Precision cross tables for drill and milling machines
Cross tables and coordinate tables provide precise two-axis positioning to align workpieces under rotating tools and to execute accurate linear milling paths, improving flexibility and process reliability in metalworking. Designed for use with drill presses, pillar drills and conventional milling machines, these systems combine robust x‑and‑y motion, hardened dovetail or linear guides and lead or ball screw drives to deliver repeatable, fine manual or DRO-assisted adjustments for complex drilling patterns, slotting and facing. Their vibration‑damped cast‑iron worktops with standard t‑slots allow secure clamping of vises and fixtures, enabling efficient toolpaths without repeated re‑clamping.
340x190 Cross Table Precision Travel, 98mm Height - SAIM
Take advantage of the combination of a compact 340 x 190 mm platform, stable 22 kg construction and a low 98 mm height for precise positioning with minimal footprint; order the SAIM-340XG directly via Metav Werkzeuge or ask our consultants if needed. SAIM-340XG Cross Table — 340 x 190 mm platform, 98 mm height A SAIM-340XG cross table for compact, accurate X–Y positioning in small machine setups and inspection stations. Compact 340 x 190 mm platform 98 mm overall height Sturdy 22 kg build Precise positioning in a compact footprint The cross table provides fine, controllable movement across two axes, enabling accurate alignment of small workpieces and measuring samples. With a platform of 340 x 190 mm, the stage suits tasks where space is limited but repeatable movement is required. The compact dimensions reduce required bench space while maintaining a usable travel area; for setups where exact alignment matters, the precision of the sliding surfaces minimises repositioning time and increases throughput. Stable support for machining and inspection fixtures A mass of 22 kg gives the table necessary stability during clamping and adjustment, reducing vibration and improving measurement reliability. The low 98 mm height keeps the centre of gravity close to the machine or inspection plane, which simplifies integration with optical systems or small mills and helps maintain consistent reference heights. Where micro-adjustment is critical, the combination of mass and compact design supports steady, reproducible results. Streamlined workflow and workshop resilience The unit has been conceived for straightforward integration into workshop routines: its modest footprint and robust build reduce set-up complexity and permit rapid changeovers between jobs. As a mechanical positioning solution, the stage enhances operational efficiency by cutting down on iterative adjustments and ensuring accurate, repeatable placement of jigs or parts. For toolrooms and inspection benches seeking reliable mechanical positioning, the table offers a pragmatic balance of precision and everyday usability. Contact Metav Werkzeuge today for tailored advice on integrating the SAIM-340XG into existing workstations or to request detailed technical information relevant to the intended application. Technical data SKU: SAIM-340XG GTIN: 4061905082252 Manufacturer: SAIM Dimensions & weight Platform: 340 x 190 mm Height: 98 mm Weight: 22 kg Features & compatibility Cross table / XY stage Compact design for small benches Suitable for precise positioning tasks FAQ What are the main dimensions of the stage? The SAIM-340XG cross table has a platform of 340 x 190 mm and an overall height of 98 mm, with a weight of 22 kg. How does the mass affect performance? A weight of 22 kg increases stability during clamping and adjustment, which helps the SAIM-340XG maintain repeatable positioning and reduce vibration-related errors. For which tasks is this cross table suited? The SAIM-340XG is suited to precise positioning tasks in small machining, inspection and assembly setups where a compact, stable XY stage is required. Which identifiers are useful for ordering or documentation? Use SKU SAIM-340XG and GTIN 4061905082252 for ordering and inventory documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Mini Cross Table 75mm Height, 400x100 Platform - SAIM
Compact footprint and bench-top suitability combined with a low overall height and light weight make this stage straightforward to fit into existing workstations; the SAIM-400XY mini cross slide table is therefore a practical choice for small-scale positioning tasks — order through Metav Werkzeuge or consult our advisors for detailed specifications. SAIM-400XY Mini cross slide table — 400 × 100 mm platform, 75 mm overall height The SAIM-400XY is a compact cross slide table designed for precise manual positioning on bench-top setups and small machines. Compact 400 × 100 mm platform Low overall height of 75 mm Lightweight at 10 kg SAIM mini cross slide design Accurate positioning in a compact footprint The mini cross slide table delivers straightforward, repeatable motion in a very small package. With a 400 × 100 mm platform and a 75 mm overall height, the stage is tailored to situations where space is limited but controlled linear movement is required. The compact layout simplifies integration into inspection stations, small milling fixtures, or measuring benches while the low profile reduces centre-of-gravity effects on lighter assemblies. The combination of a small footprint and clear mechanical layout supports efficient workflow planning and reliable part handling. Easy handling and straightforward installation Weighing just 10 kg, the unit is light enough for simple relocation yet substantial enough for stable bench-top use. The design is suited to quick mounting and basic alignment without complex fixtures, making it well adapted for laboratories, toolrooms and prototyping benches. The mechanical guidance is aimed at manual control and incremental adjustment, which helps minimise setup time and keeps maintenance uncomplicated. This balance of bench-top integration and manageable mass reduces downtime and keeps secondary handling costs low. Practical uses and suited applications The stage is appropriate for tasks that demand fine lateral adjustment and repeatable positioning: component inspection, small-part machining, alignment procedures and prototype assembly benefit from the manual positioning capability. As a compact positioning stage, it complements measuring equipment and small machine tools where a full-size table would be disproportionate. The simple, space-efficient design supports modular workstations and aids process standardisation in workshops with varied, small-batch tasks. For specification advice or to request a tailored supply recommendation for the SAIM-400XY mini cross slide table, contact Metav Werkzeuge — our consultants are available to review integration options and compatibility with existing setups. Technical Data Article number: SAIM-400XY GTIN: 4061905082375 Manufacturer: SAIM Facts Platform dimensions: 400 × 100 mm Overall height: 75 mm Weight: 10 kg eClass: 21041714 Special features Designation: Kreuztisch Mini Gallery image: saim_draw_x.jpg Technical drawing: saim-150x-technische-zeichnung.jpg FAQ What are the exact platform dimensions? The platform measures 400 × 100 mm, providing a compact surface for small parts and fixtures with the SAIM-400XY mini cross slide table. How high is the stage and what is its mass? Overall height is 75 mm and the unit weighs 10 kg, enabling low-profile bench integration with modest handling requirements. Is the unit intended for bench-top use or machine mounting? The SAIM-400XY is designed primarily for bench-top and small-station applications where manual, repeatable lateral adjustment is needed. Which tasks suit this cross slide table? Typical uses include component inspection, precision alignment, prototyping support and small-part machining where a compact positioning stage is preferable. How is the product identified for ordering and cataloguing? Refer to the article number SAIM-400XY and GTIN 4061905082375 when specifying this mini cross slide table. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x100 Cross Table Mini Compact Manual XY Stage, 93mm Height - SAIM
Take advantage of the compact 400 × 100 mm platform and stable 11 kg construction to bring precise, repeatable XY positioning to small benches and fixtures; order directly via Metav Werkzeuge or consult their technical team for integration advice. SAIM-400XYG Mini Cross Table — compact 400 × 100 mm XY stage A SAIM-400XYG Mini Cross Table engineered for precise manual positioning and low-profile fixturing in workshops and laboratory benches. Compact 400 × 100 mm platform Stable 11 kg construction Low 93 mm profile for tight setups Precise positioning with a compact footprint The mini cross table delivers a compact footprint that suits crowded benches and small machine tools. The 400 × 100 mm tabletop provides a stable working area for small parts handling and alignment tasks, while the low profile helps to maintain the optical axis in inspection or assembly rigs. This configuration supports precise manual translation and repeatable positioning, reducing time spent on re‑clamping and alignment. Where space is at a premium, the mini cross table keeps workpieces accessible without compromising on control. Stability and repeatability for everyday workshop use At 11 kg, the unit offers a mass that dampens vibration and improves stability during hand‑guided operations, contributing to repeatable setups. The 93 mm height presents a low centre of gravity that benefits fine adjustment work and minimises deflection under small clamping loads. This balance of mass and profile helps maintain consistent results across repeated cycles, making the stage suitable for precision assembly, optical alignment and bench‑scale measurement tasks where steady positioning matters most. Installation and integration made straightforward A technical drawing and product image are supplied with the dataset to assist with mechanical integration; the available technical drawing supports mounting and spatial planning. The stage’s clear identification via GTIN and SKU simplifies procurement and inventory tracking, enabling streamlined ordering and parts management. For systems engineering, the compact dimensions and documented geometry allow straightforward planning for fixtures and adapters without extensive on‑site modification. Practical applications and ease of use The cross table adapts well to small‑component fixturing, inspection jigs and light machining set‑ups where fine XY adjustment is required. The design emphasises practical use: compactness for bench environments, sufficient mass for stability and a form factor that fits into existing workflows. Routine handling and basic maintenance remain simple due to the uncomplicated configuration, which supports long service life in normal workshop conditions. For precise integration and order details for the SAIM-400XYG, contact Metav Werkzeuge in Emmerich – their specialists can advise on compatibility and delivery from their European distribution centre. Technical data Article number: SAIM-400XYG GTIN: 4061905082399 Eclass: 21041714 Label: Kreuztisch Mini Core measurements Platform dimensions: 400 x 100 mm Height: 93 mm Weight: 11 kg Design and features Product type: Mini cross table Manufacturer: SAIM Image assets available: product photo, technical drawing FAQ What are the exact tabletop dimensions of the cross table? The tabletop measures 400 x 100 mm, which defines the usable translation area for positioning and fixturing. Is the construction material specified for the SAIM-400XYG? Material data is not specified in the provided dataset; refer to the supplied technical drawing for mounting dimensions and request material details if required. Is the SAIM-400XYG suitable for bench‑top fixturing and optical alignment? Yes, the SAIM-400XYG mini cross table is suited to bench‑top fixturing and optical alignment thanks to its compact footprint and stable mass. How heavy is the unit and what is its profile height? The unit weighs 11 kg and has a profile height of 93 mm, offering stability with a low centre of gravity. Are technical drawings and images included for planning? Yes, a technical drawing and a product photograph are available with the product assets to support installation planning and integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x100 Cross Table Mini Compact Precision Stage - SAIM
Compact, low-profile design meets reliable positioning: 400 x 100 mm platform and 68.5 mm overall height for precise, space-saving setups. Benefit from dependable XY adjustment and stable support — order the SAIM-400XG through Metav Werkzeuge or consult our specialists for application advice. SAIM-400XG Mini cross table – compact 400 x 100 mm platform, 68.5 mm height A compact positioning table, the SAIM-400XG is intended for fine XY adjustment in confined machine, inspection and assembly environments. Compact low-profile design, 68.5 mm height Platform size 400 x 100 mm for stable setups Precise XY positioning for machining and inspection Robust weight of 8 kg ensures stability Precision positioning in confined spaces The miniature cross table delivers precise XY positioning on a compact footprint. With a 400 x 100 mm platform and a slim 68.5 mm profile, the unit is suited to setups where vertical clearance is limited but micrometric lateral adjustment is required. The low centre of gravity combined with an overall mass of 8 kg reduces vibration and increases stability, which translates into more consistent results when aligning small workpieces for light milling, drilling or metrology tasks. Technical drawings are available to verify mounting and integration in existing rigs. Space-saving layout that improves workflow A compact design reduces bench clutter and allows for closer integration with measuring instruments and small machine tools. The tight dimensions mean the table can be placed in inspection jigs or on limited work surfaces without compromising access to tooling or measuring heads. This arrangement shortens handling time and streamlines process steps, offering a measurable efficiency gain in repetitive positioning tasks without requiring a larger machine footprint. Practical benefits for workshop and lab use Engineered for repeatable adjustment, the cross slide table supports fine incremental movements that simplify set-up and reduce rework. Clear mechanical movement improves alignment accuracy and enables quicker exchange between operations such as light machining, inspection and assembly. For workshop managers and lab technicians seeking consistent results from frequent repositioning, the combination of compact size and repeatable positioning reduces downtime between batches and supports tighter process control. Choosing and integrating the table into existing systems Suitable for tool rooms, inspection benches and small-scale production cells, the table provides a straightforward solution where precise lateral movement is required but space is limited. When specifying the unit, confirm platform mounting and clearance against the supplied technical drawing; Metav Werkzeuge can supply these documents and advise on compatible fixtures. The design supports a wide range of small workholding arrangements and is particularly useful where stable, low-height positioning is a priority. For bespoke setups, technical clarification is available via Metav's consultancy channels. Contact Metav Werkzeuge for tailored configuration and rapid dispatch from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — request the SAIM-400XG datasheet or integration advice today Technical Data Article number: SAIM-400XG GTIN/EAN: 4061905082382 Label: Kreuztisch Mini Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0d/af/6b/63/636baf0d5ba163a434b93e44/saim-150x-xg-modelle.jpg Facts Platform dimensions: 400 x 100 mm Height: 68.5 mm Weight: 8 kg eClass: 21041714 Special features Miniature cross table for fine XY positioning Compact footprint for small workbenches Technical drawing available (see assets) Suitable for inspection and light machining tasks FAQ What are the exact platform dimensions? The SAIM-400XG features a platform of 400 x 100 mm, suitable for small workpieces and fixtures. What is the overall height and how does it affect integration? Overall height is 68.5 mm; this low profile helps integrate the SAIM-400XG into confined setups and under measuring heads. How heavy is the cross table and does that aid stability? The unit weighs 8 kg; this mass contributes to positional stability during light machining and inspection operations. Are technical drawings available for planning and mounting? Yes — technical drawings and asset images are provided for the SAIM-400XG to assist with precise mounting and system integration. Manufacturer: SAIM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x100 Cross Table Mini, Precision 50.5mm Height - SAIM
Compact, precise and simple to integrate: the combination of a 400 x 100 mm tabletop, a low profile of 50.5 mm and a lightweight build ensures efficient workstation setup and reliable positioning. Order the SAIM-400X directly via Metav Werkzeuge or consult their technical advisors for tailored delivery and specification support. SAIM-400X – SAIM mini cross table with compact 400 x 100 mm top, 50.5 mm height The SAIM-400X is a compact cross table designed for accurate positioning tasks in small machine shops, inspection benches and tooling jigs. Compact 400 x 100 mm top Low profile 50.5 mm height Lightweight 7 kg for easy handling Precise incremental positioning Improves setup accuracy and reduces repositioning time The compact cross table delivers a measurable improvement in repeatability for small-scale operations. With a 400 x 100 mm working surface and a 50.5 mm installation height, the device minimises the distance between workpiece and tool, helping to cut changeover and alignment times. The restrained footprint and lightweight 7 kg mass make the unit straightforward to manoeuvre and integrate on benches or measuring rigs. Emphasis on stable positioning and fine adjustment translates into fewer corrective passes and more consistent results during machining, assembly or inspection cycles. Fits tight workspaces and integrates without fuss Designed for environments where space is at a premium, the compact design supports efficient layout planning. The low profile and narrow tabletop allow the table to sit close to fixtures, gauges and optical equipment while keeping the overall workstation height low. This configuration improves accessibility for manual operations and simplifies camera or probe alignment in measuring applications. The cross table’s form factor supports modular setups and can be combined with clamping plates or small vises to create a versatile micro-fixture station that enhances throughput in small-batch production. Practical benefits for inspection and light machining Small workshops and metrology benches gain from predictable positioning and repeatable indexing when using this cross table. The robust, straightforward design limits unnecessary complexity while offering a reliable platform for fine positional control. For measuring tasks, the low height helps bring parts within the focal range of microscopes and optical sensors; for light machining, the compact surface concentrates operations and helps stabilise the workpiece. The result is a practical accessory that supports consistent quality control and more efficient manual processes with minimal setup overhead. Contact Metav Werkzeuge for a detailed specification sheet and delivery options for the SAIM-400X; technical advisors are available from Emmerich to assist with integration and dispatch. Technical data Article number: SAIM-400X GTIN: 4061905082368 SKU: SAIM-400X Specifications Table top dimensions: 400 x 100 mm Height: 50.5 mm Weight: 7 kg eClass: 21041714 Features and applications Model designation: Kreuztisch Mini Compact cross table for precision positioning Suitable for small machine shops and inspection benches Gallery images available for technical drawing and models FAQ What primary applications suit this cross table? The SAIM-400X cross table is suitable for precision positioning tasks on small machine tools, inspection benches and assembly jigs where a compact footprint is required. What are the exact tabletop dimensions? The working surface measures 400 x 100 mm, providing a compact but practical area for small components and fixtures. How tall is the unit and why does that matter? The unit height is 50.5 mm, a low profile that aids integration with measuring devices and keeps parts close to tooling and optical sensors. Is the cross table easy to move between workstations? With a weight of 7 kg the SAIM-400X can be repositioned by workshop personnel for flexible workstation layouts while remaining stable during use. Can the SAIM-400X be combined with clamping accessories? The design supports integration with small clamping plates and vises to create stable micro-fixture setups for inspection and light machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430x240 Cross Table Precision Cross Slide, 143mm Height - SAIM
Take advantage of a compact, rigid cross slide table that combines dependable repeatability and a stable mounting platform for efficient fixture set-up and accurate machining outcomes. Order directly via Metav Werkzeuge or consult the team for application advice and supply options. SAIM-430XYG cross slide table — compact X–Y positioning with robust platform The SAIM-430XYG is a precision cross slide table designed for accurate workpiece positioning and repeatable setup in workshop and light industrial fixturing applications. Compact platform 430 x 240 mm for tight set-ups Rigid design supports stable clamping and repeatability Built for workshop integration and simple alignment Consistent, measurable positioning for production tasks The cross slide delivers repeatable positioning that reduces cycle-to-cycle variation and supports efficient process control. The 430 x 240 mm platform gives a well-defined mounting area for vises, fixtures or inspection jigs, while the compact overall footprint supports installation in confined work cells. Where process reliability matters, the emphasis on stable, low-play movement translates into fewer set-up adjustments and more consistent end results. Technical users will value the predictable behaviour under cyclic loading and the clear reference of scale-driven axes for controlled, incremental movement. Faster set-up and improved workflow with X–Y capability By combining orthogonal travel into a single unit, the device streamlines alignment and reduces handling time between operations. The integrated X–Y arrangement enables fine corrective shifts without remounting the workpiece, helping to shorten fixture set-up time and to accelerate measurement or machining sequences. The simplified handling reduces non-productive time, supporting higher throughput in small-batch and prototype production. In practical terms, this means less repositioning, quicker alignment checks and a smoother production flow when repeat adjustments are required. Durable construction for everyday workshop use Engineered for routine workshop conditions, the stage presents a balance between compactness and mass for stability. The relatively substantial 50 kg mass helps damp vibration and supports consistent results during manual or light automated operations. The measured height of 143 mm offers a convenient elevation for clamping systems while maintaining a low centre of gravity. The design intent focuses on robust operation and straightforward integration rather than delicate laboratory handling; maintenance is therefore limited to routine cleaning and lubrication of sliding surfaces to preserve the unit’s performance. Practical integration and application guidance Installation requires only sensible fixturing and alignment; the table is suited to tasks such as precision positioning for drilling, inspection jigs, optical checks and light machining. Its compact platform and rigid behaviour make it appropriate where space is at a premium but positional accuracy remains essential. For users new to precision stages, the combination of a clearly defined mounting area and straightforward mechanical travel simplifies the adoption into existing fixturing systems. When selecting a stage for a specific task, check compatibility with the intended clamping hardware and confirm that the platform size and overall mass meet the application’s static and dynamic requirements. For application-specific advice or to arrange procurement of the SAIM-430XYG cross slide table, contact Metav Werkzeuge for tailored recommendations and supply details by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SAIM-430XYG GTIN: 4061905082306 Manufacturer: SAIM Facts Platform dimensions: 430 x 240 mm Height: 143 mm Weight: 50 kg eCl@ss: 21041714 Special features X–Y cross slide table for precise positioning Compact footprint for tight workspace integration Suitable for fixture mounting and inspection jigs FAQ What machining and workshop tasks suit this cross slide table? The SAIM-430XYG cross slide table is suitable for positioning tasks such as light drilling set-ups, inspection jigs and precise fixture alignment where a 430 x 240 mm platform and stable travel are required. How is accuracy maintained over repeated cycles? Accuracy is maintained through the rigid construction and mass of the unit; the SAIM-430XYG’s design reduces play and dampens vibration to support repeatable positioning in routine workshop use. Can the table be integrated with existing fixturing systems? Yes, the compact platform and standard mounting surface of the SAIM-430XYG allow straightforward integration with vises, clamps and inspection fixtures typically used in small-batch production and prototyping. Are special tools or expertise required for installation? Basic mechanical alignment and standard fastening tools are sufficient; specialist machining tools are not required for typical installation of the SAIM-430XYG into a bench or machine work area. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430x240 Cross Table Precision Travel, 93.5mm Height - SAIM
Take advantage of precise 430 x 240 mm travel and a compact 93.5 mm profile to keep setups stable and workflows efficient; order directly via Metav Werkzeuge or consult the Metav team for configuration advice. SAIM-430X cross table – precision positioning with 430 x 240 mm travel The SAIM-430X cross table is a compact positioning solution for workshop and inspection tasks, offering controlled X–Y movement across a 430 x 240 mm platen for repeatable alignment and fine adjustment. Cross table 430 x 240 mm travel Slim profile – 93.5 mm overall height Solid 32 kg construction for stability Suitable for workshop and inspection use Reliable positioning for repeatable results The cross table provides a defined travel area of 430 x 240 mm, enabling accurate manual or machine-mounted positioning for components and instruments. The guided motion is engineered to support controlled incremental adjustments, which leads to consistent alignment during measuring, assembly or inspection processes. The measurable travel dimensions serve as a clear basis for integrating the table into existing workflows and for planning fixtures or jigs. Compact height with robust stability With an overall height of 93.5 mm and a mass of 32 kg, the unit delivers a low centre of gravity and inherent stability, reducing vibration and improving the steadiness of mounted tools or gauges. The compact profile allows installation on benches, rotary tables or inspection stages without significantly increasing stack height, while the solid construction helps maintain positional integrity under moderate loads and during precise manual handling. Designed to fit inspection and workshop environments The model is conceived for general workshop and inspection use, where reliable, repeatable travel and a compact footprint matter. The layout and weight make the table suitable as a base for microscopes, measuring heads and small fixturing systems, supporting a range of routine metrology and assembly tasks. Visual references such as the technical drawing and main image are supplied to assist with layout planning and to verify compatibility with carriers or machine beds. Traceable item with clear identifiers The item is listed under GTIN 4061905082276 and SKU SAIM-430X, enabling straightforward procurement and stock tracking. The clear product identifiers support ordering, inventory management and verification processes in the supply chain, contributing to a smoother integration into procurement systems and technical documentation. For tailored advice on integrating the SAIM-430X cross table into a specific setup or to request ordering support, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: SAIM-430X GTIN: 4061905082276 Manufacturer: SAIM Facts Weight: 32 kg Platform dimensions: 430 x 240 mm Overall height: 93.5 mm eCl@ss: 21041714 Special features Cross table type Suitable for workshop and inspection setups Technical drawing and main image available FAQ What are the travel dimensions of the table? The travel area is 430 x 240 mm, providing defined X–Y movement for positioning tasks. What is the overall height and why does it matter? The overall height is 93.5 mm; the low profile helps reduce stack height in multi-component setups and improves accessibility. How heavy is the unit and what does that mean for stability? The table weighs 32 kg; the mass contributes to stability and reduced vibration for more reliable measurements and handling. Is this table suitable for inspection and metrology applications? Yes, the SAIM-430X cross table is intended for workshop and inspection use and is compatible with common small measuring and fixturing arrangements. Are visual references available to check compatibility? A technical drawing and a main product image are provided to assist with planning and compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430x240 Cross Table With 116.5mm Height, Precision Adjustment - SAIM
The robust combination of a 430 x 240 mm work surface and a compact 116.5 mm height delivers stable, repeatable positioning with a solid 35 kg mass for reduced vibration — order the SAIM cross table directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. SAIM-430XG Cross table — 430 x 240 mm top, compact 116.5 mm height A SAIM-430XG cross table designed for precise XY positioning and secure workholding in inspection, assembly and light machining tasks. Compact 430 x 240 mm top for small footprints Solid 35 kg mass for stable operation Low-profile 116.5 mm height for tight setups Precise cross-slide motion for repeatable positioning Precision and stability for repeatable positioning The cross-slide design delivers consistent lateral movement and controlled positioning, making it suitable where repeatability matters. The 430 x 240 mm top provides a clearly defined mounting area for fixtures, jigs or measurement devices, while the 35 kg mass contributes to reduced vibration during handling and measurement. These attributes translate directly into fewer reworks and more predictable cycle times in small-batch production and laboratory setups. Space-saving integration in workshop environments Low-profile construction with a 116.5 mm overall height enables installation in constrained vertical spaces without sacrificing functionality. The compact footprint supports efficient bench or machine-table layouts, freeing room for adjacent tools and instruments. Specified dimensions make planning straightforward: the top area and overall height can be integrated into CAD layouts or workbench designs to ensure seamless system integration. Application-oriented functionality and handling Engineered for positioning and assembly tasks, the table’s geometry facilitates secure clamping and alignment workflows. The cross-slide movement is optimised for fine adjustments and repeatable indexing, improving throughput when multiple parts require identical orientation. The unit’s mass and platform size make it a practical choice for metrology stations, small‑part assembly or light rework operations where positional accuracy is a priority. Technical clarity and procurement readiness Key numerical specifications and the clear SKU identification support fast procurement and parts management. The concise set of measurable values allows engineering teams to compare alternatives objectively and confirm compatibility with existing fixtures or machine tables. Where additional fitting information is required, Metav Werkzeuge can provide drawing files and procurement support to streamline sourcing and reduce lead time. Contact Metav Werkzeuge for a tailored quote or application advice — Metav Werkzeuge GmbH can advise on integration, mounting accessories and delivery from Emmerich to the workshop. Email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SAIM-430XG for specific use cases Technical data Article number: SAIM-430XG GTIN: 4061905082290 eCl@ss: 21041714 Facts Top dimensions: 430 x 240 mm Height: 116.5 mm Weight: 35 kg Special features Cross table / cross-slide design Compact footprint for bench integration Precise XY positioning for inspection and assembly FAQ What is the top surface size of the SAIM-430XG? The SAIM-430XG has a top surface of 430 x 240 mm, providing a defined mounting area for fixtures and measurement devices. How tall is the unit and why does that matter? The overall height is 116.5 mm, which allows installation in low-clearance setups and simplifies integration into compact workstations. Is the SAIM-430XG suitable for metrology stations? Yes, the cross-slide geometry and stable 35 kg mass make the SAIM-430XG well suited to metrology applications where repeatable positioning is required. Which identifier should be used for ordering and stock control? Use the SKU SAIM-430XG together with GTIN 4061905082290 for procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430x240 Kreuztisch mit Feingewindefeinverstellung, höhenverstellbar - SAIM
SAIM-430XY Kreuztisch Der SAIM-430XY Kreuztisch bietet präzise Positionierung für Zerspanungstechnik und Werkstattanwendungen mit kompakter Tischfläche und robuster Konstruktion. SAIM-430XY Kreuztisch von SAIM Tischfläche 430 x 240 mm Kompakte Höhe 120 mm für flache Montage Solide Bauweise, Gewicht 40 kg Geeignet für präzise Positionierung Präzision und Effizienz für den Werkstattalltag Der SAIM-430XY Kreuztisch wurde für Anwender konzipiert, die Präzision und reproduzierbare Ergebnisse in Fertigungsprozessen benötigen. Die Tischfläche mit den Abmessungen 430 x 240 mm erlaubt sichere Fixierung von Werkstücken bei kleinen bis mittleren Bauteilen. Durch die kompakte Höhe 120 mm bleibt die Auflagefläche niedrig, was die Integration in bestehende Maschinensysteme vereinfacht und Aufspannwege optimiert. Anwender profitieren von klaren Vorteilen in der Prozesssicherheit und reduzieren durch stabile Geometrie Rüstzeiten und Nacharbeit. Robuste Bauweise und Montagevorteile Die massige Konstruktion mit einem Gewicht 40 kg garantiert Standfestigkeit und gleichbleibende Genauigkeit auch unter belasteter Bearbeitung. Die Bauform unterstützt flache Montagekonzepte und erlaubt die direkte Kombination mit Fräs- und Schleifaufbauten oder Messgeräten. Die solide Ausführung minimiert Vibrationen und erhöht die Präzision bei Feinarbeiten. Für Werkstattbetreiber bedeutet das eine bessere Fertigungsstabilität und geringere Ausschussquoten bei Serien und Einzelteilen. Zielgruppe und typische Einsatzfelder Der Kreuztisch richtet sich an Betriebe der Zerspanungstechnik, an Maschinenbauer und an qualifizierte Werkstätten, die wiederkehrende, exakte Positionierungen benötigen. Typische Anwendungen sind Feinschlicht-, Bohr- und Messaufgaben an kleinen Komponenten sowie das Positionieren von Vorrichtungen bei Prototypenfertigung. Durch die handliche Tischgröße eignet sich das Produkt besonders dort, wo Platzsparung und präzise Verstellbarkeit gefordert sind. Einfache Integration und Handling Die klar definierte Tischfläche erleichtert das Aufspannen von Spannmitteln und die Ausrichtung an Referenzpunkten. Wegen des kompakten Aufbaus ist die Einbindung in bestehende Arbeitsplätze schnell realisierbar; zusätzliche Justagen bleiben auf ein Minimum beschränkt. Anwender erhalten damit eine pragmatische Lösung für wiederkehrende Montage- und Fertigungsschritte, die den Workflow begleitet ohne umfangreiche Restrukturierung der Fertigungszellen. Empfehlung: Entscheiden Sie sich für den SAIM-430XY Kreuztisch als robuste Basis für präzise Positionierungsaufgaben und kontaktieren Sie bei Bedarf unsere technische Beratung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 für integrationsspezifische Fragen. Produktmerkmale Artikelnummer: SAIM-430XY Marke: SAIM Bezeichnung: Kreuztisch GTIN: 4061905082283 (Globale Artikelnummer) eClass: 21041714 (Produktklassifikation) Daten Tischfläche: 430 x 240 mm Höhe: 120 mm Gewicht: 40 kg Besonderheiten SKU: SAIM-430XY Abmessungen Tischplattform: 430x240 FAQ Welche Maße hat die Tischfläche? Die Tischfläche misst 430 x 240 mm und bietet damit eine kompakte Auflage für kleine bis mittlere Werkstücke; ideal für präzise Positionierungsaufgaben mit dem SAIM-430XY Kreuztisch von SAIM. Wie schwer ist der Kreuztisch und was bedeutet das für die Stabilität? Mit einem Gewicht von 40 kg sorgt der Kreuztisch für hohe Standfestigkeit, reduziert Vibrationen und verbessert die Wiederholgenauigkeit bei spanenden Arbeiten. Für welche Anwendungen eignet sich der Kreuztisch besonders? Der Kreuztisch ist geeignet für Feinarbeiten in der Zerspanungstechnik, Vorrichtungsaufspannungen und Messaufgaben, bei denen kompakte Tischflächen und stabile Positionierung gefragt sind. Wie lässt sich der Kreuztisch in bestehende Maschinen integrieren? Die geringe Höhe und die standardisierte Tischfläche erleichtern die Montage auf Fräs- und Messmaschinen; für spezifische Integrationsfragen stehen technische Beratung und Montagetipps zur Verfügung. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x240 Cross Slide Table Precision Cross Table, 116.5mm Height - SAIM
Compact positioning and a robust build make for dependable machine-tool integration; benefit from the 600 x 240 mm platform and low overall height to save space and simplify fixtures. Order the SAIM-600XG directly via Metav Werkzeuge or consult our specialists for application-specific advice. SAIM-600XG — Cross table with 600 x 240 mm platform and compact height The SAIM-600XG is a compact cross table designed for precise positioning and straightforward integration into machine tools, inspection stations and assembly fixtures. Cross table »SAIM-600XG« with 600 x 240 mm platform Stable, precision-ground top for repeatable positioning Compact design with 116.5 mm overall height Weighs 46 kg for vibration damping and stability Accurate positioning for tighter tolerances A cross table with a 600 x 240 mm working surface delivers measurable advantages in set-up efficiency and part handling. The low-profile overall height of 116.5 mm reduces the distance between workpiece and spindle or measuring probe, which helps to lower flex and improve controllability. The combination of a precision-ground top and a substantial mass ensures accuracy and repeatability during manual adjustments, resulting in fewer reworks and a steadier production flow. Photographs and technical drawings support evaluation before integration. Mass and geometry that improve process stability At approximately 46 kg, the table's mass contributes to natural damping of incidental vibrations, creating a more stable base for light to medium machining and measuring tasks. A heavier accessory can reduce chatter and promote consistent surface finishes when used as a fixture or positioning stage. The platform geometry is optimised for clamp placement and repeatable fixturing, so component alignment becomes quicker and more reliable on the shop floor. This results in reduced setup time and increased throughput for repetitive operations. Straightforward mounting and ergonomic operation The table has been conceived as a machine-tool accessory that is easy to mount and align. Clear platform dimensions allow for predictable fixture design and seamless transfer between measuring benches and machining centres. Where manual adjustment is required, the arrangement supports fine-tuning without complex controls, helping to keep operator training time short. Available drawings and gallery images aid planning and ensure compatibility with existing clamping systems and tooling. Why Metav as a precision partner makes a difference Choosing this cross table through Metav means access to a broad stock range and a quality filter based in Emmerich: reliable availability, expert advice and a clear supply chain that reduces procurement complexity. Metav’s decades of experience with workshops and industry translate into practical purchasing guidance, so the component arrives ready to be integrated into production processes. The result is a pragmatic solution that supports both efficiency and long-term reliability. Discuss integration of the SAIM-600XG with Metav Werkzeuge — contact our consultants in Emmerich for tailored advice, CAD drawings and delivery options Technical data Article number: SAIM-600XG GTIN: 4061905082337 ECLASS: 21041714 Facts Platform dimensions: 600 x 240 mm Overall height: 116.5 mm Weight: 46 kg Special features Product type: Cross table Drawing and gallery images available Suitable as a machine-tool positioning accessory FAQ What applications is this cross table suited for? The SAIM-600XG is suited for machine-tool integration, inspection stations and assembly fixtures where precise, repeatable positioning is required. What are the exact working dimensions? The working platform measures 600 x 240 mm and the overall height is 116.5 mm for straightforward fixture planning. Does the table offer vibration damping? With a mass of 46 kg, the table provides inherent vibration damping that supports stable positioning and improved surface consistency. Are technical drawings and images available for planning? Yes, drawings and gallery images are provided to assist with mounting design and compatibility checks for the SAIM-600XG. Can this cross table be used for inspection and light machining tasks? The SAIM-600XG is designed as a robust positioning accessory suitable for inspection benches and light to medium-duty machine-tool applications. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x240 Cross Slide Table Precision Stage, 143mm Height - SAIM
Benefit from precise XY positioning and a compact footprint combined with robust mass for stable machining and repeatable setups. The construction supports integration into small-series production and retrofit projects; order handling and application advice are available via Metav Werkzeuge or consult the specialists for configuration support. SAIM-600XYG cross slide table — 600 x 240 mm top, 143 mm height The SAIM-600XYG is a precision cross slide table designed for machine integration and repeatable XY alignment in workshop and light industrial environments. Accurate XY positioning system Table size 600 x 240 mm Low profile: 143 mm height Robust mass: 61 kg for stability Precise positioning for demanding setups High-accuracy positioning is the primary benefit of a quality cross slide table. The integrated guideways and lead-screw arrangement deliver consistent XY positioning, reducing setup time and minimizing rework between operations. For users unfamiliar with the mechanics, lead screws convert rotary motion into linear travel and, when paired with rigid guides, deliver repeatable offsets that simplify fixture alignment and increase throughput. This results in measurable improvements in process reliability for milling, drilling and inspection tasks. Compact footprint for easy integration into machines A table top of 600 x 240 mm combined with a low overall height of 143 mm allows straightforward installation on existing machine beds and tooling stations. The compact design enables retention of work envelope while adding precise two-axis movement where required. In retrofit scenarios, the cross slide table integrates without major alterations, preserving machine geometry and enabling flexible set-ups for small-batch production and prototyping. Mass and rigidity that reduce vibration and improve finishes A mass of 61 kg contributes to inherent damping and counteracts cutting forces that would otherwise cause chatter or surface irregularities. Greater rigidity means less elastic deformation under load, which improves surface finish and dimensional accuracy. For processes that require tight tolerances, the combination of stiffness and stable mass reduces the frequency of tool compensation and inspection, supporting higher first-pass yield and lower scrap rates. Practical compatibility and documentation support Delivery includes detailed technical drawings and model references to assist planning and CNC programme adaptation. The mechanical design is oriented towards straightforward clamping and alignment; available assets show mounting patterns and overall geometry to aid in fixture design. When exact integration details are required, the documentation supports rapid engineering decisions and shortens the time from purchase to production readiness. Contact Metav Werkzeuge for a tailored quotation and discuss application-specific options for the SAIM-600XYG cross slide table — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SAIM-600XYG GTIN: 4061905082405 Manufacturer: SAIM Core data Table dimensions: 600 x 240 mm Height: 143 mm Mass: 61 kg eCl@ss: 21041714 Special features Cross slide table for XY positioning Suitable for machine integration Technical drawings and model images available FAQ What accuracy can be expected from this cross slide table? The accuracy depends on the installed guide and screw system; the SAIM-600XYG is designed for repeatable XY positioning and consistent set-up results suitable for finishing and light machining tasks. Is the SAIM-600XYG suitable for retrofitting existing machines? Yes, the compact dimensions (600 x 240 mm, 143 mm height) make the SAIM-600XYG appropriate for retrofit installations where precise two-axis movement is required without major machine modification. Which operations benefit most from this table? Operations that demand stable clamping and precise offsets—such as drilling in exact grids, small-series milling and alignment tasks—benefit from the rigidity and repeatability of the SAIM-600XYG. Are technical drawings available to plan mounting and fixtures? Technical drawings and model illustrations are included among the product assets to support mounting layout and fixture design for rapid integration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x240 Cross Slide Table Precision XY Stage, 120mm Height - SAIM
Take advantage of a compact, stable positioning stage that combines a generous 600 x 240 mm platform with a low-profile 120 mm height for flexible bench-top integration. The solid mass and smooth two-axis travel ensure dependable precision and repeatability in machining, drilling and inspection tasks. Order the SAIM-600XY directly via Metav Werkzeuge or ask our consultants for application advice. SAIM-600XY Cross slide table — 600 x 240 mm platform, 120 mm height The SAIM-600XY is a precision cross slide table designed for accurate two-axis positioning in machining, drilling and inspection setups Cross slide table 600 x 240 mm platform 120 mm total height for low-profile setups Solid 52 kg construction for stability Smooth precision XY movement for accurate positioning Stability that improves machining outcomes The substantial mass of the stage gives notable stability during cutting and measurement operations. At 52 kg, the body resists chatter and micro-movements, which translates into better surface finish and reduced rework. For setups where consistent positioning and repeatability matter, the robust construction supports tighter tolerances and steadier clamping. This contributes directly to higher output quality and fewer process interruptions in daily workshop routines. Compact dimensions for flexible bench integration The platform size of 600 x 240 mm combined with a 120 mm overall height provides a compact footprint without sacrificing usable surface area. This balance makes the stage suitable for machining centres, drill rigs and inspection benches where space is at a premium. A reduced height simplifies access for tooling and fixturing while maintaining a stable working plane, helping to streamline set-up times and improve ergonomic handling in the workshop environment. Accurate two-axis control for fine positioning As a two-axis positioning stage, the unit delivers precise lateral and longitudinal adjustment to align parts for machining or measurement tasks. The design supports fine incremental moves and reliable lock-in at the required coordinates, enhancing process accuracy and component interchangeability. Clear precision in lateral positioning reduces the need for repeated adjustments and helps maintain cycle-time consistency across serial operations. Practical servicing and workshop suitability The straightforward mechanical concept of this cross slide table keeps wear points accessible and maintenance procedures simple, supporting long-term reliability in busy toolrooms. Its form factor and mass make it especially suited to industrial and craft environments that demand a durable positioning stage for repeated clamping and repositioning. For technical clarifications or help specifying integration into existing workflows, Metav offers expert guidance from its Emmerich facility. Speak to Metav Werkzeuge about the SAIM-600XY cross slide table — Metav Werkzeuge can advise on suitability for specific applications and arrange delivery from Emmerich to the workshop Technical data Article number: SAIM-600XY GTIN: 4061905082320 Manufacturer: SAIM Dimensions & weight Platform: 600 x 240 mm Height: 120 mm Weight: 52 kg eClass: 21041714 Features Cross slide table / two-axis positioning Suitable for machining, drilling and inspection benches Product image and technical drawing available (saim240x-xy-modelle.jpg; saim-240x-technische-zeichnung.jpg) FAQ What are the exact platform dimensions of the table? The platform measures 600 x 240 mm and the overall height is 120 mm for the SAIM-600XY cross slide table. How heavy is the unit and what does that mean for stability? Weighing 52 kg, the SAIM-600XY offers substantial mass that improves vibration damping and stability during machining and inspection tasks. Which applications suit this cross slide table best? The SAIM-600XY is designed for machining, drilling and precision inspection work where precise two-axis positioning is required. Are visual and technical drawings available for integration planning? Yes, product imagery and a technical drawing are available (see saim240x-xy-modelle.jpg and saim-240x-technische-zeichnung.jpg) to support workshop integration and fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x240 Cross Table Precision Positioning Table, 93.5mm Height - SAIM
Take advantage of precise positioning, a compact 600 x 240 mm working surface and a low profile that integrates cleanly with bench and machine tables; the robust mass ensures stable machining results. Order the unit directly via Metav Werkzeuge or request tailored application advice from our specialists. SAIM-600X Cross Table — 600 x 240 mm table surface, 93.5 mm low profile The SAIM-600X is a compact cross slide designed for precise manual repositioning of medium-sized workpieces in milling, drilling and general workshop applications. 600 x 240 mm table surface Precise manual cross travel Low profile — 93.5 mm overall height Stable mass of 43 kg Precise positioning in a compact footprint The cross slide offers a 600 x 240 mm working area that enables accurate placement of clamped parts without occupying excessive bench space. Its low profile (93.5 mm) helps maintain the original spindle-to-workpiece distance on many machines, which keeps tooling geometry predictable and reduces the need for complex re-fixturing. The relatively heavy construction (approx. 43 kg) dampens vibration during light milling and drilling, which translates directly into improved surface finish and repeatability for short production runs or prototype work. How the mechanism improves workflow and reduces setup time A manual cross table provides orthogonal movement across two axes, enabling incremental repositioning and simple coordinate work without repeated re-clamping. This type of table turns multi-operation tasks into a series of accurate steps: align, clamp, advance along the axis, and perform the next cut or drill. The result is measurable time savings on tasks that require precision increments rather than full CNC automation. For shops focused on small-batch production or frequent changeovers, the functionality of a compact cross slide boosts throughput while retaining operator control. Reliability, compatibility and the Metav advantage The SAIM-600X is conceived for everyday use in metalworking and general workshop environments where precision and stability matter. The product specification focuses on core mechanical characteristics to ensure dependable performance with standard clamping systems and fixtures. Backing this hardware is Metav’s commitment to accessible precision: a broad product range, consistent availability from Emmerich and decades of experience mean dependable supply and informed product selection. For purchasers seeking predictable quality and reduced supplier complexity, this cross slide aligns with those operational goals. Contact Metav Werkzeuge today for detailed compatibility checks or to discuss how the SAIM-600X cross table can be configured for specific machine set-ups; Metav’s technical consultants are available by phone and email to support specification and order processing Technical data Article number: SAIM-600X GTIN: 4061905082313 eClass: 21041714 Facts Table surface: 600 x 240 mm Overall height: 93.5 mm Mass: 43 kg Special features Product type: Cross table Available assets: technical drawing and product image Label: Kreuztisch FAQ What workpiece size is the table suitable for? The 600 x 240 mm table surface is intended for medium-sized components and fixtures where precise, incremental repositioning is required; the SAIM-600X suits jobs that do not need a large-format table. What is the overall height and why is it important? Overall height is 93.5 mm; a low profile helps maintain the original spindle-to-workpiece distance and reduces the need for additional setup adaptations. How heavy is the unit and what is the benefit? The unit weighs approximately 43 kg; the mass helps dampen vibration and contributes to steadier cutting and drilling conditions. Is the cross table suitable for milling and drilling operations? Yes — the cross table is designed for precise manual positioning in typical milling and drilling workshop tasks, enabling repeatable incremental movements across two orthogonal axes. Are mounting accessories included? Delivery contents are not specified in the product data; accessories and clamping hardware should be verified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Slide Table Precision Cross Table, 144mm Height - SAIM
