Secure and ergonomic clamping and assembly aids that speed up production
Clamping and assembly aids provide stable, precise fixation of components during joining processes, enabling accurate alignment for operations such as bolting, riveting, welding or bonding and significantly reducing rework. These systems combine adaptable fixtures, positioning pins and quick clamps to maintain tight tolerances and ensure reproducible assembly results while relieving operators ergonomically. By cutting non-productive handling time and preventing part movement, they boost throughput and support consistent quality in both manual and automated workflows. Key applications include fixture-based jigs for welding and modular supports for complex assemblies, making them indispensable for efficient metalworking and industrial fabrication.
1" T-Slot Adapter Single, 1-5/8x1-1/2x1" Thread 7/8-9" - Vertex
Take advantage of dependable clamping performance and a compact form factor for efficient setup and secure hold in workshop fixtures — order the component directly via Metav Werkzeuge or consult our specialists for precise application advice. Vertex 3417I T-slot Nut — 1" T-slot, 7/8-9" thread A T-slot nut designed as a single clamping element for machine tables and fixtures, enabling secure anchoring in standard 1" T-slots for general workshop and industrial applications. Fits 1" T-slots for standard machine tables 7/8-9" threaded connection for secure fastening Compact size 1-5/8 × 1-1/2 × 1 in Dependable clamping that reduces setup time The T-slot nut delivers a robust anchoring solution for routine fixturing tasks where repeatable, vibration-resistant clamping is required. With a standard 1" T-slot compatibility and a 7/8-9" thread, the design supports common clamping bolts and studs, simplifying inventory and setup. The geometry of the slot nut ensures reliable load transfer to the table, which translates into fewer re-tightening cycles and less downtime during batch runs. This rational advantage improves throughput without compromising the quality of the hold. Compact form and practical handling for busy shops The component’s compact dimensions (1-5/8 × 1-1/2 × 1 in) keep the footprint minimal on crowded fixtures while still providing sufficient bearing area. Weighing 0.21 kg, the part is easy to handle during assembly and positioning yet substantial enough to stay put under normal machining loads. The single-unit supply means one piece is delivered per order item, providing flexibility for small repairs or selective replacement without bulk buying. For engineers planning fixture layouts, the modest size permits denser clamping patterns and greater access for tools. Clear compatibility and straightforward integration Designed for integration into standard clamping systems, this slot nut suits a wide range of table profiles used in milling, drilling and general-purpose machining. The 7/8-9" thread is compatible with common fastening hardware, reducing the need for adaptors. The simple shape and standardised dimensions help ensure predictable behaviour when combined with clamping bolts and studs, so planning forces and clearances becomes more straightforward. This practical compatibility supports efficient workflows in both production and maintenance environments. A reliable component from an established supplier As part of Vertex’s offering, the element benefits from established manufacturing practices that focus on fit and repeatability. Choosing standardised clamping components reduces procurement complexity and supports consistent assembly processes across multiple machines. The compact, standardised nature of this slot nut contributes to more predictable fixture performance, which in turn supports quality control and process stability in everyday operations. Contact Metav Werkzeuge in Emmerich for tailored application advice and reliable supply of Vertex components — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 for specific compatibility information Technical data SKU: 3417I GTIN: 4061905090226 ECLASS: 21029107 Dimensions: 1-5/8 × 1-1/2 × 1 in Thread: 7/8-9" T-slot size: 1" Weight: 0.21 kg Supplied as: single unit Facts Weight: 0.21 kg Thread: 7/8-9" T-slot size: 1" Dimensions (L × W × H): 1-5/8 × 1-1/2 × 1 in Special features Compatible with standard 1" T-slots Supplied individually for selective replacement Designed for machine table clamping FAQ What T-slot size does this nut fit? This slot nut is designed for a 1" T-slot, making it suitable for standard machine tables and fixtures that accept that profile. Which thread specification is provided on the nut? The component features a 7/8-9" thread, compatible with commonly used clamping bolts and studs for secure fastening. Is the item supplied as a set or single piece? The product is supplied individually, allowing targeted replacement or addition to existing fixture inventories. Can this T-slot nut be used in milling and drilling fixtures? Yes — the nut’s standard dimensions and thread make it suitable for general milling, drilling and fixture applications requiring reliable clamping. Who manufactures this component and what is the SKU? The part is manufactured by Vertex; the SKU is 3417I, and it is intended for use as a clamping insert in machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1" T-Slot Adapter Single, 3/4-10" Thread - Vertex
Take advantage of the combination of a standard 1" T-slot fit, a secure 3/4-10" threaded connection and compact design for dependable fixture assembly. Order the component directly via Metav Werkzeuge or contact our consultants for compatibility advice. T-slot nut (single) – 3/4-10" thread, 1" T-slot compatible by Vertex A single T-slot nut designed for secure clamping in standard 1" T-slots, suitable for use in workshop and industrial fixturing applications. Single T-slot profile for standard 1" T-slots Threaded 3/4-10" for secure mounting Compact weight 0.2 kg eases handling SKU 3436I for simple reordering Reliable, repeatable clamping for everyday setups The compact T-slot nut offers a practical solution where repeatability and straightforward assembly are priorities. Its standard 1" T-slot geometry ensures compatibility with common machine tables and fixture rails, reducing setup time and simplifying inventory. The short, robust profile is intended to deliver consistent alignment when used with appropriately sized studs or bolts, which supports predictable clamping behaviour across repeated operations. This efficiency contributes directly to reduced downtime and smoother production workflows. Secure fixing through a recognised thread standard A defined 3/4-10" thread provides a familiar and reliable interface for fastening components into machine tables and clamping systems. Using an established thread form minimises uncertainty when selecting mating hardware and helps maintain clamping integrity under load. For assemblies where secure mounting is essential, the combination of a close-fitting T-slot body and a standard thread reduces play and ensures a tight connection between workpiece, fixture and table. Where precise torque or load ratings are required, the fastener should be combined with appropriate washers and correctly sized studs. Small footprint that keeps tooling agile With overall dimensions of 1-5/8 x 1-3/4 x 1" and a mass of 0.2 kg, this unit occupies minimal space in storage and on the table while remaining easy to handle during frequent changeovers. The compact form supports denser fixture layouts and can help lower the inventory footprint for spares. Reduced weight and a concise profile also make positioning quicker and less fatiguing for workshop personnel, which can improve throughput in high-mix environments where multiple clamping elements are exchanged frequently. Integration into workshop supply chains The item is supplied as a single unit and is identified as SKU 3436I, facilitating fast reordering and stock control. Using standard dimensions and thread forms allows straightforward procurement of complementary parts and replacement hardware. Metav Werkzeuge's distribution model aims to provide reliable availability and consistent product quality for shops and industrial buyers; the presence of clear labelling and standard specifications simplifies stock-keeping and reduces the risk of misorders. For applications requiring further technical detail, matching studs or full clamping kits can be specified to suit the intended assembly. For secure sourcing of Vertex components such as this single T-slot nut, contact Metav Werkzeuge for availability and delivery options — info@metav-werkzeuge.com or call +49 2822 7131930; our advisors will confirm fit and lead time Technical data Article number: 3436I GTIN: 4061905088483 Brand: Vertex Dimensions: 1-5/8 x 1-3/4 x 1" Thread: 3/4-10" Weight: 0.2 kg Designation: T-slot Unit type: single eClass: 21029107 T-slot width: 1" FAQ What T-slot size does this nut fit? The component is specified for a 1" T-slot and is intended for use with tables and rails that accept that slot dimension. Which thread is required for mating hardware? The fastening interface is 3/4-10", so studs, bolts and other mating parts should match that thread specification for correct engagement. Is this supplied as a single unit or in packs? The item is listed as a single unit, referenced by SKU 3436I for straightforward reordering. What information is needed to confirm suitability for a fixture? Confirm the table T-slot width (1"), the desired stud diameter and thread (3/4-10"), and any clearance requirements; the T-slot nut will then be matched to the assembly constraints. Can the load capacity be provided for design calculations? No specific load rating is supplied with the item; load capacity depends on the clamping assembly, the selected stud and installation practice—these must be calculated for each application. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/16" T-Slot Insert Single, 1-5/8x2x1-1/2" With 1-8" Thread - Vertex
Take advantage of a compact, industry‑grade clamping solution that combines precise compatibility with standard T‑slot dimensions and a reliable 1‑8" threaded bore for secure fastening; order directly via Metav Werkzeuge or consult our technical advisers for fitment and availability. T‑slot nut 3418I — single T‑slot clamping component, 1‑8" thread, fits 1‑1/16" slot (Vertex) The T‑slot nut 3418I is a single clamping insert designed for seating in a 1‑1/16" T‑slot, providing a straightforward fastening point for fixtures and workholding in machine tables and modular fixturing systems. Fits 1-1/16" T-slot 1-8" standard threaded bore Compact 1-5/8x2x1-1/2" profile Supplied as single item Consistent clamping where measurement and position matter The compact design delivers a predictable anchoring point for fixtures and tooling, promoting reproducible set‑ups and reduced downtime. With a 1‑8" threaded bore matching common bolt standards, the component permits direct use of standard fasteners, which simplifies procurement and speeds assembly. The modest weight of 0.25 kg minimises inertial effects during handling while keeping the part robust enough for frequent re‑positioning in a production environment. Integrates quickly into existing tables and fixtures Designed to match a 1‑1/16" T‑slot, the unit slides into standard slot profiles and locks in place with a threaded fastener, enabling immediate use without adapter pieces. The compact external profile (1‑5/8 x 2 x 1‑1/2") ensures compatibility with tight spacing on machine tables and modular fixtures. This straightforward integration reduces set‑up time and supports lean workshop workflows by enabling fast changeovers and flexible fixturing strategies. Precision, repeatability and practical benefits By providing a stable threaded anchor within the slot, the component contributes to repeatable clamping forces and consistent part positioning. The standardised thread interface reduces variability across