140mm Ejector Pin for Morse Tapers MK1+2, DIN 317 - TECWERK
Reliable taper ejection with DIN 317 conformity and a 140 mm overall length ensures quick, repeatable tool changes; order directly via Metav Werkzeuge or consult our specialists for application advice. Taper Drift DIN 317 (for Morse Tapers MK1+2) – 140 mm, TECWERK The Taper Drift DIN 317 provides a standardised solution for ejecting tool tapers from machine spindles, engineered for use with Morse tapers MK1 and MK2 in workshop and industrial environments Complies with DIN 317 standard For Morse tapers MK1 and MK2 Overall length 140 mm for secure engagement Faster, more reliable tool removal for continuous workflows A standardised taper drift designed to DIN 317 reduces downtime during tool changes by delivering consistent ejection performance. Conformity to DIN 317 and compatibility with tool tapers according to DIN 228 mean the device fits common tapers without the need for custom adapters. This predictable fit improves throughput in production environments where frequency of changeovers affects cycle times. The combination of standard compliance and targeted design supports machine uptime and predictable maintenance scheduling, which is particularly beneficial for small series production and general workshop operations. Practical handling and workshop durability that supports safety Equipped with an overall length of 140 mm, the extractor offers sufficient reach and leverage for clean removal of seated tapers, while remaining compact for easy storage in tool cabinets. The simple geometry suited to Morse tapers MK1 and MK2 ensures controlled release of the tool shank, reducing the risk of damage to the spindle taper or cutting tool. The design emphasises ease of use: a single-handed placement and a firm strike transfer the force directly along the axis, ensuring safe ejection without twisting or wedging. For technicians seeking an uncomplicated workshop solution, this drift combines straightforward handling with the robustness expected in everyday use. Clear compatibility notes and guidance for selection The tool is specified for Morse tapers MK1 and MK2, and is intended for use with standard tool tapers as per DIN 228 design. For teams less familiar with taper systems: Morse tapers are self-locking when fully seated, and require an axial impact to disengage; a purpose-made taper extractor distributes that impact reliably. Selecting a drift that matches the taper system prevents misalignment and wear. Where applications demand other taper sizes or specialised interfaces, refer to technical specifications to confirm fit; Metav Werkzeuge can provide clarification on compatibility and alternative part options. For reliable, standard-compliant taper ejection choose the TECWERK DIN 317 taper drift — check availability with Metav Werkzeuge or discuss the exact application with our technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832761NW Brand: TECWERK Product type: Taper drift Facts Overall length: 140 mm Pack unit: 1 Standard: DIN 317 Special features Suitable for: Morse tapers MK1+2 Intended for: tool tapers according to DIN 228 Conforms to: DIN 317 FAQ What taper sizes does this extractor support? The extractor is suitable for Morse tapers MK1 and MK2, providing a direct fit for those common taper sizes. Is the drift compliant with any standards? Yes, the tool is manufactured to DIN 317 and intended for use with tool tapers as specified in DIN 228. How long is the extractor and what does that mean in practice? The overall length is 140 mm, offering sufficient reach for secure placement and effective axial ejection without excessive overhang. Can the drift be used on non-Morse tapers? The design is optimised for Morse tapers MK1 and MK2; use on other taper systems is not recommended without confirming dimensional compatibility. How is the tool best used to avoid damage to the spindle? Place the extractor squarely against the taper shoulder and apply axial impact; the standard geometry ensures force is directed along the axis to avoid twisting or wedging. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
190mm Drawbar For Tool Taper DIN 317 For Morse Taper MK3 - TECWERK
Reliable removal of MT3 tapers with a standards-based design: DIN 317 conformity and a 190 mm overall length ensure consistent extraction performance and workshop compatibility; order directly via Metav Werkzeuge or consult our specialists for application advice. Extractor DIN 317 for Morse taper MT3 — TECWERK, 190 mm overall length The Extractor DIN 317 for Morse taper MT3 is a purpose-built taper extractor for the safe and efficient removal of MT3 tool tapers in general machining and workshop environments. Conforms to DIN 317 For Morse taper MT3 Overall length 190 mm Fits standard tool tapers Faster, standard-compliant extraction for workshop efficiency Conformity to DIN 317 guarantees a predictable fit with tool tapers made to recognised standards, reducing downtime caused by seized or difficult-to-remove tapers. The standardised design supports consistent engagement with Morse taper MT3 connections, helping to streamline removal cycles and avoid ad‑hoc improvised methods. By relying on a purpose-made extractor, workshops benefit from a straightforward, repeatable process that complements existing tooling workflows and minimises the risk of incidental damage to the taper or holder. Compact length and design improve accessibility and handling With an overall length of 190 mm, this taper extractor provides sufficient reach for most benches and machine setups without excess bulk. The length balances access to deeper-seated tapers while remaining manageable for manual handling, making removal operations quicker and less awkward. The tool’s geometry is intended to mate with common tool taper interfaces, supporting quick seating and withdrawal actions that limit operator effort and contribute to safer, more controlled handling during maintenance or tool changes. Clear compatibility and guidance for safe use The product is specified for Morse taper MT3 applications and references compatibility with tool tapers to DIN 228, so selection is straightforward for those working with standardised spindles and toolholders. For users less familiar with taper systems: a Morse taper is a conical connection that transfers torque and centres tooling by friction; an extractor applies axial force to disengage the taper without levering against the spindle. Regular cleaning of the taper contact surfaces and careful alignment of the extractor prior to use minimise the likelihood of jamming and preserve the integrity of mating surfaces for dependable service life. For a standards-compliant TECWERK taper extractor and expert application advice, contact Metav Werkzeuge in Emmerich for prompt supply and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832762NW Standard: DIN 317 Overall length: 190 mm Suitable for: Morse taper MT3 Packaging unit: 1 Core data Total length: 190 mm Packaging unit: 1 Special features Conforms to DIN 317 For tool tapers to DIN 228 Fits standard tool tapers Intended for Morse taper MT3 FAQ Which taper sizes is this extractor intended for? The extractor is specified for Morse taper MT3 applications and is designed to work with standard tool tapers produced to DIN 228. Is the extractor compliant with recognised standards? Yes; the tool conforms to DIN 317, ensuring compatibility with standardised taper interfaces and predictable engagement behaviour. Can this extractor be used with other Morse taper sizes? The extractor is intended for Morse taper MT3; use with other Morse sizes is not guaranteed and should only be attempted if compatibility is verified by measurement or manufacturer guidance. How should the extractor be maintained? Keep the taper contact surfaces clean and free of swarf and lubricants, store the extractor dry, and inspect for deformation before use to maintain reliable operation. What is the exact length of the extractor? The taper extractor has an overall length of 190 mm, providing balanced reach for common workshop setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
225mm Ejector for Morse Taper MK4 DIN 317 - TECWERK
Robust compliance with DIN 317, compatibility with Morse taper MT4 and a 225 mm overall length combine to deliver dependable removal of tool tapers while reducing machine downtime; order the taper drift directly via Metav Werkzeuge or ask our consultants if needed. Taper Drift DIN 317 for Morse taper MT4 – 225 mm (TECWERK) The Taper Drift DIN 317 for Morse taper MT4 is a purpose-made tool for releasing tool tapers from standardised spindles and holders in workshops and maintenance shops. Complies with DIN 317 For Morse taper MT4 Overall length 225 mm Fits standard tool tapers Faster, safer taper removal for productive workshops Engineered to the DIN 317 guideline, this taper drift delivers consistent engagement with standardised tapers, cutting the time needed to free lodged tool tapers and minimising potential damage to holders. The controlled geometry of the taper drift ensures predictable force transmission, so maintenance cycles run more smoothly and toolroom throughput is improved. The clear standard conformity also simplifies planning and spare-part logistics. Designed for compatibility with standard tool tapers Conformity with both DIN 317 and compatibility for tool tapers to DIN 228 means the tool matches common workshop interfaces. Compatibility with Morse taper MT4 guarantees the correct fit for a wide range of drills and arbors that use this taper size. For technicians and buyers this standard alignment reduces the need for trial-and-error, enabling quick identification of the correct extraction tool and streamlining inventory management in the workshop. Practical handling that reduces downtime At 225 mm overall length the drift provides sufficient reach for deeper-seated tapers while remaining compact enough for routine handling. The simple geometry allows controlled, repeatable strikes that reduce the risk of skewed impacts and consequent damage. In everyday use the extraction tool is straightforward to store and combine with existing tool-maintenance workflows, supporting quicker turnarounds and less idle machine time — a direct efficiency gain for production and service teams. Who benefits and where it