12.7mm Dial Indicator Digital Absolute With mm/inch Preset Hold Mode, IP67, ISO 17025 Calibrated - Microtech Metrology
€159.00
Product information "12.7mm Dial Indicator Digital Absolute With mm/inch Preset Hold Mode, IP67, ISO 17025 Calibrated - Microtech Metrology"
Compact accuracy and rugged data capture combine to support reliable inspection results: IP67 protection, USB data output and ISO 17025 calibration ensure reproducible measurements and traceability. Order the digital indicator via Metav Werkzeuge or consult our specialists for integration advice.
Microtech Metrology digital indicator – 0–12.7 mm, USB, IP67
The Microtech Metrology digital indicator is an absolute measuring instrument designed for precision inspection, small-part quality control and production spot checks.
- IP67 protection for harsh environments
- ISO 17025 calibrated with certificate included
- USB data output for simple data capture
- 0–12.7 mm range with 0.001 mm resolution
Repeatable precision where it matters most
This indicator delivers a 0–12.7 mm measuring range with a resolution of 0.001 mm and an accuracy of ±0.004 mm, making it well suited for fine measurement tasks on small components. The absolute measuring system preserves the reference position when powered down, so setup time is reduced and repeatability improves during serial inspections. The specified measuring force of 0.6–1 N helps maintain consistent contact pressure, cutting variability from manual handling and supporting reliable process control.
Built for shop-floor robustness and data workflows
Protected to IP67, the device tolerates dust and splash exposure that can occur on busy benches. Power is supplied by a standard CR2032 3V cell for straightforward replacement, while the USB data output enables direct transfer to SPC software or data loggers without intermediary converters. These technical choices reduce administrative overhead and speed up traceability: measurements can be captured and archived electronically for audits and continuous improvement.
Calibrated and traceable for quality systems
Delivered with an ISO 17025 calibration certificate, the indicator supports management systems that require documented traceability. The included calibration ensures the measurement results are verifiable against recognised standards and simplifies incoming inspection for suppliers and contract manufacturers. For organisations aiming to maintain consistent quality records, the certified delivery removes ambiguity about instrument status at the point of first use.
Clear display and practical controls for everyday use
The digital readout offers fast switching between mm/inch and provides PRESET, HOLD and MODE functions for flexible measurement routines and setup tasks. These features help reduce operator steps during batch checks: preset a target, take the reading and hold the value for documentation. Together with its compact form factor, the instrument integrates easily into inspection benches, jig checks and general quality-control workflows.
For certified measurement and robust shop-floor data capture choose the Microtech Metrology digital indicator and contact Metav Werkzeuge for purchasing and technical guidance from our Emmerich quality team – email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 120125133
- GTIN: 4061905081897
- Category: Messuhren
- Manufacturer: Microtech Metrology
Core technical data
- Measuring range: 0–12.7 mm
- Resolution: 0.001 mm (0.00005 in)
- Accuracy: ±0.004 mm
- Measuring force: 0.6–1 N
- Battery: CR2032 3V
- Protection class: IP67
Special features
- Data output: USB
- Measurement system: Absolute
- Digital display: mm/inch, PRESET, HOLD, MODE
- Delivered with ISO 17025 calibration certificate
FAQ
How accurate is the indicator?
The Microtech Metrology digital indicator provides an accuracy of ±0.004 mm with a resolution of 0.001 mm; the unit is supplied with an ISO 17025 calibration certificate for traceable results.
Can this instrument be used at the machine or on the shop floor?
Yes, the IP67 protection class makes the indicator suitable for use in dusty or splash-prone environments commonly found on the shop floor.
How are measurements transferred to a computer?
Data are exported via the built-in USB output for direct capture into SPC or measurement logging software.
Does the indicator need re-zeroing after power loss?
No; the absolute measuring system retains its reference position, so re-zeroing after power interruption is not required.
What display functions are available for quick checks?
The display switches between mm/inch and offers PRESET, HOLD and MODE controls to simplify setup and batch inspection procedures.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools