu TECWERK Wechselhalter für Drehstähle und mit Prisma UID: 2000832426NW FAQ Is this clamping screw compatible with TECWERK quick-change holders? Yes. The clamping screw is specified as a replacement part for TECWERK quick-change holders and matches the interface used for turning tool inserts. What are the key dimensions and drive type? The component has an M5 thread, an overall length of 18 mm and a 5 mm square drive, which together define the mechanical connection and torque input method. Can the screw be used in compact toolholder assemblies? Yes. With its 18 mm overall length and compact profile, the screw is suitable for tight axial spaces in quick-change systems while maintaining secure fixation. How should compatibility be verified before ordering? Verify the thread (M5), the square drive size (5 mm) and the overall length (18 mm) against the toolholder specifications; the SKU 2000832426NW can be referenced for exact matching. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
21mm Clamping Screw M7 8mm Square For Indexable Holder - TECWERK
Take advantage of a compact spare screw that combines a standard M7 thread, a precise 21 mm overall length and an 8 mm square drive to maintain secure clamping in quick-change turning holders. Order the part directly via Metav Werkzeuge or consult our technicians for compatibility checks and stock advice. Clamping screw Size A, M7, 21 mm, 4-square 8 mm – TECWERK clamping screw for interchangeable holder The Clamping screw Size A, M7, 21 mm is a spare clamping component for TECWERK interchangeable holders for turning tools, designed to secure the insert holder via an 8 mm square drive. Precision spare screw M7 21 mm overall length for compact fit 8 mm square drive for reliable torque Secure fastening that keeps production steady A dedicated M7 clamping screw provides a standardised thread interface that simplifies maintenance and replacement. The 21 mm overall length is suited to compact holders where space is limited, while the 8 mm square drive ensures a secure transfer of torque from the wrench to the clamping element. Engineers benefit from consistent clamping force and predictable assembly behaviour, which together reduce the risk of tool movement and unplanned stoppages. Designed for quick replacement and compatibility As a spare part for TECWERK interchangeable holders, this clamping screw supports quick swaps during tool changes and servicing. The part is intended for use with quick-change turning tool holders that incorporate a prism locating feature; this alignment aid ensures repeatable positioning when the screw is reinstalled. Maintaining a small stock of these screws minimises downtime and keeps change-over procedures lean. Practical workshop handling and inventory benefits Supplied individually, the component is straightforward to store and identify by its thread and drive dimensions. The 4-sided (square) 8 mm drive type is compatible with common workshop spanners and torque tools, making torque application reliable and maintenance predictable. Keeping matching spare screws avoids improvised repairs and supports a consistent toolholding standard across lathe stations, which is essential for quality and repeatability. Contact Metav Werkzeuge to confirm fitment and reserve compatible M7 clamping screws for TECWERK interchangeable holders; our Emmerich-based team will advise on availability and delivery options Technical Data Article number: 2000832427NW Product type: Clamping screw Manufacturer: TECWERK Label: Spannschraube Größe=A M7 L.21mm 4-KT.8mm z.Wechselhalter TECWERK Dimensions and core data Thread: M7 Overall length: 21 mm Square drive: 8 mm Type: A Packaging unit: 1 Applications and special features Spare part for TECWERK interchangeable holder for turning tools and prism Replacement screw for quick-change clamping systems Four-sided drive (4-kt) 8 mm for secure torque transfer Compact dimensions for confined assemblies FAQ What are the thread and length specifications of this clamping screw? The clamping screw is specified with an M7 thread and an overall length of 21 mm; it is listed under SKU 2000832427NW for easy identification. Is this screw compatible with TECWERK interchangeable holders? Yes, the spare clamping screw is intended as a replacement part for TECWERK interchangeable holders for turning tools and the prism locating variant. What drive type is required to tighten the screw? The component uses an 8 mm square drive (4-kt), compatible with common square-drive spanners and torque tools found in workshop tool sets. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
27mm Clamping Screw M11 10mm Square For Quick-Change Holder - TECWERK
Take advantage of precise compatibility and straightforward replacement for rapid workshop servicing: the M11 thread and the 10 mm square head provide a secure clamping interface for TECWERK quick‑change holders, while the compact 27 mm length keeps assemblies compact and accessible. Order the required spare via Metav Werkzeuge or consult our specialists for fitment advice. Clamping screw size B M11 L 27 mm, 10 mm square – TECWERK The Clamping screw size B M11 L 27 mm, 10 mm square is a replacement clamping fastener for TECWERK quick‑change holders, designed for turning bars and prism clamping in workshop environments. Replacement part for TECWERK quick‑change holder M11 threaded clamping screw 27 mm overall length with 10 mm square head Secure fit that reduces setup variability The component is specified as a replacement part for TECWERK quick‑change systems and is built to restore original clamping geometry when a worn or damaged fastener is replaced. The M11 thread ensures a standardised engagement with the holder, while the 10 mm square head provides a positive drive for torque transfer without slippage. Restoring correct clamping geometry reduces rework and rejects, so process stability and part repeatability are maintained. Minimise downtime with simple spare‑part logistics Supplied as a single unit, this spare fastener simplifies stock keeping and maintenance planning. Keeping a small inventory of this clamping screw avoids prolonged machine standstills: when a replacement is fitted, the toolholder is returned to service immediately and calibration routines are typically retained. The compact 27 mm overall length keeps the assembly accessible, which speeds up interventions and lowers labour time per replacement. Practical compatibility for turning and prism clamping The design suits quick‑change turning bars and holders that use prism clamping; the four‑sided head is intended for secure manual or keyed tightening and prevents rotation under cutting forces. As a standardised, OEM‑compatible spare for TECWERK holders, the part supports consistent clamping force and helps maintain cutting tool performance. Where tool clamping precision matters, replacing a degraded fastener with an identical specification avoids margin creep and supports predictable machining results. Request the TECWERK replacement clamping screw through Metav Werkzeuge — our Emmerich team will advise on compatibility and delivery and can supply the part directly to the workshop. Technical data Article number: 2000832428NW Manufacturer: TECWERK Product type: Clamping screw Type designation: B Label: Spannschraube Größe=B M11 L.27mm 4-KT.10mm z.Wechselhalter TECWERK UID: 2000832428NW Facts Thread: M11 Overall length: 27 mm Square head: 10 mm Packaging unit: 1 Special features Replacement part to TECWERK quick‑change holder for turning bars and prism clamping Four‑sided head for secure torque transfer Compact length for accessible assembly FAQ Is this clamping screw compatible with TECWERK quick‑change holders? Yes. The clamping screw size B M11 L 27 mm is specified as a replacement part for TECWERK quick‑change holders used with turning bars and prism clamping. What are the key dimensions to check before ordering? The main dimensions are an M11 thread, 27 mm overall length and a 10 mm square head; these values should be checked against the holder specification. Is the part supplied individually or in a set? The item is supplied as a single unit (packaging unit 1) for targeted replacement needs. Can this screw be used for prism clamping applications? Yes. The specification indicates suitability for prism clamping in compatible TECWERK holders. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
38mm Clamping Screw M14x1.5 14mm Square For Indexable Holder - TECWERK
Take advantage of a precise spare part that restores clamping reliability: a M14x1.5 threaded connection, a 38 mm overall length and a 14 mm square drive ensure consistent tool retention in modular turning setups; order genuine TECWERK replacement parts directly via Metav Werkzeuge or contact our technical advisors for compatibility checks. Clamping screw D1 – M14x1.5, L 38 mm for TECWERK changeable holders The clamping screw D1 is a replacement retaining screw designed for TECWERK changeable holders for turning tools, offering a compact form factor for secure tool clamping. M14x1.5 thread for secure clamping 38 mm overall length 14 mm square drive for standard keys Replacement part for TECWERK holder Minimise downtime with a direct-fit spare for modular holders This clamping component acts as a straightforward replacement to restore the original clamping geometry of modular tool holders. The combination of an M14x1.5 thread and a compact 38 mm length reproduces factory tolerances, which reduces the need for additional shimming or reworking. Compatibility with TECWERK changeable holders means faster reassembly of the turning tool system and a lower likelihood of process interruptions, thereby supporting uninterrupted production and predictable setup times. Faster, repeatable clamping for consistent machining A square drive of 14 mm delivers positive engagement with standard wrenches and torque tools, enabling accurate torque transfer and uniform clamping force across repeated tool changes. The clear thread specification M14x1.5 provides predictable axial behaviour when tightening, which helps maintain concentricity and tool alignment. For workshop planners this translates into fewer rejects and a reduced need for time‑consuming adjustments after replacement, improving overall process efficiency. Practical workshop benefits and fitment guidance Supplied as a single unit, the screw is intended as a direct spare for TECWERK holders that employ a prism-style retention. As a repair part it simplifies inventory management for maintenance teams: stocking the correct D1 retaining screw avoids extended machine downtime. Verification of the holder type and the presence of a prism seat is recommended before installation to ensure fitment and preserve the original clamping geometry. Routine visual checks of the thread and drive face will maintain reliable operation. Choose genuine TECWERK spare parts via Metav Werkzeuge for assured fit and faster recovery of production — contact Metav Werkzeuge in Emmerich for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832430NW Type: D1 Product: Clamping screw Facts Thread: M14x1.5 Overall length: 38 mm Square drive: 14 mm Packaging unit: 1 Special features Replacement part for TECWERK changeable holder for turning tools Designed for holders with prism retention 4-sided square drive 14 mm FAQ Is this clamping screw compatible with TECWERK changeable holders? Yes. The clamping screw D1 (SKU 2000832430NW) is supplied as a replacement part specifically for TECWERK changeable holders for turning tools and is intended for use with prism-style retention. Which torque tool fits the 14 mm square drive? Standard 14 mm square wrenches or torque adapters for a 14 mm square interface are suitable for applying the required tightening force to the 14 mm drive. What does the thread specification M14x1.5 mean for installation? The M14x1.5 designation indicates a metric thread with a 14 mm major diameter and a 1.5 mm pitch; this ensures standardised engagement and predictable axial movement during tightening. Can this screw be used to replace worn clamping elements to restore concentricity? Yes. Replacing a worn clamping screw with this D1 spare reproduces the original clamping geometry and helps restore concentricity and repeatability in the tool holder assembly. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
38mm Clamping Screw M14x1.5 Square 14mm For Changeable Tool Holder - TECWERK
Combining the M14×1.5 thread with a 38 mm overall length and a 14 mm square drive ensures quick restoration of secure clamping in TECWERK changeable holders; order the spare part directly via Metav Werkzeuge or consult our specialists for fitment advice. Clamping screw size C M14×1.5 L38 mm — 4-sided 14 mm square for changeable holder (TECWERK) The clamping screw size C M14×1.5 L38 mm is a dedicated spare part for TECWERK changeable holders, designed to secure turning bars and prism versions in workshop turning operations. *For TECWERK changeable holder compatibility *Thread M14×1.5 *Overall length 38 mm *14 mm square drive Reduced downtime through precise thread and length The combination of a standard M14×1.5 thread and a defined 38 mm length delivers a predictable replacement that reinstates original tool geometry quickly. As a spare component designed for changeable holders, this clamping screw reduces adjustment time after a changeover, contributing to a steadier production flow. The clear specification of the thread and length allows procurement and maintenance teams to standardise replacement cycles and avoid uncertain fits. Secure torque transfer and repeatable clamping The 14 mm four‑sided drive provides a positive engagement with common workshop wrenches and torque tools, which translates to reliable torque transfer and reduced risk of slippage during tightening. A predictable interface means clamping force is more consistent between changes, improving repeatability of turning operations and lowering the likelihood of rejects due to movement at the insert seat. This practical reliability supports smoother shift handovers and steadier machining quality. Spare‑part logistics aligned with workshop needs Supplied as a single unit and referenced by SKU 2000832429NW, the screw is intended as a straightforward spare for TECWERK changeable holders. Clear identification and standard dimensions simplify inventory management and spare‑parts purchasing. Having the correct, specified replacement on the shelf minimises downtime and keeps turning tools back in service without the guesswork sometimes involved with non‑standard fasteners. Contact Metav Werkzeuge for availability and compatibility advice on TECWERK clamping screws and to streamline spare‑part supply for the workshop Technical data Article number / SKU: 2000832429NW Type: C Product: Clamping screw Facts Thread: M14×1.5 Overall length: 38 mm Square drive: 14 mm Packaging unit: 1 Special features Spare part for TECWERK changeable holder for turning bars and prism versions Design: 4-sided square drive for secure wrench engagement Intended use: replacement screw for clamping in changeable holders FAQ Is this clamping screw compatible with TECWERK changeable holders? The clamping screw size C M14×1.5 L38 mm is specified as a spare part for TECWERK changeable holders and is intended to fit holders designed for turning bars and prism variants. What are the exact dimensions and thread specification? The component features an M14×1.5 thread, an overall length of 38 mm and a 14 mm four‑sided square drive; reference SKU 2000832429NW for ordering. Can this part be used as a direct replacement during scheduled maintenance? Yes, the clamping screw is intended as a direct spare part for TECWERK changeable holders, allowing maintenance teams to restore original clamping geometry without custom modifications. How is the part supplied for inventory purposes? The clamping screw is supplied in a packaging unit of 1 and is listed under SKU 2000832429NW for simple stock control and procurement. Which applications is this screw intended for in turning operations? Designed for securing turning bars and prism variants in TECWERK changeable holders, the screw supports repeatable clamping for standard workshop turning tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com