12.7mm Digital Dial Indicator Absolute Display With USB, IP66, ISO 17025 Calibrated - Microtech Metrology
€129.00
Product information "12.7mm Digital Dial Indicator Absolute Display With USB, IP66, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of high-resolution measurement, rugged protection and traceable results for reliable process control; precision readings, USB data output and an ISO 17025 calibration certificate support consistent quality assurance — order through Metav Werkzeuge or consult our specialists for integration advice.
Digital dial indicator — Microtech Metrology, 0–12.7 mm, USB data output
Digital dial indicator for absolute displacement measurement in inspection, setup and quality control; compact format for precise small-travel checks in workshop and laboratory environments
- High-resolution 0.001 mm readout
- USB data output for digital logging
- IP66 splash and dust protection
Measure consistently with laboratory-grade accuracy
The compact indicator delivers a resolution of 0.001 mm and an accuracy of ±0.006 mm, enabling precise repeatability on small displacements up to 0–12.7 mm. The absolute measuring system avoids loss of position after power cycles, which simplifies set-up routines and reduces cumulative error during component inspection. For production quality control this translates into fewer scrapped parts and faster go/no-go decisions, because measurement uncertainty is minimised and traceability is maintained.
Durable design that links into modern data workflows
Designed for practical use on the shop floor, the gauge combines IP66 ingress protection with a low contact force of 0.6–1 N, so delicate surfaces are not overloaded while the unit withstands coolant splashes and dust. Measurement values appear in mm/inch on the display, with PRESET, HOLD and MODE functions for flexible inspection tasks. Data are exported via USB for direct logging into inspection software or a data-collection terminal, supporting rapid documentation of inspection results and enabling digital process control across the production line.
Calibration and fit for purpose in applied metrology
Delivered fully calibrated according to ISO 17025, the instrument includes a calibration certificate for immediate use in accredited workflows and internal audits. The unit is battery-powered by a CR2032 3V cell for simple maintenance and long shelf life; together with the absolute system and the digital interface, the instrument is suited to incoming inspection, fixture set-up and comparative measurement tasks where traceable, recorded values are required. The combination of robust protection, simple data transfer and certified calibration supports both hands-on inspection and integration into documented quality systems.
Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology digital dial indicator into existing inspection routines and to receive the ISO 17025 calibration documentation — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930
Technical data
- Article number: 120125132
- GTIN: 4061905081880
- Manufacturer: Microtech Metrology
- Category: Dial indicators
- ECLASS: 21170308
- ETIM: EC003591
Facts
- Measurement range: 0–12.7 mm
- Resolution: 0.001 mm
- Resolution (inch): 0.00005 in
- Accuracy: ±0.006 mm
- Measuring force: 0.6–1 N
- Protection class: IP66
- Power supply: CR2032 3V
Special features
- Absolute measuring system
- USB data output
- Digital display with mm/inch, PRESET, HOLD, MODE
- Delivered calibrated to ISO 17025 with calibration certificate
- Digital instrument (true)
FAQ
Is the instrument delivered calibrated?
Yes, the digital dial indicator is supplied fully calibrated to ISO 17025 and includes the calibration certificate with the delivery.
What is the measurement range and resolution?
The gauge measures from 0 to 12.7 mm with a resolution of 0.001 mm (0.00005 in) and an accuracy of ±0.006 mm.
Can this indicator be used in a production environment?
Yes, the IP66 rating and a low contact force of 0.6–1 N make the device suitable for shop-floor inspection and fixture set-up.
How are readings exported for documentation?
Values are transferred via the USB interface; the absolute measuring system ensures stable position data for reliable digital logging.
What power source does the unit use?
The indicator is powered by a CR2032 3V battery, which is user-replaceable for straightforward maintenance.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools