Efficient, burr‑free removal of spot welds through the combination of cobalt high‑speed steel construction, DIN‑compliant dimensions and a 6 mm cylindrical shank. Reliable repeatability and straightforward chuck compatibility support steady production flow — order directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Spot Weld Drill D6 x L66 mm — HSS‑Co, 6 mm shank The TECWERK Spot Weld Drill D6 x L66 mm is a purpose‑designed drill for precise, clean extraction of spot welds in sheet metal fabrication and repair work. Cobalt HSS for increased heat resistance DIN 1897 dimensions for interchangeability Self‑centring tip for burr‑free starts 6 mm cylindrical shank for secure clamping Precision and durability for consistent production Constructed from HSS‑Co, the tool delivers elevated wear and heat resistance, enabling sustained cutting performance during repeated spot‑weld removal. The combination of profil‑ground flutes and a right‑hand cutting geometry ensures stable chip evacuation and consistent hole quality. Compliance with DIN 1897 provides mechanical compatibility with standard toolholders and fixtures, reducing setup time and supporting uninterrupted machining cycles. Cleaner results and less rework through self‑centring design A self‑centring centre point permits precise initial engagement at the weld nugget, preventing lateral wandering and limiting burring. This results in burr‑free extraction of weld spots, which minimises the need for additional finishing work. The cylindrical 6 mm shank fits common chucks and collets, so machine integration is straightforward and changeover remains efficient. Practical application across workshop and repair tasks Ideal for bodyshops, fabrication shops and maintenance operations, the tool excels where spot welds must be removed without compromising surrounding material. The right‑hand cutting action and profile grinding reduce heat buildup and improve surface condition after drilling. For operations that prioritise throughput and repeatable quality, the drill supports faster turnaround and fewer corrective steps. Handling recommendations and integration into workflows Secure clamping of the 6 mm shank and appropriate speed selection for cobalt high‑speed steel preserve edge life and dimensional accuracy. Regular inspection for wear and adherence to standard sharpening practices prolong service life and maintain hole quality. The robust design reduces downtime from tool changeovers and simplifies inventory management when stocked as a standard item. Contact Metav Werkzeuge for tailored advice on using the TECWERK spot weld drill in serial production or workshop repairs — our specialists at Metav Werkzeuge can help select the right tooling and supply from Emmerich. Technical data Article number: 2000860123NW SKU: 2000860123NW Brand: TECWERK Facts Diameter: 6 mm Overall length: 66 mm Shank diameter: 6 mm Standard: DIN 1897 Special features Material: HSS‑Co (cobalt high‑speed steel) Profile‑ground flutes Right‑hand cutting geometry Cylindrical shank, 6 mm Self‑centring centre point For exact, burr‑free removal of spot welds FAQ Is this drill suitable for automotive bodywork spot weld removal? The TECWERK spot weld drill is designed specifically for extracting spot welds in sheet metal and is commonly used in automotive bodywork and repair tasks. What shank size is required for standard chucks? The tool has a 6 mm cylindrical shank, compatible with standard chucks and collet systems that accept a 6 mm diameter shank. How does the self‑centring tip improve results? The self‑centring centre point ensures precise engagement with the weld nugget, reducing lateral slip and producing a cleaner, burr‑free finish. Is the material specified for high‑speed applications? Made of HSS‑Co, the drill tolerates higher cutting temperatures and is suitable for sustained operations where heat resistance and edge stability are required. What standard does the tool follow for dimensions? Dimensions conform to DIN 1897, providing interchangeability with fixtures and toolholders designed to that standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise, burr-free removal of spot welds thanks to a HSS-Co construction and a self-cutting centre tip designed to work to DIN 1897. Order the TECWERK spot weld drill directly via Metav Werkzeuge or contact our consultants for advice. TECWERK Spot Weld Drill D.8 × L40 mm — HSS‑Co, DIN 1897, cylindrical shank TECWERK Spotle Drill D.8×L40 mm is a high-precision spot-weld drill for exact, burr-free extraction of spot welds in metal fabrication and repair HSS-Co construction for extended tool life Dimensions compliant with DIN 1897 Self-cutting centre tip for exact centring Cylindrical shank, Spotle Drill configuration Consistent cutting performance for workshop use The drill is manufactured from HSS‑Co, a cobalt-alloy high-speed steel that offers improved wear and heat resistance compared with plain high-speed grades. This material choice supports repeated drilling operations without rapid degradation, which reduces tool changes and downtime. Profile-ground flutes and right-hand cutting geometry ensure stable chip formation and predictable cutting forces, contributing to consistent hole quality across series production and repair tasks. Clean, burr‑free extraction of spot welds Equipped with a self-cutting centre tip, the tool is optimised for removing spot welds with minimal secondary finishing. The geometry is tailored to pull material away cleanly rather than tearing, producing burr-free holes that save subsequent deburring time. This characteristic is particularly valuable in automotive body repair and sheet-metal joining work where surface integrity and fit are critical. Standardised dimensions and secure clamping Produced to DIN 1897 dimensions, the drill’s overall length and diameter conform to a robust international standard, simplifying tool selection and replacement. The cylindrical shank and Spotle Drill shank version enable secure clamping in common drill chucks and holders, ensuring concentricity and reducing run-out. Together with the profile-ground finish, these features support repeatable accuracy and help maintain hole tolerance in demanding workshop environments. Contact Metav Werkzeuge for availability and technical guidance on the TECWERK spot weld drill — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000860127NW SKU: 2000860127NW Product: Spot weld drill D.8 × total L40 mm, HSS‑Co, shank Spotle Drill Manufacturer: TECWERK Facts Diameter: 8 mm Total length: 40 mm Material: HSS‑Co Standard: DIN 1897 Special features Profile-ground flutes Right-hand cutting Self-cutting centre tip Cylindrical shank (Spotle Drill) For exact, burr-free removal of spot welds FAQ What materials is this spot weld drill suitable for? The TECWERK spot weld drill (SKU 2000860127NW) is designed for drilling out spot welds in standard sheet-metal applications; material compatibility is supported by its HSS‑Co construction, which offers good wear resistance for common ferrous metals. What does HSS‑Co mean for tool life? HSS‑Co denotes cobalt-alloy high-speed steel; in the TECWERK spot weld drill this provides increased heat resistance and durability compared with standard HSS, extending tool life under repetitive drilling conditions. How does the self-cutting centre tip improve results? The self-cutting centre tip centres the drill on the weld spot and cuts rather than tears, enabling burr-free extraction and reducing the need for secondary finishing operations. Is the shank compatible with standard chucks? Yes, the cylindrical shank in the Spotle Drill configuration is compatible with typical drill chucks and holders, enabling secure clamping and improved concentricity during use. What does conformity to DIN 1897 mean for users? Conformity to DIN 1897 ensures the drill’s dimensions follow a recognised standard, simplifying replacement ordering and guaranteeing predictable fit and performance in standard holders and tool systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the HSS‑Co alloy and DIN 1897 dimensions for consistently precise, burr‑free reaming of spot welds; the Vario shank ensures secure clamping and straightforward integration into standard chucks. Order the drill directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Spot Weld Drill Ø8 × 44 mm — HSS‑Co, Vario shank The TECWERK Spot Weld Drill Ø8 × 44 mm is a cobalt high‑speed steel drill designed for accurate, burr‑free removal of spot welds in sheet‑metal fabrication and repair. HSS‑Co for extended wear resistance DIN 1897 dimensions for industry fit Profile‑ground for precise cutting Self‑cutting centre for burr‑free holes Vario shank for secure clamping Precision that reduces rework and maintains component integrity Manufactured from HSS‑Co (cobalt‑alloyed high‑speed steel), this spot‑weld drill is built for elevated thermal stability and sustained edge retention during repetitive operations. The flute geometry is profile‑ground, which produces a consistent cutting action and reduces vibration; as a result, surface finish is improved and secondary deburring steps are minimised. Conformance with DIN 1897 provides dimensional reliability so that the tool fits common holders and machining setups without guesswork. These technical decisions translate directly into fewer rejects and lower rework time on the shop floor. Clean, burr‑free holes that speed up assembly processes Equipped with a self‑cutting centre and right‑hand cutting geometry, the cutter is optimised to remove spot welds precisely while producing minimal burr. The combination of a pointed centre and accurate cutting angles means the weld cap is opened and extracted rather than torn, which preserves surrounding material and reduces finishing effort. For workshops handling automotive panels, body repair, or light fabrication, this capability delivers faster cycle times and a more reliable fit for downstream joining or welding operations. Robust clamping and straightforward integration into production The Vario shank version provides secure seating in a wide range of chucks and holders, improving concentricity and reducing runout during use. With a straightforward Ø8 mm diameter and an overall length of 44 mm, the tool is compatible with many standard machining set‑ups and hand‑held drivers used in repair bays and light industrial environments. Specification choices were made for practical longevity: the material and geometry are engineered to balance tool life and cutting performance, offering an economical solution for medium‑volume production and specialised maintenance tasks. For workshop‑grade spot weld removal using TECWERK’s HSS‑Co design, contact Metav Werkzeuge for purchasing and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000860128NW SKU: 2000860128NW Brand: TECWERK Facts Diameter: 8 mm Overall length: 44 mm Standard: DIN 1897 Special features Material: HSS‑Co (cobalt high‑speed steel) Profile‑ground flutes Right‑hand cutting Cylindrical shank with self‑cutting centre point Vario shank version Intended use: exact, burr‑free reaming of spot welds FAQ What materials can this drill be used on? The TECWERK Spot Weld Drill Ø8 × 44 mm is intended primarily for sheet‑metal assemblies and is optimised for removing spot welds without producing significant burrs. Does the HSS‑Co alloy require special cutting speeds? Yes; the HSS‑Co composition used in this spot‑weld drill supports higher cutting temperatures and extended tool life compared with standard high‑speed steel, so cutting parameters can be adjusted for efficient removal while maintaining the tool’s lifespan. Is the Vario shank compatible with standard chucks and holders? The Vario shank design is intended for secure clamping in common drill chucks and holders, ensuring good concentricity and reduced runout during operation. Can the self‑cutting centre be resharpened? Resharpening options depend on workshop capabilities; the geometry of the self‑cutting centre is best maintained by professional regrinding services to retain the original performance of the TECWERK spot weld cutter. What does DIN 1897 signify for this tool? DIN 1897 indicates that the tool’s dimensions and tolerances conform to a recognised industry norm, ensuring predictable fitment and interchangeability with standard tooling fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of HSS‑Co durability, DIN 1897 dimensional conformity and a self-cutting centre point for precise, burr-free removal of spot welds; order via Metav Werkzeuge or contact our advisers for specialist guidance. TECWERK Spot-weld Drill Ø8 × 79 mm (HSS‑Co) with 8 mm Shank A TECWERK Spot-weld Drill Ø8 × 79 mm (HSS‑Co) engineered for exact, burr‑free removal of spot welds in metal fabrication and maintenance workshops. HSS‑Co construction for high wear resistance DIN 1897 profile-ground geometry Self-cutting centre point for burr-free removal 8 mm cylindrical shank, right-hand cutting Precision, fast and burr-free spot-weld removal The combination of HSS‑Co alloy and a profile-ground flute geometry delivers clean, repeatable results when reaming out weld spots. The self-cutting centre point centres automatically and removes the welded nub without producing secondary burrs; this reduces downstream finishing time and minimises rework. For production environments where consistency matters, the geometry reduces oscillation and ensures a steady cutting action, shortening cycle times and improving throughput. Robust material and geometry for extended tool life Manufactured from HSS‑Co (cobalt-enhanced high-speed steel), the tool offers improved wear resistance and greater tolerance to elevated cutting temperatures compared with standard HSS. The robust cutting geometry and hardened core preserve edge stability during demanding sequences, extending service intervals and lowering total tooling cost per part. A uniform drill profile helps maintain hole quality over many cycles, supporting predictable maintenance scheduling. Fits standard holders and reduces set-up time Compliance with DIN 1897 means the dimensions match commonly used toolholders and fixtures, simplifying integration into existing toolsets. The 8 mm shank provides secure clamping in standard chucks, while the right-hand cutting design ensures compatibility with conventional machine spindles. These design choices reduce set-up time, decrease the number of tool changes and support faster job changeovers on the shop floor. Safer, cleaner results and dependable sourcing Cleaner holes with minimal burr formation lower the need for manual deburring, improving operator safety and speeding final inspection. The consistent hole quality delivered by this spot-weld drill supports reliable assembly and reduces scrap rates. Metav acts as a practical precision partner and quality filter for the European market, offering transparent supply from Emmerich and a broad range of workshop solutions to keep production moving. Contact Metav Werkzeuge for availability and technical advice on the TECWERK spot‑weld drill 2000860124NW; specialist assistance is available by phone or email. Technical data Article number: 2000860124NW Label: Schweißpunktbohrer D.8xGesamt-L.79mm HSS-Co Schaftausf.8mm TECWERK Manufacturer: TECWERK Measurements and core specifications Diameter: 8 mm Overall length: 79 mm Shank diameter: 8 mm Norm: DIN 1897 Features and special design Material: HSS‑Co Profile-ground Right-hand cutting Self-cutting centre point Cylindrical shank Application: exact, burr-free reaming of spot welds FAQ How does the drill produce burr-free holes? The self-cutting centre point and profile-ground flute geometry on the TECWERK spot-weld drill ensure centred entry and smooth metal displacement, resulting in largely burr-free removal of the weld nub. Which holder fits the tool? The tool has an 8 mm shank and dimensions conforming to DIN 1897, so the TECWERK spot‑weld drill 2000860124NW fits standard chucks and common toolholders without special adapters. Is this tool suitable for repetitive production use? Yes; the HSS‑Co material and ground profile provide improved durability and heat resistance, making the drill suitable for repeated operations where consistent hole quality is required. What standard does the tool follow? Dimensions and tolerances are specified to DIN 1897, ensuring interchangeability and predictable fitment in standard workshop equipment. What cutting direction and point type are featured? The drill is right-hand cutting and equipped with a self-cutting centre point, designed specifically for efficient reaming-out of spot welds. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com