Torque Wrench

Digital Torque Adjustable Wrench 1/4", 0.9–30 N·m Mini version 230 mm The Digital Torque Adjustable Wrench 1/4", 0.9–30 N·m Mini version 230 mm is a compact precision torque wrench designed for controlled tightening in assembly, maintenance and calibration tasks, ideal where space is limited and repeatable accuracy is required. Compact 230 mm length for tight spaces High accuracy: clockwise 2%, counter-clockwise ±2.5% Digital Peak and Real-Time modes with LED and tone Stores up to 99 datasets for traceable results Precise torque control for reliable assembly With a measurement range of 0.9–30 N·m and 1/4" drive, this compact torque wrench delivers consistent and reproducible Torque for small fasteners. The tool meets DIN EN ISO 6789, ensuring that Calibration and performance expectations are aligned with industry standards. The proven Accuracy (2% clockwise, ±2.5% counter-clockwise) reduces the risk of over- or under-tightening, which protects Components and increases joint reliability. Time-saving digital functions and traceability The built-in Digital Display offers Peak (Spitzenwertsmodus) and Real-Time modes so the user can choose the best feedback method for each application. An audible Signal Tone and LED Indicator notify when the preset Torque value is reached. Up to 99 Datensets can be stored for documentation and quality control, supporting efficient workflows and traceable documentation during repetitive tasks. Compact design that fits constrained workspaces At 230 mm overall length in the Mini version, the design enables access to confined assembly areas where larger tools would not fit. The short form factor combined with a clear display and ergonomic handle helps maintain control when working in cramped Positions, making it suitable for Electronics, Automotive trim work and precision Maintenance. Built for practical use and low maintenance Right- and Left-hand operation is supported, and the device operates on AAA or AA batteries (not included) with an automatic shut-off after 5 minutes to preserve battery life. The rugged construction and intuitive controls reduce setup time and minimise training requirements, delivering a dependable digital torque solution for workshop and industrial Environments. About the brand and purchasing confidence Metav IndustryLine produces tools focused on durability and measurement reliability. Choosing Metav IndustryLine means investing in tools designed for Professional use and supported by technical advice and service. For questions about suitability, calibration or complementary specifications, METAV Werkzeuge offers expert consultation and direct support. Strong recommendation: For precision tasks requiring reliable, traceable torque control, choose the Metav IndustryLine Digital Torque Adjustable Wrench — for advice contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Bezeichnung: Digital Torque Adjustable Wrench 1/4", 0.9–30 N·m Mini version 230 mm Marke: Metav IndustryLine SKU: MWK.9211-1400 Standard: DIN EN ISO 6789 Direction: Right- and Left-hand operation Accuracy: Clockwise 2%, Counter-clockwise ±2.5% Measurement modes: Peak mode and Real-Time mode Indicators: Signal tone and LED indicator when preset torque reached Units: ft-lb, in-lb, N·m, kgf·cm Data storage: 99 datasets storable Power: AAA or AA batteries (not included) Auto shut-off: After 5 minutes Length: 230 mm Drive size: 1/4" Torque range: 0.9–30 N·m Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the torque range of the Digital Torque Adjustable Wrench from Metav IndustryLine? The Digital Torque Adjustable Wrench 1/4", 0.9–30 N·m Mini version 230 mm by Metav IndustryLine offers a torque range of 0.9–30 N·m, suitable for precise tightening of small fasteners. Can the Metav IndustryLine Digital Torque Adjustable Wrench operate in both directions? Yes, the Metav IndustryLine Digital Torque Adjustable Wrench supports Right- and Left-hand operation and provides accurate readings in both directions with specified Accuracy values. How does the memory function help in professional use of the Digital Torque Adjustable Wrench? The Digital Torque Adjustable Wrench from Metav IndustryLine can store up to 99 datasets, enabling traceable documentation of torque values and simplifying repetitive assembly tasks and quality checks. Which batteries are required for the Metav IndustryLine Digital Torque Adjustable Wrench? The Metav IndustryLine Digital Torque Adjustable Wrench uses AAA or AA batteries (not included) and includes an automatic shut-off after 5 minutes to conserve power. Is the Digital Torque Adjustable Wrench compliant with calibration standards? The Metav IndustryLine Digital Torque Adjustable Wrench conforms to DIN EN ISO 6789, aligning its performance with recognised calibration and measurement standards.

Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm is a precision electronic torque tool designed for controlled fastening and maintenance tasks in workshops and industrial environments. Precise accuracy: 2% clockwise measurement Reversible operation for right and left threads Peak and real-time measurement modes Stores up to 99 measurement records Audible tone and LED when preset torque reached Exceptional Precision for Critical Fastening Tasks The Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm delivers consistent results thanks to its compliance with DIN EN ISO 6789 and its high measurement accuracy. With a certified accuracy of 2% clockwise and ±2.5% counterclockwise, users gain measurable confidence when tightening fasteners to specification. This level of control reduces the risk of over- or under-tightening and supports quality assurance processes in assembly and repair work. Clear Feedback and Flexible Measurement Modes Operation is simplified by both a Peak Mode and a Real-Time Mode, plus an audible signal and LED indicator that activate when the preset torque is reached. The tool supports four units (ft‑lb, in‑lb, N‑m, kgf‑cm), enabling compatibility with international specifications. The ability to switch between modes and units makes the wrench suitable for diverse tasks, from precision electronics to automotive service. Practical Design for Workshop Use The 1/4" drive and 350 mm length provide a practical balance of reach and leverage for small to medium assemblies. Battery operation accepts AAA or AA cells (not included) and the automatic shut-off after five minutes helps conserve power between uses. Memory for 99 data sets allows tracking of recent torques without external logging, streamlining quality checks and documentation in daily workflows. Built by Metav IndustryLine for Reliable Performance Metav IndustryLine combines industry standards and durable construction to create a tool that fits professional demands. The compact, ergonomic design supports repetitive use while maintaining measurement stability. Choosing this wrench means opting for a solution that aligns with workshop procedures and traceability needs, backed by a manufacturer focused on technical tools. Highly recommend the Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm from Metav IndustryLine for precision-critical assembly and maintenance; for technical advice or additional specifications contact METAV Werkzeuge directly — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp: +49 170 2837271 Technical data Bezeichnung: Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm Marke: Metav IndustryLine SKU: MWK.9211-1401 Standard: DIN EN ISO 6789 Direction: Right and Left rotation possible Accuracy: 2% clockwise, ±2.5% counterclockwise Measurement modes: Peak value mode and Real-time mode Signal: Audible tone and LED indicator at preset torque Units: ft-lb, in-lb, N-m, kgf-cm Memory: 99 data sets Battery type: AAA or AA batteries (not included) Automatic shut-off: After 5 minutes Drive: 1/4" Torque range: 1.5–30 Nm Length: 350 mm Hersteller / Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What torque range does the Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm cover? The Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm from Metav IndustryLine covers a torque range of 1.5 to 30 Nm, suitable for precision fastening tasks in electronics, mechanical maintenance, and light automotive work. Can the Metav IndustryLine Digital Torque Wrench measure in different units? Yes, the Metav IndustryLine Digital Torque Wrench supports four units — ft‑lb, in‑lb, N‑m and kgf‑cm — allowing measurements to be recorded and read in the unit required by your specification. How does the Digital Torque Wrench indicate when the preset torque is reached? The Digital Torque Wrench 1/4" 1.5–30 Nm 350 mm provides both an audible signal and an LED indicator when the preset torque value is reached, offering clear feedback during fastening operations. Is data logging available on this torque wrench? The Metav IndustryLine Digital Torque Wrench stores up to 99 data sets internally, enabling quick review of recent measurements without external devices. What power source does the Digital Torque Wrench use? This Digital Torque Wrench operates on standard AAA or AA batteries (not included) and features an automatic shut-off after five minutes to conserve battery life.

Torque Wrench 3/8" 10–60 Nm, Length 305 mm by Metav IndustryLine The Torque Wrench 3/8" 10–60 Nm, Length 305 mm is a precision tool designed to deliver controllable and repeatable torque for maintenance, assembly and repair tasks across workshop and industrial environments. Precise range 10–60 Nm for varied applications 3/8" Drive for professional sockets Accuracy ±3% according to DIN EN ISO 6789 Fine adjustment for exact torque setting Chrome-plated head for corrosion resistance Consistent torque for secure assemblies The calibrated mechanism provides a reliable torque window that reduces the risk of over- or under-tightening fasteners. With a 10–60 Nm working range and a compact overall length of 305 mm, this tool enables controlled tightening in confined spaces while maintaining the torque required for many mechanical and automotive applications. The clear scale and tactile ratchet confirm each setting, helping to avoid rework and component damage. Certified accuracy and bidirectional use Built to meet DIN EN ISO 6789, the device offers an accuracy of ±3%, reflecting consistent repeatability. The torque wrench is configurable for both clockwise and counterclockwise operation, which simplifies tasks that require loosening under controlled torque conditions. The supplied factory calibration certificate documents conformity and supports traceability for quality-focused workshops. Ergonomic design and durable finish A chrome-plated ratchet head improves resistance to wear and corrosion while an ergonomic handle ensures a firm grip during repetitive use. The integrated fine adjustment mechanism allows precise incremental settings so that the required torque can be dialled in smoothly. This combination of durability and handling comfort increases productivity and reduces fatigue during extended work periods. Ideal users and typical applications This torque wrench is aimed at professional mechanics, service technicians and maintenance teams who require a compact, accurate instrument for bolting tasks in automotive, machinery and plant maintenance. Its 3/8" drive fits common socket sets, making it suitable for component assembly, hose fittings and light structural work where precise torque application is essential. Why choose Metav IndustryLine tools Metav IndustryLine focuses on manufacturing tools that combine robust construction with practical, workshop-oriented features. Choosing this brand provides access to documented calibration, long-term availability of parts and competent support from METAV Werkzeuge. For assistance selecting the right tool or requesting additional technical data, the METAV team is available to advise by email, phone or WhatsApp. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 For reliable torque control choose the Metav IndustryLine torque solution and consult our specialists for application-specific guidance — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalized support. Technical information Torque Wrench 3/8" 10–60 Nm, Length 305 mm Brand: Metav IndustryLine SKU: MWK.9201-3810 Drive: 3/8" Torque Range: 10–60 Nm Length: 305 mm Standard: DIN EN ISO 6789 Accuracy: ±3% Usable in both directions: Left/Right Chrome-plated head Fine adjustment for precise torque setting Supplied with factory calibration certificate Hersteller / Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the torque range of the Torque Wrench 3/8" 10–60 Nm, Length 305 mm from Metav IndustryLine? The Torque Wrench 3/8" 10–60 Nm, Length 305 mm by Metav IndustryLine provides a working range from 10 to 60 Nm, suitable for many light to medium mechanical fastening tasks. Is the Torque Wrench 3/8" 10–60 Nm, Length 305 mm calibrated and documented? Yes, the Torque Wrench 3/8" 10–60 Nm, Length 305 mm is supplied with a factory calibration certificate and conforms to DIN EN ISO 6789, ensuring traceable accuracy. Can the Torque Wrench 3/8" 10–60 Nm, Length 305 mm be used for loosening as well as tightening? The Metav IndustryLine torque wrench supports bidirectional use (left/right), enabling controlled torque application for both tightening and controlled loosening operations.

Digital Torque Wrench 1/2", 17–340 Nm, 590 mm Digital Torque Wrench 1/2", 17–340 Nm, 590 mm is a precision 1/2" drive torque wrench designed for workshop and industrial torque control applications, offering reliable measurement modes and data memory for repeatable tightening results. Precision ±2% clockwise accuracy Reversible operation for right and left tightening 99 datalog entries and dual measurement modes Audible signal and LED indicator at set torque Precision and consistent results for critical assemblies The Digital Torque Wrench delivers controlled torque application through a high-accuracy sensor that meets DIN EN ISO 6789, ensuring repeatable fastening and reduced rework. With an accuracy of ±2% clockwise and ±2.5% counterclockwise, this tool enables consistent clamp forces across repetitive tasks. The availability of four units (ft‑lb, in‑lb, N‑m, kgf‑cm) makes it versatile for international specifications, while memory for 99 datasets supports traceable tightening sequences and streamlined documentation. Comfortable handling and workflow efficiency for workshops Ergonomic length and a 1/2" drive provide the necessary leverage for fast, controlled operation in maintenance and assembly environments. The wrench supports right and left rotation, a peak mode and a real‑time mode to match different tightening strategies. Audible tone and LED feedback mark the torque event clearly, and automatic shutdown after five minutes conserves battery life when using standard AAA or AA cells. These features combine to reduce operator errors and speed up repetitive bolting tasks. Standards compliance and manufacturer support you can trust Built to industry standards, the tool's conformity to DIN EN ISO 6789 offers assurance for calibration and quality audits. The brand Metav IndustryLine stands behind the product with dedicated technical advice and after‑sales support. For detailed calibration procedures or compatibility checks with specific fasteners, the manufacturer's guidance ensures correct application and extended tool life through recommended handling and maintenance practices. Strong recommendation: choose the Metav IndustryLine Digital Torque Wrench for precise, auditable torque control and contact METAV Werkzeuge for technical advice or application support — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Technical Data Digital Torque Wrench 1/2", 17–340 Nm, 590 mm Brand: Metav IndustryLine SKU: MWK.9211-1230 Compliance: DIN EN ISO 6789 Rotation: Right and Left operation Accuracy: Clockwise ± 2%, Counterclockwise ± 2.5% Measurement Modes: Peak value mode and Real‑time mode Indicators: Signal tone and LED display when preset torque is reached Units: ft‑lb, in‑lb, N‑m, kgf‑cm Data Storage: 99 datsets storable Power: AAA or AA batteries (not included) Auto Power Off: Automatic shutdown after 5 minutes Manufacturer: Hersteller / Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What torque range does the Digital Torque Wrench from Metav IndustryLine cover? The Metav IndustryLine Digital Torque Wrench 1/2", 17–340 Nm, 590 mm covers a torque range from 17 to 340 Nm, suitable for medium to heavy assembly tasks that require precise torque application. Can the Metav IndustryLine Digital Torque Wrench record torque values for later review? Yes, the Digital Torque Wrench 1/2", 17–340 Nm, 590 mm by Metav IndustryLine stores up to 99 datsets, enabling review and traceability of tightening operations for quality control purposes. Is the Digital Torque Wrench suitable for left‑handed fasteners and reverse tightening? The Metav IndustryLine Digital Torque Wrench 1/2", 17–340 Nm, 590 mm supports right and left rotation, so it can be used for reverse tightening and left‑handed fasteners without loss of accuracy. Who can I contact for technical questions about the Metav IndustryLine Digital Torque Wrench? For additional technical data or application advice regarding the Digital Torque Wrench 1/2", 17–340 Nm, 590 mm from Metav IndustryLine, please contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271

