Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a PVD-coated AH8015 grade for heat-resistant alloys and a compact 0.4 mm corner radius to secure consistent turning results; order genuine inserts via Metav Werkzeuge or consult the team for application-specific advice. CCMT09T304 AH8015 ISO turning insert — PVD-coated carbide, 0.4 mm radius The CCMT09T304 AH8015 indexable insert is an ISO-standard rhombic turning insert designed for external and internal turning of heat-resistant alloys and general-purpose machining. PVD-coated carbide for heat-resistant alloys Rhombic CCMT shape, 80° included angle 0.4 mm corner radius for precise profiling Central hole with countersink for secure clamping Consistent cutting performance that reduces machining cost The balance between wear resistance and edge stability is achieved by the AH8015 grade with its PVD-coated surface, which delivers predictable tool life when machining demanding alloys. This indexable insert is engineered for steady flank-wear behaviour under moderate to high cutting temperatures, so machining cycles remain stable and setup changes are minimised. The economic benefit derives from fewer insert changes and reduced rework, supporting a more efficient production flow without sacrificing surface quality. Secure mounting and ISO compatibility for reliable repeatability Manufactured to ISO dimensions, the insert fits standard CCMT holders when matched by form, relief angle, tolerance class, fixing method, size and thickness. The central feature is a central hole with a countersink (cylindrical hole plus single-sided countersink, 40°–60°), which ensures repeatable clamping and concentric seating in a suitable holder. The combination of standard geometry and secure fixation enhances process reliability and simplifies tool inventory management across multiple machines. Targeted application advice for material and chip control This grade is intended as a first choice for machining heat-resistant alloys where a compromise between long life and edge toughness is required. The single-sided chipbreaker supports controlled chip formation for many turning operations; selecting the correct chipbreaker and insert grade according to workpiece material, cutting parameters and machine stability will yield the best results. The plate’s rhombic form and 80° included angle favour general turning and profiling tasks, offering versatility across external and internal operations. Practical handling, geometry and setup benefits With a corner radius of 0.4 mm, an included angle of 80° and a plate thickness of 3.97 mm, the insert allows fine profile definition while maintaining sufficient edge strength for interrupted cuts. The 7° relief angle aids in reducing rubbing and heat build-up, improving surface finish and reducing the tendency to form built-up edge. As an indexable solution, the insert supports rapid seat replacement and lower downtime compared with brazed tools, helping to keep throughput high in serial production. Contact Metav Werkzeuge for application-specific recommendations and to obtain genuine Tungaloy CCMT09T304 AH8015 inserts; technical advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6749960 Manufacturer SKU: TUN6749960 SKU: 6749960-Tungaloy Material: carbide Designation: CCMT09T304 Facts Corner radius: 0.4 mm Thickness: 3.97 mm Included angle: 80° Relief angle: 7° Size designation: 09 Special features PVD-coated carbide grade AH8015 Rhombic plate form (CCMT) Central hole with cylindrical bore and single-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard turning insert for external and internal turning FAQ What materials is this insert best suited for? The CCMT09T304 AH8015 insert is intended primarily for machining heat-resistant alloys and is a versatile choice for general turning tasks where a balance of wear resistance and edge stability is required. Which holders are compatible with this insert? Compatibility depends on holder geometry and specification; the CCMT09T304 follows ISO dimensions, so holders matching the CCMT form, size 09 and corresponding tolerance class will be suitable. How does the clamping design affect repeatability? The central hole with a cylindrical bore and single-sided countersink (40°–60°) on the CCMT09T304 promotes secure seating and repeatable clamping, improving concentricity and process stability. What chip control features are included? This insert is supplied with a single-sided chipbreaker to support controlled chip formation; the choice of chipbreaker should be matched to material, cutting conditions and machine rigidity. What geometry details aid in profiling and strength? The combination of a 0.4 mm corner radius, 80° included angle and 3.97 mm thickness gives a balance of precise profile capability and sufficient edge strength for many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade optimised for heat-resistant alloys and a precise 0.4 mm nose radius for consistent edge stability and surface finish. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. CCMT09T304 AH8015 indexable turning insert — ISO rhombic 80°, PVD-coated carbide, Tungaloy The CCMT09T304 AH8015 is an ISO rhombic 80° indexable insert for turning, designed for general machining of heat-resistant alloys where balanced wear resistance and cutting-edge stability are required. PVD-coated carbide for heat-resistant alloys Balanced wear resistance and edge stability 0.4 mm nose radius for precise profiling ISO 80° rhombic form with cylindrical hole Consistent cutting performance for demanding alloys The combination of the AH8015 grade and PVD-coated carbide provides a balance between wear resistance and edge robustness that is particularly beneficial when machining heat-resistant alloys. This material pairing reduces flank wear under elevated temperatures and extends useful tool life, which contributes to lower tooling costs per component. The modest nose radius and stable cutting geometry support repeatable surface quality while the single-sided chipbreaker helps to control chip formation during standard turning tasks. Clear compatibility and straightforward clamping for reliable setup As an ISO indexable insert, compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic 80° shape and the 7° relief are standard references that ease holder selection; the with hole design (cylindrical hole plus single-side countersink at 40°–60°) simplifies secure fastening and repeatable seating. These aspects reduce setup time and make inserts interchangeable across matched holders, supporting predictable production runs and faster changeovers. Edge control and chipforming tuned to practical machining needs The integrated single-sided chipbreaker and the AH8015 substrate offer controlled chip formation and a reliable cutting edge during medium-duty turning. For operations that require a blend of durability and edge stability, this combination keeps the cutting edge intact longer and reduces unplanned tool changes. The insert supports both external and internal turning when paired with an appropriate holder and clamping set, enabling versatile use across common lathe applications. Practical application advice and workshop integration The plate thickness of 3.97 mm, the 80° rhombic outline and the 0.4 mm nose radius make this insert suitable for profiling, general finishing and stable roughing in restrained setups. Select the chipbreaker and grade according to workpiece material and machine rigidity; for example, choose a stiffer setup for heavier cuts to preserve edge life. Check holder compatibility before installation and ensure correct torque for clamping screws and proper seating on the support shim to maintain repeatable results. For machining advice or supply of Tungaloy CCMT09T304 AH8015 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt delivery. Technical data Article number: 6749954 Dimensions / Key figures Nose radius: 0.4 mm Thickness: 3.97 mm Size: 09 Clearance angle: 7° Corner angle: 80° Special features Material: carbide, PVD-coated (AH8015) Single-sided chipbreaker Rhombic 80° form With cylindrical hole + single-side countersink (40°–60°) ISO turning insert series Typical application: turning (external and internal) FAQ Which materials is this insert best suited for? The CCMT09T304 AH8015 insert is formulated for machining heat-resistant alloys, offering a compromise between wear resistance and edge stability that favours performance in such materials. What is the nose radius and what does it mean for finishing? The nose radius is 0.4 mm; this allows finer profile control and improved surface finish while still providing enough strength for routine turning operations with moderate depths of cut. How is the insert secured in the holder? The plate is supplied with hole—a cylindrical hole plus a single-side countersink (40°–60°)—and requires a compatible clamping system, support shim and the correct screw to ensure repeatable seating and clamping force. Can this insert be used for internal turning? Yes, when mounted in a suitable boring bar or internal holder the insert supports internal turning; ensure holder geometry matches the ISO 80° rhombic form and clearance specifications. What chip control does the insert provide? The insert features a single-sided chipbreaker designed to improve chip control during standard turning, helping to maintain stable cutting conditions and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade focused on surface finish, a precise 0.4 mm nose radius, and ISO compatibility for reliable finishing operations; order the insert via Metav Werkzeuge or consult the technical team for application support. CCMT 09T304 AT9530 — Turning insert, coated cermet (0.4 mm nose radius) by Tungaloy A CCMT 09T304 AT9530 turning insert engineered for finishing and light turning of steel with ISO-standard form and mounting compatibility CCMT 09T304 ISO turning insert Coated cermet grade AT9530 0.4 mm nose radius for fine finish Cylindrical hole with single-sided countersink Consistent surface quality and controlled wear The insert is manufactured in a coated cermet grade (AT9530) that emphasises surface finish and uniform wear rather than aggressive metal removal. The combination of the 0.4 mm nose radius and a dedicated single-sided chipbreaker produces a stable cutting edge that reduces edge chipping during finishing passes. This results in longer intervals between edge changes and a more predictable component finish, which supports higher first-pass yield and fewer rework operations. The cermet coating lowers adhesion and helps maintain a sharp geometry at low to moderate feeds. Simple integration into ISO tooling systems Designed to the ISO designation CCMT09T304, the insert fits standard rhombic holders when form, 7° clearance angle, tolerance class, fastening and thickness are matched. The rhombic form with an included angle of 80° and a 3.97 mm thickness provides a secure seating in compatible clamping systems; the insert’s cylindrical hole with one-sided countersink (40°–60°) is suitable for common screw clamping designs. Compatibility depends on matching the insert geometry and tolerance class to the toolholder — selecting the correct combination ensures repeatable positioning and stable cutting conditions. Application focus: efficient finishing and light turning of steel Optimised for finishing and light turning of steel, the grade balances wear resistance and edge sharpness to deliver high surface integrity on external and internal profiles. The insert performs best with a stable setup and moderate cutting speeds where the cermet’s properties can produce superior finishes and even wear patterns. For different materials or heavier cuts, choose an appropriate chipbreaker and grade to match the workpiece and machining stability; for finishing tasks, the current configuration reduces the need for secondary polishing and supports efficient downstream processes. For application advice, toolholder compatibility checks or ordering the Tungaloy CCMT 09T304 AT9530 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and quick delivery options Technical data Article number: 6732746 SKU: 6732746-Tungaloy Manufacturer SKU: TUN6732746 Model series: ISO turning inserts Material: cemented carbide Numbers Size: 09 ISO code: 09T304 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features ISO designation CCMT09T304 Coated cermet grade AT9530 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning; finishing and light machining of steel FAQ Is this insert suitable for internal turning operations? The Tungaloy CCMT 09T304 AT9530 insert is designed for both external and internal turning when used with an appropriate holder and setup; the rhombic form and secure clamping via the cylindrical hole support internal applications. Which materials is the AT9530 grade best for? The AT9530 coated cermet grade is optimised for finishing and light turning of steel, offering improved surface integrity and even wear for such applications. What must be checked to ensure holder compatibility? Compatibility is determined by insert form, 7° clearance angle, tolerance class, fastening method, size and 3.97 mm thickness; confirm the toolholder accepts CCMT inserts and the mounting (hole and countersink) matches the clamping system. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius produces a finer profile on turned parts and helps maintain consistent geometry at finishing feeds, supporting reduced vibration and improved surface appearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 DX120 Wendeplatten - Tungaloy
Benefit from the combination of PCD cutting performance, extended service life and ISO-standard fit for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT 09T304 DX120 — CCMT indexable insert for turning by Tungaloy The CCMT09T304 DX120 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for aluminium, non‑ferrous metals and abrasive non‑metals and suited to high cutting speeds. PCD grade DX120 for high speeds Long tool life with very low wear ISO rhombic CCMT 09T304 form One-sided chipbreaker, 0.4 mm corner radius Consistent performance at high cutting speeds The DX120 grade uses polycrystalline diamond (PCD) to deliver exceptionally high cutting speeds and very long tool life when machining aluminium and other non‑ferrous materials. PCD cutting edges combine extreme hardness with a wear‑resistant microstructure, which reduces flank wear and keeps cutting parameters stable over long production runs. For operations where cycle time and consistent part quality determine cost per piece, this insert provides a clear efficiency advantage and lowers tool change frequency. ISO compliance and secure clamping for predictable results Supplied as an ISO-standard CCMT form, compatibility with the clamping system is defined by geometry, clearance, tolerance class, fixing method, size and thickness. The insert is supplied with a cylindrical hole plus one‑sided countersink (40°–60°) to match standard holders and clamp plates. The combination of a defined 7° clearance angle and 3.97 mm thickness ensures reliable seating and repeatable positioning, which translates to predictable dimensional control and reduced setup time when replacing inserts in production. Geometry tuned for finish and chip control The rhombic shape with an 80° geometry and a 0.4 mm corner radius delivers a balance between robustness and finishing capability. The one‑sided chipbreaker controls chip formation for thin, curled chips when turning softer materials and abrasive composites, improving evacuation and reducing the risk of built‑up edge. These design choices help maintain a steady surface quality while protecting the cutting edge during interrupted cuts. System advantages and practical application notes As part of a complete tool system the insert works with the appropriate external holder or boring bar, a supporting shim/clamp set and standard replacement screws. The PCD grade DX120 is especially economical for high‑volume aluminium components and abrasive non‑metallic materials where oxidation and edge wear limit carbide life. Selection of the matching chipbreaker and grade according to workpiece stability and machining strategy will maximise throughput and reduce overall tooling costs. Contact Metav Werkzeuge for tailored selection and delivery information on Tungaloy PCD inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6822154 Manufacturer SKU: TUN6822154 SKU: 6822154-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Core dimensions ISO designation: CCMT09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Geometry angle: 80° Features & Compatibility Grade/coating: DX120 Cutting material: polycrystalline diamond (PCD) Application: turning (external and internal) Chipbreaker: one‑sided Hole: with cylindrical hole + one‑sided countersink (40°–60°) Insert shape: rhombic Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The CCMT09T304 DX120 grade is designed for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, offering high cutting speeds and prolonged edge life. Can the insert be used for both external and internal turning? Yes, the ISO‑standard rhombic form and the mounting hole with countersink make the insert suitable for external turning and for use on appropriate boring bars for internal operations. How does the PCD grade affect machining strategy? PCD provides very high wear resistance and stable cutting at increased speeds; for the DX120 grade this means fewer tool changes and more predictable process windows for high‑volume production. Which holders are compatible with this insert? Compatibility depends on the CCMT form, 7° clearance, 3.97 mm thickness and the hole/countersink specification; matching ISO‑compatible external holders or boring bars with the correct clamp/screw arrangement are required. What is the article number and manufacturer SKU for ordering? Article number 6822154, manufacturer SKU TUN6822154 correspond to the CCMT09T304 DX120 indexable insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Reliable wear resistance from the GH730 grade and precise chip control from the single-sided chipbreaker ensure productive turning with reduced downtime; the 0.4 mm nose radius and 80° rhombic geometry deliver consistent surface finish and repeatable clamping. Order the CCMT09T304 insert via Metav Werkzeuge or consult the technical team for process-adapted selection. CCMT 09T304 GH730 Tungaloy ISO turning insert — rhombic, 80° included angle, 0.4 mm radius The CCMT09T304 GH730 Tungaloy ISO turning insert is designed for external and internal turning, combining a robust carbide grade with a controlled chipforming geometry for stable, high-productivity machining. ISO rhombic insert CCMT 09T304 GH730 grade for wear resistance 80° cutting geometry for stable engagement 0.4 mm nose radius for fine finishing High-performance grade for longer tool life and stable cutting The combination of the GH730 cutting grade and a solid carbide substrate delivers a good balance of wear resistance and edge toughness, which supports longer tool life in demanding turning operations. The single-sided chip control geometry complements the grade by directing chips reliably away from the cutting zone, reducing interruptions and minimising tool-change frequency. This results in a measurable improvement in process uptime and consistent part quality when compared with less optimised insert grades. Geometry and clamping designed for repeatability and rigidity The rhombic ISO plate with an 80° included angle and a 7° clearance ensures secure seating in matched holders and predictable engagement during both external and internal turning. The insert includes a cylindrical centre hole with a one-sided countersink (40°–60°), and a plate thickness of 3.97 mm that supports stable clamping under moderate cutting forces. These dimensions contribute to repeatable positioning and reduced vibration, which together improve surface finish and dimensional stability across production runs. Process guidance: application scope and finishing capability Intended primarily for turning operations, the insert is suited to a wide range of machining tasks where the balance between wear resistance and edge stability is essential. The 0.4 mm nose radius helps achieve superior surface quality on fine finishing passes, while the single-sided chipbreaker should be chosen to match the workpiece material, cutting parameters and machine rigidity. For different batch sizes or materials, selecting the appropriate chipbreaker and cutting data will directly affect cycle times and overall machining economy; technical advice is available for process optimisation. For tailored advice on integrating the Tungaloy CCMT09T304 GH730 insert into specific turning processes, contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical data Article number: 6820970 Manufacturer SKU: TUN6820970 Label: CCMT09T304 GH730 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core technical data Carbide plate thickness: 3.97 mm Nose radius: 0.4 mm Included angle: 80° Clearance angle: 7° Plate size: 09 Special features Grade: GH730 Chipbreaker: one-sided Plate form: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Application: turning Material: carbide ISO designation: CCMT09T304 FAQ What work is this insert intended for? The CCMT09T304 GH730 insert is intended for external and internal turning and is optimised for stable chip control and wear resistance in general turning operations. How does the GH730 grade affect performance? The GH730 grade provides an improved balance between wear resistance and edge stability, which helps maintain tool life and consistent cutting performance under normal turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, clearance, tolerance class, fastening method, size and plate thickness; matching those parameters ensures proper seating of the CCMT09T304 insert. What finishing quality can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius supports fine finishing passes and can deliver improved surface finish when combined with appropriate feeds and speeds and a stable clamping setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, a 0.4 mm corner radius and ISO compatibility for steady, predictable turning performance; order original inserts via Metav Werkzeuge or request advice from our consultants to match grade and chipbreaker to the specific machining task. CCMT09T304 GH730 — CCMT turning insert by Tungaloy, 0.4 mm corner radius CCMT09T304 GH730 is an ISO‑standard indexable turning insert engineered for both external and internal turning operations where edge stability and repeatable wear behaviour are required. ISO-standard rhombic CCMT geometry GH730 grade for wear resistance 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Consistent tool life through a balanced carbide grade The GH730 composition, supplied by Tungaloy and applied to this indexable insert, provides a deliberate balance of wear resistance and toughness that helps maintain cutting-edge integrity under varied turning conditions. As a cemented carbide product, the insert resists abrasive wear while the grade optimises edge support; this reduces the frequency of edge changes and contributes to a more predictable tool life. Selecting a matching chipbreaker and application-specific grade minimises downtime and supports consistent component tolerances. Precise geometry for reliable mounting and repeatability Designed to ISO specifications, the rhombic CCMT form ensures compatibility with matching holders when the shape, relief angle, tolerance class, clamping style, size and thickness are observed. The insert features an 80° included angle and a 7° relief angle, with a plate thickness of 3.97 mm, which together provide a secure seat in the toolholder and repeatable positioning for serial production. The through-hole is cylindrical with a single‑side countersink (40°–60°) to suit standard clamping systems, aiding fast replacement and stable performance in both external and internal operations. Practical benefits for everyday turning workpieces With a corner radius of 0.4 mm, the insert offers a compromise between strength and finish capability: small enough for tighter radii yet robust enough to withstand interruptions or moderate feeds. The single-sided chipbreaker geometry supports controlled chip formation in a wide range of turning tasks; choosing the correct chipbreaker and the GH730 grade helps manage temperature and chip flow, which improves surface quality and reduces secondary operations. System assembly typically comprises the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws for quick servicing and minimal downtime. Integration into production and selection guidance For smooth integration into machining routines, consider the workpiece material, machine stability and cutting parameters when specifying the insert and holder. The insert is intended for turning and is part of an ISO insert system; matching the insert geometry and the GH730 material grade to the part geometry and cutting strategy yields the best balance of productivity and component quality. If further clarification is needed on holder compatibility or optimal cutting data, our technical team can provide guidance and help define the most economical setup. Contact Metav Werkzeuge for tailored advice on selecting Tungaloy CCMT09T304 GH730 inserts and to secure original factory‑new items directly through our distribution. Technical data Article number: 6820969 Manufacturer article number: 6820969 SKU: 6820969-Tungaloy Manufacturer SKU: TUN6820969 Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T304 GH730 Tungaloy‑insert Material: cemented carbide Facts Included angle: 80° Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Size: 09 Special features Grade: GH730 (Tungaloy) Rhombic CCMT plate form Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard indexable turning insert System assembly: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The CCMT09T304 GH730 indexable turning insert is designed for general turning; the GH730 grade complements the geometry by providing a balance of wear resistance and toughness suitable for a broad range of turning applications. How does the 0.4 mm corner radius affect cutting results? A 0.4 mm corner radius on the CCMT09T304 GH730 insert offers a compromise between edge strength and surface finish, enabling moderate feeds with good edge life while allowing tighter profile details than larger radii. Which holders are compatible with this ISO CCMT insert? Compatibility depends on holder form, relief angle, tolerance class, clamping style, size and thickness; the CCMT09T304 GH730 fits standard CCMT holders when these parameters match the insert specifications. Is the insert supplied as original Tungaloy product? Yes, the CCMT09T304 GH730 insert is supplied as an original, factory‑new product from Tungaloy; reference SKU 6820969‑Tungaloy for ordering and verification. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of the GH730 grade’s balanced wear resistance and toughness and the precise 80° rhomboid geometry for stable turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 GH730 turning insert — ISO rhomboid, 80° approach angle (Tungaloy) A CCMT09T304 GH730 indexable insert engineered for external and internal turning, featuring a rhomboid form, a single-sided chipbreaker and a cylindrical hole with a one-sided countersink. ISO rhombic insert, 80° cutting angle GH730 grade for wear resistance and toughness 0.4 mm corner radius for precise finishing Cylindrical hole with 40°–60° countersink Consistent machining performance for turning The CCMT09T304 is built on a carbide substrate and the GH730 grade, which complements the insert geometry to provide a deliberate balance between wear resistance and edge toughness. This balance reduces unexpected tool failure and sustains cutting performance across longer tool life cycles, making the insert suitable for a wide range of turning tasks. The integrated chip control and edge stability lead to fewer interruptions during batch runs and a more predictable production output. Secure seating and accurate tool engagement As an ISO-standardised rhomboid insert with an 80° approach angle and a 3.97 mm plate thickness, the component is dimensioned to ensure repeatable seating in compatible holders. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the supplied cylindrical hole with a one-sided countersink (40°–60°) facilitates secure clamping and accurate axial positioning. Reliable mechanical engagement reduces micro-movement during heavy cuts, which in turn improves dimensional consistency on turned components. Improved productivity through stable chip control and finishing The single-sided chipbreaker provides optimised chip formation for many turning operations, helping to evacuate swarf efficiently and maintain a stable cutting zone. The 0.4 mm corner radius offers a compromise between surface finish and edge strength, enabling fine finishing passes without sacrificing robustness. Together, the geometry and grade support higher metal removal rates where process security is required, while lowering the frequency of insert changes — a clear contribution to operational economy and time-saving on the shop floor. For consistent results with Tungaloy’s GH730 grade and to discuss holder compatibility or batch supply, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820968 SKU: 6820968-Tungaloy Manufacturer SKU: TUN6820968 Numbers / Core technical data Insert designation: CCMT09T304 Approach angle: 80° Corner radius: 0.4 mm Plate thickness: 3.97 mm Insert size: 09 Designs / Special features Rhomboid insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Carbide grade GH730 ISO-standardised turning insert FAQ Is this insert suitable for both external and internal turning? Yes. The CCMT09T304 GH730 insert is designed for external and internal turning; selection of the chipbreaker and grade should be matched to the workpiece material and the machining conditions. What determines compatibility with a tool holder? Compatibility is set by insert form, relief (frewinkel), tolerance class, fastening method, size and thickness; the CCMT09T304’s cylindrical hole plus countersink ensures secure clamping in holders designed for ISO rhomboid inserts. Which machining benefits does the GH730 grade provide? The GH730 grade adds a balance of wear resistance and toughness to the geometry, enhancing edge stability and extending useful tool life in a variety of turning operations. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius offers improved edge strength while enabling a fine surface finish on finishing passes; it is suitable where dimensional accuracy and good surface quality are required. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker is engineered to control chip formation and evacuation during turning, promoting a stable cutting zone and reducing the risk of chip interference with the workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of wear-resistant finishing, stable chip control and precise geometry to increase machining consistency and reduce tool changes; the compact design and secure clamping make it suitable for high-volume turning of steel components. Order the CCMT09T304 GT9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T304 GT9530 CCMT turning insert by Tungaloy – coated cermet, 0.4 mm nose radius CCMT09T304 GT9530 is a coated turning insert designed for precision finishing and light general-purpose turning of steel components ISO rhombic insert CCMT geometry Coated cermet grade GT9530 for finishing 0.4 mm nose radius for fine profiles With central hole and 40°–60° countersink Consistent finishing and longer tool life for steel turning The coated cermet composition of this insert, combined with the GT9530 grade, delivers a wear-resistant cutting edge that maintains surface integrity over extended runs. In practical terms, the advanced coating and substrate increase resistance to abrasion and maintain sharpness during stable machining conditions, which means fewer indexings and reduced downtime. This behaviour is particularly effective when fine surface quality is a priority; the result is a reliable, repeatable finish with lower scrap rates and improved throughput. Secure seating and geometry that simplifies setup Built to the ISO-standard dimensional system, the rhombic profile guarantees predictable seating and orientation in compatible toolholders. The rhombic shape with an integrated central hole and a cylindrical bore plus one-sided countersink (40°–60°) ensures solid clamping and accurate location during cutting. A 7° clearance reduces rubbing on the flank, while the plate thickness of 3.97 mm and standard size designation help ensure compatibility with a wide range of external holders and boring bars. For operators less familiar with insert mounting: check holder form, clearance angle, tolerance class, fastening method, size and thickness to confirm compatibility before first use. Practical guidance for tool selection and application The single-sided chipbreaker and the 0.4 mm nose radius are optimised for fine profiles and finishing passes; select the chipbreaker and the GT9530 grade when workpiece material and machine stability favour surface quality over aggressive metal removal. In settings where stable setups and moderate feed rates are achievable, the combination of wear-resistant cermet substrate and tailored chip control supports longer intervals between regrinds or indexings, improving process economy. For light turning operations on steel, this insert supports predictable chip formation and consistent dimensional accuracy, helping to streamline production planning and reduce rework. For precision finishing with extended tool life, request the Tungaloy GT9530 CCMT09T304 insert from Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 to confirm holder compatibility and optimal cutting data Technical data Article number: 6998305 Manufacturer SKU: TUN6998305 Metav SKU: 6998305-Tungaloy Model series: ISO turning inserts Name: CCMT09T304 GT9530 Tungaloy insert Specifications Corner radius: 0.4 mm Plate thickness: 3.97 mm Clearance angle: 7° Included angle (geometry): 80° Plate size: 09 Features Material: carbide Coating / grade: GT9530 (coated cermet) Plate form: rhombic Chipbreaker: single-sided Hole style: central cylindrical hole + one-sided countersink (40°–60°) Application: turning FAQ Is this insert suitable for finishing steel components? Yes. The GT9530 coated cermet insert is intended for wear-resistant finishing and light universal turning of steel; the grade provides improved surface quality and longer life under stable machining conditions. Which holder parameters determine compatibility with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, plate size and thickness; verify these features against the CCMT09T304 specification before mounting. What does the 0.4 mm nose radius mean for part quality? A 0.4 mm nose radius yields finer profile detail and smoother surface finish on turned parts, making the insert suitable for finishing passes and dimensional-critical features. Can this insert handle more aggressive roughing passes? The GT9530 grade is optimised for finishing to light general-purpose use; for aggressive roughing, a different grade or a tougher chipbreaker should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Achieve longer tool life and improved surface finish by combining the GT9530 coated cermet grade with the ISO rhombic CCMT geometry and 80° included angle; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT09T304 GT9530 CCMT indexable turning insert by Tungaloy — coated cermet, 80° rhombic geometry The CCMT09T304 GT9530 is an ISO rhombic indexable insert designed for precision external and internal turning in stable machining conditions, optimised for fine finishing and extended tool life GT9530 cermet for extended tool life ISO CCMT rhombic geometry, 80° included angle 0.4 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Greater tool life and consistent surface quality The GT9530 coated cermet grade provides a high level of wear resistance while maintaining a fine surface finish during finishing and light turning operations. Cermet combines ceramic hardness with metallic toughness, which reduces abrasive wear and supports longer cutting intervals under stable setups. This results in fewer insert changes and improved process reliability when consistent part appearance and dimensional stability are required. Seamless integration into ISO turning systems The insert follows the ISO CCMT format and the geometry is configured for reliable seating and repeatable positioning. Compatibility with a toolholder is defined by form, clearance angle, tolerance class, fastening method, size and thickness; the 80° included angle and 7° clearance angle ensure predictable cutting forces and easy toolpath programming. The ISO designation clarifies replacement choices and simplifies inventory management for production environments. Controlled chips and precise finishing in stable setups A single‑side chipbreaker is provided to aid chip control when conditions are steady and cutting parameters are matched to the material. The chipbreaker design supports predictable chip formation and evacuation, which helps to protect the cutting edge and maintain consistent surface quality. Selecting the correct chipbreaker and grade for the workpiece material and clamping stability will directly influence process efficiency and component finish. Practical recommendations for reliable machining The 0.4 mm corner radius and 3.97 mm thickness contribute to fine finishing capability while offering adequate strength for light turning tasks. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping; a matched holder, underlay/clamp set and replacement screws form the complete system. For best results, use a stable workpiece clamping, adjust feeds and speeds to the material, and verify seating to avoid vibration and premature wear. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy CCMT09T304 GT9530 insert; technical advice and delivery options are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998291 SKU: 6998291-Tungaloy Manufacturer SKU: TUN6998291 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Included angle: 80° Clearance (rake) angle: 7° Thickness: 3.97 mm Size designation: 09 ISO code: 09T304 Features and applications Coated cermet grade GT9530 Rhombic insert profile (CCMT) Single‑side chipbreaker Cylindrical hole with one‑side countersink (40°–60°) Intended use: external and internal turning System components: insert, holder, underlay/clamp set, replacement screws Material indication: carbide FAQ What materials is this grade suitable for? The GT9530-grade CCMT09T304 insert from Tungaloy is designed as a wear‑resistant coated cermet suited primarily for machining steel in finishing to light universal applications. How is compatibility with holders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT09T304 designation indicates the ISO format and should be matched with the corresponding holder, underlay/clamp set and fastening screws. Is this insert suitable for heavy roughing operations? The GT9530 grade is optimised for finishing and light universal turning; heavy roughing is not the intended primary use and may reduce tool life compared with grades designed for high‑load roughing. How does the chipbreaker affect machining? The single‑side chipbreaker on this insert is intended to improve chip control under stable conditions; selecting the correct chipbreaker and machining parameters contributes to consistent chip formation and reliable surface quality. What are the exact product identifiers for ordering? Article number 6998291, SKU 6998291-Tungaloy and manufacturer SKU TUN6998291 identify the Tungaloy CCMT09T304 GT9530 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated GT9530 cermet for longer tool life, 0.4 mm corner radius for fine finishing, and ISO compatibility for smooth integration into existing toolholders — order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice. CCMT 09T304 GT9530 Turning insert (ISO CCMT, rhombic) — Tungaloy CCMT 09T304 GT9530 is an ISO‑normed indexable turning insert designed for finishing to light universal turning of steel, offering a balanced mix of surface quality and extended tool life. Coated GT9530 cermet for longer tool life Rhombic CCMT shape, 80° cutting angle 0.4 mm corner radius for fine finishing With cylindrical hole and 40°–60° countersink Consistent surface finish and extended tool life The GT9530 grade is a coated cermet developed for wear resistance and reproducible edge stability in finishing and light universal turning of steel. The combination of coating and cermet substrate reduces flank wear and helps maintain a sharp cutting edge over longer toolpaths, which improves uptime and reduces the frequency of insert changes. For production environments where stable clamping and consistent part quality matter, this grade provides measurable benefits in surface integrity and component tolerances. Stable cutting geometry for external and internal turning The rhombic CCMT geometry with an 80° cutting angle and 7° clearance supports both external and internal turning operations where rigidity and repeatable chip control are required. The single‑sided chipbreaker is optimised for steel machining under stable conditions; it produces a controlled chip form that eases evacuation and minimises interruptions. In practical terms, the insert supports steady cutting parameters and predictable tool life, which simplifies process planning and reduces setup iterations. Precision mounting and ISO compatibility for quick tool changes As an ISO‑normed insert, the CCMT 09T304 is compatible with a wide range of standard CCMT toolholders. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), enabling secure clamping and precise seating. With a thickness of 3.97 mm and standard size designation 09, the insert fits conventional clamping systems that match form, free angle, tolerance class, fastening method, size and thickness. This compatibility reduces the need for special holders and supports fast changeovers in mixed‑tool production cells. Application guidance and recommended use case This grade is particularly suited to finishing and light universal turning of steel where a good surface finish and extended stand time are priorities. The 0.4 mm corner radius is sized for fine finishing tasks: it smooths peak micro‑irregularities while maintaining dimensional control. For less stable workholding or interrupted cuts, a more robust geometry or different chipbreaker might be preferable; for consistent conditions, the GT9530 insert provides an economical balance between surface quality and lifetime. If technical parameters or alternative grades are required, Metav Werkzeuge can advise on the best match for the specific machining scenario. For machining steel with high surface quality and extended tool life, request the CCMT 09T304 GT9530 insert through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical Data Article number: 6998301 SKU: TUN6998301 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Cutting angle: 80° Clearance angle: 7° Thickness: 3.97 mm Corner radius: 0.4 mm Size: 09 ISO code: 09T304 Special features Coated cermet grade GT9530 Material: carbide Rhombic CCMT plate form Single‑sided chipbreaker With cylindrical hole + one‑sided countersink (40°–60°) Suitable for external and internal turning of steel Intended for finishing to light universal turning FAQ What materials is this insert intended for? The CCMT 09T304 GT9530 insert is intended primarily for steel machining in finishing to light universal turning applications. Which toolholders are compatible with this insert? Compatibility follows ISO CCMT standards; the CCMT 09T304 fits standard CCMT external and internal turning holders that match form, free angle, tolerance class, fastening method, size and thickness. What benefits does the GT9530 grade offer? GT9530 is a coated cermet grade that offers improved wear resistance and longer stand time while delivering a consistently good surface finish in stable turning conditions. How does the 0.4 mm corner radius affect the finish? The 0.4 mm corner radius smooths minor surface irregularities and helps achieve tighter surface roughness values without compromising dimensional control during finishing passes. What is the manufacturer SKU and article number? The manufacturer SKU is TUN6998301 and the article number is 6998301, both referencing the CCMT 09T304 GT9530 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 grade and a precise 0.4 mm corner radius to achieve consistent finishes and extended tool life in turning operations; order directly via Metav Werkzeuge or consult our specialists for selection and application advice. CCMT 09T304 GT9530 — ISO rhombic indexable insert for turning, coated cermet, by Tungaloy The CCMT 09T304 GT9530 is an ISO rhombic indexable insert designed for external and internal turning, delivering a wear-resistant coated cermet grade for enhanced finishing and stable, long-run performance Wear-resistant GT9530 cermet grade ISO rhombic CCMT geometry for versatile turning 0.4 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Predictable tool life and consistent surface finish The coated GT9530 grade is formulated for wear-resistant finishing and light universal turning of steel under stable conditions, providing longer intervals between indexings. As an indexable insert with a 0.4 mm corner radius, this geometry favours fine surface quality while retaining edge strength for repeated use. The controlled coating and substrate combination reduces flank wear and preserves dimensional accuracy, which helps to maintain batch-to-batch consistency and fewer reworks in production. For operations prioritising surface integrity and predictable productivity, the insert offers a balance of longevity and finish quality. Seamless integration with ISO turning systems Compatibility with toolholders is ensured by standardised ISO form, relief and tolerance classes; the rhombic CCMT outline and mounting hole mean straightforward fitment in a wide range of external holders and boring bars. The insert’s cylindrical hole with 40°–60° single-sided countersink secures repeatable clamping and precise seating, reducing chatter risk and simplifying changeover. With a 7° relief angle and a plate thickness of 3.97 mm, this geometry supports stable cutting conditions and predictable cutting engagement, enabling efficient set-up and consistent repeatability across different machines and fixtures. Chip control and grade design for stable machining The single-sided chipbreaker and the GT9530 composition are engineered to promote orderly chip formation during finishing and light turning cycles; this lowers the chance of surface damage and eases chip evacuation in confined setups. The grade’s characteristics are tailored for steel machining where a high-quality surface and extended wear resistance are required under steady, well-supported cutting conditions. The insert’s profile and chipbreaker reduce the need for extensive process adjustments, allowing operators to focus on machining efficiency and throughput. Operational benefits that support productivity Using this ISO rhombic insert reduces downtime for insert changes and supports longer productive runs thanks to the combination of a resilient grade and robust geometry. Fewer indexings translate into lower tool inventory movement and simpler tool management, while the improved surface finish can shorten downstream polishing or finishing steps. For workshops aiming to harmonise process reliability with ease of handling, the insert delivers measurable operational advantages and contributes to overall cost-effectiveness without compromising component quality. Contact Metav Werkzeuge for tailored application advice and to source CCMT 09T304 GT9530 inserts from Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Article number: 6998295 Manufacturer SKU: TUN6998295 SKU: 6998295-Tungaloy Model series: ISO turning inserts Designation: CCMT09T304 GT9530 Tungaloy insert Facts Shape: rhombic (CCMT) Size: 09 Corner radius: 0.4 mm Relief angle: 7° Thickness: 3.97 mm Insert angle / approach angle: 80° Special features Grade/coating: GT9530 (coated cermet) Substrate / material: Hartmetall (cemented carbide) Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert suited for? The CCMT 09T304 GT9530 insert is optimised for machining steel in finishing and light universal turning operations, where a good surface finish and longer wear life are required. How does the GT9530 grade affect tool life? The GT9530 coated cermet grade provides enhanced wear resistance and stable edge retention, extending service intervals compared with conventional finishing grades under steady cutting conditions. Is the insert compatible with standard ISO holders? Yes, the CCMT geometry and the standard hole and tolerance design allow compatibility with ISO-standard external holders and boring bars when the holder matches the insert form and size. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength with the ability to achieve a fine surface finish, reducing the risk of tool edge chipping while improving part appearance. Does the insert include a chipbreaker for improved chip control? The insert is supplied with a single-sided chipbreaker designed to promote orderly chip formation in finishing and light turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the declared material is "Hartmetall" while the cutting-material type is specified as "beschichtetes Cermet". Please verify the product specifications and correct the source data to ensure accuracy and consistency in the information provided, as discrepancies like this can lead to errors in manufacturing processes, incorrect product categorisation, or potential issues in quality control. It is essential to cross-check the declared material and cutting-material type against the original documentation or technical data sheets to confirm whether the discrepancy is due to a typographical error, outdated information, or an incorrect entry in the database, and take appropriate corrective actions to maintain data integrity.
CCMT 09T304 H13A Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for insert CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304KFH13A-SANDVIK Facts and Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T304-H13A-Sandvik 40END
CCMT 09T304 H13A Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304KMH13A-SANDVIK ISO-Code: CCMT09T304 Grade: H13A Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-H13A-Sandvik 40END
CCMT 09T304 H13A Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304UMH13A-SANDVIK Facts / Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-H13A-Sandvik 40END
CCMT 09T304 IB55 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Performance features for CCMT 09T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304TIB55 Series: TURNING CBN ISO-Code: CCMT09T304 Grade: IB55 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-09T304-IB55-ISCAR 40END
CCMT 09T304 IC20 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details for indexable inserts CCMT 09T304 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-SMIC20 Facts & Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING UNCOATED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-09T304-IC20-ISCAR 40END
CCMT 09T304 IC20 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for inserts CCMT 09T304 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-14IC20 Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING UNCOATED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-09T304-IC20-ISCAR 40END
CCMT 09T304 IC20N Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts CCMT 09T304 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304IC20N Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-09T304-IC20N-ISCAR 40END
CCMT 09T304 IC428 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts CCMT 09T304 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-SMIC428 Facts & Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC428 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-09T304-IC428-ISCAR 40END
CCMT 09T304 IC5005 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CCMT 09T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-SMIC5005 Facts for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-09T304-IC5005-ISCAR 40END
CCMT 09T304 IC5010 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 09T304 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-SMIC5010 Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: IC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-09T304-IC5010-ISCAR 40END
CCMT 09T304 IC520N Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Detail specifications for indexable inserts CCMT 09T304 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304IC520N Series: TURNING CERMET ISO-Code: CCMT09T304 Grade: IC520N Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-09T304-IC520N-ISCAR 40END
CCMT 09T304 IC520N Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for CCMT 09T304 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT09T304-FPCIC520N Facts & Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: IC520N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-09T304-IC520N-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com