fits best Maintenance technicians, toolroom staff and production engineers benefit from a standardised, rugged extraction tool that integrates with common holders and arbors. The combination of recognised standards, practical length and straightforward use makes the drift well suited to industrial workshops, service benches and tooling rooms where repeatable, low-risk extraction is essential. For specific application queries, Metav Werkzeuge’s consultants can advise on compatibility and availability. For availability and tailored advice on the TECWERK taper drift for Morse taper MT4, contact Metav Werkzeuge for rapid delivery from Emmerich and technical guidance – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832763NW Standard: DIN 317 Type: Taper drift Label: Austreiber DIN 317 MK4 z.Werkzeugkegel Manufacturer: TECWERK Facts Total length: 225 mm Packaging unit: 1 Special features For tool taper according to DIN 228 Suitable for Morse taper MT4 Fits standard tool tapers Complies with DIN 317 FAQ Is this taper drift compatible with MT4 tool holders? The taper drift described is designed for Morse taper MT4 and is supplied by TECWERK (SKU 4000832763NW), making it suitable for MT4 arbors and holders that adhere to the corresponding standards. What does the DIN 317 standard guarantee? DIN 317 specifies dimensions and functional requirements for extraction devices of this type; the Taper Drift DIN 317 for Morse taper MT4 meets these requirements, ensuring standardised fit and predictable performance. Will the 225 mm length reach deep-seated tapers? With an overall length of 225 mm, the drift provides additional reach compared with shorter variants, allowing access to deeper-seated tapers while remaining manageable for routine workshop use. Which users and workplaces benefit most from this tool? The extraction tool is aimed at maintenance technicians, toolroom personnel and production engineers who work with Morse tapers and require a reliable, standards-compliant method to dislodge tool tapers without risk to holders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
320mm Austreiber Halbautomatisch mit Austreiblappen Einhandbedienung, DIN 228 - TECWERK
Austreiber MK1-3 HA z.Werkzeugkegel — Austreiber, halbautomatisch Der Austreiber MK1-3 HA z.Werkzeugkegel ist ein halbautomatischer Auszieher zur schonenden und schnellen Lösung von Morsekegeln MK1–MK3 in Werkzeugspindeln, entwickelt für den täglichen Einsatz in Werkstatt und Fertigung. Halbautomatische Einhandbedienung mit Fingerschutz Geeignet für Morsekegel MK1–MK3 Löst Werkzeugkegel schonend ohne Schlag Mit Austreiblappen für einfachen Eingriff Passend für Werkzeugkegel nach DIN 228 Sichere Entnahme ohne Schlag für empfindliche Spindeln Der Austreiber MK1-3 HA z.Werkzeugkegel ermöglicht durch die Hebelbetätigung ein kraftvolles, aber kontrolliertes Lösen des Kegels, wodurch Spindel-Beschädigungen vermieden werden. Die Konstruktion sorgt dafür, dass der Kegel ohne Schlag aus der Aufnahme gezogen wird; das reduziert Stillstandzeiten und senkt das Risiko teurer Reparaturen. Anwender profitieren von konstanter Prozesssicherheit bei wiederkehrenden Wechseln von Werkzeugen. Effiziente Einhandbedienung mit integriertem Fingerschutz Die Einhandbedienung ermöglicht schnelles Arbeiten auch bei hoher Taktzahl, während der integrierte Fingerschutz die Arbeitssicherheit erhöht. Bedienvorgänge lassen sich zügig und ergonomisch durchführen, was die Prozesszeit verkürzt und gleichzeitig Ermüdung reduziert. Die halbautomatische Mechanik vereinfacht Abläufe in der Spanntechnik und macht den Austreiber ideal für Werkstätten mit hohem Werkzeugwechsel-Aufkommen. Kompatibilität und Anwendungen in der Werkstatt Das Gerät ist speziell ausgelegt für Morsekegel der Größen MK1 bis MK3 und entspricht der Norm DIN 228, wodurch die Kompatibilität zu gängigen Werkzeugkegeln sichergestellt ist. Typische Einsatzbereiche sind Fein- und Schwerbearbeitung, Fräserei und Maschinenwartung, wo schonendes Ausziehen von Spannkegeln gefordert ist. Die einfache Handhabung macht den Austreiber auch für kleine Serien und Serviceeinsätze geeignet. Schutzmechanismen und Montagevorteile Der Austreiber verfügt über Austreiblappen, die das Einsetzen und Führen beim Ausziehen vereinfachen, sowie eine Hebelmechanik, die sanften Krafteintrag gewährleistet. Diese Merkmale reduzieren die Belastung von Präzisionsflächen und verlängern die Lebensdauer von Spindel und Werkzeugkegel. Dadurch sinken Folgekosten und Wartungsintervalle werden planbarer. Empfehlung: Den Austreiber direkt bei NORDWEST / TECWERK über Metav Werkzeuge anfragen und Montageberatung per E-Mail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen Produktmerkmale Artikelnummer: 4000832764NW Bezeichnung: Austreiber MK1-3 HA z.Werkzeugkegel Typ: Austreiber, halbautomatisch Norm: DIN 228 Hersteller: TECWERK Verpackungseinheit: 1 Daten Gesamtlänge: 320 Besonderheiten Halbautomatisch Für Werkzeugkegel DIN 228 Einhandbedienung mit Fingerschutz Mit Austreiblappen Löst Werkzeugkegel ohne Schlag Passend für Morsekegel MK1–MK3 FAQ Was unterscheidet diesen Austreiber von manuellen Modellen? Der Austreiber MK1-3 HA z.Werkzeugkegel von TECWERK bietet eine halbautomatische Einhandbedienung und einen integrierten Fingerschutz, wodurch das Lösen von Kegeln schneller und sicherer erfolgt als bei reinen Handwerkzeugen; Artikelnummer 4000832764NW erleichtert die Nachbestellung. Für welche Morsekegelgrößen ist das Gerät geeignet? Das Werkzeug ist kompatibel mit Morsekegeln MK1 bis MK3 und ausgelegt für den Einsatz mit Werkzeugkegeln nach DIN 228. Schützt das Gerät die Spindel vor Schäden? Ja, die Hebelmechanik sorgt für ein kontrolliertes Lösen ohne Schlag, wodurch Belastung und Verschleiß an der Spindel reduziert werden. Ist der Austreiber für den täglichen Einsatz in Werkstatt und Fertigung geeignet? Durch die robuste Mechanik, die ergonomische Einhandbedienung und die Merkmale wie Austreiblappen ist das Produkt von TECWERK für häufigen Einsatz in Werkstatt und Produktionsumgebungen ausgelegt. Wie kann technische Beratung oder Ersatzteilinformation angefragt werden? Technische Fragen und Anfragen zu Ersatzteilen können über Metav Werkzeuge gestellt werden; für den Artikel 4000832764NW stehen Ansprechpartner und technische Beratung zur Verfügung. Hersteller: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
380mm Ejector MK4-6 Semi-Automatic For DIN 228 Tool Taper, One-Hand Operation - TECWERK
Combining half‑automatic operation, a shock‑free lever release and compatibility with Morse tapers MK4–6, this extractor reduces spindle damage and speeds up tool changes. Order directly via Metav Werkzeuge for reliable supply or contact their consultants for tailored application advice. Morse Taper Extractor MK4–6 (half‑automatic) by TECWERK — one‑hand release for tool tapers Morse Taper Extractor MK4–6 (half‑automatic) is a half‑automatic extractor designed to release Morse tapers MK4–6 from spindles gently, preventing impact damage during tool changes. Half‑automatic release for MK4–6 tapers One‑hand operation with finger guard Shock‑free lever action protects spindles Fits standard DIN 228 tool tapers Faster, safer tool removal for uninterrupted production The half‑automatic lever mechanism provides a controlled, shock‑free release of the tool taper, which directly minimises the risk of spindle damage. By avoiding hammering or abrupt ejection, the device reduces downtime for repairs and preserves spindle bearings. This means fewer unscheduled maintenance stops and more predictable production flow, improving overall equipment effectiveness in the workshop. Ergonomic single‑handed operation that prioritises safety Equipped with an integrated finger guard and an ejector flap, the extractor enables swift, one‑hand operation for routine tool changes. The design reduces manual effort and enhances operator safety during repetitive tasks. In practical terms, this improves handling for both experienced machinists and workshop staff with less specialist training, while maintaining consistent removal force and protecting both tool and machine. Clear compatibility and straightforward handling for the workshop Built to the DIN 228 standard and suitable for Morse tapers MK4–6, the extractor (total length: 380 mm) fits standard tool tapers and the associated spindles. The lever actuation disengages the taper without shock, preserving the spindle seating and reducing alignment issues. Where a precise, repeatable extraction method is required, this half‑automatic solution offers a predictable and efficient alternative to manual striking or improvised tools. For expert advice on the TECWERK half‑automatic extractor and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the right solution for the workshop. Technical data Article number: 4000832765NW Norm: DIN 228 Total length: 380 mm Suitable for: Morse tapers MK4–6 Packaging unit: 1 Facts Half‑automatic operation One‑hand operation with finger guard Ejector flap included Special features For tool tapers (DIN 228) Lever releases taper without impact; protects spindle Product type: half‑automatic extractor Manufacturer: TECWERK FAQ How does the extractor prevent spindle damage? The lever‑actuated, shock‑free release in the Morse Taper Extractor MK4–6 by TECWERK disengages the taper without impact, which protects the spindle seating and minimises wear on bearings. Which Morse taper sizes are supported? This extractor is designed for Morse tapers MK4–6 and conforms to DIN 228, ensuring compatibility with standard tool tapers in that size range. Is single‑hand operation possible and safe? Yes; the device features one‑hand operation with a finger guard and an ejector flap to allow safe, ergonomic removal of the tool taper. What is the total length of the extractor and is it suitable for bench use? The extractor has a total length of 380 mm, suitable for standard workshop and bench applications where MK4–6 tapers are used. What is the article number for ordering and identification? The article number is 4000832765NW, listed as the Morse Taper Extractor MK4–6 (half‑automatic) from TECWERK. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Austreiber KV z.Abstechhalter TECWERK
für Grundhalter Abstechen Weitere technische Eigenschaften: · Artikel: Austreiber KV
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com