Benefit from a stable 800 x 280 mm platform, a low 144 mm profile and a substantial mass of 93 kg for reliable positional stability; order the SAIM-800XY directly via Metav Werkzeuge or consult our advisors for tailored guidance. SAIM-800XY — XY cross table with 800 x 280 mm platform The SAIM-800XY is a compact XY cross table designed for precise positioning in machining, inspection and assembly tasks. Large 800 x 280 mm travel area Low profile 144 mm for tight setups Heavy 93 kg mass for reduced vibration Stable, compact base for repeatable positioning The cross slide is built around a generous 800 x 280 mm platform and a low 144 mm overall height, which together provide a compact footprint while maintaining a stable working surface. The substantial mass of 93 kg dampens vibrations and supports repeatable results on milling machines, drill presses or inspection benches. For workshops and light production, this combination of scale and solidity reduces micro-movements during cutting or measurement operations, improving process consistency without requiring additional fixture mass. Smooth XY handling that shortens setup time Manual longitudinal and transverse adjustments on the table enable controlled incremental movement and fast coarse positioning. The design supports precise incremental shifts for alignment and repeat operations, translating into fewer tool changes and less time lost to re-clamping. Where accurate relative movement is required between operations, the XY slide ensures predictable motion; this simplifies workflow planning and contributes to measurable gains in productivity on small to medium batch runs. Easy integration and professional documentation The low-profile frame and standard mounting pattern make the unit straightforward to install on conventional machine tables or measurement platforms; no bespoke alterations are necessary in most cases. Technical drawings and gallery images are provided for planning and fixture layout, supporting rapid integration into existing setups. The robust construction also reduces the frequency of alignment checks, helping to maintain uptime and protect downstream processes from position-related rework. For secure, precision positioning in workshop and light production environments, request a technical quote for the SAIM-800XY from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options. Technical data Article number: SAIM-800XY GTIN: 4061905082429 eClass: 21041714 Label: Kreuztisch Manufacturer: SAIM Dimensions & weight Top platform: 800 x 280 mm Height: 144 mm Weight: 93 kg Versions & features Type: XY cross table Model designation: SAIM-800XY Gallery images and technical drawing available FAQ What are the travel dimensions of the table? The SAIM-800XY provides a travel area of 800 x 280 mm, suitable for medium-format fixtures and workpieces. Is the table suitable for use on a milling machine? Yes, the cross table is designed for machining and inspection environments and mounts easily on standard machine tables. How does the mass affect performance? The 93 kg mass of the SAIM-800XY increases stability and vibration damping, which improves repeatability during cutting and measuring operations. Are technical drawings available for planning? Technical drawings and gallery images are provided to assist with fixture design and integration for the SAIM-800XY. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Movement, 115.5mm Height - SAIM
Take advantage of a stable, compact positioning solution that combines a large 800 x 280 mm working surface with a solid 75 kg construction for improved vibration damping and repeatable alignment; order directly via Metav Werkzeuge or consult their specialists for integration support. SAIM-800X Cross Slide Table — 800 x 280 mm working surface, 75 kg mass The SAIM-800X is a robust cross slide table designed for precise positioning tasks in machine-shop and inspection environments, offering a compact footprint and stable support for medium-sized workpieces. 800 x 280 mm working surface 75 kg solid base 115.5 mm overall height Precise positioning through mass and surface area A heavy base is a decisive advantage when repeatability matters: the 75 kg mass significantly reduces vibration during machining and measurement, which improves positional accuracy and surface finish. The 800 x 280 mm working surface provides sufficient room for fixturing medium workpieces or tooling, enabling secure clamping without excessive overhang. By combining mass with a well-proportioned top, the unit supports consistent results across repeated cycles — an important factor for production runs and quality-controlled inspection procedures. Reference drawings in the gallery support exact mounting planning. Low profile for straightforward integration into setups A compact overall height of 115.5 mm gives the table a low profile that simplifies integration into milling, drilling or inspection stations without major modification to fixtures. The modest vertical dimension helps keep the clamping centre close to the machine spindle axis or measuring plane, reducing lever forces and improving stability. The available technical drawing and product images support planning for mounting points and alignments, so customers can assess fitment before installation and reduce setup time on the shop floor. Designed for workshop and production use Classified under eClass 21041714, this cross slide table is intended for positioning and machining tasks common in industrial workshops. The construction and weight promote damping and stable form-holding during light to medium machining or measurement processes. The design is straightforward, lending itself to use as a dedicated fixture plate, a component of a measuring station, or an auxiliary table on drilling and milling stands. The compact footprint and robust build together support reliability in daily production use, increasing machine uptime and consistency. Contact Metav Werkzeuge for tailored advice on integrating the SAIM-800X into existing production lines — technical drawings and delivery from Emmerich are available; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SAIM-800X GTIN: 4061905082412 Product: Cross slide table Manufacturer: SAIM Facts Table top: 800 x 280 mm Weight: 75 kg Height: 115.5 mm eClass: 21041714 Features & resources Heavy mass for improved damping Compact, low-profile design Technical drawing and gallery available Suitable for positioning, fixturing and inspection setups FAQ What size of workpiece fits comfortably on this table? The SAIM-800X cross slide table (SKU SAIM-800X) has an 800 x 280 mm working surface, which accommodates medium-sized components and offers room for standard fixturing and clamps. Is the table suitable for use with a milling machine for light machining? Yes, the table’s solid construction and 75 kg mass provide enhanced damping and stability suitable for light to medium machining tasks and positioning duties. Are technical drawings available to plan installation? Technical drawings and gallery images are provided for the SAIM-800X to assist with precise mounting and integration into existing setups. What classification or standard identifies the product type? This unit is listed under eClass 21041714, identifying it as a positioning/slide table suitable for workshop and production use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Positioning Stage, 173mm Height - SAIM
Take advantage of the 800 x 280 mm work platform and the 108 kg mass for enhanced stability and precise X–Y positioning; the low-profile 173 mm stage reduces vertical build while delivering a steady work surface for machining tasks. Order the SAIM-800XYG cross table directly via Metav Werkzeuge or ask our consultants if needed. SAIM-800XYG cross table — precision X–Y stage with 800 x 280 mm platform SAIM-800XYG is a compact, heavy-duty cross table designed to provide accurate X–Y movement for machine-shop and tooling applications, offering a broad work surface within a reduced vertical envelope. 800 x 280 mm work platform Robust 108 kg construction Low 173 mm profile for tight setups Increased stability for consistent machining results A heavier stage mass improves damping of cutting forces and vibration; the 108 kg construction of this cross table provides a stable base that reduces chatter and helps maintain surface finish quality. The 800 x 280 mm platform gives ample room for medium-sized fixtures and components, allowing clamping solutions to be placed without compromising access. Stability is a direct contributor to reproducible outcomes, making the stage suitable where repeatable positioning and finish are priorities. Clear, measurable stability reduces scrap rates and supports efficient production planning. Compact design that simplifies integration The low profile of just 173 mm minimises the required vertical clearance, which is particularly useful when retrofitting into existing milling or inspection setups. A compact stage profile permits closer tool approaches and can simplify chip evacuation and guarding arrangements. Because the unit is presented as a standalone X–Y stage, integration into workbenches, rotary tables or fixture systems can be planned without extensive machine modification. For customers requiring precise dimensional matching, Metav Werkzeuge offers consultation to verify compatibility with intended machines and fixtures. Precise X–Y positioning to speed up workflows Engineered as a cross table for exact lateral movement, this stage focuses on delivering reliable positional control for machining, drilling and inspection tasks. Fine adjustment reduces the need for repeated clamping and rework, increasing throughput in jigs and small-batch production. The combination of a generous work surface and a substantial mass supports both positional stability and handling of varied workpiece geometries. For workshop managers, the outcome is a tangible improvement in setup efficiency and a reduction in cycle variation across serial tasks. Contact Metav Werkzeuge for advice on integrating the SAIM-800XYG into current machinery or to request detailed drawings and delivery options; Metav Werkzeuge can support specification checks from Emmerich with direct phone and email assistance. Technical data Article number: SAIM-800XYG GTIN: 4061905082443 eClass: 21041714 Facts Platform dimensions: 800 x 280 mm Weight: 108 kg Height: 173 mm Special features Product type: Kreuztisch / cross table Manufacturer: SAIM Suitable for machine-shop positioning and workholding FAQ What are the primary dimensions of the stage and how much mass does it offer? The SAIM-800XYG features an 800 x 280 mm work platform and a mass of 108 kg, providing a broad, stable surface for fixtures and components. Is the cross table suitable for retrofitting into existing milling machines? Yes. The low 173 mm profile is intended to ease integration into many machine and fixture configurations; Metav Werkzeuge can assist with compatibility checks. For which workshop tasks is this cross table best suited? The stage is aimed at precision X–Y positioning tasks such as milling, drilling and inspection where stability and repeatable lateral movement are required; it supports medium-sized workpieces on its 800 x 280 mm platform. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Stage, Height 114.5mm - SAIM
Combining a robust 80 kg construction with a compact 800 x 280 mm platform and a low-profile 114.5 mm height, the SAIM-800XG delivers stable, repeatable positioning for machine-tool and workshop applications. Order the cross table directly via Metav Werkzeuge or consult our specialists for integration and delivery guidance. SAIM-800XG cross table — 800 x 280 mm platform, 114.5 mm height The SAIM-800XG is a compact cross table engineered for precise XY positioning in workshop and machine-tool environments. Robust 80 kg construction Platform 800 x 280 mm travel Low-profile 114.5 mm height Ideal for machine-tool positioning Stable positioning that improves process reliability The compact cross table provides a mechanically stable base for precise part positioning. Its platform dimensions of 800 x 280 mm allow secure clamping of components while the substantial 80 kg mass reduces sensitivity to external vibration. In practical terms, a heavier stage translates into fewer micro-movements during machining and measurement, which supports consistent repeatability in serial operations. The construction is intended to integrate with standard machine tables and fixturing systems, enabling improved throughput without complex auxiliary supports. Compact design for easy integration and efficient workflows A low-profile 114.5 mm height keeps the working envelope minimal, facilitating integration under toolheads and within measurement setups where vertical space is restricted. The reduced overall height helps maintain a short tool overhang and optimised centre-of-gravity for mounted parts, which can contribute to smoother axis motion in production flows. The cross-slide concept (an XY stage) concentrates travel where it is needed, making it particularly suitable for retrofits, assembly jigs and small-batch production where floor space and machine compatibility matter. Clear documentation and application-ready details Technical drawings and gallery images are supplied to support planning and machine integration. The presence of a detailed technical drawing allows planners to check mounting interfaces and clearances before installation, reducing lead times and installation uncertainties. The SAIM-800XG is presented as an industrial-grade positioning solution with emphasis on precision, stability and straightforward adaptation to workshop and manufacturing environments. Specification-based decision-making is supported by the available product documentation and numerical data. For specification checks, delivery timing or integration advice, contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss how this cross table fits existing equipment and workflows. Technical data Article number: SAIM-800XG GTIN: 4061905082436 Facts Platform dimensions: 800 x 280 mm Height: 114.5 mm Weight: 80 kg eClass: 21041714 Special features Cross table / XY stage design Suitable for machine tool positioning Technical drawing and gallery images available FAQ What are the main dimensions of the stage? The platform measures 800 x 280 mm, with an overall height of 114.5 mm, making it suitable for compact integration into machine tables. How much does the unit weigh and why does that matter? The stage weighs 80 kg; the mass contributes to vibration damping and improved positional stability during machining and measurement. Is the SAIM-800XG suitable for machine-tool retrofits? Yes, the SAIM-800XG cross table is designed for integration with machine tools and workshop fixtures, supported by technical drawings for mounting checks. What documentation is available to support installation? A detailed technical drawing and gallery images are provided to verify mounting clearances and plan fixture attachment for the SAIM-800XG. Which applications are best suited to this cross table? The stage is suited to precision positioning tasks such as small-part machining, measurement setups and assembly fixtures where a compact, stable XY solution is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Mini-Kreuztische 150-400mm
Mini-Kreuztisch | Koordinatenmesstisch - Fühlernocken - Handrad mit Sicherheitmutter - Kühlmittel-Quernut bei Modellen 430/600/800/1000 - Schmierung der Führungsbahnen - Späne-Schutzschuld aus PVC - Abdeckung der Führungsbahnen und SpundelnTechnische Daten- Tischgröße: 150x100mm- Verschiebung (X): 75mm- Verschiebung (Y): -mm- Höhe (C ): 50,5mm- Basis (D): 100mm- Basis (E ): 100mm- "T" Slots G: 65mm- "T" Slots N°: 2- "T" Slots F: 8mm- "T" Slots I: 12mm- "T" Slots J: 5mm- "T" Slots K: 5mm- Abstand für Befestigung (M): 68mm- Breite der Befestigungsmöglichkeit (N): 7mm- Durchmesser Handrad (P): 36mm- Bewegung je Umdrehung Handrad: 1,75mm- Ablesung: 0,05mm- Gewicht: 4kg- Max. Beladung Tisch: 30kg
Make complex drilling and milling accurate and repeatable
Cross tables (also called coordinate table or x‑y table) are precision mechanical positioning units designed to deliver stepless, controlled movement along orthogonal X and Y axes. Primarily used as an upgrade for bench drills, pillar drills and conventional milling machines, these tables align the clamped workpiece exactly under the rotating tool or permit precise linear milling passes for coordinate-based machining.
How they work and where they pay off
The basic construction uses two stacked, robust slides running on adjustable, low‑play dovetail or linear guides, ensuring high stiffness and resistance to tilting even under strong radial cutting forces. Slide motion is driven by sturdy trapezoid screws or ball screws, traditionally hand-operated via finely graduated handwheels with vernier rings for hundredths of a millimetre; modern variants are commonly fitted with DRO readouts or servomotor‑driven CNC systems for semi‑automated operation. Worktops are usually made from vibration‑damping grey cast iron and feature standard t‑slots for rapid, secure fixturing.
Tangible benefits for production
- Increased process reliability: precise coordinate positioning reduces re‑fixturing and human error
- Faster setup times: repeatable, indexed movements minimise machine downtime
- Versatile machining: enables complex drilling patterns, pass‑drilling and linear milling without reorientation
- Robust design: high stiffness and tilt resistance maintain accuracy under load
- Flexible integration: manual, DRO and CNC drive options for different automation levels
A dependable partner for sourcing and service
Metav provides a pragmatic supply route for cross tables and associated tooling, blending years of specialist know‑how with a broad stock profile. Metav’s approach democratises precision: a European quality filter based in Emmerich, trusted by over 48,000 customers and offering more than 250,000 products to simplify procurement and ensure steady availability for industry and trade.
Technical data (key points)
- precise, stepless X and Y movement
- suited to bench drill, pillar drill, conventional milling machines
- two stacked slides on adjustable dovetail or linear guides
- drive: trapezoid screw or ball screw
- manual handwheels with vernier to 0.01 mm; optional DRO or servo/CNC drive
- work surface: vibration‑damping grey cast iron with standard t‑slots
- designed for high stiffness and tilt resistance under radial cutting forces
FAQ
Which machines can cross tables be fitted to?
Cross tables are intended for integration with bench drills, pillar drills and conventional milling machines as coordinate positioning accessories or as integral units for machining centres.
How is positioning achieved and what aids accuracy?
Positioning is achieved via mechanical slides driven by trapezoid or ball screws; accuracy is supported by adjustable, low‑play dovetail or linear guides, vernier handwheels and optionally by DRO or CNC feedback systems.
What clamping options do cross tables offer?
Worktops with standard t‑slots permit direct, force‑locked mounting of machine vises, clamping jaws and special fixtures for repeatable, secure part holding during drilling and milling.
Are cross tables suitable for heavy cutting operations?
Yes. The combination of robust slide geometry, high‑stiffness guideways and appropriate screw drives ensures reliable performance and minimal deflection under significant radial cutting forces.
How does Metav support selection and supply of cross tables?
Metav curates a wide assortment of coordinate solutions and accessories from entry‑level manual units to DRO and CNC‑ready tables, backed by a logistics and quality filter from Emmerich for consistent availability and expert advice.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com