Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 060208 KR 3210 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications insert CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KR3210-SANDVIK ISO-Code: CCMT060208 Grade: 3210 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: KR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-3210-Sandvik 40END
CCMT 060208 KR 3225 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KR3225-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-3225-Sandvik 40END
CCMT 060208 KT315 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product details for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FW-KT315-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KT315-Kennametal 40END
CCMT 060208 KT315 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product details for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KT315-KENNAMETAL Facts & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KT315-Kennametal 40END
CCMT 060208 KTP10 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FP-KTP10-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KTP10-Kennametal 40END
CCMT 060208 M235 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM235-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: M235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-M235-Sandvik 40END
CCMT 060208 MM 1105 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1105-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1105-Sandvik 40END
CCMT 060208 MM 1115 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1115-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1115-Sandvik 40END
CCMT 060208 MM 1125 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1125-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1125-Sandvik 40END
CCMT 060208 MM 2015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM2015-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-2015-Sandvik 40END
CCMT 060208 MR 2015 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MR2015-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-2015-Sandvik 40END
CCMT 060208 MR 2035 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MR2035-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-2035-Sandvik 40END
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the ISO CCMT form for consistently improved surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CCMT 060208 NS9530 Tungaloy turning insert — finishing cermet for precision turning CCMT 060208 NS9530 Tungaloy turning insert is an ISO CCMT-format insert designed for precision external and internal turning in steel; optimised for continuous cuts and small depths of cut Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces ISO CCMT form with 7° relief Cylindrical hole with single-side countersink Delivering superior finishes with low cutting forces The NS9530 uncoated cermet grade is formulated for finishing applications in steel, providing a sharp cutting edge that reduces cutting forces and promotes a finer surface finish. As a dedicated finishing grade, the insert excels in continuous cutting and small depths of cut where stable chip flow and repeatable surface quality are required. The combination of edge integrity and material composition results in longer intervals between edge changes on stable setups, supporting higher throughput without sacrificing component appearance. Reliable mounting and ISO compatibility for reproducible results Supplied in the ISO CCMT geometry, the insert is compatible with holders that match the insert's form, 7° relief, tolerance class, clamping method, size and thickness. This standardised fit ensures consistent seat contact and repeatable positioning, which translates directly into predictable machining tolerances and reduced setup time. Using a matched external holder or boring bar together with the recommended shim and clamping set secures the insert and helps maintain cutting stability throughout longer production runs. Design choices that reduce chip issues and ease handling The insert features a single-sided chipbreaker, a 0.8 mm corner radius, and a cylindrical hole with single-side countersink (40°–60°) to simplify clamping and improve chip evacuation in finishing operations. The plate thickness of 2.38 mm and the insert’s geometry provide the required rigidity for fine-turning tasks while keeping cutting forces modest. These design elements collectively lower vibration susceptibility and contribute to consistent surface integrity, making the insert suitable for precision components where visual and dimensional quality are priorities. Contact Metav Werkzeuge to discuss the suitability of the Tungaloy CCMT060208 NS9530 finishing insert for specific turning applications; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998435 SKU: 6998435-Tungaloy Manufacturer SKU: TUN6998435 Designation: CCMT060208 NS9530 Tungaloy insert Facts ISO designation: 060208 Corner radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Included angle: 80° Size: 06 Special features Uncoated cermet grade NS9530 Finishing grade for steel Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO CCMT form for standardised clamping Compatible with ISO holders depending on form, relief, tolerance, clamping, size and thickness System: insert + matching external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert best suited for? The CCMT 060208 NS9530 Tungaloy insert is optimised for finishing in steel and delivers low cutting forces and high surface quality when used for continuous cuts. How does the NS9530 grade influence performance? The NS9530 uncoated cermet provides a sharp edge and good wear resistance for finishing; with the CCMT geometry it supports stable cuts and improved surface finishes. Which holders are compatible with this insert? Compatibility depends on matching the ISO CCMT form, the 7° relief, tolerance class, clamping method, size and thickness; the insert suits holders designed for CCMT inserts. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with single-side countersink (40°–60°) simplifies secure clamping and alignment in the seat, aiding repeatable positioning and chip flow control. Can this insert be used for internal as well as external turning? Yes, the CCMT 060208 NS9530 Tungaloy insert is suitable for both external and internal turning provided the selected holder and setup match the insert’s geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision finishing solution that combines a sharp cermet cutting edge with a 0.8 mm corner radius for superior surface quality and reduced cutting forces; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 060208 NS9530 — ISO indexable turning insert, uncoated cermet by Tungaloy CCMT 060208 NS9530 is a compact ISO turning insert designed for finishing operations on steel, offering a sharp edge geometry and stable performance in continuous cuts. Uncoated cermet for fine finishing Sharp cutting edge reduces cutting forces ISO CCMT 060208, rhombic profile Suitable for continuous cuts and small depths Exceptional surface finish for finishing turns The insert is manufactured from an uncoated cermet grade (NS9530) that provides a sharp cutting edge and consistently low cutting forces. This combination is ideal for producing high surface quality on steel workpieces during external and internal turning. For processes involving continuous cutting or small depths of cut, the material and geometry support longer intervals between edge changes and fewer rework steps, which helps to keep production stable and predictable. Geometry and fit that ensure repeatable clamping Thanks to the rhombic shape and ISO conformity, the insert matches standard holders when shape, relief angle (7°), tolerance class, clamping and thickness are compatible. The 80° included angle and 0.8 mm corner radius deliver a defined contact zone that reduces vibration and improves dimensional consistency. Where holders require a locating hole, this insert is supplied with a hole and a cylindrical hole plus single‑side countersink (40°–60°) for secure fastening and correct seating. Process benefits: efficiency and predictability The combination of cermet substrate and acute cutting geometry produces low cutting forces and a gentle cutting action, which reduces tool‑holder load and vibration. For production environments focused on part quality and throughput, this results in fewer rejects and more consistent cycle times. The insert’s one‑sided chipbreaker is tuned for continuous chips typical of finishing cuts, promoting reliable chip flow and reducing the risk of surface damage. Practical selection and integration guidance When selecting an insert for finishing steel, consider the interaction of feed, depth of cut and cutting speed: this finishing grade excels at modest feeds and shallow depths where surface finish is critical. The insert thickness (2.38 mm) and standard 06 size make it compatible with common ISO turning holders; final compatibility is determined by holder form and clamping system. For best outcomes, pair the insert with a holder that supports the 7° relief and the specified hole style to ensure repeatable clamping and optimal cutting geometry. For finishing operations that demand consistent surface quality, choose Tungaloy quality — contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6998433 SKU (seller): 6998433-Tungaloy Manufacturer SKU: TUN6998433 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Nose radius: 0.8 mm Relief angle: 7° Insert thickness: 2.38 mm Insert size: 06 Included angle: 80° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Cutting material: cermet (uncoated) Chipbreaker: one-sided Shape: rhombic Intended use: turning (external and internal) Compatibility: ISO insert — fit depends on holder form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert intended for? The NS9530 grade is formulated for finishing operations on steel; the CCMT 060208 NS9530 insert delivers a sharp edge and low cutting forces tailored to steel machining. Which holder features are required for correct fitment? Fitment depends on holder shape, the 7° relief angle, tolerance class, clamping method, insert size and thickness; the insert is ISO‑conformant for standard CCMT pockets. How does the uncoated cermet compare to coated grades? Uncoated cermet like NS9530 offers a sharper edge and better surface finish in finishing cuts compared with many coated grades, particularly for continuous cuts and small depths of cut. Is the insert suitable for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning tasks when matched with the appropriate holder and machining parameters. What is the purpose of the countersunk hole style? The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and correct seating in holders that use a screw and clamp arrangement Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing‑grade uncoated cermet and precise geometric control for consistent surface quality and low cutting forces; the compact rhombic design with a 0.8 mm corner radius ensures reliable finishing on steel components. Order the insert directly via Metav Werkzeuge or consult our specialists for selection support. CCMT060208 NS9530 Tungaloy turning insert — finishing uncoated cermet, rhombic ISO insert The CCMT060208 NS9530 Tungaloy turning insert is an ISO‑standard rhombic insert for external and internal turning, designed as a finishing grade for steel with a sharp cutting edge and one‑sided chipbreaker. ISO‑standard rhombic insert CCMT 060208 Finishing-grade uncoated cermet NS9530 Sharp cutting edge for low cutting forces Cylindrical hole with single‑side countersink Faster, cleaner finishing for steel turning operations The uncoated cermet grade NS9530 is formulated for finishing operations on steel where a sharp cutting edge and minimal cutting forces are critical. The combination of the cermet cutting layer and the insert geometry reduces rubbing and smearing at the tool edge, which directly improves surface integrity and lowers the need for secondary finishing. In practice, this means fewer rejected parts and more consistent cycle times when performing continuous cuts with small depths of cut. The result is a measurable efficiency gain in production without sacrificing surface quality. Geometry engineered for repeatability and secure clamping Built to the ISO form CCMT 060208, the insert features an 80° included angle, a 7° clearance, a 0.8 mm corner radius and a plate thickness of 2.38 mm, all of which support stable seating in standard toolholders. The cylindrical hole with single‑side countersink (40°–60°) ensures positive locating and secure fastening, which minimises micro‑movement and runout during turning. These geometric parameters are decisive for repeatable part tolerances and extended tool life when paired with a matched holder and clamping set. Controlled chips and simple integration into tooling systems The one‑sided chipbreaker provides predictable chip formation in finishing cuts, promoting safe evacuation and reducing the risk of built‑up edge. Selection of the chipbreaker and grade should align with workpiece material, cutting parameters and machine stability to achieve optimal results. Integration is straightforward: the ISO insert assembles with a compatible external holder or boring bar, plus a shim/clamp set and spare screws for maintenance. This makes the insert easy to adopt into existing turning setups and flexible for both external and internal turning tasks. For precision finishing on steel components, request the CCMT060208 NS9530 Tungaloy turning insert from Metav Werkzeuge for immediate availability and tailored selection advice — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6735897 Manufacturer SKU: TUN6735897 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Relief (clearance) angle: 7° Plate thickness: 2.38 mm Insert size: 06 Included angle: 80° Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: rhombic Chipbreaker: one‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Suitable applications: external and internal turning; finishing operations on steel System components: ISO insert, matching external holder or boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for finishing steel parts? Yes. The CCMT060208 NS9530 Tungaloy insert is a finishing‑grade, uncoated cermet formulated for steel finishing where a sharp edge and low cutting forces produce superior surface finish. Which holders are compatible with this ISO insert? Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness; use holders specified for CCMT inserts and ensure the holder matches the 2.38 mm thickness and cylindrical hole location. Is the cutting material coated? No. This grade is an uncoated cermet offering a sharp edge and stable performance in continuous finishing cuts. What are the key geometric values to consider? Corner radius 0.8 mm, clearance angle 7°, plate thickness 2.38 mm and an 80° included angle are the main dimensions that determine seating and cutting behaviour. How does the chipbreaker influence performance? The one‑sided chipbreaker promotes controlled chip formation in finishing passes; selecting the correct chipbreaker and grade according to material and machining stability improves surface quality and process reliability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that combines a sharp uncoated cermet cutting edge, low cutting forces and ISO compatibility to secure consistent surface quality and efficient cycle times; order the CCMT060208 NS9530 turning insert via Metav Werkzeuge or request application advice from the consultants. CCMT060208 NS9530 Tungaloy indexable turning insert — uncoated cermet for turning The CCMT060208 NS9530 is an ISO rhombic turning insert designed for precision finishing of steel, offering a sharp cutting edge and low cutting forces for continuous cutting and small depths of cut. ISO rhombic indexable insert 80° Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing One-sided chipbreaker with countersunk hole High-quality finishing for steel components The NS9530 grade is an uncoated cermet specifically formulated as a finishing grade for steel, delivering a high surface finish with low built-up edge tendencies. Its combination of a sharp cutting edge and a cermet matrix enables clean shearing at small depths of cut, which reduces the need for secondary operations. For machinists seeking predictable, repeatable part finish, this finishing insert provides a measurable improvement in surface integrity while maintaining excellent dimensional control on turned workpieces. Reduced cutting forces for smoother machining A sharp edge geometry and cermet microstructure result in low cutting forces, which reduces tool load and vibration during light finishing passes. Lower forces translate into better process stability and allow for higher feed rates in continuous cutting, improving throughput without sacrificing surface quality. The one-sided chipbreaker supports consistent chip formation, keeping chips compact and the cutting zone clear, which helps to maintain cycle stability in automated turning cells. Seamless integration into ISO turning systems Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness; this insert is ISO-specified as CCMT060208 and features an 80° rhombic form with a 7° clearance angle. The plate thickness of 2.38 mm, a corner radius of 0.8 mm and a centre hole with a cylindrical bore plus one-sided countersink (40°–60°) ensure reliable clamping in standard external holders, along with the usual underlay, clamp set and replacement screws. Clear matching of these dimensions to the chosen holder secures repeatable seating and stable cutting conditions at every tool change. Consistent edge performance and economical machining Constructed on a robust carbide substrate with a cermet cutting layer, the insert provides durable edge life under finishing conditions while avoiding unnecessary coatings that can blunt a keen edge required for mirror finishes. The geometry and grade support consistent performance across batch production, reducing scrap and rework. Coupled with Tungaloy’s manufacturing tolerances and quality control, the insert is suited for shops prioritising surface quality and process reliability in turning operations. Contact Metav Werkzeuge for tailored application recommendations and to request CCMT060208 NS9530 Tungaloy finishing inserts; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6945208 Manufacturer SKU: TUN6945208 SKU: 6945208-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Measurements Corner radius: 0.8 mm Clearance angle: 7° Lead/approach angle: 80° Plate thickness: 2.38 mm Plate size: 06 Centre hole: with hole Special features Grade: NS9530 (uncoated cermet) Material substrate: carbide Plate form: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning ISO designation: CCMT060208 FAQ What materials is this insert intended for? The CCMT060208 NS9530 is a finishing grade formulated for steel and is optimised for continuous cuts and small depths of cut to achieve superior surface finish. Is the insert coated? The CCMT060208 NS9530 is an uncoated cermet insert; this uncoated design helps maintain a very sharp cutting edge for fine finishing tasks. How is holder compatibility ensured? Compatibility depends on matching insert form, clearance angle, tolerance class, fastening method, size and thickness; check that the holder supports an ISO CCMT060208 rhombic plate with 7° clearance and 2.38 mm thickness. What chip control does the insert provide? The insert is supplied with a one-sided chipbreaker, which promotes compact chip formation during finishing passes. What is the manufacturer SKU and article number? The article number is 6945208 and the manufacturer SKU is TUN6945208 for this Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet NS9530 insert with a 0.8 mm corner radius and a sharp cutting edge to achieve low cutting forces and superior surface quality in steel turning. The ISO-format design ensures compatibility with standard CCMT holders when form, clearance, tolerance class, fastening, size and thickness match. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 060208 NS9530 — Tungaloy CCMT060208 NS9530 turning insert for finishing A CCMT060208 NS9530 insert engineered for finishing operations in steel turning, offering low cutting forces and consistently fine surface finishes Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces Optimised for continuous cuts and fine finish ISO CCMT 060208 with 0.8 mm corner radius High-precision finishing for steel turning The uncoated cermet NS9530 is developed as a finishing grade for steel, providing a sharp cutting edge and reduced cutting forces that translate directly into a better surface texture. Because the material promotes stable machining at light feeds and small depths of cut, the result is a consistently high-quality external or internal turning face. The ISO geometry and rhombic form are standardised to simplify toolholder selection and to ensure repeatable seating and clamping for predictable results. Predictable chip control and holder compatibility The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match common clamping systems; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The one-sided chipbreaker design supports continuous cutting conditions typical for finishing passes, reducing vibration and improving dimensional stability. Specifying the correct chipbreaker and grade for the workpiece material and machining conditions ensures reliable chip behaviour and longer productive tool life. Workshop benefits: efficiency and surface quality Using a dedicated finishing grade reduces rework and inspection effort: lower cutting forces lessen spindle load and tool deflection, while the cermet cutting edge helps achieve a superior finish straight off the machine. This results in fewer downstream operations and increased process efficiency. The compact plate thickness and standardised format enable quick index changes and straightforward inventory management for series production or small-batch runs. Selection and integration guidance for machinists For best results, pair the plate with a matching ISO CCMT holder and check the holder’s clearance and tolerance class before assembly. The insert’s 7° clearance angle and 0.8 mm corner radius suit light finishing depths; a rigid setup and appropriate cutting parameters will exploit the grade’s strengths in continuous cuts. If application details are uncertain, technical consultation can help define the optimal chipbreaker and cutting data to match workpiece steel and required surface integrity. For finishing steel turning applications the Tungaloy NS9530 cermet insert is recommended — contact Metav Werkzeuge for availability and tailored cutting-data advice. Technical data Article number: 6998420 Manufacturer SKU: TUN6998420 Stock SKU: 6998420-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 060208 Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Plate size: 06 Special features Uncoated cermet grade NS9530 One-sided chipbreaker Rhombic plate form (CCMT) With hole: cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO holders depending on form, clearance, tolerance class, fastening, size and thickness FAQ What machining tasks is this insert suited to? The CCMT060208 NS9530 Tungaloy turning insert is intended primarily for finishing operations in steel turning, especially continuous cuts and small depths of cut where a fine surface finish is required. How does NS9530 differ from standard carbide grades? NS9530 is an uncoated cermet finishing grade that offers a sharper cutting edge and lower cutting forces than many conventional carbide grades, which helps to improve surface quality during finishing passes. Can this insert be used for internal as well as external turning? Yes, the ISO CCMT geometry and rhombic form make the insert suitable for both external and internal turning when the correct holder and rigour of setup are observed. What should be checked before mounting the insert? Verify holder compatibility with the CCMT form, the 7° clearance angle, tolerance class and fastening method; ensure the clamping and seat dimensions match the ISO specification. Is a coated version available for different applications? This specific SKU is an uncoated cermet NS9530; for other coatings or grades, consult Metav Werkzeuge to select an alternative suited to different materials or cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet finishing grade and the ISO CCMT form for predictable, low-force turning of steel; order directly via Metav Werkzeuge or consult their specialists for application guidance. CCMT 060208 NS9530 — indexable turning insert, uncoated cermet finishing grade (Tungaloy) A CCMT 060208 NS9530 indexable insert engineered for precision external and internal turning of steel, optimised for continuous finishing cuts. ISO CCMT shape, compatible with standard holders Uncoated cermet NS9530 for superior surface finish Sharp cutting edge for low cutting forces Single-sided chipbreaker with centred hole and countersink Predictable finishing performance with low cutting forces The uncoated NS9530 cermet is a finishing grade developed for low cutting forces and an exceptionally fine surface finish on steel. Its inherently sharp edge reduces built-up edge and cutting resistance during small depth passes, which helps to minimise secondary machining and polishing. The result is a more consistent part finish and reduced cycle variation for production runs where surface quality is decisive. ISO compatibility that simplifies tool changeovers This CCMT-form insert follows ISO norms, so fitment depends on geometry, relief angle and size rather than proprietary interfaces. Key dimensions such as the 7° relief angle, 2.38 mm thickness and 0.8 mm corner radius ensure stable clamping and repeatable seating in standard CCMT holders. The rhombic plate with a central hole and cylindrical hole plus one-sided countersink (40°–60°) supports secure fastening and straightforward indexability for rapid tool changes. Controlled chips and steady process behaviour for finishing cuts Equipped with a single-sided chipbreaker, the insert is optimised for continuous cuts and small feed rates common in finishing operations. Chip control is tuned to produce manageable swarf without disturbing the machined surface, which reduces interruptions and the need for manual intervention. Selecting this chipbreaker and grade supports a steady, predictable machining process across similar batches of steel components. Operational benefits for the workshop Standardised ISO form and a dedicated finishing grade translate directly into predictable performance and simpler inventory management. The insert’s design reduces rework and inspection time by delivering consistent surface quality, while the robust geometry supports reliable repeatability across batches. For shops aiming to streamline turning operations, this combination enhances productivity without complex setup changes. For reliable finishing in steel turning, request a quote or application advice for Tungaloy CCMT 060208 NS9530 inserts from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Manufacturer article number: 6945217 SKU: 6945217-Tungaloy Designation: CCMT060208 NS9530 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Included angle: 80° Corner radius: 0.8 mm Relief angle: 7° Thickness: 2.38 mm Size: 06 Special features Rhombic plate form (CCMT) With hole; cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Uncoated cermet grade NS9530 Designed for external and internal turning ISO-compatible CCMT form for standard holders FAQ Is this insert suitable for finishing steel components? The CCMT 060208 NS9530 insert (Tungaloy, SKU 6945217-Tungaloy) is a finishing-grade, uncoated cermet designed specifically for steel applications and continuous finishing cuts. Which toolholders are compatible with this insert? Compatibility is determined by shape, relief angle, tolerance class, clamping method, size and thickness; holders compatible with ISO CCMT 06 inserts will accept this form when the clamping and tolerance match. What chip control does the insert provide? A single-sided chipbreaker is integrated to support controlled swarf formation in continuous cuts, improving surface integrity and reducing interruptions. Can the insert be used for internal as well as external turning? Yes, the geometry and grade are suitable for both external and internal turning operations when machine rigidity and setup stability are appropriate. Is the cutting material coated? The cutting material is an uncoated cermet (NS9530), selected for a sharp edge and excellent surface finish in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
The product data contains contradictory information regarding the cutting material: one entry specifies cemented carbide while another specifies uncoated cermet, which creates confusion and makes it difficult to determine the accurate material used in the product. This inconsistency could lead to errors in the product description or miscommunication with customers, potentially impacting their purchasing decisions. To ensure the accuracy and reliability of the product description, it is essential to verify the source data thoroughly and resolve any discrepancies between the entries. Please review the original documentation or consult the relevant team to clarify and confirm the correct cutting material specification.
CCMT 060208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade cermet designed for low cutting forces and superior surface quality; the sharp edge and single-sided chipbreaker ensure consistent results in continuous turning operations. Order through Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT 060208 NS9530 turning insert (CCMT060208) — Tungaloy CCMT 060208 NS9530 is a rhombic ISO turning insert optimised for finishing steels in continuous cuts and small depths of cut Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces Rhombic CCMT shape, 7° clearance angle Single-sided chipbreaker, hole with countersink High-quality finishing for steel turning The NS9530 uncoated cermet grade is formulated as a finishing sort for steel, providing a sharp cutting edge that reduces cutting forces and helps achieve an excellent surface finish. This makes the insert well suited to continuous turning operations and small depth-of-cut scenarios where consistent dimensional control and minimal tool marks are required. Because the material is optimised for low forces, chatter susceptibility is reduced and stable cutting conditions are easier to maintain, improving process reliability on conventional and CNC lathes. Secure mounting and compatible holder systems The rhombic CCMT geometry and the insert’s mounting features allow straightforward integration into common external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the insert includes a cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems. With a clearance angle of 7° and an included corner radius of 0.8 mm, the geometry balances cutting-edge sharpness with sufficient edge strength. These details mean the insert can be seated and secured reliably, enabling predictable tool behaviour in series production. Productivity benefits and recommended applications This uncoated cermet finishing insert offers economical productivity for shops focused on high-quality finishes rather than heavy stock removal. The single-sided chipbreaker assists chip control in continuous cuts, while the corner radius 0.8 mm supports consistent profile transfer on external and internal turning passes. Choose this insert where surface quality and repeatability are priorities — for example, final passes on turned shafts, bearing journals or precision fit components. The combination of geometry, grade and mounting configuration supports efficient, repeatable processes across a broad range of steels. For precision finishing with a dependable cermet, specify Tungaloy CCMT 060208 NS9530 via Metav Werkzeuge; for technical advice or to confirm holder compatibility contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (manufacturer): 6998430 SKU: 6998430-Tungaloy Designation: CCMT060208 NS9530 Tungaloy insert Model series: ISO turning inserts Manufacturer: Tungaloy Facts Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.8 mm Insert angle: 80° Size: 06 Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Single-sided chipbreaker Rhombic (CCMT) insert shape Cylindrical hole with single-side countersink (40°–60°) Compatible with standard external holders and boring bars System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ Is this insert suitable for finishing operations on alloyed steels? The CCMT 060208 NS9530 insert is a finishing cermet optimised for steel; it is suitable for many alloyed steels where low cutting forces and superior surface finish are required. What mounting features does the insert offer for secure clamping? The insert has a cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems; the CCMT geometry and thickness ensure stable seating in appropriate holders. How does the NS9530 grade affect surface quality and tool life? NS9530 is an uncoated cermet finishing grade that produces a sharp cutting edge for improved surface quality and lower cutting forces; tool life depends on workpiece material and cutting conditions but the grade is designed for consistent finishing performance. Can this insert handle internal turning as well as external turning? Yes, the geometry and chip control characteristics make the insert suitable for both external and internal turning when matched with the correct holder or boring bar. Which corner radius is recommended for precision finishes? The CCMT 060208 comes with a corner radius of 0.8 mm, which balances edge strength and fine profile fidelity for precision finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060208 PM 1515 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM1515-SANDVIK ISO-Code: CCMT060208 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1515-Sandvik 40END
CCMT 060208 PM 1525 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM1525-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1525 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1525-Sandvik 40END
CCMT 060208 PM 4335 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM4335-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-4335-Sandvik 40END
CCMT 060208 PM 4415 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM4415-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com