30mm x 20mm x 20mm Horseshoe Magnet AlNiCo 500 45N Holding Force, 5.2mm Bore - TECWERK
Take advantage of the compact AlNiCo 500 construction and 45 N holding force for reliable fixture and positioning tasks; the compact dimensions and 5.2 mm mounting hole enable quick integration into confined assemblies. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Horseshoe magnet L30 x 20 x 20 mm – AlNiCo 500, 45 N holding force (TECWERK) A horseshoe magnet L30 x 20 x 20 mm engineered for precise holding and positioning in workshop jigs, assembly fixtures and light industrial applications. Strong 45 N holding force for reliable fixing Compact dimensions 30 x 20 x 20 mm for tight spaces 5.2 mm mounting hole for secure attachment Reliable holding where space is limited The compact cast of this magnet combines a low installation footprint with a measurable holding force of 45 N, making it suitable for small jigs, temporary fixturing and component retention. The small overall size 30 x 20 x 20 mm minimises intrusion into assemblies and allows integration where larger magnets would be impractical. The clear numerical specification of the hold gives planners and technicians a predictable basis for fixture design, reducing trial-and-error during assembly layout and improving throughput in repetitive tasks. Simple, durable mounting and installation A dedicated 5.2 mm mounting hole provides a standardised fixing point for screws or studs, speeding up installation and ensuring repeatable alignment in production setups. The presence of a defined mounting aperture means the magnet can be anchored securely without bespoke adaptors, which shortens setup time and lowers the complexity of retrofits. The data also shows a lacquer curing temperature of 200 °C, which is relevant when the part is exposed to elevated temperatures during assembly processes that include painted or baked components. High-temperature capability and material clarity Constructed from AlNiCo 500, this magnet features a specified maximum operating temperature of 450 °C, allowing use in hotter environments where standard ferrite magnets would lose performance. That rated temperature provides a clear technical advantage for fixtures exposed to heat or for processes that include thermal steps. The explicit material listing and temperature figures help maintenance and design teams choose the correct magnetic solution without ambiguity, supporting long-term reliability in demanding conditions. Practical benefits for workshop and light industrial use Compact size, measurable holding force and a standardised mounting option translate into tangible savings in assembly time and fixture complexity. Where repeatable positioning and easy replacement are priorities, the physical specifications make decisions straightforward: planners can calculate expected retention, fit the magnet with standard fasteners and plan for thermal exposure up to the stated limit. The product’s concise technical data supports procurement and inventory decisions and reduces the need for specialist conversion parts. For temperature-critical fixtures or compact retention needs, consider the TECWERK horseshoe magnet and contact Metav Werkzeuge for tailored advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise application support Technical Data Article number: 4000832261NW SKU: 4000832261NW Brand: TECWERK Product type: Horseshoe magnet Facts Dimensions: 30 x 20 x 20 mm Holding force: 45 N Mounting hole diameter: 5.2 mm Maximum operating temperature: 450 °C Lacquer curing temperature: 200 °C Packaging unit: 1 Special features Material: AlNiCo 500 Compact horseshoe design Suitable for high-temperature applications Standardised mounting hole for simple fixing FAQ What is the holding capacity of this magnet? The magnet provides a holding force of 45 N, specified for the TECWERK horseshoe magnet (SKU 4000832261NW). Can this magnet be used in high-temperature environments? Yes. The magnet is made from AlNiCo 500 and is rated for a maximum operating temperature of 450 °C, which allows use in many elevated-temperature applications. How is the magnet mounted in an assembly? A 5.2 mm mounting hole is provided for secure attachment with standard screws or studs; the compact 30 x 20 x 20 mm form factor aids installation in confined spaces. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm x 25mm x 25mm Horseshoe Magnet AlNiCo 500 90N Holding Force, Max Temp 450°C - TECWERK
Take advantage of AlNiCo 500 construction and a 90 N holding force combined with high-temperature capability for reliable, long-term clamping; order the horseshoe magnet directly via Metav Werkzeuge or contact our specialists for application advice. Horseshoe Magnet L40×B25×H25 – AlNiCo 500, 90 N holding force (TECWERK) The horseshoe magnet L40×B25×H25 is a compact magnetic clamp for workshop and light industrial fixtures, designed for secure holding where elevated temperature resistance is required Robust AlNiCo 500 construction 90 N holding force for secure fixing 5 mm bore for mounting Rated for 450 °C continuous use Consistent, predictable magnetic performance for demanding work The magnet delivers a defined 90 N holding force, making it suitable for repetitive clamping and simple fixturing tasks where reproducible retention is important. Constructed from AlNiCo 500, the alloy combines good magnetic stability with thermal resilience; this means the magnetic properties remain more consistent at elevated temperatures than many ferrite alternatives. The specification for 450 °C maximum service temperature highlights its suitability for assemblies that are exposed to heat during processing. Where process reliability and consistent clamping are priorities, this material choice reduces the risk of performance drift and supports predictable production cycles. Space-saving dimensions and straightforward mounting With compact external dimensions of 40 x 25 x 25 mm and a central 5 mm bore, the component is engineered for easy integration into jigs, tooling plates or bespoke fixtures. The horseshoe form concentrates the magnetic field between the poles, enabling effective contact on small contact areas without excessive bulk. The through-hole offers a simple mechanical fixing option that keeps the magnet securely positioned while allowing rapid installation or replacement. For workshops optimising bench layout or retrofitting existing devices, the size and mounting design permit flexible use in restricted spaces. Durable handling and compatibility with post-processing The magnet is designed with practical workshop workflows in mind: the material and construction tolerate elevated temperatures, and the specification notes a painting temperature of 200 °C, which allows for certain finishing steps without compromising magnetic integrity. Packaged as a single unit, the item suits one-to-one replacements or small-batch assembly tasks. Applications range from holding fixtures and positioning aids to light tool retention where a compact, heat-resistant magnetic solution is required. The combination of material choice and geometry supports repeatable performance over many cycles, contributing to reduced downtime and increased process reliability. For application guidance or to reserve the TECWERK horseshoe magnet L40×B25×H25, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise technical assistance and supply information. Technical data Article number: 4000832262NW Manufacturer: TECWERK Product type: Horseshoe magnet Packaging unit: 1 Facts Dimensions: 40 x 25 x 25 mm Holding force: 90 N Bore diameter: 5 mm Max operating temperature: 450 °C Painting temperature: 200 °C Materials & features Material: AlNiCo 500 Shape: Horseshoe magnet High-temperature resistance Single-unit packaging FAQ What maximum temperature can the magnet withstand without loss of function? The magnet is specified for a maximum operating temperature of 450 °C; the TECWERK horseshoe magnet L40×B25×H25 has been produced in AlNiCo 500 to provide thermal stability at elevated temperatures. What mounting options are available for this magnet? Mounting is via the central 5 mm bore, which permits secure mechanical fixing in jigs or fixtures while maintaining the magnet’s compact footprint. Which applications are best suited to this type of magnet? Typical uses include simple clamping, positioning aids and light fixturing in workshops and production cells where compact size and thermal resistance are required. Is the product delivered as a single item or in sets? The item is supplied as a single unit (packaging unit 1); refer to article number 4000832262NW for ordering. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
45mm Horseshoe Magnet With 118N Holding Force, AlNiCo 500 Coating - TECWERK
Take advantage of a compact, high‑temperature AlNiCo 500 solution with a reliable 118 N holding force and a 5 mm mounting bore for fixed workshop fixtures; the combination of thermal resilience and precise dimensions supports consistent production workflows. Order the horseshoe magnet directly via Metav Werkzeuge or ask our consultants if needed. Horseshoe Magnet L45 x B30 x H30 mm – AlNiCo 500, 118 N holding force (TECWERK) The Horseshoe Magnet L45 x B30 x H30 mm is a compact AlNiCo retaining magnet designed for high‑temperature fixtures and secure holding tasks in workshops and production cells. AlNiCo 500 for excellent thermal stability Holding force 118 N for secure retention Compact 45 x 30 x 30 mm with 5 mm bore Consistent magnetic retention for elevated temperatures The compact U‑shaped design provides a predictable holding force of 118 N, making it suitable for repeatable positioning and short‑term retention of small components. Manufactured from AlNiCo 500, the magnet maintains magnetic performance at elevated temperatures — the specified maximum operating temperature of 450 °C ensures stability where standard ferrite magnets would demagnetise. This thermal resilience is particularly relevant for assembly jigs, brazing fixtures, or processes that expose fixtures to heat, enabling a reduction in rework and downtime through reliable clamping behaviour. Small footprint and practical mounting for fixtures With outer dimensions of 45 x 30 x 30 mm and an integrated 5 mm bore, the magnet fits into compact jigs and can be secured with standard fasteners for repeatable alignment. The hole facilitates straightforward mechanical fixing, while the compact geometry supports close‑quarter clamping without obstructing adjacent tooling. The magnet’s coating bake temperature of 200 °C indicates compatibility with common paint and coating processes, allowing it to withstand finishing steps without loss of surface integrity. Material choice and predictable lifecycle performance Constructed from AlNiCo 500, this horseshoe magnet combines good corrosion resistance and dimensional stability with sustained magnetic properties at high temperatures. The solid construction minimises deformation risks and provides a reliable magnetic anchor across numerous cycle operations. For applications requiring consistent magnetic behaviour under thermal stress, the material selection reduces the need for oversized clamps or redundant fixturing, supporting faster set‑ups and leaner workflows. For project advice on integrating the TECWERK horseshoe magnet into heat‑exposed fixtures or for assistance selecting the right AlNiCo solution, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832263NW UID: 4000832263NW Label: Hufeisenmagnet L45xB30xH30mm sta.Haftkraft 118N Facts Material: AlNiCo 500 Dimensions: 45 x 30 x 30 mm Holding force (max): 118 N Bore diameter: 5 mm Max operating temperature: 450 °C Coating bake temperature: 200 °C Special features Product type: Horseshoe magnet Brand: TECWERK Packing unit: 1 FAQ What maximum temperature can the magnet withstand? The magnet is specified for a maximum operating temperature of 450 °C, thanks to its AlNiCo 500 composition. How strong is the holding capacity in practical terms? The 118 N holding force provides secure retention for small parts and fixtures in typical workshop applications. Is the magnet ready for mechanical fastening? Yes, the integrated 5 mm bore permits mechanical attachment to jigs or mounting plates for repeatable positioning. Can the magnet tolerate common coating processes? The listed coating bake temperature of 200 °C indicates suitability for many paint and lacquer cycles without surface damage. For which tasks is this horseshoe magnet most appropriate? The magnet is intended for heat‑exposed fixtures, positioning aids and small clamping duties where a compact, thermally stable magnetic solution is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
57.2mm Horseshoe Magnet With 235N Holding Force, 7.9mm Holes - TECWERK
Take advantage of robust clamping and high-temperature stability combined with straightforward mounting for reliable jig and fixture work. The combination of AlNiCo 500 metallurgy and a 235 N holding force ensures repeatable positioning, while two 7.9 mm drilled holes permit secure attachment; order via Metav Werkzeuge or consult our specialists for application guidance. Horseshoe Magnet L57.2×B44.5×H34.9 mm – AlNiCo 500, 235 N The Horseshoe Magnet L57.2×B44.5×H34.9 mm is a compact industrial horseshoe magnet designed for secure fixturing and high-temperature environments in metalworking and assembly stations. AlNiCo 500 alloy for temperature stability Holding force 235 N for reliable clamping Two 7.9 mm drilled holes for secure mounting Consistent clamping reduces rejects and downtime The horseshoe design delivers a concentrated magnetic field that translates into a predictable holding force. With a rated 235 N, this magnet provides the mechanical stability needed for light to medium clamping tasks where repeatability matters. The AlNiCo 500 alloy maintains magnetic properties at elevated temperatures better than many ferrite magnets, so processes that produce heat benefit from fewer magnetic shifts. This results in fewer misplaced parts, less need for rework and improved process consistency—advantages that directly affect throughput and quality assurance. Built for elevated temperatures and production processes Rated for a maximum operating temperature of 450 °C, the magnet is suitable for applications where heat is present, such as near brazing, soldering or thermal treatment operations. The specified lacquering temperature of 200 °C relates to finishing and protective coatings applied during manufacturing; it indicates compatibility with common paint and lacquer processes. These thermal characteristics make the magnet a practical choice where thermal resilience is required, while still delivering dependable magnetic performance during normal production cycles. Designed for secure integration into fixtures Two precisely drilled holes with a diameter of 7.9 mm give clear options for mechanical fastening and alignment. The presence of two mounting holes simplifies repeatable installation into jigs and small fixtures and reduces the risk of lateral movement under load. The hole spacing and orientation favour stable clamping arrangements, enabling straightforward retrofitting into existing tooling or the construction of small bespoke assemblies without elaborate modification. Low-maintenance material choice and safe handling advice The magnet’s AlNiCo 500 construction offers stable magnetic behaviour and a long service life when handled correctly. Avoid hard mechanical shocks and keep the magnet free from heavy metallic debris to preserve the magnetic faces. Routine visual inspection is sufficient for most users; if the lacquered surface shows wear after thermal cycles, re-coating at or below the stated 200 °C lacquering temperature will maintain the protective finish. These straightforward care steps support dependable performance over many cycles while keeping maintenance effort to a minimum. Contact Metav Werkzeuge for tailored technical advice on integrating the TECWERK horseshoe magnet into existing fixtures and to arrange availability or a procurement consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: 4000832264NW Label: Horseshoe magnet L57.2×B44.5×H34.9 mm Manufacturer: TECWERK Numbers / Core technical data Holding force: 235 N Dimensions: 57.2 x 44.5 x 34.9 mm Maximum operating temperature: 450 °C Lacquering temperature: 200 °C Number of drilled holes: 2 Drill hole diameter: 7.9 mm Packaging unit: 1 Special features / Versions Material: AlNiCo 500 Shape: Horseshoe magnet Mounting: two drilled holes for secure attachment Application focus: fixtures, jigs, high-temperature environments FAQ What is the maximum temperature at which the magnet retains its properties? The TECWERK horseshoe magnet is specified for a maximum operating temperature of 450 °C, which reflects the thermal resilience of the AlNiCo 500 alloy used in this horseshoe magnet (SKU 4000832264NW). How strong is the magnetic hold for everyday fixture tasks? Rated at 235 N, the holding force provides reliable clamping for light to medium assembly and machining operations, delivering repeatable positioning when integrated into jigs or small fixtures. Which fasteners do the mounting holes accept? The magnet features two drilled holes with a diameter of 7.9 mm, designed to accommodate common fastening elements close to that diameter for secure mechanical attachment in tooling assemblies. Can the magnet be used near welding or heat-treatment processes? Yes; thanks to the AlNiCo 500 material and the 450 °C operating limit, the magnet is suitable for environments where moderate heat is present, though local conditions and thermal cycles should be evaluated for each application. What maintenance is recommended to keep the magnet working reliably? Routine cleaning to remove metallic debris and avoiding severe mechanical shocks are recommended; if the lacquer shows wear after heat exposure, re-coating at the stated 200 °C lacquering temperature will help preserve the finish. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com