Digital Torque Wrench 3/8", 3–60 N·m, 420 mm Digital Torque Wrench 3/8", 3–60 N·m, 420 mm is a precision tool for controlled torque application in automotive maintenance, assembly and workshop use High accuracy: ±2% clockwise Four torque units: N·m, ft·lb, in·lb, kgf·cm 99 memory slots for recorded values Audible tone and LED at set torque 3/8" drive with 3–60 N·m range Precision and Repeatability for Critical Fastening The Digital Torque Wrench delivers consistent Torque with an accuracy of ±2% clockwise and ±2.5% counterclockwise, ensuring repeatable results when securing fasteners. Its Digital Display and selectable units make interpretation straightforward, while the Peak and Real‑Time Modes let technicians choose whether to capture the maximum achieved value or monitor torque continuously. This level of control reduces the risk of under‑ or overtightening and supports quality requirements in Repair, Maintenance and Production. Clear Feedback and Data Retention to Avoid Rework Operators benefit from immediate audible and visual feedback: a Signal Tone and LED Indicator show when the preset torque is reached, preventing guesswork during tightening. The instrument stores up to 99 Data Sets, enabling traceability of measured values and easing documentation for quality checks. Automatic shutoff after five minutes preserves battery life; the tool accepts AAA or AA Batteries, simplifying replacement in the field. Ergonomic Design Suited to Workshop Tasks With a 3/8" Drive, a measurement Range of 3–60 N·m and a Length of 420 mm, this wrench balances reach and control for engine work, chassis tasks and general mechanical assembly. The compact Drive and clear scale allow access in confined spaces while maintaining leverage for accurate torque application. Materials and construction focus on service durability so the tool performs reliably under routine workshop conditions. Manufacturer Quality and After‑sales Support Metav IndustryLine designs the instrument for professional use and integrates standards compliance to support safe operation. The product specification references compliance with DIN EN ISO 6789 and offers both right‑ and left‑hand operation. For specialised advice, calibration questions or assistance in choosing the right torque range, METAV Werkzeuge provides competent consultation and technical support to ensure the tool matches the intended application. Strong recommendation: Choose the Metav IndustryLine Digital Torque Wrench for accurate, traceable torque control — for personalised technical guidance contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Digital Torque Wrench 3/8", 3–60 N·m, 420 mm Brand: Metav IndustryLine SKU: MWK.9211-3810 Standards: DIN EN ISO 6789 Direction: Right and Left rotation possible Accuracy: Clockwise ±2%, Counterclockwise ±2.5% Measurement Modes: Peak value mode and Real‑Time mode Indicators: Signal tone and LED display when preset torque is reached Units: ft·lb, in·lb, N·m, kgf·cm Memory: 99 data sets storable Battery type: AAA or AA batteries (not included) Automatic shutoff: After 5 minutes Manufacturer: Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Manufacturer: Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What torque range does the Digital Torque Wrench from Metav IndustryLine cover? The Digital Torque Wrench 3/8", 3–60 N·m, 420 mm from Metav IndustryLine covers a range from 3 to 60 N·m, providing suitable coverage for common automotive and workshop fastening tasks. Can the Metav IndustryLine Digital Torque Wrench save measurement values? Yes, the Metav IndustryLine Digital Torque Wrench stores up to 99 data sets, allowing recorded values to be retained for traceability and documentation needs. Which batteries are required for the Metav IndustryLine Digital Torque Wrench? The Metav IndustryLine Digital Torque Wrench operates on AAA or AA batteries; batteries are not included with the product. Is the Digital Torque Wrench suitable for left‑handed tightening? The Metav IndustryLine Digital Torque Wrench supports both right‑ and left‑hand operation, with stated accuracies for clockwise and counterclockwise directions. Who can I contact for technical questions about the Metav IndustryLine Digital Torque Wrench? For technical data, application advice or calibration information regarding the Metav IndustryLine Digital Torque Wrench, contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271.

