Precision replacement parts for Gala shredders and granulators that keep production running
GALA replacement parts for shredders and granulators ensure continuous pelletising and recycling by providing robust, process‑optimised components that are fit for purpose, durable and cost‑efficient. Designed for use in underwater pelletising and centrifugal drying lines within plastics compounding, masterbatch production and recycling, these parts support consistent regranulate quality through optimised cutting knives, screen plates and knife heads. They deliver reliable performance in cutting chambers and process water systems while maintaining filtration and drying efficiency.
40.6 x 16.5 x 3.6 Granulator Cutter Blade For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
The hard-wearing composition and exact dimensions ensure long service life and consistent pellet quality in GALA systems. Combine high wear resistance, precise fitting and compatibility with GALA shredders or granulators for reliable production. Order the replacement directly via Metav Werkzeuge or consult our specialists for selection support. Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 — precision blade for GALA recycling and granulation equipment Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 is a purpose-made replacement blade for shredders and granulators, produced from high-alloy tool steel for durable cutting performance Precision-ground 1.3207 EW9Co10 tool steel Dimensions 40.6 x 16.5 x 3.6 mm Compatible with GALA shredders and granulators Optimised for uniform pellet and regranulate quality Consistent cuts through high-wear tool steel The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for wear resistance and edge stability. This composition resists abrasive plastics and fillers, keeping the cutting edge sharper for longer and reducing the frequency of replacements. For operations where changeover time is valuable, the material choice translates into measurable uptime gains and fewer interruptions for blade swaps. Exact fit for stable operation and uniform output With dimensions of 40.6 x 16.5 x 3.6 mm, the blade is produced to tight tolerances to match GALA machine mounting points. A precise fit lowers vibration and runout, which directly improves pellet consistency and reduces fines and dust. Operators benefit from steadier throughput and more predictable downstream processing, while maintenance teams find blade reinstallation straightforward thanks to the accurate form factor. Designed for production use and lower lifecycle cost As a replacement wear part from MetavCUT, this granulator knife is optimised for continuous industrial use: sharp geometry for clean shearing, robust steel for prolonged service life and dimensions that maintain process stability. The practical result is less manual rework, reduced material loss and a more reliable granulation process. Where sustainability matters, longer-lived components also mean fewer spare parts consumed over time. We offer an economical alternative under the MetavCUT brand: our process-optimised wear parts are precisely fitting, durable and specifically developed for productive use. For tailored MetavCUT replacements and rapid supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge to secure durable, process-optimised blades for GALA equipment. Technical data Article number: GALA--40.6x16.5x3.6-13207-EW9Co10 Item: Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 Brand: MetavCUT Material: 1.3207 EW9Co10 Core specifications Dimensions: 40.6 x 16.5 x 3.6 mm Thickness: 3.6 mm Applications and special features For use in shredders, granulators and pelletisers Ensures uniform pellet size and reduced dust Process-optimised geometry for industrial production FAQ Which machines is this blade compatible with? The blade is specified for recycling and granulation lines of GALA; the article GALA--40.6x16.5x3.6-13207-EW9Co10 fits standard GALA shredders and granulators. What advantage does the 1.3207 EW9Co10 material provide? The 1.3207 EW9Co10 composition provides enhanced wear resistance and edge retention, so the MetavCUT granulator knife maintains cutting performance over extended service intervals. Can the blade be resharpened to extend service life? Resharpening depends on the wear pattern; the MetavCUT recycling knife can be reground where geometry permits, helping to recover edge quality and extend usable life. How does precise fitting affect production quality? A precise fit reduces vibration and runout, which improves pellet uniformity and lowers dust generation, supporting steadier throughput and less downstream sorting. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 16.5 x 3.6 Granulator/Chipper Cutter M2 (1.3343 DMo5) For GALA Machines - MetavCUT
High-performance M2 construction and exact 40.6 × 16.5 × 3.6 mm dimensions deliver consistent pellet size, reduced dust and extended runtime; benefit from a precise fit for GALA systems and robust, process-optimised wear behaviour. Order the granulating knife directly via Metav Werkzeuge or consult our specialists for application-specific advice. Granulating / Shredding Knife 40.6 × 16.5 × 3.6 mm (M2 1.3343 DMo5) — MetavCUT A Granulating / Shredding Knife 40.6 × 16.5 × 3.6 mm engineered for reliable size reduction in GALA recycling and pelletising machinery Solid M2 (1.3343 DMo5) wear steel Precise fit 40.6×16.5×3.6 mm for GALA systems Low-dust cutting for consistent pellet quality Process-optimised edge geometry for long service life Proven material and cutting performance for stable production Constructed from M2 (1.3343 DMo5) high-speed tool steel, this granulating knife offers a balance of hardness and toughness that supports sharp cutting edges and predictable wear behaviour. The combination of heat-treated substrate and optimised geometry produces a consistent cut with reduced fines, which directly improves downstream screening and drying performance. Hardness and wear resistance are explained here so procurement and operations can assess lifetime and replacement intervals without specialist metallurgy knowledge. Fit and function that reduce downtime and material loss Designed to match the specified dimensions, the knife provides a precision fit in GALA shredders and pelletisers, eliminating play that can accelerate wear or generate noise. Stable mounting and a clean shearing action lower the amount of dust and micro-particles generated, improving process yield and reducing cleaning intervals. For production environments where throughput and repeatability matter, the geometry and tolerances translate into fewer unscheduled stops and a more predictable maintenance schedule. Maintenance, replacement and sustainability advantages The component’s wear characteristics are tuned to be process-optimised, allowing predictable rotation of spare parts and simpler stock-keeping. Replacement is straightforward when scheduled, limiting labour time and preserving machine availability. By maintaining sharp, matching knives, the system achieves better material quality for regranulate, supporting circular economy goals through higher-quality recyclate. MetavCUT supplies an economical, production-focused alternative to original parts without compromising on fit or longevity — a practical choice for continuous recycling operations. We offer an economical alternative to original manufacturer parts under the MetavCUT brand: our process-optimised wear parts are precisely fitting, long-lasting and engineered specifically for productive, industrial use. Contact Metav Werkzeuge today to secure MetavCUT granulating knives optimised for GALA systems and ensure uninterrupted recycling throughput — our consultants can advise on fitment and stock planning Technical data Article number: GALA--40.6x16.5x3.6-M2-13343-DMo5 Product name: Zerkleinerungsmesser / Granuliermesser 40.6 x 16.5 x 3.6 für GALA Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Specifications Dimensions: 40.6 × 16.5 × 3.6 mm Material: M2 (1.3343 DMo5) SKU: GALA--40.6x16.5x3.6-M2-13343-DMo5 Applications & features Suitable for GALA recycling, shredding and pelletising systems Designed for plastics size reduction and pellet cutting Process-optimised edge geometry for low dust and uniform granulate Wear part intended for productive, continuous use FAQ What materials can be processed with this knife? This granulating knife is intended for plastics size reduction; used in shredders and pelletisers it reliably processes common plastics and offcuts to produce uniform granulate. Is the knife compatible with GALA machines? Compatibility is specified for GALA systems; the part is manufactured to the stated dimensions for direct fitting in the corresponding holder and mounting arrangement. How does the M2 (1.3343 DMo5) material affect service life? M2 tool steel combines hardness and toughness to sustain sharp edges under continuous load, providing predictable wear behaviour and longer intervals between replacements. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 16.5 x 3.6/2 Granulator Knife For GALA Machines, 1.3207 EW9Co10 - MetavCUT
Take advantage of durable, wear-resistant steel and precision-ground geometry to secure consistent pellet quality and reduced downtime; order the blade directly via Metav Werkzeuge or contact our consultants for compatibility advice. Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 – 1.3207 EW9Co10 (MetavCUT) Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 for GALA recycling and granulation machines, engineered to deliver consistent cutting performance and long service life Wear-resistant 1.3207 EW9Co10 steel Exact dimensions 40.6 x 16.5 x 3.6/2 mm Designed for GALA recycling machines Precision ground for clean, even cuts Maximise throughput with uniform cutting quality The knife is designed to ensure consistent pellet quality and stable machine throughput in recycling and granulation lines. Applied in shredders, granulators and cutting mills, the blade ensures a uniform cut size that supports downstream screening and washing processes. Using a wear-resistant steel grade and a precision-ground edge, this component reduces the frequency of unplanned stops and supports predictable production planning. The combination of dimensional accuracy and a sharp cutting geometry results in reduced dust generation and fewer rework cycles, which directly improves processing efficiency. Material choice that extends service intervals Manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for abrasion resistance and edge retention, the blade balances hardness with toughness to withstand the mechanical stresses of recycling applications. The material selection helps retain a sharp edge under cyclic loading and abrasive contact with contaminants often found in feedstock. As a result, tool change intervals are extended and total operating costs are lowered through reduced consumable turnover. The material also contributes to a stable cut surface, supporting downstream quality and lowering the need for secondary processing. Accurate fit for reliable operation and easy replacement With exact dimensions of 40.6 x 16.5 x 3.6/2 mm, the knife is produced to fit GALA machines without additional modification, enabling quick replacement and minimal downtime. Precision grinding of the cutting face improves cutting performance, while the standardised geometry simplifies inventory management for maintenance teams. The blade’s design supports consistent feed behaviour and even wear distributions, which helps maintain output rate and particle homogeneity over time. For operators and maintenance staff, the clear specification and repeatable mounting reduce installation time and the risk of incorrect assembly. Mit der Marke MetavCUT bietet Metav eine kosteneffiziente Alternative zu Originalersatzteilen: Unsere prozessoptimierten Verschleißkomponenten sitzen passgenau, sind langlebig und speziell für den produktiven Dauereinsatz konzipiert. Choose MetavCUT blades via Metav Werkzeuge for predictable machine performance; contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and supply. Technical Data SKU: GALA--40.6x16.5x3.6/2-13207-EW9Co10 Article name: Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40.6 x 16.5 x 3.6/2 mm Facts Dimensions: 40.6 x 16.5 x 3.6/2 mm Special features Application: recycling, shredding, granulating Compatible with GALA recycling and granulation machines Precision-ground cutting edge Wear part optimised for industrial production environments FAQ What materials can this knife process effectively? The knife, manufactured from 1.3207 EW9Co10, is intended for typical recycling feeds such as plastic waste, films, sprues and profiles used in GALA granulation and shredding systems. Is this blade a direct replacement for GALA machines? Yes, the Granulator and Shredder Knife 40.6 x 16.5 x 3.6/2 is specified to fit GALA recycling and granulation machines and is produced to match the original mounting and dimensional requirements. How does the material 1.3207 EW9Co10 benefit production? The 1.3207 EW9Co10 grade provides improved wear resistance and edge retention, leading to longer service intervals and more stable cutting performance for the blade. Can the blade reduce maintenance-related downtime? By delivering consistent cut quality and extended edge life, the knife reduces the frequency of changes and unplanned stops, improving overall equipment availability in recycling lines. How should the knife be ordered and who supplies it? The blade is supplied under the MetavCUT brand and can be ordered via Metav Werkzeuge; refer to SKU GALA--40.6x16.5x3.6/2-13207-EW9Co10 for exact identification. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 20.6 x 3.6 Granulator Knife, EW9Co10 High-Carbon Tool Steel - MetavCUT
Take advantage of the combination of durable EW9Co10 tool steel, precise 40.6 x 20.6 x 3.6 mm dimensions and fitment for GALA equipment to maintain consistent pellet quality and minimise downtime. Order the MetavCUT granulator/shredder knife directly via Metav Werkzeuge or consult our specialists for application advice. MetavCUT granulator/shredder knife 40.6 x 20.6 x 3.6 mm — EW9Co10 wear-resistant steel MetavCUT granulator/shredder knife 40.6 x 20.6 x 3.6 mm is a purpose-built cutting blade for GALA recycling and pelletising machinery, designed to reduce plastic waste and convert extruded strands into uniform regranulate. High-wear EW9Co10 tool steel Exact size 40.6 x 20.6 x 3.6 mm Compatible with GALA granulators and shredders Sharp ground edge for clean cuts Reliable cutting performance for continuous operation The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel chosen for wear resistance under high-stress conditions. This material selection keeps the cutting edge stable at elevated temperatures and during abrasive processing, which translates into fewer production interruptions and longer intervals between regrinds. The engineering focus is on consistent mechanical properties, which supports steady throughput in recycling lines and granulators. Consistent pellet quality with reduced dust and fines A precisely ground geometry delivers a clean shearing action, producing uniform particle sizes and minimising fines and dust generation. Uniform output simplifies downstream screening and drying processes, improving bulk material handling and product quality. The controlled cutting behaviour helps maintain extrusion and pelletising efficiency, reducing waste and promoting predictable process control. Exact dimensions for straightforward replacement With nominal dimensions 40.6 x 20.6 x 3.6 mm, the knife is manufactured to tight tolerances so replacement is reproducible and quick. Proper fitment reduces vibration and blade play, which in turn preserves gearboxes and bearings in the cutting unit. The dimensional accuracy supports repeatable assembly and consistent blade-to-counterknife engagement, essential for both shredders and granulators. Durability that lowers lifecycle costs The material composition and thermal treatment focus on achieving a balance between hardness and fracture toughness. This results in blades that resist edge chipping while maintaining a serviceable cutting angle for longer. Longer blade life reduces tooling exchanges and maintenance windows, contributing to a lower total cost of ownership for recycling operations and pelletising lines. Application scope and compatibility Designed specifically for use in GALA recycling systems, shredders and pelletisers, the blade suits a wide range of polymer processing tasks, from film and sheet to sprues and extrusion strands. Its geometry and material are selected to handle abrasive and soft plastics alike, enabling versatile use across mixed-waste or dedicated production lines. Where process consistency and cut quality are priorities, this knife performs reliably. Contact Metav Werkzeuge for supply and application guidance on MetavCUT granulator and shredder knives to secure continuous production and optimised pellet quality We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process‑optimised wear parts are precisely fitting, durable and developed specifically for productive use. Technical data Article number: GALA--40.6x20.6x3.6-13207-EW9Co10 Material: 1.3207 EW9Co10 Dimensions: 40.6 x 20.6 x 3.6 mm Manufacturer: MetavCUT UID: GALA--40.6x20.6x3.6-13207-EW9Co10 Facts Size: 40.6 x 20.6 x 3.6 mm Material grade: 1.3207 EW9Co10 SKU: GALA--40.6x20.6x3.6-13207-EW9Co10 Special features For recycling, shredding and pelletising applications Designed for GALA granulators and shredders Wear-resistant, cobalt-alloyed tool steel Ground cutting edge for reduced fines FAQ What machines is this knife compatible with? The MetavCUT granulator/shredder knife is compatible with recycling systems, shredding lines and pelletiser units from GALA and is designed to match the original blade envelope and fixation. Which materials can be processed with this blade? The knife is intended for typical plastic waste streams used in recycling and granulation; its EW9Co10 composition performs well across a range of polymers and contaminated feedstocks. How does the material affect service life? The 1.3207 EW9Co10 steel provides increased wear resistance and thermal stability, which gives the knife a longer cutting life compared with non‑alloyed steels under similar operating conditions. Can the blade be resharpened? Yes, the blade geometry permits regrinding; resharpening restores edge performance and extends the operational lifespan of the MetavCUT knife when performed to original profiles. What improvement in output quality can be expected? Using a precisely ground MetavCUT granulator/shredder knife typically reduces fines and produces a more uniform particle distribution, supporting improved downstream processing and consistent pellet quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 20.6 x 3.6/2.1 Granulator Knife For GALA Machines, M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of high wear resistance, precise fit and consistent cutting quality to keep production running smoothly. Order matching replacement blades via Metav Werkzeuge or ask their consultants for application advice. Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6/2.1 — M2 (1.3343 DMo5) wear knife for GALA machines by MetavCUT The Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6/2.1 is a dedicated wear part for GALA recycling and pelletising systems, engineered to provide consistent granulate quality and reduced dust generation Precision ground in M2 1.3343 DMo5 Exact fit for GALA recycling systems Optimised edge geometry for clean cuts Durable wear part for continuous production Consistent pellet quality from a precision blade A consistent pellet size stems from a sharp, accurately profiled cutting edge and a stable blade geometry. Made from M2 1.3343 DMo5, the knife offers a high level of edge retention and dimensional stability, which translates into uniform pellets and fewer fines. Reduced dust formation and even particle distribution help downstream processing, lower filtration load and improve the quality of regranulate used in extrusion or injection moulding. Reduced downtime through robust wear characteristics The use of a proven high-speed steel at the core of the design ensures reliable wear resistance under continuous operation. The blade’s ground surfaces are finished to maintain cutting performance over longer service intervals, supporting predictable maintenance planning and fewer unscheduled stops. As a result, production throughput becomes more reliable and tool-change cycles can be planned around operations rather than reacting to sudden failures. Exact fit and straightforward replacement for GALA equipment With dimensions of 40.6 x 20.6 x 3.6/2.1 mm and a design matched to GALA systems, this granulator blade provides immediate interchangeability with original housings and blade holders. The precise tolerances reduce adjustment work during replacement and ensure correct blade alignment for a stable cutting gap. The result is fast changeovers and reproducible cutting geometry that preserves final pellet consistency for each production batch. Economical sourcing and traceable quality for workshop efficiency Sourcing wear parts from a specialist supplier streamlines procurement and secures a traceable quality channel. MetavCUT parts combine process-oriented design with production-ready durability to support industrial recycling and shredding tasks. Backed by a reliable logistics base in Emmerich, Metav’s distribution ensures consistent availability and supports a consolidated supplier strategy for workshops and contract processors seeking long-term operational stability. Contact Metav Werkzeuge on +49 2822 7131930 or info@metav-werkzeuge.com to arrange supply of MetavCUT granulator knives and expert application guidance for GALA systems Technical data Article number: GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5 Material: M2 1.3343 DMo5 Dimensions: 40.6 x 20.6 x 3.6/2.1 mm Brand: MetavCUT Suitable for: Recycling plants, shredding systems or pelletising systems by GALA Facts Nominal length: 40.6 mm Nominal width: 20.6 mm Thickness: 3.6/2.1 mm SKU: GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5 Special features High-speed steel construction Wear part for granulators and shredders Optimised cutting geometry for low dust and uniform material Engineered for continuous production environments Compatible with GALA machines FAQ Is this knife compatible with GALA granulators and shredders? The MetavCUT granulator knife is designed for direct compatibility with GALA recycling, shredding and pelletising equipment and matches the original mounting dimensions. Which materials can be processed with this blade? The knife made from M2 (1.3343 DMo5) is suitable for a broad range of thermoplastics and common recycling feedstocks; performance depends on feed composition and cutter setup. Can the blade be resharpened or is it a one-time use part? The MetavCUT granulator knife can be resharpened to restore cutting geometry; resharpening intervals depend on application, abrasiveness of the feed and maintenance practice. How does the M2 1.3343 DMo5 material affect service life? M2 high-speed steel provides a balance of hardness and toughness, offering extended edge life under typical granulation loads while maintaining predictable wear patterns. What should be considered when replacing the blade to maintain pellet quality? Maintain correct blade-housing alignment and the original cutting gap; the listed dimensions ensure a repeatable fit when the replacement follows the specified tolerances (see SKU GALA--40.6x20.6x3.6/2.1-M2-13343-DMo5). MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive use.
40.6 x 20.6 x 3.6/2.1 Granulator Knife For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Robust 1.3207 EW9Co10 alloy, a precisely ground 40.6 x 20.6 x 3.6/2.1 mm profile and direct compatibility with GALA recycling systems deliver consistent cutting performance and improved pellet quality. Order the GALA granulator knife directly via Metav Werkzeuge or ask our consultants if needed. GALA granulator knife 40.6 x 20.6 x 3.6/2.1 – 1.3207 EW9Co10 (MetavCUT) The GALA granulator knife 40.6 x 20.6 x 3.6/2.1 is a precision wear part for GALA shredders and pelletiser systems, engineered from high-alloy 1.3207 EW9Co10 steel for demanding recycling applications. *High-alloy 1.3207 EW9Co10 steel for long life *Precisely ground 40.6 x 20.6 x 3.6/2.1 profile *Designed for GALA shredders and granulators *Ensures uniform pellets with reduced dust Consistent pellets through precision cutting A precisely finished cutting edge ensures uniform pellet quality and predictable material flow in downstream processes. The geometry and finish of the blade control chip size and strand behaviour during cutting, which leads to dust reduction and fewer fines. For recycling and granulating tasks, that stability reduces waste, simplifies sieving and lowers the effort required in subsequent handling and melting steps. Durability that reduces maintenance cycles Manufactured from 1.3207 EW9Co10, the blade benefits from a high-cobalt, wear-resistant composition that maintains edge integrity under abrasive conditions. The result is improved service life and fewer blade changes, which supports higher machine uptime and lower maintenance frequency. Sturdiness and predictable wear behaviour contribute directly to operational efficiency in continuous recycling lines. Exact fit for reliable machine performance The defined 40.6 x 20.6 x 3.6/2.1 mm cross-section and precision grinding ensure an accurate fit in GALA knife holders and rotor assemblies. Correct blade geometry preserves the required clearances and cutting angles, preventing impact damage and uneven wear. When assembly tolerances are kept, cutting forces remain balanced and the machine operates with reduced vibration and improved product consistency. Material and application advantages Optimised for plastic waste processing, the blade design supports shredding of film, sprues, pipes and plate material as well as granulation of extruded strands. The combination of high wear resistance and clean-cutting geometry leads to efficient cutting at typical granulation speeds while helping to maintain melt quality. As a process-optimised spare part from MetavCUT, the knife is intended for productive, industrial use where repeatable results matter. For reliable, long-lived cutting performance choose MetavCUT granulator knives—contact Metav Werkzeuge in Emmerich for availability and tailored technical advice Technical data SKU: GALA--40.6x20.6x3.6/2.1-13207-EW9Co10 Product: GALA granulator knife 40.6 x 20.6 x 3.6/2.1 Manufacturer: MetavCUT Facts Material designation: 1.3207 EW9Co10 Dimensions: 40.6 x 20.6 x 3.6/2.1 mm SKU number: GALA--40.6x20.6x3.6/2.1-13207-EW9Co10 Special features Suitable for GALA recycling, shredding and pelletising systems High-alloy, cobalt-containing tool steel for wear resistance Precision-ground profile for reduced dust and uniform pellets Process-optimised replacement part for industrial use FAQ What machines is this blade compatible with? The GALA granulator knife 40.6 x 20.6 x 3.6/2.1 is designed specifically for GALA recycling and granulation systems and fits knife holders matching these dimensions. What advantages does 1.3207 EW9Co10 offer? The 1.3207 EW9Co10 material combines high wear resistance and thermal stability, which helps the blade maintain edge life and consistent cutting performance in abrasive plastic-processing environments. Can this knife be used for different plastic types? Yes, the knife is suitable for processing a range of plastics such as film, sprues, pipes and plates; geometry and sharpness support consistent granulate quality across common polymer types. How does the blade affect dust and fines generation? The precise ground profile and correct edge geometry promote clean shearing action, which leads to dust reduction and fewer fines compared with worn or improperly matched knives. Is regrinding possible or recommended? Regrinding may be feasible depending on wear history and maintaining original profile tolerances; consult technical advice from Metav Werkzeuge to assess rework options and safe limits. What should be considered when replacing the blade? Ensure the knife holder and counter-knife are in serviceable condition and that the specified 40.6 x 20.6 x 3.6/2.1 mm dimensions are observed to preserve cutting geometry and machine balance. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, durable and designed specifically for productive, industrial use.
40.6 x 27 x 3.6 Granulator/Crusher Knife, 1.3207 EW9Co10 - MetavCUT
Robust, precisely sized cutting geometry and 1.3207 EW9Co10 tool steel ensure consistent throughput and long service life; order the knife directly via Metav Werkzeuge or consult our specialists for application advice. MetavCUT Shredder Knife / Granulator Knife 40.6 x 27 x 3.6 – for GALA machines MetavCUT Shredder Knife / Granulator Knife 40.6 x 27 x 3.6 is a replacement cutting blade designed for shredders and granulators used in industrial recycling and pelletising applications Precision ground cutting edge for uniform cuts High-wear cobalt-alloy tool steel for durability Compatible with GALA recycling and pelletising machines Optimised for low dust and consistent pellet size Increased uptime through predictable cutting performance Made to the exact dimensions 40.6 x 27 x 3.6, the MetavCUT Shredder Knife / Granulator Knife 40.6 x 27 x 3.6 delivers a stable cutting geometry that reduces vibration and uneven wear. The precise tolerance of the blade supports consistent pellet size and lower rates of rework, which translates directly into improved line efficiency. For production managers, this means fewer unplanned stops and a steadier output quality from shredders and granulators. Durable material and clear explanation of technical benefits Constructed from 1.3207 EW9Co10, the blade combines tool-steel strength with cobalt alloying indicated in the material code; this composition is selected to maintain edge stability under the strain of recycling feedstocks. The specific material choice enhances wear resistance and helps retain sharpness over longer cycles. For operators unfamiliar with steel grades: the designation identifies a high-performance cutting material intended for demanding abrasive applications, resulting in longer intervals between blade changes. Cleaner processing and better downstream quality Sharp, well-matched knives reduce fines and dust formation during size reduction, improving air quality in the plant and decreasing material loss. The optimised cutting edge promotes uniform throughput and steadier melting behaviour downstream, which benefits pelletisers and regranulation systems by producing more uniform pellets and reducing filtration or sieving requirements. Maintenance routines are simplified by predictable wear patterns, aiding planning for spare-part stocking and blade replacement schedules. Contact Metav Werkzeuge today to secure MetavCUT replacement knives for reliable, efficient recycling operations and to discuss fitment options for GALA machinery We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, durable and specially developed for productive use. Technical data Article number: GALA--40.6x27x3.6-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 40.6 x 27 x 3.6 for GALA machines from 1.3207 EW9Co10 Facts Dimensions: 40.6 x 27 x 3.6 mm Material designation: 1.3207 EW9Co10 SKU: GALA--40.6x27x3.6-13207-EW9Co10 Special features Intended application: shredders, granulators, pelletisers in recycling systems Brand: MetavCUT Benefit focus: uniform pellet size, low dust generation, extended edge life FAQ Which machines is this knife compatible with? The knife is specified for use in recycling, shredding and pelletising equipment of the GALA series and is dimensioned to match corresponding knife holders and mounting patterns. What materials can the blade process effectively? Designed for common recycling tasks, the blade handles plastic wastes such as sprues, films, pipes and sheets and supports subsequent granulation and pelletising stages with reduced fines. How does the material designation affect service life? The 1.3207 EW9Co10 designation indicates a cobalt-alloyed tool steel selection that promotes edge retention and wear resistance, extending operating intervals compared with standard carbon tool steels. How is blade performance translated into plant advantages? Sharper, dimensionally accurate knives produce uniform cuts that reduce dust and variability, which improves melt homogeneity and downstream pellet quality while lowering cleaning and rework demands. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 27 x 3.6 mm Granulator/Crusher Knife For Gala Machines, M2 (1.3343 DMo5) - MetavCUT
The combination of wear‑resistant M2 (1.3343 DMo5) tool steel, precise 40.6 x 27 x 3.6 sizing and a fit optimised for GALA machines ensures consistent pellet quality and reduced downtime; order directly from Metav Werkzeuge or request specification advice from our consultants for a reliable retrofit solution. Granulator / Shredder Knife 40.6 x 27 x 3.6 — M2 (1.3343 DMo5) for GALA machines by MetavCUT The Granulator / Shredder Knife 40.6 x 27 x 3.6 is a heavy‑duty cutting blade designed for recycling and granulating applications, manufactured from M2 (1.3343 DMo5) high‑speed tool steel for precision cutting in GALA machines. Precision ground M2 tool steel Exact OEM fit for GALA machines Consistent pellet size, low dust Durable edge for extended service life Engineered for reliable throughput in recycling systems The blade serves as a central wear part in shredders and granulators, engineered to cut plastics, film, pipes and sprues into a processable size with consistent pellet quality. Made from M2 (1.3343 DMo5), the knife is ground to tight tolerances so that the cutting action remains stable across production runs. Stable cutting reduces rework and secondary processing, which in industrial recycling translates directly into measurable gains in throughput and lower reject rates. Because the geometry is matched to GALA machines, vibration and uneven wear are minimised, supporting predictable maintenance intervals. Material properties and edge behaviour explained M2 is a high‑speed tool steel known for a balance of hardness and toughness; in practice this means a cutting edge that resists deformation while retaining the ability to be reconditioned if required. The selected steel grade supports high mechanical and thermal loads common in granulating processes, delivering a durable edge that preserves cutting geometry. Reduced edge chipping leads to fewer fines and a lower dust fraction in the granulate, which improves melt quality downstream and reduces filtration and extrusion issues in reprocessing. Production benefits: improved quality, uptime and efficiency A precisely matched blade profile produces uniform particle size, which lowers screening losses and helps stabilise extrusion or pelletising lines. The process‑optimised design lowers energy peaks during cutting and decreases the frequency of unscheduled stops: both factors contribute to better overall equipment effectiveness (OEE). For operations where material purity and particle uniformity affect final product value, the advantages are direct — less contamination, reduced postcode‑sorting of off‑grade material and a steadier feed to downstream equipment. Compatibility, maintenance logic and sourcing advantage The knife is supplied as a ready replacement for GALA machines and is manufactured to dimensional specification 40.6 x 27 x 3.6, ensuring a clean drop‑in installation without time‑consuming fitting work. Sourcing process‑optimised wear parts from a single trusted supplier reduces administrative overhead and shortens lead times between failures. MetavCUT’s approach focuses on parts that fit precisely and endure in productive environments, reducing the total cost of tooling ownership over multiple maintenance cycles. With our MetavCUT brand, an economical alternative to original manufacturer parts is offered: the range of process‑optimised wear parts is produced for precise fit, long life and direct suitability for productive use, providing a reliable option for workshops and recycling plants seeking robust replacements. Discuss specification and delivery options with Metav Werkzeuge in Emmerich or request tailored advice for integration into GALA systems — contact our consultants at Metav Werkzeuge for a reliable replacement solution from stock. Technical Data Article number: GALA--40.6x27x3.6-M2-13343-DMo5 Manufacturer: MetavCUT Material: M2 (1.3343 DMo5) Dimensions: 40.6 x 27 x 3.6 Facts Length: 40.6 mm Width: 27 mm Thickness: 3.6 mm SKU: GALA--40.6x27x3.6-M2-13343-DMo5 Special features Application: knives for shredders and granulators Fit: for GALA machines Benefit: uniform pellet size, low dust generation Design: process‑optimised wear part for industrial use FAQ What materials can this knife process effectively? The knife, produced from M2 (1.3343 DMo5) tool steel, is intended for cutting common recycling materials such as films, pipes and sprues; the blade is specified to provide consistent results in granulating and shredding applications. Is this a direct replacement for original GALA blades? Yes, the blade is manufactured to the dimensional specification 40.6 x 27 x 3.6 to ensure an exact fit for GALA machines, allowing a straightforward replacement without modification. How does the M2 material affect service life? M2 (1.3343 DMo5) offers a balance of hardness and toughness that preserves edge geometry under repeated mechanical stress, resulting in longer intervals between replacements and more predictable maintenance scheduling. Can the blade be reconditioned or ground on site? The knife’s geometry and material permit regrinding where appropriate; reconditioning returns cutting performance and extends useful life, contributing to lower long‑term tooling costs. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 27 x 3.6/2.1 Granulator Knife For GALA Recycling Machines, EW9Co10 1.3207 - MetavCUT
Take advantage of a combination of durable 1.3207 EW9Co10 tool steel and precision grinding for consistent pellet quality and extended service intervals, ensuring uninterrupted recycling throughput. Order the blade directly via Metav Werkzeuge or consult our specialists for compatibility and delivery details. Granulator/shredder blade 40.6 x 27 x 3.6/2.1 (1.3207 EW9Co10) — MetavCUT A Granulator/shredder blade 40.6 x 27 x 3.6/2.1 designed for use in GALA recycling and pelletising machinery, optimised for clean cutting and long wear life Wear-resistant 1.3207 EW9Co10 alloy Precision ground for consistent pellet quality Compatible with GALA shredders and granulators Reduced dust and extended cutting intervals Reliable cutting performance for continuous recycling operations The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed tool steel selected for its wear resistance and dimensional stability under load. In practice, this material composition supports a longer service life and sustained cutting edge retention in demanding recycling environments. Specified for GALA equipment, the component is suitable where repeatable, high-quality size reduction is required, helping to maintain throughput and reduce unplanned downtime by minimising blade changes. Uniform pellet quality and lower maintenance effort Precision grinding and tight dimensional control yield a consistent cut geometry, which translates into more uniform pellets and lower fines generation. Fewer fines reduce downstream screening and drying loads, improving overall process efficiency. The result is less plant dust and cleaning effort, as well as more predictable maintenance planning. For operators of shredders and granulators, the technical advantage is a measurable reduction in processing variability and associated labour for clean-up and rework. Process-focused design that supports production continuity As a process-optimised wear part, this blade is shaped and finished to match GALA machine interfaces, enabling straightforward replacement and reliable seating in the cutter assembly. Durable edge characteristics and material selection help extend time between regrinds, supporting continuous production runs. Backed by MetavCUT’s supply chain in Emmerich, spare-part availability is aligned with industrial needs to limit lead times and keep material flow consistent. Mit unserer Marke MetavCUT bieten wir eine kosteneffiziente Alternative zu Hersteller-Originalteilen: prozessoptimierte Verschleißteile, die passgenau, langlebig und für den produktiven Einsatz konzipiert sind. Contact Metav Werkzeuge for tailored advice on MetavCUT granulator blades and to arrange supply direct from Emmerich Technical data Article number: GALA--40.6x27x3.6/2.1-13207-EW9Co10 Material: 1.3207 EW9Co10 Dimensions: 40.6 x 27 x 3.6/2.1 Brand: MetavCUT Application: Compatible with GALA recycling and pelletising machines Facts Cutting dimensions in millimetres: 40.6 x 27 x 3.6/2.1 Alloy designation: 1.3207 EW9Co10 SKU identifier: GALA--40.6x27x3.6/2.1-13207-EW9Co10 Special features Process-optimised wear part Precision-ground cutting edge Suited for shredders, granulators and pelletisers Designed to reduce dust and fines Extended cutting intervals and replaceable configuration FAQ What materials can this blade process? The MetavCUT granulator/shredder blade made from 1.3207 EW9Co10 is intended for typical plastic recycling feedstocks processed in GALA machines and is optimised for general plastic waste, film and regrind applications. Is the blade compatible with all GALA machines? Compatibility is specified for GALA shredders and granulators; the blade’s dimensions 40.6 x 27 x 3.6/2.1 match the stated GALA cutter interfaces, though verification against the machine’s spare-part list is recommended. How does the material choice affect service life? The 1.3207 EW9Co10 alloy offers elevated wear resistance and edge stability, which contributes to longer intervals between regrinds and less frequent replacements in continuous recycling operations. Can this component be reground or resharpened? The precision-ground edge of this wear part allows for professional reground cycles; maintaining correct blade geometry is essential to preserve pellet quality and minimise dust. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 27 x 3.6/2.1 Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of a precision-ground M2 (1.3343 DMo5) blade and an exact 40.6 × 27 × 3.6/2.1 mm fit to maintain steady granulate quality and reduce downtime; order replacement knives directly via Metav Werkzeuge for reliable supply and production continuity. GALA--40.6x27x3.6/2.1-M2-13343-DMo5 — Granulator / Shredder knife, M2 tool steel, 40.6 × 27 × 3.6/2.1 mm The GALA--40.6x27x3.6/2.1-M2-13343-DMo5 is a precision granulator blade designed for use in GALA recycling and pelletising machinery, manufactured from high-speed M2 (1.3343 DMo5) tool steel for consistent cutting performance Precision-ground M2 (1.3343 DMo5) tool steel blade Dimensions 40.6 × 27 × 3.6/2.1 mm Fit for GALA recycling and granulator machines Ensures uniform pellet quality and low dust Consistent pellet quality through material and geometry The blade’s composition in M2 tool steel (1.3343 DMo5) delivers a balance of hardness and toughness, which is essential for processing a variety of plastics in recycling and pelletising operations. Heat treatment and precision grinding result in an edge geometry that preserves cutting performance over extended cycles, yielding uniform pellet size and reducing fines and dust. For operators this translates into fewer rejects and more predictable downstream processing, while the material choice makes the blade suitable for continuous industrial use. Designed for quick replacement and reliable fit With the compact 40.6 × 27 × 3.6/2.1 mm footprint and machine-specific tolerances, the blade provides a precise fit in GALA granulator modules. The dimensioned design simplifies stock management and minimises installation time during changeovers, supporting efficient maintenance routines. As a wear part produced to match original equipment interfaces, the blade helps sustain line uptime and reduces the need for time-consuming adjustments after replacement. Operational benefits: efficiency, cleanliness and lower lifecycle cost A sharp, well-matched knife improves cutting efficiency, which in turn reduces motor load and energy consumption for the same throughput. The controlled cut lowers the generation of fines, improving material quality and reducing cleaning cycles and filter wear. Viewed over multiple change intervals, the combination of high initial sharpness and predictable wear behaviour leads to better overall cost-efficiency compared with inconsistent or poorly fitting alternatives. With MetavCUT spare parts designed to match OEM specifications, the blade supports uninterrupted production and consistent regranulate quality. With the MetavCUT range, an economical alternative to original manufacturer parts is offered: process‑optimised wear parts are precisely fitting, durable and specifically developed for productive industrial use. For tailored replacement knives and steady granulator performance, contact Metav Werkzeuge in Emmerich to discuss MetavCUT granulator blades and ensure dependable supply for GALA systems. Technical Data SKU: GALA--40.6x27x3.6/2.1-M2-13343-DMo5 Product: Granulator / shredding knife for GALA machines Material: M2 (1.3343 DMo5) Dimensions: 40.6 × 27 × 3.6/2.1 mm Brand: MetavCUT Facts Dimensioned thickness: 3.6 / 2.1 mm Overall length × width: 40.6 × 27 mm Special features Precision-ground edge Wear part for recycling and pelletising Designed for GALA granulators Process-optimised geometry Durable high-speed tool steel FAQ What machines is this blade compatible with? This blade is made for GALA recycling and pelletising machines and is dimensioned for direct fit in the specified GALA modules. What material is the knife made from and why does it matter? The knife is manufactured from M2 (1.3343 DMo5) high-speed tool steel; this material provides a combination of hardness and toughness that preserves a keen cutting edge and extends service life in continuous recycling operations. How does the blade affect granulate quality? A precision-ground blade ensures a clean cut that produces uniform pellets, reduces fines and dust, and improves downstream processing consistency. Can the blade be used on different polymer types? The blade is intended for standard recycling and granulating tasks in industrial systems; the chosen steel grade and geometry support reliable cutting of common plastics processed in GALA equipment. Is the blade supplied ready to install? The blade is produced to machine-specific dimensions for straightforward installation into compatible GALA units. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 32.4 x 3.6 Granulator/Crusher Knife, M2 (1.3343/DMo5) - MetavCUT
Benefit from the combination of precision-ground M2 (1.3343 DMo5) construction and exact 40.6 x 32.4 x 3.6 mm dimensions to maintain consistent pellet quality and low dust generation in recycling lines; order replacements directly via Metav Werkzeuge or consult our technical advisors for compatibility checks. Granulator knife / Shredder blade 40.6 x 32.4 x 3.6 mm — M2 (1.3343 DMo5) by MetavCUT A granulator knife designed for GALA recycling, shredding and pelletising systems to deliver uniform cuts and dependable wear performance in continuous industrial operation. Precision-ground M2 tool steel for long life Exact dimensions 40.6 x 32.4 x 3.6 mm Engineered for GALA shredders and granulators Low-dust, consistent pellet and granulate quality Improved pellet quality through precise cutting The blade is made from M2 (1.3343 DMo5) high-speed tool steel, heat-treated and ground to tight tolerances to ensure a stable cutting edge over extended runs. This precision reduces fines and irregular fragments, resulting in consistent pellet quality that enhances downstream processing and reduces rework. For operators of shredders and granulators, a reliably sharp wear part means less sieving and lower reject rates, translating into measurable process efficiency gains. Designed for quick replacement and steady uptime With exact 40.6 x 32.4 x 3.6 mm dimensions, the knife is manufactured for a proper fit in GALA machines, simplifying installation and aligning with existing blade carriers. The correct fit reduces vibration and uneven wear, which preserves blade geometry and prolongs service intervals. By lowering the frequency of interventions, the component supports continuous production and helps maintain planned output without unexpected stoppages. Industrial wear resistance for demanding applications As a dedicated wear part for recycling plants, the component performs reliably on materials such as films, pipes, sprues and general plastic waste in both shredding and pelletising stages. The material choice delivers a balance of hardness and toughness suitable for repeated impact and abrasive conditions. Clear separation between a granulator knife (cuts molten strands or extrudate into pellets) and a shredder blade (reduces waste to feed size) helps to match the tool to the required application and optimise tool life. Contact Metav Werkzeuge for tailored replacement blades or speak with our technical advisors to confirm compatibility with GALA systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GALA--40.6x32.4x3.6-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40.6 x 32.4 x 3.6 für GALA Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Facts Dimensions: 40.6 x 32.4 x 3.6 mm Material: M2 (1.3343 DMo5) Special features Application: shredders, granulators, pelletising systems Function: wear part for size reduction and pellet cutting Performance: precision ground, low dust generation, consistent cut quality FAQ What materials can this knife process? The granulator knife is intended for plastic waste streams commonly handled in recycling plants; as a wear part it is suitable for shredding and granulating films, pipes, sprues and similar polymer materials within GALA systems. How does the M2 (1.3343 DMo5) material affect service life? M2 (1.3343 DMo5) provides a high-speed tool steel composition that balances hardness and toughness, giving the blade a long service life under abrasive and impact conditions typical in granulating and shredding operations. Is this blade a direct replacement for GALA originals? The component is engineered to the stated 40.6 x 32.4 x 3.6 mm dimensions for compatibility with GALA recycling and pelletising machines; MetavCUT wear parts are designed as process-optimised alternatives for reliable fit and function. How does blade geometry influence dust and fines? Sharp, precisely ground cutting edges produce cleaner shearing of polymers, which reduces dust and fine particles during granulation, improving material quality for reprocessing and lowering post-processing requirements. What does regular maintenance of these knives involve? Maintenance typically includes periodic inspection of edge condition, checking for uneven wear, and replacement when tolerances or cutting quality decline; using correctly sized replacement blades helps sustain machine performance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand a cost-effective alternative to manufacturer originals: our process-optimised wear parts are accurately fitting, durable and developed specifically for productive, industrial use.
