19.1mm Flat Pot Magnet With Through Hole And Countersink, 30 N Holding Force, AlNiCo 500 - TECWERK
Combine compact design with reliable high-temperature performance: the AlNiCo 500 pot magnet offers a secure 30 N hold and a countersunk through hole for straightforward screw mounting; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Flat countersunk pot magnet D19.1 mm H7.5 mm with through hole, holding force 30 N – TECWERK The flat countersunk pot magnet D19.1 H7.5 is a compact AlNiCo 500 cup magnet designed for secure, high-temperature fastening in jigs, fixtures and light assembly tasks AlNiCo 500 alloy for high-temperature use Countersunk through hole, bore Ø 3.7 mm Compact Ø 19.1 mm × H 7.5 mm design Holding force 30 N for secure attachment High-temperature stability for reliable fixing The core advantage of this component is its AlNiCo 500 construction, which provides stable magnetic properties at elevated temperatures up to 450 °C. For applications involving heat or proximity to baking processes, the magnet maintains performance where many ferrite or rare-earth magnets would demagnetise. The 30 N retention force supplies a predictable, repeatable hold for light securing and positioning tasks, making the component suitable for small fixtures and temporary jigs in production environments. This section focuses on measurable performance and explains why material choice matters for thermal resilience. Small footprint for precise positioning in assemblies With an external diameter of Ø 19.1 mm and a height of 7.5 mm, the unit occupies minimal space while offering a flat contact face for reliable engagement. The Ø 3.7 mm central bore with countersink permits recessed screw mounting so fasteners sit flush, reducing profile interference and improving repeatability when used in alignment or locating applications. The compact geometry supports integration into tight assemblies and tool stations where minimal disturbance of adjacent components is important. Practical benefits include easier handling in confined jigs and stable placement during repetitive operations. Practical mounting and production considerations The magnet is supplied in packaging unit: 10 and is executed with through hole and countersink to suit conventional countersunk screw fixation. During component manufacture, the magnet’s coating processes can be exposed to a baking stage up to 200 °C, as indicated by production parameters; this is relevant for bespoke surface treatments or assembly steps that involve elevated temperatures. For installation, select a countersunk screw that matches the 3.7 mm bore and the desired clamping torque, and avoid impacts that could impair the magnet’s seating. The combination of compact form and a recessed fixing point streamlines assembly workflows without compromising hold. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK pot magnet into specific fixtures and to arrange delivery or technical consultation at our Emmerich centre Technical data Article number: 4000832270NW UID: 4000832270NW Manufacturer: TECWERK Product type: Flat countersunk pot magnet Dimensions & performance Diameter: 19.1 mm Height: 7.5 mm Bore diameter: 3.7 mm Holding force: 30 N Max operating temperature (magnet): 450 °C Coating bake temperature: 200 °C Materials & features Material: AlNiCo 500 Execution: with through hole and countersink Packaging unit: 10 Label: Flachtopfmagnet D.19,1mm H.7,5mm m.Durchgangsbohrung Haftkraft 30 N BELOH FAQ What material is the magnet made from and why does it matter? The magnet is produced from AlNiCo 500, chosen for its thermal stability and predictable magnetic performance at elevated temperatures, which makes the flat countersunk pot magnet D19.1 H7.5 suitable for heated environments. What holding capacity can be expected from this cup magnet? The device provides a holding force of 30 N, offering a reliable grip for light securing and positioning tasks in fixtures and small assemblies using the TECWERK flat countersunk pot magnet (SKU 4000832270NW). How is the magnet mounted in an application? Mounting is via the central Ø 3.7 mm through hole with countersink so a countersunk screw sits flush, ensuring a low profile and repeatable fixing when used in jigs or tooling. Are there any temperature limits for use or processing? The magnet maintains magnetic properties up to 450 °C; manufacturing or coating processes may include a baking stage up to 200 °C, which should be considered during component processing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
28.6mm Flat Pot Magnet 50 N Holding Force With Through Hole And Countersink, AlNiCo 500 - TECWERK
Take advantage of a compact magnetic fixing that combines durable AlNiCo 500 construction, a holding force of 50 N and a user-friendly through-hole with countersink for flush mounting; efficient installation and reliable high‑temperature performance help keep small assembly and fixturing tasks precise and repeatable. Order or request guidance via Metav Werkzeuge or consult their specialists for application support. Flat pot magnet D28.6 × H8.5 mm, AlNiCo 500 (TECWERK) A flat pot magnet suitable for compact fixings, light fixturing and high‑temperature applications High-temperature stability up to 450 °C Solid AlNiCo 500 construction Through-hole with 4.8 mm bore and countersink Holding force 50 N for light fixtures Consistent magnetic performance for small‑scale fixturing The Flat pot magnet D28.6 × H8.5 mm is built from AlNiCo 500, an alloy chosen for its resistance to thermal demagnetisation, delivering a reliable holding force of 50 N in repeatable applications. In production environments where consistent clamping and short heat exposure occur, the material’s stability reduces the need for frequent recalibration. The specification supports small assembly, positioning and light fixturing tasks where predictable magnetic behaviour is a priority. Secure, low‑profile mounting with countersunk through‑hole The integrated through-hole with a 4.8 mm bore and corresponding countersink enables flush fixing so the magnetic face remains unobstructed and contact with workpieces is maximised. This arrangement permits secure attachment using standard fasteners, minimising added profile and simplifying replacement when repositioning or maintenance is required. The design supports streamlined assembly workflows and reduces mechanical interference in compact