11.6" 1/1.9" HD Colour Camera HD Autofocus Progressive Scan Rolling Shutter, C-Mount HDMI WiFi - Euromex

Benefit from a compact inspection system that combines autofocus reliability, 1080p capture and both HDMI and WiFi outputs for fast image transfer; order the VC.3034-HDS directly via Metav Werkzeuge or consult our specialists for application advice.

VC.3034-HDS — HD autofocus colour camera with HDMI and WiFi (Euromex)

The VC.3034-HDS is a high-definition autofocus colour camera designed for microscopy and visual inspection, offering C‑Mount compatibility and immediate digital output for production and laboratory workflows

• 1080p HD capture with Sony sensor
• Autofocus and progressive scan operation
• HDMI and WiFi digital output for integration

Reliable capture and straightforward integration

The camera delivers 1920x1080 capture with a Sony sensor, providing consistent image quality for inspection and documentation. The progressive scan mode reduces motion artefacts during live observation, while the rolling shutter option assists in specific lighting situations; both capture modes are useful when balancing speed and image fidelity. With a standard C‑Mount interface and a supplied 0.5x objective, the unit integrates with existing stereo microscopes and camera stands without lengthy adaptation. The combination of HDMI output and a WiFi dongle enables both wired and wireless workflows, allowing images to be displayed on the built‑in 11.6" screen or streamed to a workstation for further analysis.

Ready for microscopy and quality assurance tasks

Equipped for laboratory routines, the device arrives with adapters (30 mm and 30.5 mm) for stereo microscopes and a 76x24 mm calibration slide (1 mm/100) to ensure measurement traceability. The 24‑bit colour reproduction and a sensitivity of 1.12 V/lux‑sec (1/30 s) support accurate colour assessment and detail recognition under varied illumination. The included 32 GB SD card and high‑speed data handling simplify capture archiving, while the camera’s compact dimensions (81 x 65 x 78 mm) make bench installation unobtrusive. These practical inclusions reduce setup time and allow technicians to focus on inspection tasks rather than on configurational details.

Robust operation and user control for workshop environments

Designed to perform in standard lab and workshop conditions, the unit operates between −10 °C and 40 °C and tolerates relative humidity from 45–85%, supporting continuous use in non‑controlled environments. Both automatic and manual exposure plus automatic and manual white balance give users immediate results or fine control for repeatable inspections. The device maintains a low operating noise of approximately 50 dB, and its power supply accepts a wide input range (100–240 Vac to 12 Vdc/2 A) for compatibility with common laboratory power systems. These features translate into dependable uptime and consistent image output across varied production lines.

Smooth data handling and efficiency gains for inspection workflows

Data output options include HDMI and USB for direct capture to monitors and imaging stations, while the WiFi capability supports remote display and sharing during collaborative inspections. The camera’s autofocus function speeds routine checks by reducing manual adjustment time, and the provided accessories — HDMI cable, USB mouse, power adapter and microscope adapters — enable immediate use on delivery. For quality control, the progressive capture and supplied calibration slide help maintain inspection standards and accelerate decision cycles, delivering a measurable improvement in throughput and repeatability.

Contact Metav Werkzeuge for tailored advice on integrating the VC.3034-HDS into inspection systems and to secure reliable supply from our Emmerich facility; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com

Technical data

• Article number: VC.3034-HDS
• Designation: HD colour camera
• Format: 1/1.9", HDTV 1080p
• Sensor: Sony
• Mount: C‑Mount
• Resolution: 1920x1080 (capture mode)
• Megapixels: 2 MP

Facts

• Dimensions: 81 x 65 x 78 mm
• Screen: 11.6"
• Magnification: 0.5x
• Sensitivity: 1.12 V/lux‑sec (1/30 s)
• Noise: 50 dB
• Operating temperature: −10 °C to 40 °C
• Relative humidity: 45–85%
• Power supply: 100–240 Vac to 12 Vdc/2 A

Special features

• Autofocus operation
• Progressive scan and rolling shutter
• Digital outputs: HDMI and WiFi
• Colour depth: 24 bits
• Included accessories: 30 mm and 30.5 mm microscope adapters, 0.5x objective (C‑Mount), 32 GB SD card, WiFi dongle, 12 V/1 A power adapter, HDMI cable, USB mouse, 76x24 mm calibration slide (1 mm/100), 11.6" screen

FAQ

What capture resolutions does the camera support?
The VC.3034‑HDS records at 1920x1080 in capture mode and outputs full HD via HDMI for inspection and documentation needs.

Is the camera compatible with stereo microscopes?
Yes, the camera includes 30 mm and 30.5 mm adapters and a 0.5x C‑Mount objective to fit most stereo microscope heads.

Can the focus be adjusted automatically during inspections?
Autofocus is built in; the VC.3034‑HDS also offers manual focus control when precise adjustment is required.

How are images transferred and stored?
Images can be output via HDMI, saved on the supplied 32 GB SD card, transferred over WiFi or captured via USB to a workstation.

What environmental conditions can the camera tolerate?
The camera is specified for operation between −10 °C and 40 °C with relative humidity of 45–85%, suiting typical lab and workshop environments.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com