40.6 x 32.4 x 3.6 mm Shredder/Granulator Knife For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of high-alloy 1.3207 EW9Co10 steel, a precision 40.6 x 32.4 x 3.6 mm profile and a fit engineered for GALA machines to secure consistent pellet quality and reduced downtime; order the replacement knife through Metav Werkzeuge or consult our specialists for suitability and stock advice. MetavCUT Recycling Knife (Granulator) 40.6 x 32.4 x 3.6 mm — 1.3207 EW9Co10 for GALA machines A MetavCUT Recycling Knife (Granulator) engineered for GALA shredders and pelletisers, delivering precise cuts and low-dust processing for a wide range of plastic feedstocks High-alloy 1.3207 EW9Co10 steel Precision 40.6 x 32.4 x 3.6 mm profile Compatible with GALA shredders and granulators Optimised for low dust and uniform granules Consistent cutting quality for repeatable output The blade's high-alloy composition (1.3207 EW9Co10) and finely honed edge provide precision cuts that translate directly into homogenous granules and stable downstream processing. In recycling and granulating applications, edge geometry and surface finish determine particle uniformity and dust formation; a correctly specified knife therefore supports better process control and a reduced load on sieves and filters. This results in predictable machine behaviour and fewer interruptions during continuous production. Extended service life to support continuous runs Manufactured from a wear-resistant alloy, the knife offers increased durability under abrasive and thermally demanding conditions typical for size reduction of films, pipes and regrind. Longer intervals between tool changes mean less mechanical downtime and a steadier throughput. The design focuses on a balance between hardness and toughness to limit chipping while maintaining cutting performance, so maintenance cycles are extended without compromising cut quality or increasing fine dust generation. Exact fit and straightforward replacement to save time With a defined profile of 40.6 x 32.4 x 3.6 mm, the blade is produced to tight tolerances for a precise fit in GALA equipment, eliminating alignment issues that reduce blade life and compromise output. For operators less familiar with granulator tooling, a granulator blade is the component that severs plastic into uniform granules; correct installation prevents uneven wear and vibration. The combination of accurate dimensions and consistent edge geometry simplifies exchange procedures and supports rapid restoration of production parameters. Secure production continuity with MetavCUT quality — contact Metav Werkzeuge in Emmerich for availability, technical clarification and fast dispatch at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GALA--40.6x32.4x3.6-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 40.6 x 32.4 x 3.6 für GALA Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Facts Dimension: 40.6 x 32.4 x 3.6 mm Special features Material: 1.3207 EW9Co10 Suitable for: GALA recycling, shredding and pelletising equipment Application: size reduction of plastics to uniform granules, low dust generation FAQ What types of plastics can this knife process? The MetavCUT recycling knife is intended for a broad range of thermoplastics commonly encountered in recycling plants, including films, profiles, pipes and plate materials, enabling consistent size reduction for subsequent reprocessing. Is this blade compatible with my GALA granulator or shredder? Yes — the blade is specified for use in GALA recycling and pelletising machinery and is manufactured to fit the dimensions required for standard GALA knife holders. How does the 1.3207 EW9Co10 material affect performance? The high-alloy composition provides a combination of hardness and toughness that increases wear resistance while maintaining edge integrity, supporting longer service life and stable cutting performance under abrasive conditions. Can the blade be re-sharpened or reconditioned? Reconditioning depends on the extent of wear and the alloy condition; light regrinding may be possible, but full restoration should be assessed by a specialist to preserve the correct edge geometry and dimensional tolerances. How often should replacement be considered? Replacement intervals vary with feedstock, contamination levels and operating parameters; monitor cut quality and increase in fines or vibration as indicators that the blade requires attention or exchange. MetavCUT — Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten mit der Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40.6 x 32.4 x 3.6/2.1 Granulator/Crushing Knife For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Benefit from the combination of high-grade 1.3207 EW9Co10 steel, precision 40.6 x 32.4 x 3.6/2.1 dimensions and a design matched to GALA systems to secure consistent cut quality and extended service life; order these knives directly via Metav Werkzeuge or request consultation from our specialists. Recycling Knife / Granulator Blade 40.6 x 32.4 x 3.6/2.1 for GALA machines, made from 1.3207 EW9Co10 A Recycling Knife / Granulator Blade engineered for shredders and granulators in GALA recycling lines to deliver uniform material sizing and reliable plant performance. GALA machine compatibility 1.3207 EW9Co10 high-grade steel Precision-ground cutting edge Consistent pellets, low dust Maximise uptime with precise cutting performance The blade's precision-ground cutting edge and defined geometry, supplied in 40.6 x 32.4 x 3.6/2.1 proportions, ensure repeatable shearing action in demanding recycling processes. Manufactured from 1.3207 EW9Co10, the component combines hardness and toughness to resist abrasive wear while reducing the frequency of changeovers. Such material selection is crucial for operations that require stable throughput and predictable maintenance intervals; by avoiding excessive edge breakage and uneven wear, the component contributes directly to higher machine availability and a lower cost per produced tonne. Plug-and-play fit that reduces downtime Designed specifically for use in GALA shredders and pelletisers, the blade offers exact seat dimensions and tolerances to match original assemblies. The careful fit reduces vibration and blade chatter, which in turn decreases secondary wear on shafts and housings. Where replacement parts must be integrated quickly into a productive line, this compatible cutting component supports short machine stops and straightforward installation, enabling production teams to refocus on output rather than extended maintenance tasks. The component’s design therefore supports efficient workshop routines and predictable service scheduling. Better end-product quality and cleaner operation Sharp, well-matched knives create uniform fragments or pellets, which improves downstream processes such as sieving, drying or re-extrusion. The practical result is consistent pellet size with fewer fines and reduced dust generation, helping to maintain housekeeping standards and minimise material loss. In recycling contexts where material quality affects recyclate value, the right blade geometry and material pairing translate into improved regranulate performance and fewer rejects. The result is a direct improvement in process economics and a smaller environmental footprint through reduced waste. Contact Metav Werkzeuge today to specify the suitable blade for your GALA system and secure a reliable supply of MetavCUT replacement knives Technical data Article number: GALA--40.6x32.4x3.6/2.1-13207-EW9Co10 Description: Recycling knife / Granulator blade 40.6 x 32.4 x 3.6/2.1 for GALA machines made from 1.3207 EW9Co10 Manufacturer: MetavCUT Core data Dimensions: 40.6 x 32.4 x 3.6/2.1 Material: 1.3207 EW9Co10 SKU: GALA--40.6x32.4x3.6/2.1-13207-EW9Co10 Special features Suitable for GALA recycling, shredding and pelletiser systems Application: shredding of plastic waste and granulating for pellet production Designed for productive, long-life operation with consistent cutting results Engineered to reduce dust and fines generation in material handling FAQ Is this blade compatible with my GALA shredder or granulator? Yes. The recycling knife is made to the specified 40.6 x 32.4 x 3.6/2.1 dimensions and is compatible with GALA machines; confirm model and mounting details when ordering the SKU GALA--40.6x32.4x3.6/2.1-13207-EW9Co10. What are the advantages of the 1.3207 EW9Co10 material? The 1.3207 EW9Co10 grade offers a balance of wear resistance and toughness that maintains cutting edge integrity under abrasive conditions, supporting longer service intervals and reliable cutting quality for granulation and shredding tasks. Which applications is this blade intended for? Primarily for recycling lines: shredders, cutting mills and granulators where plastic waste, film, sprues or plate material must be reduced to a manageable or pelletised form for reprocessing. How does the blade affect pellet quality and dust generation? A precision-ground geometry and suitable material pairing promote consistent pellet size and minimise fines, which lowers dust generation and improves downstream handling and product value. Can this blade be used as a direct replacement for original parts? The component is produced for compatibility with GALA systems and is intended as a fit-for-purpose substitute; verify mounting and tolerance details against the original specification before installation. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40.6 x 32.4 x 3.6/2.1 Mm Granulator Knife For GALA Machines, M2 1.3343 DMo5 - MetavCUT
Take advantage of precise cutting, high wear resistance and a tailored fit for GALA machines to maintain steady pellet quality and reduce unplanned downtime. Order the recommended replacement knife directly via Metav Werkzeuge or consult our specialists for installation and compatibility advice. MetavCUT granulator and shredder knife — 40.6 x 32.4 x 3.6/2.1 mm, M2 (1.3343 / DMo5) high-speed steel The MetavCUT granulator and shredder knife designed for heavy-duty recycling applications, providing a precise cutting edge and dependable performance in GALA shredders and pelletisers. M2 high-speed steel for sustained edge retention Precision fit for GALA shredders and granulators Dimensions 40.6 x 32.4 x 3.6/2.1 mm Low dust, consistent granulate quality Consistent granulate quality through precise cutting A sharp, accurately ground cutting edge is the primary factor for uniform pellet size and reduced fines. Manufactured from M2 (1.3343 / DMo5) high-speed steel, this blade delivers sustained edge retention under continuous operation. The even knife geometry minimises material smearing and thermal build-up, which supports a stable extrusion and granulation process and results in consistent granulate that simplifies downstream processing and recycling quality control. Built for continuous production and low maintenance The blade geometry and material choice aim to extend service intervals and simplify maintenance. High-speed steel provides a balance between hardness and toughness, offering wear resistance while remaining suitable for straightforward regrinding where required. Using a correctly profiled spare blade reduces vibration and bearing load in the rotor assembly, helping to protect the machine and to avoid costly unscheduled stops—factors that improve overall equipment effectiveness and operational economy. Compatibility reduces setup time and rejects Delivered in the exact dimensions stated, the knife ensures a precision fit with GALA shredders, granulators and pelletising systems, cutting installation time and the need for adaptations. A good fit contributes to consistent knife-to-knife clearance, which is crucial for low dust generation and minimal edge damage. This fit is particularly beneficial in mixed-plastic handling where a steady cut profile reduces variation in melt flow and improves the downstream pellet appearance. Designed for recycling operations and easier logistics As a purpose-made wear part for recycling plants, this cutter supports the robust demands of processing films, pipes, sprues and other production offcuts. The material and manufacturing quality aim to reduce frequency of part changes and to maintain throughput. With MetavCUT wear parts, supply chain reliability is complemented by technical know-how from Metav Werkzeuge in Emmerich, ensuring that replacement components are process-optimised, dimensionally accurate and intended for productive use. With our MetavCUT brand, an economical alternative to original manufacturer parts is provided: process-optimised wear parts that are precise, durable and developed specifically for productive application. Contact Metav Werkzeuge for further information on MetavCUT spare knives for GALA machines and to check fitment details; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: GALA--40.6x32.4x3.6/2.1-M2-13343-DMo5 Product name: Granulator / shredder knife 40.6 x 32.4 x 3.6/2.1 mm Brand: MetavCUT Specifications Dimensions: 40.6 x 32.4 x 3.6/2.1 mm Material: M2 (1.3343 / DMo5) high-speed steel Special features Suitable for GALA recycling, shredding and pelletising machines Intended application: reduction of plastics to processable size; pellet cutting after extrusion Process-optimised wear part for industrial recycling plants Aim: consistent granulate quality and reduced dust generation FAQ What machines is this knife compatible with? This MetavCUT granulator and shredder knife is compatible with GALA recycling, shredding and pelletising machines and is supplied in the stated dimension set for direct replacement. What material is the blade made from and why is it used? The blade is made from M2 (1.3343 / DMo5) high-speed steel; this material offers a balance of hardness and toughness that supports sustained edge retention and reliable performance in continuous recycling operations. Can the blade be reground or resharpened? Yes, the M2 high-speed steel construction allows for professional regrinding to extend service life while maintaining the original cutting geometry. What operational benefits does a precision-fit knife offer? A precision-fit knife ensures optimal clearance in the rotor assembly, leading to lower dust, improved pellet uniformity and reduced mechanical stress on the machine. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 8.16 x 3.6 Granulator Knife For GALA Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of high-cobalt alloy durability and precision-ground dimensions for consistent pellet quality and reduced downtime; order the replacement granulator knife directly via Metav Werkzeuge or ask our consultants if needed. Granulator knife 40.6 x 8.16 x 3.6 — MetavCUT recycling knife in 1.3207 EW9Co10 The Granulator knife 40.6 x 8.16 x 3.6 is a replacement cutting blade for GALA recycling and pelletising equipment, engineered to restore sharp, uniform cutting performance in industrial granulators and shredders. Made from high-cobalt 1.3207 EW9Co10 Precision ground 40.6×8.16×3.6 mm Compatible with GALA shredders and granulators Sharp edge for uniform pellets and low dust Consistent cuts that keep production running The blade is manufactured from 1.3207 EW9Co10, a high-cobalt steel grade chosen for its wear resistance and edge retention under continuous operation. This material maintains a sharp cutting edge over longer service intervals, which directly translates into fewer stoppages for regrinding and a steadier pellet size distribution. The precision-ground geometry ensures repeatable contact with the counterblade, improving throughput consistency and lowering the rate of fines and dust generated during processing. Designed for compatibility and straightforward replacement Built to the exact 40.6 x 8.16 x 3.6 mm specification, the replacement knife fits GALA recycling, shredding and pelletising systems without extensive modification. In practical terms, granulator knives are used to slice molten or solid polymer strands into pellets, while shredding knives reduce bulky waste into manageable pieces; this component is intended for both roles where the machine accepts this dimension and mounting. The clearly defined dimensions and factory tolerances aid quick installation and ensure the cutter seats correctly against the counterblade for reliable operation. Operational benefits and supply reliability A precise blade geometry combined with robust material reduces the frequency of blade changes and the total cost of ownership through extended service life and improved product quality. When supplied as a MetavCUT replacement part, the component is a process-optimised wear part designed for productive industrial use, backed by consistent stock handling in Emmerich to minimise lead times. Replacement planning is simpler with a maintained parts specification, and the reduced dust generation supports cleaner plant environments and lower filter maintenance. Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Contact Metav Werkzeuge for MetavCUT replacement knives in Emmerich — for advice, availability or order placement call +49 2822 7131930 or email info@metav-werkzeuge.com and secure reliable supply and expert consultation Technical data Article number: GALA--40.6x8.16x3.6-13207-EW9Co10 Product: Recycling knife / granulator knife 40.6 x 8.16 x 3.6 for GALA machines Brand: MetavCUT Facts Dimensions: 40.6 x 8.16 x 3.6 mm Material grade: 1.3207 EW9Co10 SKU: GALA--40.6x8.16x3.6-13207-EW9Co10 Special features Compatible with GALA recycling, shredding and pelletising systems Application: cutting plastics, sprues, films, pipes and sheets Precision ground for consistent pellet quality and reduced dust FAQ What materials can this blade process? The MetavCUT granulator knife made from 1.3207 EW9Co10 is suitable for processing a wide range of plastics as used in GALA recycling and granulating applications, including films, pipes, plates and sprues. How does the material grade affect service life? The 1.3207 EW9Co10 high-cobalt steel offers enhanced wear resistance and edge retention compared with standard tool steels, which helps the granulator knife maintain cutting performance for longer and reduces regrinding intervals. Is this knife a direct replacement for GALA machines? The product is manufactured to the stated dimensions to match GALA shredders and granulators; compatibility should be confirmed against the machine’s parts list or by consulting Metav Werkzeuge with the SKU GALA--40.6x8.16x3.6-13207-EW9Co10. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6 x 8.16 x 3.6 Granulator/Shredder Knife M2 1.3343 DMo5 – MetavCUT
Take advantage of a precision-engineered replacement blade that combines proven M2 (1.3343) HSS metallurgy with exact 40.6 x 8.16 x 3.6 mm dimensions for consistent cutting performance and minimal dust generation; order the MetavCUT part directly via Metav Werkzeuge or consult our specialists for compatibility advice. MetavCUT granulator knife 40.6 x 8.16 x 3.6 mm – M2 (1.3343) HSS MetavCUT granulator knife 40.6 x 8.16 x 3.6 mm designed for robust shredding and granulating tasks in GALA recycling systems, providing reliable, wear‑resistant cutting for production environments Solid HSS M2 (1.3343) construction Exact 40.6 x 8.16 x 3.6 mm dimensions Compatible with GALA recycling equipment Process‑optimised for consistent pellet quality Consistent pellet quality through optimised cutting geometry The blade is made from M2 (1.3343) high‑speed steel (HSS), a material chosen for its balance of hardness and toughness, which supports a stable cutting edge under continuous load. In granulation and shredding, a sharp, well‑ground edge reduces fines and variation in particle size; this results in a more uniform regranulate and lower downstream filtration or sieving effort. The combination of material and finish is intended to produce clean cuts, minimise thermal damage to polymers and reduce dust formation, which in turn preserves melt quality and simplifies reprocessing steps. Reliable fit and quick replacement to reduce downtime Manufactured to the precise 40.6 x 8.16 x 3.6 mm specification, the knife enables fast, repeatable installation in GALA machines without additional machining. The exact dimensions and consistent tolerances mean that set‑up and balancing routines can be completed faster, so the line returns to rated throughput more quickly. Compatibility with GALA recycling and granulator units is a defining feature of this replacement part; the MetavCUT design focuses on straightforward fitment and reliable engagement with existing tool holders, supporting stable operation and lower mean time to repair. Designed for heavy use in recycling and granulation These blades are intended as central wear parts for shredders, cutting mills and pelletisers where plastics such as film, sprues, pipes and plates are processed. The geometry and HSS composition are tailored to withstand repetitive shear and impact forces encountered in primary size reduction and post‑extrusion pelletising. Where thermal stress or abrasion are factors, the choice of M2 (1.3343) improves resistance to edge degradation while maintaining the toughness necessary to avoid premature chipping, helping to keep production runs uninterrupted and product quality constant. Practical benefits: maintenance, handling and process optimisation Using a standardised, process‑optimised replacement blade simplifies spare management and inventory planning. The robust construction supports extended service intervals, and the predictable wear behaviour of M2 (1.3343) HSS allows maintenance schedules to be based on measured runtime rather than estimates. For operations aiming to raise yield and reduce waste, switching to a precisely made replacement part can lower the incidence of reject material and improve overall process efficiency. MetavCUT wear parts are designed to be a functional, durable option for productive industrial environments. Discuss MetavCUT replacement knives with Metav Werkzeuge to ensure optimal compatibility with GALA systems—contact info@metav-werkzeuge.com or call +49 2822 7131930 for availability and technical clarification Technical data SKU: GALA--40.6x8.16x3.6-M2-13343-DMo5 Material: M2 (1.3343) DMo5 (HSS) Dimensions: 40.6 x 8.16 x 3.6 mm Brand: MetavCUT Core specifications Length: 40.6 mm Width: 8.16 mm Thickness: 3.6 mm Applications & features Use in shredders, cutting mills and granulators Suitable for GALA recycling and pelletising machines Process‑optimised wear part for consistent pellet quality Designed to reduce dust and fines during cutting FAQ What materials can this blade process effectively? The MetavCUT granulator knife (SKU GALA--40.6x8.16x3.6-M2-13343-DMo5) is intended for size reduction of typical plastics encountered in recycling operations, including film, sprues and rigid components, where HSS knives deliver reliable cutting performance. Is this knife a direct replacement for the original GALA part? Yes, the knife is manufactured to the exact 40.6 x 8.16 x 3.6 mm specification to fit GALA machines as a drop‑in replacement, enabling quick exchange without additional modifications. How does the M2 (1.3343) material affect service life? The use of M2 (1.3343) HSS gives a balance of hardness and toughness that extends edge life under abrasive and impact conditions typical for recycling and granulating, resulting in predictable wear and fewer unscheduled changes. Will the blade reduce dust and fines compared with worn cutters? A correctly resharpened or new, precisely ground MetavCUT blade improves cut quality and particle uniformity, which commonly reduces dust and fines compared with degraded cutting edges. Can the blade be reground or resharpened? Yes, the M2 (1.3343) high‑speed steel composition is suitable for regrounding; follow established shop procedures to restore the correct cutting geometry and edge condition. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With MetavCUT, Metav provides an economical alternative to original manufacturer parts: the process‑optimised wear parts fit precisely, offer extended service life and are engineered specifically for productive, industrial use.
40.6 x 8.16 x 3.6/2.1 Granulator Knife For GALA Machines M2 1.3343 DMo5 - MetavCUT
Achieve consistent pellet quality and reduced downtime by combining wear-resistant M2 (1.3343 DMo5) steel with precise 40.6 x 8.16 x 3.6/2.1 mm dimensions. Order the granulator knives directly via Metav Werkzeuge or consult our specialists for compatibility and installation guidance. Shredding Knife / Granulator Blade 40.6 x 8.16 x 3.6/2.1 (M2 1.3343 DMo5) for GALA machines — MetavCUT A Shredding Knife / Granulator Blade 40.6 x 8.16 x 3.6/2.1 engineered to reduce plastic waste and produce uniform pellets in GALA recycling and granulation systems. High wear resistance from M2 tool steel Precision ground cutting edge for uniform pellets Compatible with GALA shredders and granulators Lower dust generation and stable cutting quality Built to keep production moving with fewer interruptions The blade is manufactured from M2 1.3343 DMo5, a proven high-speed tool steel chosen for its combination of hardness and thermal stability. Installed as a shredding or granulating component in recycling lines, this knife preserves cutting geometry over extended runs, which helps to maintain a consistent particle size and reduces the frequency of unscheduled changeovers. The specified dimensions — 40.6 x 8.16 x 3.6/2.1 mm — ensure a precise fit in compatible GALA machine assemblies, supporting steady machine performance and predictable maintenance intervals. Cleaner output and more consistent pellets for downstream processing A sharp, accurately ground cutting edge minimises fibre pull and fines, improving the quality of reprocessed material and simplifying subsequent washing or extrusion steps. In granulation processes, blade geometry directly affects melt homogeneity and pellet shape; optimised cutters such as this one contribute to uniform pellet lengths and lower dust content. For operators and material planners, that translates into fewer rejects, easier sieving, and more reliable downstream throughput. A practical, process‑optimised alternative to OEM parts Produced under the MetavCUT brand as a tailored wear part, the blade offers a cost-effective replacement to original-equipment components while maintaining fit and function. These process-optimised knives are precision-made for productive use in industrial environments, giving workshops and recycling facilities a durable solution that aligns with established maintenance cycles. Where supply reliability is critical, the availability of such alternatives can simplify procurement and reduce machine idle time. What to consider when specifying replacement knives Confirm compatibility with the target granulator or shredder model and check that the blade thickness stack-up (3.6/2.1 mm section) matches the holder configuration used by the GALA machine. While the material designation M2 (1.3343 DMo5) indicates high-speed steel suited to wear-intensive cutting, blade life will depend on processed material, contamination levels and operating parameters. For bespoke advice on lining up blade geometry with throughput targets, the Metav Werkzeuge team can provide application-focused guidance. For reliable supply and tailored advice on MetavCUT granulator blades, contact Metav Werkzeuge for fast delivery from Emmerich and precise compatibility support. Technical data Article number: GALA--40.6x8.16x3.6/2.1-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40.6 x 8.16 x 3.6/2.1 für GALA Maschinen aus M2 1.3343 DMo5 Brand: MetavCUT Facts Dimensions (mm): 40.6 x 8.16 x 3.6/2.1 Material grade: M2 1.3343 DMo5 SKU: GALA--40.6x8.16x3.6/2.1-M2-13343-DMo5 Special features Application: Recycling shredders, granulators and pelletising systems Compatibility: Designed for GALA machines Function: Wear part for material size reduction and pellet cutting FAQ What materials can be processed with this blade? The knife is intended for use in plastic recycling and granulation; installed in shredders and granulators it processes typical plastic waste streams to generate regrind or pellets. Is this product compatible with my GALA machine model? Compatibility depends on the machine's knife holder and thickness configuration; provide the machine model and holder details and the Metav Werkzeuge team will confirm fit for this MetavCUT granulator blade (SKU GALA--40.6x8.16x3.6/2.1-M2-13343-DMo5). How does M2 (1.3343 DMo5) affect blade life? M2 tool steel offers a balance of hardness and heat resistance that supports longer cutting life under typical shredding and granulating conditions; actual life depends on material contamination and operating parameters. Can these knives match OEM cutting performance? MetavCUT knives are process-optimised to match the functional requirements of OEM parts, offering precise fit and cutting geometry for productive industrial use. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts under our MetavCUT brand: our process‑optimised wear parts are precisely fitting, durable and developed specifically for productive, industrial use.
40.6 x 8.16 x 3.6/2.1 Granulator Knife For GALA Machines, High-Alloy EW9Co10 1.3207 - MetavCUT
Take advantage of a durable 1.3207 EW9Co10 construction and precise 40.6 x 8.16 x 3.6/2.1 dimensions to maintain steady throughput in recycling processes; the blade is optimised for reliable fitment in GALA equipment. Order replacement knives directly via Metav Werkzeuge for consistent supply and expert advice. GALA 40.6 x 8.16 x 3.6/2.1 Shredding and Granulator Knife by MetavCUT — 1.3207 EW9Co10 A GALA 40.6 x 8.16 x 3.6/2.1 shredding and granulator knife designed for use in GALA recycling and granulation systems, produced from 1.3207 EW9Co10 tool steel 1.3207 EW9Co10 high-cobalt tool steel Precise fit for GALA shredders and granulators Sharp edges for uniform pellets and low dust Extended service life for continuous production Manufactured from 1.3207 EW9Co10, this replacement blade is engineered for wear resistance and prolonged performance in intensive recycling applications. The alloy composition supports stable cutting geometry under repeated stress, which reduces the frequency of replacements and helps to keep production windows open. As a result, downtime caused by blade wear is curtailed and maintenance intervals can be planned more predictably, supporting a more efficient production rhythm. Consistent output quality and lower process waste The defined dimensions 40.6 x 8.16 x 3.6/2.1 and precisely ground cutting edges contribute directly to uniform pellet size and reduced fines. A consistent cut reduces downstream sieving and reprocessing, while lower dust generation improves housekeeping and filter life. This technical consistency translates into measurable gains in product quality and lowers the total cost of ownership by limiting material loss and cutting-related process disruptions. Precision compatibility and straightforward replacement Designed as a direct replacement for original blades in GALA equipment, the knife offers a precision fit that shortens changeover time and simplifies installation. Each blade is produced to match the original mounting and tolerance specifications, which helps to preserve machine alignment and cutter geometry. For operators seeking predictable machine behaviour and minimal set-up adjustments, such compatibility reduces the effort required during service interventions and keeps the line running reliably. Contact Metav Werkzeuge today to secure MetavCUT replacement knives made from 1.3207 EW9Co10 and maintain uninterrupted recycling production with expert supply and advice from Emmerich Technical data Article number: GALA--40.6x8.16x3.6/2.1-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 40.6 x 8.16 x 3.6/2.1 für GALA Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40.6 x 8.16 x 3.6/2.1 Facts SKU: GALA--40.6x8.16x3.6/2.1-13207-EW9Co10 Suitable for: Recycling and granulation systems by GALA Application: Shredders, granulators, pelletisers Special features Wear part optimised for recycling processes Ground cutting edges for uniform pellets Direct replacement for GALA machinery Process-oriented production for consistent quality FAQ Is this blade compatible with GALA shredders and granulators? This shredding and granulator knife is specified for use with GALA recycling and granulation equipment and is produced to match the original mounting and tolerance requirements. What benefits does the 1.3207 EW9Co10 material provide? The 1.3207 EW9Co10 tool steel used in the MetavCUT knife increases wear resistance and helps to maintain cutting geometry over prolonged operation, reducing replacement frequency. How do the knife dimensions affect pellet quality? The precise dimensions 40.6 x 8.16 x 3.6/2.1 ensure consistent clearance and edge geometry, which supports uniform pellet size and lowers dust and fines during granulation. Can the blade be installed without machine adjustments? The MetavCUT replacement knife is manufactured for a direct fit in GALA machines, minimising the need for additional alignment and shortening changeover time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts under our MetavCUT brand: our process-optimised wear parts are precisely matched, durable and designed for productive use.