setups. Compact dimensions and industrial thermal suitability With a 28.6 mm diameter and 8.5 mm height, the magnet offers a compact footprint suited to constrained spaces in workshops and light‑manufacturing cells. The component tolerates a maximum operating temperature of 450 °C, and a paint‑bake compatibility up to 200 °C, which is useful where fixtures undergo subsequent coating or thermal processing. These thermal figures enable deployment in operations that involve short high‑temperature cycles while maintaining magnetic function. Contact Metav Werkzeuge for tailored advice on the TECWERK flat pot magnet and fast supply from Emmerich; consultants can confirm suitability for specific applications and advise on installation options. Technical Data Article number: 4000832271NW Product type: Flat pot magnet Brand: TECWERK Material: AlNiCo 500 Execution: with through-hole and countersink Facts Diameter: 28.6 mm Height: 8.5 mm Bore diameter: 4.8 mm Holding force: 50 N Maximum operating temperature: 450 °C Paint-bake temperature: 200 °C Packaging unit: 1 Special features Compact footprint for tight assemblies Through-hole and countersink for flush fixing Stable magnetisation at elevated temperatures Suited to light fixturing and fastening tasks FAQ What maximum temperature can the magnet withstand? The TECWERK flat pot magnet (SKU 4000832271NW) is specified for a maximum operating temperature of 450 °C, with a separate paint‑bake compatibility listed at 200 °C. Which fasteners are compatible with the mounting hole? The device features a 4.8 mm through‑hole with countersink to accept standard fasteners and allow flush mounting; this keeps the magnetic face clear for optimal contact. Is the magnet suitable for outdoor or corrosive environments? The product is made from AlNiCo 500, but the data provided does not specify any external corrosion protection; for outdoor or corrosive conditions additional surface treatment or protective measures should be considered. What applications suit a 50 N holding force? A holding force of 50 N makes this magnet appropriate for light fixtures, repeatable positioning tasks and small assembly aids where moderate retention is sufficient without bulky hardware. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
38.1mm Flat Cup Magnet With Through Hole And Countersink 130N Holding Force, AlNiCo 500 - TECWERK
Compact AlNiCo 500 construction together with a holding force of 130 N and a countersunk through bore delivers secure retention even in heated processes — ideal for fixtures that require both magnetic and mechanical attachment. Order the flat countersunk pot magnet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Flat countersunk pot magnet D 38.1 mm, 130 N holding force The flat countersunk pot magnet is a compact magnetic fastening element designed for industrial fixtures and high-temperature applications. AlNiCo 500 for elevated temperature use 130 N maximum holding force Countersunk through hole Ø 4.8 mm Compact diameter 38.1 mm for tight spaces Secure retention under heat for improved process reliability The magnet’s core advantage is its AlNiCo 500 alloy, which maintains magnetic performance at elevated temperatures up to 450 °C, reducing the risk of demagnetisation during thermal cycles. This characteristic translates into consistent clamping and positioning where temperature exposure is routine, such as in drying ovens or during coating processes. With a holding force of 130 N, the component provides measurable retention that supports steady assembly and handling, improving throughput and reducing rework. Reliable mechanical fixing for safe, flush mounting A countersunk through bore enables secure screw fastening in addition to magnetic grip, allowing a combined mechanical-magnetic attachment that prevents slippage on inclined or vibrating assemblies. The Ø 4.8 mm bore accepts common fasteners and the countersink allows the screw head to sit flush, preserving a low profile and preventing interference with adjacent parts. This design is particularly useful where a permanent or semi-permanent mounting is required alongside magnetic holding. Space-saving profile with paint-bake compatibility With a diameter of 38.1 mm and a low height of 10.4 mm, the unit is suitable for confined assemblies where a compact footprint is essential. The magnet also tolerates a coating bake temperature of 200 °C, enabling integration into painted or lacquered components without compromising adhesive processes. The compact form factor combined with thermal robustness supports efficient layout in jigs, fixtures and manufacturing aids, contributing to cleaner workflows and predictable results. For specification checks or application advice, Metav Werkzeuge’s technical team can be contacted by email or phone. Contact Metav Werkzeuge for personalised advice and secure procurement of this TECWERK flat countersunk pot magnet, ensuring the right mounting and temperature performance for the intended application Technical data Article number: 4000832272NW Facts Diameter: 38.1 mm Height: 10.4 mm Holding force: 130 N Bore diameter: 4.8 mm Maximum operating temperature: 450 °C Coating bake temperature: 200 °C Packaging unit: 1 Special features Material: AlNiCo 500 Execution: with through hole and countersink Product type: Flat countersunk pot magnet Manufacturer: TECWERK FAQ What maximum temperature can this magnet withstand before performance is affected? The TECWERK flat countersunk pot magnet (SKU 4000832272NW) is specified for continuous use up to 450 °C, which preserves magnetic stability in high-temperature processes. Can the magnet be fixed with a screw and still sit flush with the assembly surface? Yes. The unit features a countersunk through bore (Ø 4.8 mm) that allows a screw to be installed flush, combining magnetic holding with mechanical fastening for improved safety. What holding capacity can be expected from this magnet in standard conditions? Under standard conditions the magnet provides a holding force of 130 N; actual performance depends on mounting, substrate material and surface flatness. Is the magnet suitable for painted or powder-coated parts? The magnet tolerates a coating bake temperature of 200 °C, so it is compatible with many paint and lacquer processes provided the specified bake temperatures are not exceeded. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com