batches of fasteners and tooling plates, supporting quality control routines and traceable assembly. Where tight tolerances and repeatable setups are required, this component acts as a simple but effective element of the overall process control chain. Supply confidence and partner support for production Sourced from Vertex, the part benefits from established manufacturing practices and a clear parts identity for procurement and stock management. Metav Werkzeuge complements this with European warehousing and logistics, reducing lead times and acting as a quality filter for workshop purchases. The relationship combines industrial reliability with practical supply assurances, which is particularly valuable for small and medium‑sized shops that require dependable, repeatable components without complex procurement steps. Contact Metav Werkzeuge for availability and technical guidance on integrating the T‑slot nut 3418I into existing fixtures — phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt advice and delivery options. Technical data SKU: 3418I GTIN: 4061905090059 Brand: Vertex Facts Dimensions: 1‑5/8 x 2 x 1‑1/2" T‑slot nominal fit: 1‑1/16" Thread: 1‑8" Weight: 0.25 kg Special features Designation: T‑slot nut Supplied: single item eClass: 21029107 FAQ What T‑slot size does this component fit? The T‑slot nut 3418I is specified for a 1‑1/16" T‑slot and is shaped to seat securely in that slot profile. Which thread standard is used for fastening? The part uses a 1‑8" threaded bore, compatible with standard imperial fasteners commonly used in workshop fixturing. Is the T‑slot nut 3418I suitable for modular fixturing plates? Yes, the Vertex T‑slot nut 3418I is intended for use in modular fixturing and machine table applications where a standard T‑slot anchor is required. How is the product supplied and identified for ordering? The component is supplied as a single item and can be ordered under SKU 3418I; Vertex is listed as the manufacturer for procurement and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/16" T-Slot Single - Vertex
Take advantage of a precision fit for 1‑1/16" T‑slots combined with a standard 3/4‑10 thread and compact dimensions for straightforward integration into existing clamping systems; order via Metav Werkzeuge or consult our specialists for application advice. T‑slot nut 3446I — compact 1‑1/16" insert with 3/4‑10 thread (Vertex) T‑slot nut 3446I is a compact clamping insert for machine tables and profile systems, designed to secure fixtures in a 1‑1/16" T‑slot while accepting a 3/4‑10 threaded fastener. Precision fit for 1‑1/16" T‑slots 3/4‑10 threaded fastening Compact dimensions 1‑5/8 x 2 x 1‑1/2" Consistent clamping performance for production environments The T‑slot nut is engineered to provide a reliable mechanical interface between a threaded fastener and the machine table or profile. With a designated 1‑1/16" slot size and a 3/4‑10 thread, this insert simplifies fixture assembly and reduces the time spent aligning clamps and bolts. The standardised thread ensures compatibility with common clamping hardware, while the accurate external geometry supports repeatable positioning. Such predictability preserves cycle times and contributes to a smoother production flow in workshop and industrial settings. Space-saving design that integrates easily into existing setups Compact dimensions of 1‑5/8 x 2 x 1‑1/2" and a low weight (0.23 kg) make the component suitable for confined fixture arrangements where clearance is limited. The short profile allows the insert to sit flush in the slot, reducing interference with tooling or workpieces. Because the element is made to industry norms, retrofitting into existing tables and modular frames is straightforward; the compact footprint often enables denser clamping layouts without sacrificing accessibility for adjustments or torqueing. Practical guidance and explanation for non-specialists For those less familiar with clamping technology: a T‑slot nut converts the T‑slot channel into a secure anchor point for bolts and threaded studs. The combination of a precisely matched slot width (1‑1/16") and a matched internal thread (3/4‑10) prevents lateral play and distributes clamping forces effectively. When selecting a fastener, ensure the bolt length and head style are appropriate for the intended clamp and that tightening torque is applied within recommended limits for the clamping assembly to avoid overloading smaller components. Typical applications and integration notes The insert is well suited to jigs, fixtures, milling tables and assembly benches where a compact, standardised anchoring point is required. Its specification supports repeatable setups in batch production and flexible fixturing in maintenance or prototyping environments. Where material data is required for specific corrosion or temperature considerations, refer to the component documentation; mechanical compatibility with the stated slot and thread sizes remains the primary determinant of fit and function for most installations. For fast, reliable ordering and expert application advice on Vertex clamping components, contact Metav Werkzeuge—our team can confirm suitability for specific fixtures and provide ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 3446I GTIN: 4061905091049 Manufacturer: Vertex Core technical data T‑slot size: 1‑1/16" Thread: 3/4‑10" Dimensions: 1‑5/8 x 2 x 1‑1/2" Weight: 0.23 kg Special features Configuration: single Product type: T‑slot nut Category: Vertex FAQ Is this insert compatible with a 1‑1/16" T‑slot? Yes. The T‑slot nut 3446I is specified for use in a 1‑1/16" T‑slot and provides a precision fit for standard table channels. What thread size does the nut accept? The component accepts a 3/4‑10 threaded fastener, making it compatible with common clamping bolts and studs that match this thread. Can this T‑slot nut be used on milling machine tables and modular profiles? Yes. The 3446I is designed for machine tables and profile systems where the stated slot and thread sizes are present. What are the physical dimensions and mass? Dimensions are 1‑5/8 x 2 x 1‑1/2", and the weight is 0.23 kg, making the insert compact and suitable for tight clamping arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/2" T-Slot Insert Single, 7/8" T-Slot, 3/4-10" Thread - Vertex
Benefit from a compact, reliable T-slot solution combining a 7/8" T-slot fit, a 3/4-10" threaded interface and a space-saving 1-1/2 x 1-1/2 x 1" profile; order the part directly via Metav Werkzeuge or ask our consultants for application advice. Vertex 3426I T-slot nut — compact single unit with 3/4-10" thread and 7/8" T-slot compatibility The Vertex 3426I is a single T-slot nut designed for secure clamping in machine tables and fixture assemblies, delivering straightforward integration where standard T-slot widths are used. Compatible with 7/8" T-slot tracks 3/4-10" threaded connection Compact 1-1/2 x 1-1/2 x 1" profile Reliable clamping for consistent machining results The 3426I delivers secure clamping through its matched thread and T-slot geometry, reducing movement and vibration during machining. The combination of a standard 3/4-10" thread and a 7/8" T-slot fit enables compatibility with many workholding systems, which supports consistent part quality and repeatable setup. For operations where fixture stability affects cycle times, this component helps maintain process reliability and reduces rework. Easy integration into existing fixtures and tooling Designed as a single unit for direct insertion into standard T-slots, the component simplifies retrofitting and layout changes. The specified dimensions (1-1/2 x 1-1/2 x 1") make it straightforward to calculate spacing and clearances in fixture design, while the threaded interface provides reliable engagement with clamping bolts. This plug-and-play characteristic shortens setup planning and supports efficient machine changeovers without complex adapters. Compact form and handling that speeds up assembly With a low mass, the unit is easy to handle during setup and maintenance, contributing to faster assembly times at the workbench. The compact profile keeps the clamping footprint minimal, permitting closer placement of clamping points when space is constrained. Technical images and a detailed drawing are provided for precise planning and verification of clearances before installation, helping to avoid costly trial-and-error on the shop floor. Choose the Vertex 3426I for dependable T-slot clamping and contact Metav Werkzeuge in Emmerich for purchasing advice and reliable delivery Technical Data SKU: 3426I GTIN: 4061905089206 Article designation: T-slot Variant: single Dimensions: 1-1/2 x 1-1/2 x 1" T-slot width: 7/8" Thread: 3/4-10" Weight: 0.175 kg ECLASS: 21029107 Manufacturer: Vertex Core specifications Dimensions (mm/inch): 1-1/2 x 1-1/2 x 1" T-slot compatibility: 7/8" Thread form: 3/4-10" Weight: 0.175 kg GTIN: 4061905089206 Special features Single-piece T-slot nut Includes technical drawing image Detail image available for inspection Category: Vertex FAQ What T-slot width does this nut fit? The nut fits a 7/8" T-slot, designed to engage securely with corresponding table or fixture slots. Which thread size is used for clamping bolts? A 3/4-10" thread is provided for bolt engagement, allowing standard clamping hardware to be used with the Vertex 3426I. What are the external dimensions for fixture planning? External dimensions are 1-1/2 x 1-1/2 x 1", useful for spacing clamps and calculating clearances in the fixture layout. Is a drawing available to verify fit before installation? A technical drawing and a detailed product image are available to confirm clearances and ensure correct integration into the workholding setup. What is the product weight for handling considerations? The unit weighs 0.175 kg, which supports easy handling during setup and reduces cumulative mass in larger fixture arrays. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/4" x 1-1/2" x 1" T-Slot Nut Single, 13/16" T-Slot, 3/4-10" Thread - Vertex
Take advantage of precise table fastening thanks to the combination of a compact footprint, standardised 3/4-10" threading and compatibility with a 13/16" T-slot. Order this fastening component directly via Metav Werkzeuge or consult our specialists for application advice. Vertex 3416I T-slot nut, single — 13/16" slot, 3/4-10" thread Vertex 3416I is a single T-slot nut engineered for secure clamping on machine and assembly tables, designed to engage a 13/16" T-slot and accept 3/4-10" threaded fastenings. Fits 13/16" T-slots 3/4-10" threaded connection Compact dimensions 1-1/4 x 1-1/2 x 1" Single-piece design, SKU 3416I Secure clamping with a small footprint The T-slot fastening offers a reliable way to fix workpieces and fixtures without modifying the table surface. With compact dimensions of 1-1/4 x 1-1/2 x 1", the component minimises obstruction on the table while providing a stable bearing surface. The integrated 3/4-10" thread is compatible with common imperial studs and bolts, enabling straightforward assembly into existing setups. This results in reduced setup time and consistent clamping pressure, which supports efficient cycle times and predictable fixture behaviour. Engineered for compatibility and quick installation Designed to engage a 13/16" T-slot, the part aligns easily in standard machine table grooves and can be positioned rapidly along the slot. The single-piece format simplifies handling and eliminates extra assembly steps, offering a pragmatic solution for repetitive fixturing tasks. The SKU 3416I denotes a ready-to-use unit that integrates with standard clamping kits and accessories, helping to standardise tooling across a workshop and reduce inventory complexity. Durable handling that supports workshop workflow At a weight of 0.142 kg, the component balances low mass with practical handling for frequent adjustments and reconfiguration. The single-piece construction reduces the risk of lost parts and streamlines maintenance routines, contributing to uninterrupted production. By combining a modest footprint with standardised threading and slot compatibility, the item enhances setup flexibility and supports a dependable production flow in metalworking and general workshop environments. For dependable table fastenings, request the Vertex 3416I through Metav Werkzeuge — our consultants at Metav are available to assess suitability and advise on integration with existing clamps and fixtures Technical Data Article number: 3416I GTIN: 4061905088773 Brand: Vertex Facts Weight: 0.142 kg Dimensions: 1-1/4 x 1-1/2 x 1" T-slot width: 13/16" Thread: 3/4-10" Special features Single-piece design (einzelnd) Intended for machine/assembly table T-slot use Compact form factor FAQ What T-slot width does this nut fit? The Vertex 3416I T-slot nut is designed to fit a 13/16" T-slot for secure engagement on compatible machine tables. Which thread standard is provided on the nut? The component accepts a 3/4-10" threaded fastener, enabling the use of common imperial studs and bolts with the Vertex 3416I. Can this part be used with existing clamping kits? The compact Vertex 3416I unit and its standardised 3/4-10" thread make it suitable for integration with most clamping kits that accommodate a 13/16" T-slot. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/4x1-1/2x1" T-Slot Block Single, 13/16" T-Slot, 5/8-11" Thread - Vertex
Take advantage of a compact, single-piece design that fits standard 13/16" T-slots and secures fixtures with a 5/8-11" thread; order the component directly via Metav Werkzeuge or contact our consultants for specification advice. Vertex T-nut »3435I« – single, for 13/16" T-slots with 5/8-11" thread Vertex T-nut »3435I« is a single-piece T-slot fastening element intended for secure clamping on machine tables and fixture systems; designed for standard 13/16" T-slots and supplied with a 5/8-11" threaded connection. Fits 13/16" T-slots 5/8-11" thread connection Single-piece design for stability Compact dimensions 1-1/4 x 1-1/2 x 1" Secure and standardised clamping for workshop fixtures This component provides a reliable interface between clamping hardware and the machine table by matching the 13/16" T-slot standard and delivering a 5/8-11" fastening thread. The exact match to common table profiles reduces lateral play and simplifies setup, while the standard thread means adoption with widely available studs and clamping bolts. The precise dimensions support repeatable positioning and a consistent clamping interface for jigs and fixtures. Compact form that speeds set-up and handling With compact external measurements of 1-1/4 x 1-1/2 x 1" and a net weight of 0.142 kg, the T-slot nut allows faster handling during assembly and reconfiguration of workholding. The low mass eases manual positioning and reduces the inertia involved in indexing fixtures, which contributes to shorter changeover times. The single-piece delivery format simplifies inventory management and removes ambiguity at installation. Procurement-ready specification and traceability The product is supplied as SKU 3435I and can be identified by GTIN 4061905088032, enabling straightforward procurement and stock control. The single-item configuration supports modular planning for fixture sets and ensures a repeatable supply unit for production environments. Manufacturer traceability under the Vertex brand facilitates quality checks and documentation for compliance in professional workshops. Contact Metav Werkzeuge in Emmerich for tailored advice on integration, quoting SKU 3435I or for assistance with compatible clamping hardware via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 3435I GTIN: 4061905088032 Manufacturer: Vertex Facts Weight: 0.142 kg Dimensions: 1-1/4 x 1-1/2 x 1" T-slot size: 13/16" Thread: 5/8-11" Special features Single-piece delivery Intended for standard machine T-slots ECLASS: 21029107 FAQ Which T-slot size does this component fit? The T-nut is designed for a 13/16" T-slot profile and aligns with common machine table standards. What thread does the fastening use? The component uses a 5/8-11" threaded connection for engagement with standard clamping studs. Is the item supplied individually or in sets? The part is supplied as a single-piece unit, sold under SKU 3435I. What are the external dimensions and weight? External dimensions are 1-1/4 x 1-1/2 x 1" and the weight is 0.142 kg. How can this part be referenced for ordering and inventory? Reference Vertex SKU 3435I or GTIN 4061905088032 when ordering or recording the component. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1-1/4x1-1/4x3/4" T-Slot Nut 3/4" T-Slot Single, 5/8-11" Thread - Vertex
Take advantage of a compact, workshop-ready fastening solution that pairs precision fit with straightforward installation: the combination of a 3/4" T-slot form, a standard 5/8-11" threaded connection and lightweight construction supports efficient fixturing and flexible inventory planning. Order the component directly via Metav Werkzeuge or ask the consultants for technical advice. Vertex T-Nute – T-slot nut with 3/4" T-profile and 5/8-11" thread The T-Nute is a compact T-slot nut designed to secure clamping elements and fixtures in 3/4" T-slots for general workshop and light industrial fixturing applications Designed for 3/4" T-slots 5/8-11" thread for secure fastening Compact 1-1/4" x 1-1/4" profile Lightweight at 0.102 kg Secure, standardised clamping for consistent results Engineered for repeatable positioning and secure hold, this T-slot fastening component mates with a 3/4" T-slot and accepts a 5/8-11" thread, providing a familiar interface for common clamping hardware. The standardised thread size ensures compatibility with widely used studs and bolts, reducing the need for special adapters and simplifying procurement. The precise geometry reduces lateral play in the slot, which improves clamping stability and contributes to predictable machining or assembly outcomes. This makes it suitable for jigs, holding fixtures and modular workholding systems where consistent component location is critical. Space-efficient form that keeps setups compact With nominal dimensions of 1-1/4" x 1-1/4" x 3/4", the fastener is designed to occupy minimal slot space while still delivering reliable clamping force. The compact footprint helps maintain close centre distances between fixtures and allows multiple fasteners to be placed in confined setups without introducing unnecessary bulk. The 0.102 kg mass supports easy manual handling during setup changes and keeps additional load on movable fixtures low. For workshops prioritising efficient use of plate area and rapid reconfiguration, the small form factor is an operational advantage. Simple integration for smoother workflow and stock management Compatibility with standard T-slot dimensions and a conventional threaded connection facilitates rapid integration into existing fixturing strategies; the component requires no bespoke machining to accept standard studs or bolts. The item is listed with SKU 3425I and GTIN 4061905087042 for straightforward ordering and inventory control. For procurement teams, this clarity in identification aids stock rotation and reduces administrative uncertainty. Visual aids such as a technical drawing and detailed images are available to support inspection and verification before installation, supporting efficient planning and reduced downtime. For dependable workshop fixturing, request availability and delivery through Metav Werkzeuge in Emmerich; technical enquiries can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 3425I GTIN: 4061905087042 Brand: Vertex Facts Weight: 0.102 kg Dimensions: 1-1/4" x 1-1/4" x 3/4" T-slot size: 3/4" Thread: 5/8-11" Special features Designation: T-Nute (T-slot nut) Packaging: single item Category: Vertex Image types: technical drawing, main view, detail view FAQ What slot size does this T-slot nut fit? The component fits a 3/4" T-slot; the specification is listed as a 3/4" T-slot form in the product data. Which threaded fasteners are compatible with the nut? Compatibility is provided via the standard 5/8-11" thread, which accepts common studs and bolts used in workshop fixturing. Is the product supplied individually or in sets? The item is supplied as a single piece, indicated in the product designation as a single unit. How can the item be ordered and identified for stock control? Order and inventory identification can use SKU 3425I and GTIN 4061905087042 for precise procurement and stock management. Are there visual resources to verify fit before purchase? Technical drawings and detailed images are available to support inspection and ensure correct fit in the intended T-slot configuration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1/2" T-Slot Nut Single 7/8x7/8x1/2", 3/8-16" Thread - Vertex
Take advantage of the combination of standardised thread form, compact dimensions and easy integration into modular clamping setups for reliable fixture assembly; order the part directly via Metav Werkzeuge or consult the Metav team for application advice. Vertex T-slot nut 3423I – 1/2" T-slot, 3/8-16" thread A Vertex T-slot nut 3423I supplied individually for secure clamping in 1/2" T-slot tables and modular fixture systems. Fits 1/2" T-slot tables 3/8-16" standard threaded bore Lightweight precision piece, 0.032 kg Supplied individually for flexible staging Secure, standardised clamping for modular tables The Vertex T-slot nut 3423I is designed to provide a dependable interface between clamping elements and machine tables that use 1/2" T-slots. Its 3/8-16" thread follows an established imperial standard, enabling compatibility with a wide range of studs and clamping components. By relying on standard thread geometry, the component reduces setup time and simplifies spare-part management across different fixtures. The compact form is optimised to sit flush in the slot while delivering repeatable clamping force when tightened. Compact dimensions that reduce mass and simplify handling With overall dimensions of 7/8 x 7/8 x 1/2" and a weight of 0.032 kg, this nut adds minimal mass to assemblies and is straightforward to position during setup. The small footprint supports dense fixture layouts and shortens repositioning time when rearranging work-holding configurations. The modest mass also limits inertial loads on lightweight fixtures, helping to preserve table accuracy during dynamic operations. For operations where fast changeovers and low added mass matter, the compact design supports efficient workflows. Standard thread and single-piece supply for flexible inventory The 3/8-16" thread offers broad interoperability with common studs and bolts used in clamping technology, allowing straightforward replacement or retrofitting without special fasteners. Supplied individually, the item is suited to bespoke retrofit projects and small-batch fixtures where precise quantities are required. The straightforward geometry and single-piece supply model help to minimise overstock while maintaining ready access to the necessary clamping elements for prototypes or small production runs. Contact Metav Werkzeuge in Emmerich for application guidance and to secure the Vertex T-slot nut 3423I for modular clamping systems—Metav Werkzeuge provides tailored advice and fast dispatch from its Emmerich quality hub (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 3423I GTIN: 4061905093234 Brand: Vertex Facts Dimensions: 7/8 x 7/8 x 1/2" Thread: 3/8-16" T-slot size: 1/2" Weight: 0.032 kg Supplied: single Special features Application: T-slot clamping systems ECLASS: 21029107 Packaging: individual piece FAQ What T-slot size is this nut made for? The nut is sized for a 1/2" T-slot, suitable for tables and fixtures that accept that slot width. Which thread standard does the component use? This item uses a 3/8-16" threaded bore, following a common imperial thread standard for clamping hardware. Is the product suitable for small-batch or prototype fixtures? Yes, the part is supplied individually, which makes it convenient for prototype builds and small-batch fixture assemblies. Can this nut be used with standard clamping studs and bolts? The 3/8-16" thread ensures compatibility with widely used studs and bolts in modular clamping systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1035mm Mobile Chip Collector, Trolley Mounted – Vertex
Benefit from the combination of a mobile design, low weight and straightforward integration to keep chip handling efficient and machine uptime high; order the VCC-19 mobile chip collector directly via Metav Werkzeuge or ask our consultants for guidance. VCC-19 mobile chip collector — mobile chip collector by Vertex, lightweight 1.5 kg A VCC-19 mobile chip collector engineered as a compact solution for collecting machining chips and metal swarf in workshops and toolrooms, ideal where mobility and quick repositioning are required. Mobile chip collector VCC-19 by Vertex Lightweight construction, only 1.5 kg Length 1,035 mm for easy integration Keep production flowing with compact chip collection The VCC-19 serves as a simple, focused device for chip collection close to machining centres, reducing the need for manual clearing and the associated production interruptions. Its compact footprint and measurable dimensions permit installation where space is limited, while the mobile concept supports rapid redeployment between workstations. By capturing swarf at source, the unit contributes to a cleaner work environment and lowers the frequency of unscheduled stops, supporting continuous operation and predictable cycle times. Flexible placement and fast workshop adaption Thanks to its low weight — just 1.5 kg — and elongated profile of 1,035 mm, the unit can be repositioned without heavy lifting equipment, enabling flexible workflow layouts. The design suits dynamic production cells where machines are frequently reconfigured; the collector integrates into existing setups without extensive modification. For production planners this means improved floor-space utilisation and simplified logistics when organising machining sequences or temporary workstations. Practical benefits: maintenance, handling and reliability Designed for routine workshop use, the collector focuses on straightforward operation and minimal upkeep. The simple configuration limits maintenance tasks and shortens service intervals, while the light construction eases handling during emptying and cleaning cycles. Specifying a compact, mobile collector like this supports shop-floor efficiency by lowering labour spent on chip management and by providing a repeatable, auditable process for waste handling that aligns with modern workshop routines. Contact Metav Werkzeuge in Emmerich for local availability and tailored advice on integrating the VCC-19 mobile chip collector into existing machining cells Technical data Article number: VCC-19 Manufacturer: Vertex Eclass: 21101790 GTIN: 4061905083662 Facts Weight: 1.5 kg Length: 1,035 mm Special features Mobile (fahrbar) Category: Vertex FAQ What is the primary purpose of this unit? The VCC-19 mobile chip collector is intended to gather and contain machining chips and swarf at the source, simplifying waste management on the shop floor. Can the unit be moved between machines easily? Yes, the collector’s mobile design combined with a low weight of 1.5 kg allows quick repositioning for temporary or reconfigurable workstation layouts. Which dimensions matter for integration into a production cell? Length is the primary consideration; the unit measures 1,035 mm, which should be checked against machine clearance and available floor space before positioning. Is the collector suitable for heavy-duty metalworking environments? The VCC-19 is intended for routine chip collection tasks; assess specific process demands against the unit’s compact design and handling characteristics to confirm suitability. How does this collector improve workshop efficiency? By reducing manual chip clearing and enabling rapid redeployment, the VCC-19 supports uninterrupted machining cycles and lowers labour time spent on housekeeping tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10mm T-Slot Nut Single, M8 Threaded - Vertex
Take advantage of a compact component that delivers a secure clamping interface and straightforward compatibility with standard 10 mm profiles; combine reliable fastening, precise fit and rapid procurement via Metav Werkzeuge for uninterrupted workshop workflows. Order the part directly through Metav Werkzeuge or consult the technical team for application guidance. 3412M — Vertex T-slot nut, compatible with 10 mm profiles and M8 threading 3412M is a compact T-slot nut designed for secure fixture in 10 mm T-slots, suitable as a single supply item for machine tables and fixture systems Compatible with 10 mm T-slot profiles M8 thread for secure fastening Compact dimensions 9.7x22x6 mm Supplied as a single item Precise engagement with 10 mm profiles for dependable fixturing The T-slot design offers a consistent mechanical interface that aligns with standard 10 mm slot profiles, ensuring repeatable positioning and reduced setup time. The low-profile, compact geometry (9.7x22x6 mm) minimises interference within assemblies while providing a stable bearing surface for clamping elements. In practice, this results in fewer alignment checks during part changeovers and a more efficient workflow when integrating the nut into modular fixturing systems. Secure M8 fastening that supports reliable clamping forces Threaded engagement is provided by an M8 thread, which is widely used in workshop and industrial fixtures for its balance of strength and accessibility. The internal thread allows conventional bolts or studs to be used without additional adapters, simplifying inventory and assembly processes. As a result, clamping assemblies can be tightened to the required torque using standard tools, delivering consistent holding forces and lowering the risk of slippage under operational loads. Engineered compatibility and supply reliability through a trusted channel Manufactured by Vertex, this component is intended for integration into fixture plates, machine tables and clamping rails where a standard T-slot nut is required. Supplied individually, the item is well suited for targeted replacements or small runs where bulk packs are unnecessary. Procuring the part via Metav Werkzeuge provides access to quality-controlled stock and the specialist know-how of a precision partner, supporting seamless procurement and installation in industrial and trade environments. For application advice or compatibility checks for the Vertex 3412M T-slot nut, contact Metav Werkzeuge to request a fitment recommendation or technical clarification through their sales and consultancy channels Technical Data Article number: 3412M GTIN: 4061905084157 EClass: 21029107 Core dimensions Overall size: 9.7 x 22 x 6 mm Slot compatibility: 10 mm Thread: M8 Features & suitability Type: T-slot nut, single item supply Brand: Vertex Images: technical drawing and product detail available FAQ What slot size is this nut designed for? The item is intended for 10 mm T-slot profiles and provides a standardised interface for fixture systems. Which thread size does the nut accept? The nut features an M8 internal thread suitable for common bolts and studs used in clamping assemblies. Can this part be used as a replacement in existing fixtures? Yes, the Vertex 3412M T-slot nut is designed for straightforward replacement in compatible 10 mm profile systems. Is the product supplied individually or in sets? This entry is supplied as a single item, indicated by the single-item designation for targeted replacements. Where can technical drawings be obtained? Technical drawings and product images are available via the product listing and can be consulted before installation to confirm fitment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11/16" T-Slot Block Single, 1-1/8x1-1/4x3/4" T-Nut, Threaded 1/2-12" & 1/2-13" - Vertex
Compact locking and fast integration are delivered by the combination of 11/16" T-slot compatibility, compact dimensions and dual-thread attachment; the result is reliable clamping with minimal setup time. Order the T-slot directly via Metav Werkzeuge or ask our consultants if needed. T-slot (single) – 11/16" T-nut, compact 1-1/8×1-1/4×3/4" (Vertex) The T-slot is a compact fixturing component intended for milling and drilling tables where an 11/16" T-nut is required, enabling secure workholding in confined setups. Compact 1-1/8×1-1/4×3/4" format Fits 11/16" T-slot Dual thread sizes: 1/2-12" & 1/12-13" Sold individually for flexible stocking Precise fixturing where space is limited For applications that demand accurate positioning without excess bulk, this component offers compact dimensions that reduce interference on the machine table while maintaining clamping strength. Compatibility with an 11/16" T-slot means the part integrates directly with many standard fixture systems used in shop and production environments. The modest footprint lessens the need for extensive repositioning of adjacent tooling, which shortens set-up times and improves repeatability — key advantages for batch work and frequent changeovers. Fast integration with common thread patterns The dual threads supported by the item enable rapid connection to a wide range of studs and clamping accessories. The specified 1/2-12" and 1/12-13" thread formats correspond to standard imperial fastenings commonly encountered in fixturing hardware, simplifying procurement and spare-part planning. For users unfamiliar with imperial thread nomenclature: the numbers denote the major diameter and thread count, so matching the correct stud ensures secure engagement and consistent clamping force. This compatibility reduces the need for adapters and streamlines assembly. Designed for dependable workshop use A low unit mass of 0.087 kg makes handling and placement straightforward during rapid set-ups, while the single-item supply model supports targeted stocking strategies for maintenance and production teams. Built under the Vertex range, the component is suitable for integration into existing clamping systems where compact, repeatable fixturing is required. Combined with Metav Werkzeuge’s supply chain from Emmerich, the part contributes to uninterrupted workshop operation by reducing lead times and simplifying ordering. Contact Metav Werkzeuge for tailored advice on the Vertex T-slot (SKU 3434I) and secure reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 3434I GTIN: 4061905093937 Brand: Vertex Weight: 0.087 kg Dimensions (L×W×H): 1-1/8×1-1/4×3/4" Core measurements T-slot size: 11/16" Threads: 1/2-12" and 1/12-13" Eclass: 21029107 Special features Sold individually Type: T-slot item Category: Vertex FAQ Which T-slot size does this component fit? The component is designed for an 11/16" T-slot, making it compatible with many standard milling and drilling table profiles. What thread options are available for attachment? This item features two thread specifications listed as 1/2-12" and 1/12-13", allowing use with common imperial studs and clamping hardware. Is the part suitable for frequent set-ups and repositioning? Yes; the compact form factor and low weight of the component support rapid repositioning and frequent changeovers without adding significant mass to the fixture. Can this be stocked individually for small workshops? The part is supplied sold individually, which supports selective stocking and targeted replacement strategies. Which SKU identifies this item for ordering? Order using SKU 3434I, listed under the Vertex range for straightforward procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11/16" T-Slot Nut Single With 5/8-11 Thread - Vertex
Combining a precise fit for 11/16" T-slots, a secure 5/8-11 thread, and a lightweight 0.087 kg body, the fastener delivers dependable clamping with low handling effort. Take advantage of this compact, accurate solution for repeatable setups; order directly via Metav Werkzeuge or consult their specialists for application advice. T-slot nut 3415I — 11/16" T-slot, 5/8-11 thread (Vertex) A compact T-slot nut designed for secure clamping on machine tables and fixtures, suitable for standard 11/16" T-slots. Robust 5/8-11 thread connection Fits 11/16" T-slots Lightweight 87 g mass Reliable clamping that stabilises setups The T-slot nut 3415I provides a secure mechanical interface between clamping hardware and machine tables. The 5/8-11 thread is a widely used imperial thread form that ensures strong, repeatable engagement with standard clamping bolts. In practice, this means fewer retightening cycles and improved process stability during machining or assembly operations. The component is engineered for precision positioning in the T-slot, reducing lateral play and improving fixturing accuracy for short-run and repetitive tasks. Compact dimensions for flexible handling and fast changeovers With overall dimensions of 1-1/8 x 1-1/4 x 3/4" and a low mass of 0.087 kg (87 g), the form factor minimises interference with adjacent fixtures and reduces inertia during handling. The modest size supports tight workpiece layouts while still providing a robust contact area for clamping forces. The nut’s geometry is optimised for insertion into an 11/16" T-slot, allowing quick placement and repositioning on standard tables; this facilitates efficient setup procedures and shorter machine downtime between jobs. Durable design for consistent performance across cycles Designed as a single unit for general fixturing applications, the fastener offers a straightforward, maintenance-free solution for routine workshop use. The compact fastener supports stable clamping without introducing excess bulk to the work envelope, contributing to repeatable setups and consistent production quality. Where interchangeability and reliable mechanical engagement are required, the component delivers a balance of convenience and functional robustness suitable for a broad range of industrial workshop contexts. Choose the Vertex 3415I for dependable table fixturing and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 3415I GTIN: 4061905093944 Designation: T-slot nut, single unit Core specifications Dimensions: 1-1/8 x 1-1/4 x 3/4" Thread: 5/8-11" T-slot size: 11/16" Weight: 0.087 kg Features Sold individually ECLASS: 21029107 Category: Vertex FAQ Which T-slot size does this nut fit? The fastener fits an 11/16" T-slot; the geometry is intended for standard 11/16" machine table slots. What thread does the nut use? The component features a 5/8-11" thread, a common imperial thread form for clamping hardware. Is the item sold as a single piece? Yes — the product is supplied as a single unit under SKU 3415I. What are the main dimensions and weight? Overall dimensions are 1-1/8 x 1-1/4 x 3/4" and the weight is 0.087 kg (87 g). Who manufactures the component? The fastener is produced by Vertex; the SKU 3415I is part of Vertex’s range of T-slot clamping hardware. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110x110x190mm Mini Chip Collector Handheld, Weighs 0.7 Kg - Vertex
Take advantage of the combination of a compact footprint, handheld operation and clear traceability to keep benches tidy with minimal interruption to production. Order the mini chip collector directly via Metav Werkzeuge or consult our team for advice on integration and stocking. VCC-16 Mini chip collector (handheld) by Vertex — compact 110 × 110 × 190 mm, portable The VCC-16 is a compact, handheld mini chip collector designed for manual removal of swarf and debris in confined workshop areas, ideal for quick spot cleaning and maintenance tasks. Compact 110 × 110 × 190 mm footprint Handheld design for easy spot cleaning Lightweight 0.7 kg for effortless handling Small footprint, big effect for busy benches The compact dimensions of this collector (110 × 110 × 190 mm) make it simple to store on crowded workbenches and to manoeuvre around fixtures. A small physical profile reduces obstruction during machining or inspection tasks and supports a quicker tidying routine, which in turn helps to maintain uninterrupted workflows. The portable form factor is particularly suited to trade shops and maintenance teams that require dependable, space-saving tools for daily operations. Handheld handling that speeds up cleaning cycles Designed as a handheld version, the unit offers fast, targeted removal of chips where vacuums and brushes can't reach without dismantling fixtures. At a listed weight of 0.7 kg, the collector balances stability with manoeuvrability to reduce user fatigue during repetitive clearing tasks. The manual operation enables precise control in sensitive areas, lowering the risk of dislodging fine components while accelerating routine cleaning and reducing machine downtime. Traceability and practical workshop benefits Supply chain and ordering are simplified through clear identifiers: SKU VCC-16 and GTIN 4061905083587 provide traceable procurement and inventory management. The mini collector’s robust, straightforward design supports minimal maintenance and easy replacement when needed, making it a pragmatic choice for both production and maintenance crews. Its handheld nature ensures quick response to swarf accumulation, protecting quality-critical processes and contributing to a tidier, safer working environment. For compact and reliable chip removal, request the Vertex VCC-16 from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for recommendations and stock information Technical Data Article number: VCC-16 GTIN: 4061905083587 Manufacturer: Vertex Facts Dimensions: 110 × 110 × 190 mm Weight: 0.7 kg eClass: 21101790 Special features Handheld version Mini chip collector Suitable for weights up to 0.65 kg FAQ What is the primary purpose of this collector? The VCC-16 mini chip collector is intended for manual removal of swarf and debris in confined workshop areas, enabling quick spot cleaning. Is the unit suitable for frequent use on production benches? Yes, the handheld design and lightweight construction make the VCC-16 suitable for regular spot clearing without significant operator strain. What are the exact dimensions of the device? The collector measures 110 × 110 × 190 mm, providing a compact footprint for crowded benches. How is the VCC-16 identified for ordering? Ordering can be completed using the SKU VCC-16 or GTIN 4061905083587 to ensure accurate procurement. Does the product include information about material or coatings? Material and coating details are not specified in the provided data for the VCC-16, so please consult Metav Werkzeuge for further technical clarification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
12 mm T-Slot Nut Single With M10 Thread - Vertex
Take advantage of a compact, precisely fitted solution that matches 12 mm T-slots and secures with an M10 thread for consistent fixturing. The single-piece design reduces setup variability and supports a smooth production flow; order this T-slot insert directly via Metav Werkzeuge or consult our specialists for application advice. T-slot insert 3423M by Vertex — 12 mm T-slot, M10 thread T-slot insert 3423M is a compact fixing element for machine tables and fixtures, designed to fit 12 mm T-slots and to be secured with an M10 threaded fastening Fits 12 mm T-slots M10 threaded fastening Single-piece construction Compact dimensions 11.7 x 22 x 7 mm Faster, more reliable set-ups through precise fit A precisely dimensioned 12 mm T-slot interface combined with an M10 thread ensures the insert locates and clamps without guesswork, shortening set-up times and reducing rework. The compact footprint (11.7 x 22 x 7 mm) provides a snug engagement in standard T-slots so that alignment is preserved between cycles. For engineering teams pursuing repeatability, the result is consistent part positioning and fewer interruptions in the production chain. Secure clamping that improves process stability The single-piece construction removes joints and mating tolerances that can introduce play, delivering a secure anchorage for fixtures and stop elements. Using an M10 threaded fixing gives dependable clamping force while allowing straightforward replacement or repositioning when fixture layouts change. These attributes translate into measurable operational benefits: reduced downtime during changeovers and improved component tolerances through stable fixturing. Compact design for versatile fixture layouts Small overall dimensions and a low profile make this insert suitable for dense fixture arrangements and retrofits on existing machine tables. The compact form allows tighter packing of clamping points without sacrificing stability, enabling designers to create more flexible and space-efficient fixturing solutions. Sourcing from an established brand contributes to consistent part-to-part quality and predictable behaviour in daily shop-floor use. Contact Metav Werkzeuge for tailored advice on Vertex T-slot inserts and to secure supply from our Emmerich quality hub Technical data SKU: 3423M GTIN: 4061905086793 ECLASS: 21029107 Core specifications Dimensions: 11.7 x 22 x 7 mm T-slot compatibility: 12 mm Thread: M10 Design & special features Single-piece design Intended for T-slot fixturing Brand: Vertex FAQ Which T-slot size does the insert suit? The insert is specified for 12 mm T-slots; the 3423M by Vertex matches standard 12 mm slot systems. What mounting thread is used for fastening? Mounting is via an M10 thread, providing a secure and widely compatible fastening option for fixtures. Is the material of the insert stated? Material is not specified in the provided product data for the 3423M T-slot insert; consult Vertex documentation for material and mechanical properties. Can the insert be used for dense fixture arrangements? Yes, the compact dimensions (11.7 x 22 x 7 mm) and low profile make the insert suitable for tight fixture layouts and retrofits. How does the single-piece construction benefit fixturing? Single-piece construction reduces tolerance stack-up and potential play, yielding more stable clamping and better repeatability in production setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
126mm Movable Assembly Aid, DIN 69871A - Vertex
Take advantage of a movable assembly aid that combines space-saving design, compatibility with BT30 tapers and straightforward handling to keep tool-change routines efficient. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. VTL-BT30 Assembly aid — movable, DIN 69871A compatible (Vertex) The VTL-BT30 is a movable assembly aid designed for safe, compact handling of BT30 taper toolholders and compliant with DIN 69871A standards for workshop and production environments. Movable design for flexible positioning Compatible with DIN 69871A tapers Compact footprint 116 x 91 mm Lightweight at 4.2 kg for easy handling Optimised handling to speed up tool-change workflows The movable design and compact footprint provide tangible efficiency gains in cluttered workspaces. By placing the assembly aid close to the machine spindle, downtime during tool change is reduced and handling becomes more reliable. The small 116 x 91 mm base minimises bench space requirements while the 4.2 kg mass balances stability with manoeuvrability. For operations that prioritise throughput and repeatability, this fixture supports quicker set-up without adding complexity. Compatibility and conformity that simplify process planning Built to match the dimensions of BT30 tapers, conformity with DIN 69871A ensures predictable fitment with standard toolholders and spindles. This predictable interface reduces the need for bespoke adapters and simplifies inventory management. The unit’s classification under standard industry codes aids procurement and machine-setup documentation, contributing to a smoother integration into established workflows and quality systems. Robust, practical design that supports daily use A movable mounting solution provides a blend of robustness and user-friendly ergonomics: the compact base allows stable placement while the construction supports repeated handling in production environments. The device serves as a reliable support during assembly tasks, reducing the risk of accidental damage to precision tapers. The straightforward design also means limited maintenance and uncomplicated training for shop-floor personnel, making it suitable for both skilled technicians and general workshop teams. Contact Metav Werkzeuge in Emmerich for personalised advice on the Vertex VTL-BT30 assembly aid; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VTL-BT30 GTIN: 4061905084522 Brand: Vertex Core specifications Footprint: 116 x 91 mm Height: 126 mm Weight: 4.2 kg Special features Movable assembly aid For BT30 taper (DIN 69871A) Classification: eCl@ss 21029203 FAQ What is the primary purpose of this assembly aid? The assembly aid is designed to support safe handling and temporary holding of BT30 taper toolholders during installation and removal from the spindle. Is the VTL-BT30 compatible with all BT30 toolholders? Compatibility is ensured with toolholders conforming to the BT30 interface standard; the unit is built to match DIN 69871A dimensions for reliable positioning. How much bench space does the unit require? The compact base measures 116 x 91 mm, allowing close placement to the machine without occupying significant workbench area. Can the device be moved between stations easily? Yes, the movable design and moderate mass of 4.2 kg permit straightforward relocation between workstations while maintaining stability during use. Which manufacturer produced this assembly aid? The assembly aid is supplied by Vertex and identified as SKU VTL-BT30 for procurement and documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
136mm Assembly Aid Movable, DIN 69871A - Vertex
Take advantage of a compact, compliant mounting solution that streamlines tool handling while keeping the workshop workflow efficient; the movable design and DIN 69871A compatibility ensure quick, repeatable set-up. Order the unit directly via Metav Werkzeuge or ask our consultants for application advice. Assembly Aid VTL-BT40 — Movable BT40 mounting, DIN 69871A A Assembly Aid VTL-BT40 engineered for safe, flexible positioning of BT40 toolholders and designed to match the DIN 69871A spindle interface for reliable workshop integration DIN 69871A compatibility for spindle mounting Movable design for flexible positioning Compact base 117x91 mm for small footprints Robust weight 4.3 kg for stable handling Faster set-up, fewer interruptions The VTL-BT40 delivers measurable time savings during tool change and set-up sequences by offering a purpose-built mounting surface that matches the BT40 taper. Compatibility with DIN 69871A means the unit aligns with common spindle standards, reducing the need for adapters and ensuring that toolholders seat accurately. This reduces rework caused by misalignment and shortens machine downtime, which translates into improved line efficiency and predictable cycle planning. The design supports efficient workflows without adding complexity to existing processes. Stable handling in a compact footprint With a base of 117 x 91 mm and a height of 136 mm, the device occupies minimal bench space while providing a stable platform for assembly tasks. The 4.3 kg mass gives the fixture inherent stability, limiting vibration during handling and placement of toolholders. For workshops where bench space is at a premium, this compact footprint allows closer organisation of tools and accessories, improving ergonomics and contributing to a tidier, safer working environment. The movable configuration permits quick repositioning without compromising steadiness. Built for routine workshop reliability Constructed to serve as a practical aid for repetitive mounting operations, this product supports consistent, repeatable handling of tapered tooling. The movable character of the fixture assists technicians when aligning and loading holders into machines, streamlining set-up steps that otherwise consume skilled time. Where traceability and conformity to standards matter, the adherence to DIN 69871A provides assurance that the assembly procedure meets established machine-interface norms. The result is a dependable accessory that integrates smoothly into day-to-day production. Contact Metav Werkzeuge for tailored advice on integrating this Vertex BT40 mounting aid into existing processes — Metav Werkzeuge combines decades of precision expertise with a comprehensive product range to simplify procurement and ensure the right fit for every workshop. Technical data SKU: VTL-BT40 GTIN: 4061905090578 Brand: Vertex Facts Height: 136 mm Base dimensions: 117 x 91 mm Weight: 4.3 kg eClass: 21029203 Special features Movable configuration BT40 taper interface Compliance with DIN 69871A FAQ Is the mounting aid compatible with all BT40 toolholders? Yes. The Assembly Aid VTL-BT40 is designed for BT40 taper toolholders and matches the DIN 69871A interface to ensure correct seating of compatible holders. What are the physical dimensions and weight for bench planning? The unit measures 136 mm in height with a base of 117 x 91 mm and weighs 4.3 kg, making the VTL-BT40 compact yet stable for bench use. Does the product conform to recognised spindle standards? Compliance with DIN 69871A is specified for the VTL-BT40, providing compatibility with standard BT40 spindle interfaces. Can the movable design withstand regular workshop handling? The movable configuration of the VTL-BT40 is intended for routine repositioning and assembly tasks; its mass and base size support stable handling during normal use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
14mm T-Slot Nut Single M12 Thread - Vertex
Reliable clamping for standard 14 mm T-slots and a secure M12 threaded connection ensure stable fixture assembly; compact dimensions allow space-saving installation. Order the 3414M T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. 3414M T-slot nut by Vertex — M12 thread for 14 mm T-slots The 3414M T-slot nut is a compact fastening component designed for use in 14 mm T-slots on machine tables and modular fixturing systems. M12 thread for secure fastening Fits 14 mm T-slot Compact dimensions 13.7 x 28 x 8 mm Supplied individually (single piece) Precision fastening for standard machine tables The 3414M T-slot nut combines a standard M12 thread with a profile tailored to a 14 mm T-slot, delivering reliable clamping where repeatable positioning is required. The geometry of the insert guarantees a firm seating in the slot, reducing micro‑movement during machining operations; this translates into consistent part quality and fewer setup checks. The compact footprint also helps when multiple fixtures share limited table space, so a neat, resilient assembly can be achieved without redesigning fixturing layouts. Compatibility with common machine tables makes it a straightforward choice for retrofit and new installations. Easy integration and reliable clamping under load Designed for direct insertion into the slot, the fastening component offers a low‑profile solution that supports controlled torque transmission via the M12 interface. The stated outer dimensions of 13.7 x 28 x 8 mm enable predictable clearance planning and straightforward CAD modelling of the fixture. Where precise clamping forces are required, the nut’s form factor ensures centred load transfer and stable seating, which helps to avoid chatter and maintain surface finish. For production environments, this means fewer interruptions and a smoother machining cycle, improving overall throughput and workplace efficiency. Quality and consistency that support workshop workflows Manufactured by a recognised brand and supplied individually, the item is intended for users who prioritise precision and dependable repeatability in their fixturing. The combination of standardised sizing and a robust threaded connection reduces the need for custom fasteners, simplifying inventory management and procurement. Choosing standard components also supports leaner tooling strategies and faster changeovers. For operations seeking traceable parts and consistent results, this clamping insert contributes to a more reliable process chain and reduced setup variability. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex 3414M T-slot nut — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: 3414M GTIN: 4061905087769 Brand: Vertex Facts T-slot width: 14 mm Thread: M12 Dimensions: 13.7 x 28 x 8 mm Special features Supplied individually Low-profile design for space-saving fixtures Intended for machine table and modular fixturing FAQ What T-slot width does the nut fit? The nut is designed for a 14 mm T-slot and provides a form-fit connection suitable for standard machine table profiles. Which thread size is used for the fastening? A standard M12 thread is provided for secure attachment and compatibility with common clamping hardware. Can this component be used for retrofitting existing fixtures? Yes, the compact dimensions and standard thread make it suitable for retrofit applications where a 14 mm T-slot and M12 fasteners are already in use. Is the material specified for the nut? Material information is not provided in the product data; please contact Metav Werkzeuge for material and surface treatment details. What is the SKU for ordering and reference? Order reference: 3414M; use this SKU when enquiring about availability and delivery options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16 mm T-Slot Clamp Single M14 Thread - Vertex
Taking advantage of the M14 threaded connection and precise fit for a 16 mm T-slot results in a secure, space-efficient clamping solution. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice. T-Nute B3424M — T-slot nut with M14 thread, fits 16 mm slot (Vertex) T-Nute B3424M is a compact clamping insert designed for secure fastening in 16 mm T-slots on machine tables and fixtures T-slot compatibility 16 mm M14 threaded connection Compact 15.7 x 28 x 8 mm Supplied individually, ready for assembly Secure clamping that reduces setup time A well-matched clamping element reduces downtime and improves throughput on production equipment. The T-slot nut concept ensures repeatable positioning and secure load transfer when paired with an appropriate clamping bolt, while the M14 thread provides a standard interface for common clamping hardware. With a defined fit for a 16 mm T-slot, the component guarantees consistent engagement and minimises lateral play, which supports faster cycle starts and fewer rechecks during batch production. This technical reliability directly contributes to measurable efficiency gains in machining and fixturing contexts. Compact form for dense tooling arrangements Small footprint components enable denser tooling layouts without compromising stability. At 15.7 x 28 x 8 mm, the insert presents a low-profile solution that leaves more usable table area for clamps, stops and workpieces. The reduced projection is especially valuable in setups where multiple clamps share a single T-slot or when tooling must be closely spaced for short-run, mixed-batch production. By selecting a compact T-slot nut, engineers benefit from increased flexibility in fixture design and improved access for tightening tools, helping to streamline both manual and automated clamping operations. Reliable identification and supply for industrial workflows Traceable identification simplifies procurement and inventory management. The part is listed under SKU B3424M and carries GTIN 4061905088780, facilitating clear stock control and reordering. Sourced from Vertex, this insert is supplied individually, which allows ordering to match exact assembly needs and reduces surplus inventory. Metav Werkzeuge’s supply chain in Emmerich acts as a quality filter for the European market, combining broad availability with consistent delivery, so projects proceed without avoidable delays. Contact Metav Werkzeuge for specific compatibility checks or to arrange a tailored supply of Vertex components direct from our Emmerich warehouse Technical data Article number: B3424M GTIN: 4061905088780 Brand: Vertex ECLASS: 21029107 Facts T-slot width: 16 mm Thread: M14 Dimensions: 15.7 x 28 x 8 mm Special features Type: T-slot nut Supplied individually SKU: B3424M FAQ Which T-slot size does this nut fit? The T-Nute fits a 16 mm T-slot and is specified for use where that slot width is present. What thread size is provided? The component uses an M14 thread; Vertex lists this as the standard threaded interface for the B3424M. What are the external dimensions? Dimensions are 15.7 x 28 x 8 mm (L x W x H). Is the part supplied as a single item? Yes, the Vertex T-Nute B3424M is supplied individually. How is the product identified for ordering and stock? Identification: SKU B3424M, GTIN 4061905088780, ECLASS 21029107 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16 mm T-Slot Nut Single With M12 Thread, 15.7x28x8mm - Vertex
Take advantage of reliable, compact clamping for standard 16 mm T-slots and the M12 threaded interface to secure fixtures with consistent repeatability. The combination of precise dimensions and single-piece delivery supports fast set-up and low maintenance. Order the A3424M T-slot nut directly via Metav Werkzeuge or consult our specialists for integration advice. A3424M T-slot nut – M12 thread for 16 mm T-slots (Vertex) The A3424M T-slot nut is a compact clamping element designed for use in 16 mm T-slots, providing a secure threaded interface for fixtures and accessories. M12 threaded connection Compatible with 16 mm T-slots Compact 15.7×28×8 mm form Single-piece precision delivery Faster, more secure clamping for standard T-slots Fitting directly into a 16 mm T-slot, this component provides a robust M12 thread that simplifies the attachment of clamps and modular fixturing. The small footprint and precise outer profile reduce play in the slot, which translates into less setup time and improved repeatability on machine tables. By converting a slot into a reliable threaded anchor, the element supports efficient workholding strategies and reduces secondary operations. Consistent results through precise manufacturing Manufactured as a single-piece component to tight tolerances, the element delivers consistent mechanical behaviour across repeated uses. The compact size and exact dimensions ensure predictable contact conditions and force distribution when tightened into place. This engineering approach minimises variability between setups, improving process stability and supporting higher throughput in production environments that demand repeatable clamping solutions. Simple integration into modular fixtures and tooling The combination of a standard M12 thread and compatibility with common slot widths enables straightforward integration into existing fixturing systems. Installation requires no special adapters: the nut seats into the slot and accepts standard fasteners, allowing rapid retrofitting or reconfiguration of assemblies. The design supports a modular workflow, helping maintain machine uptime while offering a practical route to upgrade clamping performance without extensive redesign. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex A3424M T-slot nut into existing fixturing setups and to discuss compatibility with specific machine tables or fixtures. Technical data Article number: A3424M Name: T-slot nut GTIN: 4061905088322 Manufacturer: Vertex Facts Dimensions: 15.7 x 28 x 8 mm T-slot compatibility: 16 mm Thread: M12 Special features Single item delivery Compact form factor Threaded interface for standard fasteners FAQ What T-slot size is this nut for? The A3424M T-slot nut is designed for a 16 mm T-slot and seats securely to provide a threaded fixing point. Which thread does the nut accept? This Vertex T-slot nut features an M12 thread, compatible with standard M12 bolts and fittings. Is the item supplied individually or in sets? The product is supplied as a single item, delivered individually for flexible purchase quantities. Can this nut be used for modular fixturing on machine tables? Yes, the component is intended as a clamping element for machine tables and modular fixturing systems where a 16 mm T-slot and an M12 threaded connection are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm T-Slot Nut Single M16 Thread, For 17.7x32x11mm Slot - Vertex
Take advantage of the combination of M16 thread, compatibility with 18 mm T-slots, and compact 17.7 x 32 x 11 mm dimensions for reliable fixture retention; order the fastening element directly via Metav Werkzeuge or consult the technical advisors for assistance. 3415M T-slot nut — M16 thread, for 18 mm T-slots (Vertex) A 3415M T-slot nut designed for clamping and fixturing tasks on machine tables with an 18 mm T-slot, supplied as a single-piece fastening element. M16 thread for standard clamping bolts Fits 18 mm T-slots on machine tables Single-piece design for straightforward installation Compact 17.7 x 32 x 11 mm dimensions Secure clamping where precision matters The M16 threaded profile and compatibility with 18 mm table slots make this fastening component a practical choice for workshop fixturing. Engineered to sit flush within the slot, the element ensures a stable contact point for clamping bolts and fixtures, reducing lateral movement during machining operations. Clear numerical specification of the dimensions supports precise planning of clamp layouts and toolpaths, while the standard thread size allows use with commonly available clamping hardware. Fast, repeatable set-up with a compact design A single-piece construction keeps installation steps to a minimum and simplifies inventory management. The compact 17.7 x 32 x 11 mm footprint permits close spacing of clamping points and contributes to efficient use of table real estate. Reduced assembly complexity shortens set-up times and supports higher throughput, which is a direct operational advantage for production environments where time and reproducibility are critical. Practical fit for clamping technology and fixtures This fastening element is tailored for machine tables and modular fixturing, enabling precise positioning of workpieces or accessories. The combination of standard M16 thread and slot compatibility facilitates integration into existing clamping systems without the need for custom adapters. Clear labelling and identification help maintain order in stores and on the shop floor, assisting procurement and maintenance teams to source the correct part rapidly. Contact Metav Werkzeuge to discuss the Vertex 3415M T-slot nut and secure the right components for reliable clamping from our Emmerich warehouse. Technical Data Article number: 3415M GTIN: 4061905089596 Designation: T-slot nut Version: single Facts Dimensions: 17.7 x 32 x 11 mm Thread: M16 T-slot width: 18 mm ECLASS: 21029107 Special features Single-piece fastening element Compatible with standard clamping bolts Compact format for tight fixture spacing FAQ What thread size does this T-slot nut use? The Vertex 3415M T-slot nut is supplied with an M16 thread suitable for standard clamping bolts and fittings. Which T-slot width is the nut designed for? This fastening element is designed to fit an 18 mm T-slot on machine tables and modular fixturing systems. Is the part supplied individually or in sets? The item is listed as a single version; the Vertex 3415M is supplied as an individual T-slot nut. What are the exact external dimensions of the nut? Dimensions are 17.7 x 32 x 11 mm, which supports compact clamping arrangements and accurate layout planning. How can this component be identified for ordering or inventory? Use the article number 3415M or GTIN 4061905089596 when ordering the Vertex T-slot nut to ensure correct procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical SK-50x1 / SK-40x1 Adapter Holder, 238x305mm Foot - Vertex
Benefit from a stable, compact mounting solution that pairs a 238 x 305 mm base with a dedicated SK‑50 spindle interface, delivering reliable stability during horizontal and vertical set-ups; the 187 mm working height and 25 kg mass provide a secure platform for precision tasks. Order the VTD-7 assembly aid directly via Metav Werkzeuge or ask our consultants if needed. VTD-7 assembly aid — SK‑50 compatibility with SK‑40 adapter holder, robust 238 x 305 mm base The VTD-7 assembly aid is a compact mounting device for horizontal and vertical set-ups, designed to accept SK‑50 spindles and accommodate SK‑40 via an adapter holder Compatible with SK‑50 and SK‑40 adapter Stable 238 x 305 mm mounting base Vertical and horizontal operation possible Compact 187 mm working height Secure mounting for repeatable accuracy A solid footprint is the foundation of repeatable results. The prominent 238 x 305 mm base and overall mass of 25 kg create a low centre of gravity, reducing vibration and movement during assembly operations. This stability supports precision alignment tasks and helps to maintain concentricity when mounting spindles or tooling. For workshops that demand consistent outcomes, the robust support reduces rework and inspection time, improving throughput without complex fixtures. Versatile taper support that speeds changeovers Built around the standard SK‑50 interface, the device includes a taper configuration listed as SK‑50x1 and an SK‑40x1 adapter holder, enabling flexible use of tooling and spindles. The taper solution simplifies mechanical transitions between different machine tapers and shortens set-up procedures. By standardising on these common spindle tapers, the assembly device streamlines workplace organisation and reduces the number of bespoke adaptors required, which supports faster machine availability and lower changeover costs. Orientation options that suit workshop workflows Designed for both horizontal and vertical operation, the unit adapts to varying assembly needs—whether checking runout on a spindle, completing end-face operations, or performing bench-based alignment. The compact 187 mm height makes it suitable for workbenches and granite tables where space is at a premium, while the proven geometry ensures the mounted tool remains clamped and accessible. This flexibility supports efficient sequencing of tasks and allows the same device to be used across multiple stations in the shop. Simple integration and clear specifications The device uses established taper standards and clear, measurable dimensions to aid specification and purchasing choices. The SK‑50 acceptance and the provision for an SK‑40 adapter are industry-standard terms; for users less familiar with tapers, the SK designation denotes the spindle taper family and the numeric suffix identifies the standard size. The compact footprint and defined height make planning for fixturing straightforward and reduce uncertainty during machine set-up. Supplied through Metav Werkzeuge, the unit is backed by a quality-aware supply chain that serves European workshops with consistent availability and documentation. Contact Metav Werkzeuge in Emmerich for tailored advice, stock information or to discuss suitable adapters and delivery options — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Data SKU: VTD-7 GTIN: 4061905096266 ECLASS: 21029203 Name: Assembly aid (Montagehilfe) Core data Height: 187 mm Base: 238 x 305 mm Weight: 25 kg Special features Mounting acceptance: SK‑50 Taper: SK‑50x1 and SK‑40x1 (adapter holder) Orientation: horizontal and vertical FAQ Which spindle tapers fit the assembly aid? The VTD-7 accepts the SK‑50 taper and includes an SK‑40x1 adapter holder to accommodate SK‑40 tooling where required. Can the device be used vertically and horizontally? Yes. The unit is specified for both horizontal and vertical operation to match different workflow requirements. What are the physical dimensions and weight? The mounting base measures 238 x 305 mm, the working height is 187 mm, and the mass is 25 kg, which together provide a stable support platform. Is the material of the unit specified? The product data does not specify the construction material for the assembly aid; please contact Metav Werkzeuge for material details if required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical SK-50x2 Adapter Holder, 238x305mm Base - Vertex
The compact design, built for both horizontal and vertical set-ups, combines stable support with straightforward compatibility via an SK-50 taper, making it a practical choice for precise mounting tasks; order directly through Metav Werkzeuge or consult our experts for tailored advice. VTD-6 Mounting Aid — SK-50 taper, horizontal & vertical application (Vertex) The VTD-6 mounting aid for SK-50 spindles, designed to support horizontal and vertical assembly and machining tasks in workshop and production environments. SK-50 taper compatibility for direct mounting Stable 238 x 305 mm base for secure support Adapter holder SK-50x2 for flexible use Robust construction with 24 kg mass for vibration damping Faster, more reliable set-ups through taper compatibility The presence of a SK-50 taper and an adapter holder SK-50x2 enables quick, repeatable mounting directly into compatible spindles and fixtures. This reduces changeover time and improves process throughput by removing the need for complex intermediary fixtures. The taper interface is a widely accepted machine standard, ensuring broad machine compatibility and straightforward integration into existing tool change procedures. As a result, set-up routines become more predictable and measurable, supporting improved workflow planning. Secure support and vibration damping for accurate results A solid base (238 x 305 mm) combined with a mass of 24 kg provides inherent stability during assembly or light machining operations. The substantial weight contributes to vibration damping, helping to preserve positional accuracy while work is carried out in both horizontal and vertical orientations. For operations that demand consistent alignment, this stability translates into fewer rework cycles and more consistent end results, improving overall production efficiency and part quality. Versatile orientation and compact footprint for workshop use Designed for both horizontal and vertical use, the device accommodates a range of mounting scenarios without requiring a large footprint. With a vertical height of 187 mm, the aid fits into crowded machine bays and can be integrated into modular workstations. The combination of compact dimensions and flexible orientation supports quicker fixturing decisions and allows workshops to optimise floor space while maintaining the capability to address diverse assembly tasks. The product code VTD-6 denotes the model variant suited to standard SK-50 tooling systems. For SK-50 compatibility and dependable mounting performance, contact Metav Werkzeuge to discuss the VTD-6 and arrange supply or technical consultation from our Emmerich facility Technical data SKU: VTD-6 GTIN: 4061905096259 Manufacturer: Vertex Facts Weight: 24 kg Height: 187 mm Base footprint: 238 x 305 mm Eclass: 21029203 Special features Spindle taper: SK-50 Adapter holder: SK-50x2 Orientation: horizontal and vertical Intended application: mounting/assembly aid FAQ What machines is this mounting aid compatible with? The mounting aid is compatible with machines and fixtures that accept an SK-50 taper; the VTD-6 is intended for integration with standard SK-50 toolholding systems. Can the device be used both horizontally and vertically? Yes, the VTD-6 supports both horizontal and vertical orientations for flexible assembly and light machining set-ups. How does the weight affect performance? At 24 kg, the mass increases stability and contributes to vibration damping, which helps maintain positional accuracy during operations. Is an adapter included for different spindle interfaces? The unit features an adapter holder SK-50x2, which facilitates compatibility with related toolholders and simplifies transitions. What are the footprint and height dimensions for workshop planning? The base measures 238 x 305 mm and the vertical height is 187 mm, enabling integration into compact workstations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical, BT-#40x2 Adapter Holder - Vertex
Benefit from the combination of BT-40 compatibility and a compact, stable base to speed up assembly tasks in both horizontal and vertical setups; the robust footprint and precise taper interface support reliable machine integration. Order the assembly aid directly via Metav Werkzeuge or ask our consultants if needed. VTD-1 Assembly Aid by Vertex — BT-40 Compatibility, Horizontal & Vertical Mounting The VTD-1 is an assembly aid for horizontal and vertical mounting, designed to integrate with BT-40 tooling and to support precise positioning tasks in workshop and machine-tool environments. BT-40 compatibility for fast integration Supports horizontal and vertical mounting Stable base 238 x 305 mm footprint Solid construction, weight 22.4 kg Faster set-ups through dual-orientation support The assembly aid enables both horizontal and vertical operation, reducing the need for multiple fixtures and shortening changeover times in mixed production runs. By allowing orientation changes without replacing the support, the unit simplifies workflow sequencing and minimises handling steps, which benefits production environments that require frequent repositioning or staged assembly. The design focuses on operational efficiency and repeatability rather than decorative aspects. Compact footprint with robust stability for secure positioning A stable base of 238 x 305 mm and a nominal height of 187 mm deliver a compact but sturdy platform that fits bench space or machine tables where space is at a premium. The overall weight of 22.4 kg contributes to low susceptibility to movement during alignment tasks, providing a dependable support for positioning operations. Clear dimensional data helps planners assess integration without ambiguity and supports ergonomic placement on shop floors. Seamless integration with BT-40 spindles and adapter holder The taper interface is configured for BT-40 tooling and includes an adapter holder arrangement for straightforward connection to compatible toolholders. This standard interface ensures the unit aligns with common spindle and holder systems, enabling straightforward transfer of tools and fixtures between machines and the aid. The mechanical simplicity of the taper connection supports repeatable seating and rapid reconfiguration, which is advantageous for shops seeking consistent alignment and reduced set-up times. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex BT-40 assembly aids and to arrange procurement or technical consultation Technical Data Article number: VTD-1 GTIN: 4061905084904 ECLASS: 21029203 Facts Height: 187 mm Foot: 238 x 305 mm Weight: 22.4 kg Taper: BT-40x2 (adapter holder) Special features Horizontal and vertical mounting BT-40 compatibility Assembly aid Manufacturer: Vertex FAQ Is the unit suitable for both horizontal and vertical assembly tasks? Yes. The VTD-1 is designed for both horizontal and vertical use, allowing flexible orientation without the need for multiple fixtures. Which taper standard does the assembly aid use? The assembly aid uses a BT-40 interface with an adapter holder, making it compatible with standard BT-40 toolholders. What are the main dimensions and weight of the device? The VTD-1 has a foot of 238 x 305 mm, a height of 187 mm and a weight of 22.4 kg. Can the device be integrated with CNC machines that use BT-40 tooling? Yes. The VTD-1’s BT-40 taper and adapter holder permit integration with machines and tooling systems that conform to the BT-40 standard. What is the SKU and GTIN for ordering and inventory purposes? SKU VTD-1, GTIN 4061905084904 are provided for procurement and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure positioning and faster assembly for accurate production
Clamping and assembly aids are essential tools in industrial fixture construction, welding and both manual and automated assembly. Also referred to as clamping aids, assembly fixtures or positioning aids, this product group temporarily fixes individual parts or complex assemblies in a form-stable, non-slip and precisely positioned manner before final joining operations such as bolting, riveting, welding or bonding.
How they work where precision matters
These aids use a mix of simple mechanics and modular design to guarantee repeatable results in demanding shop situations. Typical elements such as modular clamping angles, positioning pins, quick clamps, spring-loaded pressure pieces and magnetic fixing aids ensure that required dimensional and positional tolerances are met reliably, even during high-throughput production. The ergonomic design of many fixtures frees both hands of the operator, enabling safer, faster joining and reducing the need for manual support.
Immediate benefits for production efficiency
- reproducible positioning and adherence to tight dimensional tolerances
- reduced set-up and non-productive time, faster changeovers
- lower scrap rates through secure, vibration-resistant fixation
- improved ergonomics, operator both hands free for joining tasks
- suitable for manual and automated processes, easy integration into existing workflows
Technical data at a glance
- primary applications: fixture construction, welding, manual and automated assembly
- typical components: modular clamping angles, positioning pins, quick clamps, spring-loaded pressure pieces, magnetic fixing aids
- main function: temporary, form-stable fixation of parts and assemblies
- process benefits: reproducible tolerance control; reduced rework and scrap
- operator benefit: ergonomic hands-free positioning
Why Metav is the pragmatic partner for your workshop
Metav combines decades of expertise with a broad range of products to make high-precision solutions accessible for every workshop. With more than 48,000 customers, a catalogue exceeding 250,000 items and a quality filter based in Emmerich, Metav is positioned as a dependable supplier for industrial buyers seeking reliable clamping aids and assembly fixtures rather than a one-off bargain. The Emmerich location ensures consistent supply and straightforward order handling to your workbench.
In short: clamping and assembly aids provide the reliable, repeatable fixation that underpins efficient, high-quality assembly and welding processes.
FAQ
What is the main difference between clamping aids and assembly fixtures?
Clamping aids are general-purpose positioning tools for temporary fixation; assembly fixtures are often more dedicated solutions designed for specific parts or repeat operations within the clamping and assembly aids category.
Which joining processes are clamping and assembly aids suitable for?
Clamping and assembly aids are suitable for bolting, riveting, welding and adhesive bonding in both manual and automated production environments.
How do these aids affect operator ergonomics and safety?
By securing heavy or awkward parts, clamping aids free both hands of the operator, reduce awkward handling and minimise the risk of slips or misalignment during joining.
Can these tools be integrated into automated lines?
Yes. Many assembly fixtures and positioning aids are designed for quick, repeatable set-up and are compatible with automation and robotic cells.
Why choose Metav for clamping and assembly aids?
Metav offers a wide, quality-assured range of clamping aids and assembly fixtures, combined with proven supply reliability from Emmerich and decades of technical expertise for industrial procurement.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com