Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 060208 WM 4315 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM4315-SANDVIK Data & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4315-Sandvik 40END
CCMT 060208 WM 4415 Indexable Insert - Sandvik
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product characteristics CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM4415-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
CCMT 060208 WM 4425 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM4425-SANDVIK ISO-Code: CCMT060208 Grade: 4425 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: WM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4425-Sandvik 40END
CCMT 09T302 -MF 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications CCMT 09T302 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T302-MF1205-SANDVIK Facts for the tool: ISO-Code: CCMT09T302 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T302-1205-Sandvik 40END
CCMT 09T302 4325 Indexable Insert - Sandvik
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Performance features indexable inserts CCMT 09T302 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T302PF4325-SANDVIK ISO-Code: CCMT09T302 Grade: 4325 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T302-4325-Sandvik 40END
CCMT 09T302 AH120 Wendeplatten - Tungaloy
Take advantage of PVD-coated carbide in the AH120 grade combined with an 80° rhombic geometry and a 0.2 mm nose radius for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the technical advisors for application support. CCMT09T302 AH120 Tungaloy indexable insert — PVD-coated carbide, 0.2 mm radius CCMT09T302 AH120 Tungaloy indexable insert for general turning applications, designed to deliver a sharp cutting edge and consistent process security in both external and internal operations PVD-coated carbide for wear resistance Sharp cutting edge for consistent surface quality 80° rhombic geometry for versatile turning 0.2 mm nose radius for fine features Improved wear resistance for uninterrupted production The AH120 grade is a PVD-coated carbide developed to combine wear resistance with a tough cutting edge, which results in process security during repetitive turning cycles. This grade is particularly suited when a balance of a sharp cutting edge and reliable edge stability is required, reducing the incidence of unplanned tool changes. The coating reduces flank wear and helps maintain cutting performance over longer batch runs, providing measurable gains in uptime and repeatability in a production environment. Secure clamping and adaptable mounting for consistent results The 80° rhombic geometry with a cylindrical hole and single-sided countersink (40°–60°) ensures stable clamping and straightforward indexing in compatible holders. Compatibility with a given toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness, so adoption into existing tool systems is typically a matter of matching these parameters. The insert’s geometry supports a range of turning operations and helps maintain cutting forces in a predictable manner for repeatable component quality. Predictable chip control and improved process economy Equipped with a one-sided chipbreaker, this insert promotes stable chip formation suited to a variety of turning tasks, which in turn reduces interruptions and handling time. The combination of a robust substrate and PVD finish extends tool life and lowers total machining cost per part through fewer tool changes and consistent surface quality. For production-focused workshops, the result is a tangible improvement in throughput and reduced variance in part-to-part outcomes. Selection guidance and typical turning applications As an indexable insert for turning, the CCMT09T302 format suits both external and internal operations, from semi-finishing to fine finishing when a small nose radius is required. The 0.2 mm nose radius supports detailed profiles and tight cornering, while the AH120 grade is intended where edge sharpness and process reliability are priorities. When integrating this insert, select the chipbreaker and grade according to workpiece material and machine–tool rigidity to optimise performance and surface finish. For proven process security with the Tungaloy AH120 grade, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6853585 Manufacturer article number: 6853585 SKU: 6853585-Tungaloy Manufacturer SKU: TUN6853585 Series: ISO turning indexable inserts Type designation: CCMT09T302 AH120 Tungaloy indexable insert Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Geometry angle: 80° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Coating: PVD coating Insert shape: rhombic Chipbreaker: one-sided Application: turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What kinds of turning operations suit this insert best? The CCMT09T302 AH120 insert is suitable for external and internal turning, offering a balance between finishing and semi-finishing where a sharp cutting edge and process security are required. Can this insert be used in existing ISO-compatible holders? Yes, the insert follows ISO indexable insert standards; compatibility depends on matching holder form, relief angle, tolerance class, fastening method, size and thickness. What does the AH120 grade offer compared with standard grades? The AH120 grade provides enhanced wear resistance through a PVD-coated carbide substrate while maintaining a sharp cutting edge for consistent surface quality and longer tool life. How does the hole and countersink design affect installation? The cylindrical hole with a single-sided countersink (40°–60°) supports secure clamping and correct seating in holders designed for this hole style, contributing to repeatable positioning and stability. What benefits does the 0.2 mm nose radius deliver? A 0.2 mm nose radius enables detailed profile work and improved surface finish on fine features, making it suitable for precision turning tasks requiring close tolerances. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, a sharp yet stable cutting edge and a universal PVD grade for reliable stainless steel turning. Order the CCMT09T302 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T302 AH6225 Tungaloy turning insert – rhombic, 0.2 mm radius The CCMT09T302 AH6225 is an ISO rhombic turning insert designed for external and internal turning with a universal PVD-coated carbide grade suited to stainless steel machining. PVD-coated carbide AH6225 for stainless steel ISO rhombic CCMT form, 80° included angle 0.2 mm corner radius for precise finishing Hole with single-sided countersink for secure fit Consistent cutting performance in stainless steel The CCMT09T302 AH6225 combines a PVD-coated carbide substrate with a grade engineered for stainless steel, delivering a sharp edge that resists deformation under variable conditions. The AH6225 grade balances toughness and wear resistance to reduce edge chipping during interrupted cuts and when machining work-hardened surfaces. This results in extended tool life and more predictable component tolerances, which supports efficient cycle planning and reduced rework. Geometry engineered for precision and stability The rhombic CCMT form provides an 80° included angle that promotes rigidity for facing and longitudinal turning, while the 0.2 mm corner radius enables fine surface finishes without sacrificing edge strength. A 7° clearance minimises rubbing at the flank and helps maintain stable cutting forces. These geometric details translate into repeatable dimensional control and consistent surface quality when the tool is integrated into a properly set-up turning system. ISO compatibility for straightforward integration Produced to ISO-formed dimensions, the insert fits standard holders when matched by form, clearance, tolerance class, fixing method, size and thickness. The insert thickness of 3.97 mm and the presence of a hole with a single-sided countersink (40°–60°) ensure secure seating and ease of fixation in a wide range of clamping systems. The system concept comprises the ISO insert together with a suitable external holder or boring bar, an underlay/clamping set and replacement screws — a pragmatic approach for shop-floor implementation. Practical recommendations for machining and selection The single-sided chipbreaker and universal AH6225 coating perform well in medium cutting regimes and variable conditions typical of stainless steel components. For heavy interrupted cuts or extremely hard conditions, a tougher geometry or alternative grade may be preferable; for finish passes, the small corner radius delivers the required surface quality. Application-focused selection and matching of the chipbreaker to material and stability deliver the best balance between productivity and tool life. Metav Werkzeuge can provide application guidance and data to support the tooling decision. Contact Metav Werkzeuge today to discuss application-specific recommendations for Tungaloy inserts and to secure the right configuration for consistent turning results Technical Data Article number: 6951130 SKU: 6951130-Tungaloy Manufacturer SKU: TUN6951130 Manufacturer: Tungaloy Core technical data Model series: ISO-Drehwendeschneidplatten Insert designation: CCMT09T302 Grade/coating: AH6225, PVD-coated carbide Thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Size: 09 Special features Rhombic insert form Single-sided chipbreaker Hole: cylindrical with single-sided countersink (40°–60°) Universal grade for stainless steel machining System components: insert, holder/boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert designed to machine? The CCMT09T302 AH6225 Tungaloy insert is designed primarily for stainless steel and covers a broad range of stainless steel machining tasks. How does the AH6225 grade affect tool life? The AH6225 PVD-coated grade offers a balance of wear resistance and toughness, which extends edge life under medium cutting conditions and reduces the frequency of insert changes. Which holders are compatible with this insert form? Compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; the ISO rhombic CCMT form fits standard CCMT-compatible holders when these parameters match. Is the insert suitable for both external and internal turning? Yes, the geometry and one-sided chipbreaker make the insert suitable for both external and internal turning applications when paired with the appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH6225 grade and ISO‑standard CCMT geometry for consistent performance on stainless steels; the sharp yet stable cutting edge and secure clamping features reduce downtime and simplify tool selection. Order the CCMT09T302 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 09T302 AH6225 indexable turning insert for stainless steel – Tungaloy A CCMT09T302 AH6225 indexable insert engineered for external and internal turning of stainless steels, delivering a sharp, stable edge and reliable chip control in medium machining. ISO rhombic CCMT 09 geometry PVD‑coated AH6225 carbide for stainless steel 0.2 mm corner radius, 7° relief angle Cylindrical hole with single‑side countersink Consistent results through a specialised carbide grade The PVD‑coated AH6225 carbide combines a sharp cutting edge with the fracture resistance needed for changing machining conditions on stainless steel. This grade is optimised for medium cutting, offering a balance between wear resistance and edge stability that supports longer runs and predictable results. The coating enhances resistance to adhesive wear and helps maintain a uniform tool life, so process planners can rely on repeatable surface quality and reduced rework. Secure clamping and geometry that improves process stability The rhombic CCMT form with a 09 size and 0.2 mm corner radius, together with a 7° clearance angle and an 80° approach angle, provides a well‑balanced contact zone between insert and holder. The cylindrical hole with single‑side countersink (40°–60°) ensures positive location and secure clamping when used with the matching top clamp and screws. In practice, this geometry reduces vibration and supports consistent chip formation with the single‑sided chipbreaker, translating directly into improved dimensional accuracy and surface finish for turned components. Simplified tool management and integration into existing setups As an ISO‑standard insert, compatibility is defined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert integrates into typical turning systems comprising a suitable external holder or boring bar, a backing/clamping set and replacement screws. Using this universal grade can reduce the number of different inserts required for mixed stainless steel production, lowering inventory complexity while maintaining productivity. The insert’s construction from carbide combined with the PVD treatment makes it a pragmatic choice for shops seeking a cost‑effective balance between performance and longevity. For reliable stainless steel turning with the PVD‑coated AH6225 grade and secure CCMT geometry, contact Metav Werkzeuge for ordering and technical consultation: info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6829094 Manufacturer SKU: TUN6829094 SKU: 6829094-Tungaloy Designation: CCMT09T302 AH6225 Tungaloy insert Application: Turning Core data Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Approach/insert angle: 80° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Features and materials Material: Carbide (Hartmetall) Coating/grade: PVD‑coated AH6225 Geometry: Rhombic (CCMT) Chipbreaker: Single‑sided Typical use: External and internal turning Compatibility factors: Form, clearance angle, tolerance class, clamping, size, thickness FAQ Which materials is this insert intended for? The CCMT09T302 AH6225 insert is designed primarily for machining stainless steel; the AH6225 grade is a universal PVD‑coated carbide optimised for a range of stainless steel alloys. How is compatibility with toolholders ensured? Compatibility depends on matching the CCMT form, the 09 size, the 3.97 mm thickness and the 7° clearance angle; ensure the holder accepts an insert with a cylindrical hole and single‑side countersink as used on the CCMT09T302 AH6225. What cutting conditions suit the AH6225 grade? The AH6225 PVD‑coated grade is intended for medium machining and variable conditions where a sharp but stable cutting edge improves surface quality and tool life. What clamping elements are required for safe operation? Use a suitable external holder or boring bar, a backing plate/clamping set and the correct replacement screws to secure the CCMT09T302; the cylindrical hole with countersink provides positive location when clamped correctly. What effect does the 0.2 mm corner radius have on the cut? The 0.2 mm corner radius on the CCMT09T302 produces a finer edge for improved surface finish and reduced peak stresses at the cutting edge; it is suitable for finishing to medium cutting depths. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide grade AH6225 delivers a sharp, wear-resistant cutting edge for machining stainless steel, while the rhombic ISO 09 geometry with a 0.2 mm corner radius ensures stable chip control and consistent surface finish; order directly via Metav Werkzeuge or consult our technical advisors for application support. CCMT09T302 AH6225 — ISO indexable turning insert for Turning | Tungaloy A CCMT09T302 AH6225 indexable turning insert engineered for external and internal turning, optimised for medium-duty machining of stainless steel and variable production conditions. PVD-coated carbide for stainless steel Stable, sharp cutting edge Rhombic ISO 09, 0.2 mm radius Cylindrical hole with countersink Precise performance for stainless steel turning The grade combines a PVD-coated carbide substrate with the tailored AH6225 chemistry to balance edge sharpness and toughness. This configuration promotes stable chip formation under changing cutting conditions and lengthens effective edge life during medium-duty operations. For process planners, the result is a more predictable surface finish and reduced frequency of unscheduled tool changes, supporting higher overall machine uptime and better adherence to production tolerances. Robust geometry and secure clamping for reliable results Designed as a rhombic ISO insert in ISO 09 format, the geometry offers versatile cutting orientations for both external and internal turning tasks. The 0.2 mm corner radius reduces edge stress at moderate feeds while maintaining sufficient strength for interrupted cuts. Combined with a 7° relief angle, a plate thickness of 3.97 mm and a cylindrical hole with countersink (40°–60°), the insert provides secure clamping and repeatable positioning; compatibility with holders depends on form, relief angle, tolerance class, fixing method, size and thickness. System-minded design to boost shop productivity Chip control is supported by the one-sided chipbreaker, chosen to match typical turning feeds and workpiece stability. The universal nature of the grade makes it suitable across a wide range of stainless steel components, simplifying tool inventory. The complete system approach — ISO insert, matching external holder or boring bar, underlay/clamping set and spare fixing screws — allows fast changeovers and consistent repeatability. For production environments seeking lower cycle-time variability and straightforward tool management, this insert helps to streamline daily operations. Contact Metav Werkzeuge for tailored recommendations on using the Tungaloy CCMT09T302 AH6225 insert in stainless steel applications and for prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer item number: 6951115 SKU: 6951115-Tungaloy Manufacturer SKU: TUN6951115 Model series: ISO turning indexable inserts Material: Carbide Numbers / Core Technical Data Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Insert size: 09 Included angle: 80° Designs / Special Features Grade: AH6225 (PVD-coated carbide) Chipbreaker: one-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Shape: rhombic Application: Turning System components: ISO insert, compatible holder, underlay/clamping set, spare screws FAQ Can this insert machine stainless steel? Yes. The CCMT09T302 AH6225 indexable turning insert is a universal grade optimised for stainless steel and designed to provide stable chip formation and reliable edge life in medium-duty turning. Which holders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the CCMT09T302 fits standard ISO clamping systems for 09-size rhombic inserts when the holder matches these parameters. How does the 0.2 mm corner radius affect finish and strength? A 0.2 mm corner radius provides a balance between improved surface finish at moderate feeds and sufficient edge strength for common turning operations with variable workpiece stability. What is the role of the one-sided chipbreaker? The one-sided chipbreaker on this insert controls chip form and evacuation for typical turning feeds in stainless steel, helping to reduce entanglement and improve process consistency. Is this insert suitable for internal and external turning? Yes. The rhombic geometry and ISO 09 designation make the CCMT09T302 AH6225 suitable for both external and internal turning tasks when used with appropriate holders and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH6235 Wendeplatten - Tungaloy
Benefit from a robust combination of long tool life, consistent chip control and straightforward mounting for reliable turning operations; order the CCMT09T302 AH6235 indexable insert via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 AH6235 Tungaloy indexable insert for turning, 7° relief CCMT09T302 AH6235 is an ISO‑standard indexable turning insert designed for productive external and internal turning, optimised for applications with increased breakout risk. PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts Rhombic 09 form with 0.2 mm corner radius Central hole with cylindrical bore and 40°–60° countersink Increased productivity through stable cutting edges This insert is manufactured from carbide and finished with a PVD-coated surface in grade AH6235, a combination chosen to extend tool life in challenging turning conditions. The result is a cutting edge that sustains performance during longer runs and under variable engagement, which translates into fewer index changes and improved machine uptime. The PVD layer reduces adhesion and improves wear resistance, so process stability is raised while maintaining consistent dimensional control. Reliable performance on rostfreier Stahl and interrupted cuts The grade is tailored for tougher materials and intermittent cutting. When machining rostfreier Stahl, the microstructure and workhardening tendencies demand a tougher grade and effective chip control; this insert’s geometry and single-sided chipbreaker deliver predictable chip formation and reduced edge chipping. Operators achieve cleaner surfaces and fewer secondary operations, particularly in applications with frequent entry and exit of the tool edge. Practical geometry for versatile turning applications The rhombic ISO 09 shape with a 0.2 mm corner radius and a 7° relief angle provides a balance between edge strength and form accuracy. The 80° included angle supports robust support in the pocket, while the indexable insert thickness of 3.97 mm contributes to rigidity in the clamping arrangement. These dimensions help maintain stability during external turning and light internal turning, enabling a consistent finish with controlled cutting forces. Mounting and compatibility explained for straightforward selection Compatibility depends on holder form, clearance, tolerance class, fixing method, and thickness. The insert features a central hole with a cylindrical bore and a one‑sided countersink (40°–60°) for secure fastening in standard ISO pockets. Selection of a matching external holder or boring bar, plus the correct clamp and replacement screws, ensures correct seating and repeatable positioning, simplifying tool changeovers and reducing set‑up time. For application guidance, stock enquiries or to request the Tungaloy CCMT09T302 AH6235 inserts for demanding turning tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and prompt supply. Technical data Article number: 6890159 Manufacturer SKU: TUN6890159 Dealer SKU: 6890159-Tungaloy Model series: ISO indexable turning inserts Designation: CCMT09T302 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Special features PVD-coated carbide, grade AH6235 Suited for rostfreier Stahl and interrupted cuts Single-sided chipbreaker Rhombic plate form Central hole with cylindrical bore + one-sided countersink (40°–60°) ISO‑standard turning application FAQ Which materials is this insert suited for? The CCMT09T302 AH6235 Tungaloy indexable insert is specified for rostfreier Stahl and other materials where a tougher grade and good chip control are required; the AH6235 grade provides increased resistance to chipping in interrupted cuts. What does the AH6235 designation mean? AH6235 denotes a PVD-coated carbide grade developed for enhanced toughness and wear resistance; the coating reduces adhesion and improves edge stability during extended cutting. How is the insert secured in the holder? This plate is retained via its central hole with a cylindrical bore and a one-sided countersink (40°–60°); use a compatible ISO holder, matching clamp and replacement screws to ensure correct seating. What cutting geometry should be expected from the plate? The rhombic 09 form with a 0.2 mm corner radius and 7° relief angle offers a compromise between strength and finish, suitable for a range of turning operations where edge robustness is important. Is this insert suitable for internal turning? Yes—when fitted to a suitable boring bar or internal holder the insert’s geometry supports light internal turning in addition to external operations, provided rigidity and clearance are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, process-secure cutting grade combined with precise geometry for consistent turning results; the insert’s PVD-coated AH725 carbide and single-sided chipbreaker support high process reliability and good edge stability. Order directly via Metav Werkzeuge or consult our experts for application-specific selection. CCMT 09T302 AH725 indexable turning insert — PVD-coated carbide, rhombic CCMT by Tungaloy CCMT 09T302 AH725 is an ISO-standard indexable turning insert designed for external and internal turning, offering a small 0.2 mm nose radius and an 80° approach angle for versatile finishing and light roughing operations. PVD-coated carbide grade AH725 Robust single-sided chipbreaker geometry Rhombic CCMT form with 0.2 mm nose ISO compatibility and standard fixing Reliable performance for mixed-material turning The PVD-coated AH725 carbide grade delivers a balanced combination of wear resistance and toughness, making the insert particularly suited for machining Stahl and rostfreier Stahl in variable production environments. The rhombic CCMT form and 0.2 mm nose radius provide predictable contact conditions, which reduces vibration and helps maintain surface quality. This design is especially beneficial when handling frequent material changes or when toolholders are compact and rigidity is limited. Improved process security and chip control Built with a single-sided chipbreaker, the insert supports controlled chip formation across a range of cutting parameters, aiding chip evacuation and reducing the risk of built-up edge. The insert’s geometry, together with the PVD-coated surface, contributes to stable cutting forces and repeatable tool life, which can reduce downtime and achieve consistent component tolerances. Those seeking measurable process improvements will value the combination of edge stability and chip management. Compatibility, clamping and mounting considerations The insert conforms to ISO specifications for CCMT-type plates and requires a compatible external holder or boring bar; compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness. The plate features a cylindrical hole with a single-sided countersink (40°–60°) and a plate thickness of 3.97 mm, which suits common ISO clamping systems. Checking holder geometry and clearance angles ensures optimal seating and repeatable clamping for serial production. Small-radius finishing and tool-life balance With an 80° approach angle and 7° clearance, the geometry favours fine surface results while maintaining enough robustness for light to moderate material removal. The compact nose radius is ideal for achieving tight profile detail and controlled cutting engagement. The universal characteristics of the grade make it an efficient choice when a single insert must cover both Stahl and rostfreier Stahl applications without frequent tool changes. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and assistance selecting the correct holder or chipbreaker for the specific application; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6856763 SKU: 6856763-Tungaloy Manufacturer SKU: TUN6856763 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating / grade: AH725 (PVD-coated) Shape / size: rhombic, 09 Thickness: 3.97 mm Nose radius: 0.2 mm Approach angle: 80° Clearance angle: 7° Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Facts Compatible with ISO CCMT holders Small 0.2 mm nose for finishing Plate thickness 3.97 mm for common clamping Countersink suited to standard fixing screws Special features Universal, break-resistant grade for Stahl and rostfreier Stahl Good process security with stable edge life PVD-coated carbide for balanced wear resistance and toughness Suitable for external and internal turning applications Designed for applications with high demands on process reliability FAQ What materials is this insert suitable for? The CCMT 09T302 AH725 insert is specified for machining Stahl and rostfreier Stahl; the AH725 grade gives a universal balance of wear resistance and toughness for mixed-material environments. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the insert is ISO-standard CCMT and fits holders designed for CCMT 09 inserts with the corresponding clamping and countersink arrangement. How does the chipbreaker affect machining? The single-sided chipbreaker promotes predictable chip formation and evacuation, improving process security and reducing the likelihood of built-up edge during turning with moderate cutting parameters. Is the insert suitable for finishing operations? Yes — the 0.2 mm nose radius, 80° approach angle and 7° clearance make it well suited to fine finishing and light profile work while retaining edge robustness. What are the advantages of the AH725 grade? AH725 is a PVD-coated carbide grade that offers universal performance with good edge stability and wear resistance, especially where varied material batches and high process reliability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade AH725 and a stable 80° rhombic geometry for reliable, breakage-resistant turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T302 AH725 Tungaloy turning insert — PVD-coated carbide, 80° rhombic form CCMT09T302 AH725 Tungaloy is an ISO-compliant indexable insert for external and internal turning, offering a universal, breakage-resistant grade suited to varied steels and stainless steels Universal PVD-coated carbide grade AH725 80° rhombic geometry for stable cutting 0.2 mm corner radius for accurate profile control Cylindrical hole with 40°–60° countersink Maximise process security with a universally applicable carbide grade The PVD-coated carbide AH725 delivers consistent performance across varying production demands. This ISO turning insert is engineered for applications where material mixes and tool size changes occur frequently; the chosen grade balances good edge stability with economical wear behaviour. The coating improves resistance to built-up edge and thermal overload, which supports more reliable cycle results and reduces unexpected downtime. The insert is therefore well suited to environments prioritising steady output and repeatable component quality. Clear compatibility rules for fast tool set-up and low risk Compatibility with a clamping system is defined by the insert's shape, clearance angle 7°, tolerance class, attachment, size and thickness 3.97 mm. These objective parameters simplify selection of a matching external holder or boring bar and reduce set-up iterations. Because the insert conforms to ISO norms, it integrates smoothly into existing tool systems: matching the holder by the same ISO designation avoids misfits and protects against unstable clamping that could otherwise lead to premature edge failure. Broad material range and controlled chip formation for efficient turning The indexable plate is optimised for machining steel and stainless steels; the single-sided chipbreaker promotes consistent chip control in common turning operations and helps maintain surface quality in both roughing and finishing passes. The combination of grade and chipformer supports stable cutting forces and reduces the likelihood of edge chipping, improving first-pass yield. For shops processing mixed batches or switching from roughing to finishing, the insert offers a practical compromise between toughness and wear resistance. Design details that aid handling, indexing and repeatable accuracy The rhombic form with an 80° angle and corner radius 0.2 mm keeps cutting forces predictable while permitting accurate profile work close to shoulders. The insert features a cylindrical hole with single-sided countersink (40°–60°) which secures positive seating and easy replacement with standard clamping kits. The overall geometry and 3.97 mm thickness contribute to rigidity within the tool assembly, helping to reduce vibration and extend tool life. These practical design choices translate into fewer stoppages, less manual adjustment and a steadier production flow. For tailored advice on applying the CCMT09T302 AH725 Tungaloy turning insert or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6865192 Manufacturer SKU: TUN6865192 SKU: 6865192-Tungaloy Brand: Tungaloy ISO designation: CCMT09T302 Application: Turning Material: Carbide Facts Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Thickness: 3.97 mm Insert size: 09 Countersink angle: 40°–60° Special features PVD-coated carbide grade AH725 Single-sided chipbreaker Rhombic form (80°) Cylindrical hole + single-sided countersink ISO-compliant indexable insert Universal, breakage-resistant for steel and stainless steels Suitable for external and internal turning FAQ What materials is this insert suited for? The CCMT09T302 AH725 Tungaloy insert is designed primarily for steel and stainless steels, with the AH725 grade offering a balance of toughness and wear resistance for mixed-material production. How is holder compatibility ensured? Compatibility depends on the insert's shape, clearance angle (7°), tolerance class, attachment method, size and thickness; matching the ISO designation CCMT09T302 with an appropriate holder ensures correct seating and clamping. What benefits does the PVD coating provide? The PVD-coated carbide of this Tungaloy plate improves edge life and thermal resistance, reducing built-up edge and contributing to more consistent surface finishes during turning operations. Can this insert be used for both roughing and finishing? Yes, the combination of single-sided chipbreaker and the AH725 grade allows the insert to perform across roughing and finishing steps, particularly when machining various steels. How does the corner radius affect the machined profile? A corner radius of 0.2 mm offers improved profile accuracy and reduces the risk of tool chipping near shoulders, supporting finer detail work and repeatable part geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH8005 Wendeplatten - Tungaloy
Combining a PVD‑coated cemented carbide grade with a 0.2 mm nose radius and ISO compatibility, this insert delivers consistent, wear‑resistant performance for stable turning operations; order the CCMT09T302 AH8005 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T302 AH8005 CCMT turning insert — Tungaloy, PVD‑coated carbide, 0.2 mm radius The CCMT09T302 AH8005 is an ISO‑standard turning insert engineered for external and internal turning of heat‑resistant alloys and other hard materials, offering stable metal removal under robust machining conditions. ISO‑standard rhombic insert, 09 size PVD‑coated cemented carbide AH8005 0.2 mm nose radius for fine finishes Cylindrical hole with 40°–60° countersink Single‑sided chipbreaker for controlled chips High wear resistance and consistent cutting performance The combination of a PVD‑coated surface and a cemented carbide substrate gives long tool life and repeatable results when machining demanding alloys. The AH8005 grade is formulated for stable machining of heat‑resistant and hard workpieces, reducing flank wear and preserving cutting edge geometry. This results in fewer indexings and more predictable tool change intervals, improving process economy and supporting continuous production runs. The insert’s low nose radius contributes to improved surface finish without sacrificing edge strength. Clear guidance on holder compatibility and mounting Compatibility with a toolholder is defined by insert shape, clearance angle, tolerance class, fastening method, size and thickness. The rhombic form, 7° clearance angle and 09 size correspond to common ISO holders; the insert’s hole design — a cylindrical hole with a one‑sided countersink (40°–60°) — supports secure clamping and consistent seat location. Specifying a matching ISO CCMT external holder or boring bar and ensuring correct clamp and screw torque will maintain repeatable concentricity and minimise vibration during turning. Chip control and application suitability The single‑sided chipbreaker is tailored for predictable chip formation when turning both external and internal diameters. For mixed batches or varying stability, selecting the appropriate chipbreaker geometry and cutting data according to the workpiece material ensures reliable evacuation and reduces rework time. The grade’s PVD layer helps at higher cutting temperatures, so the insert is particularly effective for heat‑resistant alloys where thermal stability of the cutting edge is critical. Practical setup advice for productive turning Use the ISO‑compliant system build: the insert seated on a correct support pad, clamped with the recommended screw set and paired with a stable holder or boring bar to exploit the insert’s full potential. The 0.2 mm nose radius balances finish quality and edge robustness; consider modest increases in feed for roughing passes and finer feeds for finishing to leverage the radius for surface integrity. Where chip control is a priority, match the chipbreaker and adjust feed and speed to the material; for thin‑walled components, reduce cutting forces by optimising depth of cut and maintaining rigid workholding. For tailored advice on holders, cutting parameters and matching accessories for the Tungaloy CCMT09T302 AH8005 insert, contact Metav Werkzeuge — our specialists will provide application‑oriented recommendations and compatibility checks. Technical data Article number: 6775776 SKU: 6775776-Tungaloy Manufacturer SKU: TUN6775776 Model series: ISO turning inserts Material: cemented carbide Core data Insert designation: CCMT09T302 Insert size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Top angle: 80° Countersink angle: 40°–60° Special features PVD‑coated grade AH8005 Rhombic form Cylindrical hole with one‑sided countersink Single‑sided chipbreaker For external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for heat‑resistant alloys? Yes. The CCMT09T302 AH8005 insert uses a PVD‑coated cemented carbide grade designed specifically for wear resistance and thermal stability when machining heat‑resistant alloys. Can the insert be used for internal turning as well as external turning? Yes. The geometry and chipbreaker of the CCMT09T302 AH8005 support both external and internal turning when paired with a compatible ISO boring bar or holder. What determines which holder fits this insert? Holder compatibility depends on insert form, clearance angle (7°), tolerance class, fastening method, insert size (09) and thickness (3.97 mm); selecting an ISO CCMT‑compatible holder with matching seat and clamp is essential. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker provides reliable chip control for a range of materials and improves evacuation in many turning operations; matching chipbreaker style to workpiece material enhances process stability and surface finish. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Combining a PVD-coated carbide AH8015 grade, a precise 0.2 mm corner radius and the ISO CCMT form delivers consistent edge life and versatile performance for general turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal cutting data. CCMT 09T302 AH8015 Turning Insert (Tungaloy) — ISO rhombic indexable insert, PVD-coated carbide CCMT09T302 AH8015 is an ISO-format, rhombic indexable turning insert designed for both external and internal turning operations, especially where wear resistance and edge stability are required. PVD-coated carbide grade AH8015 0.2 mm corner radius for fine finishes Rhombic ISO CCMT 09 form, 80° cutting angle Single-sided chipbreaker, hole with countersink Durable performance for heat-resistant alloys The insert is supplied in a PVD-coated carbide grade AH8015, a combination optimised for machining heat-resistant and high-temperature alloys. The coating raises wear resistance while the substrate maintains cutting-edge stability, resulting in longer usable life under thermal and mechanical stress. For production environments, this balance reduces tool changes and downtime, supporting a continuous turning process with predictable tool-life intervals. Geometry that produces consistent surface quality The rhombic ISO CCMT09T302 geometry and an 80° cutting angle give a reliable cutting engagement and good access in shoulder and profiling work. The 0.2 mm corner radius enables improved surface finish without compromising edge strength, suitable for finishing passes or light semi-finishing where a controlled cutting line is required. The plate thickness of 3.97 mm supports rigidity, which helps to reduce vibration and improve repeatability of part tolerances. Built for easy mounting and secure clamping Compatibility with holders is determined by seat form, relief angle, tolerance class, fastening method, size and thickness; the insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) to fit standard clamping systems. Inserts are intended for use with a matching external holder or boring bar, base shim and clamping set, and replacement clamp screws. Choosing the correct seat and clamp prevents movement under cutting load and supports reproducible positioning during index changes. Single-sided chip control and application guidance The one-sided chipbreaker geometry supports predictable chip formation for a range of steels and alloys, improving evacuation during external and internal turning. For best results, select the chipbreaker and grade combination suitable for the workpiece material and machining stability; higher feeds and interrupted cuts will benefit from the robust edge provided by the AH8015 grade. Cutting parameters can be increased moderately compared with uncoated grades while maintaining acceptable tool life. For tailored cutting data, holder matching and immediate availability of genuine Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical advisors will recommend the best grade and clamping solution for the intended turning task. Technical data Article number: 6775777 Manufacturer SKU: TUN6775777 Model series: ISO turning indexable inserts Material: cemented carbide Grade: AH8015 ISO designation: CCMT09T302 Insert size: 09 Shape: rhombic Corner radius: 0.2 mm Thickness: 3.97 mm Core specifications Relief/clearance angle: 7° Cutting angle: 80° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Coating: PVD-coated Special features Suited to heat-resistant alloys Balanced wear resistance and edge stability ISO-compatible clamping and indexing Recommended for general-purpose turning and finishing FAQ What materials is this insert suited for? The CCMT09T302 AH8015 insert is designed primarily for heat-resistant alloys; the PVD-coated AH8015 grade provides a balanced combination of wear resistance and edge stability suitable for a wide range of challenging steels and alloys. How should the insert be clamped in a holder? Use a compatible ISO seat and the correct clamping set for the rhombic CCMT form; the CCMT09T302 AH8015 insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure secure and repeatable mounting. Can this insert be used for both external and internal turning? Yes — the geometry and single-sided chipbreaker make the CCMT09T302 AH8015 suitable for both external and internal turning operations when paired with the appropriate external holder or boring bar. What cutting edge life can be expected compared with uncoated grades? The PVD coating on the AH8015 grade improves wear resistance and typically extends edge life versus uncoated carbide under comparable cutting conditions, though actual life depends on material, feeds and cutting speed. Which suppliers supply genuine replacement inserts and technical advice? Metav Werkzeuge supplies genuine Tungaloy inserts such as the CCMT09T302 AH8015 and can provide holder-matching advice and cutting-parameter recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Reliable turning performance with long tool life is achieved by the combination of a PVD‑coated carbide grade and a compact 0.2 mm corner radius, ensuring stable chip control and consistent surface quality in demanding operations. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CCMT 09T302 AH8015 Tungaloy turning insert — PVD‑coated carbide, 0.2 mm radius The CCMT 09T302 AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys with a balanced focus on wear resistance and edge stability. ISO rhombic insert, 80° cutting angle PVD‑coated AH8015 for heat‑resistant alloys 0.2 mm corner radius for smooth finishing Cylindrical hole with 40°–60° countersink Engineered for reliable, efficient turning of difficult alloys The CCMT09T302 AH8015 insert combines a PVD‑coated carbide substrate with a geometry tailored to maintain edge life under elevated temperatures. The 80° cutting angle and rhombic form deliver rigidity for straight turning passes, while the single‑sided chipbreaker enhances chip formation under interrupted cuts. These technical choices translate into measurable shop‑floor benefits: longer tool life, reduced regrinding intervals and fewer workpiece rejects due to surface defects. Engineers and planners will appreciate the reproducible performance when processing heat‑resistant and high‑temperature alloys. Precision geometry for consistent surface finish and process stability The insert’s 0.2 mm corner radius and 7° clearance promote a controlled contact footprint that reduces vibration and enhances surface finish on turned components. The cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping in compatible toolholders, maintaining repeatable clamping position and torque. For manufacturers focused on dimensional accuracy and batch consistency, these features reduce setup time and improve first‑pass yield. Where finish is critical, the geometry aids in avoiding chatter and minimises the need for secondary operations. AH8015 grade: balanced wear resistance and edge stability The AH8015 grade is a versatile, PVD‑coated option selected for general machining of heat‑resistant alloys; it offers an equilibrium between abrasion resistance and cutting‑edge robustness. In practical terms, the grade supports productive cutting parameters without sacrificing reliability: steady flank wear progression, predictable tool life and stable cutting edges under fluctuating temperatures. For production environments that prioritise throughput and low variance, the grade helps to maintain machining windows and reduces unexpected downtime. Workshop compatibility and handling guidance These ISO‑standard inserts conform to established clamping and tolerance classes, so compatibility depends on holder form, free angle, fastening method, size and thickness. The plate thickness of 3.97 mm and 09 size suit a wide range of external holders and boring bars; the rhombic shape enables both finishing and moderate roughing tasks. Indexing and replacement are straightforward: use the defined screw and clamp set and check seating surfaces for cleanliness before tightening. Proper selection of the holder and cutting data ensures optimal chip control and tool life. For application advice on Tungaloy AH8015 inserts or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitable holders and cutting parameters Technical data Article number: 6951131 SKU: 6951131-Tungaloy Manufacturer SKU: TUN6951131 Manufacturer article number: 6951131 Manufacturer: Tungaloy Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 80° Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Special features ISO‑standard rhombic insert PVD‑coated grade AH8015 Material: carbide Single‑sided chipbreaker Compatible with external holders and boring bars Typical use: external and internal turning of heat‑resistant alloys FAQ What materials is this insert suitable for? The CCMT09T302 AH8015 Tungaloy turning insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for productive machining. Is the insert compatible with standard ISO toolholders? Yes. The ISO‑standard rhombic form, thickness of 3.97 mm and the defined hole/countersink make the insert compatible with matching holders that accept 09‑size plates. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a compromise between strength and finish: it supports good surface quality while protecting the cutting edge during moderate loads. What does the hole style mean for clamping? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure seating and repeatable clamping in holders designed for this hole style. Can the insert be used for interrupted cuts? The combination of the rhombic form, robust grade and single‑sided chipbreaker gives the insert increased resistance to edge chipping, making it suitable for light to moderate interrupted cutting. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 carbide for heat‑resistant alloys, ISO‑standard CCMT compatibility and a 0.2 mm corner radius for stable cutting performance. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCMT 09T302 AH8015 — Tungaloy turning indexable insert, PVD‑coated carbide The CCMT09T302 AH8015 is an ISO indexable insert for external and internal turning, engineered for balanced wear resistance and edge stability in heat‑resistant alloys. ISO‑standard CCMT insert, compatible with holders PVD‑coated carbide AH8015 for heat‑resistant alloys 0.2 mm corner radius for reliable edge stability Cylindrical hole with single‑sided countersink Higher productivity when machining heat‑resistant alloys The PVD‑coated AH8015 grade combines carbide substrate strength with a wear‑resistant surface layer to deliver a balance between edge stability and longevity. This combination makes the insert particularly suitable for parts manufactured from heat‑resistant alloys where thermal loads and abrasive wear shorten tool life. The protective coating reduces flank wear and helps maintain a consistent cutting edge, which in turn supports higher material removal rates and fewer tool changes—resulting in measurable gains in machine uptime and process economy. Clear compatibility reduces setup time ISO conformity and the CCMT geometry ensure compatibility with a wide range of standard external holders and drill‑rod style carriers. The rhombic plate form and included angle 80° provide a predictable seating and force direction during turning operations. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) secures repeatable clamping and simple replacement without special adapters. Compatibility is determined by form, relief angle, tolerance class, fastening and plate dimensions, so selection of the correct holder and clamping set is essential for a stable process. Consistent surface quality with controlled chip formation The 0.2 mm corner radius strengthens the cutting edge against chipping while the single‑sided chipbreaker manages chip flow for most turning tasks. A defined corner radius increases edge robustness when interrupted cuts or variances in feed occur, improving resistance to mechanical shock. The chipbreaker geometry is optimised for turning; it eases chip evacuation and contributes to consistent surface finishes by preventing uncontrolled chip re‑cutting. For operators with limited experience in carbide grades, the chipbreaker and radius together provide a forgiving balance between finish and tool life. Practical selection and application guidance For reliable results, match the AH8015 grade and the single‑side chipbreaker to the workpiece material and the machine setup. The insert suits both external and internal turning; choose a holder that supports the plate thickness of 3.97 mm and the plate size to maintain rigidity. When machining heat‑resistant alloys, prioritise stable clamping and conservative axial depths on first trials, then increase cutting parameters as process stability is proven. The combination of PVD coating, grade and geometry enables an efficient trade‑off between productivity and predictable tool life for batch and single‑part production alike. For assured performance with Tungaloy turning inserts, contact Metav Werkzeuge for tailored advice and availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951116 Manufacturer SKU: TUN6951116 Model series: ISO‑indexable turning inserts Material: carbide Grade: AH8015 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Special features PVD‑coated carbide, grade AH8015 Rhombic plate form Cylindrical hole with single‑sided countersink (40°–60°) Single‑sided chipbreaker ISO indexable insert for external and internal turning Suitable for heat‑resistant alloys FAQ Which materials is this insert intended for? The CCMT09T302 AH8015 insert from Tungaloy is intended primarily for machining heat‑resistant alloys, offering a compromise between wear resistance and edge stability suited to these demanding materials. Is the CCMT09T302 compatible with standard CCMT holders? Compatibility follows ISO CCMT geometry, but correct seating requires matching holder form, relief angle, tolerance class, fastening method, plate size and thickness to ensure secure clamping. What benefit does the AH8015 coating provide? The PVD coating on the AH8015 grade reduces abrasive wear and improves thermal resistance, contributing to longer flank life and steadier cutting performance in high‑temperature applications. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius enhances cutting edge toughness and helps prevent chipping under variable loads, while still permitting fine surface finishes when feeds are adjusted appropriately. What chip control can be expected with the single‑sided chipbreaker? The single‑sided chipbreaker directs chip flow for turning operations, aiding evacuation and reducing the risk of re‑cutting, which supports consistent surface quality and safer cycle operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high‑quality finishing, consistent wear resistance and ISO compatibility for predictable machining results; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the team for application advice. CCMT 09T302 AT9530 Tungaloy indexable turning insert, rhombic, 0.2 mm radius The CCMT 09T302 AT9530 is an ISO‑standard indexable turning insert designed for finishing and light turning of steel components. ISO standard rhombic insert 09 size Coated cermet grade AT9530 for fine finishing 0.2 mm corner radius for accurate profiles 7° clearance angle for reliable contact Superior surface quality for finishing passes The coated cermet grade AT9530 is engineered for finishing and light machining of steel, delivering a noticeably improved surface finish and reduced tendency for built‑up edge. The material combination provides uniform wear across the cutting edge, which helps to maintain dimensional accuracy over repeated indexings. Specified as a finishing grade, the insert is optimised to produce consistent topography on turned parts while keeping the risk of thermal and mechanical damage to a minimum. Predictable fitting and geometry for efficient setup As an ISO‑conforming rhombic insert, CCMT09T302 offers straightforward interchangeability in compatible toolholders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The geometry includes a 0.2 mm corner radius and 7° clearance, which together allow for precise profile generation and controlled tool‑workpiece contact. The insert’s rhombic shape and standard fixing hole simplify clamping on external holders and boring bars, reducing setup time and supporting repeatable machining cycles. System integration and process benefits The insert is intended for use as part of a complete tool system comprising an ISO turning insert, a matching external holder or boring bar, a clamp plate and replacement screws. With a single‑sided chipbreaker and the grade’s wear characteristics, the component supports consistent chip formation and reduced rework in finishing operations. Selecting the correct chipbreaker and grade for the workpiece and machining conditions improves productivity and lowers unit cost through fewer tool changes and predictable tool life. For precision finishing of steel parts, request technical advice from Metav Werkzeuge and specify the genuine Tungaloy CCMT 09T302 AT9530 insert for consistent results; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 and can advise on holder compatibility and process settings. Technical data Article number: 6773729 Manufacturer SKU: TUN6773729 Model series: ISO‑turning indexable inserts Product name: CCMT09T302 AT9530 Tungaloy insert Core specifications Corner radius: 0.2 mm Clearance angle: 7° Insert thickness: 3.97 mm Insert size: 09 Included hole: with hole Design & features Coated cermet grade AT9530 Rhombic insert geometry Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Application: turning; finishing and light machining of steel FAQ What materials is this insert suited for? The CCMT 09T302 AT9530 insert is specified for finishing and light machining of steel; the AT9530 coated cermet grade focuses on achieving superior surface finish and controlled wear when turning steel components. How does the insert fix to the holder? The insert features a central hole with a cylindrical bore and a single‑side countersink (40°–60°), designed for clamping with a matched clamp plate and screw in ISO external holders or boring bars compatible with CCMT geometry. What size and geometry should be expected for profile work? This indexable insert is size 09, rhombic in shape, with a 0.2 mm corner radius and a 7° clearance angle, making it suitable for accurate profile generation and fine finishing passes. Can the chip control be adapted for different operations? The insert comes with a single‑sided chipbreaker; matching the chipbreaker and grade selection to the workpiece and machining parameters will optimise chip formation and tool life for finishing tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 DX120 Wendeplatten - Tungaloy
Benefit from the combination of the DX120 PCD cutting grade, a precise 0.2 mm cutting-edge radius and robust rhombic geometry to achieve higher cutting speeds and extended tool life; order the Tungaloy insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. CCMT09T302 DX120 Tungaloy turning insert — PCD grade for high-speed aluminium and non-ferrous machining CCMT09T302 DX120 is a rhombic ISO turning insert engineered for high-speed machining of aluminium, non-ferrous and abrasive non-metallic materials, supplied with a single-sided chipbreaker and a cylindrical hole with one-sided countersink. PCD grade DX120 for aluminium machining Single-sided chipbreaker for stable chip control 80° rhombic geometry for versatile turning Cylindrical hole with 40°–60° countersink Increase throughput with a PCD grade made for aluminium The polycrystalline diamond (PCD DX120) cutting material delivers exceptional wear resistance when machining aluminium and other non-ferrous alloys, enabling significantly higher cutting speeds and longer tool life compared with conventional grades. This results in shorter cycle times and fewer insert changes, which directly improves process economy and reduces downtime. The high abrasion resistance also supports consistent surface finish over extended production runs. Geometry and secure clamping for repeatable accuracy The rhombic 80° insert form combined with a 7° clearance angle and a 0.2 mm corner radius provides a balance between robustness and fine surface generation. Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the ISO designation ensures straightforward matching to standard external holders or boring bars. The supplied cylindrical hole with one-sided countersink (40°–60°) supports reliable clamping and simple screw replacement. Application-specific chip control and material guidance A single-sided chipbreaker must be selected in conjunction with the DX120 grade to match the workpiece material and machining stability. This combination is optimised for aluminium, Messing and abrasive non-metals where chip formation and evacuation are critical. The insert’s characteristics favour continuous, stable chips and minimise built-up edge, helping to maintain dimensional accuracy and reduce secondary finishing. Practical benefits for production and tooling strategy Integrating high-performance inserts of this specification into a turning cell reduces tooling intervals and increases first-pass yield. The design supports both external and internal turning operations when paired with an appropriate holder, underlining the importance of selecting holders and clamping sets that match the insert’s form and dimensions. Over the life cycle, fewer tool changes and consistent part quality result in lower unit costs and greater process reliability. For high-speed aluminium turning with Tungaloy expertise, contact Metav Werkzeuge for product availability and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6822153 Manufacturer SKU: TUN6822153 SKU: 6822153-Tungaloy Designation: CCMT09T302 Model series: ISO turning inserts Brand: Tungaloy Numbers / Core technical data Insert size: 09 Insert thickness: 3.97 mm Clearance angle: 7° Approach/lead angle: 80° Corner radius: 0.2 mm Designs / Special features Cutting material: polycrystalline diamond (PCD) Grade: DX120 Insert shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Material compatibility: aluminium, non-ferrous metals, abrasive non-metals Substrate/material: cemented carbide FAQ What materials is this insert best suited for? The DX120 PCD grade insert is optimised for aluminium, Messing and abrasive non-metallic materials; the PCD cutting material provides extended life and excellent surface quality in these applications. How does the chipbreaker affect performance? The single-sided chipbreaker controls chip form for stable evacuation during turning operations; selecting the chipbreaker that matches the workpiece and machining parameters is important for optimal results. Which holders are compatible with this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; use standard ISO-compatible external holders or boring bars designed for CCMT-style inserts. What does the DX120 designation mean in practice? DX120 identifies the PCD grade engineered for high cutting speeds on aluminium and similar materials, offering improved wear resistance and longer tool life compared with conventional grades. Is the insert supplied with mounting hardware? The insert is supplied as the cutting plate; the full system comprises the ISO insert, a matching external holder or boring bar, a seating pad/clamp set and replacement screws as required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 GH730 Wendeplatten - Tungaloy
Take advantage of reliable cutting performance and long edge life thanks to the GH730 grade and robust carbide substrate; the ISO rhombic geometry with a 0.2 mm nose radius delivers consistent surface finish and repeatable results. Order directly via Metav Werkzeuge or contact the team for individual machining advice. CCMT09T302 GH730 Tungaloy turning insert — ISO rhombic insert for external and internal turning CCMT09T302 GH730 is an ISO-standard indexable insert designed for turning applications; it pairs with compatible external holders and boring bars to provide stable machining across a wide range of steels and general turning tasks ISO rhombic CCMT 09 geometry GH730 carbide grade for durable cutting edges 0.2 mm nose radius for predictable finishes 7° clearance angle for secure cutting action Consistent cutting performance for productive turning The GH730 grade, built on a wear-resistant carbide substrate, provides a balanced combination of edge stability and toughness. This balance reduces unplanned tool changes and supports higher process reliability during continuous operation. With its single-sided chipbreaker and defined 0.2 mm nose radius, the insert produces a controlled chip form and a consistent surface finish, which contributes to shorter downstream operations and less rework. Choosing the correct chipbreaker and grade for the workpiece material supports cycle-time reduction and optimised tool costs. Geometry and mounting that simplify tool selection The ISO rhombic form and the CCMT designation make selection straightforward for users familiar with ISO insert systems. The insert’s compatibility with holders is determined by form, clearance angle (7°), tolerance class, fixing method, size and thickness. The presence of a cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and reliable repeatability in clamped assemblies. For workshops standardising toolholders, this geometry allows rapid interchangeability and predictable performance across different machine models and setups. Robust grade and dimensions for dependable results With a plate thickness of 3.97 mm and the GH730 chemistry, the insert resists flank wear while maintaining a stable cutting edge under typical turning loads. The ISO standard designation facilitates inventory management and reduces sourcing complexity. The combination of carbide construction and Tungaloy’s design focus supports extended tool life and consistent part quality, which is especially valuable in batch production and repetitive turning tasks. Technical enquiries about optimised cutting data and holder pairing are welcome to ensure the best process outcome. Contact Metav Werkzeuge for tailored recommendations on selecting the correct Tungaloy GH730 CCMT insert for your turning application and to receive detailed machining parameters. Technical data Article number: 6820966 SKU: 6820966-Tungaloy Manufacturer article number: 6820966 Manufacturer SKU: TUN6820966 Series: ISO turning indexable inserts Material: carbide Facts Size: 09 ISO code: 09T302 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Special features Grade: GH730 Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What turning operations is this insert suited for? The CCMT09T302 GH730 Tungaloy turning insert is intended for both external and internal turning where a 0.2 mm nose radius and a single-sided chipbreaker deliver reliable chip control and surface finish. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, 7° clearance angle, tolerance class, fixing method, size and thickness; the CCMT ISO designation ensures broad compatibility with standard CCMT holders and boring bars. What materials can be machined with this grade? The GH730 grade on a carbide substrate is designed as a versatile option for a wide range of steels and general turning tasks; select the chipbreaker and cutting data to match the specific workpiece material and operation. How does the insert’s hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in the pocket, reducing runout and enhancing repeatability in production setups. What finish and tolerances can be expected with the 0.2 mm radius? A 0.2 mm nose radius typically provides a good balance between strength and surface finish; it supports predictable edge engagement and can help meet typical finishing tolerances when combined with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 GH730 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, a precise 0.2 mm corner radius and ISO‑standard form for predictable, high‑quality turning results; order via Metav Werkzeuge or consult our advisors for holder recommendations. CCMT09T302 GH730 CCMT turning insert — Tungaloy ISO rhombic insert, 0.2 mm radius A CCMT09T302 GH730 indexable insert designed for ISO‑standard external and internal turning, delivering stable cutting edges and reliable chip control. GH730 grade for improved wear resistance 0.2 mm corner radius for fine surface finishes ISO rhombic CCMT form for holder compatibility Central hole with 40°–60° countersink for secure clamping Predictable cutting performance with high edge stability The GH730 carbide grade combines wear resistance and toughness to support consistent tool life under varying turning conditions. The CCMT09T302 geometry, with its 0.2 mm corner radius and 7° clearance, helps to balance surface finish and strength at the cutting edge; a small radius reduces chatter and improves finish at modest feeds, while the specified clearance angle minimises rubbing on the flank. The single‑sided chipbreaker offers controlled chip formation for many turning tasks, reducing the risk of built‑up edge and easing swarf management for shorter cycle times and fewer interruptions. System compatibility and secure clamping for reliable results Compatibility with the toolholder is governed by the insert’s form, ISO‑standard designation, clearance angle, tolerance class, clamping type, size and thickness. The rhombic CCMT form ensures interchangeability with matching external holders and boring bars, while the central hole with cylindrical bore plus one‑sided countersink (40°–60°) provides a repeatable seating and clamping interface. A complete system includes the indexable insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws; selecting the correct combination is essential for repeatable geometrical accuracy and process stability. Practical application scope and production benefits Intended for general turning operations, the insert suits both external and internal turning where a moderate corner radius and robust edge are required. Its carbide construction and the GH730 grade prioritise productivity by extending tool life and maintaining a stable cutting edge under fluctuating loads. This leads to fewer insert changes, lower machine downtime and a more predictable part quality — advantages that directly support efficient production workflows and consistent surface finishes. For customers seeking guidance on grade selection or chipbreaker pairing for specific workpiece materials, targeted advice is available to align insert choice with machining stability and finish requirements. For consistent, high‑productivity turning with the GH730 grade, contact Metav Werkzeuge for tailored holder recommendations or to arrange a supply of CCMT09T302 Tungaloy inserts via our sales team. Technical data Article number: 6820967 Manufacturer SKU: TUN6820967 Model series: ISO‑turning indexable inserts Numbers / Core technical data Insert designation: CCMT09T302 Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included hole: with hole (cylindrical + one‑sided countersink 40°–60°) Designs / Special features Geometry: rhombic (CCMT) Chipbreaker: single‑sided Material: carbide Grade: GH730 System components: insert, holder, shim/clamp set, replacement screws FAQ What turning tasks is this insert suited for? The CCMT09T302 GH730 insert is intended for ISO‑standard external and internal turning where a moderate corner radius and reliable edge stability are required, covering common finishing and semi‑finishing operations. How does the 0.2 mm corner radius affect the surface finish? A 0.2 mm radius reduces the likelihood of chatter at moderate feeds and improves surface quality compared with larger radii; the GH730 grade helps maintain edge integrity to preserve finish over longer cycles. Which holders are compatible with this insert? Compatibility depends on form and ISO designation; holders designed for CCMT inserts with matching size, thickness and clamping style will fit. The central hole and countersink ensure secure seating in standard CCMT holders. What is the benefit of the single‑sided chipbreaker? A single‑sided chipbreaker provides consistent chip control in a range of cutting conditions, improving swarf handling and reducing the risk of chip entanglement during turning. Can this insert be used for hardened materials? The insert’s GH730 grade offers a balance of wear resistance and toughness suited to a broad spectrum of steels and common turning materials; for highly hardened alloys, verify suitability against specific hardness ranges and machining parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, extended tool life and secure clamping for reliable turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. CCMT 09T302 GT9530 — Tungaloy indexable turning insert for turning, coated cermet, 0.2 mm corner radius CCMT 09T302 GT9530 is a rhombic ISO indexable insert for turning, optimised for finishing to light universal operations in steel. Coated cermet grade GT9530 0.2 mm corner radius for fine surface finish 7° relief angle with 80° rhombic geometry Cylindrical hole with 40°–60° countersink Reliable finishing and longer tool life for steel turning The coated cermet specification GT9530 delivers a balance between surface quality and extended tool life, making this insert well suited to finishing and light general-purpose turning of steel. The coating reduces adhesive wear and improves thermal stability under steady cutting conditions, which results in a more consistent part finish and fewer changeovers. This grade is particularly effective where a combination of surface finish and sustained performance is required in production runs. Secure clamp interface and ISO compatibility Designed as an ISO indexable insert, compatibility with a clamping system is governed by insert form, relief angle, tolerance class, fastening style, size and thickness. The central cylindrical hole with a one-sided countersink (40°–60°) ensures reliable seating and repeatable positioning in standard holders and boring bars. The ISO conformity simplifies tool inventory and reduces setup time by enabling interchangeability across appropriately specified holders. Precision geometry for predictable chip control and accuracy The corner radius 0.2 mm and one-sided chipbreaker promote fine finishing and predictable chip formation during low to moderate depths of cut. The 7° relief angle and 80° rhombic geometry support stable cutting and access to tight features, while the insert thickness of 3.97 mm provides sufficient support for the cutting edge. These geometry choices reduce vibration and help maintain dimensional accuracy, particularly important in finishing passes and close-tolerance turning. Process guidance for productive, stable machining For productive and stable machining, select the chipbreaker and grade that match the workpiece material, machining parameters and fixture rigidity. The insert is tailored for turning applications where consistent cutting conditions are maintained; the combination of GT9530 performance and insert geometry can reduce tool change frequency and support higher overall process efficiency. Technical consultation is available for matching insert grade and chipbreaker to specific steels and turning strategies. For precision finishing in steel applications, choose Tungaloy’s GT9530-coated CCMT 09T302 insert and contact Metav Werkzeuge for tailored application advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6998300 Manufacturer SKU: TUN6998300 SKU: 6998300-Tungaloy Model series: ISO indexable turning inserts Cutting grade: GT9530 Base material: cemented carbide Facts Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Insert thickness: 3.97 mm Insert size: 09 Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic insert geometry One-sided chipbreaker Coated cermet grade GT9530 Intended for finishing to light universal turning of steel Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The CCMT 09T302 GT9530 insert is intended primarily for turning of steel and is optimised for finishing to light general-purpose operations. How does the GT9530 coating affect tool life? The GT9530-coated cermet improves wear resistance and thermal stability, which extends the service life of the insert in stable cutting conditions. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO indexing standards; compatibility depends on holder form, relief angle, tolerance class, fastening and insert size/thickness. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a one-sided countersink ensures secure seating and repeatable clamping in compatible holders and boring bars. Which chipbreaker should be chosen for finishing operations? For finishing, select a chipbreaker that promotes small, controllable chips; the one-sided chipbreaker on this insert is designed to support fine surface finishes and stable cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T302 H13A Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 09T302 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T302KFH13A-SANDVIK Figures for the tool: ISO-Code: CCMT09T302 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T302-H13A-Sandvik 40END
CCMT 09T302 IC20N Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product features for CCMT 09T302 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T302IC20N Series: TURNING CERMET ISO-Code: CCMT09T302 Grade: IC20N Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-09T302-IC20N-ISCAR 40END
CCMT 09T302 IC520N Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 09T302 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T302IC520N Facts for the tool: ISO-Code: CCMT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: IC520N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-09T302-IC520N-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com