Torque Wrench 1/2", 40–220 Nm Length 500 mm — Metav IndustryLine 1/2-inch Torque Wrench The Torque Wrench 1/2", 40–220 Nm Length 500 mm is a professional 1/2-inch torque wrench designed for precise tightening of fasteners in automotive, industrial and maintenance applications. DIN EN ISO 6789 certified torque tool Accuracy ± 3 % for repeatable results Reversible use left/right for versatile applications Chrome-plated head for corrosion resistance Fine adjustment for exact torque setting Precision and reliability for critical assemblies The Torque Wrench 1/2", 40–220 Nm Length 500 mm delivers consistent Torque across its full range, making it ideal when accuracy matters. Built to meet DIN EN ISO 6789, this tool ensures traceable performance and reliable calibration. The torque scale and Fine Adjustment mechanism allow stepwise setting and reduce the risk of over- or under-tightening, which protects components and enhances assembly safety. Robust design for daily workshop use A Chrome-plated Head and sturdy construction support long service life even under heavy use. The wrench's 500 mm length provides the necessary leverage for the 40–220 Nm range while maintaining control and ergonomics. The reversible square drive enables operation in both directions without changing tools, increasing efficiency during repetitive tasks. Who benefits from this torque wrench Maintenance technicians, garage professionals and assembly engineers will value the combination of Accuracy ± 3 % and practical features such as the reversible drive and fine-tuning. For jobs that require documented torque values, the supplied Factory Certificate supports quality control and traceability in professional environments. Manufacturer and quality assurance Metav IndustryLine produces hand tools focused on durability and precision. Customers choose Metav IndustryLine for consistent manufacturing standards, dependable calibration information and practical service options. The included Factory Certificate and compliance with established standards underline the manufacturer's commitment to quality. Choose the Metav IndustryLine torque wrench to ensure precise and repeatable torque application in your workshop — for technical questions or tailored advice contact our team at Metav Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Torque Wrench 1/2", 40–220 Nm Length 500 mm Marke: Metav IndustryLine SKU: MWK.9201-1240 Torque range: 40–220 Nm Drive size: 1/2-inch Length: 500 mm Compliance: DIN EN ISO 6789 Accuracy: ± 3 % Direction: reversible left/right Head finish: chrome-plated head Adjustment: fine adjustment for precise setting Supply: Factory Certificate Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What torque range does the Torque Wrench 1/2", 40–220 Nm Length 500 mm cover? The Torque Wrench 1/2", 40–220 Nm Length 500 mm from Metav IndustryLine covers a torque range of 40 to 220 Nm, suitable for medium to high torque applications in automotive and industrial settings. Is the Metav IndustryLine torque wrench suitable for both tightening and loosening? Yes, the Metav IndustryLine Torque Wrench 1/2", 40–220 Nm Length 500 mm is usable in both directions (left/right), allowing versatile use for tightening and controlled loosening where torque control is required. Does the torque wrench come with calibration documentation? The Torque Wrench 1/2", 40–220 Nm Length 500 mm is supplied with a Factory Certificate, providing documented calibration information for quality control and traceability. How accurate is the Metav IndustryLine torque wrench? The Metav IndustryLine Torque Wrench 1/2", 40–220 Nm Length 500 mm offers an accuracy of ± 3 %, ensuring repeatable torque application across its specified range. Can I get technical support for the Torque Wrench 1/2", 40–220 Nm Length 500 mm? For technical questions or additional data regarding the Torque Wrench 1/2", 40–220 Nm Length 500 mm (Metav IndustryLine), please contact METAV Werkzeuge for expert advice via info@metav-werkzeuge.com or +49 2822 7131930.

Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm von Metav IndustryLine Der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm ist ein fein einstellbarer Drehmomentschlüssel für präzise Anzugsarbeiten in Werkstatt, Montage und Instandhaltung. Drehmomentbereich 5–20 Nm Genauigkeit ±3 % gemäß DIN EN ISO 6789 Feineinstellung mit 0,25 Nm Skalierung Beidrichtung Links/Rechts nutzbar Verchromter Drehkopf und Werkszertifikat Präzise Drehmomentkontrolle für wiederholbare Resultate Dank der Feineinstellung mit einer Skalierung von 0,25 Nm ermöglicht dieses Werkzeug eine sehr feine Anpassung des gewünschten Drehmoments. Das ist besonders nützlich, wenn empfindliche Bauteile oder genormte Schraubverbindungen mit exakter Kraft angezogen werden müssen. Anwender profitieren von reproduzierbaren Ergebnissen, weil die Einstellung einfach abzulesen und genau einzustellen ist. Die kombinierte Wirkung von feiner Skalierung und der angegebenen Genauigkeit ±3 % sorgt dafür, dass Montageprozesse sicherer und dokumentierbarer werden. Robuste Ausführung für den täglichen Einsatz Die Konstruktion mit verchromtem Drehkopf erhöht die Korrosionsbeständigkeit und die Lebensdauer des Werkzeugs. Zusätzlich ist der Schlüssel für den Betrieb in Beidrichtung (Links/Rechts) ausgelegt, was Flexibilität bei verschiedenen Anwendungen bietet. Die solide Bauweise reduziert Wartungsaufwand und sorgt für eine konstante Handhabung bei wiederkehrenden Arbeiten in Werkstatt oder Produktion. Typische Einsatzfelder und Anwendernutzen Dieses Drehmomentwerkzeug eignet sich für Feinmechanik, Fahrrad- und KFZ-Reparaturen, Maschinenmontagen sowie für elektrische Installationen, in denen kontrolliertes Anziehen von Schrauben erforderlich ist. Für Mechaniker und Techniker bedeutet das weniger Nacharbeiten und geringeres Risiko von Überdrehen; für Qualitätsverantwortliche ergibt sich eine verbesserte Dokumentation der Montagequalität durch das mitgelieferte Werkszertifikat. Herstellervertrauen und Service durch Metav Die Marke Metav IndustryLine steht für präzise, praxisorientierte Werkzeuge. Produkte dieser Linie werden mit Prüfprotokollen ausgeliefert, die die Einhaltung relevanter Normen dokumentieren. METAV Werkzeuge bietet darüber hinaus umfangreiche und kompetente Beratung: Sind Sie sich nicht sicher, ob das Werkzeug Ihre Anforderungen erfüllt, oder benötigen Sie ergänzende technische Daten, dann hilft der Kundenservice gerne weiter. Kontaktinformationen finden sich am Ende dieses Textes. Empfehlung: Setzen Sie auf den Drehmomentschlüssel von Metav IndustryLine für präzise und sichere Anzugsarbeiten – bei Fragen oder für Beratung erreichen Sie unseren Fachsupport per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Technische Daten Bezeichnung: Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm Marke: Metav IndustryLine SKU: MWK.9201-1405 Drehmomentbereich: 5–20 Nm Länge: 245 mm Skalierung: 0,25 Nm Genauigkeit: ±3 % Norm: DIN EN ISO 6789 Verwendbar in Beidrichtung: Links/Rechts Verchromter Drehkopf Feineinstellung für präzise Drehmomenteinstellung Lieferung mit Werkszertifikat Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ Wie genau ist der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm von Metav IndustryLine? Der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm von Metav IndustryLine hat eine Genauigkeit von ±3 % und ist nach DIN EN ISO 6789 gefertigt, was präzise und verlässliche Messergebnisse gewährleistet. Kann der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm in beide Richtungen verwendet werden? Ja, der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm ist für den Betrieb in Beidrichtung (Links/Rechts) ausgelegt und bietet dadurch flexible Einsatzmöglichkeiten. Wie fein lässt sich das Drehmoment am Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm einstellen? Die Feineinstellung des Drehmoments erfolgt in 0,25 Nm Schritten, wodurch der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm auch für besonders empfindliche Anwendungen geeignet ist. Liegt dem Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm ein Prüf- oder Werkszertifikat bei? Ja, der Drehmomentschlüssel 1/4", 5-20 Nm Länge 245 mm wird mit einem Werkszertifikat geliefert, das die geprüften Messergebnisse dokumentiert. Bei weiteren Fragen oder für eine persönliche Beratung wenden Sie sich bitte an METAV Werkzeuge: 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271

Drehmomentschlüssel 1/2" 60–330 Nm, Länge 590 mm Der Drehmomentschlüssel 1/2" 60–330 Nm, Länge 590 mm ist ein robustes Anzugsmomentwerkzeug für präzise Verschraubungen in Werkstatt und Industrie. Drehmomentbereich 60–330 Nm Antrieb 1/2" für gängige Steckschlüssel Feineinstellung für exakte Justage Verchromter Drehkopf für hohe Robustheit Lieferung mit Werkszertifikat Präzise Drehmomentkontrolle für professionelle Anwendungen Der Drehmomentschlüssel 1/2" 60–330 Nm, Länge 590 mm bietet einen weiten Drehmomentbereich 60–330 Nm und erfüllt die Norm DIN EN ISO 6789, wodurch besonders hohe Anforderungen an Messgenauigkeit und Rückverfolgbarkeit abgedeckt werden. Die spezifizierte Genauigkeit ± 3 % sorgt dafür, dass das gewünschte Anzugsmoment zuverlässig erreicht wird. Für Anwender bedeutet das weniger Nacharbeiten, konstante Ergebnisse und erhöhte Sicherheit bei sicherheitsrelevanten Verschraubungen. Robuste Bauweise und einfache Handhabung für den Alltag Die Konstruktion mit verchromtem Drehkopf und einer Gesamtlänge von Länge 590 mm bietet Langlebigkeit und ausreichenden Hebel für kraftvolle Anwendungen. Die eingebaute Feineinstellung ermöglicht das stufenlose Einstellen des Soll-Drehmoments, während die Nutzung in Links/Rechts beide Drehrichtungen abdeckt. Dadurch reduziert sich der Kraftaufwand bei wiederkehrenden Montagearbeiten und die Bedienung bleibt effizient und ergonomisch. Vielseitige Einsatzgebiete und passende Zielgruppen Dieses Werkzeug eignet sich für Kfz-Werkstätten, industrielle Montagebetriebe, Servicetechniker und ambitionierte Profi-Heimwerker. Der abgedeckte Drehmomentbereich ermöglicht Arbeiten an Motorbaugruppen, Fahrwerksteilen und größeren Maschinenverbindungen. Nutzer profitieren von einem Instrument, das sowohl im täglichen Werkstattbetrieb als auch bei periodischen Wartungsarbeiten präzise Ergebnisse liefert. Qualitätssicherung, Zertifikate und Support durch Metav Lieferung inklusive Werkszertifikat dokumentiert Kalibrierung und Prüfwerte. Die Einhaltung von DIN EN ISO 6789 bedeutet, dass das Mess- und Einstellverhalten des Werkzeugs dokumentiert und nachprüfbar ist. Metav IndustryLine steht für industrielle Qualitätsprodukte; METAV Werkzeuge als Händler ergänzt das Angebot mit kompetenter Beratung und technischem Support, damit Anwender die passende Ausrüstung wählen und zielgerichtet einsetzen können. Für alle, die Wert auf Präzision legen, empfiehlt sich der Kauf des Metav IndustryLine Drehmomentschlüssels wegen seiner geprüften Genauigkeit und robusten Bauweise — bei Fragen zur Anwendung oder für ergänzende technische Daten hilft METAV Werkzeuge gerne weiter: info@metav-werkzeuge.com · Telefon +49 2822 7131930 · WhatsApp +49 170 2837271 Technische Daten Drehmomentschlüssel 1/2" 60–330 Nm, Länge 590 mm Marke: Metav IndustryLine SKU: MWK.9201-1260 Drehmomentbereich: 60–330 Nm Antrieb: 1/2" Länge: 590 mm Norm: Nach DIN EN ISO 6789 Genauigkeit: ± 3 % Verwendbar in beiden Drehrichtungen Links/Rechts Verchromter Drehkopf Feineinstellung für präzise Drehmomenteinstellung Lieferung mit Werkszertifikat Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ Was deckt der Drehmomentschlüssel 1/2" 60–330 Nm von Metav IndustryLine ab? Der Drehmomentschlüssel 1/2" 60–330 Nm von Metav IndustryLine deckt Schraubfälle mit einem Anzugsmoment von 60 bis 330 Nm ab und ist damit für schwere Werkstatt- und Industriemontagen geeignet. Wie genau ist der Metav IndustryLine Drehmomentschlüssel 1/2" 60–330 Nm? Der Metav IndustryLine Drehmomentschlüssel 1/2" 60–330 Nm besitzt eine Genauigkeit von ± 3 % und entspricht der Norm DIN EN ISO 6789, was konstante und nachvollziehbare Ergebnisse sicherstellt. Ist der Drehmomentschlüssel 1/2" 60–330 Nm in beide Richtungen nutzbar? Ja, der Drehmomentschlüssel 1/2" 60–330 Nm von Metav IndustryLine ist Links/Rechts verwendbar und somit für Anzugs- und Löstätigkeiten einsetzbar. Wird der Metav IndustryLine Drehmomentschlüssel 1/2" 60–330 Nm kalibriert geliefert? Der Metav IndustryLine Drehmomentschlüssel 1/2" 60–330 Nm wird mit Werkszertifikat geliefert, das Kalibrierungs- und Prüfwerte dokumentiert.