12.7mm Digital Dial Indicator Absolute Display IP68, ISO 17025 Calibrated, 0.001mm Resolution - Microtech Metrology
€179.00
Product information "12.7mm Digital Dial Indicator Absolute Display IP68, ISO 17025 Calibrated, 0.001mm Resolution - Microtech Metrology"
Take advantage of high-resolution measurement, robust IP68 protection and traceable results thanks to ISO 17025 calibration — ideal for shop-floor inspection and laboratory tasks; order the Microtech Metrology digital indicator directly via Metav Werkzeuge or consult our specialists for integration advice.
Digital indicator — 0–12.7 mm, IP68 (Microtech Metrology)
A digital indicator for precise displacement measurement in quality control and small-component inspection, designed for repeatable readings up to 12.7 mm.
- Resolution 0.001 mm / 0.00005 in
- IP68 dust and water protection
- ISO 17025 calibrated with certificate
- USB data output for traceable logging
Consistent high accuracy for quality control
The indicator delivers dependable metrology performance with a resolution of 0.001 mm (displayable as 0.00005 in) and an stated accuracy of ±0.003 mm, making it suitable for fine inspection tasks where dimensional tolerances are tight. The absolute measuring system avoids the need for zeroing on every power cycle, so comparative and absolute measurements remain consistent. The specified measurement force 0.6–1 N reduces operator-induced variability by keeping contact pressure within a defined band, which supports repeatable results and fewer rejects in serial inspection.
Durable design for demanding environments
With an IP68 rating, the unit resists ingress from dust and immersion, allowing use in coolant-prone machining cells and humid production areas without compromise. The compact 0–12.7 mm measuring range focuses on small to medium components, offering a balance of stiffness and reach for tasks such as valve seats, small housings and precision fixtures. The housing and sealed electronics simplify handling on the shop floor while preserving the sensing precision expected in both workshop and laboratory contexts.
Seamless data handling and certified traceability
For process control and documentation the indicator provides USB data output and a multi-function display with mm/inch, PRESET, HOLD and MODE keys, enabling straightforward integration with data-collection systems and manual logging. Supplied fully calibrated to ISO 17025, the tool arrives with a traceable calibration certificate suitable for quality management systems and audit trails. Power is supplied by a CR2032 3V battery, ensuring compact operation without external wiring, while the absolute encoder preserves measurement reference after battery changes.
For reliable integration of Microtech Metrology measurement into production and inspection workflows, contact Metav Werkzeuge to request the ISO 17025 certificate and discuss connector or logging options
Technical Data
- Article number: 120125134
- GTIN: 4061905081903
- Category: Dial indicators / measuring instruments
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–12.7 mm
- Resolution/display: 0.001 mm / 0.00005 in
- Accuracy: ±0.003 mm
- Measurement force: 0.6–1 N
- Protection rating: IP68
- Power: CR2032 3V battery
Special features
- Digital display with mm/inch, PRESET, HOLD, MODE
- USB data output for direct logging
- Absolute measuring system for stable reference
- Supplied calibrated to ISO 17025 with certificate
- Suitable for small-component inspection and lab use
FAQ
Is the indicator delivered calibrated?
Yes. The digital indicator is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability.
Can the display switch between metric and imperial units?
Yes. The unit offers mm/inch display selection via the dedicated mode key for flexible documentation.
How is measurement data transferred to a PC or data logger?
Data is output via USB for direct capture into inspection software or data-collection systems.
Is the device suitable for use near coolant or in wet environments?
The IP68 rating confirms protection against dust and temporary immersion, making it suitable for use in coolant-prone shop-floor settings.
What is the intended application range for this instrument?
With a 0–12.7 mm range and high resolution, it is optimised for small-part inspections, precision fixtures and laboratory verification tasks.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools