M12 Height Adjustment Screw With Nut For Changeable Holder, D1 - TECWERK
Take advantage of the combination of straightforward compatibility, standard M12 thread design and the included securing nut for efficient maintenance and minimal downtime. Order this spare part directly via Metav Werkzeuge or consult the team for application advice. Height-adjusting screw D1 M12 with nut – compatible spare part for TECWERK interchangeable holders The Height-adjusting screw D1 M12 with nut serves as a direct replacement component for TECWERK interchangeable-holder systems, enabling fine vertical adjustment and secure fastening within modular clamping setups. M12 thread for standardised mounting Nut included for secure fixation Compatible with TECWERK interchangeable holders Precise, standardised adjustment for modular setups The component provides a metric M12 thread, which ensures compatibility with widely used clamping interfaces and simplifies procurement and stocking. The standard thread size allows straightforward replacement of worn or damaged height adjusters without modification to the holder assembly. By using a standardised fixing, mechanical tolerances are preserved and readjustment is minimised, supporting continuous production flow with predictable results. Secure fastening reduces rework and setup time Delivered as a set that includes the nut, the item is intended to restore clamping reliability quickly after wear or during scheduled maintenance. The included fastening element guarantees that axial play can be eliminated without sourcing additional parts, shortening maintenance cycles and reducing the risk of improper assembly. Where repeatability and secure contact are required, this solution reinstates the intended clamping geometry efficiently. Designed for straightforward spare-part management As a dedicated replacement piece for TECWERK interchangeable-holder variants, this adjuster simplifies inventory management and spare-part logistics. Keeping compatible adjusters in stock reduces downtime associated with waiting for bespoke parts and supports predictable maintenance schedules. The straightforward specification also aids purchasing decisions, as the essential technical attribute — the M12 thread — is clearly defined and easy to cross-reference with existing assemblies. Clear compatibility and application note Specified as a spare part for all TECWERK interchangeable-holder versions, the product restores vertical adjustment capability and secure fixing in modular clamping systems. The set content explicitly lists the included nut, ensuring completeness at delivery. For designers and workshop managers, the item is a practical choice when matching components across a family of holders is required and when maintaining a consistent clamping standard is a priority. Contact Metav Werkzeuge for compatibility checks or to request the spare part for TECWERK systems and secure fast replacement with minimal interruption to workshop operations Technical data Article number: 2000832425NW SKU: 2000832425NW Manufacturer: TECWERK Product: Height-adjusting screw D1 Thread: M12 Set content: includes nut UID: 2000832425NW Facts Thread size: M12 Type designation: D1 Packaging unit: 1 Compatible with: TECWERK interchangeable-holder versions Special features Spare part for all TECWERK interchangeable holders Includes nut for immediate installation Standard metric thread for easy replacement Restores vertical adjustment and secure clamping Suited for routine maintenance and quick repairs FAQ Is this adjuster compatible with all TECWERK interchangeable holders? Yes. The height-adjusting screw D1 M12 with nut is specified as a spare part for all TECWERK interchangeable-holder versions and is intended to match the original interface. What thread size does the component use? The component uses a standard metric M12 thread, which facilitates replacement within common clamping systems. Does the delivery include the fastening nut? Yes. The set content includes the nut, so the component is ready for immediate installation without sourcing additional parts. Can this screw be used to restore clamping precision after wear? The adjuster is designed to reinstate vertical adjustment and secure fixing in modular holders, helping to recover the intended clamping geometry and repeatability. What is the article number for ordering? The article number is 2000832425NW; this identifier can be used when ordering the spare part for TECWERK systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M4 Height-Adjustable Screw With Nut For Interchangeable Holder, Replacement Part - TECWERK
Take advantage of a compact replacement solution that combines secure vertical adjustment, simple installation and full compatibility with TECWERK quick-change holders. The M4 thread and included nut ensure reliable locking and repeatable positioning; order the part directly via Metav Werkzeuge or consult the specialists for fit guidance. Height-adjusting screw AA, M4 thread with nut – TECWERK spare part A height-adjusting screw designed as a replacement component for TECWERK quick-change holders, providing fine vertical adjustment in tool-holder systems. M4 thread for secure adjustment Compatible with all TECWERK change holders Supplied complete with locking nut Precise vertical adjustment for repeatable set-ups A compact height-adjusting screw with M4 thread and AA designation offers a straightforward mechanical method to set and lock tool or workpiece elevation. The metric M4 size denotes a 4 mm standard ISO thread, which delivers a predictable pitch and reliable clamping force when paired with the supplied nut. This results in repeatability during reassembly and minimises measurement variance in successive operations, a key benefit for production runs that demand consistent results rather than one-off accuracy checks. Rapid replacement to reduce machine downtime Designed as a direct spare, the component serves as a spare part for TECWERK quick-change holder systems, enabling swift field replacement without complex rework. Its simple geometry and the included fastening element allow maintenance teams to restore full function in minutes, which supports reduced setup time and lower production interruptions. Clear mechanical engagement and standardised thread form keep intervention uncomplicated and repeatable across different holder versions. Straightforward function, tangible workshop advantages The part’s strength lies in its uncomplicated design: thread, body and fastening element together provide a robust interface for height control without electronics or calibration routines. For workshops that favour mechanical reliability over electronic adjustment, this solution offers predictable behaviour, low susceptibility to contamination and minimal training requirements. The use of a standard M4 thread means replacement parts and compatible tools are widely available, supporting long-term operability. Stock reliability and system compatibility assurance As an authorised spare for TECWERK change holders, availability through established distributors ensures consistent supply and compatibility verification. Metav’s role as a centralised supplier and quality filter for the European market reduces procurement complexity and supports seamless replenishment for small workshops and industrial users alike. The combination of standardised connection, included nut and documented compatibility simplifies inventory management and supports efficient workshop planning. For fast, compatible replacement parts for TECWERK quick-change holders contact Metav Werkzeuge in Emmerich to confirm availability and suitability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 2000832421NW Type designation: AA Thread: M4 Manufacturer: TECWERK Product type: Height-adjusting screw Packaging unit: 1 Includes: Nut Facts Thread size: M4 Size designation: AA Packaging unit: 1 Special features Replacement for all TECWERK quick-change holder versions Supplied with nut Spare part for change holder systems FAQ What applications is this height-adjusting screw suitable for? The height-adjusting screw is intended as a replacement component for TECWERK quick-change holders and is suitable wherever fine vertical adjustment and locking are required within those holder systems. Does the part include the fastening element needed for installation? Yes, the delivery includes the locking nut, so the part is supplied ready for installation on compatible TECWERK quick-change holders (SKU 2000832421NW). How does the M4 thread affect compatibility and strength? The M4 thread is a standard metric thread form that provides reliable mechanical engagement and predictable clamping force when used with the matching nut, ensuring repeatable height control in the holder assembly. Can this component be used across different TECWERK holder versions? The component is specified as a spare for all TECWERK quick-change holder versions and is intended to provide consistent fit and function across those designs. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M5 Height Adjusting Screw With Nut For Quick-Change Holder, Set - TECWERK
Reliable spare part with an M5 thread and included locking nut for secure height setting; benefits from a compact size A design and direct compatibility with TECWERK change holders — order directly via Metav Werkzeuge or consult our advisors for fitment details. Height-adjustment screw size A M5 incl. nut – height-adjustment component for TECWERK change holders The Height-adjustment screw size A M5 incl. nut is a replacement fastening element engineered for precise tool-height adjustment in TECWERK change-holder systems, providing a straightforward retrofit for maintenance and setup tasks. M5 threaded adjustment screw Includes locking nut Spare part for TECWERK holders Compact A-size design Accurate alignment that reduces setup time The adjustment fastener provides a consistent reference for tool height thanks to its M5 thread and matching nut, which together allow fine, repeatable calibration. By using a standardised thread size, the component simplifies alignment routines and reduces the risk of cumulative tolerance errors during tool changes. This stability translates into fewer trial cuts and less machine downtime, making process control more efficient across repeated set-ups. Compatibility that keeps production moving Designed specifically as a replacement for TECWERK change-holder variants, this part restores original fit and function without the need for adapter kits. The labelled spare-unit fits the intended holders and reinstates the original adjustment range, helping maintain cycle times and part quality. Integrating genuine spare components supports predictable behaviour under load and reduces surprises in serial