1200-1400mm Digital Outside Micrometer With Ø50mm Anvils, IP65, ISO 17025 Calibrated - Microtech Metrology
€2,690.00
Product information "1200-1400mm Digital Outside Micrometer With Ø50mm Anvils, IP65, ISO 17025 Calibrated - Microtech Metrology"
Combining a long measuring span with IP65 protection and an ISO 17025 calibration certificate, this instrument delivers traceable, workshop-ready results for large components; benefit from precise 0.001 mm resolution and a secure friction ratchet for repeatable contact. Order the instrument directly via Metav Werkzeuge or ask the consultants for a tailored specification review.
Digital Frame Micrometer 1,200–1,400 mm — ISO 17025, IP65 by Microtech Metrology
The Digital Frame Micrometer 1,200–1,400 mm is a long-range, IP65-protected micrometer designed for dimensional control of large parts in production and toolrooms.
- ISO 17025-calibrated with certificate
- IP65-protected digital readout
- Measuring faces Ø50 mm for stable contact
- Friction ratchet and setting rods included
Precise control for large assemblies
For measurement tasks that exceed standard caliper reach, this long-range digital micrometer provides reliable resolution of 0.001 mm and a documented accuracy of ±0.02 mm, enabling reproducible results on sizeable components. The device's wide measuring span of 1,200–1,400 mm is geared towards fixture and housing inspection where consistent axial alignment and stable contact points are essential. The combination of a rigid frame and Ø50 mm contact faces reduces local deformation, so measurement uncertainty is kept low and process decisions can be made with confidence.
Built for robust everyday use
Aimed at busy workshops and production halls, the unit combines a dust- and water-resistant IP65 readout with a durable frame and a friction ratchet for uniform closing force. These features reduce operator-related variation and protect electronics from coolant and chips on the shop floor. With a substantial mass of 11 kg, the instrument sits stably during measurement sequences, and the included setting rods make zeroing and setup faster — a practical advantage when integrating checks into assembly or incoming inspection routines.
Traceability and documented quality assurance
Delivered with a full calibration certificate performed to ISO 17025 (Ilac MRA), this micrometer supports formal quality systems and audit trails. The certification confirms that the measuring chain has been verified under an accredited laboratory procedure, simplifying compliance for regulated manufacturing and metrology labs. The presence of a formal calibration certificate also streamlines internal quality records and reduces administrative overhead when establishing measurement capability studies.
Integration into daily workflows
The digital readout and robust contact geometry make this instrument straightforward to use in repetitive inspection tasks and measurement stations. With digital readout protection to IP65 and a user-friendly head unit, readings are easy to copy into inspection protocols or digital data capture systems. The micrometer is suitable for routine use where long-range, repeatable checks are required, offering a pragmatic balance of reach, stiffness and documented accuracy for quality assurance teams.
For specification advice, delivery options and on-site suitability analyses, contact Metav Werkzeuge — Metav’s specialists can review measurement requirements and arrange supply from stock or a tailored configuration.
Technical Data
- Article number: 110171401
- GTIN: 4061905040412
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 1,200–1,400 mm
- Measuring faces: Ø50 mm
- Resolution: 0.001 mm
- Accuracy: ±0.02 mm
- Weight: 11 kg
- Protection class: IP65
Special features
- Digital readout
- Friction ratchet for reproducible contact
- Setting rods included
- Calibration certificate ISO 17025 (Ilac MRA)
- Wide-range digital micrometer head
- Readout unit protected to IP65
FAQ
What measuring range does this micrometer cover?
The Digital Frame Micrometer covers a measuring range of 1,200–1,400 mm and is supplied as the wide-span solution from Microtech Metrology (SKU 110171401).
Is a calibration certificate included?
Yes, the micrometer is supplied with a calibration certificate issued to ISO 17025, providing full traceability for quality management systems.
What resolution and accuracy can be expected?
The instrument offers a resolution of 0.001 mm with an accuracy of ±0.02 mm, suitable for routine dimensional control of large components.
How does the instrument cope with workshop conditions?
The readout and head are rated IP65, protecting the electronics from dust and water jets; the large Ø50 mm faces and friction ratchet promote stable, repeatable contact under typical workshop conditions.
What is included with delivery?
Delivery includes the digital frame micrometer, the setting rods required for setup and the ISO 17025 calibration certificate.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools