Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 060202 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide and a rhombic CCMT geometry for stable cutting and extended tool life; the 7° clearance and 0.2 mm corner radius support consistent surface quality in turning operations. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. CCMT 060202 AH8015 — ISO rhombic turning insert by Tungaloy The CCMT 060202 AH8015 is an ISO rhombic indexable insert for external and internal turning, optimised for general machining of heat-resistant alloys. CCMT 06 ISO rhombic insert PVD-coated AH8015 carbide grade 7° clearance angle for secure cutting 0.2 mm corner radius, single-sided chipbreaker Consistent cutting performance for heat-resistant alloys The CCMT 060202 AH8015 insert pairs a PVD-coated surface with a carbide substrate to deliver balanced wear resistance and edge stability when machining heat-resistant alloys. The PVD layer forms a hard, thermally stable barrier that reduces adhesive and abrasive wear; this enables more consistent tool life under elevated cutting temperatures. As a result, users can expect predictable performance across batches and fewer unscheduled index changes, which supports smoother production workflows and reduced scrap rates. Geometry and clamping that ensure repeatable results The ISO rhombic shape with an 80° included angle and a 7° clearance angle provides a versatile cutting profile that suits both roughing and finishing passes when matched to the correct holder. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; secure fixation is achieved via the cylindrical hole with a single-sided countersink (40°–60°). Because the insert integrates into a complete system — insert, corresponding external holder or boring bar, backing/clamp set and replacement screws — set-up repeatability and process stability improve, reducing variability in component dimensions. Match cutting strategy to the insert’s strengths for efficiency Selecting the one-sided chipbreaker and the AH8015 grade according to workpiece material, cutting mode and machine stability optimises productivity. The modest 0.2 mm corner radius supports superior surface finish on finishing passes while still allowing small depths of cut for accurate profiling. For heavy material removal, choose a chipbreaker and cutting parameters that favour robust edge support; for fine finishing, reduce feed and exploit the insert’s edge stability to achieve the desired Ra values. The PVD coating also permits higher cutting speeds than uncoated grades in many heat-resistant alloys, contributing to a favourable productivity-to-cost ratio. Practical workshop advantages and further support Indexable inserts such as this one reduce downtime through quick indexing and simple inventory management of replacement inserts. The combination of a proven carbide substrate and a modern coating yields reliable, repeatable machining and longer intervals between insert changes, supporting sustained throughput in batch or continuous production. If additional technical data or cutting recommendations are required, Metav Werkzeuge provides application support — technical enquiries can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored parameter guidance. Contact Metav Werkzeuge for availability and tailored tooling recommendations for the Tungaloy CCMT 060202 AH8015 insert; technical advice and order support are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6951125 SKU: 6951125-Tungaloy Manufacturer SKU: TUN6951125 Manufacturer: Tungaloy ISO designation: CCMT060202 Core data Included angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: 2.38 mm Size designation: 06 Material & special features Carbide substrate, PVD-coated (AH8015) One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO indexable insert for turning Suitable for external and internal turning System components: matching holder or boring bar, backing/clamp set and replacement screws FAQ Which materials is this insert best suited for? The AH8015 grade of the CCMT 060202 AH8015 insert (SKU 6951125-Tungaloy) is specified as a first choice for the general machining of heat-resistant alloys while offering balanced wear resistance and edge stability. Can the insert be used for both external and internal turning? Yes, the insert’s rhombic CCMT geometry and available hole/countersink configuration make it suitable for both external turning and internal boring operations when paired with the correct holder. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius on the CCMT 060202 AH8015 provides improved edge strength for finishing passes and supports a fine surface quality, while limiting the maximum achievable feed for high-precision profiles. What advantages does the PVD coating bring for production? The PVD-coated AH8015 substrate increases resistance to adhesive and abrasive wear and improves thermal stability at the cutting edge, which helps to extend tool life and maintain consistent machining results. What clamping or system components are required to use this insert? Secure use of the CCMT 060202 AH8015 insert requires a compatible CCMT external holder or boring bar, a backing/clamp set and the appropriate replacement screws; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a coated cermet grade for superior surface finish and a compact 0.2 mm corner radius for reliable turning performance; order originals via Metav Werkzeuge or consult the team for application-specific data. CCMT 060202 AT9530 — Turning insert by Tungaloy A CCMT060202 AT9530 rhombic indexable insert for finishing and light turning of steel, designed for ISO‑conforming holders and stable surface results. ISO‑conforming rhombic insert Coated cermet grade AT9530 0.2 mm corner radius for fine finishes With cylindrical hole and single‑side countersink Precision finish and predictable wear for fine turning The AT9530 coated cermet composition is engineered for finishing and light machining of steel, prioritising a consistent surface finish and even wear progression. Cermet grades combine ceramic hardness with metallic toughness to reduce built‑up edge and deliver a polished workpiece without aggressive machining parameters. For production environments where part appearance and tolerances matter, the material pairing of the insert and cutting geometry reduces rework and helps maintain repeatable results over multiple indexings. Secure compatibility and clamping for series production This indexable plate follows ISO geometry for rhombic inserts, so compatibility with external holders is determined by insert form, relief angle and dimensional tolerances. The plate has a 7° relief angle, an included angle of 80° and a cylindrical hole with a single‑side countersink (40°–60°) to ensure secure clamping and accurate seating. The 2.38 mm plate thickness and rhombic shape provide stable support in the pocket, which reduces vibration and supports consistent chip formation during long production runs. Geometry and chip control that boost cycle efficiency A 0.2 mm corner radius combined with a single‑side chipbreaker addresses the needs of fine finishing: smaller tool radii reduce cutting forces and surface waviness, while an appropriate chipbreaker helps evacuate chips cleanly without sacrificing edge life. The carbide substrate and the cermet coating work together to resist micro‑chipping at the cutting edge, prolonging the usable life of each index and reducing the frequency of tool changes — a direct contributor to higher machine uptime and lower production cost per part. Practical application notes and selection guidance Designed for both external and internal turning operations, the plate is most effective when matched to a holder that suits its rhombic form and ISO seat. Select the AT9530 grade and the single‑side chipbreaker for applications where surface integrity and uniform wear are primary objectives. For heavier cuts or interrupted machining, consider a different geometry or grade optimised for roughing; for fine finishing, the supplied geometry and coating consistently produce improved part appearance with modest cutting data. For assistance selecting the correct holder or cutting parameters, technical consultation is available to support integration into existing toolsets. Contact Metav Werkzeuge for application‑specific cutting data and to source genuine Tungaloy CCMT inserts for reliable finishing performance Technical Data Article number: 6773727 Manufacturer SKU: TUN6773727 Model series: ISO turning indexable inserts Designation: CCMT060202 AT9530 Material: Carbide (coated cermet) Manufacturer: Tungaloy Core specifications Insert size: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Hole style: cylindrical hole + single‑side countersink (40°–60°) Features & Applications Coated cermet grade AT9530 One‑sided chipbreaker For finishing and light turning of steel ISO‑conforming rhombic geometry Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for finishing steels? Yes. The CCMT060202 AT9530 Tungaloy indexable insert (SKU 6773727‑Tungaloy) is specifically developed for finishing and light turning of steel where surface quality and uniform wear are required. Which holder type is required for correct seating? A holder designed for ISO‑rhombic CCMT inserts with the matching seat geometry and clamp will secure the plate; correct seating depends on form, relief angle, tolerance class, fastening and plate thickness. What advantages does the 0.2 mm corner radius offer? A 0.2 mm corner radius reduces cutting forces and surface waviness in finishing operations, improving part appearance while maintaining acceptable edge strength for light cuts. Can the insert be used for internal turning? Yes. The geometry and chip control make the insert suitable for both external and internal turning, provided that a stable setup and an appropriate holder are used. How does the AT9530 grade affect tool life and finish? The AT9530 coated cermet grade offers balanced wear resistance and edge stability for improved surface finish and predictable wear, which supports longer intervals between indexings. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060202 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds, exceptional wear resistance and secure clamping for a reliable turning process; the DX120 polycrystalline diamond grade delivers long tool life and consistent surface quality when machining aluminium and other non‑ferrous materials. Order the insert directly via Metav Werkzeuge or request tailored advice from the technical team. CCMT060202 DX120 Turning indexable insert (PCD) — Tungaloy A CCMT060202 DX120 insert engineered for high‑speed turning of aluminium, non‑ferrous and abrasive non‑metal workpieces ISO‑standard CCMT06 form for wide holder compatibility DX120 PCD for high cutting speeds and long tool life Rhombic geometry with 80° main cutting edge angle Cylindrical hole with one‑sided countersink for secure fixing Optimised machining of aluminium and non‑ferrous alloys The combination of polycrystalline diamond (PCD) in the DX120 grade and a rhombic CCMT06 form enables markedly higher cutting speeds and extended tool intervals when turning aluminium and similar materials. The PCD cutting layer offers outstanding abrasive wear resistance, which keeps the cutting edge sharper for longer and reduces the frequency of index changes. As a result, cycle times are shortened while surface quality remains consistent; this is particularly beneficial for batch production and precision components where repeatability matters. The single‑sided chipbreaker is designed to control chip form during interrupted or continuous cuts, helping to prevent build‑up and maintain process stability. Secure seating and precise geometry for repeatable results A well‑matched insert geometry directly influences vibration behaviour and dimensional constancy. The CCMT060202 form, with an 80° main cutting edge angle and 7° relief angle, together with a 2.38 mm insert thickness, provides stable engagement in standard external and internal turning holders. The insert’s 0.2 mm nose radius supports fine contouring without sacrificing edge strength. The central cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping in most ISO‑compatible holders and boring bars, reducing the risk of movement under load and improving repeatability from one index to the next. Long service life and economical machining performance PCD inserts such as this are particularly effective on abrasive non‑metals and soft metals where conventional carbide wears quickly. The DX120 grade is formulated to balance extreme hardness with fracture resistance, translating into prolonged cutting edge life and a lower cost per part over the tool lifetime. For operations that prioritise uptime and steady quality, this insert reduces tool change frequency and supports higher productivity rates without compromising finish. The ISO standardisation of the insert form also simplifies tool logistics and holder selection, supporting efficient workshop planning and predictable process outputs. For machining enquiries or to secure a supply of the Tungaloy DX120 CCMT060202 insert, contact Metav Werkzeuge for application advice or ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6822151 SKU: 6822151-Tungaloy Manufacturer item no.: 6822151 Model series: ISO‑Drehwendeschneidplatten Designation: CCMT060202 DX120 Tungaloy‑Wendeplatte Core specifications Insert size: 06 ISO designation: 060202 Insert thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 7° Main cutting edge angle: 80° Features & compatibility Cutting material: polycrystalline diamond (PCD) Grade: DX120 Plate shape: rhombic (CCMT) Chipbreaker: single‑sided Hole style: cylindrical hole + one‑sided countersink (40°–60°) Typical application: turning (external and internal) Compatibility: ISO‑standard holder form, tolerance and clamping dependent FAQ Which materials are best suited to this insert? The CCMT060202 DX120 insert is intended for aluminium, other non‑ferrous metals and abrasive non‑metal workpieces; the DX120 PCD grade provides high wear resistance during these applications. Is this insert compatible with standard CCMT pockets? Yes — the CCMT060202 designation follows ISO sizing; compatibility depends on holder form, free clearance, tolerance class, clamping type and insert thickness. Can the insert be used at elevated cutting speeds? DX120 PCD is formulated to enable high cutting speeds while maintaining tool life, making the insert suitable for productive turning operations. How does the cylindrical hole and countersink benefit clamping? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure fixing in many ISO‑compatible holders and reduces the likelihood of insert movement under cutting loads. What finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius offers a good compromise between edge strength and the ability to produce fine surface finishes, especially for turning operations requiring detail or tight tolerances. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060202 GH730 Wendeplatten - Tungaloy
Benefit from the combination of GH730 wear resistance, ISO conformity and a compact 0.2 mm nose radius for consistent turning quality; order the insert directly via Metav Werkzeuge or consult our specialists if application advice is required. CCMT 060202 GH730 — Tungaloy turning insert (ISO CCMT, 0.2 mm radius) A CCMT060202 GH730 indexable insert designed for ISO-conforming turning operations, offering stable chip control and reliable edge life in a compact rhombic form. ISO CCMT form, compatible with standard holders GH730 grade: wear-resistant and edge-stable 0.2 mm nose radius for fine turn finishes Cylindrical hole with 40°–60° countersink Longer tool life and stable machining through optimised grade and substrate The GH730 grade from Tungaloy provides a balanced combination of wear resistance and toughness on a cemented carbide substrate, which translates into fewer insert changes and more consistent cycle times. In practice, this means a predictable production rhythm: inserts retain a stable cutting edge under varying loads and chip conditions, reducing unplanned stops and rework. The ISO-conforming geometry supports straightforward replacement and uniform clamping forces in approved holders, allowing process planners to rely on repeatable performance rather than constant parameter adjustments. Improved surface finish and dimensional control with proven geometry A small 0.2 mm nose radius combined with an 80° included angle and a 7° clearance creates a cutting geometry that favours fine surface finishes while maintaining dimensional accuracy. The modest nose radius reduces radial forces during light finishing passes, helping to avoid chatter and produce tighter tolerances; at the same time the plate thickness of 2.38 mm increases stiffness for stable cuts. The rhombic plate shape and the single-sided chipbreaker support predictable chip formation when the breaker and grade are selected to match workpiece stability and machining strategy, which means better first-pass yields and less polishing or rework. Seamless integration into existing turning systems and clear selection criteria As an ISO-designated CCMT insert, the part integrates into a standard system: indexable plate, matching external holder or boring bar, shim/clamping set and replacement screws. Compatibility with a chosen holder is governed by plate form, clearance angle, tolerance class, fastening type, size and thickness, so selection procedures remain straightforward. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure secure clamping and concentricity. For shops seeking predictable cycle times and easier tool management, the standardised format reduces setup complexity and inventory variants while maintaining flexibility through chipbreaker and grade choice. Contact Metav Werkzeuge today for application guidance on the Tungaloy GH730 turning insert or to request tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6820959-Tungaloy Manufacturer article number: 6820959 Manufacturer SKU: TUN6820959 Product name: CCMT060202 GH730 Tungaloy indexable insert Facts Nose radius: 0.2 mm Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 ISO designation: 060202 Special features Cemented carbide substrate Grade/coating: GH730 Single-sided chipbreaker Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) ISO CCMT turning insert designed for turning operations Compatibility determined by form, clearance, tolerance, fastening, size, thickness System components: insert, external holder or boring bar, shim/clamping set, spare screws FAQ What applications is this insert intended for? The CCMT060202 GH730 is intended for turning operations; the grade and chipbreaker should be selected to suit the workpiece material, machining type and setup stability. How does the GH730 grade affect process stability? GH730 provides a balanced mix of wear resistance and toughness on a cemented carbide substrate, which helps the insert maintain edge stability over longer runs and supports dependable cycle times with fewer interruptions. Which holder features must be checked for compatibility? Compatibility depends on plate form, clearance angle, tolerance class, fastening type, size and thickness; confirm these criteria with the chosen external holder or boring bar before fitting the insert. What does the 0.2 mm nose radius mean for surface finish? A 0.2 mm nose radius produces finer surface finishes and reduced radial cutting forces in finishing passes, improving tolerance control and lowering the need for subsequent polishing. What clamping design does the insert use? The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to secure the insert reliably in approved clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 GH730 Wendeplatten - Tungaloy
Benefit from the combination of GH730 wear resistance and the ISO CCMT geometry for consistent, repeatable turning results; compatibility with standard ISO holders reduces setup time and inventory complexity. Order the insert directly via Metav Werkzeuge or request selection advice from Metav Werkzeuge consultants. CCMT 060202 GH730 Tungaloy – ISO turning insert for external and internal turning, rhombic form The CCMT 060202 GH730 Tungaloy is an ISO rhombic turning insert designed for general turning applications where a balance of wear resistance and edge stability is required. CCMT 060202 geometry for ISO holders GH730 grade for wear resistance and toughness 0.2 mm nose radius for precise profiles Cylindrical hole with single-side countersink Consistent cutting performance through optimised grade and geometry The combination of the GH730 carbide grade and the standard CCMT geometry delivers a dependable mix of wear resistance and edge stability that supports productive turning cycles. The grade has been formulated to resist flank wear while retaining enough toughness to avoid premature chipping on interrupted cuts, which results in longer effective tool life and fewer insert changes. For production environments focusing on repeatability, this balance reduces unplanned downtime and contributes to more predictable process economics. Ease of integration with existing toolholders and reduced setup complexity The rhombic ISO form and the CCMT designation match common external and internal turning holders, so the insert fits into established tool systems without special adapters. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; selecting an ISO-compliant insert simplifies spare-part management and shortens setup time. The standardised geometry enables fast replacement and consistent clamping, which helps maintain concentricity and surface finish across batches. Practical features that improve machining results and chip control Key dimensional features include a 0.2 mm nose radius, 7° clearance angle and a plate thickness of 2.38 mm, which together influence profile accuracy, cutting forces and rigidity. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for secure fastening; this design supports consistent clamping force and repeatable seating. A one-sided chipbreaker helps control chip formation during conventional turning, aiding evacuation and reducing the risk of surface dings. These attributes make the insert suitable for a range of steels and alloyed materials when appropriate cutting parameters are chosen. Selection guidance and application context for process reliability This insert has been developed for turning operations and is best employed where a reliable compromise between productivity and edge life is desired. The rhombic form aids versatile approach angles, while the modest nose radius supports accurate profile work and fine finishes. When integrating into a cell or lathe, match the insert’s form and thickness to the holder’s specification and choose feed and speed to suit the material and stability of the setup. For uncertain cases, request technical data or sample trials to establish the ideal parameters for the intended workpiece and machining conditions. Request selection advice from Metav Werkzeuge for Tungaloy GH730 inserts or place an order through Metav Werkzeuge’s sales team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6820960 Manufacturer SKU: TUN6820960 SKU: 6820960-Tungaloy Designation: CCMT060202 Model series: ISO turning inserts Facts Angle: 80° Nose radius: 0.2 mm Clearance angle: 7° Thickness: 2.38 mm Size: 06 ISO code: 060202 Special features Grade: GH730 Material: carbide Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Plate form: rhombic Application: turning FAQ What materials is this insert suitable for? The CCMT 060202 GH730 Tungaloy insert is designed for turning; the GH730 grade provides a balance of wear resistance and toughness suitable for a range of steels and alloyed materials when appropriate cutting parameters are applied. How does the 0.2 mm nose radius affect the finish? A 0.2 mm nose radius on the CCMT 060202 improves profile accuracy and contributes to finer surface finishes while remaining robust enough for moderate feeds; it offers a compromise between sharp profiling and edge strength. What fastening does the insert require in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for secure clamping; the geometry matches standard ISO CCMT-compatible holders for reliable seating and repeatability. Is this insert interchangeable with other CCMT 060202 inserts? Yes, the ISO CCMT designation and dimensions mean the insert is compatible with holders designed for CCMT 060202 inserts, provided the holder supports the specified thickness and clearance angle. Which chip control can be expected from this grade and breaker? The one-sided chipbreaker on the GH730-grade insert promotes controlled chip formation for standard turning operations, aiding chip evacuation and protecting the workpiece surface under stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet GT9530 wear resistance and ISO‑compatibility for consistent finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. CCMT060202 GT9530 Tungaloy indexable insert for turning, ISO format, coated cermet The CCMT060202 GT9530 is an ISO‑format indexable turning insert by Tungaloy, designed for finishing to light universal turning applications where surface quality and stable tool life are priorities. Coated cermet GT9530 for long tool life ISO‑compatible rhombic insert One‑sided chipbreaker for controlled chips Cylindrical hole with single‑side countersink Consistent surface quality and prolonged service intervals The GT9530 grade is a coated cermet designed to deliver reliable surface finish in finishing and light‑duty turning of steel under stable conditions. The coating reduces flank and crater wear, which translates into longer tool life and fewer indexings. Because the insert is manufactured to ISO dimensions and tolerance classes, it ensures predictable seating and repeatable contact with the toolholder; this stability supports higher process efficiency and reduces the need for frequent nest adjustments. The modest 0.2 mm corner radius provides a balance between edge strength and the ability to produce fine finishes, while the single‑face chipbreaker stabilises chip formation during continuous cuts. Easy integration into ISO tooling systems for predictable performance Compatibility is governed by form, clearance angle, tolerance class, fastening style, size and thickness; the rhombic 06 size and 80° geometry match common external and internal turning holders. The insert’s cylindrical hole with single‑side countersink (40°–60°) enables secure clamping and consistent seat location, minimising vibration and micro‑movement. With a plate thickness of 2.38 mm and standard ISO designation, the insert fits established tooling systems without modification, simplifying stocking and reducing setup time in production environments that demand repeatable results. Practical recommendations for machining and selection For finishing and light general turning in steel, choose the GT9530 chipbreaker and grade to benefit from controlled chipflow and a smooth part surface; stable clamping and moderate feed rates further extend life and improve consistency. The rhombic shape and 80° approach angle make this insert suitable for both longitudinal turning and light profiling operations. When replacing an insert, match holder form and tolerance class to the ISO designation to preserve the intended geometry and maintain process reliability. For unstable setups or heavy interrupted cuts, consider more robust edge geometries or different grades; for stable conditions requiring superior finish, the GT9530 is a cost‑effective option. For applications prioritising finish and repeatability, specify the Tungaloy GT9530 insert and contact Metav Werkzeuge for tailored advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 for further technical information Technical data Article number: 6998289 Manufacturer SKU: TUN6998289 SKU: 6998289-Tungaloy ISO designation: CCMT060202 Grade: GT9530 Data Corner radius: 0.2 mm Approach angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features Rhombic plate form Cylindrical hole with single‑side countersink (40°–60°) One‑sided chipbreaker Coated cermet grade GT9530 ISO‑normed turning insert Intended application: turning FAQ What materials is this insert intended for? The CCMT060202 GT9530 insert is optimised as a finishing to light universal grade for steel applications, offering improved surface quality and extended life under stable cutting conditions. Is the CCMT060202 compatible with standard ISO holders? Yes. The insert follows ISO dimensions and tolerance classes; compatibility depends on holder form, clearance angle, fastening style and thickness to ensure correct seating. What does the GT9530 designation mean for performance? GT9530 denotes a coated cermet grade developed to provide wear resistance and consistent surface finishes during finishing operations with reduced flank wear. How does the chipbreaker affect machining? The one‑sided chipbreaker promotes controllable chip formation and evacuation, which helps maintain surface quality and reduces the risk of entanglement in continuous turning. Can the insert be used for internal turning? The rhombic geometry and 80° approach angle allow the insert to be used for both external and internal turning where tool access and holder geometry permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 GT9530 Wendeplatten - Tungaloy
The coated GT9530 cermet grade together with the ISO CCMT 060202 format delivers fine surface finish and extended tool life under stable turning conditions; order the insert directly via Metav Werkzeuge or consult our application specialists for optimum selection. CCMT 060202 GT9530 CCMT ISO turning insert for turning — Tungaloy The CCMT 060202 GT9530 is an ISO-format, rhombic turning insert in a coated cermet grade designed for finishing and light general-purpose turning of steel in stable machining setups. Coated cermet GT9530 for extended tool life ISO CCMT 060202 rhombic format 0.2 mm corner radius for fine surface finish Single-sided chipbreaker with countersunk hole Consistent finishing and measurable productivity gains The GT9530 coating chemistry and cermet substrate are optimised for finishing to light universal turning of steel, offering a measurable improvement in surface quality and tool life under stable conditions. The small 0.2 mm corner radius reduces cutting forces at the tool tip while maintaining a fine surface; this supports higher surface consistency and fewer rework passes. Where batch sizes and component tolerances require repeatable finishes, the insert’s geometry helps to reduce variation in part quality, contributing to predictable cycle times and lower per-part cost. Secure fit and fast, predictable set-up times The ISO CCMT 060202 format, rhombic form and the cylindrical hole with one-sided countersink (40°–60°) ensure reliable seating in compatible holders. The 2.38 mm plate thickness and defined 7° clearance are part of the dimensional system that determines compatibility: form, clearance angle, tolerance class, fastening and plate size must match the holder. Correct selection reduces vibration and improves repeatability, so set-ups are faster and less reliant on manual adjustment. The 80° included angle gives a stable cutting edge for a wide range of external and internal turning tasks. Application guidance and machining recommendations Designed primarily for turning steel in finishing to light-duty operations, the insert features a single-sided chipbreaker that promotes consistent chip control when conditions are stable. Select feed and depth of cut to match the intended surface requirement rather than maximum metal removal; this grade is optimised for longer tool life and superior surface quality rather than heavy roughing. When replacing or re-indexing, ensure the holder and fastening hardware correspond to the ISO geometry to preserve the intended cutting performance and edge stability. For mixed-material schedules, choose chipbreaker and grade appropriate to the workpiece material and operational rigidity. Contact Metav Werkzeuge for tailored application advice or to reserve CCMT 060202 GT9530 inserts from stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998284 SKU: 6998284-Tungaloy Manufacturer SKU: TUN6998284 Model series: ISO turning indexable inserts Designation: CCMT060202 GT9530 Facts Corner radius: 0.2 mm Thickness: 2.38 mm Included angle: 80° Clearance angle: 7° Size: 06 Special features Coated cermet grade GT9530 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning; finishing to light universal use on steel Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What material range is recommended for this insert? The CCMT 060202 GT9530 insert is specified for turning steel, particularly where a good surface finish and extended tool life are required under stable machining conditions. How is chip control achieved with this insert? Chip control is provided by the single-sided chipbreaker in the GT9530 grade; consistent chip formation is achieved when cutting parameters and rigidity match the intended finishing operation. Which holder features must be checked for compatibility? Compatibility requires matching the ISO format, plate form, clearance angle (7°), thickness (2.38 mm), fastening style and the hole/countersink geometry to ensure correct seating and repeatable performance. Is the CCMT 060202 GT9530 suitable for roughing operations? This grade and geometry are optimised for finishing to light universal turning rather than heavy roughing; for high metal removal rates a more robust grade or different chipbreaker should be selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of wear-resistant coated cermet, a precise 0.2 mm corner radius and ISO compatibility for consistent finishing in stable turning operations; order through Metav Werkzeuge or consult our specialists for tailored machining advice. CCMT 060202 GT9530 Tungaloy turning insert – rhombic CCMT, 80° included angle CCMT 060202 GT9530 Tungaloy turning insert is an ISO-format rhombic indexable insert designed for finishing and light universal turning applications, providing extended life and improved surface quality. Coated cermet grade GT9530 Rhombic CCMT 06 form, 80° included angle 0.2 mm corner radius for fine finishes Single-sided chipbreaker with centred hole and countersink Precision finishing with a wear-resistant cermet grade The coated cermet GT9530 offers a balanced combination of wear resistance and edge integrity, making it suitable for finishing and light universal turning of steel under stable conditions. The fine 0.2 mm corner radius reduces edge chipping while maintaining the ability to produce a high-quality surface finish; this means fewer rework cycles and more consistent part quality. The cermet coating supports sustained cutting at the finishing end of the process, translating into predictable tool life and lower overall operating costs when machines and setups remain stable. Secure seating and predictable compatibility for reliable production Compatibility with the toolholder is determined by shape, clearance (7°), tolerance class, fixing method, size and thickness; this CCMT-format insert matches standard ISO seats, simplifying tool preparation. The central hole with a cylindrical bore and one-sided countersink (40°–60°) ensures firm clamping and repeatable seating, so the insert location remains constant between indexings. Predictable mounting leads to reproducible geometry at the cutting edge, which in turn supports stable process control and reduced scrap rates. Optimised chip control and cutting stability The single-sided chipbreaker is tuned for controlled chip formation during finishing passes, improving evacuation and reducing the risk of built-up edge. Combined with the rhombic 80° included angle, the geometry provides both accessibility to external profiles and reliable edge support for internal turning where applicable. These traits make the insert particularly efficient when cutting parameters are selected to favour surface quality and tool life rather than maximum metal removal rates. Practical benefits in shop-floor language Specified as an ISO CCMT insert with a 2.38 mm thickness and 06 size, the insert integrates into conventional turning tool systems without custom adapter requirements. The carbide substrate delivers the rigidity needed for fine-turning operations, while the GT9530 coating extends service intervals under consistent, well-set machining conditions. For workshops aiming to streamline finishing operations, this insert offers a clear efficiency advantage through fewer tool changes and steadier part-to-part quality. Contact Metav Werkzeuge for application recommendations and rapid supply of Tungaloy CCMT 060202 GT9530 turning inserts; technical assistance is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6998297 SKU: 6998297-Tungaloy Manufacturer SKU: TUN6998297 Model series: ISO-Drehwendeschneidplatten Type designation: CCMT060202 Facts Size: 06 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.2 mm Included angle: 80° Hole style: with hole; cylindrical hole + one-sided countersink (40°–60°) Features Sort/coating: GT9530 (coated cermet) Substrate material: carbide Shape: rhombic (CCMT) Chipbreaker: one-sided Application: Turning Compatibility note: compatibility determined by shape, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The CCMT 060202 GT9530 Tungaloy turning insert is designed primarily for steel machining in finishing and light universal turning; the GT9530 cermet grade balances wear resistance and surface quality for such applications. Is the insert suitable for finishing operations? Yes — the 0.2 mm corner radius and the coated cermet grade make the insert well suited to finishing passes where high surface quality and sustained edge life are required for Tungaloy CCMT-format inserts. How does the mounting ensure repeatability? Repeatable seating is achieved via the central hole with a cylindrical bore and one-sided countersink (40°–60°) combined with the standard CCMT shape, ensuring stable clamping and consistent location in ISO toolholders. Can the insert be used for internal turning as well as external? The rhombic CCMT form and 80° included angle provide good accessibility for many external profiles and can be used for some internal operations where geometry and holder clearance permit when using the CCMT 060202 GT9530 insert. What should be checked for toolholder compatibility? Confirm the holder accepts the CCMT 06 form, the 2.38 mm thickness, 7° clearance, and that the fastening method matches the insert’s hole and countersink style; these factors determine secure fitting and correct tool geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 H13A Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product characteristics indexable inserts CCMT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202KFH13A-SANDVIK Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060202-H13A-Sandvik 40END
CCMT 060202 IB55 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202TIB55 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IB55 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IB55-ISCAR 40END
CCMT 060202 IC20N Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202IC20N Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC20N-ISCAR 40END
CCMT 060202 IC6015 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC6015 Series: SWISSTURN ISO-Code: CCMT060202 Grade: IC6015 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC6015-ISCAR 40END
CCMT 060202 IC6015 Indexable Insert - ISCAR
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Detail specifications for indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC6015 Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IC6015-ISCAR 40END
CCMT 060202 IC6025 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC6025 Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC6025-ISCAR 40END
CCMT 060202 IC6025 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC6025 Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC6025-ISCAR 40END
CCMT 060202 IC804 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Design details indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC804 Series: TURNING PVD ISO-Code: CCMT060202 Grade: IC804 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC804-ISCAR 40END
CCMT 060202 IC806 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC806 Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC806-ISCAR 40END
CCMT 060202 IC806 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-SMIC806 Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC806-ISCAR 40END
CCMT 060202 IC807 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC807 Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC807-ISCAR 40END
CCMT 060202 IC807 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Features inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3PIC807 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC807-ISCAR 40END
CCMT 060202 IC807 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCMT 060202 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC807 Facts & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC807-ISCAR 40END
CCMT 060202 IC8150 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3PIC8150 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IC8150-ISCAR 40END
CCMT 060202 IC8150 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Design details CCMT 060202 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-SMIC8150 Series: TURNING CVD ISO-Code: CCMT060202 Grade: IC8150 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IC8150-ISCAR 40END
CCMT 060202 IC8250 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060202 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202IC8250 Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC8250-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com