production. Simple replacement and low-maintenance operation The item is supplied complete with a locking nut, enabling rapid exchange on the shop floor and immediate return to operation. The compact A-size form factor keeps access and handling straightforward during service intervals. Fewer steps in the replacement procedure mean lower skilled-labour time for recurring maintenance, which supports lean workshop practices and consistent output. A pragmatic choice for dependable workshops Choosing a standardised adjustment screw from recognised suppliers aligns with a broader quality strategy: predictable spare-part availability, easy stocking and straightforward traceability. Paired with Metav’s logistics and product range, this component contributes to a reliable supply chain and a pragmatic approach to workshop inventory management. The result is enhanced operational certainty and a more efficient maintenance workflow. Contact Metav Werkzeuge to confirm compatibility and secure the TECWERK M5 height-adjustment screw for prompt replacement or batch stocking Technical data SKU: 2000832422NW Product type: Height-adjustment screw Thread: M5 Core data Pack unit: 1 Size designation: A Special features Includes nut Spare part for TECWERK change-holder versions Label: Height-adjustment screw size A M5 incl. nut FAQ What thread size does the adjustment screw use? The adjustment screw uses an M5 thread; the unit is supplied complete with a locking nut for secure clamping. Is this part compatible with all TECWERK change holders? Yes, the item is intended as a spare part for TECWERK change-holder variants and restores original adjustment function. What is included in the delivery? Delivery comprises the height-adjustment screw size A M5 and the matching locking nut as a ready-to-fit set (SKU 2000832422NW). Can the component be replaced on the shop floor without special tools? Replacement is designed to be straightforward; standard spanners for an M5 nut are sufficient for removal and refit. Does the spare item require additional calibration after fitting? After mechanical installation, a brief verification of tool height is recommended to confirm the original setpoint; no specialised calibration is normally required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M7 Height Adjustment Screw With Nut For Interchangeable Tool Holder, Set - TECWERK
Take advantage of the size B format with a standard M7 thread and the included nut to ensure fast, reliable replacement in TECWERK interchangeable holder systems. Order directly via Metav Werkzeuge or contact the technical advisers for compatibility questions. Height-adjusting screw size B (M7) incl. nut – for TECWERK interchangeable holder A height-adjusting screw size B (M7) designed as a spare part for TECWERK interchangeable holders, enabling controlled height correction and secure fastening in tool-holding assemblies. Size B height adjustment M7 threaded connection Supplied with matching nut Spare part for TECWERK holders Minimise downtime with assured compatibility and fast replacement As a dedicated spare component, this height-adjusting screw provides straightforward compatibility with different versions of TECWERK interchangeable holders, reducing setup time and limiting production interruptions. The availability of a designated replacement screw for the holder family means maintenance teams can restore tool geometry quickly; fewer adjustments are required after fitting, which translates to improved process stability and predictable machine uptime. The component’s role as a direct spare part supports a streamlined spare-parts inventory strategy for workshops and production lines. Secure clamping through standard M7 metric threading The M7 designation refers to a metric thread with a nominal 7 mm diameter, a common standard that supports robust mechanical engagement. A standardised thread specification simplifies procurement and replacement, allowing technicians to match the screw with existing hardware without uncertainty. The thread profile ensures a secure connection under typical clamping loads, helping to maintain repeatable positioning of the tool holder and preventing loosening during operation. Clear reference to the M7 format aids engineering documentation and spare-parts management. Practical maintenance: set contents and adjustment benefit The delivery scope includes the screw and a matching nut, so no separate fastening hardware is required at installation. Including the nut in the set reduces assembly steps and minimises the risk of incorrect parts being used during repairs or height adjustments. The component allows fine height correction in the tool-holder interface, supporting precise tool alignment and consistent machining results. Regular use as a replaceable part contributes to predictable tool performance and eases the workload for maintenance staff when restoring holders to specification. For guaranteed compatibility with TECWERK holder ranges and prompt spare-part supply, contact Metav Werkzeuge — technical advisers can be consulted to confirm fitment and delivery options via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 2000832423NW Product type: Height-adjusting screw Label: Height-adjusting screw size B M7 incl. nut for interchangeable holder TECWERK Facts Thread: M7 Size/type: B Packaging unit: 1 UID: 2000832423NW Special features Spare part for all TECWERK interchangeable holder versions Set content: includes nut Intended use: height adjustment in interchangeable holders FAQ Is this screw compatible with all TECWERK interchangeable holders? The height-adjusting screw size B (M7) is specified as a spare part for TECWERK interchangeable holder versions and is intended for direct compatibility with those holder designs. What does M7 mean for the thread and fit? M7 denotes a metric thread with a nominal 7 mm diameter; the specification ensures standardised fit and mechanical engagement suitable for the intended tool-holder interface. Does the delivery include the fastening hardware needed for installation? Yes, the set content states that the screw is supplied with a matching nut, so separate purchase of the nut is not necessary for standard installation. Can this component be used as a maintenance spare to reduce setup time? The screw is designed as a replacement part to restore accurate height adjustment quickly, making it suitable for maintenance inventories aimed at reducing machine downtime. What is the article number for ordering and reference? The product is listed under article number 2000832423NW for ordering and internal documentation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M9 Height Adjustment Screw With Nut For Quick-Change Holder, Set - TECWERK
Take advantage of precise, repeatable height setting for quick-change toolholders combined with straightforward installation — the included nut simplifies assembly and reduces downtime. Order directly via Metav Werkzeuge or consult our specialists for compatibility checks. Height-adjusting screw size C (M9) – replacement for TECWERK quick-change holders Height-adjusting screw size C (M9) for fine height setting in quick-change toolholder systems and workshop applications. Compatible with TECWERK quick-change holders M9 metric thread for precise adjustment Delivered complete with locking nut Size C designation for standard holders Achieve consistent tool height with fine, metric adjustment The height-adjusting screw provides a reliable means of setting and repeating tool height in quick-change systems. With an M9 metric thread, the adjuster allows for small, controlled movements that translate into consistent cutting depths and improved part tolerances. As a spare part for toolholders, the component ensures that calibration and reassembly return the holder to its original datum quickly, reducing set-up variability and supporting higher first-pass quality. Fast replacement and reduced machine downtime Designed as a direct spare for all TECWERK quick-change holder variants, the threaded adjuster arrives complete with a locking nut, which simplifies installation and secures the adjustment under vibration. This configuration shortens maintenance cycles: the replacement is straightforward, the mechanical interface is standardised by the size C designation, and the preserved alignment reduces the need for lengthy recalibration. The practical result is less production interruption and faster return to productive machining. Procurement confidence and supply continuity Sourcing this replacement through Metav combines workshop practicality with a supply-chain advantage. Metav acts as a quality filter for the European market, offering a broad range of precision parts and supporting procurement consolidation. With a long-standing customer base and extensive product range, Metav provides assurance that this spare part is stocked and dispatched reliably, helping maintain production flow and relieving purchasing uncertainty. Contact Metav Werkzeuge today for compatibility confirmation or to order the TECWERK height-adjusting screw (SKU 2000832424NW); consultants are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832424NW Type designation: C Thread: M9 Manufacturer: TECWERK Product: Height-adjusting screw Set contents: includes nut Packaging unit: 1 Core specifications Thread size: M9 Size designation: C Packaging unit: 1 Special features Spare part for all TECWERK quick-change holder variants Function: height adjustment for toolholders Includes locking nut for secure setting SKU / UID: 2000832424NW FAQ Is this adjuster compatible with all TECWERK quick-change holders? Yes. The height-adjusting screw is specified as a spare part for all TECWERK quick-change holder variants and fits holders using the size C interface. What does the M9 designation mean for adjustment precision? The M9 thread denotes a metric threaded adjuster that enables fine, repeatable height settings; the thread pitch supports precise incremental movement for controlled tool height. Is the locking nut included and ready for installation? Yes. The delivery content for the height-adjusting screw explicitly states the set includes the locking nut, which secures the adjustment after setting. Can the adjuster be used to recover original tool height after maintenance? The threaded adjuster is intended for restoring precise tool height in quick-change systems, helping to return the holder to its original datum and minimising subsequent recalibration. What should be checked when replacing the height-adjusting screw? Verify the size designation (C) and the M9 thread match the quick-change holder; ensure the locking nut is tightened to secure the setting and confirm alignment before resuming production. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com