40.6x16.5x3.6/2 Granulator Knife For GALA Recycling Machines, M2 1.3343 (DMo5) - MetavCUT
Take advantage of the combination of high-performance M2 (1.3343 / DMo5) tool steel, precise 40.6 x 16.5 x 3.6/2 dimensions and a fit designed for GALA recycling equipment to maintain consistent pellet quality and minimise downtime; order the spare blade directly via Metav Werkzeuge or ask our consultants if needed. GALA Granulator/Shredder Blade 40.6 x 16.5 x 3.6/2 — M2 (1.3343 / DMo5) by MetavCUT GALA Granulator/Shredder Blade 40.6 x 16.5 x 3.6/2 — M2 (1.3343 / DMo5) is a wear part engineered for granulating and shredding tasks in GALA recycling and pelletising machines, offering precision fit and reliable cutting performance High-performance M2 tool steel Precise 40.6×16.5×3.6/2 dimension fit For GALA recycling and granulating machines Ensures uniform pellets and low dust Maximise uptime with a blade built for continuous production Constructed from M2 (1.3343 / DMo5) high-speed tool steel, this granulator blade combines hardness with toughness to resist abrasive wear in demanding recycling processes. Hardness and edge retention characteristics of this grade support prolonged cutting intervals, which translates into fewer changeovers and less scheduled downtime. The precise dimensions 40.6 x 16.5 x 3.6/2 ensure a secure seat in the cutter block, reducing vibration and maintaining cutting geometry over time. For production planners and maintenance engineers, this means predictable servicing intervals and a steady material flow. Consistent output quality and cleaner processing A sharp, correctly seated cutting edge is crucial for homogenous particle size and reduced fines. The blade's geometry and grade help produce uniform pellets and minimise dust generation, improving downstream handling and reducing the load on filtration and extraction systems. In extrusion and regranulation lines, homogeneity in pellet size supports consistent melt behaviour and part quality. Specifying a blade that prioritises repeatable cut quality therefore contributes directly to process stability and product yield. Simple replacement logic and cost-effective stocking Standardised dimensions and compatibility with GALA equipment simplify spare-part logistics and stocking strategies. The repeatable fit reduces installation time and the risk of improper assembly, which in turn lowers the probability of incidental machine damage. Choosing robust wear parts allows a more economic lifecycle approach: fewer blade purchases over time and reduced labour costs for replacements. MetavCUT parts are positioned as a pragmatic alternative to original-equipment consumables, designed for productive environments where reliability and value are essential. MetavCUT: an economic alternative for productive operations MetavCUT offers a pragmatic, production-oriented alternative to original manufacturer parts. The brand’s process-optimised wear components are designed for a secure fit, extended service life and dependable performance in industrial recycling applications. This approach supports workshops and recyclers seeking durable replacements without compromising on compatibility or operational safety. We provide a practical alternative to OEM parts Our MetavCUT range supplies a cost-effective substitute to manufacturer original parts: the process-optimised wear parts are precisely matched, long-lasting and developed explicitly for demanding, productive use. Choose MetavCUT blades for consistent pellet quality and reliable uptime; contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: GALA--40.6x16.5x3.6/2-M2-13343-DMo5 Description: Granulator / shredder blade Material: M2 (1.3343 / DMo5) Dimensions: 40.6 x 16.5 x 3.6/2 Manufacturer: MetavCUT UID: GALA--40.6x16.5x3.6/2-M2-13343-DMo5 Core specifications Dimensions: 40.6 x 16.5 x 3.6/2 Material grade: M2 (1.3343 / DMo5) SKU: GALA--40.6x16.5x3.6/2-M2-13343-DMo5 Applications & features For GALA recycling, shredding and pelletising machines Suited to processing plastic scrap, sprues, films, pipes and plates Wear part designed for long edge life and predictable change intervals Promotes uniform pellet size and reduced dust generation Brand: MetavCUT FAQ What machines is this blade compatible with? The blade is specified for use in GALA recycling, shredding and pelletising machines and is manufactured to the exact 40.6 x 16.5 x 3.6/2 fit required by those systems. What is the material and why does it matter? Made from M2 (1.3343 / DMo5) high-speed tool steel, the blade offers a balance of hardness and toughness that improves edge retention and reduces wear in abrasive recycling applications. How does this blade affect pellet quality? A correctly sized and sharp blade produces uniform pellets and lowers dust levels, supporting better downstream melt stability and fewer processing issues. How often should the blade be replaced? Replacement intervals depend on processed material and operating conditions; the grade and precision fit reduce variability and make wear predictable for maintenance planning. Is this a genuine OEM part? This blade is supplied under the MetavCUT brand as a cost-effective, process-optimised alternative to original equipment consumables while ensuring fit and performance in GALA machines. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.6x20.6x3.6 Granulator/Chipper Knife M2 (1.3343 DMo5) For GALA Machines - MetavCUT
High-performance M2 construction and an exact fit deliver consistent pellet quality and extended service life; reliable cutting and reduced dust contribute to steady plant throughput. Order the replacement blade directly via Metav Werkzeuge or consult the specialists for compatibility and delivery options. Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6 – Granulator knife in HSS M2 by MetavCUT Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6 is a precision granulator blade designed for GALA recycling and granulation equipment, offering robust cutting performance in continuous production environments Precision HSS M2 construction for extended life Exact fit for GALA shredders and granulators Consistent pellet quality with low dust formation Optimised for productive, continuous operation Maximised uptime through precision material and design The blade is forged from M2 (1.3343 / DMo5) high-speed steel, a grade chosen for its hardness and heat resistance under demanding cutting conditions. This M2 composition supports sustained sharpness and wear resistance during continuous operation, which in turn reduces the frequency of changes and machine downtime. The specified dimensions 40.6 x 20.6 x 3.6 ensure a predictable contact geometry with the counter blade, contributing to a uniform cutting gap and therefore stable pellet quality. For procurement planning, the combination of material and geometry translates into fewer interruptions and more consistent throughput on the production line. Clean cuts and process benefits derived from accurate fit A blade that matches the original equipment's mounting points and tolerances preserves the kinematics of the rotor and stator, improving cut consistency and lowering fines and dust. The MetavCUT granulator blade has been manufactured with tight tolerances to match GALA machines, enabling even shear forces and minimised vibration. The result is an improved downstream process, where fewer thin particles and a homogeneous granulate size simplify sieving and reprocessing. This measurable improvement in process stability supports a higher yield of saleable regranulate and reduces the need for corrective sorting. Application suitability and handling guidance Designed for use in shredders, cutting mills and pelletisers, the blade is suitable for the reduction of various plastic waste forms such as film, tubes, sprues and plates within recycling operations. Its robust HSS composition is intended for standard recycling feeds and continuous operation; however, material-specific concerns (for example, heavy metal fillers or abrasive glass fibre content) can accelerate wear. For installation, ensure the cutting gap is checked after fitting and that blades are mounted following the equipment manufacturer's torque specifications. Regular monitoring of the cutting edge and scheduled sharpening cycles maintain optimal performance and avoid process surprises. MetavCUT provides an economical alternative to original manufacturer parts: process-optimised wear parts are precisely matched, durable and designed for productive use. Contact Metav Werkzeuge for exact replacement recommendations for MetavCUT granulator knives and guidance on compatibility with GALA systems; experts at our Emmerich site will advise on delivery and fitment. Technical data Article number: GALA--40.6x20.6x3.6-M2-13343-DMo5 Designation: Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6 Brand: MetavCUT Facts Dimensions (L x W x T): 40.6 x 20.6 x 3.6 mm Material: M2 (1.3343 / DMo5) Special features Compatible with GALA recycling and granulation equipment Intended for shredders, cutting mills and granulators Process-optimised geometry for low dust and uniform granulate Wear part designed for productive, continuous use FAQ What material is used for the blade and why is it chosen? The blade is manufactured from M2 (1.3343 / DMo5) high-speed steel; this grade provides a balance of hardness and heat resistance suited to continuous cutting tasks typical in granulators and shredders. Is this blade compatible with GALA machines? Yes, the Zerkleinerungsmesser / Granuliermesser 40.6 x 20.6 x 3.6 is produced to fit GALA recycling and granulation systems and is specified to match mounting and clearance requirements for those machines. What improvements in process quality can be expected after fitting this blade? Fitting a precisely matched MetavCUT blade reduces dust and fines, produces more uniform pellets and stabilises throughput, which simplifies downstream sorting and increases usable regranulate yield. Can this blade handle abrasive or fibre-reinforced plastics? The blade is suitable for general recycling feeds; however, highly abrasive fillers or significant glass-fibre content will increase wear rates and may require more frequent sharpening or a specialised grade. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reduce downtime with precise GALA spare parts for shredders, granulators and other size‑reduction equipment
The range of GALA spare parts for shredders, granulators and other size‑reduction equipment from METAV is a process‑optimised alternative to original manufacturer components: passgenau, long‑lasting and economical. Also described as GALA replacement parts for granulators or GALA wear parts for shredders, these METAV tools are engineered to sustain continuous pelletising and recycling workflows.
Keep pellet quality and throughput stable in demanding production lines
GALA, a brand of the MAAG Group, is known for underwater pelletising systems and centrifuge dryers used in plastics and polymer processing. In compounding, masterbatch production and recycling applications, the melt stream after extrusion and filtration is turned into uniform pellets or regranulate; consistent cutting and screening are therefore essential. METAV supplies process‑optimised components tailored for these tasks, including knives, perforated plates, cutter heads, cutting chambers, process water technology, filters, sieves, seals and drying components. These parts are intended for use on shredders, granulators and other size‑reduction equipment where reliable material flow and pellet geometry matter.
What tangible benefits these components deliver on the shop floor
- Improved uptime through durable knives and wear parts designed for extended service life.
- Faster retooling and reduced set‑up time with precise fit and repeatable tolerances.
- Stable pellet quality thanks to matched perforated plates and cutter heads that control flake and pellet size distribution.
- Process reliability supported by robust filters and drying components that reduce contamination and moisture variability.
- Cost efficiency by replacing multiple short‑lived items less frequently and lowering total cost of ownership.
Why Metav is the convenient partner for GALA replacement parts
Metav stands for the democratisation of precision, combining decades of expertise with a broad, reliable assortment. From Emmerich on the Rhine we act as a quality filter for the European market: more than 48,000 customers trust our selection, and our catalogue covers over 250,000 products for industry and trade. While MAAG Group’s GALA equipment represents OEM quality, the METAV range—labelled as GALA replacement parts for granulators—offers process‑optimised, cost‑effective alternatives that are carefully matched to field requirements.
Short summary
For operations that depend on steady pelletising and efficient size reduction, GALA spare parts for shredders, granulators and other size‑reduction equipment deliver measurable reliability and simplified maintenance through engineered METAV components.
FAQ
Which components are included in the GALA spare parts range?
The GALA spare parts for shredders, granulators and other size‑reduction equipment include knives, perforated plates, cutter heads, cutting chambers, process water technology, filters, sieves, seals and drying components, all specified for pelletising and recycling applications.
Are METAV parts genuine GALA components?
METAV supplies process‑optimised parts branded as GALA replacement parts for granulators; they are not original manufacturer items but are manufactured to fit and perform in GALA systems used for underwater pelletising and centrifuge drying.
How do METAV replacement parts affect pellet quality?
Using correctly matched perforated plates and cutter heads from the GALA spare parts for shredders, granulators and other size‑reduction equipment stabilises pellet geometry and reduces fines, thereby improving downstream handling and product consistency.
Can these parts be used across GALA machine types?
METAV designs its GALA wear parts for shredders to suit the typical configurations found in GALA/MAAG Group pelletising and centrifuge dryer units; compatibility should be checked against machine specifications and part references before ordering.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com